def system_init():
"""Initialize default system."""
########## PENDULUM ##########
# Define and Setup your pendulum model here
# Check Pendulum.py for more details on Pendulum class
P_params = PendulumParameters() # Instantiate pendulum parameters
P_params.L = 1.0 # To change the default length of the pendulum
P_params.m = 0.25 # To change the default mass of the pendulum
pendulum = PendulumSystem(P_params) # Instantiate Pendulum object
#### CHECK OUT Pendulum.py to ADD PERTURBATIONS TO THE MODEL #####
pylog.info('Pendulum model initialized \n {}'.format(
pendulum.parameters.showParameters()))
########## MUSCLES ##########
# Define and Setup your muscle model here
# Check MuscleSystem.py for more details on MuscleSystem class
m1_param = MuscleParameters() # Instantiate Muscle 1 parameters
m1_param.f_max = 200. # To change Muscle 1 max force
m1_param.l_opt = 0.4
m1_param.l_slack = 0.45
m2_param = MuscleParameters() # Instantiate Muscle 2 parameters
m2_param.f_max = 200. # To change Muscle 2 max force
m2_param.l_opt = 0.4
m2_param.l_slack = 0.45
m1 = Muscle('m1', m1_param) # Instantiate Muscle 1 object
m2 = Muscle('m2', m2_param) # Instantiate Muscle 2 object
# Use the MuscleSystem Class to define your muscles in the system
# Instantiate Muscle System with two muscles
muscles = MuscleSystem(m1, m2)
pylog.info('Muscle system initialized \n {} \n {}'.format(
m1.parameters.showParameters(), m2.parameters.showParameters()))
# Define Muscle Attachment points
m1_origin = np.asarray([0.0, 0.9]) # Origin of Muscle 1
m1_insertion = np.asarray([0.0, 0.15]) # Insertion of Muscle 1
m2_origin = np.asarray([0.0, 0.8]) # Origin of Muscle 2
m2_insertion = np.asarray([0.0, -0.3]) # Insertion of Muscle 2
# Attach the muscles
muscles.attach(np.asarray([m1_origin, m1_insertion]),
np.asarray([m2_origin, m2_insertion]))
########## ADD SYSTEMS ##########
# Create a system with Pendulum and Muscles using the System Class
# Check System.py for more details on System class
sys = System() # Instantiate a new system
sys.add_pendulum_system(pendulum) # Add the pendulum model to the system
sys.add_muscle_system(muscles) # Add the muscle model to the system
########## INITIALIZATION ##########
t_max = 2 # Maximum simulation time
time = np.arange(0., t_max, 0.001) # Time vector
##### Model Initial Conditions #####
x0_P = np.asarray([np.pi / 2, 0.0]) # Pendulum initial condition
# Muscle Model initial condition
l_ce_0 = sys.muscle_sys.initialize_muscle_length(np.pi / 2)
x0_M = np.asarray([0.05, l_ce_0[0], 0.05, l_ce_0[1]])
x0 = np.concatenate((x0_P, x0_M)) # System initial conditions
########## System Simulation ##########
sim = SystemSimulation(sys) # Instantiate Simulation object
# Simulate the system for given time
sim.initalize_system(x0, time) # Initialize the system state
return sim
def system_init():
""" Use this function to create a new default system. """
########## PENDULUM ##########
# Define and Setup your pendulum model here
# Check Pendulum.py for more details on Pendulum class
P_params = PendulumParameters() # Instantiate pendulum parameters
P_params.L = 1.0 # To change the default length of the pendulum
P_params.m = 0.25 # To change the default mass of the pendulum
pendulum = PendulumSystem(P_params) # Instantiate Pendulum object
#### CHECK OUT Pendulum.py to ADD PERTURBATIONS TO THE MODEL #####
pylog.info('Pendulum model initialized \n {}'.format(
pendulum.parameters.showParameters()))
########## MUSCLES ##########
# Define and Setup your muscle model here
# Check MuscleSystem.py for more details on MuscleSystem class
m1_param = MuscleParameters() # Instantiate Muscle 1 parameters
m1_param.f_max = 200. # To change Muscle 1 max force
m1_param.l_opt = 0.4
m1_param.l_slack = 0.45
m2_param = MuscleParameters() # Instantiate Muscle 2 parameters
m2_param.f_max = 200. # To change Muscle 2 max force
m2_param.l_opt = 0.4
