def test_self_load(self):
hint_list = [self.model_dir]
model = pin.buildModelFromUrdf(self.model_path,
pin.JointModelFreeFlyer())
collision_model_ref = pin.buildGeomFromUrdf(model, self.model_path,
pin.GeometryType.COLLISION,
hint_list)
collision_model_self = pin.GeometryModel()
pin.buildGeomFromUrdf(model, self.model_path,
pin.GeometryType.COLLISION, collision_model_self,
hint_list)
self.assertTrue(checkGeom(collision_model_ref, collision_model_self))
collision_model_self = pin.GeometryModel()
pin.buildGeomFromUrdf(model, self.model_path,
pin.GeometryType.COLLISION, collision_model_self,
self.model_dir)
self.assertTrue(checkGeom(collision_model_ref, collision_model_self))
hint_vec = pin.StdVec_StdString()
hint_vec.append(self.model_dir)
collision_model_self = pin.GeometryModel()
pin.buildGeomFromUrdf(model, self.model_path,
pin.GeometryType.COLLISION, collision_model_self,
hint_vec)
self.assertTrue(checkGeom(collision_model_ref, collision_model_self))
def __init__(self, q0, omega, t):
self.omega = omega
self.q0 = q0
self.qdes = q0.copy()
self.vdes = np.zeros((8, 1))
self.ades = np.zeros((8, 1))
self.error = False
########################################################################
# Definition of the Model and TSID problem #
########################################################################
## Set the paths where the urdf and srdf file of the robot are registered
modelPath = "/opt/openrobots/lib/python3.5/site-packages/../../../share/example-robot-data/robots"
urdf = modelPath + "/solo_description/robots/solo.urdf"
srdf = modelPath + "/solo_description/srdf/solo.srdf"
vector = pin.StdVec_StdString()
vector.extend(item for item in modelPath)
## Create the robot wrapper from the urdf model (without the free flyer)
robot = tsid.RobotWrapper(urdf, vector, False)
self.model = robot.model()
self.data = robot.data()
def computeWrench(cs, Robot, dt):
rp = RosPack()
urdf = rp.get_path(
Robot.packageName
) + '/urdf/' + Robot.urdfName + Robot.urdfSuffix + '.urdf'
#srdf = "package://" + package + '/srdf/' + cfg.Robot.urdfName+cfg.Robot.srdfSuffix + '.srdf'
robot = RobotWrapper.BuildFromURDF(urdf, pin.StdVec_StdString(),
pin.JointModelFreeFlyer(), False)
model = robot.model
data = robot.data
q_t = cs.concatenateQtrajectories()
dq_t = cs.concatenateQtrajectories()
ddq_t = cs.concatenateQtrajectories()
t = q_t.min()
for phase in cs.contactPhases:
phase.wrench_t = None
t = phase.timeInitial
while t <= phase.timeFinal:
pin.rnea(model, data, phase.q_t(t), phase.dq_t(t), phase.ddq_t(t))
pcom, vcom, acom = robot.com(phase.q_t(t), phase.dq_t(t),
phase.ddq_t(t))
# FIXME : why do I need to call com to have the correct values in data ??
phi0 = data.oMi[1].act(pin.Force(data.tau[:6]))
if phase.wrench_t is None:
phase.wrench_t = piecewise(
polynomial(phi0.vector.reshape(-1, 1), t, t))
else:
phase.wrench_t.append(phi0.vector, t)
t += dt
if phase.timeFinal - dt / 2. <= t <= phase.timeFinal + dt / 2.:
t = phase.timeFinal
def test_deprecated_signatures(self):
model = pin.buildModelFromUrdf(self.model_path,
pin.JointModelFreeFlyer())
hint_list = [self.model_dir, "wrong/hint"]
collision_model = pin.buildGeomFromUrdf(model, self.model_path,
hint_list,
pin.GeometryType.COLLISION)
hint_vec = pin.StdVec_StdString()
hint_vec.append(self.model_dir)
collision_model = pin.buildGeomFromUrdf(model, self.model_path,
hint_vec,
pin.GeometryType.COLLISION)
collision_model = pin.buildGeomFromUrdf(model, self.model_path,
self.model_dir,
pin.GeometryType.COLLISION)
if pin.WITH_HPP_FCL_BINDINGS:
collision_model = pin.buildGeomFromUrdf(model, self.model_path,
hint_list,
pin.GeometryType.COLLISION,
pin.hppfcl.MeshLoader())
collision_model = pin.buildGeomFromUrdf(model, self.model_path,
hint_vec,
pin.GeometryType.COLLISION,
pin.hppfcl.MeshLoader())
collision_model = pin.buildGeomFromUrdf(model, self.model_path,
self.model_dir,
pin.GeometryType.COLLISION,
pin.hppfcl.MeshLoader())
def generate_wholebody_load(cfg, cs, fullBody=None, viewer=None):
rp = RosPack()
urdf = rp.get_path(cfg.Robot.packageName) + '/urdf/' + cfg.Robot.urdfName + cfg.Robot.urdfSuffix + '.urdf'
logger.info("load robot : %s", urdf)
robot = pin.RobotWrapper.BuildFromURDF(urdf, pin.StdVec_StdString(), pin.JointModelFreeFlyer(), False)
logger.info("robot loaded.")
cs_wb = ContactSequence()
logger.warning("Load wholebody contact sequence from file : %s", cfg.WB_FILENAME)
cs_wb.loadFromBinary(cfg.WB_FILENAME)
return cs_wb, robot
def generateWholeBodyMotion(cs, fullBody=None, viewer=None):
rp = RosPack()
urdf = rp.get_path(
cfg.Robot.packageName
) + '/urdf/' + cfg.Robot.urdfName + cfg.Robot.urdfSuffix + '.urdf'
if cfg.WB_VERBOSE:
print "load robot : ", urdf
robot = pin.RobotWrapper.BuildFromURDF(urdf, pin.StdVec_StdString(),
pin.JointModelFreeFlyer(), False)
if cfg.WB_VERBOSE:
print "robot loaded."
filename = cfg.EXPORT_PATH + "/npz/" + cfg.DEMO_NAME + ".npz"
print "Load npz file : ", filename
res = wholebody_result.loadFromNPZ(filename)
return res, robot
def export(cs_com, cs_wb):
rp = RosPack()
urdf = rp.get_path(cfg.Robot.packageName) + '/urdf/' + cfg.Robot.urdfName + cfg.Robot.urdfSuffix + '.urdf'
if cfg.WB_VERBOSE:
print("load robot : ", urdf)
#srdf = "package://" + package + '/srdf/' + cfg.Robot.urdfName+cfg.Robot.srdfSuffix + '.srdf'
robot = RobotWrapper.BuildFromURDF(urdf, pin.StdVec_StdString(), pin.JointModelFreeFlyer(), False)
if cfg.WB_VERBOSE:
print("robot loaded in export OpenHRP")
results = computeWaistData(robot, res)
path = cfg.EXPORT_PATH + "/openHRP/" + cfg.DEMO_NAME
if not os.path.exists(path):
os.makedirs(path)
q_openhrp_l = generateOpenHRPMotion(results, path, cfg.DEMO_NAME, useRefZMP=cfg.openHRP_useZMPref)
writeKinematicsData(results, path, cfg.DEMO_NAME)
def computeWrench(res):
rp = RosPack()
urdf = rp.get_path(
cfg.Robot.packageName
) + '/urdf/' + cfg.Robot.urdfName + cfg.Robot.urdfSuffix + '.urdf'
#srdf = "package://" + package + '/srdf/' + cfg.Robot.urdfName+cfg.Robot.srdfSuffix + '.srdf'
robot = RobotWrapper.BuildFromURDF(urdf, pin.StdVec_StdString(),
pin.JointModelFreeFlyer(), False)
model = robot.model
data = robot.data
for k in range(res.N):
pin.rnea(model, data, res.q_t[:, k], res.dq_t[:, k], res.ddq_t[:, k])
pcom, vcom, acom = robot.com(
res.q_t[:, k], res.dq_t[:, k], res.ddq_t[:, k]
) # FIXME : why do I need to call com to have the correct values in data ??
phi0 = data.oMi[1].act(pin.Force(data.tau[:6]))
res.wrench_t[:, k] = phi0.vector
return res
def initScenePinocchio(urdfName,
packageName,
envName=None,
envPackageName="hpp_environments"):
rp = RosPack()
urdf = rp.get_path(packageName) + '/urdf/' + urdfName + '.urdf'
robot = pin.RobotWrapper.BuildFromURDF(urdf, pin.StdVec_StdString(),
pin.JointModelFreeFlyer())
robot.initDisplay(loadModel=True)
robot.displayCollisions(False)
robot.displayVisuals(True)
robot.display(robot.model.neutralConfiguration)
cl = gepetto.corbaserver.Client()
gui = cl.gui
if envName:
urdfEnvPath = rp.get_path(envPackageName)
urdfEnv = urdfEnvPath + '/urdf/' + envName + '.urdf'
gui.addUrdfObjects(sceneName + "/environments", urdfEnv, urdfEnvPath,
True)
return robot, gui
def generate_wholebody_tsid(cfg, cs_ref, fullBody=None, viewer=None, robot=None, queue_qt = None):
"""
Generate the whole body motion corresponding to the given contactSequence
:param cs: Contact sequence containing the references,
it will only be modified if the end effector trajectories are not valid.
New references will be generated and added to the cs
:param fullBody: Required to compute collision free end effector trajectories
:param viewer: If provided, and the settings are enabled, display the end effector trajectories and the last step computed
:param robot: a tsid.RobotWrapper instance. If None, a new one is created from the urdf files defined in cfg
:param queue_qt: If not None, the joint trajectories are send to this multiprocessing.Queue during computation
The queue take a tuple: [q_t (a Curve object), ContactPhase (may be None), Bool (True mean that this is the
last trajectory of the motion)]
:return: a new ContactSequence object, containing the wholebody trajectories,
and the other trajectories computed from the wholebody motion request with cfg.IK_STORE_* and a robotWrapper instance
"""
# define nested functions used in control loop #
def appendJointsValues(first_iter_for_phase = False):
"""
Append the current q value to the current phase.q_t trajectory
:param first_iter_for_phase: if True, set the current phase.q_init value
and initialize a new Curve for phase.q_t
"""
if first_iter_for_phase:
phase.q_init = q
phase.q_t = piecewise(polynomial(q.reshape(-1,1), t, t))
#phase.root_t = piecewise_SE3(constantSE3curve(SE3FromConfig(q) ,t))
else:
phase.q_t.append(q, t)
#phase.root_t.append(SE3FromConfig(q), t)
if queue_qt:
queue_qt.put([phase.q_t.curve_at_index(phase.q_t.num_curves()-1),
phase.dq_t.curve_at_index(phase.dq_t.num_curves()-1),
None,
False])
def appendJointsDerivatives(first_iter_for_phase=False):
"""
Append the current v and dv value to the current phase.dq_t and phase.ddq_t trajectory
:param first_iter_for_phase: if True, initialize a new Curve for phase.dq_t and phase.ddq_t
"""
if first_iter_for_phase:
phase.dq_t = piecewise(polynomial(v.reshape(-1, 1), t, t))
phase.ddq_t = piecewise(polynomial(dv.reshape(-1, 1), t, t))
else:
phase.dq_t.append(v, t)
phase.ddq_t.append(dv, t)
def appendTorques(first_iter_for_phase = False):
"""
Append the current tau value to the current phase.tau_t trajectory
:param first_iter_for_phase: if True, initialize a new Curve for phase.tau_t
"""
tau = invdyn.getActuatorForces(sol)
if first_iter_for_phase:
phase.tau_t = piecewise(polynomial(tau.reshape(-1,1), t, t))
else:
phase.tau_t.append(tau, t)
def appendCentroidal(first_iter_for_phase = False):
"""
Compute the values of the CoM position, velocity, acceleration, the anuglar momentum and it's derivative
from the wholebody data and append them to the current phase trajectories
:param first_iter_for_phase: if True, set the initial values for the current phase
and initialize the centroidal trajectories
"""
pcom, vcom, acom = pinRobot.com(q, v, dv)
L = pinRobot.centroidalMomentum(q, v).angular
dL = pin.computeCentroidalMomentumTimeVariation(pinRobot.model, pinRobot.data, q, v, dv).angular
if first_iter_for_phase:
phase.c_init = pcom
phase.dc_init = vcom
phase.ddc_init = acom
phase.L_init = L
phase.dL_init = dL
phase.c_t = piecewise(polynomial(pcom.reshape(-1,1), t , t))
phase.dc_t = piecewise(polynomial(vcom.reshape(-1,1), t, t))
phase.ddc_t = piecewise(polynomial(acom.reshape(-1,1), t, t))
phase.L_t = piecewise(polynomial(L.reshape(-1,1), t, t))
phase.dL_t = piecewise(polynomial(dL.reshape(-1,1), t, t))
else:
phase.c_t.append(pcom, t)
phase.dc_t.append(vcom, t)
phase.ddc_t.append(acom, t)
phase.L_t.append(L, t)
phase.dL_t.append(dL, t)
def appendZMP(first_iter_for_phase = False):
"""
Compute the zmp from the current wholebody data and append it to the current phase
:param first_iter_for_phase: if True, initialize a new Curve for phase.zmp_t
"""
tau = pin.rnea(pinRobot.model, pinRobot.data, q, v, dv)
# tau without external forces, only used for the 6 first
# res.tau_t[:6,k_t] = tau[:6]
phi0 = pinRobot.data.oMi[1].act(Force(tau[:6]))
wrench = phi0.vector
zmp = shiftZMPtoFloorAltitude(cs, t, phi0, cfg.Robot)
if first_iter_for_phase:
phase.zmp_t = piecewise(polynomial(zmp.reshape(-1,1), t, t))
phase.wrench_t = piecewise(polynomial(wrench.reshape(-1,1), t, t))
else:
phase.zmp_t.append(zmp, t)
phase.wrench_t.append(wrench, t)
def appendEffectorsTraj(first_iter_for_phase = False):
"""
Append the current position of the effectors not in contact to the current phase trajectories
:param first_iter_for_phase: if True, initialize a new Curve for the phase effector trajectories
"""
if first_iter_for_phase and phase_prev:
for eeName in phase_prev.effectorsWithTrajectory():
if t > phase_prev.effectorTrajectory(eeName).max():
placement = getCurrentEffectorPosition(robot, invdyn.data(), eeName)
phase_prev.effectorTrajectory(eeName).append(placement, t)
for eeName in phase.effectorsWithTrajectory():
placement = getCurrentEffectorPosition(robot, invdyn.data(), eeName)
if first_iter_for_phase:
phase.addEffectorTrajectory(eeName, piecewise_SE3(constantSE3curve(placement, t)))
else:
phase.effectorTrajectory(eeName).append(placement, t)
def appendContactForcesTrajs(first_iter_for_phase = False):
"""
Append the current contact force value to the current phase, for all the effectors in contact
:param first_iter_for_phase: if True, initialize a new Curve for the phase contact trajectories
"""
for eeName in phase.effectorsInContact():
contact = dic_contacts[eeName]
if invdyn.checkContact(contact.name, sol):
contact_forces = invdyn.getContactForce(contact.name, sol)
contact_normal_force = np.array(contact.getNormalForce(contact_forces))
else:
logger.warning("invdyn check contact returned false while the reference contact is active !")
