def connect(ui_object, attr_name, weight_list):
current_enums = ui_object.attr(attr_name).getEnums()
switch_attrs = []
for i in range(0, len(current_enums)):
switch_attrs.append(current_enums[i])
_logger.debug(ui_object)
_logger.debug(switch_attrs)
_logger.debug(weight_list)
for i, enum in enumerate(switch_attrs):
if not weight_list[i].inputs():
cond_node = node.createConditionNode(
firstTerm=ui_object.attr(attr_name),
secondTerm=switch_attrs.index(enum),
operator=0,
ifTrue=True,
ifFalse=False)
cond_node.outColor.outColorR.connect(weight_list[i])
cond_node.colorIfFalseR.set(0)
def addOperators(self):
"""Create operators and set the relations for the component rig
Apply operators, constraints, expressions to the hierarchy.
In order to keep the code clean and easier to debug,
we shouldn't create any new object in this method.
"""
# setup out channels. This channels are pass through for stack
node.createPlusMinusAverage1D(
[self.mid_wide_att, self.mid_wide_in_att, -1.0], 1,
self.mid_wide_out_att)
node.createPlusMinusAverage1D(
[self.mid_depth_att, self.mid_depth_in_att, -1.0], 1,
self.mid_depth_out_att)
node.createPlusMinusAverage1D(
[self.tip_wide_att, self.tip_wide_in_att, -1.0], 1,
self.tip_wide_out_att)
node.createPlusMinusAverage1D(
[self.tip_depth_att, self.tip_depth_in_att, -1.0], 1,
self.tip_depth_out_att)
node.createPlusMinusAverage1D(
[self.mid_twist_att, self.mid_twist_in_att], 1,
self.mid_twist_out_att)
node.createPlusMinusAverage1D(
[self.tip_twist_att, self.tip_twist_in_att], 1,
self.tip_twist_out_att)
if not self.settings["simpleFK"]:
dm_node_scl = node.createDecomposeMatrixNode(self.root.worldMatrix)
if self.settings["keepLength"]:
arclen_node = pm.arclen(self.mst_crv, ch=True)
alAttr = pm.getAttr(arclen_node + ".arcLength")
ration_node = node.createMulNode(self.length_ratio_att, alAttr)
pm.addAttr(self.mst_crv, ln="length_ratio", k=True, w=True)
node.createDivNode(arclen_node.arcLength, ration_node.outputX,
self.mst_crv.length_ratio)
div_node_scl = node.createDivNode(self.mst_crv.length_ratio,
dm_node_scl.outputScaleX)
step = 1.000 / (self.def_number - 1)
step_mid = 1.000 / ((self.def_number - 1) / 2.0)
u = 0.000
u_mid = 0.000
pass_mid = False
for i in range(self.def_number):
cnsUpv = applyop.pathCns(self.upv_cns[i],
self.upv_crv,
cnsType=False,
u=u,
tangent=False)
cns = applyop.pathCns(self.div_cns[i], self.mst_crv, False, u,
True)
# Connecting the scale for scaling compensation
# for axis, AX in zip("xyz", "XYZ"):
for axis, AX in zip("x", "X"):
pm.connectAttr(
dm_node_scl.attr("outputScale{}".format(AX)),
self.div_cns[i].attr("s{}".format(axis)))
if self.settings["keepLength"]:
div_node2 = node.createDivNode(u, div_node_scl.outputX)
cond_node = node.createConditionNode(
div_node2.input1X, div_node2.outputX, 4,
div_node2.input1X, div_node2.outputX)
pm.connectAttr(cond_node + ".outColorR",
cnsUpv + ".uValue")
pm.connectAttr(cond_node + ".outColorR", cns + ".uValue")
cns.setAttr("worldUpType", 1)
cns.setAttr("frontAxis", 0)
cns.setAttr("upAxis", 1)
pm.connectAttr(self.upv_cns[i].attr("worldMatrix[0]"),
cns.attr("worldUpMatrix"))
# Connect scale Wide and Depth
# wide and Depth
mid_mul_node = node.createMulNode(
[self.mid_wide_att, self.mid_depth_att],
[self.mid_wide_in_att, self.mid_depth_in_att])
mid_mul_node2 = node.createMulNode(
[mid_mul_node.outputX, mid_mul_node.outputY],
[u_mid, u_mid])
mid_mul_node3 = node.createMulNode(
[mid_mul_node2.outputX, mid_mul_node2.outputY], [
dm_node_scl.attr("outputScaleX"),
dm_node_scl.attr("outputScaleY")
])
tip_mul_node = node.createMulNode(
[self.tip_wide_att, self.tip_depth_att],
[self.tip_wide_in_att, self.tip_depth_in_att])
tip_mul_node2 = node.createMulNode(
[tip_mul_node.outputX, tip_mul_node.outputY], [u, u])
node.createPlusMinusAverage1D([
mid_mul_node3.outputX, 1.0 - u_mid, tip_mul_node2.outputX,
1.0 - u, -1.0
], 1, self.div_cns[i].attr("sy"))
node.createPlusMinusAverage1D([
mid_mul_node3.outputY, 1.0 - u_mid, tip_mul_node2.outputY,
1.0 - u, -1.0
], 1, self.div_cns[i].attr("sz"))
# Connect Twist "cns.frontTwist"
twist_mul_node = node.createMulNode(
[self.mid_twist_att, self.tip_twist_att], [u_mid, u])
twist_mul_node2 = node.createMulNode(
[self.mid_twist_in_att, self.tip_twist_in_att], [u_mid, u])
node.createPlusMinusAverage1D([
twist_mul_node.outputX,
twist_mul_node.outputY,
twist_mul_node2.outputX,
twist_mul_node2.outputY,
], 1, cns.frontTwist)
# u_mid calc
if u_mid >= 1.0 or pass_mid:
u_mid -= step_mid
pass_mid = True
else:
u_mid += step_mid
if u_mid > 1.0:
u_mid = 1.0
# ensure the tip is never affected byt the mid
if i == (self.def_number - 1):
u_mid = 0.0
u += step
if self.settings["keepLength"]:
# add the safty distance offset
self.tweakTip_npo.attr("tx").set(self.off_dist)
# connect vis line ref
for shp in self.line_ref.getShapes():
pm.connectAttr(self.ikVis_att, shp.attr("visibility"))
# CONNECT STACK
# master components
mstr_global = self.settings["masterChainGlobal"]
mstr_local = self.settings["masterChainLocal"]
if mstr_global:
mstr_global = self.rig.components[mstr_global]
if mstr_local:
mstr_local = self.rig.components[mstr_local]
# connect twist and scale
if mstr_global and mstr_local:
node.createPlusMinusAverage1D([
mstr_global.root.mid_twist_out, mstr_local.root.mid_twist_out
], 1, self.mid_twist_in_att)
node.createPlusMinusAverage1D([
mstr_global.root.tip_twist_out, mstr_local.root.tip_twist_out
], 1, self.tip_twist_in_att)
node.createPlusMinusAverage1D([
mstr_global.root.mid_wide_out, mstr_local.root.mid_wide_out, -1
], 1, self.mid_wide_in_att)
node.createPlusMinusAverage1D([
mstr_global.root.tip_wide_out, mstr_local.root.tip_wide_out, -1
], 1, self.tip_wide_in_att)
node.createPlusMinusAverage1D([
mstr_global.root.mid_depth_out, mstr_local.root.mid_depth_out,
-1
], 1, self.mid_depth_in_att)
node.createPlusMinusAverage1D([
mstr_global.root.tip_depth_out, mstr_local.root.tip_depth_out,
-1
], 1, self.tip_depth_in_att)
elif mstr_local or mstr_global:
for master_chain in [mstr_local, mstr_global]:
if master_chain:
pm.connectAttr(master_chain.root.mid_twist_out,
self.mid_twist_in_att)
pm.connectAttr(master_chain.root.tip_twist_out,
self.tip_twist_in_att)
pm.connectAttr(master_chain.root.mid_wide_out,
self.mid_wide_in_att)
pm.connectAttr(master_chain.root.tip_wide_out,
self.tip_wide_in_att)
pm.connectAttr(master_chain.root.mid_depth_out,
self.mid_depth_in_att)
pm.connectAttr(master_chain.root.tip_depth_out,
self.tip_depth_in_att)
# connect the fk chain ctls
for e, ctl in enumerate(self.fk_ctl):
# connect out
out_loc = self.fk_local_out[e]
applyop.gear_mulmatrix_op(ctl.attr("worldMatrix"),
out_loc.attr("parentInverseMatrix[0]"),
out_loc)
out_glob = self.fk_global_out[e]
out_ref = self.fk_global_ref[e]
applyop.gear_mulmatrix_op(out_ref.attr("worldMatrix"),
out_glob.attr("parentInverseMatrix[0]"),
out_glob)
# connect in global
if mstr_global:
self.connect_master(mstr_global.fk_global_out,
self.fk_global_in, e,
self.settings["cnxOffset"])
# connect in local
if mstr_local:
self.connect_master(mstr_local.fk_local_out, self.fk_local_in,
e, self.settings["cnxOffset"])
for shp in ctl.getShapes():
pm.connectAttr(self.fkVis_att, shp.attr("visibility"))
for ctl in self.tweak_ctl:
for shp in ctl.getShapes():
pm.connectAttr(self.ikVis_att, shp.attr("visibility"))
if self.settings["extraTweak"]:
for tweak_ctl in self.extratweak_ctl:
for shp in tweak_ctl.getShapes():
pm.connectAttr(self.tweakVis_att, shp.attr("visibility"))
def addOperators(self):
"""Create operators and set the relations for the component rig
Apply operators, constraints, expressions to the hierarchy.
