def run(self):
while True:
now = datetime.datetime.now()
time1 = now.strftime("%d %B %Y at %H:%M:%S")
with SHT1x(18, 23, gpio_mode=GPIO.BCM) as sensor:
config = {
"apiKey": "Enter your api key here",
"authDomain": "Enter your auth domain here",
"databaseURL": "Enter database URL here",
"projectId": "Enter Project ID",
"storageBucket": "Enter storage bucket",
"messagingSenderId": "Enter ms_id"
}
firebase = pyrebase.initialize_app(config)
auth = firebase.auth()
db = firebase.database()
user = auth.sign_in_with_email_and_password(
userEmail, userPass)
temp = sensor.read_temperature()
hum = sensor.read_humidity(temp)
dew1 = sensor.calculate_dew_point(temp, hum)
data = {
'Time Batch': time1,
'Temperature': temp,
'Humidity': hum,
'Dew Point': dew1
}
result = db.child("pol2").child("SHT10").push(
data, user['idToken'])
print(str(result))
self.signal.emit()
sleep(5)
QApplication.processEvents()
def sensor_sensing():
# 개발용 - 온습도 현제 시간으로
# now = datetime.datetime.now()
t = rh = None
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM) as sensor:
t = sensor.read_temperature()
rh = sensor.read_humidity(t)
return [t, rh]
def test_sht1x(DATA_PIN, SCK_PIN):
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BOARD) as sensor:
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
sensor.calculate_dew_point(temp, humidity)
print(temp,humidity)
return temp, humidity
sleep(2)
print('Test complete.\n')
def sht_indoor_sensor(in_temp_f, in_temp_c, in_hum, verb):
#Get readings from indoor SHT1 sensor
with SHT1x(24, 23, gpio_mode=GPIO.BCM) as sensor:
in_temp_c = sensor.read_temperature()
in_temp_f = sensor.read_temperature()
in_hum = sensor.read_humidity(in_temp_c)
sensor.calculate_dew_point(in_temp_c, in_hum)
in_temp_f = c_to_f(in_temp_f)
if verb:
print('Indoor readings:\n', sensor)
return in_temp_f, in_temp_c, in_hum
def sht_outdoor_sensor(out_temp_f, out_temp_c, out_hum, verb):
#Get readings from outdoor SHT1 Sensor
with SHT1x(22, 27, gpio_mode=GPIO.BCM) as sensor:
out_temp_c = sensor.read_temperature()
out_temp_f = sensor.read_temperature()
out_hum = sensor.read_humidity(out_temp_c)
sensor.calculate_dew_point(out_temp_c, out_hum)
out_temp_f = c_to_f(out_temp_f)
if verb:
print('Outdoor readings:\n', sensor)
return out_temp_f, out_temp_c, out_hum
def read_sensor(data_pin, clock_pin):
"""
Reads sensor values and returns tuple of (temperature, humidity, dew_point)
"""
with SHT1x(data_pin, clock_pin, gpio_mode=GPIO.BCM) as sensor:
temperature = sensor.read_temperature()
humidity = sensor.read_humidity(temperature)
dew_point = sensor.calculate_dew_point(temperature, humidity)
# print(sensor)
temperature = temperature * 9 / 5.0 + 32
dew_point = dew_point * 9 / 5.0 + 32
return (temperature, humidity, dew_point)
def get_soil_sensor_dic():
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM) as sensor:
logger.setLevel(LOG_LEVEL)
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
dew_point = sensor.calculate_dew_point(temp, humidity)
# print(sensor)
now = get_now_timestamp()
out_dic = {
COL_TEMP: temp,
COL_HUMIDITY: humidity,
COL_DEW_POINT: dew_point,
COL_DT_SECS: timestamp2unix(now)
}
return out_dic
def read_and_save_data():
while True:
with SHT1x(data_pin=DATA_PIN, sck_pin=SCX_PIN,
gpio_mode=GPIO.BCM) as sensor:
temperature_readings = []
humidity_readings = []
for reading_num in range(NUM_OF_READINGS):
temperature_readings.append(sensor.read_temperature())
humidity_readings.append(sensor.read_humidity())
time.sleep(1)
redis_conn = get_redis_connection()
save_readings(redis_conn,
statistics.median_grouped(temperature_readings),
statistics.median_grouped(humidity_readings))
time.sleep(READINGS_INTERVAL)
def finished(self):
with SHT1x(18, 23, gpio_mode=GPIO.BCM) as sensor:
temp = sensor.read_temperature()
