Esempio n. 1
0
def main():
    """
    NAME
       qqunf.py

    DESCRIPTION
       makes qq plot from input data against uniform distribution

    SYNTAX
       qqunf.py [command line options]

    OPTIONS
        -h help message
        -f FILE, specify file on command line

    """
    fmt, plot = 'svg', 0
    if '-h' in sys.argv:  # check if help is needed
        print main.__doc__
        sys.exit()  # graceful quit
    elif '-f' in sys.argv:  # ask for filename
        ind = sys.argv.index('-f')
        file = sys.argv[ind + 1]
        f = open(file, 'rU')
        input = f.readlines()
    Data = []
    for line in input:
        line.replace('\n', '')
        if '\t' in line:  # read in the data from standard input
            rec = line.split('\t')  # split each line on space to get records
        else:
            rec = line.split()  # split each line on space to get records
        Data.append(float(rec[0]))


#
    if len(Data) >= 10:
        QQ = {'unf1': 1}
        pmagplotlib.plot_init(QQ['unf1'], 5, 5)
        pmagplotlib.plotQQunf(QQ['unf1'], Data, 'QQ-Uniform')  # make plot
    else:
        print 'you need N> 10'
        sys.exit()
    pmagplotlib.drawFIGS(QQ)
    files = {}
    for key in QQ.keys():
        files[key] = key + '.' + fmt
    if pmagplotlib.isServer:
        black = '#000000'
        purple = '#800080'
        titles = {}
        titles['eq'] = 'Equal Area Plot'
        EQ = pmagplotlib.addBorders(EQ, titles, black, purple)
        pmagplotlib.saveP(QQ, files)
    elif plot == 1:
        files['qq'] = file + '.' + fmt
        pmagplotlib.saveP(QQ, files)
    else:
        ans = raw_input(" S[a]ve to save plot, [q]uit without saving:  ")
        if ans == "a": pmagplotlib.saveP(QQ, files)
Esempio n. 2
0
def main():
    """
    NAME
       qqunf.py

    DESCRIPTION
       makes qq plot from input data against uniform distribution

    SYNTAX
       qqunf.py [command line options]

    OPTIONS
        -h help message
        -f FILE, specify file on command line

    """
    fmt,plot='svg',0
    if '-h' in sys.argv: # check if help is needed
        print main.__doc__
        sys.exit() # graceful quit
    elif '-f' in sys.argv: # ask for filename
        ind=sys.argv.index('-f')
        file=sys.argv[ind+1]
        f=open(file,'rU')
        input=f.readlines()
    Data=[]
    for line in input:
        line.replace('\n','')
        if '\t' in line:   # read in the data from standard input
            rec=line.split('\t') # split each line on space to get records
        else:
            rec=line.split() # split each line on space to get records
        Data.append(float(rec[0]))
    
#
    if len(Data) >=10: 
        QQ={'unf1':1}
        pmagplotlib.plot_init(QQ['unf1'],5,5)
        pmagplotlib.plotQQunf(QQ['unf1'],Data,'QQ-Uniform') # make plot
    else:
        print 'you need N> 10'
        sys.exit()
    pmagplotlib.drawFIGS(QQ) 
    files={}
    for key in QQ.keys():
        files[key]=key+'.'+fmt 
    if pmagplotlib.isServer:
        black     = '#000000'
        purple    = '#800080'
        titles={}
        titles['eq']='Equal Area Plot'
        EQ = pmagplotlib.addBorders(EQ,titles,black,purple)
        pmagplotlib.saveP(QQ,files)
    elif plot==1:
        files['qq']=file+'.'+fmt 
        pmagplotlib.saveP(QQ,files)
    else:
        ans=raw_input(" S[a]ve to save plot, [q]uit without saving:  ")
        if ans=="a": pmagplotlib.saveP(QQ,files)
Esempio n. 3
0
def main():
    """
    NAME
        plot_2cdfs.py

    DESCRIPTION
        makes plots of cdfs of data in input file 

    SYNTAX
        plot_2cdfs.py [-h][command line options]

    OPTIONS
        -h prints help message and quits
        -f FILE1 FILE2
        -t TITLE
        -fmt [svg,eps,png,pdf,jpg..] specify format of output figure, default is svg
        
    """
    fmt = 'svg'
    title = ""
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-f' in sys.argv:
        ind = sys.argv.index('-f')
        file = sys.argv[ind + 1]
        X = numpy.loadtxt(file)
        file = sys.argv[ind + 2]
        X2 = numpy.loadtxt(file)


#    else:
#       X=numpy.loadtxt(sys.stdin,dtype=numpy.float)
    else:
        print '-f option required'
        print main.__doc__
        sys.exit()
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt = sys.argv[ind + 1]
    if '-t' in sys.argv:
        ind = sys.argv.index('-t')
        title = sys.argv[ind + 1]
    CDF = {'X': 1}
    pmagplotlib.plot_init(CDF['X'], 5, 5)
    pmagplotlib.plotCDF(CDF['X'], X, '', 'r', '')
    pmagplotlib.plotCDF(CDF['X'], X2, title, 'b', '')
    D, p = scipy.stats.ks_2samp(X, X2)
    if p >= .05:
        print D, p, ' not rejected at 95%'
    else:
        print D, p, ' rejected at 95%'
    pmagplotlib.drawFIGS(CDF)
    ans = raw_input('S[a]ve  plot, <Return> to quit ')
    if ans == 'a':
        files = {'X': 'CDF_.' + fmt}
        pmagplotlib.saveP(CDF, files)
Esempio n. 4
0
def main():
    """
    NAME
        plot_2cdfs.py

    DESCRIPTION
        makes plots of cdfs of data in input file 

    SYNTAX
        plot_2cdfs.py [-h][command line options]

    OPTIONS
        -h prints help message and quits
        -f FILE1 FILE2
        -t TITLE
        -fmt [svg,eps,png,pdf,jpg..] specify format of output figure, default is svg
        
    """
    fmt = "svg"
    title = ""
    if "-h" in sys.argv:
        print main.__doc__
        sys.exit()
    if "-f" in sys.argv:
        ind = sys.argv.index("-f")
        file = sys.argv[ind + 1]
        X = numpy.loadtxt(file)
        file = sys.argv[ind + 2]
        X2 = numpy.loadtxt(file)
    #    else:
    #       X=numpy.loadtxt(sys.stdin,dtype=numpy.float)
    else:
        print "-f option required"
        print main.__doc__
        sys.exit()
    if "-fmt" in sys.argv:
        ind = sys.argv.index("-fmt")
        fmt = sys.argv[ind + 1]
    if "-t" in sys.argv:
        ind = sys.argv.index("-t")
        title = sys.argv[ind + 1]
    CDF = {"X": 1}
    pmagplotlib.plot_init(CDF["X"], 5, 5)
    pmagplotlib.plotCDF(CDF["X"], X, "", "r", "")
    pmagplotlib.plotCDF(CDF["X"], X2, title, "b", "")
    D, p = scipy.stats.ks_2samp(X, X2)
    if p >= 0.05:
        print D, p, " not rejected at 95%"
    else:
        print D, p, " rejected at 95%"
    pmagplotlib.drawFIGS(CDF)
    ans = raw_input("S[a]ve  plot, <Return> to quit ")
    if ans == "a":
        files = {"X": "CDF_." + fmt}
        pmagplotlib.saveP(CDF, files)
Esempio n. 5
0
def main():
    """
    NAME
        plot_cdf.py

    DESCRIPTION
        makes plots of cdfs of data in input file 

    SYNTAX
        plot_cdf.py [-h][command line options]

    OPTIONS
        -h prints help message and quits
        -f FILE
        -t TITLE
        -fmt [svg,eps,png,pdf,jpg..] specify format of output figure, default is svg
        -sav saves plot and quits
        
    """
    fmt, plot = 'svg', 0
    title = ""
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-sav' in sys.argv: plot = 1
    if '-f' in sys.argv:
        ind = sys.argv.index('-f')
        file = sys.argv[ind + 1]
        X = numpy.loadtxt(file)


#    else:
#       X=numpy.loadtxt(sys.stdin,dtype=numpy.float)
    else:
        print '-f option required'
        print main.__doc__
        sys.exit()
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt = sys.argv[ind + 1]
    if '-t' in sys.argv:
        ind = sys.argv.index('-t')
        title = sys.argv[ind + 1]
    CDF = {'X': 1}
    pmagplotlib.plot_init(CDF['X'], 5, 5)
    pmagplotlib.plotCDF(CDF['X'], X, title, 'r', '')
    files = {'X': 'CDF_.' + fmt}
    if plot == 0:
        pmagplotlib.drawFIGS(CDF)
        ans = raw_input('S[a]ve  plot, <Return> to quit ')
        if ans == 'a':
            pmagplotlib.saveP(CDF, files)
    else:
        pmagplotlib.saveP(CDF, files)
Esempio n. 6
0
def main():
    """
    NAME
        plot_cdf.py

    DESCRIPTION
        makes plots of cdfs of data in input file 

    SYNTAX
        plot_cdf.py [-h][command line options]

    OPTIONS
        -h prints help message and quits
        -f FILE
        -t TITLE
        -fmt [svg,eps,png,pdf,jpg..] specify format of output figure, default is svg
        -sav saves plot and quits
        
    """
    fmt,plot='svg',0
    title=""
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-sav' in sys.argv:plot=1
    if '-f' in sys.argv:
       ind=sys.argv.index('-f')
       file=sys.argv[ind+1] 
       X=numpy.loadtxt(file)
#    else:
#       X=numpy.loadtxt(sys.stdin,dtype=numpy.float)
    else:
       print '-f option required'
       print main.__doc__
       sys.exit()
    if '-fmt' in sys.argv:
       ind=sys.argv.index('-fmt')
       fmt=sys.argv[ind+1] 
    if '-t' in sys.argv:
       ind=sys.argv.index('-t')
       title=sys.argv[ind+1] 
    CDF={'X':1}
    pmagplotlib.plot_init(CDF['X'],5,5)
    pmagplotlib.plotCDF(CDF['X'],X,title,'r','')
    files={'X':'CDF_.'+fmt}
    if plot==0:
        pmagplotlib.drawFIGS(CDF)
        ans= raw_input('S[a]ve  plot, <Return> to quit ')
        if ans=='a':
            pmagplotlib.saveP(CDF,files)
    else:
        pmagplotlib.saveP(CDF,files)
Esempio n. 7
0
def main():
    """
    NAME
       plotdi_a.py

    DESCRIPTION
       plots equal area projection  from dec inc data and fisher mean, cone of confidence

    INPUT FORMAT
       takes dec, inc, alpha95 as first three columns in space delimited file

    SYNTAX
       plotdi_a.py [-i][-f FILE] 

    OPTIONS
        -f FILE to read file name from command line
        -fmt [png,jpg,eps,pdf,svg] set plot file format ['svg' is default]
        -sav save plot and quit

    """
    fmt,plot='svg',0
    if len(sys.argv) > 0:
        if '-h' in sys.argv: # check if help is needed
            print(main.__doc__)
            sys.exit() # graceful quit
        if '-fmt' in sys.argv:
            ind=sys.argv.index('-fmt')
            fmt=sys.argv[ind+1]
        if '-sav' in sys.argv:plot=1
        if '-f' in sys.argv:
            ind=sys.argv.index('-f')
            file=sys.argv[ind+1]
            f=open(file,'r')
            data=f.readlines()
        else:
            data=sys.stdin.readlines() # read in data from standard input
    DIs,Pars=[],[]
    for line in data:   # read in the data from standard input
        pars=[]
        rec=line.split() # split each line on space to get records
        DIs.append([float(rec[0]),float(rec[1])])
        pars.append(float(rec[0]))
        pars.append(float(rec[1]))
        pars.append(float(rec[2]))
        pars.append(float(rec[0]))
        isign=old_div(abs(float(rec[1])),float(rec[1]))
        pars.append(float(rec[1])-isign*90.) #Beta inc
        pars.append(float(rec[2])) # gamma
        pars.append(float(rec[0])+90.) # Beta dec
        pars.append(0.) #Beta inc
        Pars.append(pars)
#
    EQ={'eq':1} # make plot dictionary
    pmagplotlib.plot_init(EQ['eq'],5,5)
    title='Equal area projection'
    pmagplotlib.plotEQ(EQ['eq'],DIs,title)# plot directions
    for k in range(len(Pars)):
        pmagplotlib.plotELL(EQ['eq'],Pars[k],'b',0,1) # plot ellipses
    files={}
    for key in list(EQ.keys()):
        files[key]=key+'.'+fmt 
    titles={}
    titles['eq']='Equal Area Plot'
    if pmagplotlib.isServer:
        black     = '#000000'
        purple    = '#800080'
        EQ = pmagplotlib.addBorders(EQ,titles,black,purple)
        pmagplotlib.saveP(EQ,files)
    elif plot==0:
        pmagplotlib.drawFIGS(EQ)
        ans=input(" S[a]ve to save plot, [q]uit, Return to continue:  ")
        if ans=="q": sys.exit()
        if ans=="a": 
            pmagplotlib.saveP(EQ,files) 
    else:
        pmagplotlib.saveP(EQ,files) 
Esempio n. 8
0
def main():
    """
    NAME
       plotdi_e.py

    DESCRIPTION
       plots equal area projection  from dec inc data and cones of confidence 
           (Fisher, kent or Bingham or bootstrap).

