Esempio n. 1
0
    def get_cam_can_parser(CP):
        if CP.carFingerprint in PREGLOBAL_CARS:
            signals = [
                ("Cruise_Set_Speed", "ES_DashStatus", 0),
                ("Not_Ready_Startup", "ES_DashStatus", 0),
                ("Throttle_Cruise", "ES_CruiseThrottle", 0),
                ("Signal1", "ES_CruiseThrottle", 0),
                ("Cruise_Activated", "ES_CruiseThrottle", 0),
                ("Signal2", "ES_CruiseThrottle", 0),
                ("Brake_On", "ES_CruiseThrottle", 0),
                ("DistanceSwap", "ES_CruiseThrottle", 0),
                ("Standstill", "ES_CruiseThrottle", 0),
                ("Signal3", "ES_CruiseThrottle", 0),
                ("CloseDistance", "ES_CruiseThrottle", 0),
                ("Signal4", "ES_CruiseThrottle", 0),
                ("Standstill_2", "ES_CruiseThrottle", 0),
                ("ES_Error", "ES_CruiseThrottle", 0),
                ("Signal5", "ES_CruiseThrottle", 0),
                ("Counter", "ES_CruiseThrottle", 0),
                ("Signal6", "ES_CruiseThrottle", 0),
                ("Button", "ES_CruiseThrottle", 0),
                ("Signal7", "ES_CruiseThrottle", 0),
            ]

            checks = [
                ("ES_DashStatus", 20),
                ("ES_CruiseThrottle", 20),
            ]
        else:
            signals = [
                ("Cruise_Set_Speed", "ES_DashStatus", 0),
                ("Conventional_Cruise", "ES_DashStatus", 0),
                ("Counter", "ES_Distance", 0),
                ("Signal1", "ES_Distance", 0),
                ("Cruise_Fault", "ES_Distance", 0),
                ("Cruise_Throttle", "ES_Distance", 0),
                ("Signal2", "ES_Distance", 0),
                ("Car_Follow", "ES_Distance", 0),
                ("Signal3", "ES_Distance", 0),
                ("Cruise_Brake_Active", "ES_Distance", 0),
                ("Distance_Swap", "ES_Distance", 0),
                ("Cruise_EPB", "ES_Distance", 0),
                ("Signal4", "ES_Distance", 0),
                ("Close_Distance", "ES_Distance", 0),
                ("Signal5", "ES_Distance", 0),
                ("Cruise_Cancel", "ES_Distance", 0),
                ("Cruise_Set", "ES_Distance", 0),
                ("Cruise_Resume", "ES_Distance", 0),
                ("Signal6", "ES_Distance", 0),
                ("Counter", "ES_LKAS_State", 0),
                ("Keep_Hands_On_Wheel", "ES_LKAS_State", 0),
                ("Empty_Box", "ES_LKAS_State", 0),
                ("Signal1", "ES_LKAS_State", 0),
                ("LKAS_ACTIVE", "ES_LKAS_State", 0),
                ("Signal2", "ES_LKAS_State", 0),
                ("Backward_Speed_Limit_Menu", "ES_LKAS_State", 0),
                ("LKAS_ENABLE_3", "ES_LKAS_State", 0),
                ("LKAS_Left_Line_Light_Blink", "ES_LKAS_State", 0),
                ("LKAS_ENABLE_2", "ES_LKAS_State", 0),
                ("LKAS_Right_Line_Light_Blink", "ES_LKAS_State", 0),
                ("LKAS_Left_Line_Visible", "ES_LKAS_State", 0),
                ("LKAS_Left_Line_Green", "ES_LKAS_State", 0),
                ("LKAS_Right_Line_Visible", "ES_LKAS_State", 0),
                ("LKAS_Right_Line_Green", "ES_LKAS_State", 0),
                ("LKAS_Alert", "ES_LKAS_State", 0),
                ("Signal3", "ES_LKAS_State", 0),
            ]

            checks = [
                ("ES_DashStatus", 10),
                ("ES_Distance", 20),
                ("ES_LKAS_State", 10),
            ]

        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 2)
Esempio n. 2
0
    def get_can_parser(CP):
        signals = [
            # sig_name, sig_address, default
            ("WHL_SPD_FL", "WHL_SPD11", 0),
            ("WHL_SPD_FR", "WHL_SPD11", 0),
            ("WHL_SPD_RL", "WHL_SPD11", 0),
            ("WHL_SPD_RR", "WHL_SPD11", 0),
            ("YAW_RATE", "ESP12", 0),
            ("CF_Gway_DrvSeatBeltInd", "CGW4", 1),
            ("CF_Gway_DrvSeatBeltSw", "CGW1", 0),
            ("CF_Gway_DrvDrSw", "CGW1", 0),  # Driver Door
            ("CF_Gway_AstDrSw", "CGW1", 0),  # Passenger door
            ("CF_Gway_RLDrSw", "CGW2", 0),  # Rear reft door
            ("CF_Gway_RRDrSw", "CGW2", 0),  # Rear right door
            ("CF_Gway_TSigLHSw", "CGW1", 0),
            ("CF_Gway_TurnSigLh", "CGW1", 0),
            ("CF_Gway_TSigRHSw", "CGW1", 0),
            ("CF_Gway_TurnSigRh", "CGW1", 0),
            ("CF_Gway_ParkBrakeSw", "CGW1", 0),
            ("CYL_PRES", "ESP12", 0),
            ("AVH_STAT", "ESP11", 0),
            ("CF_Clu_CruiseSwState", "CLU11", 0),
            ("CF_Clu_CruiseSwMain", "CLU11", 0),
            ("CF_Clu_SldMainSW", "CLU11", 0),
            ("CF_Clu_ParityBit1", "CLU11", 0),
            ("CF_Clu_VanzDecimal", "CLU11", 0),
            ("CF_Clu_Vanz", "CLU11", 0),
            ("CF_Clu_SPEED_UNIT", "CLU11", 0),
            ("CF_Clu_DetentOut", "CLU11", 0),
            ("CF_Clu_RheostatLevel", "CLU11", 0),
            ("CF_Clu_CluInfo", "CLU11", 0),
            ("CF_Clu_AmpInfo", "CLU11", 0),
            ("CF_Clu_AliveCnt1", "CLU11", 0),
            ("ACCEnable", "TCS13", 0),
            ("BrakeLight", "TCS13", 0),
            ("DriverBraking", "TCS13", 0),
            ("DriverOverride", "TCS13", 0),
            ("PBRAKE_ACT", "TCS13", 0),
            ("CF_VSM_Avail", "TCS13", 0),
            ("ESC_Off_Step", "TCS15", 0),
            ("AVH_LAMP", "TCS15", 0),
            ("CF_Lvr_CruiseSet", "LVR12", 0),
            ("CRUISE_LAMP_M", "EMS16", 0),
            ("CR_FCA_Alive", "FCA11", 0),
            ("Supplemental_Counter", "FCA11", 0),
            ("MainMode_ACC", "SCC11", 0),
            ("SCCInfoDisplay", "SCC11", 0),
            ("AliveCounterACC", "SCC11", 0),
            ("VSetDis", "SCC11", 0),
            ("ObjValid", "SCC11", 0),
            ("DriverAlertDisplay", "SCC11", 0),
            ("TauGapSet", "SCC11", 4),
            ("ACC_ObjStatus", "SCC11", 0),
            ("ACC_ObjLatPos", "SCC11", 0),
            ("ACC_ObjDist", "SCC11", 150),  #TK211X value is 204.6
            ("ACC_ObjRelSpd", "SCC11", 0),
            ("Navi_SCC_Curve_Status", "SCC11", 0),
            ("Navi_SCC_Curve_Act", "SCC11", 0),
            ("Navi_SCC_Camera_Act", "SCC11", 0),
            ("Navi_SCC_Camera_Status", "SCC11", 2),
            ("ACCMode", "SCC12", 0),
            ("CF_VSM_Prefill", "SCC12", 0),
            ("CF_VSM_DecCmdAct", "SCC12", 0),
            ("CF_VSM_HBACmd", "SCC12", 0),
            ("CF_VSM_Warn", "SCC12", 0),
            ("CF_VSM_Stat", "SCC12", 0),
            ("CF_VSM_BeltCmd", "SCC12", 0),
            ("ACCFailInfo", "SCC12", 0),
            ("StopReq", "SCC12", 0),
            ("CR_VSM_DecCmd", "SCC12", 0),
            ("aReqRaw", "SCC12", 0),  #aReqMax
            ("TakeOverReq", "SCC12", 0),
            ("PreFill", "SCC12", 0),
            ("aReqValue", "SCC12", 0),  #aReqMin
            ("CF_VSM_ConfMode", "SCC12", 1),
            ("AEB_Failinfo", "SCC12", 0),
            ("AEB_Status", "SCC12", 2),
            ("AEB_CmdAct", "SCC12", 0),
            ("AEB_StopReq", "SCC12", 0),
            ("CR_VSM_Alive", "SCC12", 0),
            ("CR_VSM_ChkSum", "SCC12", 0),
            ("SCCDrvModeRValue", "SCC13", 2),
            ("SCC_Equip", "SCC13", 1),
            ("AebDrvSetStatus", "SCC13", 0),
            ("JerkUpperLimit", "SCC14", 0),
            ("JerkLowerLimit", "SCC14", 0),
            ("SCCMode2", "SCC14", 0),
            ("ComfortBandUpper", "SCC14", 0),
            ("ComfortBandLower", "SCC14", 0),
            ("UNIT", "TPMS11", 0),
            ("PRESSURE_FL", "TPMS11", 0),
            ("PRESSURE_FR", "TPMS11", 0),
            ("PRESSURE_RL", "TPMS11", 0),
            ("PRESSURE_RR", "TPMS11", 0),
        ]

        checks = [
            # address, frequency
            ("TCS13", 50),
            ("TCS15", 10),
            ("CLU11", 50),
            ("ESP12", 100),
            ("CGW1", 10),
            ("CGW2", 5),
            ("CGW4", 5),
            ("WHL_SPD11", 50),
        ]
        if CP.sccBus == 0 and CP.enableCruise:
            checks += [
                ("SCC11", 50),
                ("SCC12", 50),
            ]
        if CP.fcaBus == 0:
            signals += [
                ("FCA_CmdAct", "FCA11", 0),
                ("CF_VSM_Warn", "FCA11", 0),
            ]
            checks += [("FCA11", 50)]

        if CP.mdpsBus == 0:
            signals += [("CR_Mdps_StrColTq", "MDPS12", 0),
                        ("CF_Mdps_Def", "MDPS12", 0),
                        ("CF_Mdps_ToiActive", "MDPS12", 0),
                        ("CF_Mdps_ToiUnavail", "MDPS12", 0),
                        ("CF_Mdps_ToiFlt", "MDPS12", 0),
                        ("CF_Mdps_MsgCount2", "MDPS12", 0),
                        ("CF_Mdps_Chksum2", "MDPS12", 0),
                        ("CF_Mdps_SErr", "MDPS12", 0),
                        ("CR_Mdps_StrTq", "MDPS12", 0),
                        ("CF_Mdps_FailStat", "MDPS12", 0),
                        ("CR_Mdps_OutTq", "MDPS12", 0)]
            checks += [("MDPS12", 50)]
        if CP.sasBus == 0:
            signals += [
                ("SAS_Angle", "SAS11", 0),
                ("SAS_Speed", "SAS11", 0),
            ]
            checks += [("SAS11", 100)]

        if CP.bsmAvailable or CP.enableBsm:
            signals += [
                ("CF_Lca_Stat", "LCA11", 0),
                ("CF_Lca_IndLeft", "LCA11", 0),
                ("CF_Lca_IndRight", "LCA11", 0),
            ]
            checks += [("LCA11", 50)]

        if CP.carFingerprint in ELEC_VEH:
            signals += [
                ("Accel_Pedal_Pos", "E_EMS11", 0),
            ]
            checks += [
                ("E_EMS11", 50),
            ]
        elif CP.carFingerprint in HYBRID_VEH:
            signals += [
                ("CR_Vcu_AccPedDep_Pc", "EV_PC4", 0),
            ]
            checks += [
                ("EV_PC4", 50),
            ]
        elif CP.emsAvailable:
            signals += [
                ("PV_AV_CAN", "EMS12", 0),
                ("CF_Ems_AclAct", "EMS16", 0),
            ]
            checks += [
                ("EMS12", 100),
                ("EMS16", 100),
            ]

        if CP.carFingerprint in FEATURES["use_cluster_gears"]:
            signals += [
                ("CF_Clu_InhibitD", "CLU15", 0),
                ("CF_Clu_InhibitP", "CLU15", 0),
                ("CF_Clu_InhibitN", "CLU15", 0),
                ("CF_Clu_InhibitR", "CLU15", 0),
            ]
            checks += [("CLU15", 5)]
        elif CP.carFingerprint in FEATURES["use_tcu_gears"]:
            signals += [("CUR_GR", "TCU12", 0)]
            checks += [("TCU12", 100)]
        elif CP.evgearAvailable:
            signals += [("Elect_Gear_Shifter", "ELECT_GEAR", 0)]
            checks += [("ELECT_GEAR", 20)]
        elif CP.lvrAvailable:
            signals += [("CF_Lvr_Gear", "LVR12", 0)]
            checks += [("LVR12", 100)]

        if CP.carFingerprint in [CAR.SANTA_FE]:
            checks.remove(("TCS13", 50))

        return CANParser(DBC[CP.carFingerprint]['pt'],
                         signals,
                         checks,
                         0,
                         enforce_checks=False)
Esempio n. 3
0
  def get_can_parser(CP):
    signals = [
      # sig_name, sig_address
      ("LEFT_BLINK", "BLINK_INFO"),
      ("RIGHT_BLINK", "BLINK_INFO"),
      ("HIGH_BEAMS", "BLINK_INFO"),
      ("STEER_ANGLE", "STEER"),
      ("STEER_ANGLE_RATE", "STEER_RATE"),
      ("STEER_TORQUE_SENSOR", "STEER_TORQUE"),
      ("STEER_TORQUE_MOTOR", "STEER_TORQUE"),
      ("FL", "WHEEL_SPEEDS"),
      ("FR", "WHEEL_SPEEDS"),
      ("RL", "WHEEL_SPEEDS"),
      ("RR", "WHEEL_SPEEDS"),
    ]

    checks = [
      # sig_address, frequency
      ("BLINK_INFO", 10),
      ("STEER", 67),
      ("STEER_RATE", 83),
      ("STEER_TORQUE", 83),
      ("WHEEL_SPEEDS", 100),
    ]

    if CP.carFingerprint in GEN1:
      signals += [
        ("LKAS_BLOCK", "STEER_RATE"),
        ("LKAS_TRACK_STATE", "STEER_RATE"),
        ("HANDS_OFF_5_SECONDS", "STEER_RATE"),
        ("CRZ_ACTIVE", "CRZ_CTRL"),
        ("CRZ_AVAILABLE", "CRZ_CTRL"),
        ("CRZ_SPEED", "CRZ_EVENTS"),
        ("STANDSTILL", "PEDALS"),
        ("BRAKE_ON", "PEDALS"),
        ("BRAKE_PRESSURE", "BRAKE"),
        ("GEAR", "GEAR"),
        ("DRIVER_SEATBELT", "SEATBELT"),
        ("FL", "DOORS"),
        ("FR", "DOORS"),
        ("BL", "DOORS"),
        ("BR", "DOORS"),
        ("PEDAL_GAS", "ENGINE_DATA"),
        ("SPEED", "ENGINE_DATA"),
        ("CTR", "CRZ_BTNS"),
        ("LEFT_BS1", "BSM"),
        ("RIGHT_BS1", "BSM"),
      ]

      checks += [
        ("ENGINE_DATA", 100),
        ("CRZ_CTRL", 50),
        ("CRZ_EVENTS", 50),
        ("CRZ_BTNS", 10),
        ("PEDALS", 50),
        ("BRAKE", 50),
        ("SEATBELT", 10),
        ("DOORS", 10),
        ("GEAR", 20),
        ("BSM", 10),
      ]

    return CANParser(DBC[CP.carFingerprint]["pt"], signals, checks, 0)
Esempio n. 4
0
    def get_can2_parser(CP):
        signals = []
        checks = []
        if CP.mdpsBus == 1:
            signals += [("CR_Mdps_StrColTq", "MDPS12", 0),
                        ("CF_Mdps_Def", "MDPS12", 0),
                        ("CF_Mdps_ToiActive", "MDPS12", 0),
                        ("CF_Mdps_ToiUnavail", "MDPS12", 0),
                        ("CF_Mdps_ToiFlt", "MDPS12", 0),
                        ("CF_Mdps_MsgCount2", "MDPS12", 0),
                        ("CF_Mdps_Chksum2", "MDPS12", 0),
                        ("CF_Mdps_SErr", "MDPS12", 0),
                        ("CR_Mdps_StrTq", "MDPS12", 0),
                        ("CF_Mdps_FailStat", "MDPS12", 0),
                        ("CR_Mdps_OutTq", "MDPS12", 0)]
            checks += [("MDPS12", 50)]

        if CP.sasBus == 1:
            signals += [
                ("SAS_Angle", "SAS11", 0),
                ("SAS_Speed", "SAS11", 0),
            ]
            checks += [("SAS11", 100)]
        if CP.sccBus == 1:
            signals += [
                ("MainMode_ACC", "SCC11", 1),
                ("SCCInfoDisplay", "SCC11", 0),
                ("AliveCounterACC", "SCC11", 0),
                ("VSetDis", "SCC11", 30),
                ("ObjValid", "SCC11", 0),
                ("DriverAlertDisplay", "SCC11", 0),
                ("TauGapSet", "SCC11", 4),
                ("ACC_ObjStatus", "SCC11", 0),
                ("ACC_ObjLatPos", "SCC11", 0),
                ("ACC_ObjDist", "SCC11", 150.),
                ("ACC_ObjRelSpd", "SCC11", 0),
                ("Navi_SCC_Curve_Status", "SCC11", 0),
                ("Navi_SCC_Curve_Act", "SCC11", 0),
                ("Navi_SCC_Camera_Act", "SCC11", 0),
                ("Navi_SCC_Camera_Status", "SCC11", 2),
                ("ACCMode", "SCC12", 0),
                ("CF_VSM_Prefill", "SCC12", 0),
                ("CF_VSM_DecCmdAct", "SCC12", 0),
                ("CF_VSM_HBACmd", "SCC12", 0),
                ("CF_VSM_Warn", "SCC12", 0),
                ("CF_VSM_Stat", "SCC12", 0),
                ("CF_VSM_BeltCmd", "SCC12", 0),
                ("ACCFailInfo", "SCC12", 0),
                ("StopReq", "SCC12", 0),
                ("CR_VSM_DecCmd", "SCC12", 0),
                ("aReqRaw", "SCC12", 0),  #aReqMax
                ("TakeOverReq", "SCC12", 0),
                ("PreFill", "SCC12", 0),
                ("aReqValue", "SCC12", 0),  #aReqMin
                ("CF_VSM_ConfMode", "SCC12", 1),
                ("AEB_Failinfo", "SCC12", 0),
                ("AEB_Status", "SCC12", 2),
                ("AEB_CmdAct", "SCC12", 0),
                ("AEB_StopReq", "SCC12", 0),
                ("CR_VSM_Alive", "SCC12", 0),
                ("CR_VSM_ChkSum", "SCC12", 0),
                ("SCCDrvModeRValue", "SCC13", 2),
                ("SCC_Equip", "SCC13", 1),
                ("AebDrvSetStatus", "SCC13", 0),
                ("JerkUpperLimit", "SCC14", 0),
                ("JerkLowerLimit", "SCC14", 0),
                ("SCCMode2", "SCC14", 0),
                ("ComfortBandUpper", "SCC14", 0),
                ("ComfortBandLower", "SCC14", 0),
            ]
            checks += [
                ("SCC11", 50),
                ("SCC12", 50),
            ]
        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 1)
Esempio n. 5
0
    def get_adas_can_parser(CP):
        # this function generates lists for signal, messages and initial values

        if CP.carFingerprint == CAR.ALTIMA:
            signals = [
                ("DESIRED_ANGLE", "LKAS", 0),
                ("SET_0x80_2", "LKAS", 0),
                ("MAX_TORQUE", "LKAS", 0),
                ("SET_0x80", "LKAS", 0),
                ("COUNTER", "LKAS", 0),
                ("LKA_ACTIVE", "LKAS", 0),
                ("CRUISE_ON", "PRO_PILOT", 0),
            ]
            checks = [
                ("PRO_PILOT", 100),
            ]
        else:
            signals = [
                # sig_name, sig_address, default
                ("LKAS_ENABLED", "LKAS_SETTINGS", 0),
                ("CRUISE_ENABLED", "CRUISE_STATE", 0),
                ("DESIRED_ANGLE", "LKAS", 0),
                ("SET_0x80_2", "LKAS", 0),
                ("MAX_TORQUE", "LKAS", 0),
                ("SET_0x80", "LKAS", 0),
                ("COUNTER", "LKAS", 0),
                ("LKA_ACTIVE", "LKAS", 0),

