def integration_formatted(savefile="example_formatted.png"):
wire_options = {"color": "indigo", "linewidth": 4}
drawer = MPLDrawer(n_wires=2, n_layers=4, wire_options=wire_options)
label_options = {"fontsize": "x-large", "color": "indigo"}
drawer.label(["0", "a"], text_options=label_options)
box_options = {"facecolor": "lightcoral", "edgecolor": "maroon", "linewidth": 5}
text_options = {"fontsize": "xx-large", "color": "maroon"}
drawer.box_gate(layer=0, wires=0, text="Z", box_options=box_options, text_options=text_options)
swap_options = {"linewidth": 4, "color": "darkgreen"}
drawer.SWAP(layer=1, wires=(0, 1), options=swap_options)
ctrl_options = {"linewidth": 4, "color": "teal"}
drawer.CNOT(layer=2, wires=(0, 1), options=ctrl_options)
drawer.ctrl(layer=3, wires=(0, 1), options=ctrl_options)
measure_box = {"facecolor": "white", "edgecolor": "indigo"}
measure_lines = {"edgecolor": "indigo", "facecolor": "plum", "linewidth": 2}
for wire in range(2):
drawer.measure(layer=4, wires=wire, box_options=measure_box, lines_options=measure_lines)
drawer.fig.suptitle("My Circuit", fontsize="xx-large")
plt.savefig(folder / savefile)
plt.close()
def integration(style="default", savefile="example_basic.png"):
use_style(style)
drawer = MPLDrawer(n_wires=5, n_layers=6)
drawer.label(["0", "a", r"$|\Psi\rangle$", r"$|\theta\rangle$", "aux"])
drawer.box_gate(0, [0, 1, 2, 3, 4], "Entangling Layers")
drawer.box_gate(1, [0, 2, 3], "U(θ)")
drawer.box_gate(1, 4, "Z")
drawer.SWAP(2, (3,4))
drawer.CNOT(2, (0, 2))
drawer.ctrl(3, [1, 3], control_values=[True, False])
drawer.box_gate(
layer=3, wires=2, text="H", box_options={"zorder": 4}, text_options={"zorder": 5}
)
drawer.ctrl(4, [1, 2])
drawer.measure(5, 0)
drawer.fig.suptitle("My Circuit", fontsize="xx-large")
plt.savefig(folder / savefile)
plt.style.use("default")
plt.close()
def test_ctrl_control_values_error(self):
"""Tests a ValueError is raised if different number of wires and control_values."""
drawer = MPLDrawer(1, 2)
with pytest.raises(ValueError,
match="`control_values` must be the same length"):
drawer.ctrl(0, (0, 1), control_values=True)
plt.close()
def test_ctrl_on_zero(self):
"""Tests a control on zero circle is open"""
drawer = MPLDrawer(1, 1)
drawer.ctrl(0, 0, control_values=False)
circ = drawer.ax.patches[0]
assert circ.get_facecolor() == to_rgba(plt.rcParams["axes.facecolor"])
assert circ.get_edgecolor() == to_rgba(plt.rcParams["lines.color"])
assert circ.get_linewidth() == plt.rcParams["lines.linewidth"]
assert circ.center == (0, 0)
assert circ.width == 0.2
def test_ctrl_no_target(self):
"""Tests a single control with no target"""
drawer = MPLDrawer(1, 1)
drawer.ctrl(0, 0)
ctrl_line = drawer.ax.lines[1]
assert ctrl_line.get_data() == ((0, 0), (0, 0))
assert len(drawer.ax.patches) == 1
circle = drawer.ax.patches[0]
assert circle.width == 0.2
assert circle.center == (0, 0)
plt.close()
def test_ctrl_target(self):
"""Tests target impacts line extent"""
drawer = MPLDrawer(1, 3)
drawer.ctrl(0, 0, 2)
ctrl_line = drawer.ax.lines[3]
assert ctrl_line.get_data() == ((0, 0), (0, 2))
circles = drawer.ax.patches
assert len(circles) == 1
circle = drawer.ax.patches[0]
assert circle.width == 0.2
assert circle.center == (0, 0)
plt.close()
def test_ctrl_multi_wires(self):
"""Tests two control wires with no target."""
drawer = MPLDrawer(1, 3)
ctrl_wires = (0, 1)
drawer.ctrl(0, ctrl_wires)
ctrl_line = drawer.ax.lines[3]
assert ctrl_line.get_data() == ((0, 0), ctrl_wires)
circles = drawer.ax.patches
assert len(circles) == 2
for wire, circle in zip(ctrl_wires, circles):
assert circle.width == 0.2
assert circle.center == (0, wire)
plt.close()
def integration_rcParams(savefile="example_rcParams.png"):
plt.rcParams['patch.facecolor'] = 'mistyrose'
plt.rcParams['patch.edgecolor'] = 'maroon'
plt.rcParams['text.color'] = 'maroon'
plt.rcParams['font.weight'] = 'bold'
plt.rcParams['patch.linewidth'] = 4
plt.rcParams['patch.force_edgecolor'] = True
plt.rcParams['lines.color'] = 'indigo'
plt.rcParams['lines.linewidth'] = 5
plt.rcParams['figure.facecolor'] = 'ghostwhite'
drawer = MPLDrawer(n_wires=5, n_layers=5)
drawer = MPLDrawer(n_wires=5, n_layers=6)
drawer.label(["0", "a", r"$|\Psi\rangle$", r"$|\theta\rangle$", "aux"])
drawer.box_gate(0, [0, 1, 2, 3, 4], "Entangling Layers")
drawer.box_gate(1, [0, 2, 3], "U(θ)")
drawer.box_gate(1, 4, "Z")
drawer.SWAP(2, (3,4))
drawer.CNOT(2, (0, 2))
drawer.ctrl(3, [1, 3], control_values=[True, False])
drawer.box_gate(
layer=3, wires=2, text="H", box_options={"zorder": 4}, text_options={"zorder": 5}
)
drawer.ctrl(4, [1, 2])
drawer.measure(5, 0)
drawer.fig.suptitle("My Circuit", fontsize="xx-large")
plt.savefig(folder / savefile)
plt.style.use("default")
plt.close()
def test_ctrl_formatting(self):
"""Tests two control wires with no target."""
drawer = MPLDrawer(1, 3)
ctrl_wires = (0, 1)
rgba_red = (1, 0, 0, 1)
options = {"color": rgba_red, "linewidth": 4}
drawer.ctrl(0, ctrl_wires, control_values=[1, 0], options=options)
ctrl_line = drawer.ax.lines[3]
assert ctrl_line.get_color() == rgba_red
assert ctrl_line.get_linewidth() == 4
closed_circ = drawer.ax.patches[0]
assert closed_circ.get_facecolor() == rgba_red
open_circ = drawer.ax.patches[1]
assert open_circ.get_edgecolor() == rgba_red
assert open_circ.get_facecolor() == to_rgba(
plt.rcParams["axes.facecolor"])
assert open_circ.get_linewidth() == 4
plt.close()
def ctrl(savefile="ctrl.png"):
drawer = MPLDrawer(n_wires=2, n_layers=3)
drawer.ctrl(layer=0, wires=0, wires_target=1)
drawer.ctrl(layer=1, wires=(0, 1), control_values=[0, 1])
options = {"color": "indigo", "linewidth": 4}
drawer.ctrl(layer=2, wires=(0, 1), control_values=[1, 0], options=options)
plt.savefig(folder / savefile)
plt.close()