    INPUT FORMAT
       takes dec/inc as first two columns in space delimited file

    SYNTAX
       plotdi_e.py [command line options]

    OPTIONS
        -h prints help message and quits
        -i for interactive parameter entry
        -f FILE, sets input filename on command line 
        -Fish plots unit vector mean direction, alpha95
        -Bing plots Principal direction, Bingham confidence ellipse
        -Kent plots unit vector mean direction, confidence ellipse
        -Boot E plots unit vector mean direction, bootstrapped confidence ellipse
        -Boot V plots  unit vector mean direction, distribution of bootstrapped means

    """
    dist = 'F'  # default distribution is Fisherian
    mode = 1
    EQ = {'eq': 1}
    if len(sys.argv) > 0:
        if '-h' in sys.argv:  # check if help is needed
            print main.__doc__
            sys.exit()  # graceful quit
        if '-i' in sys.argv:  # ask for filename
            file = raw_input("Enter file name with dec, inc data: ")
            dist = raw_input(
                "Enter desired distrubution: [Fish]er, [Bing]ham, [Kent] [Boot] [default is Fisher]: "
            )
            if dist == "": dist = "F"
            if dist == "Boot":
                type = raw_input(
                    " Ellipses or distribution of vectors? [E]/V ")
                if type == "" or type == "E":
                    dist = "BE"
                else:
                    dist = "BE"
        else:
            #
            if '-f' in sys.argv:
                ind = sys.argv.index('-f')
                file = sys.argv[ind + 1]
            else:
                print 'you must specify a file name'
                print main.__doc__
                sys.exit()
            if '-Bing' in sys.argv: dist = 'B'
            if '-Kent' in sys.argv: dist = 'K'
            if '-Boot' in sys.argv:
                ind = sys.argv.index('-Boot')
                type = sys.argv[ind + 1]
                if type == 'E':
                    dist = 'BE'
                elif type == 'V':
                    dist = 'BV'
                    EQ['bdirs'] = 2
                    pmagplotlib.plot_init(EQ['bdirs'], 5, 5)
                else:
                    print main.__doc__
                    sys.exit()
    pmagplotlib.plot_init(EQ['eq'], 5, 5)
    #
    # get to work
    f = open(file, 'r')
    data = f.readlines()
    #
    DIs = []  # set up list for dec inc data
    DiRecs = []
    pars = []
    nDIs, rDIs, npars, rpars = [], [], [], []
    mode = 1
    for line in data:  # read in the data from standard input
        DiRec = {}
        rec = line.split()  # split each line on space to get records
        DIs.append((float(rec[0]), float(rec[1]), 1.))
        DiRec['dec'] = rec[0]
        DiRec['inc'] = rec[1]
        DiRec['direction_type'] = 'l'
        DiRecs.append(DiRec)
    # split into two modes
    ppars = pmag.doprinc(DIs)  # get principal directions
    for rec in DIs:
        angle = pmag.angle([rec[0], rec[1]], [ppars['dec'], ppars['inc']])
        if angle > 90.:
            rDIs.append(rec)
        else:
            nDIs.append(rec)
    if dist == 'B':  # do on whole dataset
        title = "Bingham confidence ellipse"
        bpars = pmag.dobingham(DIs)
        for key in bpars.keys():
            if key != 'n': print "    ", key, '%7.1f' % (bpars[key])
            if key == 'n': print "    ", key, '       %i' % (bpars[key])
        npars.append(bpars['dec'])
        npars.append(bpars['inc'])
        npars.append(bpars['Zeta'])
        npars.append(bpars['Zdec'])
        npars.append(bpars['Zinc'])
        npars.append(bpars['Eta'])
        npars.append(bpars['Edec'])
        npars.append(bpars['Einc'])
    if dist == 'F':
        title = "Fisher confidence cone"
        if len(nDIs) > 3:
            fpars = pmag.fisher_mean(nDIs)
            print "mode ", mode
            for key in fpars.keys():
                if key != 'n': print "    ", key, '%7.1f' % (fpars[key])
                if key == 'n': print "    ", key, '       %i' % (fpars[key])
            mode += 1
            npars.append(fpars['dec'])
            npars.append(fpars['inc'])
            npars.append(fpars['alpha95'])  # Beta
            npars.append(fpars['dec'])
            isign = abs(fpars['inc']) / fpars['inc']
            npars.append(fpars['inc'] - isign * 90.)  #Beta inc
            npars.append(fpars['alpha95'])  # gamma
            npars.append(fpars['dec'] + 90.)  # Beta dec
            npars.append(0.)  #Beta inc
        if len(rDIs) > 3:
            fpars = pmag.fisher_mean(rDIs)
            print "mode ", mode
            for key in fpars.keys():
                if key != 'n': print "    ", key, '%7.1f' % (fpars[key])
                if key == 'n': print "    ", key, '       %i' % (fpars[key])
            mode += 1
            rpars.append(fpars['dec'])
            rpars.append(fpars['inc'])
            rpars.append(fpars['alpha95'])  # Beta
            rpars.append(fpars['dec'])
            isign = abs(fpars['inc']) / fpars['inc']
            rpars.append(fpars['inc'] - isign * 90.)  #Beta inc
            rpars.append(fpars['alpha95'])  # gamma
            rpars.append(fpars['dec'] + 90.)  # Beta dec
            rpars.append(0.)  #Beta inc
    if dist == 'K':
        title = "Kent confidence ellipse"
        if len(nDIs) > 3:
            kpars = pmag.dokent(nDIs, len(nDIs))
            print "mode ", mode
            for key in kpars.keys():
                if key != 'n': print "    ", key, '%7.1f' % (kpars[key])
                if key == 'n': print "    ", key, '       %i' % (kpars[key])
            mode += 1
            npars.append(kpars['dec'])
            npars.append(kpars['inc'])
            npars.append(kpars['Zeta'])
            npars.append(kpars['Zdec'])
            npars.append(kpars['Zinc'])
            npars.append(kpars['Eta'])
            npars.append(kpars['Edec'])
            npars.append(kpars['Einc'])
        if len(rDIs) > 3:
            kpars = pmag.dokent(rDIs, len(rDIs))
            print "mode ", mode
            for key in kpars.keys():
                if key != 'n': print "    ", key, '%7.1f' % (kpars[key])
                if key == 'n': print "    ", key, '       %i' % (kpars[key])
            mode += 1
            rpars.append(kpars['dec'])
            rpars.append(kpars['inc'])
            rpars.append(kpars['Zeta'])
            rpars.append(kpars['Zdec'])
            rpars.append(kpars['Zinc'])
            rpars.append(kpars['Eta'])
            rpars.append(kpars['Edec'])
            rpars.append(kpars['Einc'])
    else:  # assume bootstrap
        if dist == 'BE':
            if len(nDIs) > 5:
                BnDIs = pmag.di_boot(nDIs)
                Bkpars = pmag.dokent(BnDIs, 1.)
                print "mode ", mode
                for key in Bkpars.keys():
                    if key != 'n': print "    ", key, '%7.1f' % (Bkpars[key])
                    if key == 'n':
                        print "    ", key, '       %i' % (Bkpars[key])
                mode += 1
                npars.append(Bkpars['dec'])
                npars.append(Bkpars['inc'])
                npars.append(Bkpars['Zeta'])
                npars.append(Bkpars['Zdec'])
                npars.append(Bkpars['Zinc'])
                npars.append(Bkpars['Eta'])
                npars.append(Bkpars['Edec'])
                npars.append(Bkpars['Einc'])
            if len(rDIs) > 5:
                BrDIs = pmag.di_boot(rDIs)
                Bkpars = pmag.dokent(BrDIs, 1.)
                print "mode ", mode
                for key in Bkpars.keys():
                    if key != 'n': print "    ", key, '%7.1f' % (Bkpars[key])
                    if key == 'n':
                        print "    ", key, '       %i' % (Bkpars[key])
                mode += 1
                rpars.append(Bkpars['dec'])
                rpars.append(Bkpars['inc'])
                rpars.append(Bkpars['Zeta'])
                rpars.append(Bkpars['Zdec'])
                rpars.append(Bkpars['Zinc'])
                rpars.append(Bkpars['Eta'])
                rpars.append(Bkpars['Edec'])
                rpars.append(Bkpars['Einc'])
            title = "Bootstrapped confidence ellipse"
        elif dist == 'BV':
            if len(nDIs) > 5:
                pmagplotlib.plotEQ(EQ['eq'], nDIs, 'Data')
                BnDIs = pmag.di_boot(nDIs)
                pmagplotlib.plotEQ(EQ['bdirs'], BnDIs,
                                   'Bootstrapped Eigenvectors')
            if len(rDIs) > 5:
                BrDIs = pmag.di_boot(rDIs)
                if len(nDIs) > 5:  # plot on existing plots
                    pmagplotlib.plotDI(EQ['eq'], rDIs)
                    pmagplotlib.plotDI(EQ['bdirs'], BrDIs)
                else:
                    pmagplotlib.plotEQ(EQ['eq'], rDIs, 'Data')
                    pmagplotlib.plotEQ(EQ['bdirs'], BrDIs,
                                       'Bootstrapped Eigenvectors')
            pmagplotlib.drawFIGS(EQ)
            ans = raw_input('s[a]ve, [q]uit ')
            if ans == 'q': sys.exit()
            if ans == 'a':
                files = {}
                for key in EQ.keys():
                    files[key] = 'BE_' + key + '.svg'
                pmagplotlib.saveP(EQ, files)
            sys.exit()
    if len(nDIs) > 5:
        pmagplotlib.plotCONF(EQ['eq'], title, DiRecs, npars, 1)
        if len(rDIs) > 5 and dist != 'B':
            pmagplotlib.plotCONF(EQ['eq'], title, [], rpars, 0)
    elif len(rDIs) > 5 and dist != 'B':
        pmagplotlib.plotCONF(EQ['eq'], title, DiRecs, rpars, 1)
    pmagplotlib.drawFIGS(EQ)
    ans = raw_input('s[a]ve, [q]uit ')
    if ans == 'q': sys.exit()
    if ans == 'a':
        files = {}
        for key in EQ.keys():
            files[key] = key + '.svg'
        pmagplotlib.saveP(EQ, files)
Esempio n. 9
0
def main():
    """
    NAME
       eqarea.py

    DESCRIPTION
       makes equal area projections from declination/inclination data

    INPUT FORMAT
       takes dec/inc as first two columns in space delimited file
   
    SYNTAX
       eqarea.py [options]

    OPTIONS
        -f FILE, specify file on command line 
        -sav save figure and quit
        -fmt [svg,jpg,png,pdf] set figure format [default is svg]
        -s  SIZE specify symbol size - default is 20
        -Lsym  SHAPE  COLOR specify shape and color for lower hemisphere
        -Usym  SHAPE  COLOR specify shape and color for upper hemisphere
          shapes:  's': square,'o': circle,'^,>,v,<': [up,right,down,left] triangle, 'd': diamond, 
                   'p': pentagram, 'h': hexagon, '8': octagon, '+': plus, 'x': cross
          colors:  [b]lue,[g]reen,[r]ed,[c]yan,[m]agenta,[y]ellow,blac[k],[w]hite

    """
    title = ""
    files, fmt = {}, 'svg'
    sym = {'lower': ['o', 'r'], 'upper': ['o', 'w']}
    plot = 0
    if '-h' in sys.argv:  # check if help is needed
        print main.__doc__
        sys.exit()  # graceful quit
    if '-sav' in sys.argv: plot = 1
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt = sys.argv[ind + 1]
    if '-s' in sys.argv:
        ind = sys.argv.index('-s')
        sym['size'] = int(sys.argv[ind + 1])
    else:
        sym['size'] = 20
    if '-Lsym' in sys.argv:
        ind = sys.argv.index('-Lsym')
        sym['lower'][0] = sys.argv[ind + 1]
        sym['lower'][1] = sys.argv[ind + 2]
    if '-Usym' in sys.argv:
        ind = sys.argv.index('-Usym')
        sym['upper'][0] = sys.argv[ind + 1]
        sym['upper'][1] = sys.argv[ind + 2]
    if '-f' in sys.argv:  # ask for filename
        ind = sys.argv.index('-f')
        file = sys.argv[ind + 1]
    else:
        print main.__doc__
        print ' \n   -f option required'
        sys.exit()  # graceful quit
    DI = numpy.loadtxt(file)
    EQ = {'eq': 1}
    pmagplotlib.plot_init(EQ['eq'], 5, 5)
    pmagplotlib.plotEQsym(EQ['eq'], DI, 'Equal Area Plot', sym)  # make plot
    if plot == 0: pmagplotlib.drawFIGS(EQ)  # make it visible
    for key in EQ.keys():
        files[key] = key + '.' + fmt
    if pmagplotlib.isServer:
        black = '#000000'
        purple = '#800080'
        titles = {}
        titles['eq'] = 'Equal Area Plot'
        EQ = pmagplotlib.addBorders(EQ, titles, black, purple)
        pmagplotlib.saveP(EQ, files)
    elif plot == 1:
        files['eq'] = file + '.' + fmt
        pmagplotlib.saveP(EQ, files)
    else:
        ans = raw_input(" S[a]ve to save plot, [q]uit without saving:  ")
        if ans == "a": pmagplotlib.saveP(EQ, files)
Esempio n. 10
0
def main():
    """
    NAME
        quick_hyst.py

    DESCRIPTION
        makes plots of hysteresis data

    SYNTAX
        quick_hyst.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f: specify input file, default is measurements.txt
        -spc SPEC: specify specimen name to plot and quit
        -sav save all plots and quit
        -fmt [png,svg,eps,jpg]
    """
    args = sys.argv
    if "-h" in args:
        print(main.__doc__)
        sys.exit()
    plots = 0
    pltspec = ""
    verbose = pmagplotlib.verbose
    #version_num = pmag.get_version()
    dir_path = pmag.get_named_arg_from_sys('-WD', '.')
    dir_path = os.path.realpath(dir_path)
    meas_file = pmag.get_named_arg_from_sys('-f', 'measurements.txt')
    fmt = pmag.get_named_arg_from_sys('-fmt', 'png')
    if '-sav' in args:
        verbose = 0
        plots = 1
    if '-spc' in args:
        ind = args.index("-spc")
        pltspec = args[ind + 1]
        verbose = 0
        plots = 1
    #
    con = nb.Contribution(dir_path,
                          read_tables=['measurements'],
                          custom_filenames={'measurements': meas_file})
    # get as much name data as possible (used for naming plots)
    if not 'measurements' in con.tables:
        print("-W- No measurement file found")
        return
    con.propagate_location_to_measurements()

    if 'measurements' not in con.tables:
        print(main.__doc__)
        print('bad file')
        sys.exit()
    meas_container = con.tables['measurements']
    #meas_df = meas_container.df