contact_normal_force = np.zeros(1)
if cfg.Robot.cType == "_3_DOF":
contact_forces = np.zeros(3)
else:
contact_forces = np.zeros(12)
if first_iter_for_phase:
phase.addContactForceTrajectory(eeName, piecewise(polynomial(contact_forces.reshape(-1,1), t, t)))
phase.addContactNormalForceTrajectory(eeName, piecewise(polynomial(contact_normal_force.reshape(1,1), t, t)))
else:
phase.contactForce(eeName).append(contact_forces, t)
phase.contactNormalForce(eeName).append(contact_normal_force.reshape(1), t)
def storeData(first_iter_for_phase = False):
"""
Append all the required data (selected in the configuration file) to the current ContactPhase
:param first_iter_for_phase: if True, set the initial values for the current phase
and correctly initiliaze empty trajectories for this phase
"""
if cfg.IK_store_joints_derivatives:
appendJointsDerivatives(first_iter_for_phase)
appendJointsValues(first_iter_for_phase)
if cfg.IK_store_joints_torque:
appendTorques(first_iter_for_phase)
if cfg.IK_store_centroidal:
appendCentroidal(first_iter_for_phase)
if cfg.IK_store_zmp:
appendZMP(first_iter_for_phase)
if cfg.IK_store_effector:
appendEffectorsTraj(first_iter_for_phase)
if cfg.IK_store_contact_forces:
appendContactForcesTrajs(first_iter_for_phase)
def printIntermediate():
"""
Print the current state: active contacts, tracking errors, computed joint acceleration and velocity
:return:
"""
if logger.isEnabledFor(logging.INFO):
print("Time %.3f" % (t))
for eeName, contact in dic_contacts.items():
if invdyn.checkContact(contact.name, sol):
f = invdyn.getContactForce(contact.name, sol)
print("\tnormal force %s: %.1f" % (contact.name.ljust(20, '.'), contact.getNormalForce(f)))
print("\ttracking err %s: %.3f" % (comTask.name.ljust(20, '.'), norm(comTask.position_error, 2)))
for eeName in phase.effectorsWithTrajectory():
task = dic_effectors_tasks[eeName]
error = task.position_error
if cfg.Robot.cType == "_3_DOF":
error = error[0:3]
print("\ttracking err %s: %.3f" % (task.name.ljust(20, '.'), norm(error, 2)))
print("\t||v||: %.3f\t ||dv||: %.3f" % (norm(v, 2), norm(dv)))
def checkDiverge():
"""
Check if either the joint velocity or acceleration is over a treshold or is NaN, and raise an error
"""
if norm(dv) > 1e6 or norm(v) > 1e6:
logger.error("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
logger.error("/!\ ABORT : controler unstable at t = %f /!\ ", t)
logger.error("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
raise ValueError("ABORT : controler unstable at t = " + str(t))
if math.isnan(norm(dv)) or math.isnan(norm(v)):
logger.error("!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
logger.error("/!\ ABORT : nan at t = %f /!\ ", t)
logger.error("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!")
raise ValueError("ABORT : controler unstable at t = " + str(t))
def stopHere():
"""
Set the current data as final values for the current phase, resize the contact sequence if needed and return
:return: [The current ContactSequence, the RobotWrapper]
"""
setPreviousFinalValues(phase_prev, phase, cfg)
if cfg.WB_ABORT_WHEN_INVALID:
# cut the sequence up to the last phase
cs.resize(pid)
return cs, robot
elif cfg.WB_RETURN_INVALID:
# cut the sequence up to the current phase
cs.resize(pid+1)
return cs, robot
### End of nested functions definitions ###
if not viewer:
logger.warning("No viewer linked, cannot display end_effector trajectories.")
logger.warning("Start TSID ... ")
# copy the given contact sequence to keep it as reference :
cs = ContactSequence(cs_ref)
# delete all the 'reference' trajectories from result (to leave room for the real trajectories stored)
deleteAllTrajectories(cs)
# Create a robot wrapper
if robot is None or cfg.IK_store_centroidal or cfg.IK_store_zmp:
rp = RosPack()
package_name = cfg.Robot.packageName.split("/")[0]
package_path = rp.get_path(package_name)
urdf = package_path + cfg.Robot.packageName.lstrip(
package_name) + '/urdf/' + cfg.Robot.urdfName + cfg.Robot.urdfSuffix + '.urdf'
logger.info("load robot : %s", urdf)
if robot is None:
logger.info("load robot : %s", urdf)
robot = tsid.RobotWrapper(urdf, pin.StdVec_StdString(), pin.JointModelFreeFlyer(), False)
else:
logger.info("Use given robot in tsid.")
logger.info("robot loaded in tsid.")
if cfg.IK_store_centroidal or cfg.IK_store_zmp:
logger.info("load pinocchio robot ...")
# FIXME : tsid robotWrapper don't have all the required methods, only pinocchio have them
pinRobot = pin.RobotWrapper.BuildFromURDF(urdf, package_path, pin.JointModelFreeFlyer())
logger.info("pinocchio robot loaded.")
# get the selected end effector trajectory generation method
effectorMethod, effectorCanRetry = cfg.get_effector_method()
# get the selected simulator method
Simulator = cfg.get_simulator_class()
simulator = Simulator(cfg.IK_dt, robot.model())
### Define initial state of the robot ###
phase0 = cs.contactPhases[0]
q = phase0.q_init[:robot.nq].copy()
if not q.any():
raise RuntimeError("The contact sequence doesn't contain an initial whole body configuration")
t = phase0.timeInitial
if cs_ref.contactPhases[0].dq_t and cs_ref.contactPhases[0].dq_t.min() <= t <= cs_ref.contactPhases[0].dq_t.max():
v = cs_ref.contactPhases[0].dq_t(t)
else:
v = np.zeros(robot.nv)
logger.debug("V_init used in tsid : %s", v)
invdyn = tsid.InverseDynamicsFormulationAccForce("tsid", robot, False)
invdyn.computeProblemData(t, q, v)
simulator.init(q, v)
# add initial contacts :
dic_contacts = {}
for eeName in cs.contactPhases[0].effectorsInContact():
# replace the initial contact patch placements if needed to match exactly the current position in the problem:
updateContactPlacement(cs, 0, eeName,
getCurrentEffectorPosition(robot, invdyn.data(), eeName),
cfg.Robot.cType == "_6_DOF")
# create the contacts :
contact = createContactForEffector(cfg, invdyn, robot, eeName, phase0.contactPatch(eeName), False)
dic_contacts.update({eeName: contact})
if cfg.EFF_CHECK_COLLISION: # initialise object needed to check the motion
from mlp.utils import check_path
validator = check_path.PathChecker(fullBody, cfg.CHECK_DT, logger.isEnabledFor(logging.INFO))
### Initialize all task used ###
logger.info("initialize tasks : ")
if cfg.w_com > 0. :
comTask = tsid.TaskComEquality("task-com", robot)
comTask.setKp(cfg.kp_com * np.ones(3))
comTask.setKd(2.0 * np.sqrt(cfg.kp_com) * np.ones(3))
invdyn.addMotionTask(comTask, cfg.w_com, cfg.level_com, 0.0)
else:
comTask = None
if cfg.w_am > 0.:
amTask = tsid.TaskAMEquality("task-am", robot)
amTask.setKp(cfg.kp_am * np.array([1., 1., 0.]))
amTask.setKd(2.0 * np.sqrt(cfg.kp_am * np.array([1., 1., 0.])))
invdyn.addMotionTask(amTask, cfg.w_am, cfg.level_am, 0.)
else:
amTask = None
if cfg.w_posture > 0.:
postureTask = tsid.TaskJointPosture("task-joint-posture", robot)
postureTask.setKp(cfg.kp_posture * cfg.gain_vector)
postureTask.setKd(2.0 * np.sqrt(cfg.kp_posture * cfg.gain_vector))
postureTask.setMask(cfg.masks_posture)
invdyn.addMotionTask(postureTask, cfg.w_posture, cfg.level_posture, 0.0)
q_ref = cfg.IK_REFERENCE_CONFIG
samplePosture = tsid.TrajectorySample(q_ref.shape[0] - 7)
samplePosture.pos(q_ref[7:]) # -7 because we remove the freeflyer part
else :
postureTask = None
if cfg.w_rootOrientation > 0. :
orientationRootTask = tsid.TaskSE3Equality("task-orientation-root", robot, 'root_joint')
mask = np.ones(6)
mask[0:3] = 0
mask[5] = cfg.YAW_ROT_GAIN
orientationRootTask.setMask(mask)
orientationRootTask.setKp(cfg.kp_rootOrientation * mask)
orientationRootTask.setKd(2.0 * np.sqrt(cfg.kp_rootOrientation * mask))
invdyn.addMotionTask(orientationRootTask, cfg.w_rootOrientation, cfg.level_rootOrientation, 0.0)
else:
orientationRootTask = None
# init effector task objects :
usedEffectors = cs.getAllEffectorsInContact()
dic_effectors_tasks = createEffectorTasksDic(cfg, usedEffectors, robot)
# Add bounds tasks if required:
if cfg.w_torque_bounds > 0.:
tau_max = cfg.scaling_torque_bounds*robot.model().effortLimit[-robot.na:]
tau_min = -tau_max
actuationBoundsTask = tsid.TaskActuationBounds("task-actuation-bounds", robot)
actuationBoundsTask.setBounds(tau_min, tau_max)
invdyn.addActuationTask(actuationBoundsTask, cfg.w_torque_bounds, 0, 0.0)
if cfg.w_joint_bounds > 0.:
jointBoundsTask = tsid.TaskJointBounds("task-joint-bounds", robot, cfg.IK_dt)
v_max = cfg.scaling_vel_bounds * robot.model().velocityLimit[-robot.na:]
v_min = -v_max
print("v_max : ", v_max)
jointBoundsTask.setVelocityBounds(v_min, v_max)
invdyn.addMotionTask(jointBoundsTask, cfg.w_joint_bounds, 0, 0.0)
solver = tsid.SolverHQuadProg("qp solver")
solver.resize(invdyn.nVar, invdyn.nEq, invdyn.nIn)
# time check
dt = cfg.IK_dt
logger.info("dt : %f", dt)
logger.info("tsid initialized, start control loop")
#raw_input("Enter to start the motion (motion displayed as it's computed, may be slower than real-time)")
time_start = time.time()
# For each phases, create the necessary task and references trajectories :
for pid in range(cs.size()):
logger.info("## for phase : %d", pid)
logger.info("t = %f", t)
# phase_ref contains the reference trajectories and should not be modified exept for new effector trajectories
# when the first ones was not collision free
phase_ref = cs_ref.contactPhases[pid]
# phase de not contains trajectories (exept for the end effectors) and should be modified with the new values computed
phase = cs.contactPhases[pid]
if pid > 0:
phase_prev = cs.contactPhases[pid - 1]
else:
phase_prev = None
if pid < cs.size() - 1:
phase_next = cs.contactPhases[pid + 1]
else:
phase_next = None
time_interval = [phase_ref.timeInitial, phase_ref.timeFinal]
logger.info("time_interval %s", time_interval)
# take CoM and AM trajectory from the phase, with their derivatives
com_traj = [phase_ref.c_t, phase_ref.dc_t, phase_ref.ddc_t]
am_traj = [phase_ref.L_t, phase_ref.L_t, phase_ref.dL_t]
# add root's orientation ref from reference config :
root_traj = phase_ref.root_t
# add se3 tasks for end effector when required
for eeName in phase.effectorsWithTrajectory():
logger.info("add se3 task for %s", eeName)
task = dic_effectors_tasks[eeName]
invdyn.addMotionTask(task, cfg.w_eff, cfg.level_eff, 0.)
adjustEndEffectorTrajectoryIfNeeded(cfg, phase_ref, robot, invdyn.data(), eeName, effectorMethod)
logger.info("t interval : %s", time_interval)
# add newly created contacts :
new_contacts_names = [] # will store the names of the contact tasks created at this phase
for eeName in usedEffectors:
if phase_prev and phase_ref.isEffectorInContact(eeName) and not phase_prev.isEffectorInContact(eeName):
invdyn.removeTask(dic_effectors_tasks[eeName].name, 0.0) # remove pin task for this contact
logger.info("remove se3 effector task : %s", dic_effectors_tasks[eeName].name)
if logger.isEnabledFor(logging.DEBUG):
current_placement = getCurrentEffectorPosition(robot, invdyn.data(), eeName)
logger.debug("Current effector placement : %s", current_placement)
logger.debug("Reference effector placement : %s", cs.contactPhases[pid].contactPatch(eeName).placement)
updateContactPlacement(cs, pid, eeName,
getCurrentEffectorPosition(robot, invdyn.data(), eeName),
cfg.Robot.cType == "_6_DOF")
contact = createContactForEffector(cfg, invdyn, robot, eeName, phase.contactPatch(eeName))
new_contacts_names += [contact.name]
dic_contacts.update({eeName: contact})
logger.info("Create contact for : %s", eeName)
# start removing the contact that will be broken in the next phase :
# (This tell the solver that it should start minimizing the contact force on this contact, and ideally get to 0 at the given time)
for eeName, contact in dic_contacts.items():
if phase_next and phase.isEffectorInContact(eeName) and not phase_next.isEffectorInContact(eeName):
transition_time = phase.duration + dt/2.
logger.info("\nTime %.3f Start breaking contact %s. transition time : %.3f\n",
t, contact.name, transition_time)
exist = invdyn.removeRigidContact(contact.name, transition_time)
assert exist, "Try to remove a non existing contact !"
