def domodule(self): nmm, g2m = self.nmmodule, self.g2module nmmp, g2mp = nmm.params, g2m.params setv(g2mp.Bandwidth, 0) setv(g2mp.Active, 1-getv(nmmp.Bypass)) setv(g2mp.Level, modtable[getv(nmmp.Level)][0])
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
if self.maing2module == 'Sw4-1':
# add a LevAmp and reorient inputs
for i in xrange(1, 5):
level = getv(getattr(nmmp, 'Level%d' % i))
if level == 0 or level == 127:
continue
if len(nmm.inputs[i-1].cables):
mix11a = self.add_module('Mix1-1A')
self.connect(mix11a.outputs.Out, getattr(g2m.inputs, 'In%d' % i))
setv(mix11a.params.On, 1)
setv(mix11a.params.Lev, modtable[level][0])
self.params[i] = mix11a.params.Lev
self.inputs[i-1] = mix11a.inputs.In
else:
sel = getv(nmmp.Sel)
for i in xrange(1, 5):
level = getv(getattr(nmmp, 'Level%d' % i))
lev = getattr(g2mp, 'Lev%d' % i)
setv(lev, modtable[level][0])
setv(getattr(g2mp, 'On%d' % i), sel == i-1)
self.params[i] = lev
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
pattern = (getv(nmmp.Pattern) + 64) % 128
setv(g2mp.PatternA, pattern)
bank = (getv(nmmp.Bank) + 64) % 128
setv(g2mp.PatternB, bank)
# PatternA and PatternB receive same input
if len(getattr(nmm.inputs, 'Pattern&Bank').cables):
self.connect(g2m.inputs.A, g2m.inputs.B)
lowdelta = getv(nmmp.LowDelta)
if lowdelta:
notequant = self.add_module('NoteQuant')
self.connect(g2m.outputs.Out, notequant.inputs.In)
setv(notequant.params.Range, 77)
setv(notequant.params.Notes, 1)
self.outputs[0] = notequant.outputs.Out
stepprob, add = 55, 75
setv(g2mp.StepProb, 55)
else:
stepprob, add = 127, 74
setv(g2mp.StepProb, stepprob)
levadd = self.add_module('LevAdd')
self.connect(self.outputs[0], levadd.inputs.In)
setv(levadd.params.Level, add)
self.outputs[0] = levadd.outputs.Out
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
pattern = (getv(nmmp.Pattern) + 64) % 128
setv(g2mp.PatternA, pattern)
bank = (getv(nmmp.Bank) + 64) % 128
setv(g2mp.PatternB, bank)
# PatternA and PatternB receive same input
if len(getattr(nmm.inputs, 'Pattern&Bank').cables):
self.connect(g2m.inputs.A, g2m.inputs.B)
lowdelta = getv(nmmp.LowDelta)
if lowdelta:
notequant = self.add_module('NoteQuant')
self.connect(g2m.outputs.Out, notequant.inputs.In)
setv(notequant.params.Range, 77)
setv(notequant.params.Notes, 1)
self.outputs[0] = notequant.outputs.Out
stepprob, add = 55, 75
setv(g2mp.StepProb, 55)
else:
stepprob, add = 127, 74
setv(g2mp.StepProb, stepprob)
levadd = self.add_module('LevAdd')
self.connect(self.outputs[0], levadd.inputs.In)
setv(levadd.params.Level, add)
self.outputs[0] = levadd.outputs.Out
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
if self.maing2module == 'Mix1-1A':
setv(g2mp.On, 1)
setv(g2mp.ExpLin, 2)
setv(g2mp.Lev, modtable[getv(nmmp.Level)][0])
out2 = self.add_module('2-Out')
lev = g2m.params.Lev
else:
out2 = g2m
lev = None
dest = getv(nmmp.Destination)
setv(out2.params.Destination, dest/2)
setv(out2.params.Active, 1-getv(nmmp.Mute))
inp = [out2.inputs.InL, out2.inputs.InR][dest % 2]
if self.maing2module == 'Mix1-1A':
self.connect(g2m.outputs.Out, inp)
else:
self.inputs = [inp]
self.params = [lev, out2.params.Destination, out2.params.Active]
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
setv(g2mp.Bandwidth, 0)
setv(g2mp.Active, 1 - getv(nmmp.Bypass))
setv(g2mp.Level, modtable[getv(nmmp.Level)][0])
def handleslv(conv):
global modindex
conv.nonslaves = []
conv.slaves = []
nmm, g2m = conv.nmmodule, conv.g2module
if len(nmm.outputs.Slv.cables):
# add a masterosc
master = conv.add_module('OscMaster', name='SlvOut%d' % modindex.slvout)
setv(g2m.params.Kbt, 0)
conv.kbt = master.params.Kbt
conv.connect(master.outputs.Out, g2m.inputs.Pitch)
setv(master.params.FreqCoarse, getv(g2m.params.FreqCoarse))
setv(master.params.FreqFine, getv(g2m.params.FreqFine))
setv(master.params.FreqMode, getv(g2m.params.FreqMode))
setv(master.params.PitchMod, getv(g2m.params.PitchMod))
setv(g2m.params.FreqCoarse, 64)
setv(g2m.params.FreqFine, 64)
out = handleoscmasterslv(conv, master, 44, 64, 69, 103, 42)
if out:
return out, master
else:
return g2m.inputs.Pitch, master
else:
conv.kbt = g2m.params.Kbt
return None, g2m
def handleslv(conv):
global modindex
conv.nonslaves = []
conv.slaves = []
nmm, g2m = conv.nmmodule, conv.g2module
if len(nmm.outputs.Slv.cables):
# add a masterosc
master = conv.add_module('OscMaster',
name='SlvOut%d' % modindex.slvout)
setv(g2m.params.Kbt, 0)
conv.kbt = master.params.Kbt
conv.connect(master.outputs.Out, g2m.inputs.Pitch)
setv(master.params.FreqCoarse, getv(g2m.params.FreqCoarse))
setv(master.params.FreqFine, getv(g2m.params.FreqFine))
setv(master.params.FreqMode, getv(g2m.params.FreqMode))
setv(master.params.PitchMod, getv(g2m.params.PitchMod))
setv(g2m.params.FreqCoarse, 64)
setv(g2m.params.FreqFine, 64)
out = handleoscmasterslv(conv, master, 44, 64, 69, 103, 42)
if out:
return out, master
else:
return g2m.inputs.Pitch, master
else:
conv.kbt = g2m.params.Kbt
return None, g2m
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
# handle special special parameters
setv(g2mp.Active, 1-getv(nmmp.Mute))
setv(g2mp.FreqMode, [1, 0][nmm.modes[0].value])
setv(g2mp.Shape, 0)
if getv(g2mp.Waveform) == 3:
pwmod = handlepw(self, 64, 0, -1, 7)