    #
    # initialize some variables
    # define figure numbers for hyst,deltaM,DdeltaM curves
    HystRecs = []
    HDD = {}
    HDD['hyst'] = 1
    pmagplotlib.plot_init(HDD['hyst'], 5, 5)
    #
    # get list of unique experiment names and specimen names
    #
    sids = []
    hyst_data = meas_container.get_records_for_code('LP-HYS')
    #experiment_names = hyst_data['experiment_name'].unique()
    if not len(hyst_data):
        print("-W- No hysteresis data found")
        return
    sids = hyst_data['specimen'].unique()

    # if 'treat_temp' is provided, use that value, otherwise assume 300
    hyst_data['treat_temp'].where(hyst_data['treat_temp'].notnull(),
                                  '300',
                                  inplace=True)
    # start at first specimen, or at provided specimen ('-spc')
    k = 0
    if pltspec != "":
        try:
            print(sids)
            k = list(sids).index(pltspec)
        except ValueError:
            print('-W- No specimen named: {}.'.format(pltspec))
            print('-W- Please provide a valid specimen name')
            return
    intlist = ['magn_moment', 'magn_volume', 'magn_mass']

    while k < len(sids):
        locname, site, sample, synth = '', '', '', ''
        s = sids[k]
        if verbose:
            print(s, k + 1, 'out of ', len(sids))
        # B, M for hysteresis, Bdcd,Mdcd for irm-dcd data
        B, M = [], []
        # get all measurements for this specimen
        spec = hyst_data[hyst_data['specimen'] == s]
        # get names
        if 'location' in spec:
            locname = spec['location'][0]
        if 'site' in spec:
            site = spec['sample'][0]
        if 'sample' in spec:
            sample = spec['sample'][0]

        # get all records with non-blank values in any intlist column
        # find intensity data
        for int_column in intlist:
            if int_column in spec.columns:
                int_col = int_column
                break
        meas_data = spec[spec[int_column].notnull()]
        if len(meas_data) == 0:
            break
        #
        c = ['k-', 'b-', 'c-', 'g-', 'm-', 'r-', 'y-']
        cnum = 0
        Temps = []
        xlab, ylab, title = '', '', ''
        Temps = meas_data['treat_temp'].unique()
        for t in Temps:
            print('working on t: ', t)
            t_data = meas_data[meas_data['treat_temp'] == t]
            m = int_col
            B = t_data['meas_field_dc'].astype(float).values
            M = t_data[m].astype(float).values
            # now plot the hysteresis curve(s)
            #
            if len(B) > 0:
                B = numpy.array(B)
                M = numpy.array(M)
                if t == Temps[-1]:
                    xlab = 'Field (T)'
                    ylab = m
                    title = 'Hysteresis: ' + s
                if t == Temps[0]:
                    pmagplotlib.clearFIG(HDD['hyst'])
                pmagplotlib.plotXY(HDD['hyst'],
                                   B,
                                   M,
                                   sym=c[cnum],
                                   xlab=xlab,
                                   ylab=ylab,
                                   title=title)
                pmagplotlib.plotXY(HDD['hyst'], [1.1 * B.min(), 1.1 * B.max()],
                                   [0, 0],
                                   sym='k-',
                                   xlab=xlab,
                                   ylab=ylab,
                                   title=title)
                pmagplotlib.plotXY(HDD['hyst'], [0, 0],
                                   [1.1 * M.min(), 1.1 * M.max()],
                                   sym='k-',
                                   xlab=xlab,
                                   ylab=ylab,
                                   title=title)
                if verbose:
                    pmagplotlib.drawFIGS(HDD)
                cnum += 1
                if cnum == len(c):
                    cnum = 0

#
        files = {}
        if plots:
            if pltspec != "":
                s = pltspec
            for key in list(HDD.keys()):
                if pmagplotlib.isServer:
                    if synth == '':
                        files[
                            key] = "LO:_" + locname + '_SI:_' + site + '_SA:_' + sample + '_SP:_' + s + '_TY:_' + key + '_.' + fmt
                    else:
                        files[
                            key] = 'SY:_' + synth + '_TY:_' + key + '_.' + fmt
                else:
                    if synth == '':
                        filename = ''
                        for item in [locname, site, sample, s, key]:
                            if item:
                                item = item.replace(' ', '_')
                                filename += item + '_'
                        if filename.endswith('_'):
                            filename = filename[:-1]
                        filename += ".{}".format(fmt)
                        files[key] = filename
                    else:
                        files[key] = "{}_{}.{}".format(synth, key, fmt)

            pmagplotlib.saveP(HDD, files)
            if pltspec != "":
                sys.exit()
        if verbose:
            pmagplotlib.drawFIGS(HDD)
            ans = input(
                "S[a]ve plots, [s]pecimen name, [q]uit, <return> to continue\n "
            )
            if ans == "a":
                files = {}
                for key in list(HDD.keys()):
                    if pmagplotlib.isServer:  # use server plot naming convention
                        files[
                            key] = "LO:_" + locname + '_SI:_' + site + '_SA:_' + sample + '_SP:_' + s + '_TY:_' + key + '_.' + fmt
                    else:  # use more readable plot naming convention
                        filename = ''
                        for item in [locname, site, sample, s, key]:
                            if item:
                                item = item.replace(' ', '_')
                                filename += item + '_'
                        if filename.endswith('_'):
                            filename = filename[:-1]
                        filename += ".{}".format(fmt)
                        files[key] = filename

                pmagplotlib.saveP(HDD, files)
            if ans == '':
                k += 1
            if ans == "p":
                del HystRecs[-1]
                k -= 1
            if ans == 'q':
                print("Good bye")
                sys.exit()
            if ans == 's':
                keepon = 1
                specimen = input(
                    'Enter desired specimen name (or first part there of): ')
                while keepon == 1:
                    try:
                        k = sids.index(specimen)
                        keepon = 0
                    except:
                        tmplist = []
                        for qq in range(len(sids)):
                            if specimen in sids[qq]:
                                tmplist.append(sids[qq])
                        print(specimen, " not found, but this was: ")
                        print(tmplist)
                        specimen = input('Select one or try again\n ')
                        k = sids.index(specimen)
        else:
            k += 1
        if len(B) == 0:
            if verbose:
                print('skipping this one - no hysteresis data')
            k += 1
Esempio n. 11
0
def main():
    """
    NAME
        dmag_magic.py

    DESCRIPTION
       plots intensity decay curves for demagnetization experiments

    SYNTAX
        dmag_magic -h [command line options]

    INPUT 
       takes magic formatted magic_measurements.txt files

    OPTIONS
        -h prints help message and quits
        -f FILE: specify input file, default is: magic_measurements.txt
        -obj OBJ: specify  object  [loc, sit, sam, spc] for plot, default is by location
        -LT [AF,T,M]: specify lab treatment type, default AF
        -XLP [PI]: exclude specific  lab protocols (for example, method codes like LP-PI)
        -N do not normalize by NRM magnetization
        -sav save plots silently and quit
        -fmt [svg,jpg,png,pdf] set figure format [default is svg]
    NOTE
        loc: location (study); sit: site; sam: sample; spc: specimen
    """
    FIG={} # plot dictionary
    FIG['demag']=1 # demag is figure 1
    in_file,plot_key,LT='magic_measurements.txt','er_location_name',"LT-AF-Z"
    XLP=""
    norm=1
    LT='LT-AF-Z'
    units,dmag_key='T','treatment_ac_field'
    plot=0
    fmt='svg'
    if len(sys.argv)>1:
        if '-h' in sys.argv:
            print main.__doc__
            sys.exit()
        if '-N' in sys.argv: norm=0
        if '-sav' in sys.argv: 
            plot=1
        if '-f' in sys.argv:
            ind=sys.argv.index("-f")
            in_file=sys.argv[ind+1]
        if '-fmt' in sys.argv:
            ind=sys.argv.index("-fmt")
            fmt=sys.argv[ind+1]
        if '-obj' in sys.argv:
            ind=sys.argv.index('-obj')
            plot_by=sys.argv[ind+1]
            if plot_by=='sit':plot_key='er_site_name'
            if plot_by=='sam':plot_key='er_sample_name'
            if plot_by=='spc':plot_key='er_specimen_name'
        if '-XLP' in sys.argv:
            ind=sys.argv.index("-XLP")
            XLP=sys.argv[ind+1] # get lab protocol for excluding
        if '-LT' in sys.argv:
            ind=sys.argv.index("-LT")
            LT='LT-'+sys.argv[ind+1]+'-Z' # get lab treatment for plotting
            if  LT=='LT-T-Z':
                units,dmag_key='K','treatment_temp'
            elif  LT=='LT-AF-Z':
                units,dmag_key='T','treatment_ac_field'
            elif  LT=='LT-M-Z':
                units,dmag_key='J','treatment_mw_energy'
            else:
                units='U'
    data,file_type=pmag.magic_read(in_file)
    sids=pmag.get_specs(data)
    pmagplotlib.plot_init(FIG['demag'],5,5)
    print len(data),' records read from ',in_file
    #
    #
    # find desired intensity data
    #
    #
    plotlist,intlist=[],['measurement_magnitude','measurement_magn_moment','measurement_magn_volume','measurement_magn_mass']
    IntMeths=[]
    FixData=[]
    for  rec in data:
        meths=[]
        methcodes=rec['magic_method_codes'].split(':')
        for meth in methcodes:meths.append(meth.strip())
        for key in rec.keys():
            if key in intlist and rec[key]!="":
                if key not in IntMeths:IntMeths.append(key)
                if rec[plot_key] not in plotlist and LT in meths: plotlist.append(rec[plot_key])
                if 'measurement_flag' not in rec.keys():rec['measurement_flag']='g'
                FixData.append(rec)
        plotlist.sort()
    if len(IntMeths)==0:
        print 'No intensity information found'
        sys.exit()
    data=FixData
    int_key=IntMeths[0] # plot first intensity method found - normalized to initial value anyway - doesn't matter which used
    for plt in plotlist:
        if plot==0: print plt,'plotting by: ',plot_key
        PLTblock=pmag.get_dictitem(data,plot_key,plt,'T') # fish out all the data for this type of plot
        PLTblock=pmag.get_dictitem(PLTblock,'magic_method_codes',LT,'has') # fish out all the dmag for this experiment type
        PLTblock=pmag.get_dictitem(PLTblock,int_key,'','F') # get all with this intensity key non-blank
        if XLP!="":PLTblock=pmag.get_dictitem(PLTblock,'magic_method_codes',XLP,'not') # reject data with XLP in method_code
        if len(PLTblock)>2:
            title=PLTblock[0][plot_key]
            spcs=[]
            for rec in PLTblock:
                if rec['er_specimen_name'] not in spcs:spcs.append(rec['er_specimen_name'])
            for spc in spcs:
                SPCblock=pmag.get_dictitem(PLTblock,'er_specimen_name',spc,'T') # plot specimen by specimen
                INTblock=[]
                for rec in SPCblock:
                    INTblock.append([float(rec[dmag_key]),0,0,float(rec[int_key]),1,rec['measurement_flag']])
                if len(INTblock)>2:
                    pmagplotlib.plotMT(FIG['demag'],INTblock,title,0,units,norm)
            if plot==1:
                files={}
                for key in FIG.keys():
                    files[key]=title+'_'+LT+'.'+fmt
                pmagplotlib.saveP(FIG,files) 
                sys.exit()
            else:
                pmagplotlib.drawFIGS(FIG)
                ans=raw_input(" S[a]ve to save plot, [q]uit,  Return to continue:  ")
                if ans=='q':sys.exit()
                if ans=="a": 
                    files={}
                    for key in FIG.keys():
                        files[key]=title+'_'+LT+'.svg' 
                    pmagplotlib.saveP(FIG,files) 
            pmagplotlib.clearFIG(FIG['demag'])
Esempio n. 12
0
def main():
    """
    NAME 
        basemap_magic.py
        NB:  this program no longer maintained - use plot_mapPTS.py for greater functionality

    DESCRIPTION
        makes a map of locations in er_sites.txt
 
    SYNTAX
        basemap_magic.py  [command line options]