# Remove all effectors not in contact at this phase,
# This is required as the block above may not remove the contact exactly at the desired time
# FIXME: why is it required ? Numerical approximation in the transition_time ?
for eeName, contact in dic_contacts.items():
if not phase.isEffectorInContact(eeName):
exist = invdyn.removeRigidContact(contact.name, 0.)
if exist:
logger.warning("Contact "+eeName+" was not remove after the given transition time.")
if cfg.WB_STOP_AT_EACH_PHASE:
input('start simulation')
# save values at the beginning of the current phase
q_begin = q.copy()
v_begin = v.copy()
phase.q_init = q_begin
if phase_prev:
phase_prev.q_final = q_begin
phaseValid = False
iter_for_phase = -1
# iterate until a valid motion for this phase is found (ie. collision free and which respect joint-limits)
while not phaseValid:
deletePhaseWBtrajectories(phase) # clean previous invalid trajectories
t = phase.timeInitial
k_t = 0
if iter_for_phase >= 0:
# reset values to their value at the beginning of the current phase
q = q_begin.copy()
v = v_begin.copy()
simulator.q = q
simulator.v = v
iter_for_phase += 1
logger.info("Start computation for phase %d , t = %f, try number : %d", pid, t, iter_for_phase)
# loop to generate states (q,v,a) for the current contact phase :
while t < phase.timeFinal - (dt / 2.):
# set traj reference for current time :
# com
if comTask:
sampleCom = curvesToTSID(com_traj,t)
comTask.setReference(sampleCom)
# am
if amTask:
if cfg.IK_trackAM:
sampleAM = curvesToTSID(am_traj,t)
else:
sampleAM = tsid.TrajectorySample(3)
amTask.setReference(sampleAM)
# posture
#print "postural task ref : ",samplePosture.pos()
if postureTask:
postureTask.setReference(samplePosture)
# root orientation :
if orientationRootTask:
sampleRoot = curveSE3toTSID(root_traj,t)
orientationRootTask.setReference(sampleRoot)
# update weight of regularization tasks for the new contacts:
if len(new_contacts_names) > 0 :
# linearly decrease the weight of the tasks for the newly created contacts
u_w_force = (t - phase.timeInitial) / (phase.duration * cfg.w_forceRef_time_ratio)
if u_w_force <= 1.:
current_w_force = cfg.w_forceRef_init * (1. - u_w_force) + cfg.w_forceRef_end * u_w_force
for contact_name in new_contacts_names:
success = invdyn.updateRigidContactWeights(contact_name, current_w_force)
assert success, "Unable to change the weight of the force regularization task for contact "+contact_name
logger.debug("### references given : ###")
logger.debug("com pos : %s", sampleCom.pos())
logger.debug("com vel : %s", sampleCom.vel())
logger.debug("com acc : %s", sampleCom.acc())
if amTask:
logger.debug("AM pos : %s", sampleAM.pos())
logger.debug("AM vel : %s", sampleAM.vel())
logger.debug("root pos : %s", sampleRoot.pos())
logger.debug("root vel : %s", sampleRoot.vel())
# end effector (if they exists)
for eeName, traj in phase_ref.effectorTrajectories().items():
sampleEff = curveSE3toTSID(traj,t,True)
dic_effectors_tasks[eeName].setReference(sampleEff)
logger.debug("effector %s, pos = %s", eeName, sampleEff.pos())
logger.debug("effector %s, vel = %s", eeName, sampleEff.vel())
logger.debug("previous q = %s", q)
logger.debug("previous v = %s", v)
# solve HQP for the current time
HQPData = invdyn.computeProblemData(t, q, v)
if t < phase.timeInitial + dt:
logger.info("final data for phase %d", pid)
if logger.isEnabledFor(logging.INFO):
HQPData.print_all()
sol = solver.solve(HQPData)
dv = invdyn.getAccelerations(sol)
storeData(k_t == 0)
q, v = simulator.simulate(dv)
t += dt
k_t += 1
if t >= phase.timeFinal - (dt / 2.):
t = phase.timeFinal # avoid numerical imprecisions
logger.debug("v = %s", v)
logger.debug("dv = %s", dv)
if int(t / dt) % cfg.IK_PRINT_N == 0:
printIntermediate()
try:
checkDiverge()
except ValueError:
return stopHere()
# end while t \in phase_t (loop for the current contact phase)
if len(phase.effectorsWithTrajectory()) > 0 and cfg.EFF_CHECK_COLLISION:
phaseValid, t_invalid = validator.check_motion(phase.q_t)
#if iter_for_phase < 3 :# debug only, force limb-rrt
# phaseValid = False
# t_invalid = (phase.timeInitial + phase.timeFinal) / 2.
if not phaseValid:
if iter_for_phase == 0:
# save the first q_t trajectory computed, for limb-rrt
first_q_t = phase.q_t
logger.warning("Phase %d not valid at t = %f", pid, t_invalid)
logger.info("First invalid q : %s", phase.q_t(t_invalid))
if t_invalid <= (phase.timeInitial + cfg.EFF_T_PREDEF) \
or t_invalid >= (phase.timeFinal - cfg.EFF_T_PREDEF):
logger.error("Motion is invalid during predefined phases, cannot change this.")
return stopHere()
if effectorCanRetry():
logger.warning("Try new end effector trajectory.")
try:
for eeName, ref_traj in phase_ref.effectorTrajectories().items():
placement_init = ref_traj.evaluateAsSE3(phase.timeInitial)
placement_end = ref_traj.evaluateAsSE3(phase.timeFinal)
traj = effectorMethod(cfg, time_interval, placement_init, placement_end,
iter_for_phase + 1, first_q_t, phase_prev,
phase_ref, phase_next, fullBody, eeName, viewer)
# save the new trajectory in the phase with the references
phase_ref.addEffectorTrajectory(eeName,traj)
if cfg.DISPLAY_ALL_FEET_TRAJ and logger.isEnabledFor(logging.INFO):
color = fullBody.dict_limb_color_traj[eeName]
color[-1] = 0.6 # set small transparency
display_tools.displaySE3Traj(phase_ref.effectorTrajectory(eeName),
viewer.client.gui,
viewer.sceneName,
eeName + "_traj_" + str(pid) + "_" + str(iter_for_phase),
color,
[phase.timeInitial, phase.timeFinal],
fullBody.dict_offset[eeName])
except ValueError as e:
logging.error("ERROR in generateEndEffectorTraj :", exc_info=e)
return stopHere()
else:
logging.error("End effector method choosen do not allow retries, abort here.")
return stopHere()
else: # no effector motions, phase always valid (or bypass the check)
phaseValid = True
logging.info("Phase %d valid.", pid)
if phaseValid:
setPreviousFinalValues(phase_prev, phase, cfg)
# display the progress by moving the robot at the last configuration computed
if viewer and cfg.IK_SHOW_PROGRESS:
display_tools.displayWBconfig(viewer,q)
#end while not phaseValid
# end for all phases
# store the data of the last point
phase_prev = phase
phase = ContactPhase(phase_prev)
storeData(True)
setPreviousFinalValues(phase_prev, phase, cfg)
time_end = time.time() - time_start
logger.warning("Whole body motion generated in : %f s.", time_end)
logger.info("\nFinal COM Position %s", robot.com(invdyn.data()))
logger.info("Desired COM Position %s", cs.contactPhases[-1].c_final)
if queue_qt:
queue_qt.put([phase.q_t.curve_at_index(phase.q_t.num_curves() - 1), None, True])
return cs, robot
def __init__(self, conf, viewer=True):
self.conf = conf
vector = se3.StdVec_StdString()
vector.extend(item for item in conf.path)
self.robot = tsid.RobotWrapper(conf.urdf, vector, False)
robot = self.robot
self.model = model = robot.model()
try:
# q = se3.getNeutralConfiguration(model, conf.srdf, False)
se3.loadReferenceConfigurations(model, conf.srdf, False)
q = model.referenceConfigurations['default']
# q = model.referenceConfigurations["half_sitting"]
except:
q = conf.q0
# q = np.matrix(np.zeros(robot.nv)).T
v = np.matrix(np.zeros(robot.nv)).T
assert model.existFrame(conf.ee_frame_name)
formulation = tsid.InverseDynamicsFormulationAccForce(
"tsid", robot, False)
formulation.computeProblemData(0.0, q, v)
postureTask = tsid.TaskJointPosture("task-posture", robot)
postureTask.setKp(conf.kp_posture * matlib.ones(robot.nv).T)
postureTask.setKd(2.0 * np.sqrt(conf.kp_posture) *
matlib.ones(robot.nv).T)
formulation.addMotionTask(postureTask, conf.w_posture, 1, 0.0)
self.eeTask = tsid.TaskSE3Equality("task-ee", self.robot,
self.conf.ee_frame_name)
self.eeTask.setKp(self.conf.kp_ee * np.matrix(np.ones(6)).T)
self.eeTask.setKd(2.0 * np.sqrt(self.conf.kp_ee) *
np.matrix(np.ones(6)).T)
self.eeTask.setMask(conf.ee_task_mask)
self.eeTask.useLocalFrame(False)
self.EE = model.getFrameId(conf.ee_frame_name)
H_ee_ref = self.robot.framePosition(formulation.data(), self.EE)
self.trajEE = tsid.TrajectorySE3Constant("traj-ee", H_ee_ref)
formulation.addMotionTask(self.eeTask, conf.w_ee, 1, 0.0)
self.tau_max = conf.tau_max_scaling * model.effortLimit
self.tau_min = -self.tau_max
actuationBoundsTask = tsid.TaskActuationBounds("task-actuation-bounds",
robot)
actuationBoundsTask.setBounds(self.tau_min, self.tau_max)
if (conf.w_torque_bounds > 0.0):
formulation.addActuationTask(actuationBoundsTask,
conf.w_torque_bounds, 0, 0.0)
jointBoundsTask = tsid.TaskJointBounds("task-joint-bounds", robot,
conf.dt)
self.v_max = conf.v_max_scaling * model.velocityLimit
self.v_min = -self.v_max
jointBoundsTask.setVelocityBounds(self.v_min, self.v_max)
if (conf.w_joint_bounds > 0.0):
formulation.addMotionTask(jointBoundsTask, conf.w_joint_bounds, 0,
0.0)
trajPosture = tsid.TrajectoryEuclidianConstant("traj_joint", q)
postureTask.setReference(trajPosture.computeNext())
solver = tsid.SolverHQuadProgFast("qp solver")
solver.resize(formulation.nVar, formulation.nEq, formulation.nIn)
self.trajPosture = trajPosture
self.postureTask = postureTask
self.actuationBoundsTask = actuationBoundsTask
self.jointBoundsTask = jointBoundsTask
self.formulation = formulation
self.solver = solver
self.q = q
self.v = v
# for gepetto viewer
if (viewer):
self.robot_display = se3.RobotWrapper.BuildFromURDF(
conf.urdf, [
conf.path,
])
l = subprocess.getstatusoutput(
"ps aux |grep 'gepetto-gui'|grep -v 'grep'|wc -l")
if int(l[1]) == 0:
os.system('gepetto-gui &')
time.sleep(1)
gepetto.corbaserver.Client()
self.robot_display.initViewer(loadModel=True)
self.robot_display.displayCollisions(False)
self.robot_display.displayVisuals(True)
self.robot_display.display(q)
self.gui = self.robot_display.viewer.gui
self.gui.setCameraTransform(0, conf.CAMERA_TRANSFORM)
cs_name = args.cs_name
if args.env_name:
env_name = args.env_name
# Start the gepetto-gui background process
subprocess.run(["killall", "gepetto-gui"])
process_viewer = subprocess.Popen("gepetto-gui",
stdout=subprocess.PIPE,
stderr=subprocess.DEVNULL,
preexec_fn=os.setpgrp)
atexit.register(process_viewer.kill)
# Load robot model in pinocchio
rp = RosPack()
urdf = rp.get_path(robot_package_name) + '/urdf/' + urdf_name + '.urdf'
robot = pin.RobotWrapper.BuildFromURDF(urdf, pin.StdVec_StdString(),
pin.JointModelFreeFlyer())
robot.initDisplay(loadModel=True)
robot.displayCollisions(False)
robot.displayVisuals(True)
# Load environment model
cl = gepetto.corbaserver.Client()
gui = cl.gui
env_package_path = rp.get_path(env_package_name)
env_urdf_path = env_package_path + '/urdf/' + env_name + '.urdf'
gui.addUrdfObjects(scene_name + "/environments", env_urdf_path, True)
# Load the motion from the multicontact-api file
cs = ContactSequence()
cs.loadFromBinary(cs_name)
def __init__(self, q0, omega, t):
self.qdes = q0.copy()
self.vdes = np.zeros((8,1))
self.ades = np.zeros((8,1))
self.error = False
kp_posture = 1.0
w_posture = 10.0
########################################################################
# Definition of the Model and TSID problem #
########################################################################
## Set the paths where the urdf and srdf file of the robot are registered
modelPath = "/opt/openrobots/lib/python3.5/site-packages/../../../share/example-robot-data/robots"
urdf = modelPath + "/solo_description/robots/solo.urdf"
srdf = modelPath + "/solo_description/srdf/solo.srdf"
vector = pin.StdVec_StdString()
vector.extend(item for item in modelPath)
## Create the robot wrapper from the urdf model (without the free flyer)
self.robot = tsid.RobotWrapper(urdf, vector, False)
self.model = self.robot.model()
## Creation of the Invverse Dynamics HQP problem using the robot
## accelerations (base + joints) and the contact forces
self.invdyn = tsid.InverseDynamicsFormulationAccForce("tsid", self.robot, False)
# Compute the problem data with a solver based on EiQuadProg
self.invdyn.computeProblemData(t, self.qdes, self.vdes)
# Get the initial data
self.data = self.invdyn.data()
## Task definition
# POSTURE Task
self.postureTask = tsid.TaskJointPosture("task-posture", self.robot)
self.postureTask.setKp(kp_posture * matlib.ones(8).T) # Proportional gain
self.postureTask.setKd(2.0 * np.sqrt(kp_posture) * matlib.ones(8).T) # Derivative gain
# Add the task to the HQP with weight = w_posture, priority level = 0 (as real constraint) and a transition duration = 0.0
self.invdyn.addMotionTask(self.postureTask, w_posture, 0, 0.0)
## TSID Trajectory
pin.loadReferenceConfigurations(self.model, srdf, False)
q_ref = self.model.referenceConfigurations['straight_standing']
trajPosture = tsid.TrajectoryEuclidianConstant("traj_joint", q_ref)
# Set the trajectory as reference for the posture task
samplePosture = trajPosture.computeNext()
self.postureTask.setReference(samplePosture)
## Initialization of the solver
# Use EiquadprogFast solver
self.solver = tsid.SolverHQuadProgFast("qp solver")
# Resize the solver to fit the number of variables, equality and inequality constraints
self.solver.resize(self.invdyn.nVar, self.invdyn.nEq, self.invdyn.nIn)
def __init__(self, N_simulation, k_mpc, n_periods):
self.q_ref = np.array([[0.0, 0.0, 0.2027682, 0.0, 0.0, 0.0, 1.0,
0.0, 0.8, -1.6, 0, 0.8, -1.6,
0, -0.8, 1.6, 0, -0.8, 1.6]]).transpose()
self.qtsid = self.q_ref.copy()
self.vtsid = np.zeros((18, 1))
self.ades = np.zeros((18, 1))
self.error = False
self.verbose = True
# List with the names of all feet frames
self.foot_frames = ['FL_FOOT', 'FR_FOOT', 'HL_FOOT', 'HR_FOOT']
# Constraining the contacts
mu = 0.9 # friction coefficient
fMin = 1.0 # minimum normal force
fMax = 25.0 # maximum normal force
contactNormal = np.matrix([0., 0., 1.]).T # direction of the normal to the contact surface
# Coefficients of the posture task
kp_posture = 10.0 # proportionnal gain of the posture task
w_posture = 1.0 # weight of the posture task