if pwmod:
notequant = self.add_module('NoteQuant', name='BlueRate')
self.connect(notequant.outputs.Out, pwmod)
setv(notequant.params.Range, 127)
setv(notequant.params.Notes, 0)
self.inputs[3] = notequant.inputs.In
# handle special inputs
self.outputs[1], inputmod = handleslv(self)
self.inputmod = inputmod
inp = inputmod.params
self.params[:3] = inp.FreqCoarse, inp.FreqFine, inp.Kbt
p1, p2 = handledualpitchmod(self, inputmod.inputs.PitchVar,
inputmod.params.PitchMod, 4, 5)
self.inputs[1:3] = p1, p2
self.inputs[0] = handlefm(self, g2m.inputs.FmMod, g2mp.FmAmount, fmamod)
handlekbt(self, self.inputmod.inputs.Pitch, 1) # 0=off, 1=on
def domodule(self):
global modindex
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
# handle special parameters
setv(g2mp.Active, 1 - getv(nmmp.Mute))
setv(g2mp.Kbt, 0)
setv(g2mp.FreqMode, [1, 0][nmm.modes[0].value])
# add AM if needed
if len(nmm.inputs.Am.cables):
sh = self.add_module('S&H', name='Amp In')
levmult = self.add_module('LevMult', name='Out')
self.connect(g2m.inputs.Trig, sh.inputs.Ctrl)
self.connect(g2m.outputs.Out, levmult.inputs.In)
self.connect(sh.outputs.Out, levmult.inputs.Mod)
self.inputs[1] = sh.inputs.In
self.outputs[0] = levmult.outputs.Out
# add pitchmod if needed
if len(nmm.inputs.PitchMod.cables):
adj = self.add_module('Mix2-1B',
name='PitchAdj1-%d' % modindex.pitchmod)
self.connect(adj.outputs.Out, g2m.inputs.PitchVar)
self.connect(adj.inputs.Chain, adj.inputs.In1)
self.connect(adj.inputs.In1, adj.inputs.In2)
pmod = getv(nmm.params.PitchMod)
setv(g2mp.PitchMod, modtable[pmod][0])
setv(adj.params.Inv2, 1)
setv(adj.params.Lev1, modtable[pmod][1])
setv(adj.params.Lev2, modtable[pmod][2])
self.inputs[2] = adj.inputs.Chain
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
setv(g2mp.Kbt, 0)
setv(g2mp.Active, 1-getv(nmmp.Mute))
setv(g2mp.FreqMode, [2, 3, 1][nmm.modes[0].value])
g2m.modes.Waveform.value = self.waveform
# must happen after handle mst to get Range
if getv(getattr(nmmp, '-3Oct')):
freqmode = getv(g2mp.FreqMode)
nm1freqcoarse = getv(nmmp.DetuneCoarse)
g2freqcoarse = getv(g2mp.FreqCoarse)
if freqmode == 3: # Part
offset = 8
else:
offset = 36
if g2freqcoarse - offset < 0:
constswt = self.add_module('ConstSwT', name='Offset')
setv(constswt.params.On, 1)
constswt.params.On.labels = ['Offset']
setv(constswt.params.Lev, g2freqcoarse-offset)
setv(g2mp.PitchVar, 127)
self.connect(constswt.outputs.Out, g2m.inputs.PitchVar)
else:
setv(g2mp.FreqCoarse, g2freqcoarse-offset)
self.inputs[1] = handlefm(self, g2m.inputs.PhaseMod, g2mp.PhaseMod, fmbmod)
sinepostmst(self, 0)
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
if self.maing2module == 'Sw4-1':
# add a LevAmp and reorient inputs
for i in xrange(1, 5):
level = getv(getattr(nmmp, 'Level%d' % i))
if level == 0 or level == 127:
continue
if len(nmm.inputs[i - 1].cables):
mix11a = self.add_module('Mix1-1A')
self.connect(mix11a.outputs.Out,
getattr(g2m.inputs, 'In%d' % i))
setv(mix11a.params.On, 1)
setv(mix11a.params.Lev, modtable[level][0])
self.params[i] = mix11a.params.Lev
self.inputs[i - 1] = mix11a.inputs.In
else:
sel = getv(nmmp.Sel)
for i in xrange(1, 5):
level = getv(getattr(nmmp, 'Level%d' % i))
lev = getattr(g2mp, 'Lev%d' % i)
setv(lev, modtable[level][0])
setv(getattr(g2mp, 'On%d' % i), sel == i - 1)
self.params[i] = lev
def domodule(self):
global modindex
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
# handle special parameters
setv(g2mp.Active, 1-getv(nmmp.Mute))
setv(g2mp.Kbt, 0)
setv(g2mp.FreqMode, [1, 0][nmm.modes[0].value])
# add AM if needed
if len(nmm.inputs.Am.cables):
sh = self.add_module('S&H', name='Amp In')
levmult = self.add_module('LevMult', name='Out')
self.connect(g2m.inputs.Trig, sh.inputs.Ctrl)
self.connect(g2m.outputs.Out, levmult.inputs.In)
self.connect(sh.outputs.Out, levmult.inputs.Mod)
self.inputs[1] = sh.inputs.In
self.outputs[0] = levmult.outputs.Out
# add pitchmod if needed
if len(nmm.inputs.PitchMod.cables):
adj = self.add_module('Mix2-1B', name='PitchAdj1-%d' % modindex.pitchmod)
self.connect(adj.outputs.Out, g2m.inputs.PitchVar)
self.connect(adj.inputs.Chain, adj.inputs.In1)
self.connect(adj.inputs.In1, adj.inputs.In2)
pmod = getv(nmm.params.PitchMod)
setv(g2mp.PitchMod, modtable[pmod][0])
setv(adj.params.Inv2, 1)
setv(adj.params.Lev1, modtable[pmod][1])
setv(adj.params.Lev2, modtable[pmod][2])
self.inputs[2] = adj.inputs.Chain
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
# handle special special parameters
setv(g2mp.Active, 1 - getv(nmmp.Mute))
setv(g2mp.FreqMode, [1, 0][nmm.modes[0].value])
setv(g2mp.Shape, 0)
if getv(g2mp.Waveform) == 3:
pwmod = handlepw(self, 64, 0, -1, 7)
if pwmod:
notequant = self.add_module('NoteQuant', name='BlueRate')
self.connect(notequant.outputs.Out, pwmod)
setv(notequant.params.Range, 127)
setv(notequant.params.Notes, 0)
self.inputs[3] = notequant.inputs.In
# handle special inputs
self.outputs[1], inputmod = handleslv(self)
self.inputmod = inputmod
inp = inputmod.params
self.params[:3] = inp.FreqCoarse, inp.FreqFine, inp.Kbt
p1, p2 = handledualpitchmod(self, inputmod.inputs.PitchVar,
inputmod.params.PitchMod, 4, 5)
self.inputs[1:3] = p1, p2
self.inputs[0] = handlefm(self, g2m.inputs.FmMod, g2mp.FmAmount,