    OPTIONS
        -h prints help message and quits
        -f SFILE, specify er_sites.txt or pmag_results.txt format file
        -res [c,l,i,h] specify resolution (crude,low,intermediate,high)
        -etp plot the etopo20 topographic mesh
        -pad [LAT LON]  pad bounding box by LAT/LON  (default is [.5 .5] degrees)
        -grd SPACE specify grid spacing
        -prj [lcc] , specify projection (lcc=lambert conic conformable), default is mercator
        -n print site names (default is not)
        -l print location names (default is not)
        -o color ocean blue/land green (default is not)
        -R don't plot details of rivers
        -B don't plot national/state  boundaries, etc.
        -sav save plot and quit quietly
        -fmt [png,svg,eps,jpg,pdf] specify format for output, default is pdf     
    DEFAULTS
        SFILE: 'er_sites.txt'
        resolution: intermediate
        saved images are in pdf
    """
    dir_path='.'
    sites_file='er_sites.txt'
    ocean=0
    res='i'
    proj='merc'
    prn_name=0
    prn_loc=0
    fancy=0
    rivers,boundaries=0,0
    padlon,padlat,gridspace,details=.5,.5,.5,1
    fmt='pdf'
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-f' in sys.argv:
        ind = sys.argv.index('-f')
        sites_file=sys.argv[ind+1]
    if '-res' in sys.argv:
        ind = sys.argv.index('-res')
        res=sys.argv[ind+1]
    if '-etp' in sys.argv:fancy=1
    if '-n' in sys.argv:prn_name=1
    if '-l' in sys.argv:prn_loc=1
    if '-o' in sys.argv:ocean=1
    if '-R' in sys.argv:rivers=0
    if '-B' in sys.argv:boundaries=0
    if '-prj' in sys.argv:
        ind = sys.argv.index('-prj')
        proj=sys.argv[ind+1]
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt=sys.argv[ind+1]
    verbose=pmagplotlib.verbose
    if '-sav' in sys.argv: 
        verbose=0
    if '-pad' in sys.argv:
        ind = sys.argv.index('-pad')
        padlat=float(sys.argv[ind+1])
        padlon=float(sys.argv[ind+2])
    if '-grd' in sys.argv:
        ind = sys.argv.index('-grd')
        gridspace=float(sys.argv[ind+1])
    if '-WD' in sys.argv:
        ind = sys.argv.index('-WD')
        dir_path=sys.argv[ind+1]
    sites_file=dir_path+'/'+sites_file
    location=""
    FIG={'map':1}
    pmagplotlib.plot_init(FIG['map'],6,6)
    # read in er_sites file
    Sites,file_type=pmag.magic_read(sites_file)
    if 'results' in file_type:
        latkey='average_lat'
        lonkey='average_lon'
        namekey='pmag_result_name'
        lockey='er_location_names'
    else:
        latkey='site_lat'
        lonkey='site_lon'
        namekey='er_site_name'
        lockey='er_location_name'
    lats,lons=[],[]
    slats,slons=[],[]
    names,locs=[],[]
    for site in Sites:
        if prn_loc==1 and location=="":location=site['er_location_name']
        lats.append(float(site[latkey]))
        l=float(site[lonkey])
        if l<0:l=l+360. # make positive
        lons.append(l)
        if prn_name==1:names.append(site[namekey])
        if prn_loc==1:locs.append(site[lockey])
    for lat in lats:slats.append(lat)
    for lon in lons:slons.append(lon)
    Opts={'res':res,'proj':proj,'loc_name':locs,'padlon':padlon,'padlat':padlat,'latmin':numpy.min(slats)-padlat,'latmax':numpy.max(slats)+padlat,'lonmin':numpy.min(slons)-padlon,'lonmax':numpy.max(slons)+padlon,'sym':'ro','boundinglat':0.,'pltgrid':1.}
    Opts['lon_0']=0.5*(numpy.min(slons)+numpy.max(slons))
    Opts['lat_0']=0.5*(numpy.min(slats)+numpy.max(slats))
    Opts['names']=names
    Opts['gridspace']=gridspace
    Opts['details']={'coasts':1,'rivers':1,'states':1,'countries':1,'ocean':0} 
    if ocean==1:Opts['details']['ocean']=1
    if rivers==1: Opts['details']['rivers']=0
    if boundaries==1:
        Opts['details']['states']=0
        Opts['details']['countries']=0
    Opts['details']['fancy']=fancy
    pmagplotlib.plotMAP(FIG['map'],lats,lons,Opts)
    if verbose:pmagplotlib.drawFIGS(FIG)
    files={}
    for key in FIG.keys():
        files[key]='Site_map'+'.'+fmt
    if pmagplotlib.isServer:
        black     = '#000000'
        purple    = '#800080'
        titles={}
        titles['map']='Site Map'
        FIG = pmagplotlib.addBorders(FIG,titles,black,purple)
        pmagplotlib.saveP(FIG,files)
    elif verbose:
        ans=raw_input(" S[a]ve to save plot, Return to quit:  ")
        if ans=="a":
            pmagplotlib.saveP(FIG,files)
    else:
        pmagplotlib.saveP(FIG,files)
Esempio n. 13
0
def main():
    """
    NAME
        trmaq_magic.py

    DESCTIPTION
        does non-linear trm acquisisiton correction
  
    SYNTAX
        trmaq_magic.py [-h][-i][command line options]

    OPTIONS
        -h prints help message and quits
        -i allows interactive setting of file names
        -f MFILE, sets magic_measurements input file
        -ft TSPEC, sets thellier_specimens input file
        -F OUT, sets output for non-linear TRM acquisition corrected data


    DEFAULTS
        MFILE: trmaq_measurements.txt
        TSPEC: thellier_specimens.txt
        OUT: NLT_specimens.txt
    """
    meas_file='trmaq_measurements.txt'
    tspec="thellier_specimens.txt"
    output='NLT_specimens.txt'
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-i' in sys.argv:
        meas_file=raw_input("Input magic_measurements file name? [trmaq_measurements.txt] ")
        if meas_file=="":meas_file="trmaq_measurements.txt" 
        tspec=raw_input(" thellier_specimens file name? [thellier_specimens.txt] ")
        if tspec=="":tspec="thellier_specimens.txt" 
        output=raw_input("File for non-linear TRM adjusted specimen data: [NLTspecimens.txt] ")
        if output=="":output="NLT_specimens.txt"
    if '-f' in sys.argv:
        ind=sys.argv.index('-f')
        meas_file=sys.argv[ind+1]
    if '-ft' in sys.argv:
        ind=sys.argv.index('-ft')
        tspec=sys.argv[ind+1]
    if '-F' in sys.argv:
        ind=sys.argv.index('-F')
        output=sys.argv[ind+1]
    # 
    PLT={'aq':1}
    pmagplotlib.plot_init(PLT['aq'],5,5)
    #
    # get name of file from command line
    #
    comment=""
    #
    #
    meas_data,file_type=pmag.magic_read(meas_file)
    if file_type != 'magic_measurements':
        print file_type
        print file_type,"This is not a valid magic_measurements file " 
        sys.exit()
    sids=pmag.get_specs(meas_data)
    specimen=0
    #
    # read in thellier_specimen data
    #
    nrm,file_type=pmag.magic_read(tspec)
    PmagSpecRecs=[]
    while specimen < len(sids):
    #
    # find corresoponding paleointensity data for this specimen
    #
        s=sids[specimen]
        blab,best="",""
        for nrec in nrm:   # pick out the Banc data for this spec
            if nrec["er_specimen_name"]==s:
                blab=float(nrec["specimen_lab_field_dc"])
                best=float(nrec["specimen_int"])
                TrmRec=nrec
                break
        if blab=="":
            print "skipping ",s," : no best "
            specimen+=1
        else:
            print sids[specimen],specimen+1, 'of ', len(sids),'Best = ',best*1e6
            MeasRecs=[]
    #
    # find the data from the meas_data file for this specimen
    #
            for rec in meas_data:
                if rec["er_specimen_name"]==s:
                    meths=rec["magic_method_codes"].split(":")
                    methcodes=[]
                    for meth in meths:
                        methcodes.append(meth.strip()) 
                    if "LP-TRM" in methcodes: MeasRecs.append(rec)
            if len(MeasRecs) <2:
               specimen+=1
               print 'skipping specimen -  no trm acquisition data ', s
    #
    #  collect info for the PmagSpecRec dictionary
    #
            else:
                TRMs,Bs=[],[]
                for rec in MeasRecs:
                    Bs.append(float(rec['treatment_dc_field']))
                    TRMs.append(float(rec['measurement_magn_moment']))
                NLpars=nlt.NLtrm(Bs,TRMs,best,blab,0) # calculate best fit parameters through TRM acquisition data, and get new banc
    #
                Mp,Bp=[],[]
                for k in  range(int(max(Bs)*1e6)):
                    Bp.append(float(k)*1e-6)
                    npred=nlt.TRM(Bp[-1],NLpars['xopt'][0],NLpars['xopt'][1]) # predicted NRM for this field
                    Mp.append(npred)
                pmagplotlib.plotTRM(PLT['aq'],Bs,TRMs,Bp,Mp,NLpars,rec['magic_experiment_name'])
                pmagplotlib.drawFIGS(PLT)
                print 'Banc= ',float(NLpars['banc'])*1e6
                trmTC={}
                for key in TrmRec.keys():
                    trmTC[key]=TrmRec[key] # copy of info from thellier_specimens record
                trmTC['specimen_int']='%8.3e'%(NLpars['banc'])
                trmTC['magic_method_codes']=TrmRec["magic_method_codes"]+":DA-NL"
                PmagSpecRecs.append(trmTC)
                ans=raw_input("Return for next specimen, s[a]ve plot  ")
                if ans=='a':
                    Name={'aq':rec['er_specimen_name']+'_TRM.svg'}
                    pmagplotlib.saveP(PLT,Name)
                specimen+=1
    pmag.magic_write(output,PmagSpecRecs,'pmag_specimens')
Esempio n. 14
0
def main():
    """
    NAME
        quick_hyst.py

    DESCRIPTION
        makes plots of hysteresis data

    SYNTAX
        quick_hyst.py [command line options]

    OPTIONS
        -h prints help message and quits
        -usr USER:   identify user, default is ""
        -f: specify input file, default is magic_measurements.txt
        -spc SPEC: specify specimen name to plot and quit
        -sav save all plots and quit
        -fmt [png,svg,eps,jpg]
    """
    args=sys.argv
    PLT=1
    plots=0
    user,meas_file="","magic_measurements.txt"
    pltspec=""
    dir_path='.'
    fmt='png'
    verbose=pmagplotlib.verbose
    print 'verbose?', verbose
    version_num=pmag.get_version()
    if '-WD' in args:
        ind=args.index('-WD')
        dir_path=args[ind+1]
    if "-h" in args:
        print main.__doc__
        sys.exit()
    if "-usr" in args:
        ind=args.index("-usr")
        user=args[ind+1]
    if '-f' in args:
        ind=args.index("-f")
        meas_file=args[ind+1]
    if '-sav' in args:
        verbose=0
        plots=1
    if '-spc' in args:
        ind=args.index("-spc")
        pltspec= args[ind+1]
        verbose=0
        plots=1
    if '-fmt' in args:
        ind=args.index("-fmt")
        fmt=args[ind+1]
    meas_file=dir_path+'/'+meas_file
    print 'verbose', verbose
    #
    #
    meas_data,file_type=pmag.magic_read(meas_file)
    if file_type!='magic_measurements':
        print main.__doc__
        print 'bad file'
        sys.exit()
    #
    # initialize some variables
    # define figure numbers for hyst,deltaM,DdeltaM curves
    HystRecs,RemRecs=[],[]
    HDD={}
    HDD['hyst']=1
    pmagplotlib.plot_init(HDD['hyst'],5,5)
    #
    # get list of unique experiment names and specimen names
    #
    experiment_names,sids=[],[]
    hyst_data=pmag.get_dictitem(meas_data,'magic_method_codes','LP-HYS','has') # get all hysteresis data
    for rec in hyst_data:
        if 'er_synthetic_name' in rec.keys() and rec['er_synthetic_name']!="":
            rec['er_specimen_name']=rec['er_synthetic_name']
        if rec['magic_experiment_name'] not in experiment_names:experiment_names.append(rec['magic_experiment_name'])
        if rec['er_specimen_name'] not in sids:sids.append(rec['er_specimen_name'])
        if 'measurement_temp' not in rec.keys(): rec['measurement_temp']='300' # assume room T measurement unless otherwise specified
    #
    k=0
    if pltspec!="":
        k=sids.index(pltspec)
    intlist=['measurement_magnitude','measurement_magn_moment','measurement_magn_volume','measurement_magn_mass']
    while k < len(sids):
        locname,site,sample,synth='','','',''
        s=sids[k]
        hmeths=[]
        if verbose:print s, k+1 , 'out of ',len(sids)
    #
    #
        B,M=[],[] #B,M for hysteresis, Bdcd,Mdcd for irm-dcd data
        spec=pmag.get_dictitem(hyst_data,'er_specimen_name',s,'T') # get all measurements for this specimen
        if 'er_location_name' in spec[0].keys():
            locname=spec[0]['er_location_name']
        if 'er_site_name' in spec[0].keys():
            site=spec[0]['er_site_name']
        if 'er_sample_name' in spec[0].keys():
            sample=spec[0]['er_sample_name']
        if 'er_synthetic_name' in spec[0].keys():
            synth=spec[0]['er_synthetic_name']
        for m in intlist:
            meas_data=pmag.get_dictitem(spec,m,'','F') # get all non-blank data for this specimen
            if len(meas_data)>0: break
        c=['k-','b-','c-','g-','m-','r-','y-']
        cnum=0
        if len(meas_data)>0:
            Temps=[]
            xlab,ylab,title='','',''
            for rec in meas_data: 
                if rec['measurement_temp'] not  in Temps:Temps.append(rec['measurement_temp'])
            for t in Temps:
              print 'working on t: ',t
              t_data=pmag.get_dictitem(meas_data,'measurement_temp',t,'T')
              B,M=[],[]
              for rec in t_data: 
                B.append(float(rec['measurement_lab_field_dc']))
                M.append(float(rec[m]))
    # now plot the hysteresis curve(s)
    #
              if len(B)>0: 
                    B=numpy.array(B)
                    M=numpy.array(M)
                    if t==Temps[-1]:
                        xlab='Field (T)'
                        ylab=m
                        title='Hysteresis: '+s
                    if t==Temps[0]:
                        pmagplotlib.clearFIG(HDD['hyst'])
                    pmagplotlib.plotXY(HDD['hyst'],B,M,sym=c[cnum],xlab=xlab,ylab=ylab,title=title) 
                    pmagplotlib.plotXY(HDD['hyst'],[1.1*B.min(),1.1*B.max()],[0,0],sym='k-',xlab=xlab,ylab=ylab,title=title) 
                    pmagplotlib.plotXY(HDD['hyst'],[0,0],[1.1*M.min(),1.1*M.max()],sym='k-',xlab=xlab,ylab=ylab,title=title) 
                    if verbose:pmagplotlib.drawFIGS(HDD)
                    cnum+=1
                    if cnum==len(c):cnum=0
    #
        files={}
        if plots:
            if pltspec!="":s=pltspec
            files={}
            for key in HDD.keys():
                if synth=='':
                    files[key]="LO:_"+locname+'_SI:_'+site+'_SA:_'+sample+'_SP:_'+s+'_TY:_'+key+'_.'+fmt
                else:
                    files[key]='SY:_'+synth+'_TY:_'+key+'_.'+fmt
            pmagplotlib.saveP(HDD,files)
            if pltspec!="":sys.exit()
        if verbose:
            pmagplotlib.drawFIGS(HDD)
            ans=raw_input("S[a]ve plots, [s]pecimen name, [q]uit, <return> to continue\n ")
            if ans=="a":
                files={}
                for key in HDD.keys():
                    files[key]="LO:_"+locname+'_SI:_'+site+'_SA:_'+sample+'_SP:_'+s+'_TY:_'+key+'_.'+fmt
                pmagplotlib.saveP(HDD,files)
            if ans=='':k+=1
            if ans=="p":
       	        del HystRecs[-1]
    	        k-=1
            if  ans=='q': 
    	        print "Good bye"
    	        sys.exit()
            if ans=='s':
                keepon=1
                specimen=raw_input('Enter desired specimen name (or first part there of): ')
                while keepon==1:
                    try:
                        k =sids.index(specimen)
                        keepon=0
                    except:
                        tmplist=[]
                        for qq in range(len(sids)):
                            if specimen in sids[qq]:tmplist.append(sids[qq])
                        print specimen," not found, but this was: "
                        print tmplist
                        specimen=raw_input('Select one or try again\n ')
                        k =sids.index(specimen)
        else:
            k+=1
        if len(B)==0:
    	    if verbose:print 'skipping this one - no hysteresis data'
       	    k+=1
Esempio n. 15
0
def main():
    """
    NAME 
        cont_rot.py 