# Coefficients of the contact tasks
kp_contact = 100.0 # proportionnal gain for the contacts
self.w_forceRef = 50.0 # weight of the forces regularization
self.w_reg_f = 50.0
# Coefficients of the foot tracking task
kp_foot = 100.0 # proportionnal gain for the tracking task
self.w_foot = 500.0 # weight of the tracking task
# Arrays to store logs
k_max_loop = N_simulation
self.f_pos = np.zeros((4, k_max_loop, 3))
self.f_vel = np.zeros((4, k_max_loop, 3))
self.f_acc = np.zeros((4, k_max_loop, 3))
self.f_pos_ref = np.zeros((4, k_max_loop, 3))
self.f_vel_ref = np.zeros((4, k_max_loop, 3))
self.f_acc_ref = np.zeros((4, k_max_loop, 3))
self.b_pos = np.zeros((k_max_loop, 6))
self.b_vel = np.zeros((k_max_loop, 6))
self.com_pos = np.zeros((k_max_loop, 3))
self.com_pos_ref = np.zeros((k_max_loop, 3))
self.c_forces = np.zeros((4, k_max_loop, 3))
self.h_ref_feet = np.zeros((k_max_loop, ))
self.goals = np.zeros((3, 4))
self.vgoals = np.zeros((3, 4))
self.agoals = np.zeros((3, 4))
self.mgoals = np.zeros((6, 4))
# Position of the shoulders in local frame
self.shoulders = np.array([[0.19, 0.19, -0.19, -0.19], [0.15005, -0.15005, 0.15005, -0.15005]])
self.footsteps = self.shoulders.copy()
self.memory_contacts = self.shoulders.copy()
# Foot trajectory generator
max_height_feet = 0.05
t_lock_before_touchdown = 0.05
self.ftgs = [ftg.Foot_trajectory_generator(max_height_feet, t_lock_before_touchdown) for i in range(4)]
# Which pair of feet is active (0 for [1, 2] and 1 for [0, 3])
self.pair = -1
# Number of TSID steps for 1 step of the MPC
self.k_mpc = k_mpc
# For update_feet_tasks function
self.dt = 0.001 # [s], time step
self.t1 = 0.14 # [s], duration of swing phase
# Rotation matrix
self.R = np.eye(3)
# Feedforward torques
self.tau_ff = np.zeros((12, 1))
# Torques sent to the robot
self.torques12 = np.zeros((12, 1))
self.tau = np.zeros((12, ))
self.ID_base = None # ID of base link
self.ID_feet = [None] * 4 # ID of feet links
# Footstep planner object
# self.fstep_planner = FootstepPlanner.FootstepPlanner(0.001, 32)
self.vu_m = np.zeros((6, 1))
self.t_stance = 0.16
self.T_gait = 0.32
self.n_periods = n_periods
self.h_ref = 0.235 - 0.01205385
self.t_swing = np.zeros((4, )) # Total duration of current swing phase for each foot
self.contacts_order = [0, 1, 2, 3]
# Parameter to enable/disable hybrid control
self.enable_hybrid_control = False
# Time since the start of the simulation
self.t = 0.0
########################################################################
# Definition of the Model and TSID problem #
########################################################################
# Set the paths where the urdf and srdf file of the robot are registered
modelPath = "/opt/openrobots/share/example-robot-data/robots"
urdf = modelPath + "/solo_description/robots/solo12.urdf"
srdf = modelPath + "/solo_description/srdf/solo.srdf"
vector = pin.StdVec_StdString()
vector.extend(item for item in modelPath)
# Create the robot wrapper from the urdf model (which has no free flyer) and add a free flyer
self.robot = tsid.RobotWrapper(urdf, vector, pin.JointModelFreeFlyer(), False)
self.model = self.robot.model()
# Creation of the Invverse Dynamics HQP problem using the robot
# accelerations (base + joints) and the contact forces
self.invdyn = tsid.InverseDynamicsFormulationAccForce("tsid", self.robot, False)
# Compute the problem data with a solver based on EiQuadProg
t = 0.0
self.invdyn.computeProblemData(t, self.qtsid, self.vtsid)
# Saving IDs for later
self.ID_base = self.model.getFrameId("base_link")
for i, name in enumerate(self.foot_frames):
self.ID_feet[i] = self.model.getFrameId(name)
# Store a frame object to avoid creating one each time
self.pos_foot = self.robot.framePosition(self.invdyn.data(), self.ID_feet[0])
#####################
# LEGS POSTURE TASK #
#####################
# Task definition (creating the task object)
self.postureTask = tsid.TaskJointPosture("task-posture", self.robot)
self.postureTask.setKp(kp_posture * matlib.ones(self.robot.nv-6).T) # Proportional gain
self.postureTask.setKd(2.0 * np.sqrt(kp_posture) * matlib.ones(self.robot.nv-6).T) # Derivative gain
# Add the task to the HQP with weight = w_posture, priority level = 1 (not real constraint)
# and a transition duration = 0.0
self.invdyn.addMotionTask(self.postureTask, w_posture, 1, 0.0)
# TSID Trajectory (creating the trajectory object and linking it to the task)
pin.loadReferenceConfigurations(self.model, srdf, False)
self.trajPosture = tsid.TrajectoryEuclidianConstant("traj_joint", self.q_ref[7:])
self.samplePosture = self.trajPosture.computeNext()
self.postureTask.setReference(self.samplePosture)
############
# CONTACTS #
############
self.contacts = 4*[None] # List to store the rigid contact tasks
for i, name in enumerate(self.foot_frames):
# Contact definition (creating the contact object)
self.contacts[i] = tsid.ContactPoint(name, self.robot, name, contactNormal, mu, fMin, fMax)
self.contacts[i].setKp((kp_contact * matlib.ones(3).T))
self.contacts[i].setKd((2.0 * np.sqrt(kp_contact) * matlib.ones(3).T))
self.contacts[i].useLocalFrame(False)
# Set the contact reference position
H_ref = self.robot.framePosition(self.invdyn.data(), self.ID_feet[i])
H_ref.translation = np.matrix(
[H_ref.translation[0, 0],
H_ref.translation[1, 0],
0.0]).T
self.contacts[i].setReference(H_ref)
# Regularization weight for the force tracking subtask
self.contacts[i].setRegularizationTaskWeightVector(
np.matrix([self.w_reg_f, self.w_reg_f, self.w_reg_f]).T)
# Adding the rigid contact after the reference contact force has been set
self.invdyn.addRigidContact(self.contacts[i], self.w_forceRef)
#######################
# FOOT TRACKING TASKS #
#######################
self.feetTask = 4*[None] # List to store the foot tracking tasks
mask = np.matrix([1.0, 1.0, 1.0, 0.0, 0.0, 0.0]).T
# Task definition (creating the task object)
for i_foot in range(4):
self.feetTask[i_foot] = tsid.TaskSE3Equality(
"foot_track_" + str(i_foot), self.robot, self.foot_frames[i_foot])
self.feetTask[i_foot].setKp(kp_foot * mask)
self.feetTask[i_foot].setKd(2.0 * np.sqrt(kp_foot) * mask)
self.feetTask[i_foot].setMask(mask)
self.feetTask[i_foot].useLocalFrame(False)
# The reference will be set later when the task is enabled
##########
# SOLVER #
##########
# Use EiquadprogFast solver
self.solver = tsid.SolverHQuadProgFast("qp solver")
# Resize the solver to fit the number of variables, equality and inequality constraints
self.solver.resize(self.invdyn.nVar, self.invdyn.nEq, self.invdyn.nIn)
def __init__(self, conf, viewer=True):
self.conf = conf
vector = se3.StdVec_StdString()
vector.extend(item for item in conf.path)
self.robot = tsid.RobotWrapper(conf.urdf, vector,
se3.JointModelFreeFlyer(), False)
robot = self.robot
self.model = robot.model()
pin.loadReferenceConfigurations(self.model, conf.srdf, False)
self.q0 = q = self.model.referenceConfigurations["half_sitting"]
v = np.zeros(robot.nv)
assert self.model.existFrame(conf.rf_frame_name)
assert self.model.existFrame(conf.lf_frame_name)
formulation = tsid.InverseDynamicsFormulationAccForce(
"tsid", robot, False)
formulation.computeProblemData(0.0, q, v)
data = formulation.data()
contact_Point = np.ones((3, 4)) * conf.lz
contact_Point[0, :] = [-conf.lxn, -conf.lxn, conf.lxp, conf.lxp]
contact_Point[1, :] = [-conf.lyn, conf.lyp, -conf.lyn, conf.lyp]
contactRF = tsid.Contact6d("contact_rfoot", robot, conf.rf_frame_name,
contact_Point, conf.contactNormal, conf.mu,
conf.fMin, conf.fMax)
contactRF.setKp(conf.kp_contact * np.ones(6))
contactRF.setKd(2.0 * np.sqrt(conf.kp_contact) * np.ones(6))
self.RF = robot.model().getJointId(conf.rf_frame_name)
H_rf_ref = robot.position(data, self.RF)
# modify initial robot configuration so that foot is on the ground (z=0)
q[2] -= H_rf_ref.translation[2] - conf.lz
formulation.computeProblemData(0.0, q, v)
data = formulation.data()
H_rf_ref = robot.position(data, self.RF)
contactRF.setReference(H_rf_ref)
formulation.addRigidContact(contactRF, conf.w_forceRef)
contactLF = tsid.Contact6d("contact_lfoot", robot, conf.lf_frame_name,
contact_Point, conf.contactNormal, conf.mu,
conf.fMin, conf.fMax)
contactLF.setKp(conf.kp_contact * np.ones(6))
contactLF.setKd(2.0 * np.sqrt(conf.kp_contact) * np.ones(6))
self.LF = robot.model().getJointId(conf.lf_frame_name)
H_lf_ref = robot.position(data, self.LF)
contactLF.setReference(H_lf_ref)
formulation.addRigidContact(contactLF, conf.w_forceRef)
comTask = tsid.TaskComEquality("task-com", robot)
comTask.setKp(conf.kp_com * np.ones(3))
comTask.setKd(2.0 * np.sqrt(conf.kp_com) * np.ones(3))
formulation.addMotionTask(comTask, conf.w_com, 1, 0.0)
postureTask = tsid.TaskJointPosture("task-posture", robot)
postureTask.setKp(conf.kp_posture * np.ones(robot.nv - 6))
postureTask.setKd(2.0 * np.sqrt(conf.kp_posture) *
np.ones(robot.nv - 6))
formulation.addMotionTask(postureTask, conf.w_posture, 1, 0.0)
self.leftFootTask = tsid.TaskSE3Equality("task-left-foot", self.robot,
self.conf.lf_frame_name)
self.leftFootTask.setKp(self.conf.kp_foot * np.ones(6))
self.leftFootTask.setKd(2.0 * np.sqrt(self.conf.kp_foot) * np.ones(6))
self.trajLF = tsid.TrajectorySE3Constant("traj-left-foot", H_lf_ref)
formulation.addMotionTask(self.leftFootTask, self.conf.w_foot, 1, 0.0)
self.rightFootTask = tsid.TaskSE3Equality("task-right-foot",
self.robot,
self.conf.rf_frame_name)
self.rightFootTask.setKp(self.conf.kp_foot * np.ones(6))
self.rightFootTask.setKd(2.0 * np.sqrt(self.conf.kp_foot) * np.ones(6))
self.trajRF = tsid.TrajectorySE3Constant("traj-right-foot", H_rf_ref)
formulation.addMotionTask(self.rightFootTask, self.conf.w_foot, 1, 0.0)
self.tau_max = conf.tau_max_scaling * robot.model(
).effortLimit[-robot.na:]
self.tau_min = -self.tau_max
actuationBoundsTask = tsid.TaskActuationBounds("task-actuation-bounds",
robot)
actuationBoundsTask.setBounds(self.tau_min, self.tau_max)
if (conf.w_torque_bounds > 0.0):
formulation.addActuationTask(actuationBoundsTask,
conf.w_torque_bounds, 0, 0.0)
jointBoundsTask = tsid.TaskJointBounds("task-joint-bounds", robot,
conf.dt)
self.v_max = conf.v_max_scaling * robot.model(
).velocityLimit[-robot.na:]
self.v_min = -self.v_max
jointBoundsTask.setVelocityBounds(self.v_min, self.v_max)
if (conf.w_joint_bounds > 0.0):
formulation.addMotionTask(jointBoundsTask, conf.w_joint_bounds, 0,
0.0)
com_ref = robot.com(data)
self.trajCom = tsid.TrajectoryEuclidianConstant("traj_com", com_ref)
self.sample_com = self.trajCom.computeNext()
q_ref = q[7:]
self.trajPosture = tsid.TrajectoryEuclidianConstant(
"traj_joint", q_ref)
postureTask.setReference(self.trajPosture.computeNext())
self.sampleLF = self.trajLF.computeNext()
self.sample_LF_pos = self.sampleLF.pos()
self.sample_LF_vel = self.sampleLF.vel()
self.sample_LF_acc = self.sampleLF.acc()
self.sampleRF = self.trajRF.computeNext()
self.sample_RF_pos = self.sampleRF.pos()
self.sample_RF_vel = self.sampleRF.vel()
self.sample_RF_acc = self.sampleRF.acc()
self.solver = tsid.SolverHQuadProgFast("qp solver")
self.solver.resize(formulation.nVar, formulation.nEq, formulation.nIn)
self.comTask = comTask
self.postureTask = postureTask
self.contactRF = contactRF
self.contactLF = contactLF
self.actuationBoundsTask = actuationBoundsTask
self.jointBoundsTask = jointBoundsTask
self.formulation = formulation
self.q = q
self.v = v
self.contact_LF_active = True
self.contact_RF_active = True
# for gepetto viewer
if (viewer):
self.robot_display = se3.RobotWrapper.BuildFromURDF(
conf.urdf, [
conf.path,
], se3.JointModelFreeFlyer())
l = subprocess.getstatusoutput(
"ps aux |grep 'gepetto-gui'|grep -v 'grep'|wc -l")
if int(l[1]) == 0:
os.system('gepetto-gui &')
time.sleep(1)
gepetto.corbaserver.Client()
self.robot_display.initViewer(loadModel=True)
self.robot_display.displayCollisions(False)
self.robot_display.displayVisuals(True)
self.robot_display.display(q)
self.gui = self.robot_display.viewer.gui
# self.gui.setCameraTransform(0, conf.CAMERA_TRANSFORM)
self.gui.addFloor('world/floor')
self.gui.setLightingMode('world/floor', 'OFF')
def __init__(self):
########################################################################
# Definition of the Model and TSID problem #
########################################################################
# set the path
path = "/opt/openrobots/share/example-robot-data/robots/solo_description/robots"
urdf = path + "/solo12.urdf"
srdf = "/opt/openrobots/share/example-robot-data/robots/solo_description/srdf/solo.srdf"
vec = pin.StdVec_StdString()
vec.extend(item for item in path)
# get the solo12 wrapper
self.solo12_wrapper = tsid.RobotWrapper(urdf, vec,
pin.JointModelFreeFlyer(),
False)
self.solo12_model = self.solo12_wrapper.model()
pin.loadReferenceConfigurations(self.solo12_model, srdf, False)
# problem formulation
self.formulation = tsid.InverseDynamicsFormulationAccForce(
"tsid", self.solo12_wrapper, False)
self.q0 = self.solo12_model.referenceConfigurations[
"straight_standing"]
self.v0 = np.zeros(self.solo12_model.nv)
self.formulation.computeProblemData(0.0, self.q0, self.v0)
self.data = self.formulation.data()
# get frame ID
self.ID_FL = self.solo12_model.getFrameId("FL_FOOT")
self.ID_FR = self.solo12_model.getFrameId("FR_FOOT")
self.ID_HL = self.solo12_model.getFrameId("HL_FOOT")
self.ID_HR = self.solo12_model.getFrameId("HR_FOOT")
self.ID_BASE = self.solo12_model.getFrameId("base_link")
############
# COM TASK #
############
self.kp_com = 50
self.w_com = 3
self.comTask = tsid.TaskComEquality("task-com", self.solo12_wrapper)
self.comTask.setKp(self.kp_com * np.ones(3).T)
self.comTask.setKd(2 * np.sqrt(self.kp_com) * np.ones(3).T)
self.formulation.addMotionTask(self.comTask, self.w_com, 1, 0.0)
self.com_ref = self.solo12_wrapper.com(self.data)
self.trajCom = tsid.TrajectoryEuclidianConstant(
"traj-com", self.com_ref)