fmamod)
handlekbt(self, self.inputmod.inputs.Pitch, 1) # 0=off, 1=on
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
g2mp.Sel.labels = ['In', 'SideAct']
setv(g2mp.Sel, getv(nmmp.Act))
self.params[6] = g2mp.Sel
envfollow = self.add_module('EnvFollow')
setv(envfollow.params.Attack, getv(nmmp.Attack))
setv(envfollow.params.Release, getv(nmmp.Release))
self.params[:2] = envfollow.params.Attack, envfollow.params.Release
ratio = self.add_module('ShpExp', name='Ratio/Thresh')
setv(ratio.params.Curve, 2) # x4
setv(ratio.params.Amount, getv(nmmp.Ratio))
self.params[3] = ratio.params.Amount
left = self.add_module('LevMult', name='Left')
right = self.add_module('LevMult', name='Right')
# MISSING Gate, Hold, Mon, and Bypass parameters
self.connect(g2m.inputs.In1, left.inputs.In)
self.connect(g2m.outputs.Out, envfollow.inputs.In)
self.connect(envfollow.outputs.Out, ratio.inputs.In)
self.connect(ratio.outputs.Out, left.inputs.Mod)
self.connect(left.inputs.Mod, right.inputs.Mod)
self.inputs[:] = left.inputs.In, right.inputs.In, g2m.inputs.In2
self.outputs = left.outputs.Out, right.outputs.Out
def handlelength(conv):
nmm, g2m = conv.nmmodule, conv.g2module
nmmp, g2mp = nmm.params, g2m.params
length = getv(nmmp.Length)
if getv(nmmp.Loop) == 0 and length > 15:
link = g2m.outputs.Link
setv(g2mp.Length, 16)
for l in xrange(16, length, 16):
seq = conv.add_module(g2m.type.shortnm)
if l + 16 > length:
setv(seq.params.Length, length - l)
else:
setv(seq.params.Length, 16)
setv(seq.params.Loop, 0) # Once
conv.connect(g2m.inputs.Rst, seq.inputs.Park)
conv.connect(link, seq.inputs.Rst)
conv.connect(g2m.inputs.Clk, seq.inputs.Clk)
link = seq.outputs.Link
return link
if length > 16:
clkdiv = conv.add_module('ClkDiv')
clkdiv.modes.DivMode.value = 0
setv(clkdiv.params.Divider, length)
conv.connect(clkdiv.outputs.Out, g2m.inputs.Rst)
conv.connect(clkdiv.inputs.Clk, g2m.inputs.Clk)
conv.inputs[1] = clkdiv.inputs.Rst
setv(g2mp.Loop, 0) # Once
return g2m.outputs.Link
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
setv(g2mp.Kbt, 0)
setv(g2mp.Active, 1 - getv(nmmp.Mute))
setv(g2mp.FreqMode, [2, 3, 1][nmm.modes[0].value])
g2m.modes.Waveform.value = self.waveform
# must happen after handle mst to get Range
if getv(getattr(nmmp, '-3Oct')):
freqmode = getv(g2mp.FreqMode)
nm1freqcoarse = getv(nmmp.DetuneCoarse)
g2freqcoarse = getv(g2mp.FreqCoarse)
if freqmode == 3: # Part
offset = 8
else:
offset = 36
if g2freqcoarse - offset < 0:
constswt = self.add_module('ConstSwT', name='Offset')
setv(constswt.params.On, 1)
constswt.params.On.labels = ['Offset']
setv(constswt.params.Lev, g2freqcoarse - offset)
setv(g2mp.PitchVar, 127)
self.connect(constswt.outputs.Out, g2m.inputs.PitchVar)
else:
setv(g2mp.FreqCoarse, g2freqcoarse - offset)
self.inputs[1] = handlefm(self, g2m.inputs.PhaseMod, g2mp.PhaseMod,
fmbmod)
sinepostmst(self, 0)
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
if self.maing2module == 'Mix1-1A':
setv(g2mp.On, 1)
setv(g2mp.ExpLin, 2)
setv(g2mp.Lev, modtable[getv(nmmp.Level)][0])
out2 = self.add_module('2-Out')
lev = g2m.params.Lev
else:
out2 = g2m
lev = None
dest = getv(nmmp.Destination)
setv(out2.params.Destination, dest / 2)
setv(out2.params.Active, 1 - getv(nmmp.Mute))
inp = [out2.inputs.InL, out2.inputs.InR][dest % 2]
if self.maing2module == 'Mix1-1A':
self.connect(g2m.outputs.Out, inp)
else:
self.inputs = [inp]
self.params = [lev, out2.params.Destination, out2.params.Active]
def handlelength(conv):
nmm, g2m = conv.nmmodule, conv.g2module
nmmp, g2mp = nmm.params, g2m.params
length = getv(nmmp.Length)
if getv(nmmp.Loop) == 0 and length > 15:
link = g2m.outputs.Link
setv(g2mp.Length, 16)
for l in xrange(16, length, 16):
seq = conv.add_module(g2m.type.shortnm)
if l + 16 > length:
setv(seq.params.Length, length - l)
else:
setv(seq.params.Length, 16)
setv(seq.params.Loop, 0) # Once
conv.connect(g2m.inputs.Rst, seq.inputs.Park)
conv.connect(link, seq.inputs.Rst)
conv.connect(g2m.inputs.Clk, seq.inputs.Clk)
link = seq.outputs.Link
return link
if length > 16:
clkdiv = conv.add_module('ClkDiv')
clkdiv.modes.DivMode.value = 0
setv(clkdiv.params.Divider, length)
conv.connect(clkdiv.outputs.Out, g2m.inputs.Rst)
conv.connect(clkdiv.inputs.Clk, g2m.inputs.Clk)
conv.inputs[1] = clkdiv.inputs.Rst
setv(g2mp.Loop, 0) # Once
return g2m.outputs.Link
def domodule(self): nmm, g2m = self.nmmodule, self.g2module nmmp, g2mp = nmm.params, g2m.params setv(g2mp.InputType, 0) # Pos mode = getv(nmmp.Mode) inv = getv(nmmp.Inv) setv(g2mp.OutputType, [4, 2, 0, 5, 3, 1][inv*3+mode])
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
setv(g2mp.Bits, getv(nmmp.Bits)) # becuase it's also used for QuantOff
quantoff = getv(nmmp.QuantOff)
if quantoff:
setv(g2mp.Bits, 12)
setv(g2mp.Active, 1-getv(nmmp.SamplingOff))
def handledualpitchmod(conv, modinput, modinputparam, mod1param, mod2param):
global modindex
nmm, g2m = conv.nmmodule, conv.g2module
p1 = p2 = None
mix21b = None
pmod1 = getv(nmm.params.PitchMod1)
pmod2 = getv(nmm.params.PitchMod2)
if len(nmm.inputs.PitchMod1.cables) and len(nmm.inputs.PitchMod2.cables):
setv(modinputparam, 127)
mix21b = conv.add_module('Mix2-1B',
name='PitchMod%d' % modindex.pitchmod)