    DESCRIPTION
        rotates continental fragments according to specified Euler pole
 
    SYNTAX
        cont_rot.py [command line options]

    OPTIONS
        -h prints help and quits
        -con [af, congo, kala, aus, balt, eur, ind, sam, ant, grn, lau, nam, gond] , specify colon delimited list of continents to be displayed, e.g., af, af:aus], etc
        -age use finite rotations of Torsvik et al. 2008 for specific age (5 Ma increments <325Ma)
             rotates to paleomagnetic reference frame 
             available conts: [congo kala aus eur ind sam ant grn nam]
        -sac include rotation of south african craton to pmag reference
        -sym [ro, bs, g^, r., b-, etc.] [1,5,10] symbol and size for continent
           colors are r=red,b=blue,g=green, etc.
           symbols are '.' for points, ^, for triangle, s for square, etc.
            -, for lines, -- for dotted lines, see matplotlib online documentation for plot()
        -eye  ELAT ELON [specify eyeball location]
        -pfr  PLAT PLON OMEGA  [specify pole of finite rotation lat,lon and degrees]
        -ffr FFILE, specifies series of finite rotations 
           vector in tab delimited file 
        -sr treat poles as sequential rotations 
        -fpp PFILE, specifies series of paleopoles from which
           euler poles can be calculated: vector in tab delimited file 
        -pt LAT LON,  specify a point to rotate along with continent
        -fpt PTFILE, specifies file with a series of points to be plotted
        -res [c,l,i,h] specify resolution (crude, low, intermediate, high]
        -fmt [png,jpg,svg,pdf] format for saved figure - pdf is default
        -sav saves plots and quits
        -prj PROJ,  specify one of the supported projections: (see basemap.py online documentation)
            aeqd = Azimuthal Equidistant
            poly = Polyconic
            gnom = Gnomonic
            moll = Mollweide
            tmerc = Transverse Mercator
            nplaea = North-Polar Lambert Azimuthal
            mill = Miller Cylindrical
            merc = Mercator
            stere = Stereographic
            npstere = North-Polar Stereographic
            geos = Geostationary
            laea = Lambert Azimuthal Equal Area
            sinu = Sinusoidal
            spstere = South-Polar Stereographic
            lcc = Lambert Conformal
            npaeqd = North-Polar Azimuthal Equidistant
            eqdc = Equidistant Conic
            cyl = Cylindrical Equidistant
            omerc = Oblique Mercator
            aea = Albers Equal Area
            spaeqd = South-Polar Azimuthal Equidistant
            ortho = Orthographic
            cass= Cassini-Soldner
            splaea = South-Polar Lambert Azimuthal
            robin = Robinson
    
    DEFAULTS
        con: nam
        res:  c
        prj: mollweide 
        ELAT,ELON = 0,0
        NB: high resolution or lines can be very slow
    
    """
    dir_path='.'
    ocean=0
    res='c'
    proj='moll'
    euler_file=''
    Conts=[]
    Poles=[]
    PTS=[]
    lat_0,lon_0=0.,0.
    fmt='pdf'
    sym='r.'
    symsize=5
    plot=0
    SEQ,age,SAC=0,0,0
    rconts=['af','congo','kala','aus','eur','ind','sam','ant','grn','nam']
    if '-WD' in sys.argv:
        ind = sys.argv.index('-WD')
        dir_path=sys.argv[ind+1]
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt=sys.argv[ind+1]
    if '-con' in sys.argv:
        ind = sys.argv.index('-con')
        Conts=sys.argv[ind+1].split(':')
    if '-age' in sys.argv:
        ind = sys.argv.index('-age')
        age=int(sys.argv[ind+1])
        if age%5!=0 and age>320:
            print main.__doc__
            print 'age must be multiple of 5 less than 325'
            sys.exit()
        import pmagpy.frp as frp
    if '-res' in sys.argv:
        ind = sys.argv.index('-res')
        res=sys.argv[ind+1]
        if res!= 'c' and res!='l':
            print 'this resolution will take a while - be patient'
    if '-prj' in sys.argv:
        ind = sys.argv.index('-prj')
        proj=sys.argv[ind+1]
    if '-sav' in sys.argv: plot=1
    if '-eye' in sys.argv:
        ind = sys.argv.index('-eye')
        lat_0=float(sys.argv[ind+1])
        lon_0=float(sys.argv[ind+2])
    if '-pt' in sys.argv:
        ind = sys.argv.index('-pt')
        pt_lat=float(sys.argv[ind+1])
        pt_lon=float(sys.argv[ind+2])
        PTS.append([pt_lat,pt_lon])
    if '-sym' in sys.argv:
        ind = sys.argv.index('-sym')
        sym=sys.argv[ind+1]
        symsize=int(sys.argv[ind+2])
#    if '-rsym' in sys.argv:
#        ind = sys.argv.index('-rsym')
#        rsym=sys.argv[ind+1]
#        rsymsize=int(sys.argv[ind+2])
    if '-sr' in sys.argv: SEQ=1
    if '-sac' in sys.argv: SAC=1
    if '-pfr' in sys.argv:
        ind = sys.argv.index('-pfr')
        Poles.append([float(sys.argv[ind+1]),float(sys.argv[ind+2]),float(sys.argv[ind+3])])
    elif '-ffr' in sys.argv:
        ind = sys.argv.index('-ffr')
        file=dir_path+'/'+sys.argv[ind+1]
        f=open(file,'rU')
        edata=f.readlines()
        for line in edata:
            rec=line.split()
            Poles.append([float(rec[0]),float(rec[1]),float(rec[2])])
    elif '-fpp' in sys.argv:
        ind = sys.argv.index('-fpp')
        file=dir_path+'/'+sys.argv[ind+1]
        f=open(file,'rU')
        pdata=f.readlines()
        for line in pdata:
            rec=line.split()
# transform paleopole to Euler pole taking shortest route
            Poles.append([0.,float(rec[1])-90.,90.-float(rec[0])])
    if '-fpt' in sys.argv:
        ind = sys.argv.index('-fpt')
        file=dir_path+'/'+sys.argv[ind+1]
        f=open(file,'rU')
        ptdata=f.readlines()
        for line in ptdata:
            rec=line.split()
            PTS.append([float(rec[0]),float(rec[1])])
    FIG={'map':1}
    pmagplotlib.plot_init(FIG['map'],6,6)
    # read in er_sites file
    if res=='c':skip=8
    if res=='l':skip=5
    if res=='i':skip=2
    if res=='h':skip=1
    cnt=0
    Opts={'latmin':-90,'latmax':90,'lonmin':0.,'lonmax':360.,'lat_0':lat_0,'lon_0':lon_0,'proj':proj,'sym':sym,'symsize':3,'pltgrid':0,'res':res,'boundinglat':0.}
    if proj=='merc':
        Opts['latmin']=-70
        Opts['latmax']=70
        Opts['lonmin']=-180
        Opts['lonmax']=180
    pmagplotlib.plotMAP(FIG['map'],[],[],Opts) # plot the basemap
    Opts['pltgrid']=-1 # turn off replotting of gridlines
    if '-pt' in sys.argv:
        Opts['sym']=sym
        Opts['symsize']=symsize
        pmagplotlib.plotMAP(FIG['map'],[pt_lat],[pt_lon],Opts)
        if plot==0:pmagplotlib.drawFIGS(FIG)
    for cont in Conts: 
        Opts['sym']=sym
        lats,lons=[],[]
        if age!=0:
            Poles=[]
            rcont=cont
            if rcont not in rconts:
                print main.__doc__
                print rcont
                print 'continents  must be one of following: '
                print rconts
                sys.exit()
            if rcont=='congo':rcont='nwaf'
            if rcont=='kala':rcont='neaf'
            if rcont=='sam':rcont='sac'
            if rcont=='ant':rcont='eant'
            if rcont!='af':
                Poles.append(frp.get_pole(rcont,age))
            else:
                Poles.append([0,0,0])
            if SAC==1:Poles.append(frp.get_pole('saf',age))
            SEQ=1
            if Poles[-1]=='NONE':
                print 'continent does not exist for rotation, try again '
                sys.exit()
        data=continents.get_continent(cont+'.asc')
        for line in data:
            if float(line[0])==0 and float(line[1])==0:line[0]='100.' # change stupid 0,0s to delimeters with lat=100
            if float(line[0])>90:
                lats.append(float(line[0]))
                lons.append(float(line[1]))
            elif cnt%skip==0:
                lats.append(float(line[0]))
                lons.append(float(line[1]))
            cnt+=1
        if len(lats)>0 and len(Poles)==0:
            pmagplotlib.plotMAP(FIG['map'],lats,lons,Opts)
            if plot==0:pmagplotlib.drawFIGS(FIG)
        newlats,newlons=[],[]
        for lat in lats:newlats.append(lat)
        for lon in lons:newlons.append(lon)
        Opts['pltgrid']=-1 # turns off replotting of meridians and parallels
        for pole in Poles:
             Rlats,Rlons=pmag.PTrot(pole,newlats,newlons)
             Opts['sym']=sym
             Opts['symsize']=3
             if SEQ==0:
                 pmagplotlib.plotMAP(FIG['map'],Rlats,Rlons,Opts)
             elif pole==Poles[-1]: # plot only last pole for sequential rotations
                 pmagplotlib.plotMAP(FIG['map'],Rlats,Rlons,Opts)
             if plot==0:pmagplotlib.drawFIGS(FIG)
             if SEQ==1: # treat poles as sequential rotations
                 newlats,newlons=[],[]
                 for lat in Rlats:newlats.append(lat)
                 for lon in Rlons:newlons.append(lon)
    for pt in PTS:
        pt_lat=pt[0]
        pt_lon=pt[1]
        Opts['sym']='r*'
        Opts['symsize']=5
        pmagplotlib.plotMAP(FIG['map'],[pt[0]],[pt[1]],Opts)
        if plot==0:pmagplotlib.drawFIGS(FIG)
        Opts['pltgrid']=-1 # turns off replotting of meridians and parallels
        for pole in Poles:
            Opts['sym']=sym
            Opts['symsize']=symsize
            Rlats,Rlons=pmag.PTrot(pole,[pt_lat],[pt_lon])
            print Rlats,Rlons
            pmagplotlib.plotMAP(FIG['map'],Rlats,Rlons,Opts)
            if plot==0:pmagplotlib.drawFIGS(FIG)
        Opts['sym']='g^'
        Opts['symsize']=5
        pmagplotlib.plotMAP(FIG['map'],[pole[0]],[pole[1]],Opts)
        if plot==0:pmagplotlib.drawFIGS(FIG)
    files={}
    for key in FIG.keys():
        files[key]='Cont_rot'+'.'+fmt
    if plot==1:
        pmagplotlib.saveP(FIG,files)
        sys.exit()
    if pmagplotlib.isServer:
        black     = '#000000'
        purple    = '#800080'
        titles={}
        titles['eq']='Site Map'
        FIG = pmagplotlib.addBorders(FIG,titles,black,purple)
        pmagplotlib.saveP(FIG,files)
    else:
        pmagplotlib.drawFIGS(FIG)
        ans=raw_input(" S[a]ve to save plot, Return to quit:  ")
        if ans=="a":
            pmagplotlib.saveP(FIG,files)
Esempio n. 16
0
def main():
    """
    NAME
        zeq_magic.py

    DESCRIPTION
        reads in magic_measurements formatted file, makes plots of remanence decay
        during demagnetization experiments.  Reads in prior interpretations saved in 
        a pmag_specimens formatted file and  allows re-interpretations of best-fit lines
        and planes and saves (revised or new) interpretations in a pmag_specimens file.  
        interpretations are saved in the coordinate system used. Also allows judicious editting of
        measurements to eliminate "bad" measurements.  These are marked as such in the magic_measurements
        input file.  they are NOT deleted, just ignored. 

