def load_ith_file(self):
results_files = os.listdir(self.results_dir)
print(results_files)
dat = np.load(self.results_dir + results_files[self.i],
allow_pickle=True)
print("Loading results file {}".format(self.results_dir +
results_files[self.i]))
if self.verbose:
print('configuration: {} '.format(dat['conf']))
self.pred_train = dat['y_prime_train']
self.truth_train = dat['y_gold_train']
self.disruptive_train = dat['disruptive_train']
self.pred_test = dat['y_prime_test']
self.truth_test = dat['y_gold_test']
self.disruptive_test = dat['disruptive_test']
self.shot_list_test = ShotList(dat['shot_list_test'][()])
self.shot_list_train = ShotList(dat['shot_list_train'][()])
self.saved_conf = dat['conf'][()]
# all files must agree on T_warning due to output of truth vs.
# normalized shot ttd.
self.conf['data']['T_warning'] = self.saved_conf['data']['T_warning']
for mode in ['test', 'train']:
print('{}: loaded {} shot ({}) disruptive'.format(
mode, self.get_num_shots(mode),
self.get_num_disruptive_shots(mode)))
if self.verbose:
self.print_conf()
def preprocess_from_files(self,shot_files,use_shots):
#all shots, including invalid ones
all_signals = self.conf['paths']['all_signals']
shot_list = ShotList()
shot_list.load_from_shot_list_files_objects(shot_files,all_signals)
shot_list_picked = shot_list.random_sublist(use_shots)
#empty
used_shots = ShotList()
use_cores = max(1,mp.cpu_count()-2)
pool = mp.Pool(use_cores)
print('running in parallel on {} processes'.format(pool._processes))
start_time = time.time()
for (i,shot) in enumerate(pool.imap_unordered(self.preprocess_single_file,shot_list_picked)):
#for (i,shot) in enumerate(map(self.preprocess_single_file,shot_list_picked)):
sys.stdout.write('\r{}/{}'.format(i,len(shot_list_picked)))
used_shots.append_if_valid(shot)
pool.close()
pool.join()
print('Finished Preprocessing {} files in {} seconds'.format(len(shot_list_picked),time.time()-start_time))
print('Omitted {} shots of {} total.'.format(len(shot_list_picked) - len(used_shots),len(shot_list_picked)))
print('{}/{} disruptive shots'.format(used_shots.num_disruptive(),len(used_shots)))
if len(used_shots) == 0:
print("WARNING: All shots were omitted, please ensure raw data is complete and available at {}.".format(self.conf['paths']['signal_prepath']))
return used_shots
def load_shotlists(self):
path = self.get_shot_list_path()
data = np.load(path,encoding="latin1", allow_pickle=True)
shot_list_train = data['shot_list_train'][()]
shot_list_validate = data['shot_list_validate'][()]
shot_list_test = data['shot_list_test'][()]
if isinstance(shot_list_train,ShotList):
return shot_list_train,shot_list_validate,shot_list_test
else:
return ShotList(shot_list_train),ShotList(shot_list_validate),ShotList(shot_list_test)
def create_shot_list_tmp(original_shot,time_points,sigs=None):
shot_list_tmp = ShotList()
T = len(original_shot.ttd)
t_range = np.linspace(0,T-1,time_points,dtype=np.int)
for t in t_range:
new_shot = copy.copy(original_shot)
assert(new_shot.augmentation_fn == None)
new_shot.augmentation_fn = partial(hide_signal_data,t = t,sigs_to_hide=sigs)
#new_shot.number = original_shot.number
shot_list_tmp.append(new_shot)
return shot_list_tmp,t_range
def create_shot_list_tmp(original_shot,time_points,sigs=None):
shot_list_tmp = ShotList()
T = len(original_shot.ttd)
t_range = np.linspace(0,T-1,time_points,dtype=np.int)
for t in t_range:
new_shot = copy.copy(original_shot)
assert(new_shot.augmentation_fn == None)
new_shot.augmentation_fn = partial(hide_signal_data,t = t,sigs_to_hide=sigs)
#new_shot.number = original_shot.number
shot_list_tmp.append(new_shot)
return shot_list_tmp,t_range
def train_on_files(self,
shot_files,
use_shots,
all_machines,
verbose=False):
conf = self.conf
all_signals = conf['paths']['all_signals']
shot_list = ShotList()
shot_list.load_from_shot_list_files_objects(shot_files, all_signals)
shot_list_picked = shot_list.random_sublist(use_shots)
previously_saved, machines_saved = self.previously_saved_stats()
machines_to_compute = all_machines - machines_saved
recompute = conf['data']['recompute_normalization']
if recompute:
machines_to_compute = all_machines
previously_saved = False
if not previously_saved or len(machines_to_compute) > 0:
if previously_saved:
self.load_stats(verbose=True)