m2_param.l_slack = 0.45
m1 = Muscle('m1', m1_param) # Instantiate Muscle 1 object
m2 = Muscle('m2', m2_param) # Instantiate Muscle 2 object
# Use the MuscleSystem Class to define your muscles in the system
# Instantiate Muscle System with two muscles
muscles = MuscleSystem(m1, m2)
pylog.info('Muscle system initialized \n {} \n {}'.format(
m1.parameters.showParameters(), m2.parameters.showParameters()))
# Define Muscle Attachment points
m1_origin = np.asarray([0.0, 0.9]) # Origin of Muscle 1
m1_insertion = np.asarray([0.0, 0.15]) # Insertion of Muscle 1
m2_origin = np.asarray([0.0, 0.8]) # Origin of Muscle 2
m2_insertion = np.asarray([0.0, -0.3]) # Insertion of Muscle 2
# Attach the muscles
muscles.attach(np.asarray([m1_origin, m1_insertion]),
np.asarray([m2_origin, m2_insertion]))
########## Network ##########
# The network consists of four neurons
N_params = NetworkParameters() # Instantiate default network parameters
N_params.D = 1 # To change a network parameter
# Similarly to change w -> N_params.w = (4x4) array
N_params.tau = [0.02, 0.02, 0.1, 0.1]
N_params.w = [[0, -5, 5, -5], [-5, 0, -5, 5], [-5, 0, 0, 0], [0, -5, 0, 0]]
N_params.b = [3.0, 3.0, -3.0, -3.0]
N_params.w = np.transpose(N_params.w)
# Create a new neural network with above parameters
neural_network = NeuralSystem(N_params)
pylog.info('Neural system initialized \n {}'.format(
N_params.showParameters()))
########## ADD SYSTEMS ##########
# Create system of Pendulum, Muscles and neural network using SystemClass
# Check System.py for more details on System class
sys = System() # Instantiate a new system
sys.add_pendulum_system(pendulum) # Add the pendulum model to the system
sys.add_muscle_system(muscles) # Add the muscle model to the system
# Add the neural network to the system
sys.add_neural_system(neural_network)
##### Time #####
t_max = 2.5 # Maximum simulation time
time = np.arange(0., t_max, 0.001) # Time vector
##### Model Initial Conditions #####
x0_P = np.asarray([np.pi / 2, 0.]) # Pendulum initial condition
# Muscle Model initial condition
l_ce_0 = sys.muscle_sys.initialize_muscle_length(np.pi / 2)
x0_M = np.asarray([0.05, l_ce_0[0], 0.05, l_ce_0[1]])
x0_N = np.asarray([-0.5, 1, 0.5, 1]) # Neural Network Initial Conditions
x0 = np.concatenate((x0_P, x0_M, x0_N)) # System initial conditions
##### System Simulation #####
# For more details on System Simulation check SystemSimulation.py
# SystemSimulation is used to initialize the system and integrate
# over time
sim = SystemSimulation(sys) # Instantiate Simulation object
sim.initalize_system(x0, time) # Initialize the system state
return sim
def exercise2():
""" Main function to run for Exercise 2.
Parameters
----------
None
Returns
-------
None
"""
'''
sim = system_init()
# Add muscle activations to the simulation
# Here you can define your muscle activation vectors
# that are time dependent
act1 = np.ones((len(sim.time), 1)) * 0.05
act2 = np.ones((len(sim.time), 1)) * 0.05
activations = np.hstack((act1, act2))
# Method to add the muscle activations to the simulation
sim.add_muscle_stimulations(activations)
#: If you would like to perturb the pedulum model then you could do
# so by
sim.sys.pendulum_sys.parameters.PERTURBATION = True
# The above line sets the state of the pendulum model to zeros between
# time interval 1.2 < t < 1.25. You can change this and the type of
# perturbation in
# pendulum_system.py::pendulum_system function
# Integrate the system for the above initialized state and time
sim.simulate()
# Obtain the states of the system after integration
# res is np.asarray [time, states]
# states vector is in the same order as x0
res = sim.results()
# In order to obtain internal states of the muscle
# you can access the results attribute in the muscle class
muscle_1_results = sim.sys.muscle_sys.muscle_1.results
muscle_2_results = sim.sys.muscle_sys.muscle_2.results