In order to keep the code clean and easier to debug,
we shouldn't create any new object in this method.
"""
dm_node_scl = node.createDecomposeMatrixNode(self.root.worldMatrix)
if self.settings["keepLength"]:
arclen_node = pm.arclen(self.mst_crv, ch=True)
alAttr = pm.getAttr(arclen_node + ".arcLength")
ration_node = node.createMulNode(self.length_ratio_att, alAttr)
pm.addAttr(self.mst_crv, ln="length_ratio", k=True, w=True)
node.createDivNode(arclen_node.arcLength, ration_node.outputX,
self.mst_crv.length_ratio)
div_node_scl = node.createDivNode(self.mst_crv.length_ratio,
dm_node_scl.outputScaleX)
step = 1.000 / (self.def_number - 1)
u = 0.000
for i in range(self.def_number):
cnsUpv = applyop.pathCns(self.upv_cns[i],
self.upv_crv,
cnsType=False,
u=u,
tangent=False)
cns = applyop.pathCns(self.div_cns[i], self.mst_crv, False, u,
True)
# Connectiong the scale for scaling compensation
for axis, AX in zip("xyz", "XYZ"):
pm.connectAttr(dm_node_scl.attr("outputScale{}".format(AX)),
self.div_cns[i].attr("s{}".format(axis)))
if self.settings["keepLength"]:
div_node2 = node.createDivNode(u, div_node_scl.outputX)
cond_node = node.createConditionNode(div_node2.input1X,
div_node2.outputX, 4,
div_node2.input1X,
div_node2.outputX)
pm.connectAttr(cond_node + ".outColorR", cnsUpv + ".uValue")
pm.connectAttr(cond_node + ".outColorR", cns + ".uValue")
cns.setAttr("worldUpType", 1)
cns.setAttr("frontAxis", 0)
cns.setAttr("upAxis", 1)
pm.connectAttr(self.upv_cns[i].attr("worldMatrix[0]"),
cns.attr("worldUpMatrix"))
u += step
if self.settings["keepLength"]:
# add the safty distance offset
self.tweakTip_npo.attr("tx").set(self.off_dist)
# connect vis line ref
for shp in self.line_ref.getShapes():
pm.connectAttr(self.ikVis_att, shp.attr("visibility"))
for ctl in self.tweak_ctl:
for shp in ctl.getShapes():
pm.connectAttr(self.ikVis_att, shp.attr("visibility"))
for ctl in self.fk_ctl:
for shp in ctl.getShapes():
pm.connectAttr(self.fkVis_att, shp.attr("visibility"))
if self.settings["extraTweak"]:
for tweak_ctl in self.extratweak_ctl:
for shp in tweak_ctl.getShapes():
pm.connectAttr(self.tweakVis_att, shp.attr("visibility"))
def addOperators(self):
"""Create operators and set the relations for the component rig
Apply operators, constraints, expressions to the hierarchy.
In order to keep the code clean and easier to debug,
we shouldn't create any new object in this method.
"""
# Soft condition
soft_cond_node = node.createConditionNode(
self.soft_attr,
0.0001,
4,
0.0001,
self.soft_attr)
self.soft_attr_cond = soft_cond_node.outColorR
if self.settings["ikSolver"]:
self.ikSolver = "ikRPsolver"
else:
pm.mel.eval("ikSpringSolver;")
self.ikSolver = "ikSpringSolver"
# 1 bone chain Upv ref ===============================
self.ikHandleUpvRef = primitive.addIkHandle(
self.root,
self.getName("ikHandleLegChainUpvRef"),
self.legChainUpvRef,
"ikSCsolver")
pm.pointConstraint(self.ik_ctl, self.ikHandleUpvRef)
pm.parentConstraint(self.legChainUpvRef[0], self.upv_cns, mo=True)
# mid joints ================================================
for xjnt, midJ in zip(self.legBones[1:3],
[self.mid1_jnt, self.mid2_jnt]):
node.createPairBlend(None, xjnt, .5, 1, midJ)
pm.connectAttr(xjnt + ".translate", midJ + ".translate", f=True)
pm.parentConstraint(self.mid1_jnt, self.knee_lvl)
pm.parentConstraint(self.mid2_jnt, self.ankle_lvl)
# joint length multiply
multJnt1_node = node.createMulNode(self.boneALenght_attr,
self.boneALenghtMult_attr)
multJnt2_node = node.createMulNode(self.boneBLenght_attr,
self.boneBLenghtMult_attr)
multJnt3_node = node.createMulNode(self.boneCLenght_attr,
self.boneCLenghtMult_attr)
# # IK 3 bones ===============================================
self.ikHandle = primitive.addIkHandle(self.softblendLoc,
self.getName("ik3BonesHandle"),
self.chain3bones,
self.ikSolver,
self.upv_ctl)
# TwistTest
if [round(elem, 4)
for elem in transform.getTranslation(self.chain3bones[1])] \
!= [round(elem, 4) for elem in self.guide.apos[1]]:
add_nodeTwist = node.createAddNode(180.0, self.roll_att)
else:
add_nodeTwist = node.createAddNode(0, self.roll_att)
if self.negate:
mulVal = 1
else:
mulVal = -1
node.createMulNode(
add_nodeTwist + ".output", mulVal, self.ikHandle.attr("twist"))
# stable spring solver doble rotation
pm.pointConstraint(self.root_ctl, self.chain3bones[0])
# softIK 3 bones operators
applyop.aimCns(self.aim_tra,
self.ik_ref,
axis="zx",
wupType=4,
wupVector=[1, 0, 0],
wupObject=self.root_ctl,
maintainOffset=False)
plusTotalLength_node = node.createPlusMinusAverage1D(
[multJnt1_node.attr("outputX"),
multJnt2_node.attr("outputX"),
multJnt3_node.attr("outputX")])
subtract1_node = node.createPlusMinusAverage1D(
[plusTotalLength_node.attr("output1D"), self.soft_attr_cond], 2)
distance1_node = node.createDistNode(self.ik_ref, self.aim_tra)
div1_node = node.createDivNode(1.0, self.rig.global_ctl + ".sx")
mult1_node = node.createMulNode(distance1_node + ".distance",
div1_node + ".outputX")
subtract2_node = node.createPlusMinusAverage1D(
[mult1_node.attr("outputX"), subtract1_node.attr("output1D")], 2)
div2_node = node.createDivNode(subtract2_node + ".output1D",
self.soft_attr_cond)
mult2_node = node.createMulNode(-1, div2_node + ".outputX")
power_node = node.createPowNode(self.softSpeed_attr,
mult2_node + ".outputX")
mult3_node = node.createMulNode(self.soft_attr_cond,
power_node + ".outputX")
subtract3_node = node.createPlusMinusAverage1D(
[plusTotalLength_node.attr("output1D"),
mult3_node.attr("outputX")],
2)
cond1_node = node.createConditionNode(
self.soft_attr_cond,
0,
2,
subtract3_node + ".output1D",
plusTotalLength_node + ".output1D")
cond2_node = node.createConditionNode(mult1_node + ".outputX",
subtract1_node + ".output1D",
2, cond1_node + ".outColorR",
mult1_node + ".outputX")
pm.connectAttr(cond2_node + ".outColorR", self.wristSoftIK + ".tz")
# soft blend
pc_node = pm.pointConstraint(self.wristSoftIK,
self.ik_ref,
self.softblendLoc)
node.createReverseNode(self.stretch_attr,
pc_node + ".target[0].targetWeight")
pm.connectAttr(self.stretch_attr,
pc_node + ".target[1].targetWeight",
f=True)
# Stretch
distance2_node = node.createDistNode(self.softblendLoc,
self.wristSoftIK)
mult4_node = node.createMulNode(distance2_node + ".distance",
div1_node + ".outputX")
# bones
for i, mulNode in enumerate([multJnt1_node,
multJnt2_node,
multJnt3_node]):
div3_node = node.createDivNode(mulNode + ".outputX",
plusTotalLength_node + ".output1D")
mult5_node = node.createMulNode(mult4_node + ".outputX",
div3_node + ".outputX")
mult6_node = node.createMulNode(self.stretch_attr,
mult5_node + ".outputX")
node.createPlusMinusAverage1D(
[mulNode.attr("outputX"), mult6_node.attr("outputX")],
1,
self.chain3bones[i + 1] + ".tx")
# IK 2 bones ===============================================
self.ikHandle2 = primitive.addIkHandle(self.softblendLoc2,
self.getName("ik2BonesHandle"),
self.chain2bones,
self.ikSolver,
self.upv_ctl)
node.createMulNode(self.roll_att, mulVal, self.ikHandle2.attr("twist"))
# stable spring solver doble rotation
pm.pointConstraint(self.root_ctl, self.chain2bones[0])
parentc_node = pm.parentConstraint(
self.ik2b_ikCtl_ref, self.ik2b_bone_ref, self.ik2b_blend)
node.createReverseNode(self.fullIK_attr,
parentc_node + ".target[0].targetWeight")
pm.connectAttr(self.fullIK_attr,
parentc_node + ".target[1].targetWeight", f=True)
# softIK 2 bones operators
applyop.aimCns(self.aim_tra2,
self.ik2b_ik_ref,
axis="zx",
wupType=4,
wupVector=[1, 0, 0],
wupObject=self.root_ctl,