#################
# SE3 BASE TASK #
#################
self.kp_trunk = 50
self.w_trunk = 1
self.trunkTask = tsid.TaskSE3Equality("task-trunk",
self.solo12_wrapper, 'base_link')
mask = np.matrix([1.0, 1.0, 0.0, 1.0, 1.0, 1.0]).T
self.trunkTask.setKp(
np.matrix([
self.kp_trunk, self.kp_trunk, 0.0, self.kp_trunk,
self.kp_trunk, self.kp_trunk
]).T)
self.trunkTask.setKd(
np.matrix([
2.0 * np.sqrt(self.kp_trunk), 2.0 * np.sqrt(self.kp_trunk),
0.0, 2.0 * np.sqrt(self.kp_trunk),
2.0 * np.sqrt(self.kp_trunk), 2.0 * np.sqrt(self.kp_trunk)
]).T)
self.trunkTask.useLocalFrame(False)
self.trunkTask.setMask(mask)
self.formulation.addMotionTask(self.trunkTask, self.w_trunk, 1, 0.0)
self.trunk_ref = self.solo12_wrapper.framePosition(
self.data, self.ID_BASE)
self.trajTrunk = tsid.TrajectorySE3Constant("traj_base_link",
self.trunk_ref)
##################
# CONTACT FORCES #
##################
self.contactNormal = np.array([0, 0, 1])
self.kp_contact = 30
self.mu = 0.5
self.contactFL = tsid.ContactPoint("contactFL", self.solo12_wrapper,
"FL_FOOT", self.contactNormal,
self.mu, 1, 1000)
self.contactFL.setKp(self.kp_contact * np.ones(6).T)
self.contactFL.setKd(2 * np.sqrt(self.kp_contact) * np.ones(6).T)
self.fl_ref = self.solo12_wrapper.framePosition(self.data, self.ID_FL)
self.contactFL.setReference(self.fl_ref)
self.formulation.addRigidContact(self.contactFL, 10)
self.contactFR = tsid.ContactPoint("contactFR", self.solo12_wrapper,
"FR_FOOT", self.contactNormal,
self.mu, 1, 1000)
self.contactFR.setKp(self.kp_contact * np.ones(6).T)
self.contactFR.setKd(2 * np.sqrt(self.kp_contact) * np.ones(6).T)
self.fr_ref = self.solo12_wrapper.framePosition(self.data, self.ID_FR)
self.contactFR.setReference(self.fr_ref)
self.formulation.addRigidContact(self.contactFR, 10)
self.contactHR = tsid.ContactPoint("contactHR", self.solo12_wrapper,
"HR_FOOT", self.contactNormal,
self.mu, 1, 1000)
self.contactHR.setKp(self.kp_contact * np.ones(6).T)
self.contactHR.setKd(2 * np.sqrt(self.kp_contact) * np.ones(6).T)
self.hr_ref = self.solo12_wrapper.framePosition(self.data, self.ID_HR)
self.contactHR.setReference(self.hr_ref)
self.formulation.addRigidContact(self.contactHR, 10)
self.contactHL = tsid.ContactPoint("contactHL", self.solo12_wrapper,
"HL_FOOT", self.contactNormal,
self.mu, 1, 1000)
self.contactHL.setKp(self.kp_contact * np.ones(6).T)
self.contactHL.setKd(2 * np.sqrt(self.kp_contact) * np.ones(6).T)
self.hl_ref = self.solo12_wrapper.framePosition(self.data, self.ID_HL)
self.contactHL.setReference(self.hl_ref)
self.formulation.addRigidContact(self.contactHL, 10)
##########
# SOLVER #
##########
self.solver = tsid.SolverHQuadProgFast("qp solver")
self.solver.resize(self.formulation.nVar, self.formulation.nEq,
self.formulation.nIn)
def __init__(self, conf, dt, urdf, modelPath, srdf):
self.conf = conf
self.dt = dt
vector = pin.StdVec_StdString()
vector.extend(item for item in modelPath)
self.robot = tsid.RobotWrapper(urdf, vector, pin.JointModelFreeFlyer(),
False)
robot = self.robot
self.model = robot.model()
pin.loadReferenceConfigurations(self.model, srdf, False)
try:
self.q0 = conf.q0
q = np.copy(conf.q0)
except:
self.q0 = self.model.referenceConfigurations["half_sitting"]
q = np.copy(self.q0)
self.v0 = v = np.zeros(robot.nv)
assert self.model.existFrame(conf.rf_frame_name)
assert self.model.existFrame(conf.lf_frame_name)
formulation = tsid.InverseDynamicsFormulationAccForce(
"tsid", robot, False)
formulation.computeProblemData(0.0, q, v)
data = formulation.data()
contact_Point = np.ones((3, 4)) * conf.lz
contact_Point[0, :] = [-conf.lxn, -conf.lxn, conf.lxp, conf.lxp]
contact_Point[1, :] = [-conf.lyn, conf.lyp, -conf.lyn, conf.lyp]
contactRF = tsid.Contact6d("contact_rfoot", robot, conf.rf_frame_name,
contact_Point, conf.contact_normal, conf.mu,
conf.fMin, conf.fMax)
contactRF.setKp(conf.kp_contact * np.ones(6))
contactRF.setKd(2.0 * np.sqrt(conf.kp_contact) * np.ones(6))
self.RF = robot.model().getFrameId(conf.rf_frame_name)
H_rf_ref = robot.framePosition(formulation.data(), self.RF)
# print('H RF\n', H_rf_ref.translation)
# modify initial robot configuration so that foot is on the ground (z=0)
q[2] -= H_rf_ref.translation[2] + conf.lz
formulation.computeProblemData(0.0, q, v)
data = formulation.data()
H_rf_ref = robot.framePosition(data, self.RF)
# print('H RF\n', H_rf_ref)
contactRF.setReference(H_rf_ref)
if (conf.w_contact >= 0.0):
formulation.addRigidContact(contactRF, conf.w_forceRef,
conf.w_contact, 1)
else:
formulation.addRigidContact(contactRF, conf.w_forceRef)
contactLF = tsid.Contact6d("contact_lfoot", robot, conf.lf_frame_name,
contact_Point, conf.contact_normal, conf.mu,
conf.fMin, conf.fMax)
contactLF.setKp(conf.kp_contact * np.ones(6))
contactLF.setKd(2.0 * np.sqrt(conf.kp_contact) * np.ones(6))
self.LF = robot.model().getFrameId(conf.lf_frame_name)
H_lf_ref = robot.framePosition(formulation.data(), self.LF)
# print('H LF\n', H_lf_ref)
contactLF.setReference(H_lf_ref)
if (conf.w_contact >= 0.0):
formulation.addRigidContact(contactLF, conf.w_forceRef,
conf.w_contact, 1)
else:
formulation.addRigidContact(contactLF, conf.w_forceRef)
comTask = tsid.TaskComEquality("task-com", robot)
comTask.setKp(conf.kp_com * np.ones(3))
comTask.setKd(2.0 * np.sqrt(conf.kp_com) * np.ones(3))
if (conf.w_com > 0):
formulation.addMotionTask(comTask, conf.w_com, 1, 0.0)
postureTask = tsid.TaskJointPosture("task-posture", robot)
try:
postureTask.setKp(conf.kp_posture)
postureTask.setKd(2.0 * np.sqrt(conf.kp_posture))
except:
postureTask.setKp(conf.kp_posture * np.ones(robot.nv - 6))
postureTask.setKd(2.0 * np.sqrt(conf.kp_posture) *
np.ones(robot.nv - 6))
if (conf.w_posture > 0):
formulation.addMotionTask(postureTask, conf.w_posture, 1, 0.0)
self.leftFootTask = tsid.TaskSE3Equality("task-left-foot", self.robot,
self.conf.lf_frame_name)
self.leftFootTask.setKp(self.conf.kp_foot * np.ones(6))
self.leftFootTask.setKd(2.0 * np.sqrt(self.conf.kp_foot) * np.ones(6))
self.trajLF = tsid.TrajectorySE3Constant("traj-left-foot", H_lf_ref)
if (conf.w_foot > 0):
formulation.addMotionTask(self.leftFootTask, self.conf.w_foot, 1,
0.0)
#
self.rightFootTask = tsid.TaskSE3Equality("task-right-foot",
self.robot,
self.conf.rf_frame_name)
self.rightFootTask.setKp(self.conf.kp_foot * np.ones(6))
self.rightFootTask.setKd(2.0 * np.sqrt(self.conf.kp_foot) * np.ones(6))
self.trajRF = tsid.TrajectorySE3Constant("traj-right-foot", H_rf_ref)
if (conf.w_foot > 0):
formulation.addMotionTask(self.rightFootTask, self.conf.w_foot, 1,
0.0)
self.waistTask = tsid.TaskSE3Equality("task-waist", self.robot,
self.conf.waist_frame_name)
self.waistTask.setKp(self.conf.kp_waist * np.ones(6))
self.waistTask.setKd(2.0 * np.sqrt(self.conf.kp_waist) * np.ones(6))
self.waistTask.setMask(np.array([0, 0, 0, 1, 1, 1.]))
waistID = robot.model().getFrameId(conf.waist_frame_name)
H_waist_ref = robot.framePosition(formulation.data(), waistID)
self.trajWaist = tsid.TrajectorySE3Constant("traj-waist", H_waist_ref)
if (conf.w_waist > 0):
formulation.addMotionTask(self.waistTask, self.conf.w_waist, 1,
0.0)
self.tau_max = conf.tau_max_scaling * robot.model(
).effortLimit[-robot.na:]
self.tau_min = -self.tau_max
actuationBoundsTask = tsid.TaskActuationBounds("task-actuation-bounds",
robot)
actuationBoundsTask.setBounds(self.tau_min, self.tau_max)
if (conf.w_torque_bounds > 0.0):
formulation.addActuationTask(actuationBoundsTask,
conf.w_torque_bounds, 0, 0.0)
jointBoundsTask = tsid.TaskJointBounds("task-joint-bounds", robot, dt)
self.v_max = conf.v_max_scaling * robot.model(
).velocityLimit[-robot.na:]
self.v_min = -self.v_max
jointBoundsTask.setVelocityBounds(self.v_min, self.v_max)
if (conf.w_joint_bounds > 0.0):
formulation.addMotionTask(jointBoundsTask, conf.w_joint_bounds, 0,
0.0)
com_ref = robot.com(formulation.data())
self.trajCom = tsid.TrajectoryEuclidianConstant("traj_com", com_ref)
self.sample_com = self.trajCom.computeNext()
q_ref = q[7:]
self.trajPosture = tsid.TrajectoryEuclidianConstant(
"traj_joint", q_ref)
postureTask.setReference(self.trajPosture.computeNext())
self.sampleLF = self.trajLF.computeNext()
self.sample_LF_pos = self.sampleLF.pos()
self.sample_LF_vel = self.sampleLF.vel()
self.sample_LF_acc = self.sampleLF.acc()
self.sampleRF = self.trajRF.computeNext()
self.sample_RF_pos = self.sampleRF.pos()
self.sample_RF_vel = self.sampleRF.vel()
self.sample_RF_acc = self.sampleRF.acc()
self.solver = tsid.SolverHQuadProgFast("qp solver")
self.solver.resize(formulation.nVar, formulation.nEq, formulation.nIn)
self.comTask = comTask
self.postureTask = postureTask
self.contactRF = contactRF
self.contactLF = contactLF
self.actuationBoundsTask = actuationBoundsTask
self.jointBoundsTask = jointBoundsTask
self.formulation = formulation
self.q = q
self.v = v
self.q0 = np.copy(self.q)
self.contact_LF_active = True
self.contact_RF_active = True
# self.reset()
data = np.load(conf.DATA_FILE_TSID)
# assume dt>dt_ref
r = int(dt / conf.dt_ref)
self.N = int(data['com'].shape[1] / r)
self.contact_phase = data['contact_phase'][::r]
self.com_pos_ref = np.asarray(data['com'])[:, ::r]
self.com_vel_ref = np.asarray(data['dcom'])[:, ::r]
self.com_acc_ref = np.asarray(data['ddcom'])[:, ::r]
self.x_RF_ref = np.asarray(data['x_RF'])[:, ::r]
self.dx_RF_ref = np.asarray(data['dx_RF'])[:, ::r]
self.ddx_RF_ref = np.asarray(data['ddx_RF'])[:, ::r]
self.x_LF_ref = np.asarray(data['x_LF'])[:, ::r]
self.dx_LF_ref = np.asarray(data['dx_LF'])[:, ::r]
self.ddx_LF_ref = np.asarray(data['ddx_LF'])[:, ::r]
self.cop_ref = np.asarray(data['cop'])[:, ::r]
x_rf = self.get_placement_RF().translation
offset = x_rf - self.x_RF_ref[:, 0]
# print("offset", offset)
for i in range(self.N):
self.com_pos_ref[:, i] += offset
self.x_RF_ref[:, i] += offset
self.x_LF_ref[:, i] += offset
w_forceRef = 1e-3 # weight of force regularization task kp_posture = 10.0 # proportionnal gain of the posture task kp_foot = 1000.0 # proportionnal gain of the feet tasks N_SIMULATION = 10000 # number of time steps simulated dt = 0.001 # controller time step ## Set the path where the urdf and srdf file of the robot is registered modelPath = "/opt/openrobots/lib/python2.7/site-packages/../../../share/example-robot-data" urdf = modelPath + "/solo_description/robots/solo12.urdf" srdf = modelPath + "/solo_description/srdf/solo.srdf" vector = pin.StdVec_StdString() vector.extend(item for item in modelPath) # Create the robot wrapper from the urdf model robot = tsid.RobotWrapper(urdf, vector, pin.JointModelFreeFlyer(), False) ## Creation of the robot wrapper for the Gepetto Viewer robot_display = pin.RobotWrapper.BuildFromURDF(urdf, [modelPath, ], pin.JointModelFreeFlyer()) robot_display.initViewer(loadModel=True) ## Take the model of the robot and load its reference configuration model = robot.model() pin.loadReferenceConfigurations(model, srdf, False)
def mcapi_playback(name_interface):
"""Main function that calibrates the robot, get it into a default waiting position then launch
the main control loop once the user has pressed the Enter key
Args:
name_interface (string): name of the interface that is used to communicate with the robot
"""
if SIMULATION:
device = PyBulletSimulator()
qc = None
else:
device = Solo12(name_interface, dt=DT)
qc = QualisysClient(ip="140.93.16.160", body_id=0)
if LOGGING:
logger = Logger(device, qualisys=qc)
# Number of motors
nb_motors = device.nb_motors
q_viewer = np.array((7 + nb_motors) * [
0.,
])
# Gepetto-gui
v = viewerClient()
v.display(q_viewer)
# PyBullet GUI
enable_pyb_GUI = True
# Maximum duration of the demonstration
t_max = 300.0
# Default position after calibration
q_init = np.array([0, 0.8, -1.6, 0, 0.8, -1.6, 0, -0.8, 1.6, 0, -0.8, 1.6])
# Create Estimator object
estimator = Estimator(DT, np.int(t_max / DT))
# Set the paths where the urdf and srdf file of the robot are registered
modelPath = "/opt/openrobots/share/example-robot-data/robots"
urdf = modelPath + "/solo_description/robots/solo12.urdf"
vector = pin.StdVec_StdString()
vector.extend(item for item in modelPath)
# Create the robot wrapper from the urdf model (which has no free flyer) and add a free flyer
robot = tsid.RobotWrapper(urdf, vector, pin.JointModelFreeFlyer(), False)
model = robot.model()
# Creation of the Invverse Dynamics HQP problem using the robot
# accelerations (base + joints) and the contact forces
invdyn = tsid.InverseDynamicsFormulationAccForce("tsid", robot, False)
# Compute the problem data with a solver based on EiQuadProg
invdyn.computeProblemData(0.0, np.hstack((np.zeros(7), q_init)),
np.zeros(18))
# Initiate communication with the device and calibrate encoders
if SIMULATION:
device.Init(calibrateEncoders=True,
q_init=q_init,
envID=0,
use_flat_plane=True,
enable_pyb_GUI=enable_pyb_GUI,
dt=DT)
else:
device.Init(calibrateEncoders=True, q_init=q_init)
# Wait for Enter input before starting the control loop
put_on_the_floor(device, q_init)
# CONTROL LOOP ***************************************************
t = 0.0
k = 0
while ((not device.hardware.IsTimeout()) and (t < t_max)):
device.UpdateMeasurment() # Retrieve data from IMU and Motion capture
# Run estimator with hind left leg touching the ground
estimator.run_filter(k, np.array([0, 0, 1, 0]), device, invdyn.data(),
model)
# Zero desired torques
tau = np.zeros(12)
# Set desired torques for the actuators
device.SetDesiredJointTorque(tau)
# Call logger
if LOGGING:
logger.sample(device, qualisys=qc, estimator=estimator)
# Send command to the robot
device.SendCommand(WaitEndOfCycle=True)
if ((device.cpt % 100) == 0):
device.Print()
# Gepetto GUI
if k > 0:
pos = np.array(estimator.data.oMf[26].translation).ravel()
q_viewer[0:3] = np.array([-pos[0], -pos[1],
estimator.FK_h]) # Position
q_viewer[3:7] = estimator.q_FK[3:7, 0] # Orientation
q_viewer[7:] = estimator.q_FK[7:, 0] # Encoders
v.display(q_viewer)