                # Below are the HUD messages. We copy the stock message and modify
                ("LARGE_WARNING_FLASHING", "PROPILOT_HUD", 0),
                ("SIDE_RADAR_ERROR_FLASHING1", "PROPILOT_HUD", 0),
                ("SIDE_RADAR_ERROR_FLASHING2", "PROPILOT_HUD", 0),
                ("LEAD_CAR", "PROPILOT_HUD", 0),
                ("LEAD_CAR_ERROR", "PROPILOT_HUD", 0),
                ("FRONT_RADAR_ERROR", "PROPILOT_HUD", 0),
                ("FRONT_RADAR_ERROR_FLASHING", "PROPILOT_HUD", 0),
                ("SIDE_RADAR_ERROR_FLASHING3", "PROPILOT_HUD", 0),
                ("LKAS_ERROR_FLASHING", "PROPILOT_HUD", 0),
                ("SAFETY_SHIELD_ACTIVE", "PROPILOT_HUD", 0),
                ("RIGHT_LANE_GREEN_FLASH", "PROPILOT_HUD", 0),
                ("LEFT_LANE_GREEN_FLASH", "PROPILOT_HUD", 0),
                ("FOLLOW_DISTANCE", "PROPILOT_HUD", 0),
                ("AUDIBLE_TONE", "PROPILOT_HUD", 0),
                ("SPEED_SET_ICON", "PROPILOT_HUD", 0),
                ("SMALL_STEERING_WHEEL_ICON", "PROPILOT_HUD", 0),
                ("unknown59", "PROPILOT_HUD", 0),
                ("unknown55", "PROPILOT_HUD", 0),
                ("unknown26", "PROPILOT_HUD", 0),
                ("unknown28", "PROPILOT_HUD", 0),
                ("unknown31", "PROPILOT_HUD", 0),
                ("SET_SPEED", "PROPILOT_HUD", 0),
                ("unknown43", "PROPILOT_HUD", 0),
                ("unknown08", "PROPILOT_HUD", 0),
                ("unknown05", "PROPILOT_HUD", 0),
                ("unknown02", "PROPILOT_HUD", 0),
                ("NA_HIGH_ACCEL_TEMP", "PROPILOT_HUD_INFO_MSG", 0),
                ("SIDE_RADAR_NA_HIGH_CABIN_TEMP", "PROPILOT_HUD_INFO_MSG", 0),
                ("SIDE_RADAR_MALFUNCTION", "PROPILOT_HUD_INFO_MSG", 0),
                ("LKAS_MALFUNCTION", "PROPILOT_HUD_INFO_MSG", 0),
                ("FRONT_RADAR_MALFUNCTION", "PROPILOT_HUD_INFO_MSG", 0),
                ("SIDE_RADAR_NA_CLEAN_REAR_CAMERA", "PROPILOT_HUD_INFO_MSG",
                 0),
                ("NA_POOR_ROAD_CONDITIONS", "PROPILOT_HUD_INFO_MSG", 0),
                ("CURRENTLY_UNAVAILABLE", "PROPILOT_HUD_INFO_MSG", 0),
                ("SAFETY_SHIELD_OFF", "PROPILOT_HUD_INFO_MSG", 0),
                ("FRONT_COLLISION_NA_FRONT_RADAR_OBSTRUCTION",
                 "PROPILOT_HUD_INFO_MSG", 0),
                ("PEDAL_MISSAPPLICATION_SYSTEM_ACTIVATED",
                 "PROPILOT_HUD_INFO_MSG", 0),
                ("SIDE_IMPACT_NA_RADAR_OBSTRUCTION", "PROPILOT_HUD_INFO_MSG",
                 0),
                ("WARNING_DO_NOT_ENTER", "PROPILOT_HUD_INFO_MSG", 0),
                ("SIDE_IMPACT_SYSTEM_OFF", "PROPILOT_HUD_INFO_MSG", 0),
                ("SIDE_IMPACT_MALFUNCTION", "PROPILOT_HUD_INFO_MSG", 0),
                ("FRONT_COLLISION_MALFUNCTION", "PROPILOT_HUD_INFO_MSG", 0),
                ("SIDE_RADAR_MALFUNCTION2", "PROPILOT_HUD_INFO_MSG", 0),
                ("LKAS_MALFUNCTION2", "PROPILOT_HUD_INFO_MSG", 0),
                ("FRONT_RADAR_MALFUNCTION2", "PROPILOT_HUD_INFO_MSG", 0),
                ("PROPILOT_NA_MSGS", "PROPILOT_HUD_INFO_MSG", 0),
                ("BOTTOM_MSG", "PROPILOT_HUD_INFO_MSG", 0),
                ("HANDS_ON_WHEEL_WARNING", "PROPILOT_HUD_INFO_MSG", 0),
                ("WARNING_STEP_ON_BRAKE_NOW", "PROPILOT_HUD_INFO_MSG", 0),
                ("PROPILOT_NA_FRONT_CAMERA_OBSTRUCTED",
                 "PROPILOT_HUD_INFO_MSG", 0),
                ("PROPILOT_NA_HIGH_CABIN_TEMP", "PROPILOT_HUD_INFO_MSG", 0),
                ("WARNING_PROPILOT_MALFUNCTION", "PROPILOT_HUD_INFO_MSG", 0),
                ("ACC_UNAVAILABLE_HIGH_CABIN_TEMP", "PROPILOT_HUD_INFO_MSG",
                 0),
                ("ACC_NA_FRONT_CAMERA_IMPARED", "PROPILOT_HUD_INFO_MSG", 0),
                ("unknown07", "PROPILOT_HUD_INFO_MSG", 0),
                ("unknown10", "PROPILOT_HUD_INFO_MSG", 0),
                ("unknown15", "PROPILOT_HUD_INFO_MSG", 0),
                ("unknown23", "PROPILOT_HUD_INFO_MSG", 0),
                ("unknown19", "PROPILOT_HUD_INFO_MSG", 0),
                ("unknown31", "PROPILOT_HUD_INFO_MSG", 0),
                ("unknown32", "PROPILOT_HUD_INFO_MSG", 0),
                ("unknown46", "PROPILOT_HUD_INFO_MSG", 0),
                ("unknown61", "PROPILOT_HUD_INFO_MSG", 0),
                ("unknown55", "PROPILOT_HUD_INFO_MSG", 0),
                ("unknown50", "PROPILOT_HUD_INFO_MSG", 0),
            ]

            checks = [
                ("CRUISE_STATE", 50),
            ]

        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 2)
Esempio n. 6
0
    def get_can_parser(CP):
        signals = [
            # sig_name, sig_address, default
            ("WHL_SPD_FL", "WHL_SPD11", 0),
            ("WHL_SPD_FR", "WHL_SPD11", 0),
            ("WHL_SPD_RL", "WHL_SPD11", 0),
            ("WHL_SPD_RR", "WHL_SPD11", 0),
            ("YAW_RATE", "ESP12", 0),
            ("CF_Gway_DrvSeatBeltInd", "CGW4", 1),
            ("CF_Gway_DrvSeatBeltSw", "CGW1", 0),
            ("CF_Gway_DrvDrSw", "CGW1", 0),  # Driver Door
            ("CF_Gway_AstDrSw", "CGW1", 0),  # Passenger door
            ("CF_Gway_RLDrSw", "CGW2", 0),  # Rear reft door
            ("CF_Gway_RRDrSw", "CGW2", 0),  # Rear right door
            ("CF_Gway_TurnSigLh", "CGW1", 0),
            ("CF_Gway_TurnSigRh", "CGW1", 0),
            ("CF_Gway_ParkBrakeSw", "CGW1", 0),
            ("CYL_PRES", "ESP12", 0),
            ("CF_Clu_CruiseSwState", "CLU11", 0),
            ("CF_Clu_CruiseSwMain", "CLU11", 0),
            ("CF_Clu_SldMainSW", "CLU11", 0),
            ("CF_Clu_ParityBit1", "CLU11", 0),
            ("CF_Clu_VanzDecimal", "CLU11", 0),
            ("CF_Clu_Vanz", "CLU11", 0),
            ("CF_Clu_SPEED_UNIT", "CLU11", 0),
            ("CF_Clu_DetentOut", "CLU11", 0),
            ("CF_Clu_RheostatLevel", "CLU11", 0),
            ("CF_Clu_CluInfo", "CLU11", 0),
            ("CF_Clu_AmpInfo", "CLU11", 0),
            ("CF_Clu_AliveCnt1", "CLU11", 0),
            ("ACCEnable", "TCS13", 0),
            ("ACC_REQ", "TCS13", 0),
            ("BrakeLight", "TCS13", 0),
            ("DriverBraking", "TCS13", 0),
            ("StandStill", "TCS13", 0),
            ("PBRAKE_ACT", "TCS13", 0),
            ("ESC_Off_Step", "TCS15", 0),
            ("AVH_LAMP", "TCS15", 0),
            ("CF_Lvr_GearInf", "LVR11",
             0),  # Transmission Gear (0 = N or P, 1-8 = Fwd, 14 = Rev)
            ("CR_Mdps_StrColTq", "MDPS12", 0),
            ("CF_Mdps_ToiActive", "MDPS12", 0),
            ("CF_Mdps_ToiUnavail", "MDPS12", 0),
            ("CF_Mdps_FailStat", "MDPS12", 0),
            ("CR_Mdps_OutTq", "MDPS12", 0),
            ("SAS_Angle", "SAS11", 0),
            ("SAS_Speed", "SAS11", 0),
            ("MainMode_ACC", "SCC11", 0),
            ("VSetDis", "SCC11", 0),
            ("SCCInfoDisplay", "SCC11", 0),
            ("ACC_ObjDist", "SCC11", 0),
            ("ACCMode", "SCC12", 1),
        ]

        checks = [
            # address, frequency
            ("MDPS12", 50),
            ("TCS13", 50),
            ("TCS15", 10),
            ("CLU11", 50),
            ("ESP12", 100),
            ("CGW1", 10),
            ("CGW4", 5),
            ("WHL_SPD11", 50),
            ("SAS11", 100),
        ]

        if not CP.openpilotLongitudinalControl:
            checks += [
                ("SCC11", 50),
                ("SCC12", 50),
            ]

        if CP.carFingerprint in FEATURES["use_bsm"]:
            signals += [
                ("CF_Lca_IndLeft", "LCA11", 0),
                ("CF_Lca_IndRight", "LCA11", 0),
            ]
            checks += [("LCA11", 50)]

        if CP.carFingerprint in EV_HYBRID:
            signals += [
                ("Accel_Pedal_Pos", "E_EMS11", 0),
            ]
            checks += [
                ("E_EMS11", 50),
            ]
        else:
            signals += [
                ("PV_AV_CAN", "EMS12", 0),
                ("CF_Ems_AclAct", "EMS16", 0),
            ]
            checks += [
                ("EMS12", 100),
                ("EMS16", 100),
            ]

        if CP.carFingerprint in FEATURES["use_cluster_gears"]:
            signals += [
                ("CF_Clu_InhibitD", "CLU15", 0),
                ("CF_Clu_InhibitP", "CLU15", 0),
                ("CF_Clu_InhibitN", "CLU15", 0),
                ("CF_Clu_InhibitR", "CLU15", 0),
            ]
            checks += [("CLU15", 5)]
        elif CP.carFingerprint in FEATURES["use_tcu_gears"]:
            signals += [("CUR_GR", "TCU12", 0)]
            checks += [("TCU12", 100)]
        elif CP.carFingerprint in FEATURES["use_elect_gears"]:
            signals += [("Elect_Gear_Shifter", "ELECT_GEAR", 0)]
            checks += [("ELECT_GEAR", 20)]
        else:
            signals += [("CF_Lvr_Gear", "LVR12", 0)]
            checks += [("LVR12", 100)]

        if CP.carFingerprint in FEATURES["use_fca"]:
            signals += [
                ("FCA_CmdAct", "FCA11", 0),
                ("CF_VSM_Warn", "FCA11", 0),
            ]
            if not CP.openpilotLongitudinalControl:
                checks += [("FCA11", 50)]
        else:
            signals += [
                ("AEB_CmdAct", "SCC12", 0),
                ("CF_VSM_Warn", "SCC12", 0),
            ]

        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 0)
Esempio n. 7
0
    def get_cam_can_parser(CP):

        if CP.carFingerprint in PREGLOBAL_CARS:
            signals = [
                ("Cruise_Set_Speed", "ES_DashStatus", 0),
                ("Not_Ready_Startup", "ES_DashStatus", 0),
                ("Car_Follow", "ES_DashStatus", 0),
                ("Cruise_Throttle", "ES_Distance", 0),
                ("Signal1", "ES_Distance", 0),
                ("Car_Follow", "ES_Distance", 0),
                ("Signal2", "ES_Distance", 0),
                ("Brake_On", "ES_Distance", 0),
                ("Distance_Swap", "ES_Distance", 0),
                ("Standstill", "ES_Distance", 0),
                ("Signal3", "ES_Distance", 0),
                ("Close_Distance", "ES_Distance", 0),
                ("Signal4", "ES_Distance", 0),
                ("Standstill_2", "ES_Distance", 0),
                ("Cruise_Fault", "ES_Distance", 0),
                ("Signal5", "ES_Distance", 0),
                ("Counter", "ES_Distance", 0),
                ("Signal6", "ES_Distance", 0),
                ("Cruise_Button", "ES_Distance", 0),
                ("Signal7", "ES_Distance", 0),
                ("LKAS_Command", "ES_LKAS", 0),
            ]

            checks = [
                ("ES_DashStatus", 20),
                ("ES_Distance", 20),
                ("ES_LKAS", 2),
            ]
        else:
            signals = [
                ("Counter", "ES_DashStatus", 0),
                ("PCB_Off", "ES_DashStatus", 0),
                ("LDW_Off", "ES_DashStatus", 0),
                ("Signal1", "ES_DashStatus", 0),
                ("Cruise_State_Msg", "ES_DashStatus", 0),
                ("LKAS_State_Msg", "ES_DashStatus", 0),
                ("Signal2", "ES_DashStatus", 0),
                ("Cruise_Soft_Disable", "ES_DashStatus", 0),
                ("EyeSight_Status_Msg", "ES_DashStatus", 0),
                ("Signal3", "ES_DashStatus", 0),
                ("Cruise_Distance", "ES_DashStatus", 0),
                ("Signal4", "ES_DashStatus", 0),
                ("Conventional_Cruise", "ES_DashStatus", 0),
                ("Signal5", "ES_DashStatus", 0),
                ("Cruise_Disengaged", "ES_DashStatus", 0),
                ("Cruise_Activated", "ES_DashStatus", 0),
                ("Signal6", "ES_DashStatus", 0),
                ("Cruise_Set_Speed", "ES_DashStatus", 0),
                ("Cruise_Fault", "ES_DashStatus", 0),
                ("Cruise_On", "ES_DashStatus", 0),
                ("Display_Own_Car", "ES_DashStatus", 0),
                ("Brake_Lights", "ES_DashStatus", 0),
                ("Car_Follow", "ES_DashStatus", 0),
                ("Signal7", "ES_DashStatus", 0),
                ("Far_Distance", "ES_DashStatus", 0),
                ("Cruise_State", "ES_DashStatus", 0),
                ("Counter", "ES_LKAS_State", 0),
                ("LKAS_Alert_Msg", "ES_LKAS_State", 0),
                ("Signal1", "ES_LKAS_State", 0),
                ("LKAS_ACTIVE", "ES_LKAS_State", 0),
                ("LKAS_Dash_State", "ES_LKAS_State", 0),
                ("Signal2", "ES_LKAS_State", 0),
                ("Backward_Speed_Limit_Menu", "ES_LKAS_State", 0),
                ("LKAS_Left_Line_Enable", "ES_LKAS_State", 0),
                ("LKAS_Left_Line_Light_Blink", "ES_LKAS_State", 0),
                ("LKAS_Right_Line_Enable", "ES_LKAS_State", 0),
                ("LKAS_Right_Line_Light_Blink", "ES_LKAS_State", 0),
                ("LKAS_Left_Line_Visible", "ES_LKAS_State", 0),
                ("LKAS_Right_Line_Visible", "ES_LKAS_State", 0),
                ("LKAS_Alert", "ES_LKAS_State", 0),
                ("Signal3", "ES_LKAS_State", 0),
                ("LKAS_Output", "ES_LKAS", 0),
            ]

            checks = [
                ("ES_DashStatus", 10),
                ("ES_LKAS_State", 10),
                ("ES_LKAS", 2),
            ]

            if CP.carFingerprint not in [CAR.CROSSTREK_2020H, CAR.OUTBACK]:
                signals += [
                    ("Counter", "ES_Distance", 0),
                    ("Signal1", "ES_Distance", 0),
                    ("Cruise_Fault", "ES_Distance", 0),
                    ("Cruise_Throttle", "ES_Distance", 0),
                    ("Signal2", "ES_Distance", 0),
                    ("Car_Follow", "ES_Distance", 0),
                    ("Signal3", "ES_Distance", 0),
                    ("Cruise_Brake_Active", "ES_Distance", 0),
                    ("Distance_Swap", "ES_Distance", 0),
                    ("Cruise_EPB", "ES_Distance", 0),
                    ("Signal4", "ES_Distance", 0),
                    ("Close_Distance", "ES_Distance", 0),
                    ("Signal5", "ES_Distance", 0),
                    ("Cruise_Cancel", "ES_Distance", 0),
                    ("Cruise_Set", "ES_Distance", 0),
                    ("Cruise_Resume", "ES_Distance", 0),
                    ("Signal6", "ES_Distance", 0),
                ]

                checks += [
                    ("ES_Distance", 20),
                ]

        return CANParser(DBC[CP.carFingerprint]["pt"], signals, checks, 2)
Esempio n. 8
0
    if CP.carFingerprint in TSS2_CAR:
      signals += [("L_ADJACENT", "BSM", 0)]
      signals += [("L_APPROACHING", "BSM", 0)]
      signals += [("R_ADJACENT", "BSM", 0)]
<<<<<<< HEAD
    
    logging.info("DBC.CP.carFingerprint.pt: %s", DBC[CP.carFingerprint]['pt'])
    logging.info("signals: %s", signals)
    logging.info("checks: %s", checks)
    
