def record(self, records):
if self._closing or self._recordProcess is None or not self._recordProcess.is_alive():
return pico_num("PICO_CANCELLED")
status = pico_num("PICO_OK")
try:
with self._recordLock:
if records is not None:
self._recordWrite.put(records.side_copy())
else:
self._recordWrite.put(None)
except Exception as ex:
self.lastError = ex.message
print "Tape Record(%d):" % sys.exc_info()[-1].tb_lineno, self.lastError, type(ex)
status = pico_num("PICO_CANCELLED")
return status
def _setup_processor(self):
if self._recordProcess.is_alive():
with self._readLock:
self._recordControl.put({"Command": "Open",
"args": {"filename": self._filename,
"title": self._title,
"limit": self._limit,
"overwrite": self._overwrite,
"stats": self._stats}},
True)
response = None
try:
response = self._recordRead.get(True, timeout=7.0)
except Queue.Empty:
response = None
if isinstance(response, basestring) and response == "OK":
return pico_num("PICO_OK")
return pico_num("PICO_FILE_WRITE_FAILED")
else:
return pico_num("PICO_OPERATION_FAILED")
def warn_check(tag, status):
if status != st.pico_num("PICO_OK"):
p_warn("%s %s" % (tag, st.pico_tag(status)))
def error_check(tag, status):
if status != st.pico_num("PICO_OK"):
p_error("%s %s" % (tag, st.pico_tag(status)))
def main():
print("INFO: Block mode test started %s" % strftime("%Y-%m-%d %H:%M:%S"))
outdir = os.path.abspath("data")
if not (os.path.exists(outdir) and os.path.isdir(outdir)):
print_error("Output directory not found.")
ps = ps2000a.Device()
status = ps.open_unit(serial=None)
if status != st.pico_num("PICO_OK"):
print_error("Device open failed with %s" % (st.pico_tag(status)))
samples = 8192
interval = 4
triggv = 0.2
triggh = 0.2
triggc = ps.m.Channels.A
triggd = ps.m.ThresholdDirections.rising
voltage_range = ps.m.Ranges.r5v
dname = strftime("%Y%m%d%H%M%S")
logdir = os.path.join(outdir, dname)
try:
if not os.path.exists(logdir): os.mkdir(logdir)
datafile = os.path.join(logdir, "block_data.txt")
except OSError:
datafile = None
print("WARN: Failed to create output directory")
if datafile is not None:
try: datad = open(datafile, "w")
except OSError: datad = None
else: datad = None
print("INFO: Device connected: %s %s" % (ps.info.variant_info, ps.info.batch_and_serial))
print("INFO: Driver: %s" % ps.info.driver_version)
print("INFO: Firmware: %s/%s" % (ps.info.firmware_version_1, ps.info.firmware_version_2))
try:
dev_channels = ps.m.Channels.map[:ps.info.num_channels]
channels = dev_channels
for c in dev_channels:
status, state = ps.get_channel_state(channel=c)
state.range = voltage_range
state.enabled = c in channels
error_check("Channel %s Setup" % ps.m.Channels.labels[c], ps.set_channel(channel=c, state=state))
status, max_samples = ps.set_memory_segments(1)
error_check("Segments setup", status)
print("INFO: Maximum number of samples per channel: %d" % int(max_samples / 4))
if max_samples < 4 * samples:
bufflen = int(max_samples / 4)
print("WARN: Number of raw samples per channel reduced to %d" % bufflen)
else: bufflen = samples
print("INFO: Raw samples length: %d" % bufflen)
print("INFO: Raw sample interval specified as %.2fns" % interval)
error_check("VTrigger setup", ps.set_simple_trigger(enabled=True, source=triggc, threshold=triggv, direction=ps.m.ThresholdDirections.rising, delay=0, waitfor=0))
error_check("HTrigger setup", ps.set_horizontal_trigger_ratio(ratio=triggh))
samples = int(bufflen)
buffers = dict()
for c in channels:
status, buffers[c] = ps.locate_buffer(channel=c, samples=samples, segment=0, mode=ps.m.RatioModes.raw, downsample=1)
error_check("Buffer chan %s setup" % ps.m.Channels.labels[c], status)
print("INFO: Waiting for trigger")
error_check("Collection start", ps.collect_segment(segment=0, interval=interval, overlapped=False))
print("INFO: Trigger detected")
data = dict()
info = None
for c in channels:
if info is None:
status, info = ps.get_buffer_info(buffers[c])
print("INFO: Effective interval of the trace %.2fns" % info["real_interval"])
status, data[c] = ps.get_buffer_data(buffers[c])
error_check("Buffer chan %s data" % ps.m.Channels.labels[c], status)
if datad is not None:
trigger_time = time.time()
print("INFO: Saving data as %s" % os.path.join(logdir, datafile))
datad.write("Initial Time: 0x%X\n" % int(trigger_time*1e6))
datad.write("Time Interval: 0x%X\n" % int(info["real_interval"]))
datad.write("Voltage Ranges (Channel A, B, C, D): 0x%X, 0x%X, 0x%X, 0x%X\n" % (voltage_range, voltage_range, voltage_range, voltage_range))
datad.write("Data (Channel A, B, C, D):\n")
for a, b, c, d in zip(data[channels[0]], data[channels[1]], data[channels[2]], data[channels[3]]):
datad.write("%+05X, %+05X, %+05X, %+05X\n" % (a, b, c, d))
timecut = info["real_interval"] * info["samples"]
time_units = ps.m.TimeUnits.ns
while timecut > 1000:
timecut /= 1000.0
time_units += 1
time_step = timecut / info["samples"]
graph_limit = [0, time_step * (info["samples"] - 1)]
time_domain = time_step * np.arange(0, info["samples"])
plt.xlim(graph_limit)
for i in range(0, len(channels)):
c = channels[i]
label = "Ch%s [%s]" % (ps.m.Channels.labels[c], ps.m.TimeUnits.ascii_labels[time_units])
data_limit = min(len(data[c]), info["samples"])
plt.plot(time_domain[:data_limit], data[c][:data_limit], label=label)
plt.legend()
if triggc == c:
triggx = triggh * samples
triggy = triggv * ps.info.max_adc
marker = '^' if triggd == ps.m.ThresholdDirections.rising else ('v' if triggd == ps.m.ThresholdDirections.falling else 'D')
plt.plot([triggx * time_step], [triggy], marker, ms=9, label=("Ch%s Trigger" % ps.m.Channels.labels[c]))
plt.grid()
if logdir is not None:
saveas = os.path.join(logdir, "block_plot.png")
print("INFO: Saving graph as %s" % saveas)
try: plt.savefig(saveas, dpi=300)
except OSError: print("WARN: " + "Failed to write %s" % saveas)
#plt.show(block=True)
finally:
if datad is not None:
try: datad.close()
except OSError: pass
ps.close_unit()
import picosdk.ps2000a as psdrv
import picosdk.picostatus as st
ps = psdrv.Device()
status = ps.open_unit()
print("Device status is %s." % (st.pico_tag(status)))
if status == st.pico_num("PICO_OK"):
print("Device connected: %s %s" %
(ps.info.variant_info, ps.info.batch_and_serial))
print("Driver: %s" % ps.info.driver_version)
print("Firmware: %s/%s" %
(ps.info.firmware_version_1, ps.info.firmware_version_2))
ps.close_unit()
# POWER MEASUREMENTS FOR 2408B:
# Device connect: 0.035A 175mW
# Device opened: 0.522A 2610mW
# Device closed: 0.074A 370mW
# Device reconnect: 0.035A 175mW