t += DT
k += 1
# ****************************************************************
# Whatever happened we send 0 torques to the motors.
device.SetDesiredJointTorque([0] * nb_motors)
device.SendCommand(WaitEndOfCycle=True)
if device.hardware.IsTimeout():
print("Masterboard timeout detected.")
print(
"Either the masterboard has been shut down or there has been a connection issue with the cable/wifi."
)
# Shut down the interface between the computer and the master board
device.hardware.Stop()
# Save the logs of the Logger object
if LOGGING:
logger.saveAll()
if SIMULATION and enable_pyb_GUI:
# Disconnect the PyBullet server (also close the GUI)
device.Stop()
print("End of script")
quit()
def __init__(self, q0, omega, t):
self.omega = omega
self.qdes = q0.copy()
self.vdes = np.zeros((18, 1))
self.ades = np.zeros((18, 1))
self.error = False
kp_posture = 10.0 # proportionnal gain of the posture task
w_posture = 1.0 # weight of the posture task
kp_com = 100.0 # proportionnal gain of the CoM task
w_com = 100.0 # weight of the CoM task
kp_lock = 1.0 # proportionnal gain of the lock task
w_lock = 100.0 # weight of the lock task
# For the contacts
mu = 0.3 # friction coefficient
fMin = 1.0 # minimum normal force
fMax = 100.0 # maximum normal force
w_forceRef = 1e-3 # weight of the forces regularization
kp_contact = 1.0 # proportionnal gain for the contacts
foot_frames = ['HL_FOOT', 'HR_FOOT', 'FL_FOOT',
'FR_FOOT'] # tab with all the foot frames names
contactNormal = np.matrix(
[0., 0., 1.]).T # direction of the normal to the contact surface
########################################################################
# Definition of the Model and TSID problem #
########################################################################
## Set the paths where the urdf and srdf file of the robot are registered
modelPath = "/opt/openrobots/lib/python3.5/site-packages/../../../share/example-robot-data/robots"
urdf = modelPath + "/solo_description/robots/solo12.urdf"
srdf = modelPath + "/solo_description/srdf/solo.srdf"
vector = pin.StdVec_StdString()
vector.extend(item for item in modelPath)
## Create the robot wrapper from the urdf model (without the free flyer)
self.robot = tsid.RobotWrapper(urdf, vector, pin.JointModelFreeFlyer(),
False)
self.model = self.robot.model()
## Creation of the Invverse Dynamics HQP problem using the robot
## accelerations (base + joints) and the contact forces
self.invdyn = tsid.InverseDynamicsFormulationAccForce(
"tsid", self.robot, False)
# Compute the problem data with a solver based on EiQuadProg
self.invdyn.computeProblemData(t, self.qdes, self.vdes)
# Get the initial data
self.data = self.invdyn.data()
## Task definition
# POSTURE Task
self.postureTask = tsid.TaskJointPosture("task-posture", self.robot)
self.postureTask.setKp(
kp_posture * matlib.ones(self.robot.nv - 6).T) # Proportional gain
self.postureTask.setKd(
2.0 * np.sqrt(kp_posture) *
matlib.ones(self.robot.nv - 6).T) # Derivative gain
# Add the task to the HQP with weight = w_posture, priority level = 0 (as real constraint) and a transition duration = 0.0
self.invdyn.addMotionTask(self.postureTask, w_posture, 1, 0.0)
# COM Task
self.comTask = tsid.TaskComEquality("task-com", self.robot)
self.comTask.setKp(
kp_com * matlib.ones(3).T) # Proportional gain of the CoM task
self.comTask.setKd(2.0 * np.sqrt(kp_com) *
matlib.ones(3).T) # Derivative gain
self.invdyn.addMotionTask(
self.comTask, w_com, 1, 0.0
) # Add the task to the HQP with weight = w_com, priority level = 1 (in the cost function) and a transition duration = 0.0
# LOCK Task
self.lockTask = tsid.TaskJointPosture("task-lock-shoulder", self.robot)
self.lockTask.setKp(kp_lock * matlib.ones(self.robot.nv - 6).T)
self.lockTask.setKd(2.0 * np.sqrt(kp_lock) *
matlib.ones(self.robot.nv - 6).T)
mask = np.matrix(np.zeros(
self.robot.nv -
6)) # Add a mask to take into account only the shoulders joints
for i in [0, 3, 6, 9]:
mask[0, i] = 1
self.lockTask.mask(mask.T)
self.invdyn.addMotionTask(
self.lockTask, w_lock, 0,
0.0) # Add the task as real constraint (priority level = 0)
## CONTACTS
self.contacts = 4 * [None]
for i, name in enumerate(foot_frames):
self.contacts[i] = tsid.ContactPoint(name, self.robot, name,
contactNormal, mu, fMin, fMax)
self.contacts[i].setKp(kp_contact * matlib.ones(3).T)
self.contacts[i].setKd(2.0 * np.sqrt(kp_contact) *
matlib.ones(3).T)
H_ref = self.robot.framePosition(self.data,
self.model.getFrameId(name))
self.contacts[i].setReference(H_ref)
self.contacts[i].useLocalFrame(False)
self.invdyn.addRigidContact(self.contacts[i], w_forceRef, 1.0, 1)
## TSID Trajectory
# POSTURE Task
pin.loadReferenceConfigurations(self.model, srdf, False)
self.q_ref = self.model.referenceConfigurations['straight_standing']
self.trajPosture = tsid.TrajectoryEuclidianConstant(
"traj_joint", self.q_ref[7:])
# Set the trajectory as reference for the posture task
self.samplePosture = self.trajPosture.computeNext()
self.postureTask.setReference(self.samplePosture)
# COM Task
self.com_ref = self.data.com[0].copy() # Initial value of the CoM
self.trajCom = tsid.TrajectoryEuclidianConstant(
"traj_com", self.com_ref)
self.sampleCom = self.trajCom.computeNext()
self.comTask.setReference(self.sampleCom)
# LOCK Task
# The mask is enough to set the shoulder acceleration to 0 because 0 is the initial configuration for the shoulders
trajLock = tsid.TrajectoryEuclidianConstant("traj_lock_shoulder",
self.q_ref[7:])
sampleLock = trajLock.computeNext()
self.lockTask.setReference(sampleLock)
## Initialization of the solver
# Use EiquadprogFast solver
self.solver = tsid.SolverHQuadProgFast("qp solver")
# Resize the solver to fit the number of variables, equality and inequality constraints
self.solver.resize(self.invdyn.nVar, self.invdyn.nEq, self.invdyn.nIn)
def __init__(self, conf, viewer=True):
self.conf = conf
self.contact_frame_names = conf.contact_frame_names
print('Robot files:')
print(conf.urdf)
print(conf.srdf)
vector = pin.StdVec_StdString()
vector.extend(item for item in conf.path)
self.robot = tsid.RobotWrapper(conf.urdf, vector,
pin.JointModelFreeFlyer(), False)
robot = self.robot
self.model = robot.model()
pin.loadReferenceConfigurations(self.model, conf.srdf, False)
self.q0 = q = self.model.referenceConfigurations[
conf.reference_config_q_name]
v = np.zeros(robot.nv)
assert (all([
self.model.existFrame(frame_name)
for frame_name in self.contact_frame_names
]))
invdyn = tsid.InverseDynamicsFormulationAccForce('tsid', robot, False)
invdyn.computeProblemData(0.0, q, v)
data = invdyn.data()
robot.computeAllTerms(data, q, v)
#####################################
# define contact and associated tasks
#####################################
self.contact_frame_ids = [
self.model.getFrameId(frame_name)
for frame_name in self.contact_frame_names
]
self.nc = len(self.contact_frame_ids) # contact number
self.contacts = self.nc * [None]
self.tasks_tracking_foot = self.nc * [None]
self.traj_feet = self.nc * [None]
self.sample_feet = self.nc * [None]
mask = np.ones(6)
if not conf.contact6d:
mask[3:] = 0
for i_foot, (frame_name, fid) in enumerate(
zip(self.contact_frame_names, self.contact_frame_ids)):
Hf_ref = robot.framePosition(data, fid)
if conf.contact6d:
# DEFINE FOOT CONTACT POINTS LOCATION WRT LOCAL FOOT FRAMES
# contact_points = np.ones((3,4)) * conf.lz
contact_points = -np.ones((3, 4)) * conf.lz
contact_points[0, :] = [
-conf.lxn, -conf.lxn, conf.lxp, conf.lxp
]
contact_points[1, :] = [
-conf.lyn, conf.lyp, -conf.lyn, conf.lyp
]
# RIGID CONTACT RIGHT FOOT
self.contacts[i_foot] = tsid.Contact6d(
'contact_{}'.format(frame_name), robot, frame_name,
contact_points, conf.contactNormal, conf.mu, conf.fMin,
conf.fMax)
self.contacts[i_foot].setKp(conf.kp_contact * np.ones(6).T)
self.contacts[i_foot].setKd(2.0 * np.sqrt(conf.kp_contact) *
np.ones(6).T)
self.contacts[i_foot].setReference(Hf_ref)
invdyn.addRigidContact(self.contacts[i_foot], conf.w_forceRef)
else:
# RIGID POINT CONTACTS
self.contacts[i_foot] = tsid.ContactPoint(
'contact_{}'.format(frame_name), robot, frame_name,
conf.contactNormal, conf.mu, conf.fMin, conf.fMax)
self.contacts[i_foot].setKp(conf.kp_contact * np.ones(3))
self.contacts[i_foot].setKd(2.0 * np.sqrt(conf.kp_contact) *
np.ones(3))
self.contacts[i_foot].setReference(Hf_ref)
self.contacts[i_foot].useLocalFrame(conf.useLocalFrame)
invdyn.addRigidContact(self.contacts[i_foot], conf.w_forceRef)
# FEET TRACKING TASKS
self.tasks_tracking_foot[i_foot] = tsid.TaskSE3Equality(
'task-foot{}'.format(i_foot), self.robot,
self.contact_frame_names[i_foot])
self.tasks_tracking_foot[i_foot].setKp(conf.kp_foot * mask)
self.tasks_tracking_foot[i_foot].setKd(
2.0 * np.sqrt(conf.kp_foot) * mask)
self.tasks_tracking_foot[i_foot].setMask(mask)
self.tasks_tracking_foot[i_foot].useLocalFrame(False)
invdyn.addMotionTask(self.tasks_tracking_foot[i_foot], conf.w_foot,
conf.priority_foot, 0.0)
self.traj_feet[i_foot] = tsid.TrajectorySE3Constant(
'traj-foot{}'.format(i_foot), Hf_ref)
self.sample_feet[i_foot] = self.traj_feet[i_foot].computeNext()
#############
# Other tasks
#############
# COM TASK
self.comTask = tsid.TaskComEquality('task-com', robot)
self.comTask.setKp(conf.kp_com * np.ones(3))
self.comTask.setKd(2.0 * np.sqrt(conf.kp_com) * np.ones(3))
invdyn.addMotionTask(self.comTask, conf.w_com, conf.priority_com, 1.0)
# POSTURE TASK
self.postureTask = tsid.TaskJointPosture('task-posture', robot)
self.postureTask.setKp(conf.kp_posture * np.ones(robot.nv - 6))
self.postureTask.setKd(2.0 * np.sqrt(conf.kp_posture) *
np.ones(robot.nv - 6))
invdyn.addMotionTask(self.postureTask, conf.w_posture,
conf.priority_posture, 0.0)
# TRUNK Task
self.trunkTask = tsid.TaskSE3Equality("keepTrunk", robot, 'root_joint')
self.trunkTask.setKp(conf.kp_trunk * np.ones(6))
self.trunkTask.setKd(2.0 * np.sqrt(conf.kp_trunk) * np.ones(6))
# Add a Mask to the task which will select the vector dimensions on which the task will act.
# In this case the trunk configuration is a vector 6d (position and orientation -> SE3)
# Here we set a mask = [0 0 0 1 1 1] so the task on the trunk will act on the orientation of the robot
mask = np.ones(6)
mask[:3] = 0.