print('computing normalization for machines {}'.format(
machines_to_compute))
use_cores = max(1, mp.cpu_count() - 2)
pool = mp.Pool(use_cores)
print('running in parallel on {} processes'.format(
pool._processes))
start_time = time.time()
for (i, stats) in enumerate(
pool.imap_unordered(self.train_on_single_shot,
shot_list_picked)):
# for (i,stats) in
# enumerate(map(self.train_on_single_shot,shot_list_picked)):
if stats.machine in machines_to_compute:
self.incorporate_stats(stats)
self.machines.add(stats.machine)
sys.stdout.write('\r' +
'{}/{}'.format(i, len(shot_list_picked)))
pool.close()
pool.join()
print(
'\nFinished Training Normalizer on ',
'{} files in {} seconds'.format(len(shot_list_picked),
time.time() - start_time))
self.save_stats(verbose=True)
else:
self.load_stats(verbose=verbose)
# print representation of trained Normalizer to stdout:
# Machine, NormalizerName, per-signal normalization stats/params
if verbose:
g.print_unique(self)
def preprocess_from_files(self,shot_files,use_shots):
#all shots, including invalid ones
all_signals = self.conf['paths']['all_signals']
shot_list = ShotList()
shot_list.load_from_shot_list_files_objects(shot_files,all_signals)
shot_list_picked = shot_list.random_sublist(use_shots)
#empty
used_shots = ShotList()
use_cores = max(1,mp.cpu_count()-2)
pool = mp.Pool(use_cores)
print('running in parallel on {} processes'.format(pool._processes))
start_time = time.time()
for (i,shot) in enumerate(pool.imap_unordered(self.preprocess_single_file,shot_list_picked)):
#for (i,shot) in enumerate(map(self.preprocess_single_file,shot_list_picked)):
sys.stdout.write('\r{}/{}'.format(i,len(shot_list_picked)))
used_shots.append_if_valid(shot)
pool.close()
pool.join()
print('Finished Preprocessing {} files in {} seconds'.format(len(shot_list_picked),time.time()-start_time))
print('Omitted {} shots of {} total.'.format(len(shot_list_picked) - len(used_shots),len(shot_list_picked)))
print('{}/{} disruptive shots'.format(used_shots.num_disruptive(),len(used_shots)))
if len(used_shots) == 0:
print("WARNING: All shots were omitted, please ensure raw data is complete and available at {}.".format(self.conf['paths']['signal_prepath']))
return used_shots
def train_on_files(self,shot_files,use_shots,all_machines):
conf = self.conf
all_signals = conf['paths']['all_signals']
shot_list = ShotList()
shot_list.load_from_shot_list_files_objects(shot_files,all_signals)
shot_list_picked = shot_list.random_sublist(use_shots)
previously_saved,machines_saved = self.previously_saved_stats()
machines_to_compute = all_machines - machines_saved
recompute = conf['data']['recompute_normalization']
if recompute:
machines_to_compute = all_machines
previously_saved = False
if not previously_saved or len(machines_to_compute) > 0:
if previously_saved:
self.load_stats()
print('computing normalization for machines {}'.format(machines_to_compute))
use_cores = max(1,mp.cpu_count()-2)
pool = mp.Pool(use_cores)
print('running in parallel on {} processes'.format(pool._processes))
start_time = time.time()
for (i,stats) in enumerate(pool.imap_unordered(self.train_on_single_shot,shot_list_picked)):
#for (i,stats) in enumerate(map(self.train_on_single_shot,shot_list_picked)):
if stats.machine in machines_to_compute:
self.incorporate_stats(stats)
self.machines.add(stats.machine)
sys.stdout.write('\r' + '{}/{}'.format(i,len(shot_list_picked)))
pool.close()
pool.join()
print('Finished Training Normalizer on {} files in {} seconds'.format(len(shot_list_picked),time.time()-start_time))
self.save_stats()
else:
self.load_stats()
print(self)
#####################################################
# NORMALIZATION #
#####################################################
# TODO(KGF): identical in at least 3x files in examples/
# make sure preprocessing has been run, and is saved as a file
if task_index == 0:
# TODO(KGF): check tuple unpack
(shot_list_train, shot_list_validate,
shot_list_test) = guarantee_preprocessed(conf)
comm.Barrier()
(shot_list_train, shot_list_validate,
shot_list_test) = guarantee_preprocessed(conf)
shot_list = sum([l.filter_by_number([shot_num])
for l in [shot_list_train, shot_list_validate,
shot_list_test]], ShotList())
assert(len(shot_list) == 1)
# for s in shot_list.shots:
# s.restore()
def chunks(l, n):
"""Yield successive n-sized chunks from l."""