conv.connect(mix21b.outputs.Out, modinput)
if pmod1 == 0 or pmod1 == 127:
setv(mix21b.params.Lev1, pmod1)
p1 = mix21b.inputs.In1
elif pmod1:
p1 = pitchadj(conv, mix21b.params.Lev1, mix21b.inputs.In1,
modtable[pmod1])
else:
p1 = mix21b.inputs.In1
if pmod2 == 0 or pmod2 == 127:
setv(mix21b.params.Lev2, pmod2)
p2 = mix21b.inputs.In2
elif pmod2:
p2 = pitchadj(conv, mix21b.params.Lev2, mix21b.inputs.In2,
modtable[pmod2])
conv.params[mod1param] = mix21b.params.Lev1
conv.params[mod2param] = mix21b.params.Lev2
elif len(nmm.inputs.PitchMod1.cables):
if pmod1 == 0 or pmod1 == 127:
setv(modinputparam, pmod1)
p1 = modinput
else:
p1 = pitchadj(conv, modinputparam, modinput, modtable[pmod1])
conv.params[mod1param] = modinputparam
elif len(nmm.inputs.PitchMod2.cables):
if pmod2 == 0 or pmod2 == 127:
setv(modinputparam, pmod2)
p2 = modinput
else:
p2 = pitchadj(conv, modinputparam, modinput, modtable[pmod2])
conv.params[mod2param] = modinputparam
return p1, p2
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
handlegate(self)
setv(g2mp.SustainMode, [3, 0, 1, 2, 3][getv(nmmp.Sustain)])
setv(g2mp.Shape, [3, 2, 1][getv(nmmp.Curve)])
# handle special parameters
updatevals(g2mp, ['Time%d' % i for i in xrange(1, 5)]+['NR'], adsrtime_map)
# if L4 is sustain, deal with it.
sustain = getv(nmmp.Sustain)
if sustain == 4:
adsr = self.add_module('EnvADSR')
setv(adsr.params.Shape, [3, 2, 1][getv(nmmp.Curve)])
setv(adsr.params.KB, getv(g2mp.KB))
setv(adsr.params.Attack, 0)
setv(adsr.params.Decay, 0)
setv(adsr.params.Sustain, 127)
setv(adsr.params.Release, getv(nmmp.Time5))
updatevals(adsr.params, ['Release'], adsrtime_map)
self.connect(g2m.inputs.Gate, adsr.inputs.Gate)
self.connect(adsr.outputs.Env, g2m.inputs.AM)
self.inputs[2] = adsr.inputs.AM
return
elif sustain == 3 and getv(nmmp.Time5) <= 16: # 16=5.3ms
pass
time = nm1adsrtime[getv(nmmp.Time4)]+nm1adsrtime[getv(nmmp.Time5)]
setv(g2mp.Time4, self.closesttime(time))
setv(g2mp.Level4, 0)
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
handlegate(self)
setv(g2mp.SustainMode, [3, 0, 1, 2, 3][getv(nmmp.Sustain)])
setv(g2mp.Shape, [3, 2, 1][getv(nmmp.Curve)])
# handle special parameters
updatevals(g2mp, ['Time%d' % i for i in xrange(1, 5)] + ['NR'],
adsrtime_map)
# if L4 is sustain, deal with it.
sustain = getv(nmmp.Sustain)
if sustain == 4:
adsr = self.add_module('EnvADSR')
setv(adsr.params.Shape, [3, 2, 1][getv(nmmp.Curve)])
setv(adsr.params.KB, getv(g2mp.KB))
setv(adsr.params.Attack, 0)
setv(adsr.params.Decay, 0)
setv(adsr.params.Sustain, 127)
setv(adsr.params.Release, getv(nmmp.Time5))
updatevals(adsr.params, ['Release'], adsrtime_map)
self.connect(g2m.inputs.Gate, adsr.inputs.Gate)
self.connect(adsr.outputs.Env, g2m.inputs.AM)
self.inputs[2] = adsr.inputs.AM
return
elif sustain == 3 and getv(nmmp.Time5) <= 16: # 16=5.3ms
pass
time = nm1adsrtime[getv(nmmp.Time4)] + nm1adsrtime[getv(nmmp.Time5)]
setv(g2mp.Time4, self.closesttime(time))
setv(g2mp.Level4, 0)
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
levamp = self.add_module('LevAmp', name='LevAmp')
setv(levamp.params.Type, 1)
setv(levamp.params.Gain, 68)
self.connect(g2m.outputs.Out, levamp.inputs.In)
self.outputs[0] = levamp.outputs.Out
# if sync connected, use OscC, otherwise use OscD
if len(nmm.inputs.Sync.cables):
osctype = 'OscC'
else:
osctype = 'OscD'
oscs = []
for i in xrange(6, 0, -1): # 6 Sine Osc
# if osc muted, don't addit
if getv(getattr(nmmp, 'Osc%dMute' % i)) == 0:
if len(getattr(nmm.inputs, 'Osc%dAm'%i).cables) == 0 and \
len(nmm.inputs.Sync.cables) == 0 and \
len(nmm.inputs.Mst.cables) == 0:
continue
osc = self.add_module(osctype, name='Osc%d' % i)
oscs.append(osc)
setv(osc.params.Kbt, 0)
setv(osc.params.FreqCoarse, getv(getattr(nmmp, 'Osc%dCoarse' % i)))
self.params[(i - 1) * 3] = osc.params.FreqCoarse
setv(osc.params.FreqFine, getv(getattr(nmmp, 'Osc%dFine' % i)))
self.params[(i - 1) * 3 + 1] = osc.params.FreqFine
setv(osc.params.FreqMode, 2)
l = getattr(g2mp, 'Lev%d' % i)
setv(l, getv(getattr(nmmp, 'Osc%dLevel' % i)))
self.params[(i - 1) * 3 + 2] = l
setv(osc.params.Active, 1 - getv(getattr(nmmp, 'Osc%dMute' % i)))
self.params[(i - 1) + 18] = osc.params.Active
if len(getattr(nmm.inputs, 'Osc%dAm' % i).cables):
mod = self.add_module('LevMult', name='Am%d' % i)
self.connect(osc.outputs.Out, mod.inputs.In)
self.connect(mod.outputs.Out, getattr(g2m.inputs, 'In%d' % i))
self.inputs[2 + i] = mod.inputs.Mod
else:
self.connect(osc.outputs.Out, getattr(g2m.inputs, 'In%d' % i))
if len(nmm.inputs.Sync.cables):
self.inputs[2] = oscs[0].inputs.Sync
if len(oscs) > 1:
for i in xrange(1, len(oscs)):
self.connect(oscs[i - 1].inputs.Sync, oscs[i].inputs.Sync)
if len(nmm.inputs.Mst.cables):
self.inputs[0] = oscs[0].inputs.Pitch
if len(oscs) > 1:
for i in xrange(1, len(oscs)):
self.connect(oscs[i - 1].inputs.Pitch,
oscs[i].inputs.Pitch)
self.oscs = oscs
sinepostmst(self, 0)
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
levamp = self.add_module('LevAmp', name='LevAmp')
setv(levamp.params.Type, 1)
setv(levamp.params.Gain, 68)
self.connect(g2m.outputs.Out, levamp.inputs.In)
self.outputs[0] = levamp.outputs.Out
# if sync connected, use OscC, otherwise use OscD
if len(nmm.inputs.Sync.cables):
osctype = 'OscC'
else:
osctype = 'OscD'
oscs = []
for i in xrange(6, 0, -1): # 6 Sine Osc
# if osc muted, don't addit
if getv(getattr(nmmp, 'Osc%dMute'%i))==0:
if len(getattr(nmm.inputs, 'Osc%dAm'%i).cables) == 0 and \
len(nmm.inputs.Sync.cables) == 0 and \
len(nmm.inputs.Mst.cables) == 0:
continue
osc = self.add_module(osctype, name='Osc%d' % i)
oscs.append(osc)
setv(osc.params.Kbt, 0)
setv(osc.params.FreqCoarse, getv(getattr(nmmp, 'Osc%dCoarse'%i)))
self.params[(i-1)*3] = osc.params.FreqCoarse
setv(osc.params.FreqFine, getv(getattr(nmmp, 'Osc%dFine'%i)))
self.params[(i-1)*3+1] = osc.params.FreqFine
setv(osc.params.FreqMode, 2)
l = getattr(g2mp, 'Lev%d' % i)
setv(l, getv(getattr(nmmp, 'Osc%dLevel'%i)))
self.params[(i-1)*3+2] = l
setv(osc.params.Active, 1-getv(getattr(nmmp, 'Osc%dMute'%i)))
self.params[(i-1)+18] = osc.params.Active
if len(getattr(nmm.inputs, 'Osc%dAm'%i).cables):
mod = self.add_module('LevMult', name='Am%d' % i)
self.connect(osc.outputs.Out, mod.inputs.In)
self.connect(mod.outputs.Out, getattr(g2m.inputs, 'In%d'%i))
self.inputs[2+i] = mod.inputs.Mod
else:
self.connect(osc.outputs.Out, getattr(g2m.inputs, 'In%d'%i))
if len(nmm.inputs.Sync.cables):
self.inputs[2] = oscs[0].inputs.Sync
if len(oscs) > 1:
for i in xrange(1, len(oscs)):
self.connect(oscs[i-1].inputs.Sync, oscs[i].inputs.Sync)
if len(nmm.inputs.Mst.cables):
self.inputs[0] = oscs[0].inputs.Pitch
if len(oscs) > 1:
for i in xrange(1, len(oscs)):
self.connect(oscs[i-1].inputs.Pitch, oscs[i].inputs.Pitch)
self.oscs = oscs
sinepostmst(self, 0)
def handledualpitchmod(conv, modinput, modinputparam, mod1param, mod2param):
global modindex
nmm, g2m = conv.nmmodule, conv.g2module
p1 = p2 = None
mix21b = None
pmod1 = getv(nmm.params.PitchMod1)
pmod2 = getv(nmm.params.PitchMod2)
if len(nmm.inputs.PitchMod1.cables) and len(nmm.inputs.PitchMod2.cables):
setv(modinputparam, 127)
mix21b = conv.add_module('Mix2-1B', name='PitchMod%d' % modindex.pitchmod)
conv.connect(mix21b.outputs.Out, modinput)
if pmod1 == 0 or pmod1 == 127:
setv(mix21b.params.Lev1, pmod1)
p1 = mix21b.inputs.In1
elif pmod1:
p1 = pitchadj(conv, mix21b.params.Lev1, mix21b.inputs.In1,
modtable[pmod1])
else:
p1 = mix21b.inputs.In1
if pmod2 == 0 or pmod2 == 127:
setv(mix21b.params.Lev2, pmod2)
p2 = mix21b.inputs.In2
elif pmod2:
p2 = pitchadj(conv, mix21b.params.Lev2, mix21b.inputs.In2,
modtable[pmod2])
conv.params[mod1param] = mix21b.params.Lev1
conv.params[mod2param] = mix21b.params.Lev2
elif len(nmm.inputs.PitchMod1.cables):
if pmod1 == 0 or pmod1 == 127:
setv(modinputparam, pmod1)
p1 = modinput
else:
p1 = pitchadj(conv, modinputparam, modinput, modtable[pmod1])
conv.params[mod1param] = modinputparam
elif len(nmm.inputs.PitchMod2.cables):
if pmod2 == 0 or pmod2 == 127:
setv(modinputparam, pmod2)
p2 = modinput
else:
p2 = pitchadj(conv, modinputparam, modinput, modtable[pmod2])
conv.params[mod2param] = modinputparam
return p1, p2
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
if self.maing2module == 'DelayDual':
setv(g2mp.Time2, 63) # 2.64mS
setv(g2mp.Time1, (getv(nmmp.Time) + 1) / 2)
setv(g2mp.Time1Mod, (getv(nmmp.Modulation) + 1) / 2)
else:
setv(g2mp.Time, (getv(nmmp.Time) + 1) / 2)
setv(g2mp.TimeMod, (getv(nmmp.Modulation) + 1) / 2)
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
if self.maing2module == 'DelayDual':
setv(g2mp.Time2, 63) # 2.64mS
setv(g2mp.Time1, (getv(nmmp.Time)+1)/2)
setv(g2mp.Time1Mod, (getv(nmmp.Modulation)+1)/2)
else:
setv(g2mp.Time, (getv(nmmp.Time)+1)/2)
setv(g2mp.TimeMod, (getv(nmmp.Modulation)+1)/2)
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
setv(g2mp.Kbt, 0)
l = getv(nmmp.LeftGain)
r = getv(nmmp.RightGain)
velsens = getv(nmmp.VelocitySensitivity)
external = 0
for paramnm in ['VelocitySensitivity', 'LeftGain', 'RightGain']:
param = getattr(nmmp, paramnm)
for checknm in ['knob', 'ctrl', 'morph']:
if getattr(param, checknm) != None:
external = 1
less8db = (abs(l-24) <= 8 and abs(r-24) <= 8)
velinp = len(nmm.inputs.Velocity.cables) != 0
setv(g2mp.L, notescale[l][1])
setv(g2mp.R, notescale[r][1])
if not external and less8db and not velinp and velsens == 0 :
return
if not less8db:
setv(g2mp.Kbt, 0)
setv(g2mp.L, notescale[l][0])
setv(g2mp.R, notescale[r][0])
levmult1 = self.add_module('LevMult', name='24db')
self.connect(g2m.outputs.Level, g2m.inputs.In)
self.connect(g2m.outputs.Level, levmult1.inputs.Mod)
self.connect(g2m.outputs.Out, levmult1.inputs.In)
out = levmult1.outputs.Out
if not velinp and velsens == 0:
self.outputs[0] = levmult1.outputs.Out
return
else:
out = g2m.outputs.Level
mix21b = self.add_module('Mix2-1B', name='Vel')
setv(mix21b.params.Inv2, 1)
setv(mix21b.params.Lev1, 88)
setv(mix21b.params.Lev2, 16)
self.connect(mix21b.inputs.Chain, mix21b.inputs.In1)
self.connect(mix21b.inputs.In1, mix21b.inputs.In2)
levmult2 = self.add_module('LevMult', name='')
xfade = self.add_module('X-Fade', name='VelSens')
setv(xfade.params.LogLin, 1) # Lin
self.connect(mix21b.outputs.Out, levmult2.inputs.Mod)
self.connect(out, levmult2.inputs.In)
self.connect(levmult2.inputs.In, xfade.inputs.In1)
self.connect(levmult2.outputs.Out, xfade.inputs.In2)
setv(xfade.params.Mix, velsens)
self.params[0] = xfade.params.Mix
self.inputs[0] = mix21b.inputs.Chain