hum = sensor.read_humidity(temp)
dew1 = sensor.calculate_dew_point(temp, hum)
now = datetime.datetime.now()
time1 = now.strftime("%d %B %Y at %H:%M:%S")
self.textEdit.append(
str(time1) + " , " + str(temp) + "°C, " + str(hum) + "%, " +
str(dew1) + "°C \n")
self.textEdit.moveCursor(QtGui.QTextCursor.End)
self.lineEdit_5.setText(str(time1))
self.lineEdit_6.setText(str(temp) + "°C")
self.lineEdit_10.setText(str(hum) + "%")
self.lineEdit_11.setText(str(dew1) + "°C")
def readTempIn():
print("read tempIn")
try:
with SHT1x(18, 23, gpio_mode=GPIO.BCM) as sensor:
tempIn = sensor.read_temperature()
humidityIn = sensor.read_humidity(tempIn)
newData[2] = (int(tempIn * 10)) / 10
newData[3] = int(humidityIn)
if oldData[2] != newData[2]:
oldData[2] = newData[2]
if oldData[3] != newData[3]:
oldData[3] = newData[3]
except:
print("error SHT read temp")
finally:
print("done ReadTempIn")
def data_Transmitting(self):
illum = self.analog_read(0)
time.sleep(1)
try :
sensor = SHT1x(26, 20, gpio_mode=GPIO.BCM)
temp, humi = self.i2c_read(sensor, "all")
finally:
print("gpio clean up")
GPIO.cleanup()
self.db = pymysql.connect(host=self.url, port=3306, user=self.id, passwd=self.password, db=self.dbName,
charset='utf8')
self.cursor = self.db.cursor()
sql = "INSERT INTO `sensor_data` (`temp`, `humi`, `illum`, `time`) VALUES ('" + str(temp) + "', '" + str(humi) + "', '" + str(illum) + "', CURRENT_TIMESTAMP);"
print(sql)
self.cursor.execute(sql)
self.db.commit()
self.db.close()
def run(self, path):
path += '/'
dev = AtomDevice(path + 'rpi.ini', path + 'logger.json')
info = dev.scan_network(10000)
dev.update(info)
#if dev.update(info):
# dev.register()
logger = dev.get_logger()
with SHT1x(13, 11) as s:
while True:
try:
t = s.read_temperature()
h = s.read_humidity(t)
logger.info('Temperature: %f, Humidity: %f', t, h)
sleep(1)
except SHT1xError as e:
logger.error(e)
from pi_sht1x import SHT1x
import RPi.GPIO as GPIO
with SHT1x(6, 12, gpio_mode=GPIO.BCM) as sensor:
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
sensor.calculate_dew_point(temp, humidity)
print(sensor)
def __init__(self):
self._setup_config()
try:
mqttServer = self.config_object.get("SERVER_CONFIG",
"MQTT_SERVER",
fallback="127.0.0.1")
mqttPort = self.config_object.getint("SERVER_CONFIG",
"MQTT_PORT",
fallback=1883)
mqttTopic = self.config_object.get("SERVER_CONFIG",
"MQTT_TOPIC",
fallback="home/plant")
client_keepalive = self.config_object.getint("SERVER_CONFIG",
"CLIENT_KEEPALIVE",
fallback=60)
mqttUseUsernamePWAuth = self.config_object.getboolean(
"SERVER_CONFIG", "MQTT_USE_USERNAME_PW_AUTH", fallback=False)
if (mqttUseUsernamePWAuth):
mqttUsername = self.config_object.get("SERVER_CONFIG",
"MQTT_USERNAME",
fallback="raspberrySoil")
mqttPW = self.config_object.get("SERVER_CONFIG",
"MQTT_PASSWORD")
dataGatheringInterval = self.config_object.getint(
"GENERAL_CONFIG", "DATA_GATHERING_INTERVAL", fallback=5)
writeToCSV = self.config_object.getboolean("GENERAL_CONFIG",
"WRITE_TO_CSV_FILE",
fallback=False)
verboseOutput = self.config_object.getboolean("GENERAL_CONFIG",
"VERBOSE_OUTPUT",
fallback=False)
useRelay = self.config_object.getboolean("GENERAL_CONFIG",
"USE_RELAY",
fallback=False)
humidityMinThreshold = self.config_object.getfloat(
"GENERAL_CONFIG", "RELAY_HUMIDITY_MIN_THRESHOLD", fallback=0.0)
humidityMaxThreshold = self.config_object.getfloat(
"GENERAL_CONFIG",
"RELAY_HUMIDITY_MAX_THRESHOLD",
fallback=50.0)
data_pin = self.config_object.getint("GPIO_CONFIG",
"DATA_PIN",
fallback=24)
sck_pin = self.config_object.getint("GPIO_CONFIG",
"SCK_PIN",
fallback=23)
self.relay_pin = self.config_object.getint("GPIO_CONFIG",
"RELAY_PIN",
fallback=18)
except KeyError as kError:
raise Exception(
colored(
"Configuration Error: Key {0} not found in config file.".