# Plotting the results
plt.figure('Pendulum')
plt.title('Pendulum Phase')
plt.plot(res[:, 1], res[:, 2])
plt.xlabel('Position [rad]')
plt.ylabel('Velocity [rad.s]')
plt.grid()
'''
###########################################################
###########################################################
###########################################################
###########################################################
###########################################################
### code for 2a
pylog.info("2a")
theta = np.arange(np.pi / 4, np.pi * 3 / 4, 0.001)
temp_a1 = 0.35
ratios = [
0.2,
0.5,
1.,
2.,
5.,
]
L2_s = []
h2_s = []
for temp_ratio in ratios:
temp_a2 = temp_a1 * temp_ratio
temp_L2 = np.sqrt(temp_a1 * temp_a1 + temp_a2 * temp_a2 +
2 * temp_a1 * temp_a2 * np.cos(theta))
temp_h2 = (temp_a1 * temp_a2 * np.sin(theta)) / temp_L2
L2_s = L2_s + [temp_L2]
h2_s = h2_s + [temp_h2]
plt.figure(
'2a. Relationship between muscle length and pendulum angular position')
plt.title(
'Relationship between muscle length and pendulum angular position')
for i in range(len(ratios)):
plt.plot(theta, L2_s[i])
plt.xlabel('Angular Position [rad]')
plt.ylabel('Muscle Length [m]')
temp_legends = [
'ratio of a2/a1 = ' + format((temp_ratio), '.2f')
for temp_ratio in ratios
]
plt.legend(temp_legends)
plt.grid()
plt.show()
plt.figure(
'2a. Relationship between moment arm and pendulum angular position')
plt.title('Relationship between moment arm and pendulum angular position')
for i in range(len(ratios)):
plt.plot(theta, h2_s[i])
plt.xlabel('Angular Position [rad]')
plt.ylabel('Moment Arm [m]')
temp_legends = [
'ratio of a2/a1 = ' + format((temp_ratio), '.2f')
for temp_ratio in ratios
]
plt.legend(temp_legends)
plt.grid()
plt.show()
###########################################################
###########################################################
###########################################################
###########################################################
###########################################################
### code for 2b
pylog.info("2b")
#initialization
P_params = PendulumParameters() # Instantiate pendulum parameters
P_params.L = 1.0 # To change the default length of the pendulum
P_params.m = 0.25 # To change the default mass of the pendulum
pendulum = PendulumSystem(P_params) # Instantiate Pendulum object
#### CHECK OUT Pendulum.py to ADD PERTURBATIONS TO THE MODEL #####
pylog.info('Pendulum model initialized \n {}'.format(
pendulum.parameters.showParameters()))
########## MUSCLES ##########
# Define and Setup your muscle model here
# Check MuscleSystem.py for more details on MuscleSystem class
m1_param = MuscleParameters() # Instantiate Muscle 1 parameters
m1_param.f_max = 200. # To change Muscle 1 max force
m1_param.l_opt = 0.4
m1_param.l_slack = 0.45
m2_param = MuscleParameters() # Instantiate Muscle 2 parameters
m2_param.f_max = 200. # To change Muscle 2 max force
m2_param.l_opt = 0.4
m2_param.l_slack = 0.45
m1 = Muscle('m1', m1_param) # Instantiate Muscle 1 object
m2 = Muscle('m2', m2_param) # Instantiate Muscle 2 object
# Use the MuscleSystem Class to define your muscles in the system
# Instantiate Muscle System with two muscles
muscles = MuscleSystem(m1, m2)
pylog.info('Muscle system initialized \n {} \n {}'.format(
m1.parameters.showParameters(), m2.parameters.showParameters()))
# Define Muscle Attachment points
m1_origin = np.asarray([0.0, 0.9]) # Origin of Muscle 1
m1_insertion = np.asarray([0.0, 0.15]) # Insertion of Muscle 1
m2_origin = np.asarray([0.0, 0.8]) # Origin of Muscle 2
m2_insertion = np.asarray([0.0, -0.3]) # Insertion of Muscle 2
# Attach the muscles
muscles.attach(np.asarray([m1_origin, m1_insertion]),
np.asarray([m2_origin, m2_insertion]))
########## ADD SYSTEMS ##########
# Create a system with Pendulum and Muscles using the System Class
# Check System.py for more details on System class
sys = System() # Instantiate a new system