self.outputs[0] = xfade.outputs.Out
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
shpexp = self.add_module('ShpExp')
setv(shpexp.params.Curve, 2) # x4
setv(shpexp.params.Amount, 127)
constswt = self.add_module('ConstSwT')
setv(constswt.params.On, 1)
setv(constswt.params.Lev, getv(nmmp.Gain))
setv(constswt.params.BipUni, getv(nmmp.Unipolar))
self.connect(shpexp.outputs.Out, g2m.inputs.Mod)
self.connect(constswt.outputs.Out, shpexp.inputs.In)
self.params = constswt.params.Lev, constswt.params.BipUni
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
waveform = getv(nmmp.Waveform)
setv(g2mp.Waveform, [0, 1, 2, 2, 3][waveform])
if waveform != 3:
setv(g2mp.OutputType, 5) # BipInv
setv(g2mp.Active, 1 - getv(nmmp.Mute))
self.kbt = g2m.params.Kbt
ratemodin, rateparam, slv, kbt = handleslv(self, g2m.inputs.RateVar,
g2mp.RateMod)
self.inputs[0], self.outputs[1], kbt = ratemodin, slv, kbt
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
shpexp = self.add_module('ShpExp')
setv(shpexp.params.Curve, 2) # x4
setv(shpexp.params.Amount, 127)
constswt = self.add_module('ConstSwT')
setv(constswt.params.On, 1)
setv(constswt.params.Lev, getv(nmmp.Gain))
setv(constswt.params.BipUni, getv(nmmp.Unipolar))
self.connect(shpexp.outputs.Out, g2m.inputs.Mod)
self.connect(constswt.outputs.Out, shpexp.inputs.In)
self.params = constswt.params.Lev, constswt.params.BipUni
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
waveform = getv(nmmp.Waveform)
setv(g2mp.Waveform, [0, 1, 2, 2, 3][waveform])
if waveform != 3:
setv(g2mp.OutputType, 5) # BipInv
setv(g2mp.Active, 1-getv(nmmp.Mute))
self.kbt = g2m.params.Kbt
ratemodin, rateparam, slv, kbt = handleslv(self,
g2m.inputs.RateVar, g2mp.RateMod)
self.inputs[0], self.outputs[1], kbt = ratemodin, slv, kbt
def handlepw(conv, pw, haspw, shape, shapemod):
nmm, g2m = conv.nmmodule, conv.g2module
nmmp, g2mp = nmm.params, g2m.params
# add mix2-1b so input can be doubled/inverted
pwmod = None
if haspw:
pw = getv(nmmp.PulseWidth)
else:
pw = 0
if len(nmm.inputs.PwMod.cables):
clip = conv.add_module('Clip', name='PWLimit')
setv(clip.params.Shape, 1) # Sym
mix11a = conv.add_module('Mix1-1A', name='ShapeMod')
setv(mix11a.params.ExpLin, 1) # Lin
setv(mix11a.params.On, 1)
mix11a.params.On.labels = ['Mod']
if haspw and pw != 64:
constswt = conv.add_module('ConstSwT', name='Shape')
setv(constswt.params.On, 1)
constswt.params.On.labels = ['Shape']
mix21b = conv.add_module('Mix2-1B', name='ModIn')
conv.connect(clip.outputs.Out, g2m.inputs.ShapeMod)
conv.connect(mix11a.outputs.Out, clip.inputs.In)
if haspw and pw != 64:
conv.connect(constswt.outputs.Out, mix11a.inputs.Chain)
conv.connect(mix21b.outputs.Out, mix11a.inputs.In)
setv(constswt.params.Lev, pw)
else:
conv.connect(mix21b.outputs.Out, mix11a.inputs.In)
conv.connect(mix21b.inputs.In1, mix21b.inputs.In2)
setv(clip.params.ClipLev, 2)
setv(mix21b.params.Lev1, 126)
setv(mix21b.params.Lev2, 127)
setv(g2mp.Shape, 0)
setv(g2mp.ShapeMod, 127)
setv(mix11a.params.Lev, getv(nmmp.PwMod))
conv.params[shapemod] = mix11a.params.Lev
if shape > -1 and pw != 64:
conv.params[shape] = constswt.params.Lev
return mix21b.inputs.In1
elif haspw and pw != 64:
constswt = conv.add_module('ConstSwT', name='Shape')
setv(constswt.params.On, 1)
constswt.params.On.labels = ['Shape']
setv(constswt.params.Lev, pw)
setv(g2mp.Shape, 0)
setv(g2mp.ShapeMod, 126)
conv.connect(constswt.outputs.Out, g2m.inputs.ShapeMod)
return pwmod
def handlepw(conv, pw, haspw, shape, shapemod):
nmm, g2m = conv.nmmodule, conv.g2module
nmmp, g2mp = nmm.params, g2m.params
# add mix2-1b so input can be doubled/inverted
pwmod = None
if haspw:
pw = getv(nmmp.PulseWidth)
else:
pw = 0
if len(nmm.inputs.PwMod.cables):
clip = conv.add_module('Clip', name='PWLimit')
setv(clip.params.Shape, 1) # Sym
mix11a = conv.add_module('Mix1-1A', name='ShapeMod')
setv(mix11a.params.ExpLin, 1) # Lin
setv(mix11a.params.On, 1)
mix11a.params.On.labels = ['Mod']
if haspw and pw != 64:
constswt = conv.add_module('ConstSwT', name='Shape')
setv(constswt.params.On, 1)
constswt.params.On.labels = ['Shape']
mix21b = conv.add_module('Mix2-1B', name='ModIn')
conv.connect(clip.outputs.Out, g2m.inputs.ShapeMod)
conv.connect(mix11a.outputs.Out, clip.inputs.In)
if haspw and pw != 64:
conv.connect(constswt.outputs.Out, mix11a.inputs.Chain)
conv.connect(mix21b.outputs.Out, mix11a.inputs.In)
setv(constswt.params.Lev, pw)
else:
conv.connect(mix21b.outputs.Out, mix11a.inputs.In)
conv.connect(mix21b.inputs.In1, mix21b.inputs.In2)
setv(clip.params.ClipLev, 2)
setv(mix21b.params.Lev1, 126)
setv(mix21b.params.Lev2, 127)
setv(g2mp.Shape, 0)
setv(g2mp.ShapeMod, 127)
setv(mix11a.params.Lev, getv(nmmp.PwMod))
conv.params[shapemod] = mix11a.params.Lev
if shape > -1 and pw != 64:
conv.params[shape] = constswt.params.Lev
return mix21b.inputs.In1
elif haspw and pw != 64:
constswt = conv.add_module('ConstSwT', name='Shape')
setv(constswt.params.On, 1)
constswt.params.On.labels = ['Shape']
setv(constswt.params.Lev, pw)
setv(g2mp.Shape, 0)
setv(g2mp.ShapeMod, 126)
conv.connect(constswt.outputs.Out, g2m.inputs.ShapeMod)
return pwmod
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
# handle special parameters
waveform = getv(nmmp.Waveform)
