region.CreateFinish() #DOC-END initialisation #DOC-START basis # Define a bilinear Lagrange basis basis = iron.Basis() basis.CreateStart(basisUserNumber) basis.type = iron.BasisTypes.LAGRANGE_HERMITE_TP basis.numberOfXi = 1 basis.interpolationXi = [iron.BasisInterpolationSpecifications.LINEAR_LAGRANGE] basis.CreateFinish() #DOC-END basis #DOC-START generated mesh # Create a generated mesh generatedMesh = iron.GeneratedMesh() generatedMesh.CreateStart(generatedMeshUserNumber, region) generatedMesh.type = iron.GeneratedMeshTypes.REGULAR generatedMesh.basis = [basis] generatedMesh.extent = [width] generatedMesh.numberOfElements = [numberOfXElements] mesh = iron.Mesh() generatedMesh.CreateFinish(meshUserNumber, mesh) #DOC-END generated mesh #DOC-START decomposition # Create a decomposition for the mesh decomposition = iron.Decomposition() decomposition.CreateStart(decompositionUserNumber, mesh) decomposition.type = iron.DecompositionTypes.CALCULATED
def LidDriven(numberOfElements, cavityDimensions, lidVelocity, viscosity,
density, outputFilename, transient, RBS, fdJacobian, analytic,
basisList):
""" Sets up the lid driven cavity problem and solves with the provided parameter values
Square Lid-Driven Cavity
v=1
>>>>>>>>>>
1| |
| |
v=0 | | v=0
| |
| |
------------
0 v=0 1
"""
# Create a generated mesh
generatedMesh = iron.GeneratedMesh()
generatedMesh.CreateStart(generatedMeshUserNumber, region)
generatedMesh.type = iron.GeneratedMeshTypes.REGULAR
generatedMesh.basis = basisList
generatedMesh.extent = cavityDimensions
generatedMesh.numberOfElements = numberOfElements
mesh = iron.Mesh()
generatedMesh.CreateFinish(meshUserNumber, mesh)
# Create a decomposition for the mesh
decomposition = iron.Decomposition()
decomposition.CreateStart(decompositionUserNumber, mesh)
decomposition.type = iron.DecompositionTypes.CALCULATED
decomposition.numberOfDomains = numberOfComputationalNodes
decomposition.CreateFinish()
# Create a field for the geometry
geometricField = iron.Field()
geometricField.CreateStart(geometricFieldUserNumber, region)
geometricField.meshDecomposition = decomposition
geometricField.ComponentMeshComponentSet(iron.FieldVariableTypes.U, 1, 1)
geometricField.ComponentMeshComponentSet(iron.FieldVariableTypes.U, 2, 1)
geometricField.CreateFinish()
# Set geometry from the generated mesh
generatedMesh.GeometricParametersCalculate(geometricField)
# Create standard Navier-Stokes equations set
equationsSetField = iron.Field()
equationsSet = iron.EquationsSet()
if RBS:
equationsSetSpecification = [
iron.EquationsSetClasses.FLUID_MECHANICS,
iron.EquationsSetTypes.NAVIER_STOKES_EQUATION,
iron.EquationsSetSubtypes.TRANSIENT_RBS_NAVIER_STOKES
]
else:
equationsSetSpecification = [
iron.EquationsSetClasses.FLUID_MECHANICS,
iron.EquationsSetTypes.NAVIER_STOKES_EQUATION,
iron.EquationsSetSubtypes.TRANSIENT_NAVIER_STOKES
]
equationsSet.CreateStart(equationsSetUserNumber, region, geometricField,
equationsSetSpecification,
equationsSetFieldUserNumber, equationsSetField)
equationsSet.CreateFinish()
if RBS:
# Set max CFL number (default 1.0)
equationsSetField.ComponentValuesInitialiseDP(
iron.FieldVariableTypes.U1, iron.FieldParameterSetTypes.VALUES, 2,
1.0E20)
# Set time increment (default 0.0)
equationsSetField.ComponentValuesInitialiseDP(
iron.FieldVariableTypes.U1, iron.FieldParameterSetTypes.VALUES, 3,
transient[2])
# Set stabilisation type (default 1.0 = RBS)
equationsSetField.ComponentValuesInitialiseDP(
iron.FieldVariableTypes.U1, iron.FieldParameterSetTypes.VALUES, 4,
1.0)
# Create dependent field
dependentField = iron.Field()
equationsSet.DependentCreateStart(dependentFieldUserNumber, dependentField)
dependentField.ComponentMeshComponentSet(iron.FieldVariableTypes.U, 1, 1)
dependentField.ComponentMeshComponentSet(iron.FieldVariableTypes.U, 2, 1)
dependentField.ComponentMeshComponentSet(iron.FieldVariableTypes.U, 3, 2)