    SYNTAX
        zeq_magic.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f  MEASFILE: sets magic_measurements format input file, default: magic_measurements.txt
        -fsp SPECFILE: sets pmag_specimens format file with prior interpreations, default: zeq_specimens.txt
        -Fp PLTFILE: sets filename for saved plot, default is name_type.fmt (where type is zijd, eqarea or decay curve)
        -crd [s,g,t]: sets coordinate system,  g=geographic, t=tilt adjusted, default: specimen coordinate system
        -fsa SAMPFILE: sets er_samples format file with orientation information, default: er_samples.txt
        -spc SPEC  plots single specimen SPEC, saves plot with specified format 
              with optional -dir settings and quits
        -dir [L,P,F][beg][end]: sets calculation type for principal component analysis, default is none
             beg: starting step for PCA calculation
             end: ending step for PCA calculation
             [L,P,F]: calculation type for line, plane or fisher mean
             must be used with -spc option
        -fmt FMT: set format of saved plot [png,svg,jpg]
        -A:  suppresses averaging of  replicate measurements, default is to average
        -sav: saves all plots without review
    SCREEN OUTPUT:
        Specimen, N, a95, StepMin, StepMax, Dec, Inc, calculation type

    """
    # initialize some variables
    doave,e,b=1,0,0 # average replicates, initial end and beginning step
    plots,coord=0,'s'
    noorient=0
    version_num=pmag.get_version()
    verbose=pmagplotlib.verbose
    beg_pca,end_pca,direction_type="","",'l'
    calculation_type,fmt="","svg"
    user,spec_keys,locname="",[],''
    plot_file=""
    sfile=""
    plot_file=""
    PriorRecs=[] # empty list for prior interpretations
    backup=0
    specimen="" # can skip everything and just plot one specimen with bounds e,b
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-WD' in sys.argv:
        ind=sys.argv.index('-WD')
        dir_path=sys.argv[ind+1]
    else:
        dir_path='.'
    inspec=dir_path+'/'+'zeq_specimens.txt'
    meas_file,geo,tilt,ask,samp_file=dir_path+'/magic_measurements.txt',0,0,0,dir_path+'/er_samples.txt'
    if '-f' in sys.argv:
        ind=sys.argv.index('-f')
        meas_file=dir_path+'/'+sys.argv[ind+1]
    if '-fsp' in sys.argv:
        ind=sys.argv.index('-fsp')
        inspec=dir_path+'/'+sys.argv[ind+1]
    if '-fsa' in sys.argv:
        ind=sys.argv.index('-fsa')
        samp_file=dir_path+'/'+sys.argv[ind+1]
        sfile='ok'
    if '-crd' in sys.argv:
        ind=sys.argv.index('-crd')
        coord=sys.argv[ind+1]
        if coord=='g' or coord=='t':
            samp_data,file_type=pmag.magic_read(samp_file)
            if file_type=='er_samples':sfile='ok'
            geo=1
            if coord=='t':tilt=1
    if '-spc' in sys.argv:
        ind=sys.argv.index('-spc')
        specimen=sys.argv[ind+1]
        if '-dir' in sys.argv:
            ind=sys.argv.index('-dir')
            direction_type=sys.argv[ind+1]
            beg_pca=int(sys.argv[ind+2])
            end_pca=int(sys.argv[ind+3])
            if direction_type=='L':calculation_type='DE-BFL'
            if direction_type=='P':calculation_type='DE-BFP'
            if direction_type=='F':calculation_type='DE-FM'
        if '-Fp' in sys.argv: 
            ind=sys.argv.index('-Fp')
            plot_file=dir_path+'/'+sys.argv[ind+1]
    if '-A' in sys.argv: doave=0
    if '-sav' in sys.argv: 
        plots=1
        verbose=0
    if '-fmt' in sys.argv:
        ind=sys.argv.index('-fmt')
        fmt=sys.argv[ind+1]
    #
    first_save=1
    meas_data,file_type=pmag.magic_read(meas_file)
    changeM,changeS=0,0 # check if data or interpretations have changed
    if file_type != 'magic_measurements':
        print file_type
        print file_type,"This is not a valid magic_measurements file " 
        sys.exit()
    for rec in  meas_data:
        if  "magic_method_codes" not in rec.keys(): rec["magic_method_codes"]=""
        methods=""
        tmp=rec["magic_method_codes"].replace(" ","").split(":")
        for meth in tmp:
            methods=methods+meth+":"
        rec["magic_method_codes"]=methods[:-1]  # get rid of annoying spaces in Anthony's export files 
        if "magic_instrument_codes" not in rec.keys() :rec["magic_instrument_codes"]=""
    PriorSpecs=[]
    PriorRecs,file_type=pmag.magic_read(inspec)
    if len(PriorRecs)==0: 
        if verbose:print "starting new file ",inspec
    for Rec in PriorRecs:
        if 'magic_software_packages' not in Rec.keys():Rec['magic_software_packages']=""
        if Rec['er_specimen_name'] not in PriorSpecs:
            if 'specimen_comp_name' not in Rec.keys():Rec['specimen_comp_name']="A"
            PriorSpecs.append(Rec['er_specimen_name'])
        else:
            if 'specimen_comp_name' not in Rec.keys():Rec['specimen_comp_name']="A"
        if "magic_method_codes" in Rec.keys():
            methods=[]
            tmp=Rec["magic_method_codes"].replace(" ","").split(":")
            for meth in tmp:
                methods.append(meth)
            if 'DE-FM' in methods:
                Rec['calculation_type']='DE-FM' # this won't be imported but helps
            if 'DE-BFL' in methods:
                Rec['calculation_type']='DE-BFL'
            if 'DE-BFL-A' in methods:
                Rec['calculation_type']='DE-BFL-A'
            if 'DE-BFL-O' in methods:
                Rec['calculation_type']='DE-BFL-O'
            if 'DE-BFP' in methods:
                Rec['calculation_type']='DE-BFP'
        else:
            Rec['calculation_type']='DE-BFL' # default is to assume a best-fit line
    #
    # get list of unique specimen names
    #
    sids=pmag.get_specs(meas_data)
    #
    #  set up plots, angle sets X axis to horizontal,  direction_type 'l' is best-fit line
    # direction_type='p' is great circle
    #     
    #
    # draw plots for sample s - default is just to step through zijderveld diagrams
    #
    #
    # define figure numbers for equal area, zijderveld,  
    #  and intensity vs. demagnetiztion step respectively
    ZED={}
    ZED['eqarea'],ZED['zijd'],  ZED['demag']=1,2,3 
    pmagplotlib.plot_init(ZED['eqarea'],5,5)
    pmagplotlib.plot_init(ZED['zijd'],6,5)
    pmagplotlib.plot_init(ZED['demag'],5,5)
    save_pca=0
    if specimen=="":
        k = 0
    else:
        k=sids.index(specimen)
    angle,direction_type="",""
    setangle=0
    CurrRecs=[]
    while k < len(sids):
        CurrRecs=[]
        if setangle==0:angle=""
        method_codes,inst_code=[],""
        s=sids[k]
        PmagSpecRec={}
        PmagSpecRec["er_analyst_mail_names"]=user
        PmagSpecRec['magic_software_packages']=version_num
        PmagSpecRec['specimen_description']=""
        PmagSpecRec['magic_method_codes']=""
        if verbose and  s!="":print s, k , 'out of ',len(sids)
    #
    #  collect info for the PmagSpecRec dictionary
    #
        s_meas=pmag.get_dictitem(meas_data,'er_specimen_name',s,'T') # fish out this specimen
        s_meas=pmag.get_dictitem(s_meas,'magic_method_codes','Z','has') # fish out zero field steps
        if len(s_meas)>0:
          for rec in  s_meas: # fix up a few things for the output record
               PmagSpecRec["magic_instrument_codes"]=rec["magic_instrument_codes"]  # copy over instruments
               PmagSpecRec["er_citation_names"]="This study"
               PmagSpecRec["er_specimen_name"]=s
               PmagSpecRec["er_sample_name"]=rec["er_sample_name"]
               PmagSpecRec["er_site_name"]=rec["er_site_name"]
               PmagSpecRec["er_location_name"]=rec["er_location_name"]
               locname=rec['er_location_name']
               if 'er_expedition_name' in rec.keys(): PmagSpecRec["er_expedition_name"]=rec["er_expedition_name"]
               PmagSpecRec["magic_method_codes"]=rec["magic_method_codes"]
               if "magic_experiment_name" not in rec.keys():
                   PmagSpecRec["magic_experiment_names"]=""
               else:    
                   PmagSpecRec["magic_experiment_names"]=rec["magic_experiment_name"]
               break
    #
    # find the data from the meas_data file for this specimen
    #
          data,units=pmag.find_dmag_rec(s,meas_data)
          PmagSpecRec["measurement_step_unit"]= units
          u=units.split(":")
          if "T" in units:PmagSpecRec["magic_method_codes"]=PmagSpecRec["magic_method_codes"]+":LP-DIR-AF"
          if "K" in units:PmagSpecRec["magic_method_codes"]=PmagSpecRec["magic_method_codes"]+":LP-DIR-T"
          if "J" in units:PmagSpecRec["magic_method_codes"]=PmagSpecRec["magic_method_codes"]+":LP-DIR-M"
    #
    # find prior interpretation
    #
          if len(CurrRecs)==0: # check if already in
            beg_pca,end_pca="",""
            calculation_type=""
            if inspec !="":
              if verbose: print "    looking up previous interpretations..."
              precs=pmag.get_dictitem(PriorRecs,'er_specimen_name',s,'T') # get all the prior recs with this specimen name
              precs=pmag.get_dictitem(precs,'magic_method_codes','LP-DIR','has') # get the directional data
              PriorRecs=pmag.get_dictitem(PriorRecs,'er_specimen_name',s,'F') # take them all out of prior recs
         # get the ones that meet the current coordinate system
              for prec in precs:
                if 'specimen_tilt_correction' not in prec.keys() or prec['specimen_tilt_correction']=='-1':
                    crd='s'
                elif prec['specimen_tilt_correction']=='0':
                    crd='g'
                elif prec['specimen_tilt_correction']=='100':
                    crd='t'
                else:
                    crd='?'
                CurrRec={}
                for key in prec.keys():CurrRec[key]=prec[key]
                CurrRecs.append(CurrRec) # put in CurrRecs
                method_codes= CurrRec["magic_method_codes"].replace(" ","").split(':')
                calculation_type='DE-BFL'
                if 'DE-FM' in method_codes: calculation_type='DE-FM'
                if 'DE-BFP' in method_codes: calculation_type='DE-BFP'
                if 'DE-BFL-A' in method_codes: calculation_type='DE-BFL-A'
                if 'specimen_dang' not in CurrRec.keys():
                    if verbose:print 'Run mk_redo.py and zeq_magic_redo.py to get the specimen_dang values'
                    CurrRec['specimen_dang']=-1
                if calculation_type!='DE-FM' and crd==coord: # not a fisher mean
                    if verbose:print "Specimen  N    MAD    DANG  start     end      dec     inc  type  component coordinates"
                    if units=='K':
                            if verbose:print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f  %s  %s       %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_mad"]),float(CurrRec["specimen_dang"]),float(CurrRec["measurement_step_min"])-273,float(CurrRec["measurement_step_max"])-273,float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,CurrRec['specimen_comp_name'],crd)
                    elif units=='T':
                       if verbose:print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f  %s  %s %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_mad"]),float(CurrRec["specimen_dang"]),float(CurrRec["measurement_step_min"])*1e3,float(CurrRec["measurement_step_max"])*1e3,float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,CurrRec['specimen_comp_name'],crd)
                    elif 'T' in units and 'K' in units:
                            if float(CurrRec['measurement_step_min'])<1.0 :
                                min=float(CurrRec['measurement_step_min'])*1e3
                            else:
                                min=float(CurrRec['measurement_step_min'])-273
                            if float(CurrRec['measurement_step_max'])<1.0 :
                                max=float(CurrRec['measurement_step_max'])*1e3
                            else:
                                max=float(CurrRec['measurement_step_max'])-273
                            if verbose:print '%s %i %7.1f %i %i %7.1f %7.1f %7.1f, %s        %s\n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_mad"]),float(CurrRec['specimen_dang']),min,max,float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,crd)
                    elif 'J' in units:
                       if verbose:print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f  %s  %s       %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_mad"]),float(CurrRec['specimen_dang']),float(CurrRec["measurement_step_min"]),float(CurrRec["measurement_step_max"]),float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,CurrRec['specimen_comp_name'],crd)
                elif calculation_type=='DE-FM' and crd==coord: # fisher mean
                    if verbose:print "Specimen  a95 DANG   start     end      dec     inc  type  component coordinates"
                    if units=='K':
                         if verbose:print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f  %s  %s       %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_alpha95"]),float(CurrRec["measurement_step_min"])-273,float(CurrRec["measurement_step_max"])-273,float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,CurrRec['specimen_comp_name'],crd)
                    elif units=='T':
                          if verbose:print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f  %s  %s       %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_alpha95"]),float(CurrRec["measurement_step_min"])*1e3,float(CurrRec["measurement_step_max"])*1e3,float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,CurrRec['specimen_comp_name'],crd)
                    elif 'T' in units and 'K' in units:
                            if float(CurrRec['measurement_step_min'])<1.0 :
                                min=float(CurrRec['measurement_step_min'])*1e3
                            else:
                                min=float(CurrRec['measurement_step_min'])-273
                            if float(CurrRec['measurement_step_max'])<1.0 :
                                max=float(CurrRec['measurement_step_max'])*1e3
                            else:
                                max=float(CurrRec['measurement_step_max'])-273
                            if verbose:print '%s %i %7.1f %i %i %7.1f %7.1f %s       %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_alpha95"]),min,max,float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,crd)
                    elif 'J' in units:
                       if verbose:print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %s %s       %s \n' % (CurrRec["er_specimen_name"],int(CurrRec["specimen_n"]),float(CurrRec["specimen_mad"]),float(CurrRec["measurement_step_min"]),float(CurrRec["measurement_step_max"]),float(CurrRec["specimen_dec"]),float(CurrRec["specimen_inc"]),calculation_type,CurrRec['specimen_comp_name'],crd)
              if len(CurrRecs)==0:beg_pca,end_pca="",""
          datablock=data
          noskip=1
          if len(datablock) <3: 
            noskip=0
            if backup==0:
                k+=1
            else:
                k-=1
            if len(CurrRecs)>0:
                for rec in CurrRecs:
                    PriorRecs.append(rec)
            CurrRecs=[]
          else:
            backup=0 
          if noskip:
        #
        # find replicate measurements at given treatment step and average them
        #
#            step_meth,avedata=pmag.vspec(data)
#            if len(avedata) != len(datablock):
#                if doave==1: 
#                    method_codes.append("DE-VM")
#                    datablock=avedata
#        #
        # do geo or stratigraphic correction now
        #
            if geo==1:
        #
        # find top priority orientation method
                orient,az_type=pmag.get_orient(samp_data,PmagSpecRec["er_sample_name"])
                if az_type=='SO-NO':
                    if verbose: print "no orientation data for ",s 
                    orient["sample_azimuth"]=0
                    orient["sample_dip"]=0
                    noorient=1
                    method_codes.append("SO-NO")
                    orient["sample_azimuth"]=0
                    orient["sample_dip"]=0
                    orient["sample_bed_dip_azimuth"]=0
                    orient["sample_bed_dip"]=0
                    noorient=1
                    method_codes.append("SO-NO")
                else: 
                    noorient=0
        #
        #  if stratigraphic selected,  get stratigraphic correction
        #
                tiltblock,geoblock=[],[]
                for rec in datablock:
                    d_geo,i_geo=pmag.dogeo(rec[1],rec[2],float(orient["sample_azimuth"]),float(orient["sample_dip"]))
                    geoblock.append([rec[0],d_geo,i_geo,rec[3],rec[4],rec[5],rec[6]])
                    if tilt==1 and "sample_bed_dip" in orient.keys() and float(orient['sample_bed_dip'])!=0: 
                        d_tilt,i_tilt=pmag.dotilt(d_geo,i_geo,float(orient["sample_bed_dip_direction"]),float(orient["sample_bed_dip"]))
                        tiltblock.append([rec[0],d_tilt,i_tilt,rec[3],rec[4],rec[5],rec[6]])
                    if tilt==1: plotblock=tiltblock
                    if geo==1 and tilt==0:plotblock=geoblock
            if geo==0 and tilt==0: plotblock=datablock
    #
    # set the end pca point to last point  if not set
            if e==0 or e>len(plotblock)-1: e=len(plotblock)-1
            if angle=="": angle=plotblock[0][1] # rotate to NRM declination
            title=s+'_s'
            if geo==1 and tilt==0 and noorient!=1:title=s+'_g'
            if tilt==1 and noorient!=1:title=s+'_t'
            pmagplotlib.plotZED(ZED,plotblock,angle,title,units)
            if verbose:pmagplotlib.drawFIGS(ZED)
            if len(CurrRecs)!=0:
                for prec in CurrRecs:
                    if 'calculation_type' not in prec.keys():
                        calculation_type=''
                    else:
                        calculation_type=prec["calculation_type"]
                    direction_type=prec["specimen_direction_type"]
                    if calculation_type !="":
                        beg_pca,end_pca="",""
                        for j in range(len(datablock)):
                            if data[j][0]==float(prec["measurement_step_min"]):beg_pca=j
                            if data[j][0]==float(prec["measurement_step_max"]):end_pca=j
                        if beg_pca=="" or end_pca=="":  
                            if verbose:
                                print "something wrong with prior interpretation "
                            break
                    if calculation_type!="":
                        if beg_pca=="":beg_pca=0
                        if end_pca=="":end_pca=len(plotblock)-1
                        if geo==1 and tilt==0:
                            mpars=pmag.domean(geoblock,beg_pca,end_pca,calculation_type)
                            if mpars["specimen_direction_type"]!="Error":
                                pmagplotlib.plotDir(ZED,mpars,geoblock,angle)
                                if verbose:pmagplotlib.drawFIGS(ZED)
                        if geo==1 and tilt==1:
                            mpars=pmag.domean(tiltblock,beg_pca,end_pca,calculation_type)
                            if mpars["specimen_direction_type"]!="Error":
                                pmagplotlib.plotDir(ZED,mpars,tiltblock,angle)
                                if verbose:pmagplotlib.drawFIGS(ZED)
                        if geo==0 and tilt==0: 
                            mpars=pmag.domean(datablock,beg_pca,end_pca,calculation_type)
                        if mpars["specimen_direction_type"]!="Error":
                                pmagplotlib.plotDir(ZED,mpars,plotblock,angle)
                                if verbose:pmagplotlib.drawFIGS(ZED)
    #
    # print out data for this sample to screen
    #
            recnum=0
            for plotrec in plotblock:
                if units=='T' and verbose: print '%s: %i  %7.1f %s  %8.3e %7.1f %7.1f %s' % (plotrec[5], recnum,plotrec[0]*1e3," mT",plotrec[3],plotrec[1],plotrec[2],plotrec[6])
                if units=="K" and verbose: print '%s: %i  %7.1f %s  %8.3e %7.1f %7.1f %s' % (plotrec[5], recnum,plotrec[0]-273,' C',plotrec[3],plotrec[1],plotrec[2],plotrec[6])
                if units=="J" and verbose: print '%s: %i  %7.1f %s  %8.3e %7.1f %7.1f %s' % (plotrec[5], recnum,plotrec[0],' J',plotrec[3],plotrec[1],plotrec[2],plotrec[6])
                if 'K' in units and 'T' in units:
                    if plotrec[0]>=1. and verbose: print '%s: %i  %7.1f %s  %8.3e %7.1f %7.1f %s' % (plotrec[5], recnum,plotrec[0]-273,' C',plotrec[3],plotrec[1],plotrec[2],plotrec[6])
                    if plotrec[0]<1. and  verbose: print '%s: %i  %7.1f %s  %8.3e %7.1f %7.1f %s' % (plotrec[5], recnum,plotrec[0]*1e3," mT",plotrec[3],plotrec[1],plotrec[2],plotrec[6])
                recnum += 1
            if specimen!="":
                if plot_file=="":
                    basename=locname+'_'+s
                else:
                    basename=plot_file
                files={}
                for key in ZED.keys():
                    files[key]=basename+'_'+key+'.'+fmt 
                pmagplotlib.saveP(ZED,files)
                sys.exit()
            else:  # interactive
              if plots==0:
                ans='b'
                k+=1
                changeS=0
                while ans != "":
                    if len(CurrRecs)==0:
                        print """
                g/b: indicates  good/bad measurement.  "bad" measurements excluded from calculation

