def restore_interfaces_linux(self):
"""
Restore Linux interfaces.
"""
for port in self.ports_info:
pci_bus = port['pci']
pci_id = port['type']
# get device driver
driver = settings.get_nic_driver(pci_id)
if driver is not None:
# unbind device driver
addr_array = pci_bus.split(':')
domain_id = addr_array[0]
bus_id = addr_array[1]
devfun_id = addr_array[2]
port = GetNicObj(self, domain_id, bus_id, devfun_id)
self.send_expect(
'echo %s > /sys/bus/pci/devices/%s\:%s\:%s/driver/unbind' %
(pci_bus, domain_id, bus_id, devfun_id), '# ')
# bind to linux kernel driver
self.send_expect('modprobe %s' % driver, '# ')
self.send_expect(
'echo %s > /sys/bus/pci/drivers/%s/bind' %
(pci_bus, driver), '# ')
itf = port.get_interface_name()
self.send_expect("ifconfig %s up" % itf, "# ")
else:
self.logger.info("NOT FOUND DRIVER FOR PORT (%s|%s)!!!" %
(pci_bus, pci_id))
def restore_interfaces(self):
"""
Restore Linux interfaces.
"""
if self.skip_setup:
return
self.send_expect("modprobe igb", "# ", 20)
self.send_expect("modprobe ixgbe", "# ", 20)
self.send_expect("modprobe e1000e", "# ", 20)
self.send_expect("modprobe e1000", "# ", 20)
try:
for (pci_bus, pci_id) in self.pci_devices_info:
addr_array = pci_bus.split(':')
port = GetNicObj(self, addr_array[0], addr_array[1],
addr_array[2])
itf = port.get_interface_name()
self.enable_ipv6(itf)
self.send_expect("ifconfig %s up" % itf, "# ")
if port.get_interface2_name():
itf = port.get_interface2_name()
self.enable_ipv6(itf)
self.send_expect("ifconfig %s up" % itf, "# ")
except Exception as e:
self.logger.error(" !!! Restore ITF: " + e.message)
sleep(2)
def scan_ports_uncached(self):
"""
Return tester port pci/mac/interface information.
"""
self.ports_info = []
for (pci_bus, pci_id) in self.pci_devices_info:
# ignore unknown card types
if pci_id not in NICS.values():
self.logger.info("Tester: [%s %s] %s" % (pci_bus, pci_id,
"unknow_nic"))
continue
addr_array = pci_bus.split(':')
domain_id = addr_array[0]
bus_id = addr_array[1]
devfun_id = addr_array[2]
port = GetNicObj(self, domain_id, bus_id, devfun_id)
intf = port.get_interface_name()
if "No such file" in intf:
self.logger.info("Tester: [%s %s] %s" % (pci_bus, pci_id,
"unknow_interface"))
continue
self.logger.info("Tester: [%s %s] %s" % (pci_bus, pci_id, intf))
macaddr = port.get_mac_addr()
ipv6 = port.get_ipv6_addr()
ipv4 = port.get_ipv4_addr()
# store the port info to port mapping
self.ports_info.append({'port': port,
'pci': pci_bus,
'type': pci_id,
'intf': intf,
'mac': macaddr,
'ipv4': ipv4,
'ipv6': ipv6})
# return if port is not connect x3
if not port.get_interface2_name():
continue
intf = port.get_interface2_name()
self.logger.info("Tester: [%s %s] %s" % (pci_bus, pci_id, intf))
macaddr = port.get_intf2_mac_addr()
ipv6 = port.get_ipv6_addr()
# store the port info to port mapping
self.ports_info.append({'port': port,
'pci': pci_bus,
'type': pci_id,
'intf': intf,
'mac': macaddr,
'ipv6': ipv6})
def scan_ports_uncached_linux(self):
"""
Scan Linux ports and collect port's pci id, mac adress, ipv6 address.