sys.add_pendulum_system(pendulum) # Add the pendulum model to the system
sys.add_muscle_system(muscles) # Add the muscle model to the system
########## INITIALIZATION ##########
t_max = 2 # Maximum simulation time
time = np.arange(0., t_max, 0.001) # Time vector
##### Model Initial Conditions #####
x0_P = np.asarray([np.pi / 2, 0.0]) # Pendulum initial condition
# Muscle Model initial condition
l_ce_0 = sys.muscle_sys.initialize_muscle_length(np.pi / 2)
x0_M = np.asarray([0.05, l_ce_0[0], 0.05, l_ce_0[1]])
x0 = np.concatenate((x0_P, x0_M)) # System initial conditions
########## System Simulation ##########
sim = SystemSimulation(sys) # Instantiate Simulation object
# Simulate the system for given time
sim.initalize_system(x0, time) # Initialize the system state
omega = 1.5
sin_act_1 = np.sin(2 * np.pi * omega * time).reshape(len(time), 1)
sin_act_1[sin_act_1 < 0] = 0
#sin_act_2=np.sin(2*np.pi*omega*time+np.pi/2).reshape(len(time),1)
sin_act_2 = -np.sin(2 * np.pi * omega * time).reshape(len(time), 1)
sin_act_2[sin_act_2 < 0] = 0
activations = np.hstack((sin_act_1, sin_act_2))
plt.figure('2b. Activation wave')
plt.title('Activation wave')
plt.plot(time, sin_act_1, label='Activation 1')
plt.plot(time, sin_act_2, label='Activation 2')
plt.xlabel('Time [s]')
plt.ylabel('Activation')
plt.grid()
plt.legend()
# without pertubation
sim.add_muscle_stimulations(activations)
sim.initalize_system(x0, time)
sim.sys.pendulum_sys.parameters.PERTURBATION = False
sim.simulate()
res = sim.results()
muscle1_results = sim.sys.muscle_sys.muscle_1.results
muscle2_results = sim.sys.muscle_sys.muscle_2.results
plt.figure('2b. Limit cycle without pertubation')
plt.title('Pendulum Phase without pertubation')
plt.plot(
res[:, 1],
res[:, 2],
)
plt.xlabel('Position [rad]')
plt.ylabel('Velocity [rad/s]')
plt.grid()
plt.legend()
# with pertubation
sim.add_muscle_stimulations(activations)
sim.initalize_system(x0, time)
sim.sys.pendulum_sys.parameters.PERTURBATION = True
sim.simulate()
res = sim.results()
muscle1_results = sim.sys.muscle_sys.muscle_1.results
muscle2_results = sim.sys.muscle_sys.muscle_2.results
plt.figure('2b. Limit cycle with pertubation')
plt.title('Pendulum Phase with pertubation')
plt.plot(
res[:, 1],
res[:, 2],
)
plt.xlabel('Position [rad]')
plt.ylabel('Velocity [rad/s]')
plt.grid()
plt.legend()
###########################################################
###########################################################
###########################################################
###########################################################
###########################################################
### code for 2c
pylog.info("2c")
# different frequencies
omegas = 1.5 * np.array([0.5, 2.])
positions = []
vels = []
for temp_omega in omegas:
sin_act_1 = np.sin(2 * np.pi * temp_omega * time).reshape(len(time), 1)
sin_act_1[sin_act_1 < 0] = 0
sin_act_2 = -np.sin(2 * np.pi * temp_omega * time).reshape(
len(time), 1)
sin_act_2[sin_act_2 < 0] = 0
activations = np.hstack((sin_act_1, sin_act_2))
sim.add_muscle_stimulations(activations)
sim.initalize_system(x0, time)
sim.sys.pendulum_sys.parameters.PERTURBATION = False
sim.simulate()
res = sim.results()
muscle1_results = sim.sys.muscle_sys.muscle_1.results
muscle2_results = sim.sys.muscle_sys.muscle_2.results
positions = positions + [res[:, 1]]
vels = vels + [res[:, 2]]
plt.figure('2c.Pendulum phase plane with stimulation frequencies')
plt.title('Pendulum phase plane with stimulation frequencies')
for i in range(len(omegas)):
plt.plot(positions[i], vels[i])
plt.xlabel('Angular Position [rad]')
plt.ylabel('Velocity [rad/s]')
temp_legends = [
'ratio of frequency = ' + format((temp_omega / 1.5), '.2f')
for temp_omega in omegas
]
plt.legend(temp_legends)
plt.grid()
plt.show()
'''
# different frequencies
omegas=1.5*np.array([0.2,0.5,1.,2.,5.])