self.trunkTask.useLocalFrame(False)
self.trunkTask.setMask(mask)
invdyn.addMotionTask(self.trunkTask, conf.w_trunk, conf.priority_trunk,
0.0)
# TORQUE BOUND TASK
# self.tau_max = conf.tau_max_scaling*robot.model().effortLimit[-robot.na:]
# self.tau_min = -self.tau_max
# actuationBoundsTask = tsid.TaskActuationBounds('task-actuation-bounds', robot)
# actuationBoundsTask.setBounds(self.tau_min, self.tau_max)
# if(conf.w_torque_bounds>0.0):
# invdyn.addActuationTask(actuationBoundsTask, conf.w_torque_bounds, conf.priority_torque_bounds, 0.0)
# JOINT BOUND TASK
# jointBoundsTask = tsid.TaskJointBounds('task-joint-bounds', robot, conf.dt)
# self.v_max = conf.v_max_scaling * robot.model().velocityLimit[-robot.na:]
# self.v_min = -self.v_max
# jointBoundsTask.setVelocityBounds(self.v_min, self.v_max)
# if(conf.w_joint_bounds>0.0):
# invdyn.addMotionTask(jointBoundsTask, conf.w_joint_bounds, conf.priority_joint_bounds, 0.0)
##################################
# Init task reference trajectories
##################################
self.sample_feet = self.nc * [None]
self.sample_feet_pos = self.nc * [None]
self.sample_feet_vel = self.nc * [None]
self.sample_feet_acc = self.nc * [None]
for i_foot, traj in enumerate(self.traj_feet):
self.sample_feet[i_foot] = traj.computeNext()
self.sample_feet_pos[i_foot] = self.sample_feet[i_foot].pos()
self.sample_feet_vel[i_foot] = self.sample_feet[i_foot].vel()
self.sample_feet_acc[i_foot] = self.sample_feet[i_foot].acc()
com_ref = robot.com(data)
self.trajCom = tsid.TrajectoryEuclidianConstant('traj_com', com_ref)
self.sample_com = self.trajCom.computeNext()
q_ref = q[7:]
self.trajPosture = tsid.TrajectoryEuclidianConstant(
'traj_joint', q_ref)
self.postureTask.setReference(self.trajPosture.computeNext())
self.trunk_link_id = self.model.getFrameId('base_link')
R_trunk_init = robot.framePosition(data, self.trunk_link_id).rotation
self.trunk_ref = self.robot.framePosition(data, self.trunk_link_id)
self.trajTrunk = tsid.TrajectorySE3Constant("traj_base_link",
self.trunk_ref)
self.sample_trunk = self.trajTrunk.computeNext()
pos_trunk = np.hstack([np.zeros(3), R_trunk_init.flatten()])
self.sample_trunk.pos()
self.sample_trunk.vel(np.zeros(6))
self.sample_trunk.acc(np.zeros(6))
self.trunkTask.setReference(self.sample_trunk)
self.solver = tsid.SolverHQuadProgFast('qp solver')
self.solver.resize(invdyn.nVar, invdyn.nEq, invdyn.nIn)
self.invdyn = invdyn
self.q = q
self.v = v
self.active_contacts = self.nc * [True]
# for gepetto viewer
if (viewer):
self.robot_display = pin.RobotWrapper.BuildFromURDF(
conf.urdf, [
conf.path,
], pin.JointModelFreeFlyer())
l = subprocess.getstatusoutput(
"ps aux |grep 'gepetto-gui'|grep -v 'grep'|wc -l")
if int(l[1]) == 0:
os.system('gepetto-gui &')
time.sleep(1)
gepetto.corbaserver.Client()
self.robot_display.initViewer(loadModel=True)
self.robot_display.displayCollisions(False)
self.robot_display.displayVisuals(True)
self.robot_display.display(q)
self.gui = self.robot_display.viewer.gui
self.gui.setCameraTransform('python-pinocchio',
conf.CAMERA_TRANSFORM)
self.gui.addFloor('world/floor')
self.gui.setLightingMode('world/floor', 'OFF')
self.gui.addSphere('world/com', conf.SPHERE_RADIUS,
conf.COM_SPHERE_COLOR)
self.gui.addSphere('world/com_ref', conf.REF_SPHERE_RADIUS,
conf.COM_REF_SPHERE_COLOR)
for frame_name in self.contact_frame_names:
self.gui.addSphere('world/{}'.format(frame_name),
conf.SPHERE_RADIUS, conf.F_SPHERE_COLOR)
self.gui.addSphere('world/{}_ref'.format(frame_name),
conf.REF_SPHERE_RADIUS,
conf.F_REF_SPHERE_COLOR)
def __init__(self, q0, omega, t):
self.omega = omega
self.qdes = q0.copy()
self.vdes = np.zeros((8,1))
self.ades = np.zeros((8,1))
self.error = False
kp_foot = 10.0
w_foot = 10.0
########################################################################
# Definition of the Model and TSID problem #
########################################################################
## Set the paths where the urdf and srdf file of the robot are registered
modelPath = "/opt/openrobots/lib/python3.5/site-packages/../../../share/example-robot-data/robots"
urdf = modelPath + "/solo_description/robots/solo.urdf"
srdf = modelPath + "/solo_description/srdf/solo.srdf"
vector = pin.StdVec_StdString()
vector.extend(item for item in modelPath)
## Create the robot wrapper from the urdf model (without the free flyer)
self.robot = tsid.RobotWrapper(urdf, vector, False)
self.model = self.robot.model()
## Creation of the Invverse Dynamics HQP problem using the robot
## accelerations (base + joints) and the contact forces
self.invdyn = tsid.InverseDynamicsFormulationAccForce("tsid", self.robot, False)
# Compute the problem data with a solver based on EiQuadProg
self.invdyn.computeProblemData(t, self.qdes, self.vdes)
# Get the initial data
self.data = self.invdyn.data()
# Task definition
self.FRfootTask = tsid.TaskSE3Equality("FR-foot-placement", self.robot, 'FR_FOOT')
self.FRfootTask.setKp(kp_foot * matlib.ones(6).T)
self.FRfootTask.setKd(2.0 * np.sqrt(kp_foot) * matlib.ones(6).T)
self.FRfootTask.setMask(np.matrix([[1,0,1, 0,0,0]]).T) #set a mask allowing only the transation upon x and z-axis
self.FRfootTask.useLocalFrame(False)
# Add the task to the HQP with weight = w_foot, priority level = 0 (as real constraint) and a transition duration = 0.0
self.invdyn.addMotionTask(self.FRfootTask, w_foot, 1, 0.0)
## TSID Trajectory
pin.forwardKinematics(self.model, self.data, self.qdes)
pin.updateFramePlacements(self.model, self.data)
self.FR_foot_ref = self.robot.framePosition(self.data, self.model.getFrameId('FR_FOOT'))
FRgoalx = self.FR_foot_ref.translation[0,0] + 0.1
FRgoalz = self.FR_foot_ref.translation[2,0] + 0.1
self.FR_foot_goal = self.FR_foot_ref.copy()
self.FR_foot_goal.translation = np.matrix([FRgoalx, self.FR_foot_ref.translation[1,0], FRgoalz]).T
self.trajFRfoot = tsid.TrajectorySE3Constant("traj_FR_foot", self.FR_foot_goal)
# Set the trajectory as reference for the foot positionning task
self.sampleFoot = self.trajFRfoot.computeNext()
self.FRfootTask.setReference(self.sampleFoot)
## Initialization of the solver
# Use EiquadprogFast solver
self.solver = tsid.SolverHQuadProgFast("qp solver")
# Resize the solver to fit the number of variables, equality and inequality constraints
self.solver.resize(self.invdyn.nVar, self.invdyn.nEq, self.invdyn.nIn)
kp_com = 30.0 # proportional gain of center of mass task
kp_posture = 30.0 # proportional gain of joint posture task
kp_RF = 30.0 # proportional gain of right foot motion task
REMOVE_CONTACT_N = 100 # remove right foot contact constraint after REMOVE_CONTACT_N time steps
CONTACT_TRANSITION_TIME = 1.0 # duration of the contact transition (to smoothly get a zero contact force before removing a contact constraint)
DELTA_COM_Y = 0.1 # distance between initial and desired center of mass position in y direction
DELTA_FOOT_Z = 0.1 # desired elevation of right foot in z direction
dt = 0.001 # controller time step
PRINT_N = 500 # print every PRINT_N time steps
DISPLAY_N = 25 # update robot configuration in viwewer every DISPLAY_N time steps
N_SIMULATION = 4000 # number of time steps simulated
filename = str(os.path.dirname(os.path.abspath(__file__)))
path = filename + '/../models/romeo'
urdf = path + '/urdf/romeo.urdf'
vector = se3.StdVec_StdString()
vector.extend(item for item in path)
robot = tsid.RobotWrapper(urdf, vector, se3.JointModelFreeFlyer(), False)
srdf = path + '/srdf/romeo_collision.srdf'
# for gepetto viewer .. but Fix me!!
robot_display = se3.RobotWrapper(urdf, [path, ], se3.JointModelFreeFlyer())
l = commands.getstatusoutput("ps aux |grep 'gepetto-gui'|grep -v 'grep'|wc -l")
if int(l[1]) == 0:
os.system('gepetto-gui &')
time.sleep(1)
cl = gepetto.corbaserver.Client()
gui = cl.gui
robot_display.initDisplay(loadModel=True)
def generateWholeBodyMotion(cs, fullBody=None, viewer=None):
if not viewer:
print "No viewer linked, cannot display end_effector trajectories."
print "Start TSID ... "
rp = RosPack()
urdf = rp.get_path(
cfg.Robot.packageName
) + '/urdf/' + cfg.Robot.urdfName + cfg.Robot.urdfSuffix + '.urdf'
if cfg.WB_VERBOSE:
print "load robot : ", urdf
#srdf = "package://" + package + '/srdf/' + cfg.Robot.urdfName+cfg.Robot.srdfSuffix + '.srdf'
robot = tsid.RobotWrapper(urdf, pin.StdVec_StdString(),
pin.JointModelFreeFlyer(), False)
if cfg.WB_VERBOSE:
print "robot loaded in tsid."
# FIXME : tsid robotWrapper don't have all the required methods, only pinocchio have them
pinRobot = pin.RobotWrapper.BuildFromURDF(urdf, pin.StdVec_StdString(),
pin.JointModelFreeFlyer(), False)
q = cs.contact_phases[0].reference_configurations[0][:robot.nq].copy()
v = np.matrix(np.zeros(robot.nv)).transpose()
t = 0.0 # time
# init states list with initial state (assume joint velocity is null for t=0)
invdyn = tsid.InverseDynamicsFormulationAccForce("tsid", robot, False)
invdyn.computeProblemData(t, q, v)
data = invdyn.data()
if cfg.EFF_CHECK_COLLISION: # initialise object needed to check the motion
from mlp.utils import check_path
validator = check_path.PathChecker(fullBody, cs, len(q),
cfg.WB_VERBOSE)
if cfg.WB_VERBOSE:
print "initialize tasks : "
comTask = tsid.TaskComEquality("task-com", robot)
comTask.setKp(cfg.kp_com * np.matrix(np.ones(3)).transpose())
comTask.setKd(2.0 * np.sqrt(cfg.kp_com) *
np.matrix(np.ones(3)).transpose())
invdyn.addMotionTask(comTask, cfg.w_com, cfg.level_com, 0.0)
com_ref = robot.com(invdyn.data())
trajCom = tsid.TrajectoryEuclidianConstant("traj_com", com_ref)
amTask = tsid.TaskAMEquality("task-am", robot)
amTask.setKp(cfg.kp_am * np.matrix([1., 1., 0.]).T)
amTask.setKd(2.0 * np.sqrt(cfg.kp_am * np.matrix([1., 1., 0.]).T))
invdyn.addTask(amTask, cfg.w_am, cfg.level_am)
trajAM = tsid.TrajectoryEuclidianConstant("traj_am",
np.matrix(np.zeros(3)).T)
postureTask = tsid.TaskJointPosture("task-joint-posture", robot)
postureTask.setKp(cfg.kp_posture * cfg.gain_vector)
postureTask.setKd(2.0 * np.sqrt(cfg.kp_posture * cfg.gain_vector))
postureTask.mask(cfg.masks_posture)
invdyn.addMotionTask(postureTask, cfg.w_posture, cfg.level_posture, 0.0)
q_ref = cfg.IK_REFERENCE_CONFIG
trajPosture = tsid.TrajectoryEuclidianConstant("traj_joint", q_ref[7:])
orientationRootTask = tsid.TaskSE3Equality("task-orientation-root", robot,
'root_joint')
mask = np.matrix(np.ones(6)).transpose()
mask[0:3] = 0
mask[5] = cfg.YAW_ROT_GAIN
orientationRootTask.setKp(cfg.kp_rootOrientation * mask)
orientationRootTask.setKd(2.0 * np.sqrt(cfg.kp_rootOrientation * mask))
invdyn.addMotionTask(orientationRootTask, cfg.w_rootOrientation,
cfg.level_rootOrientation, 0.0)
root_ref = robot.position(data, robot.model().getJointId('root_joint'))
trajRoot = tsid.TrajectorySE3Constant("traj-root", root_ref)
usedEffectors = []
for eeName in cfg.Robot.dict_limb_joint.values():
if isContactEverActive(cs, eeName):
usedEffectors.append(eeName)
# init effector task objects :
dic_effectors_tasks = createEffectorTasksDic(cs, robot)
effectorTraj = tsid.TrajectorySE3Constant(
"traj-effector", SE3.Identity()
) # trajectory doesn't matter as it's only used to get the correct struct and size
# init empty dic to store effectors trajectories :
dic_effectors_trajs = {}
for eeName in usedEffectors:
dic_effectors_trajs.update({eeName: None})
# add initial contacts :
dic_contacts = {}
for eeName in usedEffectors:
if isContactActive(cs.contact_phases[0], eeName):
contact = createContactForEffector(invdyn, robot,
cs.contact_phases[0], eeName)
dic_contacts.update({eeName: contact})
if cfg.PLOT: # init a dict storing all the reference trajectories used (for plotting)
stored_effectors_ref = {}
for eeName in dic_effectors_tasks:
stored_effectors_ref.update({eeName: []})
solver = tsid.SolverHQuadProg("qp solver")
solver.resize(invdyn.nVar, invdyn.nEq, invdyn.nIn)
# define nested function used in control loop
def storeData(k_t, res, q, v, dv, invdyn, sol):
# store current state
res.q_t[:, k_t] = q
res.dq_t[:, k_t] = v
res.ddq_t[:, k_t] = dv
res.tau_t[:, k_t] = invdyn.getActuatorForces(
sol) # actuator forces, with external forces (contact forces)
#store contact info (force and status)
if cfg.IK_store_contact_forces:
for eeName, contact in dic_contacts.iteritems():
if invdyn.checkContact(contact.name, sol):
res.contact_forces[eeName][:,
k_t] = invdyn.getContactForce(
contact.name, sol)
res.contact_normal_force[
eeName][:, k_t] = contact.getNormalForce(
res.contact_forces[eeName][:, k_t])
res.contact_activity[eeName][:, k_t] = 1
# store centroidal info (real one and reference) :
if cfg.IK_store_centroidal:
pcom, vcom, acom = pinRobot.com(q, v, dv)
res.c_t[:, k_t] = pcom
res.dc_t[:, k_t] = vcom
res.ddc_t[:, k_t] = acom
res.L_t[:, k_t] = pinRobot.centroidalMomentum(q, v).angular
#res.dL_t[:,k_t] = pinRobot.centroidalMomentumVariation(q,v,dv) # FIXME : in robot wrapper, use * instead of .dot() for np matrices
pin.dccrba(pinRobot.model, pinRobot.data, q, v)
res.dL_t[:, k_t] = Force(
pinRobot.data.Ag.dot(dv) + pinRobot.data.dAg.dot(v)).angular
# same for reference data :
res.c_reference[:, k_t] = com_desired
res.dc_reference[:, k_t] = vcom_desired
res.ddc_reference[:, k_t] = acom_desired
res.L_reference[:, k_t] = L_desired
res.dL_reference[:, k_t] = dL_desired