"""
self.ports_info = []
skipped = RED('Skipped: Unknown/not selected')
unknow_interface = RED('Skipped: unknow_interface')
for (pci_bus, pci_id) in self.pci_devices_info:
if self.check_ports_available(pci_bus, pci_id) is False:
self.logger.info("DUT: [%s %s] %s" %
(pci_bus, pci_id, skipped))
continue
addr_array = pci_bus.split(':')
domain_id = addr_array[0]
bus_id = addr_array[1]
devfun_id = addr_array[2]
port = GetNicObj(self, domain_id, bus_id, devfun_id)
intf = port.get_interface_name()
if "No such file" in intf:
self.logger.info("DUT: [%s] %s" % (pci_bus, unknow_interface))
continue
macaddr = port.get_mac_addr()
if "No such file" in intf:
self.logger.info("DUT: [%s] %s" % (pci_bus, unknow_interface))
continue
numa = port.socket
# store the port info to port mapping
self.ports_info.append({
'port': port,
'pci': pci_bus,
'type': pci_id,
'numa': numa,
'intf': intf,
'mac': macaddr
})
if not port.get_interface2_name():
continue
intf = port.get_interface2_name()
macaddr = port.get_intf2_mac_addr()
numa = port.socket
# store the port info to port mapping
self.ports_info.append({
'port': port,
'pci': pci_bus,
'type': pci_id,
'numa': numa,
'intf': intf,
'mac': macaddr
})
def set_promisc(self):
try:
for (pci_bus, pci_id) in self.pci_devices_info:
addr_array = pci_bus.split(':')
port = GetNicObj(self, addr_array[0], addr_array[1], addr_array[2])
itf = port.get_interface_name()
self.enable_promisc(itf)
if port.get_interface2_name():
itf = port.get_interface2_name()
self.enable_promisc(itf)
except Exception as e:
pass
def scan_ports_uncached_freebsd(self):
"""
Scan Freebsd ports and collect port's pci id, mac adress, ipv6 address.
"""
self.ports_info = []
skipped = RED('Skipped: Unknown/not selected')
for (pci_bus, pci_id) in self.pci_devices_info:
if not settings.accepted_nic(pci_id):
self.logger.info("DUT: [%s %s] %s" %
(pci_bus, pci_id, skipped))
continue
addr_array = pci_bus.split(':')
domain_id = addr_array[0]
bus_id = addr_array[1]
devfun_id = addr_array[2]
port = GetNicObj(self, domain_id, bus_id, devfun_id)
intf = port.get_interface_name()
macaddr = port.get_mac_addr()
ipv6 = port.get_ipv6_addr()
if ipv6 is None:
ipv6 = "Not available"
self.logger.warning("NUMA not available on FreeBSD")
self.logger.info("DUT: [%s %s] %s %s" %
(pci_bus, pci_id, intf, ipv6))
# convert bsd format to linux format
pci_split = pci_bus.split(':')
pci_bus_id = hex(int(pci_split[0]))[2:]
if len(pci_split[1]) == 1:
pci_dev_str = "0" + pci_split[1]
else:
pci_dev_str = pci_split[1]
pci_str = "%s:%s.%s" % (pci_bus_id, pci_dev_str, pci_split[2])
# store the port info to port mapping
self.ports_info.append({
'port': port,
'pci': pci_str,
'type': pci_id,
'intf': intf,
'mac': macaddr,
'ipv6': ipv6,
'numa': -1
})
def get_ports(self):
"""
Get tester's NICs information.