maintainOffset=False)
plusTotalLength_node = node.createPlusMinusAverage1D(
[multJnt1_node.attr("outputX"), multJnt2_node.attr("outputX")])
subtract1_node = node.createPlusMinusAverage1D(
[plusTotalLength_node.attr("output1D"), self.soft_attr_cond], 2)
distance1_node = node.createDistNode(self.ik2b_ik_ref, self.aim_tra2)
div1_node = node.createDivNode(1, self.rig.global_ctl + ".sx")
mult1_node = node.createMulNode(distance1_node + ".distance",
div1_node + ".outputX")
subtract2_node = node.createPlusMinusAverage1D(
[mult1_node.attr("outputX"), subtract1_node.attr("output1D")], 2)
div2_node = node.createDivNode(subtract2_node + ".output1D",
self.soft_attr_cond)
mult2_node = node.createMulNode(-1, div2_node + ".outputX")
power_node = node.createPowNode(self.softSpeed_attr,
mult2_node + ".outputX")
mult3_node = node.createMulNode(self.soft_attr_cond,
power_node + ".outputX")
subtract3_node = node.createPlusMinusAverage1D(
[plusTotalLength_node.attr("output1D"),
mult3_node.attr("outputX")],
2)
cond1_node = node.createConditionNode(
self.soft_attr_cond,
0,
2,
subtract3_node + ".output1D",
plusTotalLength_node + ".output1D")
cond2_node = node.createConditionNode(mult1_node + ".outputX",
subtract1_node + ".output1D",
2,
cond1_node + ".outColorR",
mult1_node + ".outputX")
pm.connectAttr(cond2_node + ".outColorR", self.ankleSoftIK + ".tz")
# soft blend
pc_node = pm.pointConstraint(self.ankleSoftIK,
self.ik2b_ik_ref,
self.softblendLoc2)
node.createReverseNode(self.stretch_attr,
pc_node + ".target[0].targetWeight")
pm.connectAttr(self.stretch_attr,
pc_node + ".target[1].targetWeight",
f=True)
# Stretch
distance2_node = node.createDistNode(self.softblendLoc2,
self.ankleSoftIK)
mult4_node = node.createMulNode(distance2_node + ".distance",
div1_node + ".outputX")
for i, mulNode in enumerate([multJnt1_node, multJnt2_node]):
div3_node = node.createDivNode(mulNode + ".outputX",
plusTotalLength_node + ".output1D")
mult5_node = node.createMulNode(mult4_node + ".outputX",
div3_node + ".outputX")
mult6_node = node.createMulNode(self.stretch_attr,
mult5_node + ".outputX")
node.createPlusMinusAverage1D([mulNode.attr("outputX"),
mult6_node.attr("outputX")],
1,
self.chain2bones[i + 1] + ".tx")
# IK/FK connections
for i, x in enumerate(self.fk_ctl):
pm.parentConstraint(x, self.legBonesFK[i], mo=True)
for i, x in enumerate([self.chain2bones[0], self.chain2bones[1]]):
pm.parentConstraint(x, self.legBonesIK[i], mo=True)
pm.pointConstraint(self.ik2b_ik_ref, self.legBonesIK[2])
applyop.aimCns(self.legBonesIK[2],
self.roll_ctl,
axis="xy",
wupType=4,
wupVector=[0, 1, 0],
wupObject=self.legBonesIK[1],
maintainOffset=False)
pm.connectAttr(self.chain3bones[-1].attr("tx"),
self.legBonesIK[-1].attr("tx"))
# foot twist roll
pm.orientConstraint(self.ik_ref, self.legBonesIK[-1], mo=True)
node.createMulNode(
-1, self.chain3bones[-1].attr("tx"), self.ik2b_ik_ref.attr("tx"))
for i, x in enumerate(self.legBones):
node.createPairBlend(
self.legBonesFK[i], self.legBonesIK[i], self.blend_att, 1, x)
# Twist references ----------------------------------------
self.ikhArmRef, self.tmpCrv = applyop.splineIK(
self.getName("legRollRef"),
self.rollRef,
parent=self.root,
cParent=self.legBones[0])
initRound = .001
multVal = 1
multTangent_node = node.createMulNode(self.roundnessKnee_att, multVal)
add_node = node.createAddNode(multTangent_node + ".outputX", initRound)
pm.connectAttr(add_node + ".output", self.tws1_rot.attr("sx"))
for x in ["translate"]:
pm.connectAttr(self.knee_ctl.attr(x), self.tws1_loc.attr(x))
for x in "xy":
pm.connectAttr(self.knee_ctl.attr("r" + x),
self.tws1_loc.attr("r" + x))
multTangent_node = node.createMulNode(self.roundnessAnkle_att, multVal)
add_node = node.createAddNode(multTangent_node + ".outputX", initRound)
pm.connectAttr(add_node + ".output", self.tws2_rot.attr("sx"))
for x in ["translate"]:
pm.connectAttr(self.ankle_ctl.attr(x), self.tws2_loc.attr(x))
for x in "xy":
pm.connectAttr(self.ankle_ctl.attr("r" + x),
self.tws2_loc.attr("r" + x))
# Volume -------------------------------------------
distA_node = node.createDistNode(self.tws0_loc, self.tws1_loc)
distB_node = node.createDistNode(self.tws1_loc, self.tws2_loc)
distC_node = node.createDistNode(self.tws2_loc, self.tws3_loc)
add_node = node.createAddNode(distA_node + ".distance",
distB_node + ".distance")
add_node2 = node.createAddNode(distC_node + ".distance",
add_node + ".output")
div_node = node.createDivNode(add_node2 + ".output",
self.root_ctl.attr("sx"))
# comp scaling
dm_node = node.createDecomposeMatrixNode(self.root.attr("worldMatrix"))
div_node2 = node.createDivNode(div_node + ".outputX",
dm_node + ".outputScaleX")
self.volDriver_att = div_node2 + ".outputX"
# Flip Offset ----------------------------------------
pm.connectAttr(self.ankleFlipOffset_att, self.tws2_loc.attr("rz"))
pm.connectAttr(self.kneeFlipOffset_att, self.tws1_loc.attr("rz"))
# Divisions ----------------------------------------
# at 0 or 1 the division will follow exactly the rotation of the
# controler.. and we wont have this nice tangent + roll
for i, div_cns in enumerate(self.div_cns):
subdiv = False
if i == len(self.div_cns) - 1 or i == 0:
subdiv = 45
else:
subdiv = 45
if i < (self.settings["div0"] + 1):
perc = i * .333 / (self.settings["div0"] + 1.0)
elif i < (self.settings["div0"] + self.settings["div1"] + 2):
perc = i * .333 / (self.settings["div0"] + 1.0)
else:
perc = (.5
+ (i - self.settings["div0"] - 3.0)
* .5
/ (self.settings["div1"] + 1.0))
if i < (self.settings["div0"] + 2):
perc = i * .333 / (self.settings["div0"] + 1.0)
elif i < (self.settings["div0"] + self.settings["div1"] + 3):
perc = (.333
+ (i - self.settings["div0"] - 1)
* .333
/ (self.settings["div1"] + 1.0))
else:
perc = (.666
+ (i
- self.settings["div1"]
- self.settings["div0"]
- 2.0)
* .333
/ (self.settings["div2"] + 1.0))
# we neet to offset the ankle and knee point to force the bone
# orientation to the nex bone span
if perc == .333:
perc = .3338
elif perc == .666:
perc = .6669
perc = max(.001, min(.999, perc))
# Roll
cts = [self.tws0_rot, self.tws1_rot, self.tws2_rot, self.tws3_rot]
o_node = applyop.gear_rollsplinekine_op(div_cns, cts, perc, subdiv)
pm.connectAttr(self.resample_att, o_node + ".resample")
pm.connectAttr(self.absolute_att, o_node + ".absolute")
# Squash n Stretch
o_node = applyop.gear_squashstretch2_op(
div_cns, None,
pm.getAttr(self.volDriver_att),
"x")
pm.connectAttr(self.volume_att, o_node + ".blend")
pm.connectAttr(self.volDriver_att, o_node + ".driver")
pm.connectAttr(self.st_att[i], o_node + ".stretch")
pm.connectAttr(self.sq_att[i], o_node + ".squash")
# Visibilities -------------------------------------
# fk
fkvis_node = node.createReverseNode(self.blend_att)
for ctrl in self.fk_ctl:
for shp in ctrl.getShapes():
pm.connectAttr(fkvis_node + ".outputX", shp.attr("visibility"))
# ik
for ctrl in [self.ik_ctl, self.roll_ctl, self.upv_ctl, self.line_ref]:
for shp in ctrl.getShapes():
pm.connectAttr(self.blend_att, shp.attr("visibility"))
# setup leg o_node scale compensate
pm.connectAttr(self.rig.global_ctl + ".scale", self.setup + ".scale")
# match IK/FK ref
pm.parentConstraint(self.legBones[0], self.match_fk0_off, mo=True)
pm.parentConstraint(self.legBones[1], self.match_fk1_off, mo=True)
pm.parentConstraint(self.legBones[2], self.match_fk2_off, mo=True)
return
def addOperators(self):
"""Create operators and set the relations for the component rig
Apply operators, constraints, expressions to the hierarchy.