return[l[i:i + n] for i in range(0, len(l), n)]
def hide_signal_data(shot, t=0, sigs_to_hide=None):
for sig in shot.signals:
if sigs_to_hide is None or (
sigs_to_hide is not None and sig in sigs_to_hide):
shot.signals_dict[sig][t:, :] = shot.signals_dict[sig][t, :]
def apply_bleed_in(conf,shot_list_train,shot_list_validate,shot_list_test):
np.random.seed(2)
num = conf['data']['bleed_in']
new_shots = []
if num > 0:
shot_list_bleed = ShotList()
print('applying bleed in with {} disruptive shots\n'.format(num))
num_total = len(shot_list_test)
num_d = shot_list_test.num_disruptive()
num_nd = num_total - num_d
assert(num_d >= num), "Not enough disruptive shots {} to cover bleed in {}".format(num_d,num)
num_sampled_d = 0
num_sampled_nd = 0
while num_sampled_d < num:
s = shot_list_test.sample_shot()
shot_list_bleed.append(s)
if conf['data']['bleed_in_remove_from_test']:
shot_list_test.remove(s)
if s.is_disruptive:
num_sampled_d += 1
else:
num_sampled_nd += 1
print("Sampled {} shots, {} disruptive, {} nondisruptive".format(num_sampled_nd+num_sampled_d,num_sampled_d,num_sampled_nd))
print("Before adding: training shots: {} validation shots: {}".format(len(shot_list_train),len(shot_list_validate)))
assert(num_sampled_d == num)
if conf['data']['bleed_in_equalize_sets']:#add bleed-in shots to training and validation set repeatedly
print("Applying equalized bleed in")
for shot_list_curr in [shot_list_train,shot_list_validate]:
for i in range(len(shot_list_curr)):
s = shot_list_bleed.sample_shot()
shot_list_curr.append(s)
elif conf['data']['bleed_in_repeat_fac'] > 1:
repeat_fac = conf['data']['bleed_in_repeat_fac']
print("Applying bleed in with repeat factor {}".format(repeat_fac))
num_to_sample = int(round(repeat_fac*len(shot_list_bleed)))
for i in range(num_to_sample):
s = shot_list_bleed.sample_shot()
shot_list_train.append(s)
shot_list_validate.append(s)
else: #add each shot only once
print("Applying bleed in without repetition")
for s in shot_list_bleed:
shot_list_train.append(s)
shot_list_validate.append(s)
print("After adding: training shots: {} validation shots: {}".format(len(shot_list_train),len(shot_list_validate)))
print("Added bleed in shots to training and validation sets")
# if num_d > 0:
# for i in range(num):
# s = shot_list_test.sample_single_class(True)
# shot_list_train.append(s)
# shot_list_validate.append(s)
# if conf['data']['bleed_in_remove_from_test']:
# shot_list_test.remove(s)
# else:
# print('No disruptive shots in test set, omitting bleed in')
# if num_nd > 0:
# for i in range(num):
# s = shot_list_test.sample_single_class(False)
# shot_list_train.append(s)
# shot_list_validate.append(s)
# if conf['data']['bleed_in_remove_from_test']:
# shot_list_test.remove(s)
# else:
# print('No nondisruptive shots in test set, omitting bleed in')
return shot_list_train,shot_list_validate,shot_list_test
def apply_bleed_in(conf, shot_list_train, shot_list_validate, shot_list_test):
np.random.seed(2)
num = conf['data']['bleed_in']
# new_shots = []
if num > 0:
shot_list_bleed = ShotList()
print('applying bleed in with {} disruptive shots\n'.format(num))
# num_total = len(shot_list_test)
num_d = shot_list_test.num_disruptive()
# num_nd = num_total - num_d
assert num_d >= num, (
"Not enough disruptive shots {} to cover bleed in {}".format(
num_d, num))
num_sampled_d = 0
num_sampled_nd = 0
while num_sampled_d < num:
s = shot_list_test.sample_shot()
shot_list_bleed.append(s)
if conf['data']['bleed_in_remove_from_test']:
shot_list_test.remove(s)
if s.is_disruptive:
num_sampled_d += 1
else:
num_sampled_nd += 1
print("Sampled {} shots, {} disruptive, {} nondisruptive".format(
num_sampled_nd + num_sampled_d, num_sampled_d, num_sampled_nd))
print("Before adding: training shots: {} validation shots: {}".format(
len(shot_list_train), len(shot_list_validate)))
assert (num_sampled_d == num)
# add bleed-in shots to training and validation set repeatedly
if conf['data']['bleed_in_equalize_sets']:
print("Applying equalized bleed in")
for shot_list_curr in [shot_list_train, shot_list_validate]:
for i in range(len(shot_list_curr)):
s = shot_list_bleed.sample_shot()
shot_list_curr.append(s)