positions=[]
vels=[]
for temp_omega in omegas:
sin_act_1=np.sin(2*np.pi*temp_omega*time).reshape(len(time),1)
sin_act_1[sin_act_1<0]=0
sin_act_2=np.sin(2*np.pi*temp_omega*(np.pi/6+time)).reshape(len(time),1)
sin_act_2[sin_act_2<0]=0
activations = np.hstack((sin_act_1,sin_act_2))
sim.add_muscle_stimulations(activations)
sim.initalize_system(x0, time)
sim.sys.pendulum_sys.parameters.PERTURBATION = False
sim.simulate()
res = sim.results()
muscle1_results = sim.sys.muscle_sys.muscle_1.results
muscle2_results = sim.sys.muscle_sys.muscle_2.results
positions=positions+[res[:, 1]]
vels=vels+[res[:,2]]
plt.figure('2c.Pendulum phase plane with stimulation frequencies')
plt.title('Pendulum phase plane with stimulation frequencies')
for i in range(len(ratios)):
plt.plot(positions[i], vels[i])
plt.xlabel('Angular Position [rad]')
plt.ylabel('Muscle Length [m]')
temp_legends=['ratio of frequency = '+ format((temp_omega/1.5),'.2f') for temp_omega in omegas]
plt.legend(temp_legends)
plt.grid()
plt.show()
'''
# To animate the model, use the SystemAnimation class
# Pass the res(states) and systems you wish to animate
simulation = SystemAnimation(res, sim.sys.pendulum_sys, sim.sys.muscle_sys)
if not DEFAULT["save_figures"]:
# To start the animation
simulation.animate()
plt.show()
else:
figures = plt.get_figlabels()
pylog.debug("Saving figures:\n{}".format(figures))
for fig in figures:
plt.figure(fig)
save_figure(fig)
plt.close(fig)
def exercise3():
""" Main function to run for Exercise 3.
Parameters
----------
None
Returns
-------
None
"""
'''
# Create system
sim = system_init()
# Add external inputs to neural network
sim.add_external_inputs_to_network(np.ones((len(sim.time), 4)))
# Integrate the system for the above initialized state and time
sim.simulate()
# Obtain the states of the system after integration
# res is np.asarray [time, states]
# states vector is in the same order as x0
res = sim.results()
# Obtain the states of the system after integration
# res is np.asarray [time, states]
# states vector is in the same order as x0
res = sim.results()
# In order to obtain internal states of the muscle
# you can access the results attribute in the muscle class
muscle_1_results = sim.sys.muscle_sys.muscle_1.results
muscle_2_results = sim.sys.muscle_sys.muscle_2.results
# Plotting the results
plt.figure('Pendulum')
plt.title('Pendulum Phase')
plt.plot(res[:, 1], res[:, 2])
plt.xlabel('Position [rad]')
plt.ylabel('Velocity [rad.s]')
plt.grid()
'''
######################################################
# initialization
########## PENDULUM ##########
P_params = PendulumParameters()
P_params.L = 1.0
P_params.m = 0.25
pendulum = PendulumSystem(P_params)
pylog.info('Pendulum model initialized \n {}'.format(
pendulum.parameters.showParameters()))
########## MUSCLES ##########
m1_param = MuscleParameters()
m1_param.f_max = 200.
m1_param.l_opt = 0.4
m1_param.l_slack = 0.45
m2_param = MuscleParameters()
m2_param.f_max = 200.
m2_param.l_opt = 0.4
m2_param.l_slack = 0.45
m1 = Muscle('m1', m1_param)
m2 = Muscle('m2', m2_param)
muscles = MuscleSystem(m1, m2)
pylog.info('Muscle system initialized \n {} \n {}'.format(
m1.parameters.showParameters(), m2.parameters.showParameters()))
######## Define Muscle Attachment points
m1_origin = np.asarray([0.0, 0.9])
m1_insertion = np.asarray([0.0, 0.15])
m2_origin = np.asarray([0.0, 0.8])
m2_insertion = np.asarray([0.0, -0.3])
muscles.attach(np.asarray([m1_origin, m1_insertion]),
np.asarray([m2_origin, m2_insertion]))
##### Time #####
t_max = 2.5
time = np.arange(0., t_max, 0.001)
###########################################################
###########################################################
###########################################################
###########################################################
###########################################################
### code for 3a
pylog.info("3a")
d = 1.
tau = np.array([0.02, 0.02, 0.1, 0.1])
b = np.array([3., 3., -3., -3.])