In order to keep the code clean and easier to debug,
we shouldn't create any new object in this method.
"""
# Curves -------------------------------------------
op = applyop.gear_curveslide2_op(
self.slv_crv, self.mst_crv, 0, 1.5, .5, .5)
pm.connectAttr(self.position_att, op + ".position")
pm.connectAttr(self.lenght_att, op + ".maxstretch")
op = applyop.gear_curveslide2_op(
self.slv_upv_crv, self.upv_crv, 0, 1.5, .5, .5)
pm.connectAttr(self.position_att, op + ".position")
pm.connectAttr(self.lenght_att, op + ".maxstretch")
for tang in self.tangentsCtl:
for shp in tang.getShapes():
pm.connectAttr(self.tangentsVis_att, shp.attr("visibility"))
for twnpo, fkctl in zip(self.tweak_npo, self.fk_ctl):
intMatrix = applyop.gear_intmatrix_op(
fkctl.attr("worldMatrix"),
fkctl.getParent().attr("worldMatrix"),
.5)
applyop.gear_mulmatrix_op(intMatrix.attr("output"),
twnpo.attr("parentInverseMatrix[0]"),
twnpo)
dm_node_scl = node.createDecomposeMatrixNode(self.root.worldMatrix)
if self.settings["keepLength"]:
arclen_node = pm.arclen(self.slv_crv, ch=True)
alAttr = pm.getAttr(arclen_node + ".arcLength")
pm.addAttr(self.slv_crv, ln="length_ratio", k=True, w=True)
node.createDivNode(arclen_node.arcLength,
alAttr,
self.slv_crv.length_ratio)
div_node_scl = node.createDivNode(self.slv_crv.length_ratio,
dm_node_scl.outputScaleX)
step = 1.000 / (self.def_number - 1)
u = 0.000
for i in range(self.def_number):
mult_node = node.createMulNode(u, self.lenght_att)
cnsUpv = applyop.pathCns(self.upv_cns[i],
self.slv_upv_crv,
cnsType=False,
u=u,
tangent=False)
pm.connectAttr(mult_node.outputX, cnsUpv.uValue)
cns = applyop.pathCns(
self.div_cns[i], self.slv_crv, False, u, True)
pm.connectAttr(mult_node.outputX, cns.uValue)
# Connectiong the scale for scaling compensation
for axis, AX in zip("xyz", "XYZ"):
pm.connectAttr(dm_node_scl.attr("outputScale{}".format(AX)),
self.div_cns[i].attr("s{}".format(axis)))
if self.settings["keepLength"]:
div_node2 = node.createDivNode(u, div_node_scl.outputX)
cond_node = node.createConditionNode(div_node2.input1X,
div_node2.outputX,
4,
div_node2.input1X,
div_node2.outputX)
# pm.connectAttr(cond_node + ".outColorR",
# cnsUpv + ".uValue")
# pm.connectAttr(cond_node + ".outColorR",
# cns + ".uValue")
pm.connectAttr(cond_node + ".outColorR",
mult_node + ".input1X", f=True)
# Connect the scaling for self.Extra_tweak_npo
et_npo = self.Extra_tweak_npo[i]
pm.connectAttr(self.spin_att, et_npo + ".rz")
base_node = node.createMulNode(self.baseSize_att, 1.00000 - u, output=None)
tip_node = node.createMulNode(self.tipSize_att, u, output=None)
sum_node = node.createPlusMinusAverage1D([base_node.outputX, tip_node.outputX])
# print et_npo
pm.connectAttr(sum_node.output1D, et_npo.scaleX, f=True)
pm.connectAttr(sum_node.output1D, et_npo.scaleY, f=True)
pm.connectAttr(sum_node.output1D, et_npo.scaleZ, f=True)
cns.setAttr("worldUpType", 1)
cns.setAttr("frontAxis", 0)
cns.setAttr("upAxis", 1)
pm.connectAttr(self.upv_cns[i].attr("worldMatrix[0]"),
cns.attr("worldUpMatrix"))
u += step
for et in self.Extra_tweak_ctl:
for shp in et.getShapes():
pm.connectAttr(self.tweakVis_att, shp.attr("visibility"))
if self.settings["keepLength"]:
# add the safty distance offset
self.tweakTip_npo.attr("tx").set(self.off_dist)
# connect vis line ref
for shp in self.line_ref.getShapes():
pm.connectAttr(self.ikVis_att, shp.attr("visibility"))
for ctl in self.tweak_ctl:
for shp in ctl.getShapes():
pm.connectAttr(self.ikVis_att, shp.attr("visibility"))
for ctl in self.fk_ctl:
for shp in ctl.getShapes():
pm.connectAttr(self.fkVis_att, shp.attr("visibility"))
def rig(
eyeMesh=None,
edgeLoop="",
blinkH=20,
namePrefix="eye",
offset=0.05,
rigidLoops=2,
falloffLoops=4,
headJnt=None,
doSkin=True,
parent_node=None,
ctlName="ctl",
sideRange=False,
customCorner=False,
intCorner=None,
extCorner=None,
ctlSet=None,
defSet=None,
upperVTrack=0.02,
upperHTrack=0.01,
lowerVTrack=0.02,
lowerHTrack=0.01,
aim_controller="",
deformers_group="",
everyNVertex=1,
):
"""Create eyelid and eye rig
Args:
eyeMesh (TYPE): Description
edgeLoop (TYPE): Description
blinkH (TYPE): Description
namePrefix (TYPE): Description
offset (TYPE): Description
rigidLoops (TYPE): Description
falloffLoops (TYPE): Description
headJnt (TYPE): Description
doSkin (TYPE): Description
parent_node (None, optional): Description
ctlName (str, optional): Description
sideRange (bool, optional): Description
customCorner (bool, optional): Description
intCorner (None, optional): Description
extCorner (None, optional): Description
ctlSet (None, optional): Description
defSet (None, optional): Description
upperVTrack (None, optional): Description
upperHTrack (None, optional): Description
lowerVTrack (None, optional): Description
lowerHTrack (None, optional): Description
aim_controller (None, optional): Description
deformers_group (None, optional): Description
everyNVertex (int, optional): Will create a joint every N vertex
No Longer Returned:
TYPE: Description
"""
##########################################
# INITIAL SETUP
##########################################
up_axis = pm.upAxis(q=True, axis=True)
if up_axis == "z":
z_up = True
else:
z_up = False
# getters
edgeLoopList = get_edge_loop(edgeLoop)
eyeMesh = get_eye_mesh(eyeMesh)
# checkers
if not edgeLoopList or not eyeMesh:
return
if doSkin:
if not headJnt:
pm.displayWarning("Please set the Head Jnt or unCheck "
"Compute Topological Autoskin")
return
# Convert data
blinkH = blinkH / 100.0
# Initial Data
bboxCenter = meshNavigation.bboxCenter(eyeMesh)
extr_v = meshNavigation.getExtremeVertexFromLoop(edgeLoopList, sideRange,
z_up)
upPos = extr_v[0]
lowPos = extr_v[1]
inPos = extr_v[2]
outPos = extr_v[3]
edgeList = extr_v[4]
vertexList = extr_v[5]
# Detect the side L or R from the x value
if inPos.getPosition(space="world")[0] < 0.0:
side = "R"
inPos = extr_v[3]
outPos = extr_v[2]
normalPos = outPos
npw = normalPos.getPosition(space="world")
normalVec = npw - bboxCenter
else:
side = "L"
normalPos = outPos
npw = normalPos.getPosition(space="world")
normalVec = bboxCenter - npw
# Manual Vertex corners
if customCorner:
if intCorner:
try:
if side == "R":
inPos = pm.PyNode(extCorner)
else:
inPos = pm.PyNode(intCorner)
except pm.MayaNodeError:
pm.displayWarning("%s can not be found" % intCorner)
return
else:
pm.displayWarning("Please set the internal eyelid corner")
return
if extCorner:
try:
normalPos = pm.PyNode(extCorner)
npw = normalPos.getPosition(space="world")
