class TemperatureSensor(Sensor):
def __init__(self,
pin,
name='TemperatureHumiditySensor',
key=None,
connection=default_connection,
redis_conn=None):
super().__init__(pin,
name=name,
key=key,
connection=connection,
redis_conn=redis_conn)
return
def init_sensor(self):
self.sensors = DallasTemperature(self.pin, connection=self.connection)
self.sensor_bus = self.sensors.getDeviceCount()
# read data using pin specified pin
Logger.log(LOG_LEVEL["debug"], "There are", self.sensor_bus,
"devices connected on pin ", self.sensors.pin)
self.addresses = []
for i in range(self.sensor_bus):
self.addresses.append(self.sensors.getAddress(i))
Logger.log(LOG_LEVEL["debug"], "Their addresses", self.addresses)
#I guess this is something with bit rates? TODO: Look this up
self.sensors.setResolution(10)
#sensor = id of sensor you want in addresses[]
def read(self):
#temp = self.sensors.getTempF(sensor)
#self.r.set('temp_'+str(sensor), temp)
#return temp
return self.readAll()
def readAll(self):
self.sensors.requestTemperatures()
temps = {}
for i in range(self.sensor_bus):
temp = self.sensors.getTempC(i)
temps['temp_' + str(i)] = temp
#self.r.set(self.key+'_'+str(i), temp)
#print("Device %d (%s) " % (i, self.addresses[i]))
#print("Let's convert it in Fahrenheit degrees: %0.2f" % DallasTemperature.toFahrenheit(temp))
self.r.set(self.key, temps)
return temps
from nanpy import DallasTemperature, SerialManager
device = '/dev/cu.usbmodem1411'
connection = SerialManager(device=device)
connection.open()
sensors = DallasTemperature(connection=connection, pin=2)
n_sensors = sensors.getDeviceCount()
print("There are %d devices connected on pin %d" % (n_sensors, sensors.pin))
addresses = []
for i in range(n_sensors):
addresses.append(sensors.getAddress(i))
sensors.setResolution(12)
while True:
sensors.requestTemperatures()
for i in range(n_sensors):
temp = sensors.getTempC(i)
print("Device %d (%s) temperature, in Celsius degrees is %0.2f" % (i, addresses[i], temp))
print("Let's convert it in Fahrenheit degrees: %0.2f" % DallasTemperature.toFahrenheit(temp))
print("\n")
device = settings.get('Arduino', 'SERIAL_PORT')
pin_sound = settings.getint('Arduino', 'PIN_SOUND')
pin_temp = settings.getint('Arduino', 'PIN_TEMPERATURE')
app_id = settings.get('Instapush', 'INSTAPUSH_APP_ID')
app_secret = settings.get('Instapush', 'INSTAPUSH_APP_SECRET')
event_id = settings.get('Instapush', 'INSTAPUSH_EVENT_NAME')
threshold = settings.getfloat('Fridge', 'THRESHOLD')
notify_every_x_seconds = settings.getfloat('Fridge', 'NOTIFY_EVERY_X_SECONDS')
write_log_every_x_measurements = 50
# Startup arduino connection
connection = SerialManager(device=device)
connection.open()
arduino = ArduinoApi(connection=connection)
temperature_sensors = DallasTemperature(connection=connection, pin=pin_temp)
temperature_sensors.setResolution(12)
# Mute sound by default
arduino.pinMode(pin_sound, arduino.OUTPUT)
arduino.digitalWrite(pin_sound, 0)
# Initial values
last_alert = time.time()
threshold_reached = False
write_log_counter = 0
while True:
temperature_sensors.requestTemperatures()
temp = temperature_sensors.getTempC(
0) # Fetches the temperature on the first DS18B20 found on the pin.
#!/usr/bin/env python
# Author: Andrea Stagi <*****@*****.**>
# Description: just a test for DallasTemperature
# Dependencies: None
from nanpy import DallasTemperature
sensors = DallasTemperature(5)
print("There are %d devices connected on pin %d" % (sensors.getDeviceCount(), sensors.pin))
addr = sensors.getAddress(0)
sensors.setResolution(9)
while True:
sensors.requestTemperatures(0)
temp = sensors.getTempC(addr)
print("The temperature, in Celsius degrees is %0.2f" % temp)
print("Let's convert it in Fahrenheit degrees: %0.2f" % DallasTemperature.toFahrenheit(temp))
from nanpy import DallasTemperature, SerialManager
device = '/dev/cu.usbmodem1411'
connection = SerialManager(device=device)
connection.open()
sensors = DallasTemperature(connection=connection, pin=2)
n_sensors = sensors.getDeviceCount()
print("There are %d devices connected on pin %d" % (n_sensors, sensors.pin))
addresses = []
for i in range(n_sensors):
addresses.append(sensors.getAddress(i))
sensors.setResolution(12)
while True:
sensors.requestTemperatures()
for i in range(n_sensors):
temp = sensors.getTempC(i)
print("Device %d (%s) temperature, in Celsius degrees is %0.2f" %
(i, addresses[i], temp))
print("Let's convert it in Fahrenheit degrees: %0.2f" %
DallasTemperature.toFahrenheit(temp))
print("\n")
device = settings.get('Arduino', 'SERIAL_PORT')
pin_sound = settings.getint('Arduino', 'PIN_SOUND')
pin_temp = settings.getint('Arduino', 'PIN_TEMPERATURE')
app_id = settings.get('Instapush', 'INSTAPUSH_APP_ID')
app_secret = settings.get('Instapush', 'INSTAPUSH_APP_SECRET')
event_id = settings.get('Instapush', 'INSTAPUSH_EVENT_NAME')
threshold = settings.getfloat('Fridge', 'THRESHOLD')
notify_every_x_seconds = settings.getfloat('Fridge', 'NOTIFY_EVERY_X_SECONDS')
write_log_every_x_measurements = 50
# Startup arduino connection
connection = SerialManager(device=device)
connection.open()
arduino = ArduinoApi(connection=connection)
temperature_sensors = DallasTemperature(connection=connection, pin=pin_temp)
temperature_sensors.setResolution(12)
# Mute sound by default
arduino.pinMode(pin_sound, arduino.OUTPUT)
arduino.digitalWrite(pin_sound, 0)
# Initial values
last_alert = time.time()
threshold_reached = False
write_log_counter = 0
while True:
temperature_sensors.requestTemperatures()
temp = temperature_sensors.getTempC(0) # Fetches the temperature on the first DS18B20 found on the pin.
# Author: Andrea Stagi <*****@*****.**>
# Description: just a test for DallasTemperature
# Dependencies: None
from nanpy import (DallasTemperature, SerialManager)
import time
connection = SerialManager(device=str(input('Enter Device Serial Port: ')))
sensors = DallasTemperature(2, connection=connection)
n_sensors = sensors.getDeviceCount()
print("There are %d devices connected on pin %d" % (n_sensors, sensors.pin))
addresses = []
for i in range(n_sensors):
addresses.append(sensors.getAddress(i))
sensors.setResolution(10)
while True:
sensors.requestTemperatures()
for i in range(n_sensors):
temp = sensors.getTempC(i)
print("Device %d (%s) temperature, in Celsius degrees is %0.2f" %
(i, addresses[i], temp))
print("Let's convert it in Fahrenheit degrees: %0.2f" %
DallasTemperature.toFahrenheit(temp))
print("\n")
time.sleep(2)