dependentField.ComponentMeshComponentSet(iron.FieldVariableTypes.DELUDELN,
1, 1)
dependentField.ComponentMeshComponentSet(iron.FieldVariableTypes.DELUDELN,
2, 1)
dependentField.ComponentMeshComponentSet(iron.FieldVariableTypes.DELUDELN,
3, 2)
dependentField.DOFOrderTypeSet(iron.FieldVariableTypes.U,
iron.FieldDOFOrderTypes.SEPARATED)
dependentField.DOFOrderTypeSet(iron.FieldVariableTypes.DELUDELN,
iron.FieldDOFOrderTypes.SEPARATED)
equationsSet.DependentCreateFinish()
# Initialise dependent field
dependentField.ComponentValuesInitialiseDP(
iron.FieldVariableTypes.U, iron.FieldParameterSetTypes.VALUES, 1, 0.0)
# Create materials field
materialsField = iron.Field()
equationsSet.MaterialsCreateStart(materialsFieldUserNumber, materialsField)
equationsSet.MaterialsCreateFinish()
# Initialise materials field parameters
materialsField.ComponentValuesInitialiseDP(
iron.FieldVariableTypes.U, iron.FieldParameterSetTypes.VALUES, 1,
viscosity)
materialsField.ComponentValuesInitialiseDP(
iron.FieldVariableTypes.U, iron.FieldParameterSetTypes.VALUES, 2,
density)
# If specified, use a sinusoidal waveform to ramp up lid velocity from 0 to 1
if analytic:
# yOffset + amplitude*sin(frequency*time + phaseShift))))
# Set the time it takes to ramp velocity up to full lid velocity
rampPeriod = 10.0
frequency = math.pi / (rampPeriod)
amplitude = 0.5 * lidVelocity[0]
yOffset = 0.5 * lidVelocity[0]
phaseShift = -math.pi / 2.0
startSine = 0.0
stopSine = rampPeriod
analyticField = iron.Field()
equationsSet.AnalyticCreateStart(
iron.NavierStokesAnalyticFunctionTypes.SINUSOID,
analyticFieldUserNumber, analyticField)
equationsSet.AnalyticCreateFinish()
analyticParameters = [
1.0, 0.0, 0.0, 0.0, amplitude, yOffset, frequency, phaseShift,
startSine, stopSine
]
# Create equations
equations = iron.Equations()
equationsSet.EquationsCreateStart(equations)
equations.sparsityType = iron.EquationsSparsityTypes.SPARSE
equations.outputType = iron.EquationsOutputTypes.NONE
equationsSet.EquationsCreateFinish()
# Create Navier-Stokes problem
problem = iron.Problem()
if RBS:
problemSpecification = [
iron.ProblemClasses.FLUID_MECHANICS,
iron.ProblemTypes.NAVIER_STOKES_EQUATION,
iron.ProblemSubtypes.TRANSIENT_RBS_NAVIER_STOKES
]
else:
problemSpecification = [
iron.ProblemClasses.FLUID_MECHANICS,
iron.ProblemTypes.NAVIER_STOKES_EQUATION,
iron.ProblemSubtypes.TRANSIENT_NAVIER_STOKES
]
problem.CreateStart(problemUserNumber, problemSpecification)
problem.CreateFinish()
# Create control loops
problem.ControlLoopCreateStart()
controlLoop = iron.ControlLoop()
problem.ControlLoopGet([iron.ControlLoopIdentifiers.NODE], controlLoop)
controlLoop.TimesSet(transient[0], transient[1], transient[2])
controlLoop.TimeOutputSet(transient[3])
problem.ControlLoopCreateFinish()
# Create problem solver
dynamicSolver = iron.Solver()
problem.SolversCreateStart()
problem.SolverGet([iron.ControlLoopIdentifiers.NODE], 1, dynamicSolver)
dynamicSolver.outputType = iron.SolverOutputTypes.NONE
dynamicSolver.dynamicTheta = [0.5]
nonlinearSolver = iron.Solver()
dynamicSolver.DynamicNonlinearSolverGet(nonlinearSolver)
if fdJacobian:
nonlinearSolver.newtonJacobianCalculationType = iron.JacobianCalculationTypes.FD
else:
nonlinearSolver.newtonJacobianCalculationType = iron.JacobianCalculationTypes.EQUATIONS
nonlinearSolver.outputType = iron.SolverOutputTypes.NONE
nonlinearSolver.newtonAbsoluteTolerance = 1.0E-8
nonlinearSolver.newtonRelativeTolerance = 1.0E-9
nonlinearSolver.newtonSolutionTolerance = 1.0E-9
nonlinearSolver.newtonMaximumFunctionEvaluations = 10000
nonlinearSolver.newtonLineSearchType = iron.NewtonLineSearchTypes.QUADRATIC
linearSolver = iron.Solver()
nonlinearSolver.NewtonLinearSolverGet(linearSolver)
linearSolver.outputType = iron.SolverOutputTypes.NONE
linearSolver.linearType = iron.LinearSolverTypes.DIRECT
linearSolver.libraryType = iron.SolverLibraries.MUMPS