if side == "R":
outPos = pm.PyNode(intCorner)
normalVec = npw - bboxCenter
else:
outPos = pm.PyNode(extCorner)
normalVec = bboxCenter - npw
except pm.MayaNodeError:
pm.displayWarning("%s can not be found" % extCorner)
return
else:
pm.displayWarning("Please set the external eyelid corner")
return
# Check if we have prefix:
if namePrefix:
namePrefix = string.removeInvalidCharacter(namePrefix)
else:
pm.displayWarning("Prefix is needed")
return
def setName(name, ind=None):
namesList = [namePrefix, side, name]
if ind is not None:
namesList[1] = side + str(ind)
name = "_".join(namesList)
return name
if pm.ls(setName("root")):
pm.displayWarning("The object %s already exist in the scene. Please "
"choose another name prefix" % setName("root"))
return
##########################################
# CREATE OBJECTS
##########################################
# Eye root
eye_root = primitive.addTransform(None, setName("root"))
eyeCrv_root = primitive.addTransform(eye_root, setName("crvs"))
# Eyelid Main crvs
try:
upEyelid_edge = meshNavigation.edgeRangeInLoopFromMid(
edgeList, upPos, inPos, outPos)
up_crv = curve.createCurveFromOrderedEdges(upEyelid_edge,
inPos,
setName("upperEyelid"),
parent=eyeCrv_root)
upCtl_crv = curve.createCurveFromOrderedEdges(upEyelid_edge,
inPos,
setName("upCtl_crv"),
parent=eyeCrv_root)
pm.rebuildCurve(upCtl_crv, s=2, rt=0, rpo=True, ch=False)
lowEyelid_edge = meshNavigation.edgeRangeInLoopFromMid(
edgeList, lowPos, inPos, outPos)
low_crv = curve.createCurveFromOrderedEdges(lowEyelid_edge,
inPos,
setName("lowerEyelid"),
parent=eyeCrv_root)
lowCtl_crv = curve.createCurveFromOrderedEdges(lowEyelid_edge,
inPos,
setName("lowCtl_crv"),
parent=eyeCrv_root)
pm.rebuildCurve(lowCtl_crv, s=2, rt=0, rpo=True, ch=False)
except UnboundLocalError:
if customCorner:
pm.displayWarning("This error is maybe caused because the custom "
"Corner vertex is not part of the edge loop")
pm.displayError(traceback.format_exc())
return
# blendshape curves. All crv have 30 point to allow blendshape connect
upDriver_crv = curve.createCurveFromCurve(up_crv,
setName("upDriver_crv"),
nbPoints=30,
parent=eyeCrv_root)
upDriver_crv.attr("lineWidth").set(5)
lowDriver_crv = curve.createCurveFromCurve(low_crv,
setName("lowDriver_crv"),
nbPoints=30,
parent=eyeCrv_root)
lowDriver_crv.attr("lineWidth").set(5)
upRest_target_crv = curve.createCurveFromCurve(
up_crv, setName("upRest_target_crv"), nbPoints=30, parent=eyeCrv_root)
lowRest_target_crv = curve.createCurveFromCurve(
low_crv,
setName("lowRest_target_crv"),
nbPoints=30,
parent=eyeCrv_root)
upProfile_target_crv = curve.createCurveFromCurve(
up_crv,
setName("upProfile_target_crv"),
nbPoints=30,
parent=eyeCrv_root,
)
lowProfile_target_crv = curve.createCurveFromCurve(
low_crv,
setName("lowProfile_target_crv"),
nbPoints=30,
parent=eyeCrv_root,
)
# mid driver
midUpDriver_crv = curve.createCurveFromCurve(up_crv,
setName("midUpDriver_crv"),
nbPoints=30,
parent=eyeCrv_root)
midLowDriver_crv = curve.createCurveFromCurve(low_crv,
setName("midLowDriver_crv"),
nbPoints=30,
parent=eyeCrv_root)
# curve that define the close point of the eyelid
closeTarget_crv = curve.createCurveFromCurve(up_crv,
setName("closeTarget_crv"),
nbPoints=30,
parent=eyeCrv_root)
eyeCrv_root.attr("visibility").set(False)
# localBBOX
localBBox = eyeMesh.getBoundingBox(invisible=True, space="world")
wRadius = abs((localBBox[0][0] - localBBox[1][0]))
dRadius = abs((localBBox[0][1] - localBBox[1][1]) / 1.7)
# Groups
if not ctlSet:
ctlSet = "rig_controllers_grp"
try:
ctlSet = pm.PyNode(ctlSet)
except pm.MayaNodeError:
pm.sets(n=ctlSet, em=True)
ctlSet = pm.PyNode(ctlSet)
if not defSet:
defSet = "rig_deformers_grp"
try:
defset = pm.PyNode(defSet)
except pm.MayaNodeError:
pm.sets(n=defSet, em=True)
defset = pm.PyNode(defSet)
# Calculate center looking at
averagePosition = (upPos.getPosition(space="world") + lowPos.getPosition(
space="world") + inPos.getPosition(space="world") +
outPos.getPosition(space="world")) / 4
if z_up:
axis = "zx"
else:
axis = "z-x"
t = transform.getTransformLookingAt(bboxCenter,
averagePosition,
normalVec,
axis=axis,
negate=False)
over_npo = primitive.addTransform(eye_root, setName("center_lookatRoot"),
t)
center_lookat = primitive.addTransform(over_npo, setName("center_lookat"),
t)
if side == "R":
over_npo.attr("rx").set(over_npo.attr("rx").get() * -1)
over_npo.attr("ry").set(over_npo.attr("ry").get() + 180)
over_npo.attr("sz").set(-1)
t = transform.getTransform(over_npo)
# Tracking
# Eye aim control
t_arrow = transform.getTransformLookingAt(
bboxCenter,
averagePosition,
upPos.getPosition(space="world"),
axis="zy",
negate=False,
)
radius = abs((localBBox[0][0] - localBBox[1][0]) / 1.7)
arrow_ctl = None
arrow_npo = None
if aim_controller:
arrow_ctl = pm.PyNode(aim_controller)
else:
arrow_npo = primitive.addTransform(eye_root, setName("aim_npo"),
t_arrow)
arrow_ctl = icon.create(
arrow_npo,
setName("aim_%s" % ctlName),
t_arrow,
icon="arrow",
w=1,
po=datatypes.Vector(0, 0, radius),
color=4,
)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=arrow_ctl)
attribute.setKeyableAttributes(arrow_ctl, params=["rx", "ry", "rz"])
attribute.addAttribute(arrow_ctl, "isCtl", "bool", keyable=False)
# tracking custom trigger
if side == "R":
tt = t_arrow
else:
tt = t
aimTrigger_root = primitive.addTransform(center_lookat,
setName("aimTrigger_root"), tt)
# For some unknown reason the right side gets scewed rotation values
mgear.core.transform.resetTransform(aimTrigger_root)
aimTrigger_lvl = primitive.addTransform(aimTrigger_root,
setName("aimTrigger_lvl"), tt)
# For some unknown reason the right side gets scewed rotation values
mgear.core.transform.resetTransform(aimTrigger_lvl)
aimTrigger_lvl.attr("tz").set(1.0)
aimTrigger_ref = primitive.addTransform(aimTrigger_lvl,
setName("aimTrigger_ref"), tt)
# For some unknown reason the right side gets scewed rotation values
mgear.core.transform.resetTransform(aimTrigger_ref)
aimTrigger_ref.attr("tz").set(0.0)
# connect trigger with arrow_ctl
pm.parentConstraint(arrow_ctl, aimTrigger_ref, mo=True)
# Blink driver controls
if z_up:
trigger_axis = "tz"
ro_up = [0, 1.57079633 * 2, 1.57079633]
ro_low = [0, 0, 1.57079633]
po = [0, offset * -1, 0]
low_pos = 2 # Z
else:
trigger_axis = "ty"
ro_up = (1.57079633, 1.57079633, 0)
ro_low = [1.57079633, 1.57079633, 1.57079633 * 2]
po = [0, 0, offset]
low_pos = 1 # Y
# upper ctl
p = upRest_target_crv.getCVs(space="world")[15]