=======
      signals += [("R_APPROACHING", "BSM", 0)]

>>>>>>> a3d0c3b92112be5fdcc52d9675445f7f763f62eb
    return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 0)

  @staticmethod
  def get_cam_can_parser(CP):

<<<<<<< HEAD
    logging.info("CarState get_cam_can_parser")
    signals = [("FORCE", "PRE_COLLISION", 0), ("PRECOLLISION_ACTIVE", "PRE_COLLISION", 0)]
=======
    signals = [
      ("FORCE", "PRE_COLLISION", 0),
      ("PRECOLLISION_ACTIVE", "PRE_COLLISION", 0)
    ]
>>>>>>> a3d0c3b92112be5fdcc52d9675445f7f763f62eb

    # use steering message to check if panda is connected to frc
Esempio n. 9
0
    def get_can_parser(CP):

        signals = [
            # sig_name, sig_address, default
            ("STEER_ANGLE", "STEER_ANGLE_SENSOR", 0),
            ("GEAR", "GEAR_PACKET", 0),
            ("BRAKE_PRESSED", "BRAKE_MODULE", 0),
            ("GAS_PEDAL", "GAS_PEDAL", 0),
            ("WHEEL_SPEED_FL", "WHEEL_SPEEDS", 0),
            ("WHEEL_SPEED_FR", "WHEEL_SPEEDS", 0),
            ("WHEEL_SPEED_RL", "WHEEL_SPEEDS", 0),
            ("WHEEL_SPEED_RR", "WHEEL_SPEEDS", 0),
            ("DOOR_OPEN_FL", "SEATS_DOORS", 1),
            ("DOOR_OPEN_FR", "SEATS_DOORS", 1),
            ("DOOR_OPEN_RL", "SEATS_DOORS", 1),
            ("DOOR_OPEN_RR", "SEATS_DOORS", 1),
            ("SEATBELT_DRIVER_UNLATCHED", "SEATS_DOORS", 1),
            ("TC_DISABLED", "ESP_CONTROL", 1),
            ("STEER_FRACTION", "STEER_ANGLE_SENSOR", 0),
            ("STEER_RATE", "STEER_ANGLE_SENSOR", 0),
            ("CRUISE_ACTIVE", "PCM_CRUISE", 0),
            ("CRUISE_STATE", "PCM_CRUISE", 0),
            ("GAS_RELEASED", "PCM_CRUISE", 1),
            ("STEER_TORQUE_DRIVER", "STEER_TORQUE_SENSOR", 0),
            ("STEER_TORQUE_EPS", "STEER_TORQUE_SENSOR", 0),
            ("STEER_ANGLE", "STEER_TORQUE_SENSOR", 0),
            ("TURN_SIGNALS", "STEERING_LEVERS", 3),  # 3 is no blinkers
            ("LKA_STATE", "EPS_STATUS", 0),
            ("BRAKE_LIGHTS_ACC", "ESP_CONTROL", 0),
            ("AUTO_HIGH_BEAM", "LIGHT_STALK", 0),
        ]

        checks = [
            #("BRAKE_MODULE", 40),
            #("GAS_PEDAL", 33),
            ("WHEEL_SPEEDS", 80),
            ("STEER_ANGLE_SENSOR", 80),
            ("PCM_CRUISE", 33),
            ("STEER_TORQUE_SENSOR", 50),
            ("EPS_STATUS", 25),
        ]

        if CP.carFingerprint in [CAR.LEXUS_ISH, CAR.LEXUS_GSH]:
            signals.append(("GAS_PEDAL", "GAS_PEDAL_ALT", 0))
            signals.append(("MAIN_ON", "PCM_CRUISE_ALT", 0))
            signals.append(("SET_SPEED", "PCM_CRUISE_ALT", 0))
            signals.append(("AUTO_HIGH_BEAM", "LIGHT_STALK_ISH", 0))
            checks += [
                ("BRAKE_MODULE", 50),
                ("GAS_PEDAL_ALT", 50),
                ("PCM_CRUISE_ALT", 1),
            ]
        else:
            signals += [
                ("AUTO_HIGH_BEAM", "LIGHT_STALK", 0),
                ("GAS_PEDAL", "GAS_PEDAL", 0),
            ]
            checks += [
                ("BRAKE_MODULE", 40),
                ("GAS_PEDAL", 33),
            ]

        if CP.carFingerprint in [CAR.LEXUS_IS, CAR.LEXUS_NXT]:
            signals.append(("MAIN_ON", "DSU_CRUISE", 0))
            signals.append(("SET_SPEED", "DSU_CRUISE", 0))
            checks.append(("DSU_CRUISE", 5))
        else:
            signals.append(("MAIN_ON", "PCM_CRUISE_2", 0))
            signals.append(("SET_SPEED", "PCM_CRUISE_2", 0))
            signals.append(("LOW_SPEED_LOCKOUT", "PCM_CRUISE_2", 0))
            checks.append(("PCM_CRUISE_2", 33))

        if CP.carFingerprint == CAR.PRIUS:
            signals += [("STATE", "AUTOPARK_STATUS", 0)]

        # add gas interceptor reading if we are using it
        if CP.enableGasInterceptor:
            signals.append(("INTERCEPTOR_GAS", "GAS_SENSOR", 0))
            signals.append(("INTERCEPTOR_GAS2", "GAS_SENSOR", 0))
            checks.append(("GAS_SENSOR", 50))

        if CP.carFingerprint in TSS2_CAR:
            signals += [("L_ADJACENT", "BSM", 0)]
            signals += [("L_APPROACHING", "BSM", 0)]
            signals += [("R_ADJACENT", "BSM", 0)]
            signals += [("R_APPROACHING", "BSM", 0)]

        if Params().get('dp_toyota_zss') == b'1':
            signals += [("ZORRO_STEER", "SECONDARY_STEER_ANGLE", 0)]

        checks = []

        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 0)
Esempio n. 10
0
    def get_can_parser(CP):
        # this function generates lists for signal, messages and initial values
        signals = [
            # sig_name, sig_address, default
            ("LWI_Lenkradwinkel", "LWI_01", 0),  # Absolute steering angle
            ("LWI_VZ_Lenkradwinkel", "LWI_01", 0),  # Steering angle sign
            ("LWI_Lenkradw_Geschw", "LWI_01", 0),  # Absolute steering rate
            ("LWI_VZ_Lenkradw_Geschw", "LWI_01", 0),  # Steering rate sign
            ("ESP_VL_Radgeschw_02", "ESP_19",
             0),  # ABS wheel speed, front left
            ("ESP_VR_Radgeschw_02", "ESP_19",
             0),  # ABS wheel speed, front right
            ("ESP_HL_Radgeschw_02", "ESP_19", 0),  # ABS wheel speed, rear left
            ("ESP_HR_Radgeschw_02", "ESP_19",
             0),  # ABS wheel speed, rear right
            ("ESP_Gierrate", "ESP_02", 0),  # Absolute yaw rate
            ("ESP_VZ_Gierrate", "ESP_02", 0),  # Yaw rate sign
            ("ZV_FT_offen", "Gateway_72", 0),  # Door open, driver
            ("ZV_BT_offen", "Gateway_72", 0),  # Door open, passenger
            ("ZV_HFS_offen", "Gateway_72", 0),  # Door open, rear left
            ("ZV_HBFS_offen", "Gateway_72", 0),  # Door open, rear right
            ("ZV_HD_offen", "Gateway_72", 0),  # Trunk or hatch open
            ("BH_Blinker_li", "Gateway_72", 0),  # Left turn signal on
            ("BH_Blinker_re", "Gateway_72", 0),  # Right turn signal on
            ("GE_Fahrstufe", "Getriebe_11",
             0),  # Auto trans gear selector position
            ("AB_Gurtschloss_FA", "Airbag_02", 0),  # Seatbelt status, driver
            ("AB_Gurtschloss_BF", "Airbag_02",
             0),  # Seatbelt status, passenger
            ("ESP_Fahrer_bremst", "ESP_05", 0),  # Brake pedal pressed
            ("ESP_Status_Bremsdruck", "ESP_05", 0),  # Brakes applied
            ("ESP_Bremsdruck", "ESP_05", 0),  # Brake pressure applied
            ("MO_Fahrpedalrohwert_01", "Motor_20",
             0),  # Accelerator pedal value
            ("MO_Kuppl_schalter", "Motor_14", 0),  # Clutch switch
            ("Driver_Strain", "EPS_01", 0),  # Absolute driver torque input
            ("Driver_Strain_VZ", "EPS_01", 0),  # Driver torque input sign
            ("HCA_Ready", "EPS_01", 0),  # Steering rack HCA support configured
            ("ESP_Tastung_passiv", "ESP_21", 0),  # Stability control disabled
            ("KBI_MFA_v_Einheit_02", "Einheiten_01",
             0),  # MPH vs KMH speed display
            ("KBI_Handbremse", "Kombi_01", 0),  # Manual handbrake applied
            ("TSK_Status", "TSK_06",
             0),  # ACC engagement status from drivetrain coordinator
            ("TSK_Fahrzeugmasse_02", "Motor_16",
             0),  # Estimated vehicle mass from drivetrain coordinator
            ("ACC_Status_ACC", "ACC_06", 0),  # ACC engagement status
            ("ACC_Typ", "ACC_06", 0),  # ACC type (follow to stop, stop&go)
            ("SetSpeed", "ACC_02", 0),  # ACC set speed
            ("GRA_Hauptschalter", "GRA_ACC_01", 0),  # ACC button, on/off
            ("GRA_Abbrechen", "GRA_ACC_01", 0),  # ACC button, cancel
            ("GRA_Tip_Setzen", "GRA_ACC_01", 0),  # ACC button, set
            ("GRA_Tip_Hoch", "GRA_ACC_01", 0),  # ACC button, increase or accel
            ("GRA_Tip_Runter", "GRA_ACC_01",
             0),  # ACC button, decrease or decel
            ("GRA_Tip_Wiederaufnahme", "GRA_ACC_01", 0),  # ACC button, resume
            ("GRA_Verstellung_Zeitluecke", "GRA_ACC_01",
             0),  # ACC button, time gap adj
            ("GRA_Typ_Hauptschalter", "GRA_ACC_01", 0),  # ACC main button type
            ("GRA_Tip_Stufe_2", "GRA_ACC_01",
             0),  # unknown related to stalk type
            ("GRA_ButtonTypeInfo", "GRA_ACC_01",
             0),  # unknown related to stalk type
            ("COUNTER", "GRA_ACC_01", 0),  # GRA_ACC_01 CAN message counter
        ]

        checks = [
            # sig_address, frequency
            ("LWI_01", 100
             ),  # From J500 Steering Assist with integrated sensors
            ("EPS_01",
             100),  # From J500 Steering Assist with integrated sensors
            ("ESP_19", 100),  # From J104 ABS/ESP controller
            ("ESP_05", 50),  # From J104 ABS/ESP controller
            ("ESP_21", 50),  # From J104 ABS/ESP controller
            ("ACC_06", 50),  # From J428 ACC radar control module
            ("Motor_20", 50),  # From J623 Engine control module
            ("TSK_06", 50),  # From J623 Engine control module
            ("GRA_ACC_01", 33),  # From J??? steering wheel control buttons
            ("ACC_02", 17),  # From J428 ACC radar control module
            ("Getriebe_11", 20),  # From J743 Auto transmission control module
            ("Gateway_72", 10),  # From J533 CAN gateway (aggregated data)
            ("Motor_14", 10),  # From J623 Engine control module
            ("Airbag_02", 5),  # From J234 Airbag control module
            ("Kombi_01", 2),  # From J285 Instrument cluster
            ("Motor_16", 2),  # From J623 Engine control module
            ("Einheiten_01",
             1),  # From J??? not known if gateway, cluster, or BCM
        ]

        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks,
                         CANBUS.pt)
Esempio n. 11
0
    def get_can_parser(CP):
        signals = [
            # sig_name, sig_address
            ("LWI_Lenkradwinkel", "LWI_01"),  # Absolute steering angle
            ("LWI_VZ_Lenkradwinkel", "LWI_01"),  # Steering angle sign
            ("LWI_Lenkradw_Geschw", "LWI_01"),  # Absolute steering rate
            ("LWI_VZ_Lenkradw_Geschw", "LWI_01"),  # Steering rate sign
            ("ESP_VL_Radgeschw_02", "ESP_19"),  # ABS wheel speed, front left
            ("ESP_VR_Radgeschw_02", "ESP_19"),  # ABS wheel speed, front right
            ("ESP_HL_Radgeschw_02", "ESP_19"),  # ABS wheel speed, rear left
            ("ESP_HR_Radgeschw_02", "ESP_19"),  # ABS wheel speed, rear right
            ("ESP_Gierrate", "ESP_02"),  # Absolute yaw rate
            ("ESP_VZ_Gierrate", "ESP_02"),  # Yaw rate sign
            ("ZV_FT_offen", "Gateway_72"),  # Door open, driver
            ("ZV_BT_offen", "Gateway_72"),  # Door open, passenger
            ("ZV_HFS_offen", "Gateway_72"),  # Door open, rear left
            ("ZV_HBFS_offen", "Gateway_72"),  # Door open, rear right
            ("ZV_HD_offen", "Gateway_72"),  # Trunk or hatch open
            ("Comfort_Signal_Left", "Blinkmodi_02"
             ),  # Left turn signal including comfort blink interval
            ("Comfort_Signal_Right", "Blinkmodi_02"
             ),  # Right turn signal including comfort blink interval
            ("AB_Gurtschloss_FA", "Airbag_02"),  # Seatbelt status, driver
            ("AB_Gurtschloss_BF", "Airbag_02"),  # Seatbelt status, passenger
            ("ESP_Fahrer_bremst", "ESP_05"),  # Brake pedal pressed
            ("ESP_Bremsdruck", "ESP_05"),  # Brake pressure applied
            ("MO_Fahrpedalrohwert_01", "Motor_20"),  # Accelerator pedal value
            ("EPS_Lenkmoment", "LH_EPS_03"),  # Absolute driver torque input
            ("EPS_VZ_Lenkmoment", "LH_EPS_03"),  # Driver torque input sign
            ("EPS_HCA_Status", "LH_EPS_03"),  # EPS HCA control status
            ("ESP_Tastung_passiv", "ESP_21"),  # Stability control disabled
            ("ESP_Haltebestaetigung", "ESP_21"),  # ESP hold confirmation
            ("KBI_Handbremse", "Kombi_01"),  # Manual handbrake applied
            ("TSK_Status",
             "TSK_06"),  # ACC engagement status from drivetrain coordinator
            ("GRA_Hauptschalter", "GRA_ACC_01"),  # ACC button, on/off
            ("GRA_Abbrechen", "GRA_ACC_01"),  # ACC button, cancel
            ("GRA_Tip_Setzen", "GRA_ACC_01"),  # ACC button, set
            ("GRA_Tip_Hoch", "GRA_ACC_01"),  # ACC button, increase or accel
            ("GRA_Tip_Runter", "GRA_ACC_01"),  # ACC button, decrease or decel
            ("GRA_Tip_Wiederaufnahme", "GRA_ACC_01"),  # ACC button, resume
            ("GRA_Verstellung_Zeitluecke",
             "GRA_ACC_01"),  # ACC button, time gap adj
            ("GRA_Typ_Hauptschalter", "GRA_ACC_01"),  # ACC main button type
            ("GRA_Tip_Stufe_2", "GRA_ACC_01"),  # unknown related to stalk type
            ("GRA_ButtonTypeInfo",
             "GRA_ACC_01"),  # unknown related to stalk type
            ("COUNTER", "GRA_ACC_01"),  # GRA_ACC_01 CAN message counter
        ]

        checks = [
            # sig_address, frequency
            ("LWI_01", 100
             ),  # From J500 Steering Assist with integrated sensors
            ("LH_EPS_03",
             100),  # From J500 Steering Assist with integrated sensors
            ("ESP_19", 100),  # From J104 ABS/ESP controller
            ("ESP_05", 50),  # From J104 ABS/ESP controller
            ("ESP_21", 50),  # From J104 ABS/ESP controller
            ("Motor_20", 50),  # From J623 Engine control module
            ("TSK_06", 50),  # From J623 Engine control module
            ("ESP_02", 50),  # From J104 ABS/ESP controller
            ("GRA_ACC_01", 33
             ),  # From J533 CAN gateway (via LIN from steering wheel controls)
            ("Gateway_72", 10),  # From J533 CAN gateway (aggregated data)
            ("Airbag_02", 5),  # From J234 Airbag control module
            ("Kombi_01", 2),  # From J285 Instrument cluster
            (
                "Blinkmodi_02", 1
            ),  # From J519 BCM (sent at 1Hz when no lights active, 50Hz when active)
        ]

