def _inner():
if initial_delay:
greenthread.sleep(initial_delay)
try:
while self._running:
start = timeutils.utcnow()
self.f(*self.args, **self.kw)
end = timeutils.utcnow()
if not self._running:
break
delay = interval - timeutils.delta_seconds(start, end)
if delay <= 0:
LOG.warn(_LW('task run outlasted interval by %s sec') %
-delay)
greenthread.sleep(delay if delay > 0 else 0)
except LoopingCallDone as e:
self.stop()
done.send(e.retvalue)
except Exception:
LOG.exception(_LE('in fixed duration looping call'))
done.send_exception(*sys.exc_info())
return
else:
done.send(True)
def _wait_for_exit_or_signal(self, ready_callback=None):
status = None
signo = 0
LOG.debug('Full set of CONF:')
CONF.log_opt_values(LOG, std_logging.DEBUG)
try:
if ready_callback:
ready_callback()
super(ServiceLauncher, self).wait()
except SignalExit as exc:
signame = _signo_to_signame(exc.signo)
LOG.info(_LI('Caught %s, exiting'), signame)
status = exc.code
signo = exc.signo
except SystemExit as exc:
status = exc.code
finally:
self.stop()
if rpc:
try:
rpc.cleanup()
except Exception:
# We're shutting down, so it doesn't matter at this point.
LOG.exception(_LE('Exception during rpc cleanup.'))
return status, signo
def _inner():
if initial_delay:
greenthread.sleep(initial_delay)
try:
while self._running:
idle = self.f(*self.args, **self.kw)
if not self._running:
break
if periodic_interval_max is not None:
idle = min(idle, periodic_interval_max)
LOG.debug(
'Dynamic looping call sleeping for %.02f '
'seconds', idle)
greenthread.sleep(idle)
except LoopingCallDone as e:
self.stop()
done.send(e.retvalue)
except Exception:
LOG.exception(_LE('in dynamic looping call'))
done.send_exception(*sys.exc_info())
return
else:
done.send(True)
def _inner():
if initial_delay:
greenthread.sleep(initial_delay)
try:
while self._running:
start = timeutils.utcnow()
self.f(*self.args, **self.kw)
end = timeutils.utcnow()
if not self._running:
break
delay = interval - timeutils.delta_seconds(start, end)
if delay <= 0:
LOG.warn(
_LW('task run outlasted interval by %s sec') %
-delay)
greenthread.sleep(delay if delay > 0 else 0)
except LoopingCallDone as e:
self.stop()
done.send(e.retvalue)
except Exception:
LOG.exception(_LE('in fixed duration looping call'))
done.send_exception(*sys.exc_info())
return
else:
done.send(True)
def _wrap(self, *args, **kwargs):
try:
assert issubclass(
self.__class__, sqlalchemy.orm.session.Session
), ('_wrap_db_error() can only be applied to methods of '
'subclasses of sqlalchemy.orm.session.Session.')
return f(self, *args, **kwargs)
except UnicodeEncodeError:
raise exception.DBInvalidUnicodeParameter()
except sqla_exc.OperationalError as e:
_raise_if_db_connection_lost(e, self.bind)
_raise_if_deadlock_error(e, self.bind.dialect.name)
# NOTE(comstud): A lot of code is checking for OperationalError
# so let's not wrap it for now.
raise
# note(boris-42): We should catch unique constraint violation and
# wrap it by our own DBDuplicateEntry exception. Unique constraint
# violation is wrapped by IntegrityError.
except sqla_exc.IntegrityError as e:
# note(boris-42): SqlAlchemy doesn't unify errors from different
# DBs so we must do this. Also in some tables (for example
# instance_types) there are more than one unique constraint. This
# means we should get names of columns, which values violate
# unique constraint, from error message.
_raise_if_duplicate_entry_error(e, self.bind.dialect.name)
raise exception.DBError(e)
except Exception as e:
LOG.exception(_LE('DB exception wrapped.'))
raise exception.DBError(e)
def _migrate_up(self, engine, version, with_data=False):
"""migrate up to a new version of the db.
We allow for data insertion and post checks at every
migration version with special _pre_upgrade_### and
_check_### functions in the main test.
"""
# NOTE(sdague): try block is here because it's impossible to debug
# where a failed data migration happens otherwise
try:
if with_data:
data = None
pre_upgrade = getattr(self, "_pre_upgrade_%03d" % version,
None)
if pre_upgrade:
data = pre_upgrade(engine)
self.migration_api.upgrade(engine, self.REPOSITORY, version)
self.assertEqual(
version, self.migration_api.db_version(engine,
self.REPOSITORY))
if with_data:
check = getattr(self, "_check_%03d" % version, None)
if check:
check(engine, data)
except Exception:
LOG.error(
_LE("Failed to migrate to version %s on engine %s") %
(version, engine))
raise
def _migrate_up(self, engine, version, with_data=False):
"""migrate up to a new version of the db.
We allow for data insertion and post checks at every
migration version with special _pre_upgrade_### and
_check_### functions in the main test.