ut = transform.setMatrixPosition(datatypes.Matrix(), p)
npo = primitive.addTransform(over_npo, setName("upBlink_npo"), ut)
up_ctl = icon.create(
npo,
setName("upBlink_ctl"),
ut,
icon="arrow",
w=2.5,
d=2.5,
ro=datatypes.Vector(ro_up[0], ro_up[1], ro_up[2]),
po=datatypes.Vector(po[0], po[1], po[2]),
color=4,
)
attribute.setKeyableAttributes(up_ctl, [trigger_axis])
pm.sets(ctlSet, add=up_ctl)
# use translation of the object to drive the blink
blink_driver = primitive.addTransform(up_ctl, setName("blink_drv"), ut)
# lowe ctl
p_low = lowRest_target_crv.getCVs(space="world")[15]
p[low_pos] = p_low[low_pos]
lt = transform.setMatrixPosition(ut, p)
npo = primitive.addTransform(over_npo, setName("lowBlink_npo"), lt)
low_ctl = icon.create(
npo,
setName("lowBlink_ctl"),
lt,
icon="arrow",
w=1.5,
d=1.5,
ro=datatypes.Vector(ro_low[0], ro_low[1], ro_low[2]),
po=datatypes.Vector(po[0], po[1], po[2]),
color=4,
)
attribute.setKeyableAttributes(low_ctl, [trigger_axis])
pm.sets(ctlSet, add=low_ctl)
# Controls lists
upControls = []
trackLvl = []
track_corner_lvl = []
corner_ctl = []
ghost_ctl = []
# upper eyelid controls
upperCtlNames = ["inCorner", "upInMid", "upMid", "upOutMid", "outCorner"]
cvs = upCtl_crv.getCVs(space="world")
if side == "R" and not sideRange:
# if side == "R":
cvs = [cv for cv in reversed(cvs)]
# offset = offset * -1
for i, cv in enumerate(cvs):
if utils.is_odd(i):
color = 14
wd = 0.3
icon_shape = "circle"
params = ["tx", "ty", "tz"]
else:
color = 4
wd = 0.6
icon_shape = "circle"
params = [
"tx",
"ty",
"tz",
"ro",
"rx",
"ry",
"rz",
"sx",
"sy",
"sz",
]
t = transform.setMatrixPosition(t, cvs[i])
npo = primitive.addTransform(center_lookat,
setName("%s_npo" % upperCtlNames[i]), t)
npoBase = npo
# track for corners and mid point level
if i in [0, 2, 4]:
# we add an extra level to input the tracking ofset values
npo = primitive.addTransform(npo,
setName("%s_trk" % upperCtlNames[i]),
t)
if i == 2:
trackLvl.append(npo)
else:
track_corner_lvl.append(npo)
if i in [1, 2, 3]:
ctl = primitive.addTransform(npo,
setName("%s_loc" % upperCtlNames[i]),
t)
# ghost controls
if i == 2:
gt = transform.setMatrixPosition(
t, transform.getPositionFromMatrix(ut))
else:
gt = t
npo_g = primitive.addTransform(
up_ctl, setName("%sCtl_npo" % upperCtlNames[i]), gt)
ctl_g = icon.create(
npo_g,
setName("%s_%s" % (upperCtlNames[i], ctlName)),
gt,
icon=icon_shape,
w=wd,
d=wd,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, offset),
color=color,
)
# define the ctl_param to recive the ctl configuration
ctl_param = ctl_g
ghost_ctl.append(ctl_g)
# connect local SRT
rigbits.connectLocalTransform([ctl_g, ctl])
else:
ctl = icon.create(
npo,
setName("%s_%s" % (upperCtlNames[i], ctlName)),
t,
icon=icon_shape,
w=wd,
d=wd,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, offset),
color=color,
)
# define the ctl_param to recive the ctl configuration
ctl_param = ctl
attribute.addAttribute(ctl_param, "isCtl", "bool", keyable=False)
attribute.add_mirror_config_channels(ctl_param)
node.add_controller_tag(ctl_param, over_npo)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=ctl_param)
attribute.setKeyableAttributes(ctl_param, params)
upControls.append(ctl)
# add corner ctls to corner ctl list for tracking
if i in [0, 4]:
corner_ctl.append(ctl)
# if side == "R":
# npoBase.attr("ry").set(180)
# npoBase.attr("sz").set(-1)
# adding parent constraints to odd controls
for i, ctl in enumerate(upControls):
if utils.is_odd(i):
cns_node = pm.parentConstraint(upControls[i - 1],
upControls[i + 1],
ctl.getParent(),
mo=True)
# Make the constraint "noFlip"
cns_node.interpType.set(0)
# adding parent constraint ghost controls
cns_node = pm.parentConstraint(ghost_ctl[1],
upControls[0],
ghost_ctl[0].getParent(),
mo=True)
cns_node.interpType.set(0)
cns_node = pm.parentConstraint(ghost_ctl[1],
upControls[-1],
ghost_ctl[2].getParent(),
mo=True)
cns_node.interpType.set(0)
# lower eyelid controls
lowControls = [upControls[0]]
lowerCtlNames = [
"inCorner",
"lowInMid",
"lowMid",
"lowOutMid",
"outCorner",
]
cvs = lowCtl_crv.getCVs(space="world")
if side == "R" and not sideRange:
cvs = [cv for cv in reversed(cvs)]
for i, cv in enumerate(cvs):
# we skip the first and last point since is already in the uper eyelid
if i in [0, 4]:
continue
if utils.is_odd(i):
color = 14
wd = 0.3
icon_shape = "circle"
params = ["tx", "ty", "tz"]
else:
color = 4
wd = 0.6
icon_shape = "circle"
params = [
"tx",
"ty",
"tz",
"ro",
"rx",
"ry",
"rz",
"sx",
"sy",
"sz",
]
t = transform.setMatrixPosition(t, cvs[i])
npo = primitive.addTransform(center_lookat,
setName("%s_npo" % lowerCtlNames[i]), t)
npoBase = npo
if i in [1, 2, 3]:
if i == 2:
# we add an extra level to input the tracking ofset values
npo = primitive.addTransform(
npo, setName("%s_trk" % lowerCtlNames[i]), t)
trackLvl.append(npo)
ctl = primitive.addTransform(npo,
setName("%s_loc" % lowerCtlNames[i]),
t)
# ghost controls
if i == 2:
gt = transform.setMatrixPosition(
t, transform.getPositionFromMatrix(lt))
else:
gt = t
# ghost controls
npo_g = primitive.addTransform(
low_ctl, setName("%sCtl_npo" % lowerCtlNames[i]), gt)
ctl_g = icon.create(
npo_g,
setName("%s_%s" % (lowerCtlNames[i], ctlName)),
gt,
icon=icon_shape,
w=wd,
d=wd,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, offset),
color=color,
)
# define the ctl_param to recive the ctl configuration
ctl_param = ctl_g
ghost_ctl.append(ctl_g)
# connect local SRT
rigbits.connectLocalTransform([ctl_g, ctl])
else:
ctl = icon.create(
npo,
setName("%s_%s" % (lowerCtlNames[i], ctlName)),
t,
icon=icon_shape,
w=wd,
d=wd,
ro=datatypes.Vector(1.57079633, 0, 0),
po=datatypes.Vector(0, 0, offset),
color=color,
)
# define the ctl_param to recive the ctl configuration
ctl_param = ctl
attribute.addAttribute(ctl_param, "isCtl", "bool", keyable=False)
attribute.add_mirror_config_channels(ctl_param)
lowControls.append(ctl)
if len(ctlName.split("_")) == 2 and ctlName.split("_")[-1] == "ghost":
pass
else:
pm.sets(ctlSet, add=ctl_param)
attribute.setKeyableAttributes(ctl_param, params)
# mirror behaviout on R side controls
# if side == "R":
# npoBase.attr("ry").set(180)
# npoBase.attr("sz").set(-1)
for lctl in reversed(lowControls[1:]):
node.add_controller_tag(lctl, over_npo)
lowControls.append(upControls[-1])
# adding parent constraints to odd controls
for i, ctl in enumerate(lowControls):
if utils.is_odd(i):
cns_node = pm.parentConstraint(
lowControls[i - 1],
lowControls[i + 1],