format(kError), 'red'))
if mqttServer and mqttTopic:
print(
colored("-------------------------------------------------",
'cyan'))
print(colored("Rasperry Soil Sensor Data Publisher", 'magenta'))
print(
colored("-------------------------------------------------",
'cyan'))
print(("[i] Using MQTT server " + colored("{}", 'yellow') +
" on port " + colored("{}", 'yellow')).format(
mqttServer, mqttPort))
print("[i] Channel: " + colored("{}", 'yellow').format(mqttTopic))
print("[i] Using user: "******"{}", 'yellow').format(mqttUsername))
print()
client = mqttClient.Client()
if (mqttUseUsernamePWAuth):
client.username_pw_set(mqttUsername, mqttPW)
client.on_connect = self._on_connect
client.on_message = self._on_message
client.connect(mqttServer, mqttPort, client_keepalive)
GPIO.setmode(GPIO.BCM)
GPIO.setup(self.relay_pin, GPIO.OUT)
with SHT1x(data_pin, sck_pin, gpio_mode=GPIO.BCM) as sensor:
if (writeToCSV):
fields = ['Temp', 'Humidity']
filename = "measurements.csv"
csvfile = open(filename, 'w')
try:
csvwriter = csv.writer(csvfile, delimiter=';')
csvwriter.writerow(fields)
finally:
csvfile.close()
try:
print(
colored("Sensor is collecting and sending data...",
'green'))
while 1:
if self.debug:
temp = 12.65 + random.randint(1, 18)
humidity = 35.102 + random.randint(1, 10)
else:
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
#sensor.calculate_dew_point(temp, humidity)
jsonData = json.dumps({
"temperature":
temp,
"humidity":
humidity,
"relay_is_active":
self.relay_is_active
})
if (verboseOutput):
print(
self.get_formatted_current_datetime_string() +
" " + jsonData)
if (useRelay):
if (humidity >= humidityMinThreshold
and humidity <= humidityMaxThreshold):
if (not self.relay_is_active):
GPIO.output(self.relay_pin,
GPIO.HIGH) # activate relay
self.relay_is_active = True
self.relayStartTime = datetime.now()
self.relayCurrentTime = self.relayStartTime
print(
self.
get_formatted_current_datetime_string(
) + " " +
colored("Relay set active...", 'green')
)
else:
if (self.relay_is_active):
self._stop_relay(log=True)
client.publish(mqttTopic, jsonData) # MQTT publish
if (writeToCSV):
with open(filename, 'a+') as csvfile:
csvwriter = csv.writer(csvfile, delimiter=';')
fields = [temp, humidity]
csvwriter.writerow(fields)
sleep(dataGatheringInterval)
except (KeyboardInterrupt, SystemExit):
print()
print(
colored("Received keyboard interrupt, quitting ...",
'red'))
if (useRelay and self.relay_is_active):
self._stop_relay(log=True)
print("Closing connection..")
from time import sleep
import RPi.GPIO as GPIO
from pi_sht1x import SHT1x
# With BCM the pin numbering should match the GPIO header.
#gpio_mode = GPIO.BOARD
gpio_mode = GPIO.BCM
data_pin = 17
clock_pin = 14
with SHT1x(data_pin, clock_pin, gpio_mode=gpio_mode) as sensor:
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
sensor.calculate_dew_point(temp, humidity)
print(sensor)
def main():
print(
'Test: using default values: 3.5V, High resolution, no heater, otp_no_reload off, CRC checking enabled...'
)
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM) as sensor:
for i in range(5):
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
sensor.calculate_dew_point(temp, humidity)
print(sensor)
sleep(2)
print('Test complete.\n')
print(
'Test: reading all measurements using GPIO.BCM mode, 3V, High resolution, heater off, otp_no_reload off, '
'and CRC check on.')
with SHT1x(DATA_PIN,
SCK_PIN,
gpio_mode=GPIO.BCM,
vdd='3.5V',
resolution='High',
heater=False,
otp_no_reload=False,
crc_check=True) as sensor:
for i in range(5):
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
sensor.calculate_dew_point(temp, humidity)
print(sensor)
sleep(2)
print('Test complete.\n')
print(
'Test: read humidity without providing the temperature as an argument...'