        if CP.transmissionType == TransmissionType.automatic:
            signals.append(
                ("GE_Fahrstufe",
                 "Getriebe_11"))  # Auto trans gear selector position
            checks.append(("Getriebe_11",
                           20))  # From J743 Auto transmission control module
        elif CP.transmissionType == TransmissionType.direct:
            signals.append(
                ("GearPosition", "EV_Gearshift"))  # EV gear selector position
            checks.append(
                ("EV_Gearshift", 10))  # From J??? unknown EV control module
        elif CP.transmissionType == TransmissionType.manual:
            signals += [
                ("MO_Kuppl_schalter", "Motor_14"),  # Clutch switch
                ("BCM1_Rueckfahrlicht_Schalter", "Gateway_72")
            ]  # Reverse light from BCM
            checks.append(("Motor_14", 10))  # From J623 Engine control module

        if CP.networkLocation == NetworkLocation.fwdCamera:
            # Radars are here on CANBUS.pt
            signals += MqbExtraSignals.fwd_radar_signals
            checks += MqbExtraSignals.fwd_radar_checks
            if CP.enableBsm:
                signals += MqbExtraSignals.bsm_radar_signals
                checks += MqbExtraSignals.bsm_radar_checks

        return CANParser(DBC_FILES.mqb, signals, checks, CANBUS.pt)
Esempio n. 12
0
    def get_can_parser(CP):
        signals = [
            # sig_name, sig_address, default
            ("WHL_SPD_FL", "WHL_SPD11", 0),
            ("WHL_SPD_FR", "WHL_SPD11", 0),
            ("WHL_SPD_RL", "WHL_SPD11", 0),
            ("WHL_SPD_RR", "WHL_SPD11", 0),
            ("YAW_RATE", "ESP12", 0),
            ("CF_Gway_DrvSeatBeltInd", "CGW4", 1),
            ("CF_Gway_DrvSeatBeltSw", "CGW1", 0),
            ("CF_Gway_DrvDrSw", "CGW1", 0),  # Driver Door
            ("CF_Gway_AstDrSw", "CGW1", 0),  # Passenger door
            ("CF_Gway_RLDrSw", "CGW2", 0),  # Rear reft door
            ("CF_Gway_RRDrSw", "CGW2", 0),  # Rear right door
            ("CF_Gway_TSigLHSw", "CGW1", 0),
            ("CF_Gway_TurnSigLh", "CGW1", 0),
            ("CF_Gway_TSigRHSw", "CGW1", 0),
            ("CF_Gway_TurnSigRh", "CGW1", 0),
            ("CF_Gway_ParkBrakeSw", "CGW1", 0),
            ("CYL_PRES", "ESP12", 0),
            ("CF_Clu_CruiseSwState", "CLU11", 0),
            ("CF_Clu_CruiseSwMain", "CLU11", 0),
            ("CF_Clu_SldMainSW", "CLU11", 0),
            ("CF_Clu_ParityBit1", "CLU11", 0),
            ("CF_Clu_VanzDecimal", "CLU11", 0),
            ("CF_Clu_Vanz", "CLU11", 0),
            ("CF_Clu_SPEED_UNIT", "CLU11", 0),
            ("CF_Clu_DetentOut", "CLU11", 0),
            ("CF_Clu_RheostatLevel", "CLU11", 0),
            ("CF_Clu_CluInfo", "CLU11", 0),
            ("CF_Clu_AmpInfo", "CLU11", 0),
            ("CF_Clu_AliveCnt1", "CLU11", 0),
            ("ACCEnable", "TCS13", 0),
            ("BrakeLight", "TCS13", 0),
            ("DriverBraking", "TCS13", 0),
            ("ESC_Off_Step", "TCS15", 0),
            ("CF_Lvr_GearInf", "LVR11",
             0),  # Transmission Gear (0 = N or P, 1-8 = Fwd, 14 = Rev)
            ("CR_Mdps_StrColTq", "MDPS12", 0),
            ("CF_Mdps_ToiActive", "MDPS12", 0),
            ("CF_Mdps_ToiUnavail", "MDPS12", 0),
            ("CF_Mdps_FailStat", "MDPS12", 0),
            ("CR_Mdps_OutTq", "MDPS12", 0),
            ("SAS_Angle", "SAS11", 0),
            ("SAS_Speed", "SAS11", 0),
            ("PV_AV_CAN", "EMS12", 0),
            ("CF_Ems_AclAct", "EMS16", 0),
        ]

        checks = [
            # address, frequency
            ("MDPS12", 50),
            ("TCS13", 50),
            ("TCS15", 10),
            ("CLU11", 50),
            ("ESP12", 100),
            ("CGW1", 10),
            ("CGW4", 5),
            ("WHL_SPD11", 50),
            ("SAS11", 100),
            ("EMS12", 100),
            ("EMS16", 100),
        ]

        signals += [
            ("CRUISE_LAMP_M", "EMS16", 0),
            ("CF_Lvr_CruiseSet", "LVR12", 0),
            # ("Vision_ObjDist_Low","V_OptData_739", 0),
        ]

        if CP.carFingerprint in FEATURES["use_cluster_gears"]:
            signals += [
                ("CF_Clu_InhibitD", "CLU15", 0),
                ("CF_Clu_InhibitP", "CLU15", 0),
                ("CF_Clu_InhibitN", "CLU15", 0),
                ("CF_Clu_InhibitR", "CLU15", 0),
            ]
            checks += [("CLU15", 5)]
        elif CP.carFingerprint in FEATURES["use_tcu_gears"]:
            signals += [("CUR_GR", "TCU12", 0)]
            checks += [("TCU12", 100)]
        elif CP.carFingerprint in FEATURES["use_elect_gears"]:
            signals += [("Elect_Gear_Shifter", "ELECT_GEAR", 0)]
            checks += [("ELECT_GEAR", 20)]
        else:
            signals += [("CF_Lvr_Gear", "LVR12", 0)]
            checks += [("LVR12", 100)]

        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 0)
  def test_honda_brake(self):
    self.longMessage = True

    sendcan = messaging.pub_sock('sendcan')

    car_name = HONDA.CIVIC

    params = CarInterface.get_params(car_name)
    CI = CarInterface(params, CarController)

    # Get parser
    parser_signals = [
      ('COMPUTER_BRAKE', 'BRAKE_COMMAND', 0),
      ('BRAKE_PUMP_REQUEST', 'BRAKE_COMMAND', 0),  # pump_on
      ('CRUISE_OVERRIDE', 'BRAKE_COMMAND', 0),  # pcm_override
      ('CRUISE_FAULT_CMD', 'BRAKE_COMMAND', 0),  # pcm_fault_cmd
      ('CRUISE_CANCEL_CMD', 'BRAKE_COMMAND', 0),  # pcm_cancel_cmd
      ('COMPUTER_BRAKE_REQUEST', 'BRAKE_COMMAND', 0),  # brake_rq
      ('SET_ME_0X80', 'BRAKE_COMMAND', 0),
      ('BRAKE_LIGHTS', 'BRAKE_COMMAND', 0),  # brakelights
      ('FCW', 'BRAKE_COMMAND', 0),
    ]
    parser = CANParser(CI.cp.dbc_name, parser_signals, [], 0, sendcan=True, tcp_addr="127.0.0.1")
    time.sleep(0.2)  # Slow joiner syndrome

    VA = car.CarControl.HUDControl.VisualAlert

    for override in [True, False]:
      for cancel in [True, False]:
        for fcw in [True, False]:
          steps = 25 if not override and not cancel else 2
          for brake in np.linspace(0., 0.95, steps):
            control = car.CarControl.new_message()

            hud = car.CarControl.HUDControl.new_message()
            if fcw:
              hud.visualAlert = VA.fcw

            cruise = car.CarControl.CruiseControl.new_message()
            cruise.cancel = cancel
            cruise.override = override

            actuators = car.CarControl.Actuators.new_message()
            actuators.brake = float(brake)

            control.enabled = True
            control.actuators = actuators
            control.hudControl = hud
            control.cruiseControl = cruise

            CI.update(control)

            CI.CS.steer_not_allowed = False

            for _ in range(20):
              can_sends = CI.apply(control)
              sendcan.send(can_list_to_can_capnp(can_sends, msgtype='sendcan'))

            for _ in range(5):
              parser.update(int(sec_since_boot() * 1e9), False)
              time.sleep(0.01)

            brake_command = parser.vl['BRAKE_COMMAND']['COMPUTER_BRAKE']
            min_expected_brake = int(1024 / 4 * (actuators.brake - 0.02))
            max_expected_brake = int(1024 / 4 * (actuators.brake + 0.02))
            braking = actuators.brake > 0

            braking_ok = min_expected_brake <= brake_command <= max_expected_brake
            if steps == 2:
              braking_ok = True

            self.assertTrue(braking_ok, msg="Car: %s, brake %.2f" % (car_name, brake))
            self.assertEqual(0x80, parser.vl['BRAKE_COMMAND']['SET_ME_0X80'])
            self.assertEqual(braking, parser.vl['BRAKE_COMMAND']['BRAKE_PUMP_REQUEST'])
            self.assertEqual(braking, parser.vl['BRAKE_COMMAND']['COMPUTER_BRAKE_REQUEST'])
            self.assertEqual(braking, parser.vl['BRAKE_COMMAND']['BRAKE_LIGHTS'])
            self.assertFalse(parser.vl['BRAKE_COMMAND']['CRUISE_FAULT_CMD'])
            self.assertEqual(override, parser.vl['BRAKE_COMMAND']['CRUISE_OVERRIDE'])
            self.assertEqual(cancel, parser.vl['BRAKE_COMMAND']['CRUISE_CANCEL_CMD'])
            self.assertEqual(fcw, bool(parser.vl['BRAKE_COMMAND']['FCW']))
  def test_honda_lkas_hud(self):
    self.longMessage = True

    sendcan = messaging.pub_sock('sendcan')

    car_name = HONDA.CIVIC
    params = CarInterface.get_params(car_name)
    CI = CarInterface(params, CarController)

    # Get parser
    parser_signals = [
      ('SET_ME_X41', 'LKAS_HUD', 0),
      ('SET_ME_X48', 'LKAS_HUD', 0),
      ('STEERING_REQUIRED', 'LKAS_HUD', 0),
      ('SOLID_LANES', 'LKAS_HUD', 0),
      ('LEAD_SPEED', 'RADAR_HUD', 0),
      ('LEAD_STATE', 'RADAR_HUD', 0),
      ('LEAD_DISTANCE', 'RADAR_HUD', 0),
      ('ACC_ALERTS', 'RADAR_HUD', 0),
    ]

    VA = car.CarControl.HUDControl.VisualAlert

    parser = CANParser(CI.cp.dbc_name, parser_signals, [], 0, sendcan=True, tcp_addr="127.0.0.1")
    time.sleep(0.2)  # Slow joiner syndrome


    alerts = {
      VA.none: 0,
      VA.brakePressed: 10,
      VA.wrongGear: 6,
      VA.seatbeltUnbuckled: 5,
      VA.speedTooHigh: 8,
    }

    for steer_required in [True, False]:
      for lanes in [True, False]:
        for alert in alerts.keys():
          control = car.CarControl.new_message()
          hud = car.CarControl.HUDControl.new_message()

          control.enabled = True

          if steer_required:
            hud.visualAlert = VA.steerRequired
          else:
            hud.visualAlert = alert

          hud.lanesVisible = lanes
          control.hudControl = hud

          CI.update(control)

          for _ in range(25):
            can_sends = CI.apply(control)
            sendcan.send(can_list_to_can_capnp(can_sends, msgtype='sendcan'))

          for _ in range(5):
            parser.update(int(sec_since_boot() * 1e9), False)
            time.sleep(0.01)

          self.assertEqual(0x41, parser.vl['LKAS_HUD']['SET_ME_X41'])
          self.assertEqual(0x48, parser.vl['LKAS_HUD']['SET_ME_X48'])
          self.assertEqual(steer_required, parser.vl['LKAS_HUD']['STEERING_REQUIRED'])
          self.assertEqual(lanes, parser.vl['LKAS_HUD']['SOLID_LANES'])

          self.assertEqual(0x1fe, parser.vl['RADAR_HUD']['LEAD_SPEED'])
          self.assertEqual(0x7, parser.vl['RADAR_HUD']['LEAD_STATE'])
          self.assertEqual(0x1e, parser.vl['RADAR_HUD']['LEAD_DISTANCE'])
          self.assertEqual(alerts[alert] if not steer_required else 0, parser.vl['RADAR_HUD']['ACC_ALERTS'])
Esempio n. 15
0
    def get_mqb_can_parser(CP):
        # this function generates lists for signal, messages and initial values
        signals = [
            # sig_name, sig_address, default
            ("EPS_Berechneter_LW", "LH_EPS_03", 0),  # Absolute steering angle
            ("EPS_VZ_BLW", "LH_EPS_03", 0),  # Steering angle sign
            ("LWI_Lenkradw_Geschw", "LWI_01", 0),  # Absolute steering rate
            ("LWI_VZ_Lenkradw_Geschw", "LWI_01", 0),  # Steering rate sign
            ("ESP_VL_Radgeschw_02", "ESP_19",
             0),  # ABS wheel speed, front left
            ("ESP_VR_Radgeschw_02", "ESP_19",
             0),  # ABS wheel speed, front right
            ("ESP_HL_Radgeschw_02", "ESP_19", 0),  # ABS wheel speed, rear left
            ("ESP_HR_Radgeschw_02", "ESP_19",
             0),  # ABS wheel speed, rear right
            ("ESP_Gierrate", "ESP_02", 0),  # Absolute yaw rate
            ("ESP_VZ_Gierrate", "ESP_02", 0),  # Yaw rate sign
            ("ZV_FT_offen", "Gateway_72", 0),  # Door open, driver
            ("ZV_BT_offen", "Gateway_72", 0),  # Door open, passenger
            ("ZV_HFS_offen", "Gateway_72", 0),  # Door open, rear left
            ("ZV_HBFS_offen", "Gateway_72", 0),  # Door open, rear right
            ("ZV_HD_offen", "Gateway_72", 0),  # Trunk or hatch open
            ("BH_Blinker_li", "Gateway_72", 0),  # Left turn signal on
            ("BH_Blinker_re", "Gateway_72", 0),  # Right turn signal on
            ("AB_Gurtschloss_FA", "Airbag_02", 0),  # Seatbelt status, driver
            ("AB_Gurtschloss_BF", "Airbag_02",
             0),  # Seatbelt status, passenger
            ("ESP_Fahrer_bremst", "ESP_05", 0),  # Brake pedal pressed
            ("ESP_Status_Bremsdruck", "ESP_05", 0),  # Brakes applied
            ("ESP_Bremsdruck", "ESP_05", 0),  # Brake pressure applied
            ("MO_Fahrpedalrohwert_01", "Motor_20",
             0),  # Accelerator pedal value
            ("EPS_Lenkmoment", "LH_EPS_03", 0),  # Absolute driver torque input
            ("EPS_VZ_Lenkmoment", "LH_EPS_03", 0),  # Driver torque input sign
            ("EPS_HCA_Status", "LH_EPS_03",
             0),  # Steering rack ready to process HCA commands
            ("ESP_Tastung_passiv", "ESP_21", 0),  # Stability control disabled
            ("KBI_MFA_v_Einheit_02", "Einheiten_01",
             0),  # MPH vs KMH speed display
            ("KBI_Handbremse", "Kombi_01", 0),  # Manual handbrake applied
            ("TSK_Status", "TSK_06",
             0),  # ACC engagement status from drivetrain coordinator
            ("GRA_Hauptschalter", "GRA_ACC_01", 0),  # ACC button, on/off
            ("GRA_Abbrechen", "GRA_ACC_01", 0),  # ACC button, cancel
            ("GRA_Tip_Setzen", "GRA_ACC_01", 0),  # ACC button, set
            ("GRA_Tip_Hoch", "GRA_ACC_01", 0),  # ACC button, increase or accel
            ("GRA_Tip_Runter", "GRA_ACC_01",
             0),  # ACC button, decrease or decel
            ("GRA_Tip_Wiederaufnahme", "GRA_ACC_01", 0),  # ACC button, resume
            ("GRA_Verstellung_Zeitluecke", "GRA_ACC_01",
             0),  # ACC button, time gap adj
            ("GRA_Typ_Hauptschalter", "GRA_ACC_01", 0),  # ACC main button type
            ("GRA_Tip_Stufe_2", "GRA_ACC_01",
             0),  # unknown related to stalk type
            ("GRA_Typ468", "GRA_ACC_01",
             0),  # Set/Resume button behavior as overloaded coast/accel??
            ("GRA_ButtonTypeInfo", "GRA_ACC_01",
             0),  # unknown related to stalk type
            ("COUNTER", "GRA_ACC_01", 0),  # GRA_ACC_01 CAN message counter
        ]

        checks = [
            # sig_address, frequency
            ("LWI_01", 100
             ),  # From J500 Steering Assist with integrated sensors
            ("LH_EPS_03",
             100),  # From J500 Steering Assist with integrated sensors
            ("ESP_19", 100),  # From J104 ABS/ESP controller
            ("ESP_05", 50),  # From J104 ABS/ESP controller
            ("ESP_21", 50),  # From J104 ABS/ESP controller
            ("Motor_20", 50),  # From J623 Engine control module
            ("TSK_06", 50),  # From J623 Engine control module
            ("GRA_ACC_01", 33),  # From J??? steering wheel control buttons
            ("Gateway_72", 10),  # From J533 CAN gateway (aggregated data)
            ("Airbag_02", 5),  # From J234 Airbag control module
            ("Kombi_01", 2),  # From J285 Instrument cluster
            ("Einheiten_01",
             1),  # From J??? not known if gateway, cluster, or BCM
        ]