ctl.getParent(),
mo=True,
)
# Make the constraint "noFlip"
cns_node.interpType.set(0)
# adding parent constraint ghost controls
cns_node = pm.parentConstraint(ghost_ctl[4],
upControls[0],
ghost_ctl[3].getParent(),
mo=True)
cns_node.interpType.set(0)
cns_node = pm.parentConstraint(ghost_ctl[4],
upControls[-1],
ghost_ctl[5].getParent(),
mo=True)
cns_node.interpType.set(0)
##########################################
# OPERATORS
##########################################
# Connecting control crvs with controls
applyop.gear_curvecns_op(upCtl_crv, upControls)
applyop.gear_curvecns_op(lowCtl_crv, lowControls)
# adding wires
w1 = pm.wire(up_crv, w=upDriver_crv)[0]
w2 = pm.wire(low_crv, w=lowDriver_crv)[0]
w3 = pm.wire(upProfile_target_crv, w=upCtl_crv)[0]
w4 = pm.wire(lowProfile_target_crv, w=lowCtl_crv)[0]
if z_up:
trigger_axis = "tz"
else:
trigger_axis = "ty"
# connect blink driver
pm.pointConstraint(low_ctl, blink_driver, mo=False)
rest_val = blink_driver.attr(trigger_axis).get()
up_div_node = node.createDivNode(up_ctl.attr(trigger_axis), rest_val)
low_div_node = node.createDivNode(low_ctl.attr(trigger_axis),
rest_val * -1)
# contact driver
minus_node = node.createPlusMinusAverage1D(
[rest_val, blink_driver.attr(trigger_axis)], operation=2)
contact_div_node = node.createDivNode(minus_node.output1D, rest_val)
# wire tension
for w in [w1, w2, w3, w4]:
w.dropoffDistance[0].set(100)
# TODO: what is the best solution?
# trigger using proximity
# remap_node = pm.createNode("remapValue")
# contact_div_node.outputX >> remap_node.inputValue
# remap_node.value[0].value_Interp.set(2)
# remap_node.inputMin.set(0.995)
# reverse_node = node.createReverseNode(remap_node.outColorR)
# for w in [w1, w2]:
# reverse_node.outputX >> w.scale[0]
# trigger at starting movement for up and low
# up
remap_node = pm.createNode("remapValue")
up_ctl.attr(trigger_axis) >> remap_node.inputValue
remap_node.value[0].value_Interp.set(2)
remap_node.inputMax.set(rest_val / 8)
reverse_node = node.createReverseNode(remap_node.outColorR)
reverse_node.outputX >> w1.scale[0]
# low
remap_node = pm.createNode("remapValue")
low_ctl.attr(trigger_axis) >> remap_node.inputValue
remap_node.value[0].value_Interp.set(2)
remap_node.inputMin.set((rest_val / 8) * -1)
remap_node.outColorR >> w2.scale[0]
# mid position drivers blendshapes
bs_midUpDrive = pm.blendShape(
lowRest_target_crv,
upProfile_target_crv,
midUpDriver_crv,
n="midUpDriver_blendShape",
)
bs_midLowDrive = pm.blendShape(
upRest_target_crv,
lowProfile_target_crv,
midLowDriver_crv,
n="midlowDriver_blendShape",
)
bs_closeTarget = pm.blendShape(
midUpDriver_crv,
midLowDriver_crv,
closeTarget_crv,
n="closeTarget_blendShape",
)
pm.connectAttr(
up_div_node.outputX,
bs_midUpDrive[0].attr(lowRest_target_crv.name()),
)
pm.connectAttr(
low_div_node.outputX,
bs_midLowDrive[0].attr(upRest_target_crv.name()),
)
pm.setAttr(bs_closeTarget[0].attr(midUpDriver_crv.name()), 0.5)
pm.setAttr(bs_closeTarget[0].attr(midLowDriver_crv.name()), 0.5)
# Main crv drivers
bs_upBlink = pm.blendShape(
lowRest_target_crv,
closeTarget_crv,
upProfile_target_crv,
upDriver_crv,
n="upBlink_blendShape",
)
bs_lowBlink = pm.blendShape(
upRest_target_crv,
closeTarget_crv,
lowProfile_target_crv,
lowDriver_crv,
n="lowBlink_blendShape",
)
# blink contact connections
cond_node_up = node.createConditionNode(contact_div_node.outputX, 1, 3, 0,
up_div_node.outputX)
pm.connectAttr(
cond_node_up.outColorR,
bs_upBlink[0].attr(lowRest_target_crv.name()),
)
cond_node_low = node.createConditionNode(contact_div_node.outputX, 1, 3, 0,
low_div_node.outputX)
pm.connectAttr(
cond_node_low.outColorR,
bs_lowBlink[0].attr(upRest_target_crv.name()),
)
cond_node_close = node.createConditionNode(contact_div_node.outputX, 1, 2,
1, 0)
cond_node_close.colorIfFalseR.set(0)
pm.connectAttr(
cond_node_close.outColorR,
bs_upBlink[0].attr(closeTarget_crv.name()),
)
pm.connectAttr(
cond_node_close.outColorR,
bs_lowBlink[0].attr(closeTarget_crv.name()),
)
pm.setAttr(bs_upBlink[0].attr(upProfile_target_crv.name()), 1)
pm.setAttr(bs_lowBlink[0].attr(lowProfile_target_crv.name()), 1)
# joints root
jnt_root = primitive.addTransformFromPos(eye_root,
setName("joints"),
pos=bboxCenter)
if deformers_group:
deformers_group = pm.PyNode(deformers_group)
pm.parentConstraint(eye_root, jnt_root, mo=True)
pm.scaleConstraint(eye_root, jnt_root, mo=True)
deformers_group.addChild(jnt_root)
# head joint
if headJnt:
try:
headJnt = pm.PyNode(headJnt)
jnt_base = headJnt
except pm.MayaNodeError:
pm.displayWarning("Aborted can not find %s " % headJnt)
return
else:
# Eye root
jnt_base = jnt_root
eyeTargets_root = primitive.addTransform(eye_root, setName("targets"))
eyeCenter_jnt = rigbits.addJnt(arrow_ctl,
jnt_base,
grp=defset,
jntName=setName("center_jnt"))
# Upper Eyelid joints ##################################################
cvs = up_crv.getCVs(space="world")
upCrv_info = node.createCurveInfoNode(up_crv)
# aim constrain targets and joints
upperEyelid_aimTargets = []
upperEyelid_jnt = []
upperEyelid_jntRoot = []
if z_up:
axis = "zy"
wupVector = [0, 0, 1]
else:
axis = "-yz"
wupVector = [0, 1, 0]
for i, cv in enumerate(cvs):
if i % everyNVertex:
continue
# aim targets
trn = primitive.addTransformFromPos(eyeTargets_root,
setName("upEyelid_aimTarget", i),
pos=cv)
upperEyelid_aimTargets.append(trn)
# connecting positions with crv
pm.connectAttr(upCrv_info + ".controlPoints[%s]" % str(i),
trn.attr("translate"))
# joints
jntRoot = primitive.addJointFromPos(jnt_root,
setName("upEyelid_jnt_base", i),
pos=bboxCenter)
jntRoot.attr("radius").set(0.08)
jntRoot.attr("visibility").set(False)
upperEyelid_jntRoot.append(jntRoot)
applyop.aimCns(jntRoot,
trn,
axis=axis,
wupObject=jnt_root,
wupVector=wupVector)
jnt_ref = primitive.addJointFromPos(jntRoot,
setName("upEyelid_jnt_ref", i),
pos=cv)
jnt_ref.attr("radius").set(0.08)
jnt_ref.attr("visibility").set(False)
jnt = rigbits.addJnt(jnt_ref,
jnt_base,
grp=defset,
jntName=setName("upEyelid_jnt", i))
upperEyelid_jnt.append(jnt)
# Lower Eyelid joints ##################################################
cvs = low_crv.getCVs(space="world")
lowCrv_info = node.createCurveInfoNode(low_crv)
# aim constrain targets and joints
lowerEyelid_aimTargets = []
lowerEyelid_jnt = []
lowerEyelid_jntRoot = []
for i, cv in enumerate(cvs):
if i in [0, len(cvs) - 1]:
continue
if i % everyNVertex:
continue
# aim targets
trn = primitive.addTransformFromPos(eyeTargets_root,