)
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM) as sensor:
for i in range(5):
sensor.read_humidity()
print('Temperature: {0}°C [{1}°F]\nHumidity: {2}'.format(
sensor.temperature_celsius, sensor.temperature_fahrenheit,
sensor.humidity))
sleep(2)
print('Test complete.\n')
print(
'Test: calculate dew point without providing temperature and humidity as arguments...'
)
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM) as sensor:
for i in range(5):
sensor.calculate_dew_point()
print(sensor)
sleep(2)
print('Test complete.\n')
print('Test: turn otp_no_reload on...')
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM,
otp_no_reload=True) as sensor:
for i in range(5):
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
sensor.calculate_dew_point(temp, humidity)
print(sensor)
sleep(2)
print('Test complete.\n')
print('Test: use low resolution...')
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM,
resolution='Low') as sensor:
for i in range(5):
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
sensor.calculate_dew_point(temp, humidity)
print(sensor)
sleep(2)
print('Test complete.\n')
print('Test: change resolution after object creation...')
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM) as sensor:
print('High resolution...')
for i in range(5):
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
sensor.calculate_dew_point(temp, humidity)
print(sensor)
sleep(2)
print('Complete.\n')
sensor.resolution = SHT1x.RESOLUTION['Low']
print('Low resolution...')
for i in range(5):
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
sensor.calculate_dew_point(temp, humidity)
print(sensor)
sleep(2)
print('Test complete.\n')
print('Test: Read the Status Register (default)...')
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM) as sensor:
status_register = sensor.read_status_register()
print('Status Register: {0:08b}'.format(status_register))
print('Test complete.\n')
print(
'Test: Read the Status Register (low resolution, otp_no_reload on)...')
with SHT1x(DATA_PIN,
SCK_PIN,
gpio_mode=GPIO.BCM,
resolution='Low',
otp_no_reload=True) as sensor:
status_register = sensor.read_status_register()
print('Status Register: {0:08b}'.format(status_register))
print('Test complete.\n')
print('Test: resetting the connection to the sensor...')
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM) as sensor:
sensor.reset_connection()
sensor.read_temperature()
print('Temperature: {0}°C [{1}°F]'.format(
sensor.temperature_celsius, sensor.temperature_fahrenheit))
print('Test complete.\n')
print('Test: performing a soft reset of the sensor...')
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM,
otp_no_reload=True) as sensor:
sensor.soft_reset()
status_register = sensor.read_status_register()
print('Status Register: {0:08b}'.format(status_register))
sensor.read_temperature()
print('Temperature: {0}°C [{1}°F]'.format(
sensor.temperature_celsius, sensor.temperature_fahrenheit))
print('Test complete.\n')
print('Test: resetting the status register...')
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM,
otp_no_reload=True) as sensor:
sensor.reset_status_register()
status_register = sensor.read_status_register()
print('Status Register: {0:08b}'.format(status_register))
sensor.read_temperature()
print('Temperature: {0}°C [{1}°F]'.format(
sensor.temperature_celsius, sensor.temperature_fahrenheit))
print('Test complete.\n')
print('Test: CRC disabled...')
with SHT1x(DATA_PIN,
SCK_PIN,
gpio_mode=GPIO.BCM,
vdd='3.5V',
resolution='High',
heater=False,
otp_no_reload=False,
crc_check=False) as sensor:
for i in range(5):
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
sensor.calculate_dew_point(temp, humidity)
print(sensor)
sleep(2)
print('Test complete.\n')
def measure(self):
with SHT1x(self.DATA, self.SCK, GPIO.BCM) as sensor:
tem = sensor.read_temperature()
hum = sensor.read_humidity(tem)
return tem, hum
from time import sleep
import RPi.GPIO as GPIO
from pi_sht1x import SHT1x
DATA_PIN = 18
SCK_PIN = 23
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM) as sensor:
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
sensor.calculate_dew_point(temp, humidity)
print (sensor)
sleep(2)
def getUmi():
if IS_WINDOWS:
return 35.555
with SHT1x(18, 23, gpio_mode=GPIO.BCM) as sensor:
return sensor.read_humidity()
def main():
vdd_choices = Choices(['5V', '4V', '3.5V', '3V', '2.5V'])
resolution_choices = Choices(['HIGH', 'LOW'])
parser = argparse.ArgumentParser(
description=
'Reads the temperature and relative humidity from the SHT1x series '
'of sensors using the pi_sht1x library.')