problem.SolversCreateFinish()
# Create solver equations and add equations set to solver equations
solver = iron.Solver()
solverEquations = iron.SolverEquations()
problem.SolverEquationsCreateStart()
problem.SolverGet([iron.ControlLoopIdentifiers.NODE], 1, solver)
solver.SolverEquationsGet(solverEquations)
solverEquations.sparsityType = iron.SolverEquationsSparsityTypes.SPARSE
equationsSetIndex = solverEquations.EquationsSetAdd(equationsSet)
problem.SolverEquationsCreateFinish()
# Create boundary conditions
boundaryConditions = iron.BoundaryConditions()
solverEquations.BoundaryConditionsCreateStart(boundaryConditions)
nodes = iron.Nodes()
region.NodesGet(nodes)
print("Total # of nodes: " + str(nodes.numberOfNodes))
print("Analytic Parameters: " + str(analyticParameters))
boundaryTolerance = 1.0e-6
# Currently issues with getting generated mesh surfaces through python so easier to just loop over all nodes
for node in range(nodes.numberOfNodes):
nodeId = node + 1
nodeNumber = nodes.UserNumberGet(nodeId)
# print('node number: '+ str(nodeNumber))
# Velocity nodes
nodeDomain = decomposition.NodeDomainGet(nodeNumber, 1)
if (nodeDomain == computationalNodeNumber):
xLocation = geometricField.ParameterSetGetNodeDP(
iron.FieldVariableTypes.U, iron.FieldParameterSetTypes.VALUES,
1, 1, nodeNumber, 1)
yLocation = geometricField.ParameterSetGetNodeDP(
iron.FieldVariableTypes.U, iron.FieldParameterSetTypes.VALUES,
1, 1, nodeNumber, 2)
# rigid wall (left,right,bottom) conditions: v=0
if (xLocation < boundaryTolerance
or cavityDimensions[0] - xLocation < boundaryTolerance
or yLocation < boundaryTolerance):
boundaryConditions.SetNode(dependentField,
iron.FieldVariableTypes.U, 1, 1,
nodeNumber, 1,
iron.BoundaryConditionsTypes.FIXED,
0.0)
boundaryConditions.SetNode(dependentField,
iron.FieldVariableTypes.U, 1, 1,
nodeNumber, 2,
iron.BoundaryConditionsTypes.FIXED,
0.0)
# lid (top) conditions: v=v
elif (cavityDimensions[1] - yLocation < boundaryTolerance):
if not (xLocation < boundaryTolerance or
cavityDimensions[0] - xLocation < boundaryTolerance):
if analytic:
boundaryConditions.SetNode(
dependentField, iron.FieldVariableTypes.U, 1, 1,
nodeNumber, 1,
iron.BoundaryConditionsTypes.FIXED_INLET, 0.0)
boundaryConditions.SetNode(
dependentField, iron.FieldVariableTypes.U, 1, 1,
nodeNumber, 2,
iron.BoundaryConditionsTypes.FIXED_INLET, 0.0)
# Set analytic parameters
parameterNumber = 0
for parameter in analyticParameters:
parameterNumber += 1
analyticField.ParameterSetUpdateNodeDP(
iron.FieldVariableTypes.U,
iron.FieldParameterSetTypes.VALUES, 1, 1,
nodeNumber, parameterNumber, parameter)
else:
boundaryConditions.SetNode(
dependentField, iron.FieldVariableTypes.U, 1, 1,
nodeNumber, 1, iron.BoundaryConditionsTypes.FIXED,
lidVelocity[0])
boundaryConditions.SetNode(
dependentField, iron.FieldVariableTypes.U, 1, 1,
nodeNumber, 2, iron.BoundaryConditionsTypes.FIXED,
lidVelocity[1])
# Pressure node
nodeNumber = 1
nodeDomain = decomposition.NodeDomainGet(nodeNumber, 2)
if (nodeDomain == computationalNodeNumber):
# bottom left node - reference pressure: p=0
boundaryConditions.SetNode(dependentField, iron.FieldVariableTypes.U,
1, 1, nodeNumber, 3,
iron.BoundaryConditionsTypes.FIXED, 0.0)
print('pressure node: ' + str(nodeNumber))
solverEquations.BoundaryConditionsCreateFinish()
# Solve the problem
print("solving...")
problem.Solve()
print("exporting CMGUI data")
# Export results
fields = iron.Fields()
fields.CreateRegion(region)
fields.NodesExport(outputFilename, "FORTRAN")
fields.ElementsExport(outputFilename, "FORTRAN")
fields.Finalise()
# Clear fields so can run in batch mode on this region
generatedMesh.Destroy()
nodes.Destroy()
mesh.Destroy()
geometricField.Destroy()
if RBS:
equationsSetField.Destroy()
if analytic:
analyticField.Destroy()
dependentField.Destroy()
materialsField.Destroy()
equationsSet.Destroy()
problem.Destroy()