w = np.zeros((4, 4))
w[0, 1] = w[0, 3] = w[1, 0] = w[1, 2] = -5
w[0, 2] = w[1, 3] = 5
w[2, 0] = w[3, 1] = -5
w = w.T
N_params = NetworkParameters()
N_params.D = d
N_params.tau = tau
N_params.b = b
N_params.w = w
neural_network = NeuralSystem(N_params)
sys = System()
sys.add_pendulum_system(pendulum)
sys.add_muscle_system(muscles)
sys.add_neural_system(neural_network)
x0_P = np.asarray([np.pi / 2, 0.])
l_ce_0 = sys.muscle_sys.initialize_muscle_length(np.pi / 2)
x0_M = np.asarray([0.05, l_ce_0[0], 0.05, l_ce_0[1]])
x0_N = np.asarray([-0.5, 1, 0.5, 1])
x0 = np.concatenate((x0_P, x0_M, x0_N))
sim = SystemSimulation(sys)
sim.initalize_system(x0, time)
sim.simulate()
res = sim.results()
positions = res[:, 1]
vels = res[:, 2]
plt.figure('3a. Activation with time ')
plt.title('Activation with time')
plt.plot(res[:, 0], res[:, 3], label="Activation 1")
plt.plot(res[:, 0], res[:, 5], label="Activation 2")
plt.xlabel('Time [s]')
plt.ylabel('Activation')
plt.legend()
plt.grid()
plt.show()
# Plotting the results
plt.figure('3a. Pendulum state with time')
plt.title('Pendulum state with time')
plt.plot(res[:, 0], positions)
plt.xlabel('Time [s]')
plt.ylabel('Position [rad]')
plt.grid()
plt.show()
# Plotting the results
plt.figure('3a. Pendulum phase plot')
plt.title('Pendulum phase plot')
plt.plot(positions, vels)
plt.xlabel('Position [rad]')
plt.ylabel('Velocity [rad/s]')
plt.grid()
plt.show()
###########################################################
###########################################################
###########################################################
###########################################################
###########################################################
### code for 3b
pylog.info("3b")
all_positions = []
all_vels = []
all_time = []
all_act_1 = []
all_act_2 = []
external_drives = np.array([0, 0.2, 0.5, 1., 2., 5.])
for temp_drive in external_drives:
sim = SystemSimulation(sys)
sim.initalize_system(x0, time)
sim.add_external_inputs_to_network(
np.ones((len(sim.time), 4)) * temp_drive)
sim.simulate()
res = sim.results()
all_time = all_time + [res[:, 0]]
all_positions = all_positions + [res[:, 1]]
all_vels = all_vels + [res[:, 2]]
all_act_1 = all_act_1 + [res[:, 3]]
all_act_2 = all_act_2 + [res[:, 5]]
plt.figure('3a. Activation with time by different external drives')
plt.title('Activation with time by different external drives')
for i in range(len(external_drives)):
plt.plot(all_time[i], all_act_1[i])
plt.plot(all_time[i], all_act_2[i])
plt.xlabel('Time [s]')
plt.ylabel('Activation')
temp_legends = [
'external drive: ' + format((temp_drive), '.2f')
for temp_drive in external_drives
]
plt.legend(temp_legends)
plt.grid()
plt.show()
plt.figure('3b. Pendulum state with time by different external drives')
plt.title('Pendulum state with time by different external drives')
for i in range(len(external_drives)):
plt.plot(all_time[i], all_positions[i])
plt.xlabel('Time [s]')
plt.ylabel('Position [rad]')
temp_legends = [
'external drive: ' + format((temp_drive), '.2f')
for temp_drive in external_drives
]
plt.legend(temp_legends)
plt.grid()
plt.show()
plt.figure('3a. Pendulum phase plot by different external drives')
plt.title('Pendulum phase plot by different external drives')
for i in range(len(external_drives)):
plt.plot(all_positions[i], all_vels[i])
plt.xlabel('Position [rad]')
plt.ylabel('Velocity [rad/s]')
temp_legends = [
'external drive: ' + format((temp_drive), '.2f')
for temp_drive in external_drives
]
plt.legend(temp_legends)
plt.grid()
plt.show()
# To animate the model, use the SystemAnimation class
# Pass the res(states) and systems you wish to animate
simulation = SystemAnimation(res, sim.sys.pendulum_sys, sim.sys.muscle_sys,
sim.sys.neural_sys)
if DEFAULT["save_figures"] is False:
# To start the animation
simulation.animate()
plt.show()
else:
figures = plt.get_figlabels()
pylog.debug("Saving figures:\n{}".format(figures))
for fig in figures:
plt.figure(fig)
save_figure(fig)
plt.close(fig)