"""
ethname = []
drivername = []
driver = []
nic = []
for key in DRIVERS:
nic = key
driver = DRIVERS[key]
for (pci_bus, pci_id) in self.pci_devices_info:
addr_array = pci_bus.split(':')
port = GetNicObj(self, addr_array[0], addr_array[1], addr_array[2])
eth = port.get_interface_name()
self.enable_ipv6(eth)
if len(eth) >= 12:
status1 = eth.split()
self.enable_ipv6(status1[0])
self.enable_ipv6(status1[1])
out1 = self.send_expect("ethtool -i %s" % status1[0], "# ")
out2 = self.send_expect("ethtool -i %s" % status1[1], "# ")
status2 = re.findall(r"driver:\s+(.*)", out1)
status3 = re.findall(r"driver:\s+(.*)", out2)
if status2:
drivername.append(status2[0])
ethname.append(status1[0])
if status3:
drivername.append(status3[0])
ethname.append(status1[1])
if not status2:
self.logger.error("ERROR: unexpected output")
if not status3:
self.logger.error("ERROR: unexpected output")
else:
out = self.send_expect("ethtool -i %s" % eth, "# ")
status = re.findall(r"driver:\s+(.*)", out)
if status:
drivername.append(status[0])
ethname.append(eth)
if not status:
self.logger.error("ERROR: unexpected output")
return ethname, drivername
def scan_ports_cached(self):
if self.ports_info is None:
return
for port_info in self.ports_info:
if port_info['type'] == 'ixia':
continue
addr_array = port_info['pci'].split(':')
domain_id = addr_array[0]
bus_id = addr_array[1]
devfun_id = addr_array[2]
port = GetNicObj(self, domain_id, bus_id, devfun_id)
intf = port.get_interface_name()
self.logger.info("Tester cached: [000:%s %s] %s" %
(port_info['pci'], port_info['type'], intf))
port_info['port'] = port
def restore_interfaces_domu(self):
"""
Restore Linux interfaces.
"""
for port in self.ports_info:
pci_bus = port['pci']
pci_id = port['type']
driver = settings.get_nic_driver(pci_id)
if driver is not None:
addr_array = pci_bus.split(':')
domain_id = addr_array[0]
bus_id = addr_array[1]
devfun_id = addr_array[2]
port = GetNicObj(self, domain_id, bus_id, devfun_id)
itf = port.get_interface_name()
self.send_expect("ifconfig %s up" % itf, "# ")
time.sleep(30)
print self.send_expect("ip link ls %s" % itf, "# ")
else:
self.logger.info(
"NOT FOUND DRIVER FOR PORT (%s|%s)!!!" % (pci_bus, pci_id))
def scan_ports_uncached_linux(self):
"""
Scan Linux ports and collect port's pci id, mac address, ipv6 address.
"""
self.ports_info = []
skipped = RED('Skipped: Unknown/not selected')
unknow_interface = RED('Skipped: unknow_interface')
domain_id = "0000"
bus_id = "01"
devfun_id = "00.0"
port = GetNicObj(self, domain_id, bus_id, devfun_id)
port.socket = 0 # set to 0 as numa node in ls2088 is returning -1
self.ports_info = [{
'intf': 'eth0',
'source': 'dpaa2',
'mac': 'b2:c8:30:9e:a6:0b',
'pci': 'nxp_NA',
'numa': 1,
'peer': '0001:00:00.0',
'type': 'nxp:NA',
'port': port
}, {
'intf': 'eth1',
'source': 'dpaa2',
'mac': 'b2:c8:30:9e:a6:0c',
'pci': 'nxp_NA',
'numa': 1,
'peer': '0001:01:00.0',
'type': 'nxp:NA',
'port': port
}]
for (pci_bus, pci_id) in self.pci_devices_info:
if self.check_ports_available(pci_bus, pci_id) is False:
self.logger.info("DUT: [%s %s] %s" %
(pci_bus, pci_id, skipped))
continue
addr_array = pci_bus.split(':')
domain_id = addr_array[0]
bus_id = addr_array[1]
devfun_id = addr_array[2]
port = GetNicObj(self, domain_id, bus_id, devfun_id)
intf = port.get_interface_name()
if "No such file" in intf:
self.logger.info("DUT: [%s] %s" % (pci_bus, unknow_interface))
continue
macaddr = port.get_mac_addr()
if "No such file" in intf:
self.logger.info("DUT: [%s] %s" % (pci_bus, unknow_interface))
continue
numa = port.socket
# store the port info to port mapping
self.ports_info.append({
'port': port,
'pci': pci_bus,
'type': pci_id,
'numa': numa,
'intf': intf,
'mac': macaddr
})
if not port.get_interface2_name():
continue
intf = port.get_interface2_name()
macaddr = port.get_intf2_mac_addr()
numa = port.socket
# store the port info to port mapping
self.ports_info.append({
'port': port,
'pci': pci_bus,
'type': pci_id,
'numa': numa,
'intf': intf,
'mac': macaddr
})