        if CP.transmissionType == TRANS.automatic:
            signals += [("GE_Fahrstufe", "Getriebe_11", 0)
                        ]  # Auto trans gear selector position
            checks += [("Getriebe_11", 20)
                       ]  # From J743 Auto transmission control module
        elif CP.transmissionType == TRANS.direct:
            signals += [("GearPosition", "EV_Gearshift", 0)
                        ]  # EV gear selector position
            checks += [("EV_Gearshift", 10)
                       ]  # From J??? unknown EV control module
        elif CP.transmissionType == TRANS.manual:
            signals += [
                ("MO_Kuppl_schalter", "Motor_14", 0),  # Clutch switch
                ("BCM1_Rueckfahrlicht_Schalter", "Gateway_72", 0)
            ]  # Reverse light from BCM
            checks += [("Motor_14", 10)]  # From J623 Engine control module

        if CP.networkLocation == NWL.fwdCamera:
            # Extended CAN devices other than the camera are here on CANBUS.pt
            # FIXME: gate SWA_01 checks on module being detected, and reduce duplicate network location code
            signals += [
                ("AWV2_Priowarnung", "ACC_10", 0),  # FCW related
                ("AWV2_Freigabe", "ACC_10", 0),  # FCW related
                ("ANB_Teilbremsung_Freigabe", "ACC_10", 0),  # AEB related
                ("ANB_Zielbremsung_Freigabe", "ACC_10", 0),  # AEB related
                ("SWA_Infostufe_SWA_li", "SWA_01",
                 0),  # Blindspot object info, left
                ("SWA_Warnung_SWA_li", "SWA_01",
                 0),  # Blindspot object warning, left
                ("SWA_Infostufe_SWA_re", "SWA_01",
                 0),  # Blindspot object info, right
                ("SWA_Warnung_SWA_re", "SWA_01",
                 0),  # Blindspot object warning, right
                ("ACC_Wunschgeschw", "ACC_02", 0)
            ]  # ACC set speed
            checks += [
                ("ACC_10", 50),  # From J428 ACC radar control module
                # FIXME: SWA_01 should be checked when we have better detection of installed hardware
                #("SWA_01", 20),  # From J1086 Lane Change Assist module
                ("ACC_02", 17)
            ]  # From J428 ACC radar control module

        checks = []
        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks,
                         CANBUS.pt)
Esempio n. 16
0
    def get_can_parser(CP):

        signals = [
            # sig_name, sig_address, default
            ("STEER_ANGLE", "STEER_ANGLE_SENSOR", 0),
            ("GEAR", "GEAR_PACKET", 0),
            ("BRAKE_PRESSED", "BRAKE_MODULE", 0),
            ("GAS_PEDAL", "GAS_PEDAL", 0),
            ("WHEEL_SPEED_FL", "WHEEL_SPEEDS", 0),
            ("WHEEL_SPEED_FR", "WHEEL_SPEEDS", 0),
            ("WHEEL_SPEED_RL", "WHEEL_SPEEDS", 0),
            ("WHEEL_SPEED_RR", "WHEEL_SPEEDS", 0),
            ("DOOR_OPEN_FL", "SEATS_DOORS", 1),
            ("DOOR_OPEN_FR", "SEATS_DOORS", 1),
            ("DOOR_OPEN_RL", "SEATS_DOORS", 1),
            ("DOOR_OPEN_RR", "SEATS_DOORS", 1),
            ("SEATBELT_DRIVER_UNLATCHED", "SEATS_DOORS", 1),
            ("TC_DISABLED", "ESP_CONTROL", 1),
            ("STEER_FRACTION", "STEER_ANGLE_SENSOR", 0),
            ("STEER_RATE", "STEER_ANGLE_SENSOR", 0),
            ("CRUISE_ACTIVE", "PCM_CRUISE", 0),
            ("CRUISE_STATE", "PCM_CRUISE", 0),
            ("GAS_RELEASED", "PCM_CRUISE", 1),
            ("STEER_TORQUE_DRIVER", "STEER_TORQUE_SENSOR", 0),
            ("STEER_TORQUE_EPS", "STEER_TORQUE_SENSOR", 0),
            ("STEER_ANGLE", "STEER_TORQUE_SENSOR", 0),
            ("TURN_SIGNALS", "STEERING_LEVERS", 3),  # 3 is no blinkers
            ("LKA_STATE", "EPS_STATUS", 0),
            ("AUTO_HIGH_BEAM", "LIGHT_STALK", 0),
        ]

        checks = [
            ("GEAR_PACKET", 1),
            ("LIGHT_STALK", 1),
            ("STEERING_LEVERS", 0.15),
            ("SEATS_DOORS", 3),
            ("ESP_CONTROL", 3),
            ("EPS_STATUS", 25),
            ("BRAKE_MODULE", 40),
            ("GAS_PEDAL", 33),
            ("WHEEL_SPEEDS", 80),
            ("STEER_ANGLE_SENSOR", 80),
            ("PCM_CRUISE", 33),
            ("STEER_TORQUE_SENSOR", 50),
        ]

        if CP.carFingerprint == CAR.LEXUS_IS:
            signals.append(("MAIN_ON", "DSU_CRUISE", 0))
            signals.append(("SET_SPEED", "DSU_CRUISE", 0))
            checks.append(("DSU_CRUISE", 5))
        else:
            signals.append(("MAIN_ON", "PCM_CRUISE_2", 0))
            signals.append(("SET_SPEED", "PCM_CRUISE_2", 0))
            signals.append(("LOW_SPEED_LOCKOUT", "PCM_CRUISE_2", 0))
            checks.append(("PCM_CRUISE_2", 33))

        # add gas interceptor reading if we are using it
        if CP.enableGasInterceptor:
            signals.append(("INTERCEPTOR_GAS", "GAS_SENSOR", 0))
            signals.append(("INTERCEPTOR_GAS2", "GAS_SENSOR", 0))
            checks.append(("GAS_SENSOR", 50))

        if CP.enableBsm:
            signals += [
                ("L_ADJACENT", "BSM", 0),
                ("L_APPROACHING", "BSM", 0),
                ("R_ADJACENT", "BSM", 0),
                ("R_APPROACHING", "BSM", 0),
            ]
            checks += [("BSM", 1)]

        return CANParser(DBC[CP.carFingerprint]["pt"], signals, checks, 0)
Esempio n. 17
0
    def get_pq_can_parser(CP):
        signals = [
            # sig_name, sig_address, default
            ("LH3_BLW", "Lenkhilfe_3", 0),  # Absolute steering angle
            ("LH3_BLWSign", "Lenkhilfe_3", 0),  # Steering angle sign
            ("LH3_LM", "Lenkhilfe_3", 0),  # Absolute driver torque input
            ("LH3_LMSign", "Lenkhilfe_3", 0),  # Driver torque input sign
            ("LH2_Sta_HCA", "Lenkhilfe_2", 0),  # Steering rack HCA status
            ("Lenkradwinkel_Geschwindigkeit", "Lenkwinkel_1",
             0),  # Absolute steering rate
            ("Lenkradwinkel_Geschwindigkeit_S", "Lenkwinkel_1",
             0),  # Steering rate sign
            ("Radgeschw__VL_4_1", "Bremse_3",
             0),  # ABS wheel speed, front left
            ("Radgeschw__VR_4_1", "Bremse_3",
             0),  # ABS wheel speed, front right
            ("Radgeschw__HL_4_1", "Bremse_3", 0),  # ABS wheel speed, rear left
            ("Radgeschw__HR_4_1", "Bremse_3",
             0),  # ABS wheel speed, rear right
            ("Giergeschwindigkeit", "Bremse_5", 0),  # Absolute yaw rate
            ("Vorzeichen_der_Giergeschwindigk", "Bremse_5",
             0),  # Yaw rate sign
            ("GK1_Fa_Tuerkont", "Gate_Komf_1", 0),  # Door open, driver
            # TODO: locate passenger and rear door states
            ("GK1_Blinker_li", "Gate_Komf_1", 0),  # Left turn signal on
            ("GK1_Blinker_re", "Gate_Komf_1", 0),  # Right turn signal on
            ("Gurtschalter_Fahrer", "Airbag_1", 0),  # Seatbelt status, driver
            ("Gurtschalter_Beifahrer", "Airbag_1",
             0),  # Seatbelt status, passenger
            ("Bremstestschalter", "Motor_2",
             0),  # Brake pedal pressed (brake light test switch)
            ("Bremslichtschalter", "Motor_2",
             0),  # Brakes applied (brake light switch)
            ("Bremsdruck", "Bremse_5", 0),  # Brake pressure applied
            ("Vorzeichen_Bremsdruck", "Bremse_5",
             0),  # Brake pressure applied sign (???)
            ("Fahrpedal_Rohsignal", "Motor_3", 0),  # Accelerator pedal value
            ("ESP_Passiv_getastet", "Bremse_1",
             0),  # Stability control disabled
            ("MFA_v_Einheit_02", "Einheiten_1", 0),  # MPH vs KMH speed display
            ("Bremsinfo", "Kombi_1", 0),  # Manual handbrake applied
            ("GRA_Status", "Motor_2", 0),  # ACC engagement status
            ("Hauptschalter", "GRA_neu", 0),  # ACC button, on/off
            ("Abbrechen", "GRA_neu", 0),  # ACC button, cancel
            ("Setzen", "GRA_neu", 0),  # ACC button, set
            ("Lang_Tip_up", "GRA_neu",
             0),  # ACC button, increase or accel, long press
            ("Lang_Tip_down", "GRA_neu",
             0),  # ACC button, decrease or decel, long press
            ("Kurz_Tip_up", "GRA_neu",
             0),  # ACC button, increase or accel, short press
            ("Kurz_Tip_down", "GRA_neu",
             0),  # ACC button, decrease or decel, short press
            ("Wiederaufnahme", "GRA_neu", 0),  # ACC button, resume
            ("Zeitlueckenverstellung", "GRA_neu",
             0),  # ACC button, time gap adj
        ]

        checks = [
            # sig_address, frequency
            ("Bremse_3", 100),  # From J104 ABS/ESP controller
            ("Lenkhilfe_3",
             100),  # From J500 Steering Assist with integrated sensors
            ("Lenkwinkel_1",
             100),  # From J500 Steering Assist with integrated sensors
            ("Motor_3", 100),  # From J623 Engine control module
            ("Airbag_1", 50),  # From J234 Airbag control module
            ("Bremse_5", 50),  # From J104 ABS/ESP controller
            ("GRA_neu", 50),  # From J??? steering wheel control buttons
            ("Kombi_1", 50),  # From J285 Instrument cluster
            ("Motor_2", 50),  # From J623 Engine control module
            ("Lenkhilfe_2",
             20),  # From J500 Steering Assist with integrated sensors
            ("Gate_Komf_1", 10),  # From J533 CAN gateway
            ("Einheiten_1", 1),  # From J??? cluster or gateway
        ]

        if CP.transmissionType == TRANS.automatic:
            signals += [("Waehlhebelposition__Getriebe_1_", "Getriebe_1", 0)
                        ]  # Auto trans gear selector position
            checks += [("Getriebe_1", 100)
                       ]  # From J743 Auto transmission control module
        elif CP.transmissionType == TRANS.manual:
            signals += [
                ("Kupplungsschalter", "Motor_1", 0),  # Clutch switch
                ("GK1_Rueckfahr", "Gate_Komf_1", 0)
            ]  # Reverse light from BCM
            checks += [("Motor_1", 100)]  # From J623 Engine control module

        if CP.networkLocation == NWL.fwdCamera:
            # The ACC radar is here on CANBUS.pt
            signals += [("ACA_V_Wunsch", "ACC_GRA_Anziege", 0)
                        ]  # ACC set speed
            checks += [("ACC_GRA_Anziege", 25)
                       ]  # From J428 ACC radar control module

        checks = []
        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks,
                         CANBUS.pt)
Esempio n. 18
0
  def get_can_parser(CP):
    # this function generates lists for signal, messages and initial values
    signals = [
      # sig_name, sig_address, default
      ("LEFT_BLINK", "BLINK_INFO", 0),
      ("RIGHT_BLINK", "BLINK_INFO", 0),
      ("STEER_ANGLE", "STEER", 0),
      ("STEER_ANGLE_RATE", "STEER_RATE", 0),
      ("STEER_TORQUE_SENSOR", "STEER_TORQUE", 0),
      ("STEER_TORQUE_MOTOR", "STEER_TORQUE", 0),
      ("FL", "WHEEL_SPEEDS", 0),
      ("FR", "WHEEL_SPEEDS", 0),
      ("RL", "WHEEL_SPEEDS", 0),
      ("RR", "WHEEL_SPEEDS", 0),
    ]

    checks = [
      # sig_address, frequency
      ("BLINK_INFO", 10),
      ("STEER", 67),
      ("STEER_RATE", 83),
      ("STEER_TORQUE", 83),
      ("WHEEL_SPEEDS", 100),
    ]

    if CP.carFingerprint in GEN1:
      signals += [
        ("LKAS_BLOCK", "STEER_RATE", 0),
        ("LKAS_TRACK_STATE", "STEER_RATE", 0),
        ("HANDS_OFF_5_SECONDS", "STEER_RATE", 0),
        ("CRZ_ACTIVE", "CRZ_CTRL", 0),
        ("STANDSTILL", "PEDALS", 0),
        ("BRAKE_ON", "PEDALS", 0),
        ("BRAKE_PRESSURE", "BRAKE", 0),
        ("GEAR", "GEAR", 0),
        ("DRIVER_SEATBELT", "SEATBELT", 0),
        ("FL", "DOORS", 0),
        ("FR", "DOORS", 0),
        ("BL", "DOORS", 0),
        ("BR", "DOORS", 0),
        ("PEDAL_GAS", "ENGINE_DATA", 0),
        ("SPEED", "ENGINE_DATA", 0),
        ("RES", "CRZ_BTNS", 0),
        ("SET_P", "CRZ_BTNS", 0),
        ("SET_M", "CRZ_BTNS", 0),
        ("CTR", "CRZ_BTNS", 0),
        ("LEFT_BS1", "BSM", 0),
        ("RIGHT_BS1", "BSM", 0),
      ]

      checks += [
        ("ENGINE_DATA", 100),
        ("CRZ_CTRL", 50),
        ("CRZ_BTNS", 10),
        ("PEDALS", 50),
        ("BRAKE", 50),
        ("SEATBELT", 10),
        ("DOORS", 10),
        ("GEAR", 20),
        ("BSM", 10),
      ]

    return CANParser(DBC[CP.carFingerprint]["pt"], signals, checks, 0)
Esempio n. 19
0
    def get_can_parser(CP):
        # this function generates lists for signal, messages and initial values
        signals = [
            # sig_name, sig_address, default
            ("Steer_Torque_Sensor", "Steering_Torque", 0),
            ("Steer_Torque_Output", "Steering_Torque", 0),
            ("Steering_Angle", "Steering_Torque", 0),
            ("Steer_Error_1", "Steering_Torque", 0),
            ("Brake_Pedal", "Brake_Pedal", 0),
            ("LEFT_BLINKER", "Dashlights", 0),
            ("RIGHT_BLINKER", "Dashlights", 0),
            ("SEATBELT_FL", "Dashlights", 0),
            ("DOOR_OPEN_FR", "BodyInfo", 1),
            ("DOOR_OPEN_FL", "BodyInfo", 1),
            ("DOOR_OPEN_RR", "BodyInfo", 1),
            ("DOOR_OPEN_RL", "BodyInfo", 1),
        ]
        checks = [
            # sig_address, frequency
            ("Throttle", 100),
            ("Brake_Pedal", 50),
            ("Steering_Torque", 50),
        ]

        # Wheel_Speeds is on can1 for OUTBACK
        if CP.carFingerprint != CAR.OUTBACK:
            signals += [
                ("FL", "Wheel_Speeds", 0),
                ("FR", "Wheel_Speeds", 0),
                ("RL", "Wheel_Speeds", 0),
                ("RR", "Wheel_Speeds", 0),
            ]
            checks += [
                ("Wheel_Speeds", 50),
            ]

        # Transmission is on can1 for CROSSTREK_2020H
        if CP.carFingerprint != CAR.CROSSTREK_2020H:
            signals += [
                ("Gear", "Transmission", 0),
            ]

            checks += [
                ("Transmission", 100),
            ]

        # CruiseControl is on can1 for OUTBACK and not used for CROSSTREK_2020H
        if CP.carFingerprint not in [CAR.OUTBACK, CAR.CROSSTREK_2020H]:
            signals += [
                ("Cruise_On", "CruiseControl", 0),
                ("Cruise_Activated", "CruiseControl", 0),
            ]

        if CP.carFingerprint in PREGLOBAL_CARS:
            signals += [
                ("Throttle_Pedal", "Throttle", 0),
                ("Counter", "Throttle", 0),
                ("Signal1", "Throttle", 0),
                ("Not_Full_Throttle", "Throttle", 0),
                ("Signal2", "Throttle", 0),
                ("Engine_RPM", "Throttle", 0),
                ("Off_Throttle", "Throttle", 0),
                ("Signal3", "Throttle", 0),
                ("Throttle_Cruise", "Throttle", 0),
                ("Throttle_Combo", "Throttle", 0),
                ("Throttle_Body", "Throttle", 0),
                ("Off_Throttle_2", "Throttle", 0),
                ("Signal4", "Throttle", 0),
                ("UNITS", "Dash_State2", 0),
                ("Steering_Angle", "Steering", 0),
            ]

            checks += [
                ("BodyInfo", 1),
                ("CruiseControl", 50),
                ("Dash_State2", 1),
                ("Steering", 50),
            ]

            if CP.carFingerprint in [
                    CAR.FORESTER_PREGLOBAL, CAR.LEVORG_PREGLOBAL,
                    CAR.WRX_PREGLOBAL
            ]:
                checks += [
                    ("Dashlights", 20),
                ]
            elif CP.carFingerprint in [
                    CAR.LEGACY_PREGLOBAL, CAR.LEGACY_PREGLOBAL_2018,
                    CAR.OUTBACK_PREGLOBAL, CAR.OUTBACK_PREGLOBAL_2018
            ]:
                checks += [
                    ("Dashlights", 10),
                ]

        else:
            signals += [
                ("Counter", "Throttle", 0),
                ("Signal1", "Throttle", 0),
                ("Engine_RPM", "Throttle", 0),
                ("Signal2", "Throttle", 0),
                ("Throttle_Pedal", "Throttle", 0),
                ("Throttle_Cruise", "Throttle", 0),
                ("Throttle_Combo", "Throttle", 0),
                ("Signal1", "Throttle", 0),
                ("Off_Accel", "Throttle", 0),
                ("Counter", "Brake_Pedal", 0),
                ("Signal1", "Brake_Pedal", 0),
                ("Speed", "Brake_Pedal", 0),
                ("Signal2", "Brake_Pedal", 0),
                ("Brake_Lights", "Brake_Pedal", 0),
                ("Signal3", "Brake_Pedal", 0),
                ("Signal4", "Brake_Pedal", 0),
                ("Steer_Warning", "Steering_Torque", 0),
                ("UNITS", "Dashlights", 0),
            ]

            checks += [
                ("Dashlights", 10),
                ("BodyInfo", 10),
            ]