                set s[a]ve plot, [b]ounds for pca and calculate, [p]revious, [s]pecimen, 
                 change [h]orizontal projection angle,   change [c]oordinate systems, 
                 [e]dit data,  [q]uit: 
                """
                    else:
                        print """
                g/b: indicates  good/bad measurement.  "bad" measurements excluded from calculation

                 set s[a]ve plot, [b]ounds for pca and calculate, [p]revious, [s]pecimen, 
                 change [h]orizontal projection angle,   change [c]oordinate systems, 
                 [d]elete current interpretation(s), [e]dit data,   [q]uit: 
                """
                    ans=raw_input('<Return>  for  next specimen \n')
                    setangle=0
                    if ans=='d': # delete this interpretation
                        CurrRecs=[]
                        k-=1 # replot same specimen
                        ans=""
                        changeS=1
                    if  ans=='q': 
                        if changeM==1:
                            ans=raw_input('Save changes to magic_measurements.txt? y/[n] ')
                            if ans=='y':
                                pmag.magic_write(meas_file,meas_data,'magic_measurements')
                        print "Good bye"
                        sys.exit()
                    if  ans=='a':
                        if plot_file=="":
                            basename=locname+'_'+s+'_'
                        else:
                            basename=plot_file
                        files={}
                        for key in ZED.keys():
                            files[key]=basename+'_'+coord+'_'+key+'.'+fmt 
                        pmagplotlib.saveP(ZED,files)
                        ans=""
                    if  ans=='p':
                        k-=2
                        ans=""
                        backup=1
                    if ans=='c':
                        k-=1 # replot same block
                        if tilt==0 and geo ==1:print "You  are currently viewing geographic  coordinates "
                        if tilt==1 and geo ==1:print "You  are currently viewing stratigraphic  coordinates "
                        if tilt==0 and geo ==0: print "You  are currently viewing sample coordinates "
                        print "\n Which coordinate system do you wish to view? "
                        coord=raw_input(" <Return>  specimen, [g] geographic, [t] tilt corrected ")
                        if coord=="g":geo,tilt=1,0
                        if coord=="t":
                            geo=1
                            tilt=1
                        if coord=="":
                            coord='s'
                            geo=0
                            tilt=0
                        if geo==1 and sfile=="":
                            samp_file=raw_input(" Input er_samples file for sample orientations [er_samples.txt] " )
                            if samp_file=="":samp_file="er_samples.txt"
                            samp_data,file_type=pmag.magic_read(samp_file)
                            if file_type != 'er_samples':
                               print file_type
                               print "This is not a valid er_samples file - coordinate system not changed" 
                            else:
                               sfile="ok"
                        ans=""
                    if ans=='s':
                        keepon=1
                        sample=raw_input('Enter desired specimen name (or first part there of): ')
                        while keepon==1:
                            try:
                                k =sids.index(sample)
                                keepon=0
                            except:
                                tmplist=[]
                                for qq in range(len(sids)):
                                    if sample in sids[qq]:tmplist.append(sids[qq])
                                print sample," not found, but this was: "
                                print tmplist
                                sample=raw_input('Select one or try again\n ')
                        angle,direction_type="",""
                        setangle=0
                        ans=""
                    if ans=='h':
                        k-=1
                        angle=raw_input("Enter desired  declination for X axis 0-360 ")
                        angle=float(angle)
                        if angle==0:angle=0.001
                        s=sids[k]
                        setangle=1
                        ans=""
                    if  ans=='e':
                        k-=1
                        ans=""
                        recnum=0
                        for plotrec in plotblock:
                            if plotrec[0]<=200 and verbose: print '%s: %i  %7.1f %s  %8.3e %7.1f %7.1f ' % (plotrec[5], recnum,plotrec[0]*1e3," mT",plotrec[3],plotrec[1],plotrec[2])
                            if plotrec[0]>200 and verbose: print '%s: %i  %7.1f %s  %8.3e %7.1f %7.1f ' % (plotrec[5], recnum,plotrec[0]-273,' C',plotrec[3],plotrec[1],plotrec[2])
                            recnum += 1
                        answer=raw_input('Enter index of point to change from bad to good or vice versa:  ')
                        try: 
                                ind=int(answer)
                                meas_data=pmag.mark_dmag_rec(s,ind,meas_data)
                                changeM=1
                        except:
                                'bad entry, try again'
                    if  ans=='b':
                        if end_pca=="":end_pca=len(plotblock)-1
                        if beg_pca=="":beg_pca=0
                        k-=1   # stay on same sample until through
                        GoOn=0
                        while GoOn==0:
                            print 'Enter index of first point for pca: ','[',beg_pca,']'
                            answer=raw_input('return to keep default  ')
                            if answer != "":
                                beg_pca=int(answer)
                            print 'Enter index  of last point for pca: ','[',end_pca,']'
                            answer=raw_input('return to keep default  ')
                            try:
                                end_pca=int(answer) 
                                if plotblock[beg_pca][5]=='b' or plotblock[end_pca][5]=='b': 
                                    print "Can't select 'bad' measurement for PCA bounds -try again"
                                    end_pca=len(plotblock)-1
                                    beg_pca=0
                                elif beg_pca >=0 and beg_pca<=len(plotblock)-2 and end_pca>0 and end_pca<len(plotblock): 
                                    GoOn=1
                                else:
                                    print beg_pca,end_pca, " are bad entry of indices - try again"
                                    end_pca=len(plotblock)-1
                                    beg_pca=0
                            except:
                                print beg_pca,end_pca, " are bad entry of indices - try again"
                                end_pca=len(plotblock)-1
                                beg_pca=0
                        GoOn=0
                        while GoOn==0:
                            if calculation_type!="":
                                print "Prior calculation type = ",calculation_type
                            ct=raw_input('Enter new Calculation Type: best-fit line,  plane or fisher mean [l]/p/f :  ' )
                            if ct=="" or ct=="l": 
                                direction_type="l"
                                calculation_type="DE-BFL"
                                GoOn=1
                            elif ct=='p':
                                direction_type="p"
                                calculation_type="DE-BFP"
                                GoOn=1
                            elif ct=='f':
                                direction_type="l"
                                calculation_type="DE-FM"
                                GoOn=1
                            else: 
                                print "bad entry of calculation type: try again. "
                        pmagplotlib.plotZED(ZED,plotblock,angle,s,units)
                        if verbose:pmagplotlib.drawFIGS(ZED)
                        if geo==1 and tilt==0:
                            mpars=pmag.domean(geoblock,beg_pca,end_pca,calculation_type)
                            if mpars['specimen_direction_type']=='Error':break
                            PmagSpecRec["specimen_dec"]='%7.1f ' %(mpars["specimen_dec"])
                            PmagSpecRec["specimen_inc"]='%7.1f ' %(mpars["specimen_inc"])
                            if "SO-NO" not in method_codes:
                                PmagSpecRec["specimen_tilt_correction"]='0'
                                method_codes.append("DA-DIR-GEO")
                            else:
                                PmagSpecRec["specimen_tilt_correction"]='-1'
                            pmagplotlib.plotDir(ZED,mpars,geoblock,angle)
                            if verbose:pmagplotlib.drawFIGS(ZED)
                        if geo==1 and  tilt==1:
                            mpars=pmag.domean(tiltblock,beg_pca,end_pca,calculation_type)
                            if mpars['specimen_direction_type']=='Error':break
                            PmagSpecRec["specimen_dec"]='%7.1f ' %(mpars["specimen_dec"])
                            PmagSpecRec["specimen_inc"]='%7.1f ' %(mpars["specimen_inc"])
                            if "SO-NO" not in method_codes:
                                PmagSpecRec["specimen_tilt_correction"]='100'
                                method_codes.append("DA-DIR-TILT")
                            else:
                                PmagSpecRec["specimen_tilt_correction"]='-1'
                            pmagplotlib.plotDir(ZED,mpars,tiltblock,angle)
                            if verbose:pmagplotlib.drawFIGS(ZED)
                        if geo==0 and tilt==0: 
                            mpars=pmag.domean(datablock,beg_pca,end_pca,calculation_type)
                            if mpars['specimen_direction_type']=='Error':break
                            PmagSpecRec["specimen_dec"]='%7.1f ' %(mpars["specimen_dec"])
                            PmagSpecRec["specimen_inc"]='%7.1f ' %(mpars["specimen_inc"])
                            PmagSpecRec["specimen_tilt_correction"]='-1'
                            pmagplotlib.plotDir(ZED,mpars,plotblock,angle)
                            if verbose:pmagplotlib.drawFIGS(ZED)
                        PmagSpecRec["measurement_step_min"]='%8.3e ' %(mpars["measurement_step_min"])
                        PmagSpecRec["measurement_step_max"]='%8.3e ' %(mpars["measurement_step_max"])
                        PmagSpecRec["specimen_correction"]='u'
                        PmagSpecRec["specimen_dang"]='%7.1f ' %(mpars['specimen_dang'])
                        print 'DANG: ',PmagSpecRec["specimen_dang"]
                        if calculation_type!='DE-FM':
                            PmagSpecRec["specimen_mad"]='%7.1f ' %(mpars["specimen_mad"])
                            PmagSpecRec["specimen_alpha95"]=""
                        else:
                            PmagSpecRec["specimen_alpha95"]='%7.1f ' %(mpars["specimen_alpha95"])
                            PmagSpecRec["specimen_mad"]=""
                        PmagSpecRec["specimen_n"]='%i ' %(mpars["specimen_n"])
                        PmagSpecRec["specimen_direction_type"]=direction_type
                        PmagSpecRec["calculation_type"]=calculation_type # redundant and won't be imported - just for convenience
                        method_codes=PmagSpecRec["magic_method_codes"].split(':')
                        if len(method_codes) != 0:
                            methstring=""
                            for meth in method_codes:
                                ctype=meth.split('-')
                                if 'DE' not in ctype:methstring=methstring+ ":" +meth # don't include old direction estimation methods
                        methstring=methstring+':'+calculation_type
                        PmagSpecRec["magic_method_codes"]= methstring.strip(':')
                        print 'Method codes: ',PmagSpecRec['magic_method_codes']
                        if calculation_type!='DE-FM':
                            if units=='K': 
                                print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_mad"]),float(PmagSpecRec["specimen_dang"]),float(PmagSpecRec["measurement_step_min"])-273,float(PmagSpecRec["measurement_step_max"])-273,float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
                            elif units== 'T':
                                print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_mad"]),float(PmagSpecRec["specimen_dang"]),float(PmagSpecRec["measurement_step_min"])*1e3,float(PmagSpecRec["measurement_step_max"])*1e3,float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
                            elif 'T' in units and 'K' in units:
                                if float(PmagSpecRec['measurement_step_min'])<1.0 :
                                    min=float(PmagSpecRec['measurement_step_min'])*1e3
                                else:
                                    min=float(PmagSpecRec['measurement_step_min'])-273
                                if float(PmagSpecRec['measurement_step_max'])<1.0 :
                                    max=float(PmagSpecRec['measurement_step_max'])*1e3
                                else:
                                    max=float(PmagSpecRec['measurement_step_max'])-273
                                print '%s %i %7.1f %i %i %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_mad"]),float(PmagSpecRec["specimen_dang"]),min,max,float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
                            else:
                                print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_mad"]),float(PmagSpecRec["specimen_dang"]),float(PmagSpecRec["measurement_step_min"]),float(PmagSpecRec["measurement_step_max"]),float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
                        else:
                            if 'K' in units:
                                print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_alpha95"]),float(PmagSpecRec["specimen_dang"]),float(PmagSpecRec["measurement_step_min"])-273,float(PmagSpecRec["measurement_step_max"])-273,float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
                            elif 'T' in units:
                                print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_alpha95"]),float(PmagSpecRec["specimen_dang"]),float(PmagSpecRec["measurement_step_min"])*1e3,float(PmagSpecRec["measurement_step_max"])*1e3,float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
                            elif 'T' in units and 'K' in units:
                                if float(PmagSpecRec['measurement_step_min'])<1.0 :
                                    min=float(PmagSpecRec['measurement_step_min'])*1e3
                                else:
                                    min=float(PmagSpecRec['measurement_step_min'])-273
                                if float(PmagSpecRec['measurement_step_max'])<1.0 :
                                    max=float(PmagSpecRec['measurement_step_max'])*1e3
                                else:
                                    max=float(PmagSpecRec['measurement_step_max'])-273
                                print '%s %i %7.1f %i %i %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_alpha95"]),min,max,float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
                            else:
                                print '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f, %s \n' % (PmagSpecRec["er_specimen_name"],int(PmagSpecRec["specimen_n"]),float(PmagSpecRec["specimen_alpha95"]),float(PmagSpecRec["measurement_step_min"]),float(PmagSpecRec["measurement_step_max"]),float(PmagSpecRec["specimen_dec"]),float(PmagSpecRec["specimen_inc"]),calculation_type)
                        saveit=raw_input("Save this interpretation? [y]/n \n")
                        if saveit!="n":
                            changeS=1
#
# put in details
#
                            angle,direction_type,setangle="","",0
                            if len(CurrRecs)>0:
                                replace=raw_input(" [0] add new component, or [1] replace existing interpretation(s) [default is replace] ")
                                if replace=="1" or replace=="":
                                    CurrRecs=[]
                                    PmagSpecRec['specimen_comp_name']='A'
                                    CurrRecs.append(PmagSpecRec)
                                else:
                                    print 'These are the current component names for this specimen: '
                                    for trec in CurrRecs:print trec['specimen_comp_name']
                                    compnum=raw_input("Enter new component name: ")
                                    PmagSpecRec['specimen_comp_name']=compnum
                                    print "Adding new component: ",PmagSpecRec['specimen_comp_name']
                                    CurrRecs.append(PmagSpecRec)
                            else:
                                PmagSpecRec['specimen_comp_name']='A'
                                CurrRecs.append(PmagSpecRec)
                            k+=1 
                            ans=""
                        else:
                            ans=""
              else:  # plots=1
                  k+=1
                  files={}
                  locname.replace('/','-')
                  print PmagSpecRec
                  for key in ZED.keys():
                      files[key]="LO:_"+locname+'_SI:_'+PmagSpecRec['er_site_name']+'_SA:_'+PmagSpecRec['er_sample_name']+'_SP:_'+s+'_CO:_'+coord+'_TY:_'+key+'_.'+fmt
                  if pmagplotlib.isServer:
                      black     = '#000000'
                      purple    = '#800080'
                      titles={}
                      titles['demag']='DeMag Plot'
                      titles['zijd']='Zijderveld Plot'
                      titles['eqarea']='Equal Area Plot'
                      ZED = pmagplotlib.addBorders(ZED,titles,black,purple)
                  pmagplotlib.saveP(ZED,files)
            if len(CurrRecs)>0:
                for rec in CurrRecs: PriorRecs.append(rec)
            if changeS==1:
                if len(PriorRecs)>0:
                    save_redo(PriorRecs,inspec)
                else:
                    os.system('rm '+inspec)
            CurrRecs,beg_pca,end_pca=[],"","" # next up
            changeS=0
        else: k+=1 # skip record - not enough data
    if changeM==1:
        pmag.magic_write(meas_file,meas_data,'magic_measurements')
Esempio n. 17
0
def main():
    """
    NAME
        thellier_magic.py