setName("lowEyelid_aimTarget", i),
pos=cv)
lowerEyelid_aimTargets.append(trn)
# connecting positions with crv
pm.connectAttr(lowCrv_info + ".controlPoints[%s]" % str(i),
trn.attr("translate"))
# joints
jntRoot = primitive.addJointFromPos(jnt_root,
setName("lowEyelid_base", i),
pos=bboxCenter)
jntRoot.attr("radius").set(0.08)
jntRoot.attr("visibility").set(False)
lowerEyelid_jntRoot.append(jntRoot)
applyop.aimCns(jntRoot,
trn,
axis=axis,
wupObject=jnt_root,
wupVector=wupVector)
jnt_ref = primitive.addJointFromPos(jntRoot,
setName("lowEyelid_jnt_ref", i),
pos=cv)
jnt_ref.attr("radius").set(0.08)
jnt_ref.attr("visibility").set(False)
jnt = rigbits.addJnt(jnt_ref,
jnt_base,
grp=defset,
jntName=setName("lowEyelid_jnt", i))
lowerEyelid_jnt.append(jnt)
# Adding channels for eye tracking
upVTracking_att = attribute.addAttribute(up_ctl,
"vTracking",
"float",
upperVTrack,
minValue=0)
upHTracking_att = attribute.addAttribute(up_ctl,
"hTracking",
"float",
upperHTrack,
minValue=0)
lowVTracking_att = attribute.addAttribute(low_ctl,
"vTracking",
"float",
lowerVTrack,
minValue=0)
lowHTracking_att = attribute.addAttribute(low_ctl,
"hTracking",
"float",
lowerHTrack,
minValue=0)
# vertical tracking connect
up_mult_node = node.createMulNode(upVTracking_att,
aimTrigger_ref.attr("ty"))
low_mult_node = node.createMulNode(lowVTracking_att,
aimTrigger_ref.attr("ty"))
# remap to use the low or the up eyelid as driver contact base on
# the eyetrack trigger direction
uT_remap_node = pm.createNode("remapValue")
aimTrigger_ref.attr("ty") >> uT_remap_node.inputValue
uT_remap_node.inputMax.set(0.1)
uT_remap_node.inputMin.set(-0.1)
up_mult_node.outputX >> uT_remap_node.outputMax
low_mult_node.outputX >> uT_remap_node.outputMin
# up
u_remap_node = pm.createNode("remapValue")
contact_div_node.outputX >> u_remap_node.inputValue
u_remap_node.value[0].value_Interp.set(2)
u_remap_node.inputMin.set(0.9)
up_mult_node.outputX >> u_remap_node.outputMin
uT_remap_node.outColorR >> u_remap_node.outputMax
# low
l_remap_node = pm.createNode("remapValue")
contact_div_node.outputX >> l_remap_node.inputValue
l_remap_node.value[0].value_Interp.set(2)
l_remap_node.inputMin.set(0.9)
low_mult_node.outputX >> l_remap_node.outputMin
uT_remap_node.outColorR >> l_remap_node.outputMax
# up connect and turn down to low when contact
pm.connectAttr(u_remap_node.outColorR, trackLvl[0].attr("ty"))
pm.connectAttr(l_remap_node.outColorR, trackLvl[1].attr("ty"))
# horizontal tracking connect
mult_node = node.createMulNode(upHTracking_att, aimTrigger_ref.attr("tx"))
# Correct right side horizontal tracking
# if side == "R":
# mult_node = node.createMulNode(mult_node.attr("outputX"), -1)
pm.connectAttr(mult_node + ".outputX", trackLvl[0].attr("tx"))
mult_node = node.createMulNode(lowHTracking_att, aimTrigger_ref.attr("tx"))
# Correct right side horizontal tracking
# if side == "R":
# mult_node = node.createMulNode(mult_node.attr("outputX"), -1)
pm.connectAttr(mult_node + ".outputX", trackLvl[1].attr("tx"))
# adding channels for corner tracking
# track_corner_lvl
for i, ctl in enumerate(corner_ctl):
VTracking_att = attribute.addAttribute(ctl,
"vTracking",
"float",
0.1,
minValue=0)
if z_up:
mult_node = node.createMulNode(VTracking_att, up_ctl.tz)
mult_node2 = node.createMulNode(VTracking_att, low_ctl.tz)
plus_node = node.createPlusMinusAverage1D(
[mult_node.outputX, mult_node2.outputX])
mult_node3 = node.createMulNode(plus_node.output1D, -1)
pm.connectAttr(mult_node3.outputX, track_corner_lvl[i].attr("ty"))
else:
mult_node = node.createMulNode(VTracking_att, up_ctl.ty)
mult_node2 = node.createMulNode(VTracking_att, low_ctl.ty)
plus_node = node.createPlusMinusAverage1D(
[mult_node.outputX, mult_node2.outputX])
pm.connectAttr(plus_node.output1D, track_corner_lvl[i].attr("ty"))
###########################################
# Reparenting
###########################################
if parent_node:
try:
if isinstance(parent_node, string_types):
parent_node = pm.PyNode(parent_node)
parent_node.addChild(eye_root)
except pm.MayaNodeError:
pm.displayWarning("The eye rig can not be parent to: %s. Maybe "
"this object doesn't exist." % parent_node)
###########################################
# Auto Skinning
###########################################
if doSkin:
# eyelid vertex rows
totalLoops = rigidLoops + falloffLoops
vertexLoopList = meshNavigation.getConcentricVertexLoop(
vertexList, totalLoops)
vertexRowList = meshNavigation.getVertexRowsFromLoops(vertexLoopList)
# we set the first value 100% for the first initial loop
skinPercList = [1.0]
# we expect to have a regular grid topology
for r in range(rigidLoops):
for rr in range(2):
skinPercList.append(1.0)
increment = 1.0 / float(falloffLoops)
# we invert to smooth out from 100 to 0
inv = 1.0 - increment
for r in range(falloffLoops):
for rr in range(2):
if inv < 0.0:
inv = 0.0
skinPercList.append(inv)
inv -= increment
# this loop add an extra 0.0 indices to avoid errors
for r in range(10):
for rr in range(2):
skinPercList.append(0.0)
# base skin
geo = pm.listRelatives(edgeLoopList[0], parent=True)[0]
# Check if the object has a skinCluster
objName = pm.listRelatives(geo, parent=True)[0]
skinCluster = skin.getSkinCluster(objName)
if not skinCluster:
skinCluster = pm.skinCluster(headJnt,
geo,
tsb=True,
nw=2,
n="skinClsEyelid")
eyelidJoints = upperEyelid_jnt + lowerEyelid_jnt
pm.progressWindow(title="Auto skinning process",
progress=0,
max=len(eyelidJoints))
firstBoundary = False
for jnt in eyelidJoints:
pm.progressWindow(e=True, step=1, status="\nSkinning %s" % jnt)
skinCluster.addInfluence(jnt, weight=0)
v = meshNavigation.getClosestVertexFromTransform(geo, jnt)
for row in vertexRowList:
if v in row:
it = 0 # iterator
inc = 1 # increment
for i, rv in enumerate(row):
try:
perc = skinPercList[it]
t_val = [(jnt, perc), (headJnt, 1.0 - perc)]
pm.skinPercent(skinCluster,
rv,
transformValue=t_val)
if rv.isOnBoundary():
# we need to compare with the first boundary
# to check if the row have inverted direction
# and offset the value
if not firstBoundary:
firstBoundary = True
firstBoundaryValue = it
else:
if it < firstBoundaryValue:
it -= 1
elif it > firstBoundaryValue:
it += 1
inc = 2
except IndexError:
continue
it = it + inc
pm.progressWindow(e=True, endProgress=True)
# Eye Mesh skinning
skinCluster = skin.getSkinCluster(eyeMesh)
if not skinCluster:
skinCluster = pm.skinCluster(eyeCenter_jnt,
eyeMesh,
tsb=True,
nw=1,
n="skinClsEye")