            # Brake_Status is on can1 for OUTBACK
            if CP.carFingerprint != CAR.OUTBACK:
                signals += [
                    ("Brake", "Brake_Status", 0),
                ]

                checks += [
                    ("Brake_Status", 50),
                ]

            # CruiseControl is on can1 for OUTBACK and nod used for CROSSTREK_2020H
            if CP.carFingerprint not in [CAR.OUTBACK, CAR.CROSSTREK_2020H]:
                checks += [
                    ("CruiseControl", 20),
                ]

        if CP.enableBsm:
            signals += [
                ("L_ADJACENT", "BSD_RCTA", 0),
                ("R_ADJACENT", "BSD_RCTA", 0),
                ("L_APPROACHING", "BSD_RCTA", 0),
                ("R_APPROACHING", "BSD_RCTA", 0),
            ]
            checks += [
                ("BSD_RCTA", 17),
            ]

        return CANParser(DBC[CP.carFingerprint]["pt"], signals, checks, 0)
Esempio n. 20
0
    def get_can_parser(CP):

        signals = [
            # sig_name, sig_address, default
            ("WHL_SPD_FL", "WHL_SPD11", 0),
            ("WHL_SPD_FR", "WHL_SPD11", 0),
            ("WHL_SPD_RL", "WHL_SPD11", 0),
            ("WHL_SPD_RR", "WHL_SPD11", 0),
            ("YAW_RATE", "ESP12", 0),
            ("CF_Gway_DrvSeatBeltInd", "CGW4", 1),
            ("CF_Gway_DrvSeatBeltSw", "CGW1", 0),  # Driver Seatbelt
            ("CF_Gway_DrvDrSw", "CGW1", 0),  # Driver Door is open
            ("CF_Gway_AstDrSw", "CGW1", 0),  # Passenger door is open
            ("CF_Gway_RLDrSw", "CGW2", 0),  # Rear reft door is open
            ("CF_Gway_RRDrSw", "CGW2", 0),  # Rear right door is open
            ("CF_Gway_TSigLHSw", "CGW1", 0),
            ("CF_Gway_TurnSigLh", "CGW1", 0),
            ("CF_Gway_TSigRHSw", "CGW1", 0),
            ("CF_Gway_TurnSigRh", "CGW1", 0),
            ("CF_Gway_ParkBrakeSw", "CGW1", 0),  # Parking Brake
            ("CYL_PRES", "ESP12", 0),
            ("CF_Clu_CruiseSwState", "CLU11", 0),
            ("CF_Clu_CruiseSwMain", "CLU11", 0),
            ("CF_Clu_SldMainSW", "CLU11", 0),
            ("CF_Clu_ParityBit1", "CLU11", 0),
            ("CF_Clu_VanzDecimal", "CLU11", 0),
            ("CF_Clu_Vanz", "CLU11", 0),
            ("CF_Clu_SPEED_UNIT", "CLU11", 0),
            ("CF_Clu_DetentOut", "CLU11", 0),
            ("CF_Clu_RheostatLevel", "CLU11", 0),
            ("CF_Clu_CluInfo", "CLU11", 0),
            ("CF_Clu_AmpInfo", "CLU11", 0),
            ("CF_Clu_AliveCnt1", "CLU11", 0),
            ("ACCEnable", "TCS13", 0),
            ("BrakeLight", "TCS13", 0),
            ("DriverBraking", "TCS13", 0),
            ("CF_VSM_Avail", "TCS13", 0),
            ("ESC_Off_Step", "TCS15", 0),
            ("CF_Lvr_GearInf", "LVR11",
             0),  # Transmission Gear (0 = N or P, 1-8 = Fwd, 14 = Rev)
            ("CF_Lca_Stat", "LCA11", 0),
            ("CF_Lca_IndLeft", "LCA11", 0),
            ("CF_Lca_IndRight", "LCA11", 0),
            ("MainMode_ACC", "SCC11", 1),
            ("SCCInfoDisplay", "SCC11", 0),
            ("AliveCounterACC", "SCC11", 0),
            ("VSetDis", "SCC11", 30),
            ("ObjValid", "SCC11", 0),
            ("DriverAlertDisplay", "SCC11", 0),
            ("TauGapSet", "SCC11", 4),
            ("ACC_ObjStatus", "SCC11", 0),
            ("ACC_ObjLatPos", "SCC11", 0),
            ("ACC_ObjDist", "SCC11", 150),  #TK211X value is 204.6
            ("ACC_ObjRelSpd", "SCC11", 0),
            ("Navi_SCC_Curve_Status", "SCC11", 0),
            ("Navi_SCC_Curve_Act", "SCC11", 0),
            ("Navi_SCC_Camera_Act", "SCC11", 0),
            ("Navi_SCC_Camera_Status", "SCC11", 2),
            ("ACCMode", "SCC12", 0),
            ("CF_VSM_Prefill", "SCC12", 0),
            ("CF_VSM_DecCmdAct", "SCC12", 0),
            ("CF_VSM_HBACmd", "SCC12", 0),
            ("CF_VSM_Warn", "SCC12", 0),
            ("CF_VSM_Stat", "SCC12", 0),
            ("CF_VSM_BeltCmd", "SCC12", 0),
            ("ACCFailInfo", "SCC12", 0),
            ("StopReq", "SCC12", 0),
            ("CR_VSM_DecCmd", "SCC12", 0),
            ("aReqRaw", "SCC12", 0),  #aReqMax
            ("TakeOverReq", "SCC12", 0),
            ("PreFill", "SCC12", 0),
            ("aReqValue", "SCC12", 0),  #aReqMin
            ("CF_VSM_ConfMode", "SCC12", 1),
            ("AEB_Failinfo", "SCC12", 0),
            ("AEB_Status", "SCC12", 2),
            ("AEB_CmdAct", "SCC12", 0),
            ("AEB_StopReq", "SCC12", 0),
            ("CR_VSM_Alive", "SCC12", 0),
            ("CR_VSM_ChkSum", "SCC12", 0),
            ("SCCDrvModeRValue", "SCC13", 2),
            ("SCC_Equip", "SCC13", 1),
            ("AebDrvSetStatus", "SCC13", 0),
            ("JerkUpperLimit", "SCC14", 0),
            ("JerkLowerLimit", "SCC14", 0),
            ("SCCMode2", "SCC14", 0),
            ("ComfortBandUpper", "SCC14", 0),
            ("ComfortBandLower", "SCC14", 0),
        ]

        checks = [
            # address, frequency
            ("TCS13", 50),
            ("TCS15", 10),
            ("CLU11", 50),
            ("ESP12", 100),
            ("CGW1", 10),
            ("CGW4", 5),
            ("WHL_SPD11", 50),
        ]
        if CP.sccBus == 0 and CP.enableCruise:
            checks += [
                ("SCC11", 50),
                ("SCC12", 50),
            ]
        if CP.mdpsBus == 0:
            signals += [("CR_Mdps_StrColTq", "MDPS12", 0),
                        ("CF_Mdps_Def", "MDPS12", 0),
                        ("CF_Mdps_ToiActive", "MDPS12", 0),
                        ("CF_Mdps_ToiUnavail", "MDPS12", 0),
                        ("CF_Mdps_MsgCount2", "MDPS12", 0),
                        ("CF_Mdps_Chksum2", "MDPS12", 0),
                        ("CF_Mdps_ToiFlt", "MDPS12", 0),
                        ("CF_Mdps_SErr", "MDPS12", 0),
                        ("CR_Mdps_StrTq", "MDPS12", 0),
                        ("CF_Mdps_FailStat", "MDPS12", 0),
                        ("CR_Mdps_OutTq", "MDPS12", 0)]
            checks += [("MDPS12", 50)]
        if CP.sasBus == 0:
            signals += [
                ("SAS_Angle", "SAS11", 0),
                ("SAS_Speed", "SAS11", 0),
            ]
            checks += [("SAS11", 100)]
        if CP.sccBus == -1:
            signals += [
                ("CRUISE_LAMP_M", "EMS16", 0),
                ("CF_Lvr_CruiseSet", "LVR12", 0),
            ]
        if CP.carFingerprint in FEATURES["use_cluster_gears"]:
            signals += [
                ("CF_Clu_InhibitD", "CLU15", 0),
                ("CF_Clu_InhibitP", "CLU15", 0),
                ("CF_Clu_InhibitN", "CLU15", 0),
                ("CF_Clu_InhibitR", "CLU15", 0),
            ]
        elif CP.carFingerprint in FEATURES["use_tcu_gears"]:
            signals += [
                ("CUR_GR", "TCU12", 0),
            ]
        elif CP.carFingerprint in FEATURES["use_elect_gears"]:
            signals += [
                ("Elect_Gear_Shifter", "ELECT_GEAR", 0),
            ]
        else:
            signals += [
                ("CF_Lvr_Gear", "LVR12", 0),
            ]
        if CP.carFingerprint not in FEATURES["use_elect_ems"]:
            signals += [
                ("PV_AV_CAN", "EMS12", 0),
                ("CF_Ems_AclAct", "EMS16", 0),
            ]
            checks += [
                ("EMS12", 100),
                ("EMS16", 100),
            ]
        else:
            signals += [
                ("Accel_Pedal_Pos", "E_EMS11", 0),
                ("Brake_Pedal_Pos", "E_EMS11", 0),
            ]
            checks += [
                ("E_EMS11", 100),
            ]

        if CP.carFingerprint in FEATURES["use_fca"]:
            signals += [
                ("FCA_CmdAct", "FCA11", 0),
                ("CF_VSM_Warn", "FCA11", 0),
            ]
            checks += [("FCA11", 50)]

        if CP.carFingerprint in [CAR.SANTA_FE]:
            checks.remove(("TCS13", 50))
        if CP.spasEnabled:
            if CP.mdpsBus == 1:
                signals += [
                    ("SWI_IGK", "EMS11", 0),
                    ("F_N_ENG", "EMS11", 0),
                    ("ACK_TCS", "EMS11", 0),
                    ("PUC_STAT", "EMS11", 0),
                    ("TQ_COR_STAT", "EMS11", 0),
                    ("RLY_AC", "EMS11", 0),
                    ("F_SUB_TQI", "EMS11", 0),
                    ("TQI_ACOR", "EMS11", 0),
                    ("N", "EMS11", 0),
                    ("TQI", "EMS11", 0),
                    ("TQFR", "EMS11", 0),
                    ("VS", "EMS11", 0),
                    ("RATIO_TQI_BAS_MAX_STND", "EMS11", 0),
                ]
                checks += [("EMS11", 100)]
            elif CP.mdpsBus == 0:
                signals += [
                    ("CR_Mdps_StrAng", "MDPS11", 0),
                    ("CF_Mdps_Stat", "MDPS11", 0),
                ]
                checks += [("MDPS11", 100)]

        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 0)
Esempio n. 21
0
    def get_can_parser(CP):
        checks = []
        signals = [
            # sig_name, sig_address, default
            ("WHL_SPD_FL", "WHL_SPD11", 0),
            ("WHL_SPD_FR", "WHL_SPD11", 0),
            ("WHL_SPD_RL", "WHL_SPD11", 0),
            ("WHL_SPD_RR", "WHL_SPD11", 0),
            ("YAW_RATE", "ESP12", 0),
            ("CF_Gway_DrvSeatBeltInd", "CGW4", 1),
            ("CF_Gway_DrvSeatBeltSw", "CGW1", 0),
            ("CF_Gway_DrvDrSw", "CGW1", 0),  # Driver Door
            ("CF_Gway_AstDrSw", "CGW1", 0),  # Passenger door
            ("CF_Gway_RLDrSw", "CGW2", 0),  # Rear reft door
            ("CF_Gway_RRDrSw", "CGW2", 0),  # Rear right door
            ("CF_Gway_TSigLHSw", "CGW1", 0),
            ("CF_Gway_TurnSigLh", "CGW1", 0),
            ("CF_Gway_TSigRHSw", "CGW1", 0),
            ("CF_Gway_TurnSigRh", "CGW1", 0),
            ("CF_Gway_ParkBrakeSw", "CGW1", 0),
            ("CYL_PRES", "ESP12", 0),
            ("AVH_STAT", "ESP11", 0),
            ("CF_Clu_CruiseSwState", "CLU11", 0),
            ("CF_Clu_CruiseSwMain", "CLU11", 0),
            ("CF_Clu_SldMainSW", "CLU11", 0),
            ("CF_Clu_ParityBit1", "CLU11", 0),
            ("CF_Clu_VanzDecimal", "CLU11", 0),
            ("CF_Clu_Vanz", "CLU11", 0),
            ("CF_Clu_SPEED_UNIT", "CLU11", 0),
            ("CF_Clu_DetentOut", "CLU11", 0),
            ("CF_Clu_RheostatLevel", "CLU11", 0),
            ("CF_Clu_CluInfo", "CLU11", 0),
            ("CF_Clu_AmpInfo", "CLU11", 0),
            ("CF_Clu_AliveCnt1", "CLU11", 0),
            ("ACCEnable", "TCS13", 0),
            ("BrakeLight", "TCS13", 0),
            ("DriverBraking", "TCS13", 0),
            ("DriverOverride", "TCS13", 0),
            ("ESC_Off_Step", "TCS15", 0),
            ("CF_Lvr_CruiseSet", "LVR12", 0),
            ("CRUISE_LAMP_M", "EMS16", 0),
            ("CR_VSM_Alive", "SCC12", 0),
            ("AliveCounterACC", "SCC11", 0),
            ("CR_FCA_Alive", "FCA11", 0),
            ("Supplemental_Counter", "FCA11", 0),
            ("PRESSURE_FL", "TPMS11", 0),
            ("PRESSURE_FR", "TPMS11", 0),
            ("PRESSURE_RL", "TPMS11", 0),
            ("PRESSURE_RR", "TPMS11", 0),
        ]

        checks = [
            # address, frequency
            ("TCS13", 50),
            ("TCS15", 10),
            ("CLU11", 50),
            ("ESP12", 100),
            ("CGW1", 10),
            ("CGW4", 5),
            ("WHL_SPD11", 50),
        ]

        if CP.sccBus == 0:
            signals += [
                ("MainMode_ACC", "SCC11", 0),
                ("VSetDis", "SCC11", 0),
                ("SCCInfoDisplay", "SCC11", 0),
                ("ACC_ObjStatus", "SCC11", 0),
                ("ACC_ObjDist", "SCC11", 0),
                ("ObjValid", "SCC11", 0),
                ("ACC_ObjRelSpd", "SCC11", 0),
                ("AliveCounterACC", "SCC11", 0),
                ("ACCMode", "SCC12", 1),
                ("AEB_CmdAct", "SCC12", 0),
                ("CF_VSM_Warn", "SCC12", 0),
                ("CR_VSM_Alive", "SCC12", 0),
            ]
            checks += [
                ("SCC11", 50),
                ("SCC12", 50),
            ]
        if CP.fcaBus == 0:
            signals += [
                ("FCA_CmdAct", "FCA11", 0),
                ("CF_VSM_Warn", "FCA11", 0),
                ("CR_FCA_Alive", "FCA11", 0),
                ("Supplemental_Counter", "FCA11", 0),
            ]
            checks += [("FCA11", 50)]

        if not CP.mdpsHarness:
            signals += [("CR_Mdps_StrColTq", "MDPS12", 0),
                        ("CF_Mdps_Def", "MDPS12", 0),
                        ("CF_Mdps_ToiActive", "MDPS12", 0),
                        ("CF_Mdps_ToiUnavail", "MDPS12", 0),
                        ("CF_Mdps_MsgCount2", "MDPS12", 0),
                        ("CF_Mdps_Chksum2", "MDPS12", 0),
                        ("CF_Mdps_ToiFlt", "MDPS12", 0),
                        ("CF_Mdps_SErr", "MDPS12", 0),
                        ("CR_Mdps_StrTq", "MDPS12", 0),
                        ("CF_Mdps_FailStat", "MDPS12", 0),
                        ("CR_Mdps_OutTq", "MDPS12", 0)]
            checks += [("MDPS12", 50)]
        if CP.sasBus == 0:
            signals += [
                ("SAS_Angle", "SAS11", 0),
                ("SAS_Speed", "SAS11", 0),
            ]
            checks += [("SAS11", 100)]

        if CP.bsmAvailable:
            signals += [
                ("CF_Lca_IndLeft", "LCA11", 0),
                ("CF_Lca_IndRight", "LCA11", 0),
            ]
            checks += [("LCA11", 50)]

        if CP.carFingerprint in ELEC_VEH:
            signals += [
                ("Accel_Pedal_Pos", "E_EMS11", 0),
            ]
            checks += [
                ("E_EMS11", 50),
            ]
        elif CP.carFingerprint in HYBRID_VEH:
            signals += [
                ("CR_Vcu_AccPedDep_Pc", "EV_PC4", 0),
            ]
            checks += [
                ("EV_PC4", 50),
            ]
        elif CP.emsAvailable:
            signals += [
                ("PV_AV_CAN", "EMS12", 0),
                ("CF_Ems_AclAct", "EMS16", 0),
            ]
            checks += [
                ("EMS12", 100),
                ("EMS16", 100),
            ]

        if CP.carFingerprint in FEATURES["use_cluster_gears"]:
            signals += [
                ("CF_Clu_InhibitD", "CLU15", 0),
                ("CF_Clu_InhibitP", "CLU15", 0),
                ("CF_Clu_InhibitN", "CLU15", 0),
                ("CF_Clu_InhibitR", "CLU15", 0),
            ]
            checks += [("CLU15", 5)]
        elif CP.carFingerprint in FEATURES["use_tcu_gears"]:
            signals += [("CUR_GR", "TCU12", 0)]
            checks += [("TCU12", 100)]
        elif CP.evgearAvailable:
            signals += [("Elect_Gear_Shifter", "ELECT_GEAR", 0)]
            checks += [("ELECT_GEAR", 20)]
        elif CP.lvrAvailable:
            signals += [("CF_Lvr_Gear", "LVR12", 0)]
            checks += [("LVR12", 100)]