parser.add_argument('data_pin',
type=int,
metavar='data-pin',
help='Data pin used to connect to the sensor.')
parser.add_argument('sck_pin',
type=int,
metavar='sck-pin',
help='SCK pin used to connect to the sensor.')
parser.add_argument(
'-g',
'--gpio-mode',
choices=['BCM', 'BOARD'],
default='BCM',
help=
'RPi.GPIO mode used, either GPIO.BOARD or GPIO.BCM. Defaults to GPIO.BCM.'
)
parser.add_argument(
'-v',
'--vdd',
choices=vdd_choices,
default='3.5V',
help='Voltage used to power the sensor. Defaults to 3.5V.')
parser.add_argument(
'-r',
'--resolution',
choices=resolution_choices,
default='HIGH',
help=
'Resolution used by the sensor, 14/12-bit or 12-8-bit. Defaults to High.'
)
parser.add_argument(
'-e',
'--heater',
action='store_true',
help='Used to turn the internal heater on (used for calibration).')
parser.add_argument(
'-o',
'--otp-no-reload',
action='store_true',
help=
'Used to enable OTP no reload, will save about 10ms per measurement.')
parser.add_argument('-c',
'--no-crc-check',
action='store_false',
help='Performs CRC checking.')
parser.add_argument('-d',
'--debug',
action='store_true',
help='Enable debug logging.')
args = parser.parse_args()
if args.debug:
logger.setLevel(logging.DEBUG)
mode = GPIO.BCM if args.gpio_mode.upper() == 'BCM' else GPIO.BOARD
with SHT1x(args.data_pin,
args.sck_pin,
gpio_mode=mode,
vdd=args.vdd,
resolution=args.resolution,
heater=args.heater,
otp_no_reload=args.otp_no_reload,
crc_check=args.no_crc_check,
logger=logger) as sensor:
for i in range(5):
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
sensor.calculate_dew_point(temp, humidity)
print(sensor)
sleep(2)
def getTemp():
if IS_WINDOWS:
return 27.777
with SHT1x(18, 23, gpio_mode=GPIO.BCM) as sensor:
return sensor.read_temperature()
def getData(self):
with SHT1x(DATA_PIN, SCK_PIN, gpio_mode=GPIO.BCM) as sensor:
temp = sensor.read_temperature()
humidity = sensor.read_humidity(temp)
sensor.calculate_dew_point(temp, humidity)
return temp,humidity
#Creating users
#auth.create_user_with_email_and_password(email, password)
#Verify Email
#auth.send_email_verification(user['idToken'])
#print(auth.get_account_info(user['idToken']))
#Reset Password
#auth.send_password_reset_email(email)
# Get a reference to the database service
db = firebase.database()
while True:
with SHT1x(18, 23, gpio_mode=GPIO.BCM) as sensor:
temp = sensor.read_temperature()
hum = sensor.read_humidity(temp)
dew1 = sensor.calculate_dew_point(temp, hum)
#data to store
data = {
'Time Batch': time1,
'Temperature': temp,
'Humidity': hum,
'Dew Point': dew1
}
# Pass the user's idToken to the push method
results = db.child("Pol1").child("Test").push(data, user['idToken'])
print(
import datetime
import time
from time import strftime
import sys
import RPi.GPIO as GPIO
from pi_sht1x import SHT1x
DataPin = 24
SCKPin = 23
with SHT1x(DataPin, SCKPin, gpio_mode=GPIO.BCM) as sensor:
tempSHT = sensor.read_temperature()
humiSHT = sensor.read_humidity(tempSHT)
#sensor.calculate_dew_point(tempSHT,humiSHT)
f = open('/usr/share/webiopi/htdocs/ccc/txt/data_tempSHT.txt','a')
data_entry2 = "{0},{1}\n".format(strftime("%Y-%m-%d %H:%M:%S"),"%.2f" % tempSHT)
f.write(data_entry2)
f.close()
f = open('/usr/share/webiopi/htdocs/ccc/txt/data_humiSHT.txt','a')
data_entry3 = "{0},{1}\n".format(strftime("%Y-%m-%d %H:%M:%S"),"%.2f" % humiSHT)
f.write(data_entry3)
f.close()