"""
# NOTE(sdague): try block is here because it's impossible to debug
# where a failed data migration happens otherwise
try:
if with_data:
data = None
pre_upgrade = getattr(
self, "_pre_upgrade_%03d" % version, None)
if pre_upgrade:
data = pre_upgrade(engine)
self.migration_api.upgrade(engine, self.REPOSITORY, version)
self.assertEqual(version,
self.migration_api.db_version(engine,
self.REPOSITORY))
if with_data:
check = getattr(self, "_check_%03d" % version, None)
if check:
check(engine, data)
except Exception:
LOG.error(_LE("Failed to migrate to version %s on engine %s") %
(version, engine))
raise
def inner_func(*args, **kwargs):
last_log_time = 0
last_exc_message = None
exc_count = 0
while True:
try:
return infunc(*args, **kwargs)
except Exception as exc:
this_exc_message = six.u(str(exc))
if this_exc_message == last_exc_message:
exc_count += 1
else:
exc_count = 1
# Do not log any more frequently than once a minute unless
# the exception message changes
cur_time = int(time.time())
if (cur_time - last_log_time > 60 or
this_exc_message != last_exc_message):
logging.exception(
_LE('Unexpected exception occurred %d time(s)... '
'retrying.') % exc_count)
last_log_time = cur_time
last_exc_message = this_exc_message
exc_count = 0
# This should be a very rare event. In case it isn't, do
# a sleep.
time.sleep(1)
def inner_func(*args, **kwargs):
last_log_time = 0
last_exc_message = None
exc_count = 0
while True:
try:
return infunc(*args, **kwargs)
except Exception as exc:
this_exc_message = six.u(str(exc))
if this_exc_message == last_exc_message:
exc_count += 1
else:
exc_count = 1
# Do not log any more frequently than once a minute unless
# the exception message changes
cur_time = int(time.time())
if (cur_time - last_log_time > 60
or this_exc_message != last_exc_message):
logging.exception(
_LE('Unexpected exception occurred %d time(s)... '
'retrying.') % exc_count)
last_log_time = cur_time
last_exc_message = this_exc_message
exc_count = 0
# This should be a very rare event. In case it isn't, do
# a sleep.
time.sleep(1)
def release(self):
try:
self.unlock()
self.lockfile.close()
LOG.debug('Released file lock "%s"', self.fname)
except IOError:
LOG.exception(_LE("Could not release the acquired lock `%s`"),
self.fname)
def release(self):
try:
self.unlock()
self.lockfile.close()
LOG.debug('Released file lock "%s"', self.fname)
except IOError:
LOG.exception(_LE("Could not release the acquired lock `%s`"),
self.fname)
def __exit__(self, exc_type, exc_val, exc_tb):
if exc_type is not None:
logging.error(
_LE('Original exception being dropped: %s'),
traceback.format_exception(self.type_, self.value, self.tb))
return False
if self.reraise:
six.reraise(self.type_, self.value, self.tb)
def __exit__(self, exc_type, exc_val, exc_tb):
if exc_type is not None:
logging.error(_LE('Original exception being dropped: %s'),
traceback.format_exception(self.type_,
self.value,
self.tb))
return False
if self.reraise:
six.reraise(self.type_, self.value, self.tb)
def wrapper(*args, **kwargs):
next_interval = self.retry_interval
remaining = self.max_retries
while True:
try:
return f(*args, **kwargs)
except exception.DBConnectionError as e:
if remaining == 0:
LOG.exception(_LE('DB exceeded retry limit.'))
raise exception.DBError(e)
if remaining != -1:
remaining -= 1
LOG.exception(_LE('DB connection error.'))
# NOTE(vsergeyev): We are using patched time module, so
# this effectively yields the execution
# context to another green thread.
time.sleep(next_interval)
if self.inc_retry_interval:
next_interval = min(next_interval * 2,
self.max_retry_interval)
def wrapper(*args, **kwargs):
next_interval = self.retry_interval
remaining = self.max_retries
while True:
try:
return f(*args, **kwargs)
except exception.DBConnectionError as e:
if remaining == 0:
LOG.exception(_LE('DB exceeded retry limit.'))
raise exception.DBError(e)
if remaining != -1:
remaining -= 1
LOG.exception(_LE('DB connection error.'))
# NOTE(vsergeyev): We are using patched time module, so
# this effectively yields the execution
# context to another green thread.
time.sleep(next_interval)
if self.inc_retry_interval:
next_interval = min(
next_interval * 2,
self.max_retry_interval
)
def _child_wait_for_exit_or_signal(self, launcher):
status = 0
signo = 0
# NOTE(johannes): All exceptions are caught to ensure this
# doesn't fallback into the loop spawning children. It would
# be bad for a child to spawn more children.
try:
launcher.wait()
except SignalExit as exc:
signame = _signo_to_signame(exc.signo)
LOG.info(_LI('Caught %s, exiting'), signame)
status = exc.code
signo = exc.signo
except SystemExit as exc:
status = exc.code
except BaseException:
LOG.exception(_LE('Unhandled exception'))
status = 2
finally:
launcher.stop()
return status, signo
def _inner():
if initial_delay:
greenthread.sleep(initial_delay)
try:
while self._running:
idle = self.f(*self.args, **self.kw)
if not self._running:
break
if periodic_interval_max is not None:
idle = min(idle, periodic_interval_max)
LOG.debug('Dynamic looping call sleeping for %.02f '
'seconds', idle)
greenthread.sleep(idle)
except LoopingCallDone as e:
self.stop()
done.send(e.retvalue)
except Exception:
LOG.exception(_LE('in dynamic looping call'))
done.send_exception(*sys.exc_info())
return
else:
done.send(True)