        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 0)
Esempio n. 22
0
 def get_can_parser(self, CP):
     signals, checks = get_can_signals(CP, self.gearbox_msg,
                                       self.main_on_sig_msg)
     bus_pt = 1 if CP.carFingerprint in HONDA_BOSCH else 0
     return CANParser(DBC[CP.carFingerprint]["pt"], signals, checks, bus_pt)
Esempio n. 23
0
    def get_can_parser(CP):
        # this function generates lists for signal, messages and initial values
        signals = [
            # sig_name, sig_address, default
            ("WHEEL_SPEED_FL", "WHEEL_SPEEDS_FRONT", 0),
            ("WHEEL_SPEED_FR", "WHEEL_SPEEDS_FRONT", 0),
            ("WHEEL_SPEED_RL", "WHEEL_SPEEDS_REAR", 0),
            ("WHEEL_SPEED_RR", "WHEEL_SPEEDS_REAR", 0),
            ("STEER_ANGLE", "STEER_ANGLE_SENSOR", 0),
            ("DOOR_OPEN_FR", "DOORS_LIGHTS", 1),
            ("DOOR_OPEN_FL", "DOORS_LIGHTS", 1),
            ("DOOR_OPEN_RR", "DOORS_LIGHTS", 1),
            ("DOOR_OPEN_RL", "DOORS_LIGHTS", 1),
            ("RIGHT_BLINKER", "LIGHTS", 0),
            ("LEFT_BLINKER", "LIGHTS", 0),
            ("ESP_DISABLED", "ESP", 0),
            ("GEAR_SHIFTER", "GEARBOX", 0),
        ]

        checks = [
            # sig_address, frequency
            ("WHEEL_SPEEDS_REAR", 50),
            ("WHEEL_SPEEDS_FRONT", 50),
            ("STEER_ANGLE_SENSOR", 100),
            ("DOORS_LIGHTS", 10),
        ]

        if CP.carFingerprint in [CAR.ROGUE, CAR.XTRAIL, CAR.ALTIMA]:
            signals += [
                ("USER_BRAKE_PRESSED", "DOORS_LIGHTS", 1),
                ("BRAKE_LIGHT", "DOORS_LIGHTS", 1),
                ("GAS_PEDAL", "GAS_PEDAL", 0),
                ("SEATBELT_DRIVER_LATCHED", "HUD", 0),
                ("SPEED_MPH", "HUD", 0),
                ("PROPILOT_BUTTON", "CRUISE_THROTTLE", 0),
                ("CANCEL_BUTTON", "CRUISE_THROTTLE", 0),
                ("GAS_PEDAL_INVERTED", "CRUISE_THROTTLE", 0),
                ("SET_BUTTON", "CRUISE_THROTTLE", 0),
                ("RES_BUTTON", "CRUISE_THROTTLE", 0),
                ("FOLLOW_DISTANCE_BUTTON", "CRUISE_THROTTLE", 0),
                ("NO_BUTTON_PRESSED", "CRUISE_THROTTLE", 0),
                ("GAS_PEDAL", "CRUISE_THROTTLE", 0),
                ("USER_BRAKE_PRESSED", "CRUISE_THROTTLE", 0),
                ("NEW_SIGNAL_2", "CRUISE_THROTTLE", 0),
                ("GAS_PRESSED_INVERTED", "CRUISE_THROTTLE", 0),
                ("unsure1", "CRUISE_THROTTLE", 0),
                ("unsure2", "CRUISE_THROTTLE", 0),
                ("unsure3", "CRUISE_THROTTLE", 0),
            ]

            checks += [
                ("GAS_PEDAL", 100),
                ("CRUISE_THROTTLE", 50),
                ("HUD", 25),
            ]

        elif CP.carFingerprint in [CAR.LEAF, CAR.LEAF_IC]:
            signals += [
                ("BRAKE_PEDAL", "BRAKE_PEDAL", 0),
                ("GAS_PEDAL", "CRUISE_THROTTLE", 0),
                ("CRUISE_AVAILABLE", "CRUISE_THROTTLE", 0),
                ("SPEED_MPH", "HUD_SETTINGS", 0),
                ("SEATBELT_DRIVER_LATCHED", "SEATBELT", 0),

                # Copy other values, we use this to cancel
                ("CANCEL_SEATBELT", "CANCEL_MSG", 0),
                ("NEW_SIGNAL_1", "CANCEL_MSG", 0),
                ("NEW_SIGNAL_2", "CANCEL_MSG", 0),
                ("NEW_SIGNAL_3", "CANCEL_MSG", 0),
            ]
            checks += [
                ("BRAKE_PEDAL", 100),
                ("CRUISE_THROTTLE", 50),
            ]

        if CP.carFingerprint == CAR.ALTIMA:
            signals += [
                ("LKAS_ENABLED", "LKAS_SETTINGS", 0),
                ("CRUISE_ENABLED", "CRUISE_STATE", 0),
                ("SET_SPEED", "PROPILOT_HUD", 0),
            ]
            checks += [
                ("CRUISE_STATE", 10),
                ("LKAS_SETTINGS", 10),
                ("PROPILOT_HUD", 50),
            ]
            return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 1)

        signals += [
            ("STEER_TORQUE_DRIVER", "STEER_TORQUE_SENSOR", 0),
        ]
        checks += [
            ("STEER_TORQUE_SENSOR", 100),
        ]

        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 0)
Esempio n. 24
0
    def get_can_parser(CP):

        signals = [
            # sig_name, sig_address, default
            ("WHL_SPD_FL", "WHL_SPD11", 0),
            ("WHL_SPD_FR", "WHL_SPD11", 0),
            ("WHL_SPD_RL", "WHL_SPD11", 0),
            ("WHL_SPD_RR", "WHL_SPD11", 0),
            ("YAW_RATE", "ESP12", 0),
            ("CF_Gway_DrvSeatBeltInd", "CGW4", 1),
            ("CF_Gway_DrvSeatBeltSw", "CGW1", 0),  # Driver Seatbelt
            ("CF_Gway_DrvDrSw", "CGW1", 0),  # Driver Door is open
            ("CF_Gway_AstDrSw", "CGW1", 0),  # Passenger door is open
            ("CF_Gway_RLDrSw", "CGW2", 0),  # Rear reft door is open
            ("CF_Gway_RRDrSw", "CGW2", 0),  # Rear right door is open
            ("CF_Gway_TSigLHSw", "CGW1", 0),
            ("CF_Gway_TurnSigLh", "CGW1", 0),
            ("CF_Gway_TSigRHSw", "CGW1", 0),
            ("CF_Gway_TurnSigRh", "CGW1", 0),
            ("CF_Gway_ParkBrakeSw", "CGW1", 0),  # Parking Brake
            ("CYL_PRES", "ESP12", 0),
            ("CF_Clu_CruiseSwState", "CLU11", 0),
            ("CF_Clu_CruiseSwMain", "CLU11", 0),
            ("CF_Clu_SldMainSW", "CLU11", 0),
            ("CF_Clu_ParityBit1", "CLU11", 0),
            ("CF_Clu_VanzDecimal", "CLU11", 0),
            ("CF_Clu_Vanz", "CLU11", 0),
            ("CF_Clu_SPEED_UNIT", "CLU11", 0),
            ("CF_Clu_DetentOut", "CLU11", 0),
            ("CF_Clu_RheostatLevel", "CLU11", 0),
            ("CF_Clu_CluInfo", "CLU11", 0),
            ("CF_Clu_AmpInfo", "CLU11", 0),
            ("CF_Clu_AliveCnt1", "CLU11", 0),
            ("ACCEnable", "TCS13", 0),
            ("BrakeLight", "TCS13", 0),
            ("DriverBraking", "TCS13", 0),
            ("ESC_Off_Step", "TCS15", 0),
            ("CF_Lvr_GearInf", "LVR11",
             0),  #Transmission Gear (0 = N or P, 1-8 = Fwd, 14 = Rev)
            ("CF_Lca_Stat", "LCA11", 0),
            ("CF_Lca_IndLeft", "LCA11", 0),
            ("CF_Lca_IndRight", "LCA11", 0),
        ]

        checks = [
            # address, frequency
            ("TCS13", 50),
            ("TCS15", 10),
            ("CLU11", 50),
            ("ESP12", 100),
            ("CGW1", 10),
            ("CGW4", 5),
            ("WHL_SPD11", 50),
        ]
        if not CP.mdpsBus:
            signals += [("CR_Mdps_StrColTq", "MDPS12", 0),
                        ("CF_Mdps_Def", "MDPS12", 0),
                        ("CF_Mdps_ToiActive", "MDPS12", 0),
                        ("CF_Mdps_ToiUnavail", "MDPS12", 0),
                        ("CF_Mdps_MsgCount2", "MDPS12", 0),
                        ("CF_Mdps_Chksum2", "MDPS12", 0),
                        ("CF_Mdps_ToiFlt", "MDPS12", 0),
                        ("CF_Mdps_SErr", "MDPS12", 0),
                        ("CR_Mdps_StrTq", "MDPS12", 0),
                        ("CF_Mdps_FailStat", "MDPS12", 0),
                        ("CR_Mdps_OutTq", "MDPS12", 0)]
            checks += [("MDPS12", 50)]
        if not CP.sasBus:
            signals += [
                ("SAS_Angle", "SAS11", 0),
                ("SAS_Speed", "SAS11", 0),
            ]
            checks += [("SAS11", 100)]
        if CP.sccBus == -1:
            signals += [
                ("CRUISE_LAMP_M", "EMS16", 0),
                ("CF_Lvr_CruiseSet", "LVR12", 0),
            ]
        elif not CP.sccBus:
            signals += [
                ("MainMode_ACC", "SCC11", 0),
                ("VSetDis", "SCC11", 0),
                ("SCCInfoDisplay", "SCC11", 0),
                ("ACC_ObjDist", "SCC11", 0),
                ("TauGapSet", "SCC11", 0),
                ("ACCMode", "SCC12", 0),
                ("CF_VSM_Prefill", "SCC12", 0),
                ("CF_VSM_DecCmdAct", "SCC12", 0),
                ("CF_VSM_HBACmd", "SCC12", 0),
                ("CF_VSM_Warn", "SCC12", 0),
                ("CF_VSM_Stat", "SCC12", 0),
                ("CF_VSM_BeltCmd", "SCC12", 0),
                ("ACCFailInfo", "SCC12", 0),
                ("ACCMode", "SCC12", 0),
                ("StopReq", "SCC12", 0),
                ("CR_VSM_DecCmd", "SCC12", 0),
                ("aReqMax", "SCC12", 0),
                ("TakeOverReq", "SCC12", 0),
                ("PreFill", "SCC12", 0),
                ("aReqMin", "SCC12", 0),
                ("CF_VSM_ConfMode", "SCC12", 0),
                ("AEB_Failinfo", "SCC12", 0),
                ("AEB_Status", "SCC12", 0),
                ("AEB_CmdAct", "SCC12", 0),
                ("AEB_StopReq", "SCC12", 0),
                ("CR_VSM_Alive", "SCC12", 0),
                ("CR_VSM_ChkSum", "SCC12", 0),
            ]
            checks += [
                ("SCC11", 50),
                ("SCC12", 50),
            ]
        if CP.carFingerprint in FEATURES["use_cluster_gears"]:
            signals += [
                ("CF_Clu_InhibitD", "CLU15", 0),
                ("CF_Clu_InhibitP", "CLU15", 0),
                ("CF_Clu_InhibitN", "CLU15", 0),
                ("CF_Clu_InhibitR", "CLU15", 0),
            ]
        elif CP.carFingerprint in FEATURES["use_tcu_gears"]:
            signals += [
                ("CUR_GR", "TCU12", 0),
            ]
        elif CP.carFingerprint in FEATURES["use_elect_gears"]:
            signals += [
                ("Elect_Gear_Shifter", "ELECT_GEAR", 0),
            ]
        else:
            signals += [
                ("CF_Lvr_Gear", "LVR12", 0),
            ]
        if CP.carFingerprint not in FEATURES["use_elect_ems"]:
            signals += [
                ("PV_AV_CAN", "EMS12", 0),
                ("CF_Ems_AclAct", "EMS16", 0),
            ]
            checks += [
                ("EMS12", 100),
                ("EMS16", 100),
            ]
        else:
            signals += [
                ("Accel_Pedal_Pos", "E_EMS11", 0),
                ("Brake_Pedal_Pos", "E_EMS11", 0),
            ]
            checks += [
                ("E_EMS11", 100),
            ]
        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 0)
Esempio n. 25
0
    def get_can_parser(CP):
        signals = [
            # sig_name, sig_address, default
            ("WHL_SPD_FL", "WHL_SPD11", 0),
            ("WHL_SPD_FR", "WHL_SPD11", 0),
            ("WHL_SPD_RL", "WHL_SPD11", 0),
            ("WHL_SPD_RR", "WHL_SPD11", 0),
            ("YAW_RATE", "ESP12", 0),
            ("CF_Gway_DrvSeatBeltInd", "CGW4", 1),
            ("CF_Gway_DrvSeatBeltSw", "CGW1", 0),
            ("CF_Gway_DrvDrSw", "CGW1", 0),  # Driver Door
            ("CF_Gway_AstDrSw", "CGW1", 0),  # Passenger door
            ("CF_Gway_RLDrSw", "CGW2", 0),  # Rear reft door
            ("CF_Gway_RRDrSw", "CGW2", 0),  # Rear right door
            ("CF_Gway_TSigLHSw", "CGW1", 0),
            ("CF_Gway_TurnSigLh", "CGW1", 0),
            ("CF_Gway_TSigRHSw", "CGW1", 0),
            ("CF_Gway_TurnSigRh", "CGW1", 0),
            ("CF_Gway_ParkBrakeSw", "CGW1", 0),
            ("CYL_PRES", "ESP12", 0),
            ("CF_Clu_CruiseSwState", "CLU11", 0),
            ("CF_Clu_CruiseSwMain", "CLU11", 0),
            ("CF_Clu_SldMainSW", "CLU11", 0),
            ("CF_Clu_ParityBit1", "CLU11", 0),
            ("CF_Clu_VanzDecimal", "CLU11", 0),
            ("CF_Clu_Vanz", "CLU11", 0),
            ("CF_Clu_SPEED_UNIT", "CLU11", 0),
            ("CF_Clu_DetentOut", "CLU11", 0),
            ("CF_Clu_RheostatLevel", "CLU11", 0),
            ("CF_Clu_CluInfo", "CLU11", 0),
            ("CF_Clu_AmpInfo", "CLU11", 0),
            ("CF_Clu_AliveCnt1", "CLU11", 0),
            ("ACCEnable", "TCS13", 0),
            ("BrakeLight", "TCS13", 0),
            ("DriverBraking", "TCS13", 0),
            ("DriverOverride", "TCS13", 0),
            ("ESC_Off_Step", "TCS15", 0),
            ("CF_Lvr_GearInf", "LVR11",
             0),  # Transmission Gear (0 = N or P, 1-8 = Fwd, 14 = Rev)
            ("CF_Lca_IndLeft", "LCA11", 0),
            ("CF_Lca_IndRight", "LCA11", 0),
            ("CR_Mdps_StrColTq", "MDPS12", 0),
            ("CF_Mdps_Def", "MDPS12", 0),  #
            ("CF_Mdps_ToiActive", "MDPS12", 0),
            ("CF_Mdps_ToiUnavail", "MDPS12", 0),
            ("CF_Mdps_MsgCount2", "MDPS12", 0),  #
            ("CF_Mdps_Chksum2", "MDPS12", 0),  #
            ("CF_Mdps_ToiFlt", "MDPS12", 0),  #
            ("CF_Mdps_SErr", "MDPS12", 0),  #
            ("CR_Mdps_StrTq", "MDPS12", 0),  #
            ("CF_Mdps_FailStat", "MDPS12", 0),
            ("CR_Mdps_OutTq", "MDPS12", 0),
            ("SAS_Angle", "SAS11", 0),
            ("SAS_Speed", "SAS11", 0),
            ("MainMode_ACC", "SCC11", 0),
            ("VSetDis", "SCC11", 0),
            ("SCCInfoDisplay", "SCC11", 0),
            ("ACC_ObjDist", "SCC11", 0),
            ("ACC_ObjRelSpd", "SCC11", 0),
            ("ACCMode", "SCC12", 1),
        ]

        checks = [
            # address, frequency
            ("MDPS12", 50),  # 593
            ("TCS13", 50),  # 916
            ("TCS15", 10),
            ("CLU11", 50),
            ("ESP12", 100),
            ("CGW1", 10),
            ("CGW4", 5),
            ("WHL_SPD11", 50),  # 902
            ("SAS11", 100),
            ("SCC11", 50),
            ("SCC12", 50),  # 1057
            ("LCA11", 50),
        ]

        signals, checks = CarState.get_parser_ev_hybrid(CP, signals, checks)
        signals, checks = CarState.get_parser_gears(CP, signals, checks)

        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, 0)
Esempio n. 26
0
    def get_can_parser(CP):
        signals = [
            # sig_name, sig_address, default
            ("ESP_vehicleSpeed", "ESP_B", 0),
            ("DI_pedalPos", "DI_torque1", 0),
            ("DI_brakePedal", "DI_torque2", 0),
            ("StW_AnglHP", "STW_ANGLHP_STAT", 0),
            ("StW_AnglHP_Spd", "STW_ANGLHP_STAT", 0),
            ("EPAS_handsOnLevel", "EPAS_sysStatus", 0),
            ("EPAS_torsionBarTorque", "EPAS_sysStatus", 0),
            ("EPAS_internalSAS", "EPAS_sysStatus", 0),
            ("EPAS_eacStatus", "EPAS_sysStatus", 1),
            ("EPAS_eacErrorCode", "EPAS_sysStatus", 0),
            ("DI_cruiseState", "DI_state", 0),
            ("DI_digitalSpeed", "DI_state", 0),
            ("DI_speedUnits", "DI_state", 0),
            ("DI_gear", "DI_torque2", 0),
            ("DOOR_STATE_FL", "GTW_carState", 1),
            ("DOOR_STATE_FR", "GTW_carState", 1),
            ("DOOR_STATE_RL", "GTW_carState", 1),
            ("DOOR_STATE_RR", "GTW_carState", 1),
            ("DOOR_STATE_FrontTrunk", "GTW_carState", 1),
            ("BOOT_STATE", "GTW_carState", 1),
            ("BC_indicatorLStatus", "GTW_carState", 1),
            ("BC_indicatorRStatus", "GTW_carState", 1),
            ("SDM_bcklDrivStatus", "SDM1", 0),
            ("driverBrakeStatus", "BrakeMessage", 0),