setv(g2mp.Waveform, [0, 1, 2, 2, 3][waveform])
if waveform != 3:
setv(g2mp.OutputType, 5) # BipInv
else:
# 180 phase
setv(g2mp.Phase, (range(64, 128) + range(64))[getv(nmmp.Phase)])
setv(g2mp.Active, 1 - getv(nmmp.Mute))
postmst(self, 0)
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
# handle special parameters
waveform = getv(nmmp.Waveform)
setv(g2mp.Waveform, [0, 1, 2, 2, 3][waveform])
if waveform != 3:
setv(g2mp.OutputType, 5) # BipInv
else:
# 180 phase
setv(g2mp.Phase, (range(64, 128)+range(64))[getv(nmmp.Phase)])
setv(g2mp.Active, 1-getv(nmmp.Mute))
postmst(self, 0)
def updatevals(g2mp, params, nm1g2_map):
'''updatevals(g2mp, params, nm1g2_map) -> None
change the time values of g2 module based on tables in ./units.py.
'''
for param in params:
midival = getv(getattr(g2mp, param))
setv(getattr(g2mp, param), nm1g2_map[midival])
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
handlegate(self)
# handle special parameters
updatevals(g2mp, ['Attack', 'Decay', 'Release'], adsrtime_map)
if len(nmm.inputs.AttackMod.cables):
levconv = self.add_module('LevConv', name='Attack')
setv(levconv.params.InputType, 0) # Bip
setv(levconv.params.OutputType, 5) # BipInv
self.connect(levconv.outputs.Out, g2m.inputs.AttackMod)
self.inputs[2] = levconv.inputs.In
if len(nmm.inputs.DecayMod.cables):
levconv = self.add_module('LevConv', name='Decay')
setv(levconv.params.InputType, 0) # Bip
setv(levconv.params.OutputType, 5) # BipInv
self.connect(levconv.outputs.Out, g2m.inputs.DecayMod)
self.inputs[3] = levconv.inputs.In
if len(nmm.inputs.ReleaseMod.cables):
levconv = self.add_module('LevConv', name='Release')
setv(levconv.params.InputType, 0) # Bip
setv(levconv.params.OutputType, 5) # BipInv
self.connect(levconv.outputs.Out, g2m.inputs.ReleaseMod)
self.inputs[5] = levconv.inputs.In
setv(g2mp.OutputType, [0, 3][getv(nmmp.Invert)])
self.inputs[:2] = handleretrig(self)
def handlekbt(conv, input, kbt100, addalways=False):
"""handlekbt(conv, input, kbt100, addalways=False) -> input
"""
nmm, g2m = conv.nmmodule, conv.g2module
nmmp, g2mp = nmm.params, g2m.params
kbt = getv(nmmp.Kbt)
if addalways:
pass
elif kbt == 0:
setv(conv.kbt, kbt)
return None
elif kbt == 64:
setv(conv.kbt, kbt100)
return None
if not g2m.area.keyboard:
g2m.area.keyboard = conv.add_module("Keyboard")
keyboard = g2m.area.keyboard
setv(conv.kbt, 0)
mix21b = conv.add_module("Mix2-1B", name="Kbt")
conv.connect(keyboard.outputs.Note, mix21b.inputs.In1)
conv.connect(mix21b.inputs.In1, mix21b.inputs.In2)
conv.connect(mix21b.outputs.Out, input)
setv(mix21b.params.ExpLin, 1) # Lin
setv(mix21b.params.Lev1, kbttable[kbt][0])
setv(mix21b.params.Lev2, kbttable[kbt][1])
return input
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
handlegate(self)
# handle special parameters
updatevals(g2mp, ['Attack', 'Decay', 'Release'], adsrtime_map)
if len(nmm.inputs.AttackMod.cables):
levconv = self.add_module('LevConv', name='Attack')
setv(levconv.params.InputType, 0) # Bip
setv(levconv.params.OutputType, 5) # BipInv
self.connect(levconv.outputs.Out, g2m.inputs.AttackMod)
self.inputs[2] = levconv.inputs.In
if len(nmm.inputs.DecayMod.cables):
levconv = self.add_module('LevConv', name='Decay')
setv(levconv.params.InputType, 0) # Bip
setv(levconv.params.OutputType, 5) # BipInv
self.connect(levconv.outputs.Out, g2m.inputs.DecayMod)
self.inputs[3] = levconv.inputs.In
if len(nmm.inputs.ReleaseMod.cables):
levconv = self.add_module('LevConv', name='Release')
setv(levconv.params.InputType, 0) # Bip
setv(levconv.params.OutputType, 5) # BipInv
self.connect(levconv.outputs.Out, g2m.inputs.ReleaseMod)
self.inputs[5] = levconv.inputs.In
setv(g2mp.OutputType, [0, 3][getv(nmmp.Invert)])
self.inputs[:2] = handleretrig(self)
def handlekbt(conv, input, kbt100, addalways=False):
'''handlekbt(conv, input, kbt100, addalways=False) -> input
'''
nmm, g2m = conv.nmmodule, conv.g2module
nmmp, g2mp = nmm.params, g2m.params
kbt = getv(nmmp.Kbt)
if addalways:
pass
elif kbt == 0:
setv(conv.kbt, kbt)
return None
elif kbt == 64:
setv(conv.kbt, kbt100)
return None
if not g2m.area.keyboard:
g2m.area.keyboard = conv.add_module('Keyboard')
keyboard = g2m.area.keyboard
setv(conv.kbt, 0)
mix21b = conv.add_module('Mix2-1B', name='Kbt')
conv.connect(keyboard.outputs.Note, mix21b.inputs.In1)
conv.connect(mix21b.inputs.In1, mix21b.inputs.In2)
conv.connect(mix21b.outputs.Out, input)
setv(mix21b.params.ExpLin, 1) # Lin
setv(mix21b.params.Lev1, kbttable[kbt][0])
setv(mix21b.params.Lev2, kbttable[kbt][1])
return input
def __init__(self, nmarea, g2area, nmmodule, options):
# use mixer if knobs, morphs, or midi cc's assigned and connected
usemixer = False
for i in xrange(1, 5):
level = getattr(nmmodule.params, 'Level%d' % i)
innet = getattr(nmmodule.inputs, 'In%d' % i).net
if not innet:
continue
if level.knob or level.morph or level.ctrl:
usemixer = True
if getv(level) != 127 and getv(level) != 0:
usemixer = True
if usemixer:
self.maing2module = 'Mix4-1C'
self.parammap[0] = None
super(Conv4_1Switch, self).__init__(nmarea, g2area, nmmodule, options)
def updatevals(g2mp, params, nm1g2_map):
"""updatevals(g2mp, params, nm1g2_map) -> None
change the time values of g2 module based on tables in ./units.py.