if cfg.IK_store_zmp:
tau = pin.rnea(
pinRobot.model, pinRobot.data, q, v, dv
) # tau without external forces, only used for the 6 first
#res.tau_t[:6,k_t] = tau[:6]
phi0 = pinRobot.data.oMi[1].act(Force(tau[:6]))
res.wrench_t[:, k_t] = phi0.vector
res.zmp_t[:, k_t] = shiftZMPtoFloorAltitude(
cs, res.t_t[k_t], phi0, cfg.EXPORT_OPENHRP)
# same but from the 'reference' values :
Mcom = SE3.Identity()
Mcom.translation = com_desired
Fcom = Force.Zero()
Fcom.linear = cfg.MASS * (acom_desired - cfg.GRAVITY)
Fcom.angular = dL_desired
F0 = Mcom.act(Fcom)
res.wrench_reference[:, k_t] = F0.vector
res.zmp_reference[:, k_t] = shiftZMPtoFloorAltitude(
cs, res.t_t[k_t], F0, cfg.EXPORT_OPENHRP)
if cfg.IK_store_effector:
for eeName in usedEffectors: # real position (not reference)
res.effector_trajectories[eeName][:, k_t] = SE3toVec(
getCurrentEffectorPosition(robot, invdyn.data(), eeName))
res.d_effector_trajectories[eeName][:, k_t] = MotiontoVec(
getCurrentEffectorVelocity(robot, invdyn.data(), eeName))
res.dd_effector_trajectories[eeName][:, k_t] = MotiontoVec(
getCurrentEffectorAcceleration(robot, invdyn.data(),
eeName))
return res
def printIntermediate(v, dv, invdyn, sol):
print "Time %.3f" % (t)
for eeName, contact in dic_contacts.iteritems():
if invdyn.checkContact(contact.name, sol):
f = invdyn.getContactForce(contact.name, sol)
print "\tnormal force %s: %.1f" % (contact.name.ljust(
20, '.'), contact.getNormalForce(f))
print "\ttracking err %s: %.3f" % (comTask.name.ljust(
20, '.'), norm(comTask.position_error, 2))
for eeName, traj in dic_effectors_trajs.iteritems():
if traj:
task = dic_effectors_tasks[eeName]
error = task.position_error
if cfg.Robot.cType == "_3_DOF":
error = error[0:3]
print "\ttracking err %s: %.3f" % (task.name.ljust(
20, '.'), norm(error, 2))
print "\t||v||: %.3f\t ||dv||: %.3f" % (norm(v, 2), norm(dv))
def checkDiverge(res, v, dv):
if norm(dv) > 1e6 or norm(v) > 1e6:
print "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
print "/!\ ABORT : controler unstable at t = " + str(t) + " /!\ "
print "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
raise ValueError("ABORT : controler unstable at t = " + str(t))
if math.isnan(norm(dv)) or math.isnan(norm(v)):
print "!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
print "/!\ ABORT : nan at t = " + str(t) + " /!\ "
print "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"
raise ValueError("ABORT : controler unstable at t = " + str(t))
def stopHere():
if cfg.WB_ABORT_WHEN_INVALID:
return res.resize(phase_interval[0]), pinRobot
elif cfg.WB_RETURN_INVALID:
return res.resize(k_t), pinRobot
# time check
dt = cfg.IK_dt
if cfg.WB_VERBOSE:
print "dt : ", dt
res = Result(robot.nq, robot.nv, cfg.IK_dt, eeNames=usedEffectors, cs=cs)
N = res.N
last_display = 0
if cfg.WB_VERBOSE:
print "tsid initialized, start control loop"
#raw_input("Enter to start the motion (motion displayed as it's computed, may be slower than real-time)")
time_start = time.time()
# For each phases, create the necessary task and references trajectories :
for pid in range(cs.size()):
if cfg.WB_VERBOSE:
print "## for phase : ", pid
print "t = ", t
phase = cs.contact_phases[pid]
if pid < cs.size() - 1:
phase_next = cs.contact_phases[pid + 1]
else:
phase_next = None
if pid > 0:
phase_prev = cs.contact_phases[pid - 1]
else:
phase_prev = None
t_phase_begin = res.phases_intervals[pid][0] * dt
t_phase_end = res.phases_intervals[pid][-1] * dt
time_interval = [t_phase_begin, t_phase_end]
if cfg.WB_VERBOSE:
print "time_interval ", time_interval
# generate com ref traj from phase :
com_init = np.matrix(np.zeros((9, 1)))
com_init[0:3, 0] = robot.com(invdyn.data())
com_traj = computeCOMRefFromPhase(phase, time_interval)
am_traj = computeAMRefFromPhase(phase, time_interval)
# add root's orientation ref from reference config :
if cfg.USE_PLANNING_ROOT_ORIENTATION:
if phase_next:
root_traj = trajectories.TrajectorySE3LinearInterp(
SE3FromConfig(phase.reference_configurations[0]),
SE3FromConfig(phase_next.reference_configurations[0]),
time_interval)
else:
root_traj = trajectories.TrajectorySE3LinearInterp(
SE3FromConfig(phase.reference_configurations[0]),
SE3FromConfig(phase.reference_configurations[0]),
time_interval)
else:
# orientation such that the torso orientation is the mean between both feet yaw rotations:
placement_init, placement_end = rootOrientationFromFeetPlacement(
phase, phase_next)
root_traj = trajectories.TrajectorySE3LinearInterp(
placement_init, placement_end, time_interval)
# add newly created contacts :
for eeName in usedEffectors:
if phase_prev and not isContactActive(
phase_prev, eeName) and isContactActive(phase, eeName):
invdyn.removeTask(dic_effectors_tasks[eeName].name,
0.0) # remove pin task for this contact
dic_effectors_trajs.update(
{eeName:
None}) # delete reference trajectory for this task
if cfg.WB_VERBOSE:
print "remove se3 task : " + dic_effectors_tasks[
eeName].name
contact = createContactForEffector(invdyn, robot, phase,
eeName)
dic_contacts.update({eeName: contact})
# add se3 tasks for end effector not in contact that will be in contact next phase:
for eeName, task in dic_effectors_tasks.iteritems():
if phase_next and not isContactActive(
phase, eeName) and isContactActive(phase_next, eeName):
if cfg.WB_VERBOSE:
print "add se3 task for " + eeName
invdyn.addMotionTask(task, cfg.w_eff, cfg.level_eff, 0.0)
#create reference trajectory for this task :
placement_init = getCurrentEffectorPosition(
robot, invdyn.data(), eeName
) #FIXME : adjust orientation in case of 3D contact ...
if cfg.Robot.cType == "_3_DOF":
placement_init.rotation = JointPlacementForEffector(
phase, eeName).rotation
placement_end = JointPlacementForEffector(phase_next, eeName)
ref_traj = generateEndEffectorTraj(time_interval,
placement_init,
placement_end, 0)
if cfg.WB_VERBOSE:
print "t interval : ", time_interval
print "placement Init : ", placement_init
print "placement End : ", placement_end
# display all the effector trajectories for this phase
if viewer and cfg.DISPLAY_ALL_FEET_TRAJ:
display_tools.displaySE3Traj(
ref_traj, viewer.client.gui, viewer.sceneName,
eeName + "_traj_" + str(pid),
cfg.Robot.dict_limb_color_traj[eeName], time_interval,
cfg.Robot.dict_offset[eeName])
viewer.client.gui.setVisibility(
eeName + "_traj_" + str(pid), 'ALWAYS_ON_TOP')
dic_effectors_trajs.update({eeName: ref_traj})
# start removing the contact that will be broken in the next phase :
# (This tell the solver that it should start minimzing the contact force on this contact, and ideally get to 0 at the given time)
for eeName, contact in dic_contacts.iteritems():
if phase_next and isContactActive(
phase, eeName) and not isContactActive(phase_next, eeName):
transition_time = t_phase_end - t - dt / 2.
if cfg.WB_VERBOSE:
print "\nTime %.3f Start breaking contact %s. transition time : %.3f\n" % (
t, contact.name, transition_time)
invdyn.removeRigidContact(contact.name, transition_time)
if cfg.WB_STOP_AT_EACH_PHASE:
raw_input('start simulation')
# save values at the beginning of the current phase
q_begin = q.copy()
v_begin = v.copy()
phaseValid = False
swingPhase = False # will be true if an effector move during this phase
iter_for_phase = -1
# iterate until a valid motion for this phase is found (ie. collision free and which respect joint-limits)
while not phaseValid:
if iter_for_phase >= 0:
# reset values to their value at the beginning of the current phase
q = q_begin.copy()
v = v_begin.copy()
iter_for_phase += 1
if cfg.WB_VERBOSE:
print "Start simulation for phase " + str(
pid) + ", try number : " + str(iter_for_phase)
# loop to generate states (q,v,a) for the current contact phase :
if pid == cs.size() - 1: # last state
phase_interval = res.phases_intervals[pid]
else:
phase_interval = res.phases_intervals[pid][:-1]
for k_t in phase_interval:
t = res.t_t[k_t]
# set traj reference for current time :
# com
sampleCom = trajCom.computeNext()
com_desired = com_traj(t)[0]
vcom_desired = com_traj(t)[1]
acom_desired = com_traj(t)[2]
sampleCom.pos(com_desired)
sampleCom.vel(vcom_desired)
sampleCom.acc(acom_desired)
comTask.setReference(sampleCom)
# am
sampleAM = trajAM.computeNext()
L_desired = am_traj(t)[0]
dL_desired = am_traj(t)[1]
sampleAM.pos(L_desired)
sampleAM.vel(dL_desired)
amTask.setReference(sampleAM)
# posture
samplePosture = trajPosture.computeNext()
#print "postural task ref : ",samplePosture.pos()
postureTask.setReference(samplePosture)
# root orientation :
sampleRoot = trajRoot.computeNext()
sampleRoot.pos(SE3toVec(root_traj(t)[0]))
sampleRoot.vel(MotiontoVec(root_traj(t)[1]))
orientationRootTask.setReference(sampleRoot)
quat_waist = Quaternion(root_traj(t)[0].rotation)
res.waist_orientation_reference[:, k_t] = np.matrix(
[quat_waist.x, quat_waist.y, quat_waist.z, quat_waist.w]).T
if cfg.WB_VERBOSE == 2:
print "### references given : ###"
print "com pos : ", sampleCom.pos()
print "com vel : ", sampleCom.vel()
print "com acc : ", sampleCom.acc()
print "AM pos : ", sampleAM.pos()
print "AM vel : ", sampleAM.vel()
print "root pos : ", sampleRoot.pos()
print "root vel : ", sampleRoot.vel()
# end effector (if they exists)
for eeName, traj in dic_effectors_trajs.iteritems():
if traj:
swingPhase = True # there is an effector motion in this phase
sampleEff = effectorTraj.computeNext()
traj_t = traj(t)
sampleEff.pos(SE3toVec(traj_t[0]))
sampleEff.vel(MotiontoVec(traj_t[1]))
dic_effectors_tasks[eeName].setReference(sampleEff)
if cfg.WB_VERBOSE == 2:
print "effector " + str(eeName) + " pos : " + str(
sampleEff.pos())
print "effector " + str(eeName) + " vel : " + str(
sampleEff.vel())
if cfg.IK_store_effector:
res.effector_references[eeName][:, k_t] = SE3toVec(
traj_t[0])
res.d_effector_references[
eeName][:, k_t] = MotiontoVec(traj_t[1])
res.dd_effector_references[
eeName][:, k_t] = MotiontoVec(traj_t[2])
elif cfg.IK_store_effector:
if k_t == 0:
res.effector_references[eeName][:, k_t] = SE3toVec(
getCurrentEffectorPosition(
robot, invdyn.data(), eeName))
else:
res.effector_references[
eeName][:, k_t] = res.effector_references[
eeName][:, k_t - 1]
res.d_effector_references[eeName][:, k_t] = np.matrix(
np.zeros(6)).T
res.dd_effector_references[eeName][:, k_t] = np.matrix(
np.zeros(6)).T
# solve HQP for the current time
HQPData = invdyn.computeProblemData(t, q, v)
if cfg.WB_VERBOSE and t < phase.time_trajectory[0] + dt:
print "final data for phase ", pid
HQPData.print_all()
sol = solver.solve(HQPData)
dv = invdyn.getAccelerations(sol)
res = storeData(k_t, res, q, v, dv, invdyn, sol)
# update state
v_mean = v + 0.5 * dt * dv
v += dt * dv
q = pin.integrate(robot.model(), q, dt * v_mean)
if cfg.WB_VERBOSE == 2:
print "v = ", v
print "dv = ", dv
if cfg.WB_VERBOSE and int(t / dt) % cfg.IK_PRINT_N == 0:
printIntermediate(v, dv, invdyn, sol)
try:
checkDiverge(res, v, dv)
except ValueError:
return stopHere()
# end while t \in phase_t (loop for the current contact phase)
if swingPhase and cfg.EFF_CHECK_COLLISION:
phaseValid, t_invalid = validator.check_motion(
res.q_t[:, phase_interval[0]:k_t])
#if iter_for_phase < 3 :# FIXME : debug only, force limb-rrt
# phaseValid = False
if not phaseValid:
print "Phase " + str(pid) + " not valid at t = " + str(
t_invalid)
if t_invalid <= cfg.EFF_T_PREDEF or t_invalid >= (
(t_phase_end - t_phase_begin) - cfg.EFF_T_PREDEF):
print "Motion is invalid during predefined phases, cannot change this."
return stopHere()
if effectorCanRetry():
print "Try new end effector trajectory."
try:
for eeName, oldTraj in dic_effectors_trajs.iteritems(
):
if oldTraj: # update the traj in the map
placement_init = JointPlacementForEffector(
phase_prev, eeName)
placement_end = JointPlacementForEffector(
phase_next, eeName)
ref_traj = generateEndEffectorTraj(
time_interval, placement_init,
placement_end, iter_for_phase + 1,
res.q_t[:, phase_interval[0]:k_t],
phase_prev, phase, phase_next,
fullBody, eeName, viewer)
dic_effectors_trajs.update(
{eeName: ref_traj})
if viewer and cfg.DISPLAY_ALL_FEET_TRAJ:
display_tools.displaySE3Traj(
ref_traj, viewer.client.gui,
viewer.sceneName,
eeName + "_traj_" + str(pid), cfg.
Robot.dict_limb_color_traj[eeName],
time_interval,
cfg.Robot.dict_offset[eeName])
viewer.client.gui.setVisibility(
eeName + "_traj_" + str(pid),
'ALWAYS_ON_TOP')
except ValueError, e:
print "ERROR in generateEndEffectorTraj :"
print e.message
return stopHere()
else:
print "End effector method choosen do not allow retries, abort here."
return stopHere()
else: # no effector motions, phase always valid (or bypass the check)
phaseValid = True
if cfg.WB_VERBOSE:
print "Phase " + str(pid) + " valid."
if phaseValid:
# display all the effector trajectories for this phase
if viewer and cfg.DISPLAY_FEET_TRAJ and not cfg.DISPLAY_ALL_FEET_TRAJ:
for eeName, ref_traj in dic_effectors_trajs.iteritems():
if ref_traj:
display_tools.displaySE3Traj(
ref_traj, viewer.client.gui, viewer.sceneName,
eeName + "_traj_" + str(pid),
cfg.Robot.dict_limb_color_traj[eeName],
time_interval, cfg.Robot.dict_offset[eeName])
viewer.client.gui.setVisibility(
eeName + "_traj_" + str(pid), 'ALWAYS_ON_TOP')
if cfg.PLOT: # add current ref_traj to the list for plotting
stored_effectors_ref[eeName] += [ref_traj]