            # We copy this whole message when spamming cancel
            ("SpdCtrlLvr_Stat", "STW_ACTN_RQ", 0),
            ("VSL_Enbl_Rq", "STW_ACTN_RQ", 0),
            ("SpdCtrlLvrStat_Inv", "STW_ACTN_RQ", 0),
            ("DTR_Dist_Rq", "STW_ACTN_RQ", 0),
            ("TurnIndLvr_Stat", "STW_ACTN_RQ", 0),
            ("HiBmLvr_Stat", "STW_ACTN_RQ", 0),
            ("WprWashSw_Psd", "STW_ACTN_RQ", 0),
            ("WprWash_R_Sw_Posn_V2", "STW_ACTN_RQ", 0),
            ("StW_Lvr_Stat", "STW_ACTN_RQ", 0),
            ("StW_Cond_Flt", "STW_ACTN_RQ", 0),
            ("StW_Cond_Psd", "STW_ACTN_RQ", 0),
            ("HrnSw_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw00_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw01_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw02_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw03_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw04_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw05_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw06_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw07_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw08_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw09_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw10_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw11_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw12_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw13_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw14_Psd", "STW_ACTN_RQ", 0),
            ("StW_Sw15_Psd", "STW_ACTN_RQ", 0),
            ("WprSw6Posn", "STW_ACTN_RQ", 0),
            ("MC_STW_ACTN_RQ", "STW_ACTN_RQ", 0),
            ("CRC_STW_ACTN_RQ", "STW_ACTN_RQ", 0),
        ]

        checks = [
            # sig_address, frequency
            ("ESP_B", 50),
            ("DI_torque1", 100),
            ("DI_torque2", 100),
            ("STW_ANGLHP_STAT", 100),
            ("EPAS_sysStatus", 25),
            ("DI_state", 10),
            ("STW_ACTN_RQ", 10),
            ("GTW_carState", 10),
            ("SDM1", 10),
            ("BrakeMessage", 50),
        ]

        return CANParser(DBC[CP.carFingerprint]['chassis'], signals, checks,
                         CANBUS.chassis)
Esempio n. 27
0
    def get_cam_can_parser(CP):

        signals = [
            # sig_name, sig_address, default
            ("CF_Lkas_LdwsActivemode", "LKAS11", 0),
            ("CF_Lkas_LdwsSysState", "LKAS11", 0),
            ("CF_Lkas_SysWarning", "LKAS11", 0),
            ("CF_Lkas_LdwsLHWarning", "LKAS11", 0),
            ("CF_Lkas_LdwsRHWarning", "LKAS11", 0),
            ("CF_Lkas_HbaLamp", "LKAS11", 0),
            ("CF_Lkas_FcwBasReq", "LKAS11", 0),
            ("CF_Lkas_ToiFlt", "LKAS11", 0),
            ("CF_Lkas_HbaSysState", "LKAS11", 0),
            ("CF_Lkas_FcwOpt", "LKAS11", 0),
            ("CF_Lkas_HbaOpt", "LKAS11", 0),
            ("CF_Lkas_FcwSysState", "LKAS11", 0),
            ("CF_Lkas_FcwCollisionWarning", "LKAS11", 0),
            ("CF_Lkas_MsgCount", "LKAS11", 0),
            ("CF_Lkas_FusionState", "LKAS11", 0),
            ("CF_Lkas_FcwOpt_USM", "LKAS11", 0),
            ("CF_Lkas_LdwsOpt_USM", "LKAS11", 0)
        ]

        checks = [("LKAS11", 100)]
        if CP.sccBus == 2:
            signals += [
                ("MainMode_ACC", "SCC11", 0),
                ("SCCInfoDisplay", "SCC11", 0),
                ("AliveCounterACC", "SCC11", 0),
                ("VSetDis", "SCC11", 0),
                ("ObjValid", "SCC11", 0),
                ("DriverAlertDisplay", "SCC11", 0),
                ("TauGapSet", "SCC11", 4),
                ("ACC_ObjStatus", "SCC11", 0),
                ("ACC_ObjLatPos", "SCC11", 0),
                ("ACC_ObjDist", "SCC11", 150.),
                ("ACC_ObjRelSpd", "SCC11", 0),
                ("Navi_SCC_Curve_Status", "SCC11", 0),
                ("Navi_SCC_Curve_Act", "SCC11", 0),
                ("Navi_SCC_Camera_Act", "SCC11", 0),
                ("Navi_SCC_Camera_Status", "SCC11", 2),
                ("ACCMode", "SCC12", 0),
                ("CF_VSM_Prefill", "SCC12", 0),
                ("CF_VSM_DecCmdAct", "SCC12", 0),
                ("CF_VSM_HBACmd", "SCC12", 0),
                ("CF_VSM_Warn", "SCC12", 0),
                ("CF_VSM_Stat", "SCC12", 0),
                ("CF_VSM_BeltCmd", "SCC12", 0),
                ("ACCFailInfo", "SCC12", 0),
                ("StopReq", "SCC12", 0),
                ("CR_VSM_DecCmd", "SCC12", 0),
                ("aReqRaw", "SCC12", 0),
                ("TakeOverReq", "SCC12", 0),
                ("PreFill", "SCC12", 0),
                ("aReqValue", "SCC12", 0),
                ("CF_VSM_ConfMode", "SCC12", 1),
                ("AEB_Failinfo", "SCC12", 0),
                ("AEB_Status", "SCC12", 2),
                ("AEB_CmdAct", "SCC12", 0),
                ("AEB_StopReq", "SCC12", 0),
                ("CR_VSM_Alive", "SCC12", 0),
                ("CR_VSM_ChkSum", "SCC12", 0),
                ("SCCDrvModeRValue", "SCC13", 2),
                ("SCC_Equip", "SCC13", 1),
                ("AebDrvSetStatus", "SCC13", 0),
                ("JerkUpperLimit", "SCC14", 0),
                ("JerkLowerLimit", "SCC14", 0),
                ("SCCMode2", "SCC14", 0),
                ("ComfortBandUpper", "SCC14", 0),
                ("ComfortBandLower", "SCC14", 0),
                ("ACCMode", "SCC14", 0),
                ("ObjGap", "SCC14", 0),
                ("CF_VSM_Prefill", "FCA11", 0),
                ("CF_VSM_HBACmd", "FCA11", 0),
                ("CF_VSM_Warn", "FCA11", 0),
                ("CF_VSM_BeltCmd", "FCA11", 0),
                ("CR_VSM_DecCmd", "FCA11", 0),
                ("FCA_Status", "FCA11", 2),
                ("FCA_CmdAct", "FCA11", 0),
                ("FCA_StopReq", "FCA11", 0),
                ("FCA_DrvSetStatus", "FCA11", 1),
                ("CF_VSM_DecCmdAct", "FCA11", 0),
                ("FCA_Failinfo", "FCA11", 0),
                ("FCA_RelativeVelocity", "FCA11", 0),
                ("FCA_TimetoCollision", "FCA11", 2540.),
                ("CR_FCA_Alive", "FCA11", 0),
                ("CR_FCA_ChkSum", "FCA11", 0),
                ("Supplemental_Counter", "FCA11", 0),
                ("PAINT1_Status", "FCA11", 1),
            ]
            if CP.sccBus == 2:
                checks += [
                    ("SCC11", 50),
                    ("SCC12", 50),
                ]
                if CP.fcaBus == 2:
                    checks += [("FCA11", 50)]

        return CANParser(DBC[CP.carFingerprint]['pt'],
                         signals,
                         checks,
                         2,
                         enforce_checks=False)
Esempio n. 28
0
 def get_can_parser_init(CP):
     signals, checks = get_can_signals(CP)
     bus_pt = 1 if CP.isPandaBlack and CP.carFingerprint in HONDA_BOSCH else 0
     return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks, bus_pt)
Esempio n. 29
0
    def get_can_parser(CP):
        # this function generates lists for signal, messages and initial values
        signals = [
            # sig_name, sig_address, default
            ("EPS_Berechneter_LW", "LH_EPS_03", 0),  # Absolute steering angle
            ("EPS_VZ_BLW", "LH_EPS_03", 0),  # Steering angle sign
            ("LWI_Lenkradw_Geschw", "LWI_01", 0),  # Absolute steering rate
            ("LWI_VZ_Lenkradw_Geschw", "LWI_01", 0),  # Steering rate sign
            ("ESP_VL_Radgeschw_02", "ESP_19",
             0),  # ABS wheel speed, front left
            ("ESP_VR_Radgeschw_02", "ESP_19",
             0),  # ABS wheel speed, front right
            ("ESP_HL_Radgeschw_02", "ESP_19", 0),  # ABS wheel speed, rear left
            ("ESP_HR_Radgeschw_02", "ESP_19",
             0),  # ABS wheel speed, rear right
            ("ESP_Gierrate", "ESP_02", 0),  # Absolute yaw rate
            ("ESP_VZ_Gierrate", "ESP_02", 0),  # Yaw rate sign
            ("ZV_FT_offen", "Gateway_72", 0),  # Door open, driver
            ("ZV_BT_offen", "Gateway_72", 0),  # Door open, passenger
            ("ZV_HFS_offen", "Gateway_72", 0),  # Door open, rear left
            ("ZV_HBFS_offen", "Gateway_72", 0),  # Door open, rear right
            ("ZV_HD_offen", "Gateway_72", 0),  # Trunk or hatch open
            ("BH_Blinker_li", "Gateway_72", 0),  # Left turn signal on
            ("BH_Blinker_re", "Gateway_72", 0),  # Right turn signal on
            ("AB_Gurtschloss_FA", "Airbag_02", 0),  # Seatbelt status, driver
            ("AB_Gurtschloss_BF", "Airbag_02",
             0),  # Seatbelt status, passenger
            ("ESP_Fahrer_bremst", "ESP_05", 0),  # Brake pedal pressed
            ("ESP_Bremsdruck", "ESP_05", 0),  # Brake pressure applied
            ("MO_Fahrpedalrohwert_01", "Motor_20",
             0),  # Accelerator pedal value
            ("MO_Kuppl_schalter", "Motor_14", 0),  # Clutch switch
            ("EPS_Lenkmoment", "LH_EPS_03", 0),  # Absolute driver torque input
            ("EPS_VZ_Lenkmoment", "LH_EPS_03", 0),  # Driver torque input sign
            ("EPS_HCA_Status", "LH_EPS_03",
             0),  # Steering rack HCA support configured
            ("ESP_Tastung_passiv", "ESP_21", 0),  # Stability control disabled
            ("KBI_MFA_v_Einheit_02", "Einheiten_01",
             0),  # MPH vs KMH speed display
            ("KBI_Handbremse", "Kombi_01", 0),  # Manual handbrake applied
            ("TSK_Status", "TSK_06",
             0),  # ACC engagement status from drivetrain coordinator
            ("GRA_Hauptschalter", "GRA_ACC_01", 0),  # ACC button, on/off
            ("GRA_Abbrechen", "GRA_ACC_01", 0),  # ACC button, cancel
            ("GRA_Tip_Setzen", "GRA_ACC_01", 0),  # ACC button, set
            ("GRA_Tip_Hoch", "GRA_ACC_01", 0),  # ACC button, increase or accel
            ("GRA_Tip_Runter", "GRA_ACC_01",
             0),  # ACC button, decrease or decel
            ("GRA_Tip_Wiederaufnahme", "GRA_ACC_01", 0),  # ACC button, resume
            ("GRA_Verstellung_Zeitluecke", "GRA_ACC_01",
             0),  # ACC button, time gap adj
            ("GRA_Typ_Hauptschalter", "GRA_ACC_01", 0),  # ACC main button type
            ("GRA_Tip_Stufe_2", "GRA_ACC_01",
             0),  # unknown related to stalk type
            ("GRA_ButtonTypeInfo", "GRA_ACC_01",
             0),  # unknown related to stalk type
            ("COUNTER", "GRA_ACC_01", 0),  # GRA_ACC_01 CAN message counter
        ]

        checks = [
            # sig_address, frequency
            ("LWI_01", 100
             ),  # From J500 Steering Assist with integrated sensors
            ("LH_EPS_03",
             100),  # From J500 Steering Assist with integrated sensors
            ("ESP_19", 100),  # From J104 ABS/ESP controller
            ("ESP_05", 50),  # From J104 ABS/ESP controller
            ("ESP_21", 50),  # From J104 ABS/ESP controller
            ("Motor_20", 50),  # From J623 Engine control module
            ("TSK_06", 50),  # From J623 Engine control module
            ("ESP_02", 50),  # From J104 ABS/ESP controller
            ("GRA_ACC_01", 33
             ),  # From J533 CAN gateway (via LIN from steering wheel controls)
            ("Gateway_72", 10),  # From J533 CAN gateway (aggregated data)
            ("Motor_14", 10),  # From J623 Engine control module
            ("Airbag_02", 5),  # From J234 Airbag control module
            ("Kombi_01", 2),  # From J285 Instrument cluster
            ("Einheiten_01",
             1),  # From J??? not known if gateway, cluster, or BCM
        ]

        if CP.transmissionType == TransmissionType.automatic:
            signals += [("GE_Fahrstufe", "Getriebe_11", 0)
                        ]  # Auto trans gear selector position
            checks += [("Getriebe_11", 20)
                       ]  # From J743 Auto transmission control module
        elif CP.transmissionType == TransmissionType.direct:
            signals += [("GearPosition", "EV_Gearshift", 0)
                        ]  # EV gear selector position
            checks += [("EV_Gearshift", 10)
                       ]  # From J??? unknown EV control module
        elif CP.transmissionType == TransmissionType.manual:
            signals += [
                ("MO_Kuppl_schalter", "Motor_14", 0),  # Clutch switch
                ("BCM1_Rueckfahrlicht_Schalter", "Gateway_72", 0)
            ]  # Reverse light from BCM
            checks += [("Motor_14", 10)]  # From J623 Engine control module

        # TODO: Detect ACC radar bus location
        signals += MqbExtraSignals.fwd_radar_signals
        checks += MqbExtraSignals.fwd_radar_checks
        # TODO: Detect BSM radar bus location
        if CP.enableBsm:
            signals += MqbExtraSignals.bsm_radar_signals
            checks += MqbExtraSignals.bsm_radar_checks

        return CANParser(DBC[CP.carFingerprint]['pt'], signals, checks,
                         CANBUS.pt)
Esempio n. 30
0
    def get_can_parser(CP):
        signals = [
            # sig_name, sig_address
            ("Veh_V_ActlEng", "EngVehicleSpThrottle2"
             ),  # ABS vehicle speed (kph)
            ("VehYaw_W_Actl", "Yaw_Data_FD1"),  # ABS vehicle yaw rate (rad/s)
            ("VehStop_D_Stat", "DesiredTorqBrk"),  # ABS vehicle stopped
            ("PrkBrkStatus", "DesiredTorqBrk"),  # ABS park brake status
            ("ApedPos_Pc_ActlArb",
             "EngVehicleSpThrottle"),  # PCM throttle (pct)
            ("BrkTot_Tq_Actl", "BrakeSnData_4"),  # ABS brake torque (Nm)
            ("BpedDrvAppl_D_Actl",
             "EngBrakeData"),  # PCM driver brake pedal pressed
            ("Veh_V_DsplyCcSet", "EngBrakeData"),  # PCM ACC set speed (mph)
            # The units might change with IPC settings?
            ("CcStat_D_Actl", "EngBrakeData"),  # PCM ACC status
            ("StePinComp_An_Est",
             "SteeringPinion_Data"),  # PSCM estimated steering angle (deg)
            # Calculates steering angle (and offset) from pinion
            # angle and driving measurements.
            # StePinRelInit_An_Sns is the pinion angle, initialised
            # to zero at the beginning of the drive.
            ("SteeringColumnTorque", "EPAS_INFO"
             ),  # PSCM steering column torque (Nm)
            ("EPAS_Failure", "EPAS_INFO"),  # PSCM EPAS status
            ("LaHandsOff_B_Actl",
             "Lane_Assist_Data3_FD1"),  # PSCM LKAS hands off wheel
            ("TurnLghtSwtch_D_Stat",
             "Steering_Data_FD1"),  # SCCM Turn signal switch
            ("TjaButtnOnOffPress", "Steering_Data_FD1"
             ),  # SCCM ACC button, lane-centering/traffic jam assist toggle
            ("DrStatDrv_B_Actl", "BodyInfo_3_FD1"),  # BCM Door open, driver
            ("DrStatPsngr_B_Actl",
             "BodyInfo_3_FD1"),  # BCM Door open, passenger
            ("DrStatRl_B_Actl", "BodyInfo_3_FD1"),  # BCM Door open, rear left
            ("DrStatRr_B_Actl", "BodyInfo_3_FD1"),  # BCM Door open, rear right
            ("FirstRowBuckleDriver",
             "RCMStatusMessage2_FD1"),  # RCM Seatbelt status, driver
        ]

        checks = [
            # sig_address, frequency
            ("EngVehicleSpThrottle2", 50),
            ("Yaw_Data_FD1", 100),
            ("DesiredTorqBrk", 50),
            ("EngVehicleSpThrottle", 100),
            ("BrakeSnData_4", 50),
            ("EngBrakeData", 10),
            ("SteeringPinion_Data", 100),
            ("EPAS_INFO", 50),
            ("Lane_Assist_Data3_FD1", 33),
            ("Steering_Data_FD1", 10),
            ("BodyInfo_3_FD1", 2),
            ("RCMStatusMessage2_FD1", 10),
        ]

        if CP.transmissionType == TransmissionType.automatic:
            signals += [
                ("TrnGear_D_RqDrv",
                 "Gear_Shift_by_Wire_FD1"),  # GWM transmission gear position
            ]
            checks += [
                ("Gear_Shift_by_Wire_FD1", 10),
            ]
        elif CP.transmissionType == TransmissionType.manual:
            signals += [
                ("CluPdlPos_Pc_Meas",
                 "Engine_Clutch_Data"),  # PCM clutch (pct)
                ("RvrseLghtOn_B_Stat",
                 "BCM_Lamp_Stat_FD1"),  # BCM reverse light
            ]
            checks += [
                ("Engine_Clutch_Data", 33),
                ("BCM_Lamp_Stat_FD1", 1),
            ]

        if CP.enableBsm:
            signals += [
                ("SodDetctLeft_D_Stat",
                 "Side_Detect_L_Stat"),  # Blindspot sensor, left
                ("SodDetctRight_D_Stat",
                 "Side_Detect_R_Stat"),  # Blindspot sensor, right
            ]
            checks += [
                ("Side_Detect_L_Stat", 5),
                ("Side_Detect_R_Stat", 5),
            ]

        return CANParser(DBC[CP.carFingerprint]["pt"], signals, checks,
                         CANBUS.main)