"""
for param in params:
midival = getv(getattr(g2mp, param))
setv(getattr(g2mp, param), nm1g2_map[midival])
def __init__(self, nmarea, g2area, nmmodule, options):
lev = nmmodule.params.Level
if getv(lev) == 127 and not lev.knob and not lev.morph and not lev.ctrl:
self.maing2module = '2-Out'
if len(filter(isxoutput, nmarea.modules)) < 2:
self.maing2module = '2-Out'
Convert.__init__(self, nmarea, g2area, nmmodule, options)
def __init__(self, nmarea, g2area, nmmodule, options):
# use mixer if knobs, morphs, or midi cc's assigned and connected
usemixer = False
for i in xrange(1, 5):
level = getattr(nmmodule.params, 'Level%d' % i)
innet = getattr(nmmodule.inputs, 'In%d' % i).net
if not innet:
continue
if level.knob or level.morph or level.ctrl:
usemixer = True
if getv(level) != 127 and getv(level) != 0:
usemixer = True
if usemixer:
self.maing2module = 'Mix4-1C'
self.parammap[0] = None
super(Conv4_1Switch, self).__init__(nmarea, g2area, nmmodule, options)
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
if getv(nmmp.Color) == 1:
setv(g2mp.StepProb, 43)
else:
setv(g2mp.StepProb, 127)
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
mode = getv(nmmp.Mode)
setv(g2mp.Mode, [0, 1, 0, 2, 3][mode])
if mode == 2:
setv(g2mp.Active, 0)
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
g2m.name = 'KbdSplit'
# now lets create the structure
struct = [
['Constant', 'Upper'],
['CompLev', 'Lower'],
['CompSig', '<=Upper'],
['Gate', 'Gate'],
]
for mod, nm in struct:
self.add_module(mod, name=nm)
u, l, lu, g = self.g2modules
setv(u.params.Level, getv(nmmp.Upper))
setv(l.params.C, getv(nmmp.Lower))
self.connect(u.outputs.Out, lu.inputs.A)
self.connect(l.inputs.In, lu.inputs.B)
self.connect(l.outputs.Out, g.inputs.In1_1)
self.connect(lu.outputs.Out, g.inputs.In1_2)
self.connect(g.outputs.Out1, g.inputs.In2_2)
gout = g.outputs.Out2
nout = None
if len(nmm.outputs.Note.cables):
n = self.add_module('DlyClock', name='Note')
self.connect(gout, n.inputs.Clk)
self.connect(lu.inputs.B, n.inputs.In)
gout = n.inputs.Clk
nout = n.outputs.Out
vin = vout = None
if len(nmm.outputs.Vel.cables) or len(nmm.inputs.Vel.cables):
v = self.add_module('DlyClock', name='Vel')
self.connect(gout, v.inputs.Clk)
vin = v.inputs.In
vout = v.outputs.Out
self.params = [l.params.C, u.params.Level]
self.outputs = [nout, g.outputs.Out2, vout]
self.inputs = [l.inputs.In, g.inputs.In2_1, vin]
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
if getv(nmmp.Color) == 1:
setv(g2mp.StepProb, 43)
else:
setv(g2mp.StepProb, 127)
def __init__(self, nmarea, g2area, nmmodule, options):
lev = nmmodule.params.Level
if getv(lev
) == 127 and not lev.knob and not lev.morph and not lev.ctrl:
self.maing2module = '2-Out'
if len(filter(isxoutput, nmarea.modules)) < 2:
self.maing2module = '2-Out'
Convert.__init__(self, nmarea, g2area, nmmodule, options)
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
setv(g2mp.Active, 1-getv(nmmp.Bypass))
setv(g2mp.FBMod, getv(nmmp.Depth))
setv(g2mp.Type, 3)
setv(g2mp.Level, modtable[getv(nmmp.Level)][0])
if len(nmm.inputs.FreqMod.cables):
# add mixer
mix = self.add_module('Mix2-1B', name='FreqMod')
self.connect(mix.outputs.Out, g2m.inputs.PitchVar)
modinp = mix.inputs.In1
self.inputs[1] = mix.inputs.In2
setv(g2mp.PitchMod, 127)
setv(mix.params.Lev1, getv(nmmp.FreqMod))
depthparam = mix.params.Lev1
else:
modinp = g2m.inputs.PitchVar
depthparam = g2mp.PitchMod
lfo = self.add_module('LfoC')
setv(lfo.params.Rate, getv(nmmp.Rate))
self.params[0] = lfo.params.Rate
setv(lfo.params.Active, getv(nmmp.Lfo))
self.params[1] = lfo.params.Active
self.connect(lfo.outputs.Out, modinp)
setv(depthparam, getv(nmmp.Depth))
self.params[9] = depthparam
def domodule(self):
nmm, g2m = self.nmmodule, self.g2module
nmmp, g2mp = nmm.params, g2m.params
setv(g2mp.StepProb, 96)
lfoc = self.add_module('LfoC', name='Clk')
self.connect(lfoc.outputs.Out, g2m.inputs.Clk)
setv(lfoc.params.Rate, getv(nmmp.Density))
self.params[0] = lfoc.params.Rate