elif conf['data']['bleed_in_repeat_fac'] > 1:
repeat_fac = conf['data']['bleed_in_repeat_fac']
print("Applying bleed in with repeat factor {}".format(repeat_fac))
num_to_sample = int(round(repeat_fac * len(shot_list_bleed)))
for i in range(num_to_sample):
s = shot_list_bleed.sample_shot()
shot_list_train.append(s)
shot_list_validate.append(s)
else: # add each shot only once
print("Applying bleed in without repetition")
for s in shot_list_bleed:
shot_list_train.append(s)
shot_list_validate.append(s)
print("After adding: training shots: {} validation shots: {}".format(
len(shot_list_train), len(shot_list_validate)))
print("Added bleed in shots to training and validation sets")
# if num_d > 0:
# for i in range(num):
# s = shot_list_test.sample_single_class(True)
# shot_list_train.append(s)
# shot_list_validate.append(s)
# if conf['data']['bleed_in_remove_from_test']:
# shot_list_test.remove(s)
# else:
# print('No disruptive shots in test set, omitting bleed in')
# if num_nd > 0:
# for i in range(num):
# s = shot_list_test.sample_single_class(False)
# shot_list_train.append(s)
# shot_list_validate.append(s)
# if conf['data']['bleed_in_remove_from_test']:
# shot_list_test.remove(s)
# else:
# print('No nondisruptive shots in test set, omitting bleed in')
return shot_list_train, shot_list_validate, shot_list_test
def preprocess_from_files(self, shot_files, use_shots):
# all shots, including invalid ones
all_signals = self.conf['paths']['all_signals']
shot_list = ShotList()
shot_list.load_from_shot_list_files_objects(shot_files, all_signals)
shot_list_picked = shot_list.random_sublist(use_shots)
# empty
used_shots = ShotList()
# TODO(KGF): generalize the follwowing line to perform well on
# architecutres other than CPUs, e.g. KNLs
# min( <desired-maximum-process-count>, max(1,mp.cpu_count()-2) )
use_cores = max(1, mp.cpu_count() - 2)
pool = mp.Pool(use_cores)
print('Running in parallel on {} processes'.format(pool._processes))
start_time = time.time()
for (i, shot) in enumerate(
pool.imap_unordered(self.preprocess_single_file,
shot_list_picked)):
# for (i,shot) in
# enumerate(map(self.preprocess_single_file,shot_list_picked)):
sys.stdout.write('\r{}/{}'.format(i, len(shot_list_picked)))
used_shots.append_if_valid(shot)
pool.close()
pool.join()
print('\nFinished preprocessing {} files in {} seconds'.format(
len(shot_list_picked),
time.time() - start_time))
print('Using {} shots ({} disruptive shots)'.format(
len(used_shots), used_shots.num_disruptive()))
print('Omitted {} shots of {} total shots'.format(
len(shot_list_picked) - len(used_shots), len(shot_list_picked)))
print(
'Omitted {} disruptive shots of {} total disruptive shots'.format(
shot_list_picked.num_disruptive() -
used_shots.num_disruptive(),
shot_list_picked.num_disruptive()))
if len(used_shots) == 0:
print("WARNING: All shots were omitted, please ensure raw data "
" is complete and available at {}.".format(
self.conf['paths']['signal_prepath']))
return used_shots
custom_path = None
if only_predict:
custom_path = sys.argv[1]
shot_num = int(sys.argv[2])
print("predicting using path {} on shot {}".format(custom_path,shot_num))
assert(only_predict)
#####################################################
####################Normalization####################
#####################################################
if task_index == 0: #make sure preprocessing has been run, and is saved as a file
shot_list_train,shot_list_validate,shot_list_test = guarantee_preprocessed(conf)
comm.Barrier()
shot_list_train,shot_list_validate,shot_list_test = guarantee_preprocessed(conf)
shot_list = sum([l.filter_by_number([shot_num]) for l in [shot_list_train,shot_list_validate,shot_list_test]],ShotList())
assert(len(shot_list) == 1)
# for s in shot_list.shots:
# s.restore()
def chunks(l, n):
"""Yield successive n-sized chunks from l."""
return[ l[i:i + n] for i in range(0, len(l), n)]
def hide_signal_data(shot,t=0,sigs_to_hide=None):
for sig in shot.signals:
if sigs_to_hide is None or (sigs_to_hide is not None and sig in sigs_to_hide):
shot.signals_dict[sig][t:,:] = shot.signals_dict[sig][t,:]
def create_shot_list_tmp(original_shot,time_points,sigs=None):
shot_list_tmp = ShotList()