    DESCRIPTION
        plots Thellier-Thellier data in version 3.0 format
        Reads saved interpretations from a specimen formatted table, default: specimens.txt

    SYNTAX
        thellier_magic.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f MEAS, set measurements input file, default is 'measurements.txt'
        -fsp PRIOR, set specimens.txt prior interpretations file, default is 'specimens.txt'
        -fcr CRIT, set criteria file for grading.  # not yet implemented
        -fmt [svg,png,jpg], format for images - default is svg
        -sav,  saves plots with out review (in format specified by -fmt key or default)
        -spc SPEC, plots single specimen SPEC, saves plot with specified format
            with optional -b bounds and quits
        -b BEG END: sets  bounds for calculation
           BEG: starting step number for slope calculation
           END: ending step number for slope calculation
        -z use only z component difference for pTRM calculation

    OUTPUT
        figures:
            ALL:  numbers refer to temperature steps in command line window
            1) Arai plot:  closed circles are zero-field first/infield
                           open circles are infield first/zero-field
                           triangles are pTRM checks
                           squares are pTRM tail checks
                           VDS is vector difference sum
                           diamonds are bounds for interpretation
            2) Zijderveld plot:  closed (open) symbols are X-Y (X-Z) planes
                                 X rotated to NRM direction
            3) (De/Re)Magnetization diagram:
                           circles are NRM remaining
                           squares are pTRM gained
            4) equal area projections:
               green triangles are pTRM gained direction
                           red (purple) circles are lower(upper) hemisphere of ZI step directions
                           blue (cyan) squares are lower(upper) hemisphere IZ step directions
            5) Optional:  TRM acquisition
            6) Optional: TDS normalization
        command line window:
            list is: temperature step numbers, temperatures (C), Dec, Inc, Int (units of measuements)
                     list of possible commands: type letter followed by return to select option
                     saving of plots creates image files with specimen, plot type as name
    """
    #
    #   initializations
    #
    version_num = pmag.get_version()
    verbose = pmagplotlib.verbose
    #
    # default acceptance criteria
    #
    accept = pmag.default_criteria(0)[0]  # set the default criteria
    #
    # parse command line options
    #
    plots, fmt, Zdiff = 0, 'svg', 0
    if '-h' in sys.argv:
        print(main.__doc__)
        sys.exit()
    dir_path = pmag.get_named_arg_from_sys("-WD", default_val=os.getcwd())
    meas_file = pmag.get_named_arg_from_sys("-f",
                                            default_val="measurements.txt")
    spec_file = pmag.get_named_arg_from_sys("-fsp",
                                            default_val="specimens.txt")
    crit_file = pmag.get_named_arg_from_sys("-fcr", default_val="criteria.txt")
    spec_file = os.path.join(dir_path, spec_file)
    meas_file = os.path.join(dir_path, meas_file)
    crit_file = os.path.join(dir_path, crit_file)
    fmt = pmag.get_named_arg_from_sys("-fmt", "svg")
    if '-sav' in sys.argv: plots, verbose = 1, 0
    if '-z' in sys.argv: Zdiff = 1
    specimen = pmag.get_named_arg_from_sys("-spc", default_val="")
    if '-b' in sys.argv:
        ind = sys.argv.index('-b')
        start = int(sys.argv[ind + 1])
        end = int(sys.argv[ind + 2])
    else:
        start, end = "", ""
    fnames = {
        'measurements': meas_file,
        'specimens': spec_file,
        'criteria': crit_file
    }
    contribution = nb.Contribution(
        dir_path,
        custom_filenames=fnames,
        read_tables=['measurements', 'specimens', 'criteria'])
    #
    #   import  prior interpretations  from specimen file
    #
    specimen_cols = [
        'analysts', 'aniso_ftest', 'aniso_ftest12', 'aniso_ftest23', 'aniso_s',
        'aniso_s_mean', 'aniso_s_n_measurements', 'aniso_s_sigma',
        'aniso_s_unit', 'aniso_tilt_correction', 'aniso_type', 'aniso_v1',
        'aniso_v2', 'aniso_v3', 'citations', 'description', 'dir_alpha95',
        'dir_comp', 'dir_dec', 'dir_inc', 'dir_mad_free', 'dir_n_measurements',
        'dir_tilt_correction', 'experiments', 'geologic_classes',
        'geologic_types', 'hyst_bc', 'hyst_bcr', 'hyst_mr_moment',
        'hyst_ms_moment', 'int_abs', 'int_b', 'int_b_beta', 'int_b_sigma',
        'int_corr', 'int_dang', 'int_drats', 'int_f', 'int_fvds', 'int_gamma',
        'int_mad_free', 'int_md', 'int_n_measurements', 'int_n_ptrm', 'int_q',
        'int_rsc', 'int_treat_dc_field', 'lithologies', 'meas_step_max',
        'meas_step_min', 'meas_step_unit', 'method_codes', 'sample',
        'software_packages', 'specimen'
    ]
    if 'specimens' in contribution.tables:
        spec_container = contribution.tables['specimens']
        prior_spec_data = spec_container.get_records_for_code(
            'LP-PI-TRM',
            strict_match=False)  # look up all prior intensity interpretations
    else:
        spec_container, prior_spec_data = None, []
    backup = 0
    #
    Mkeys = ['magn_moment', 'magn_volume', 'magn_mass']
    #
    #   create measurement dataframe
    #
    meas_container = contribution.tables['measurements']
    meas_data = meas_container.df
    #
    meas_data['method_codes'] = meas_data['method_codes'].str.replace(
        " ", "")  # get rid of nasty spaces
    meas_data = meas_data[meas_data['method_codes'].str.contains(
        'LP-PI-TRM|LP-TRM|LP-TRM-TD') ==
                          True]  # fish out zero field steps for plotting
    intensity_types = [
        col_name for col_name in meas_data.columns if col_name in Mkeys
    ]
    int_key = intensity_types[
        0]  # plot first intensity method found - normalized to initial value anyway - doesn't matter which used
    meas_data = meas_data[meas_data[int_key].notnull(
    )]  # get all the non-null intensity records of the same type
    if 'flag' not in meas_data.columns:
        meas_data['flag'] = 'g'  # set the default flag to good
    meas_data = meas_data[meas_data['flag'].str.contains('g') ==
                          True]  # only the 'good' measurements
    thel_data = meas_data[meas_data['method_codes'].str.contains('LP-PI-TRM')
                          == True]  # get all the Thellier data
    trm_data = meas_data[meas_data['method_codes'].str.contains('LP-TRM') ==
                         True]  # get all the TRM acquisition data
    td_data = meas_data[meas_data['method_codes'].str.contains('LP-TRM-TD') ==
                        True]  # get all the TD data
    anis_data = meas_data[meas_data['method_codes'].str.contains('LP-AN') ==
                          True]  # get all the anisotropy data
    #
    # get list of unique specimen names from measurement data
    #
    specimen_names = meas_data.specimen.unique(
    )  # this is a Series of all the specimen names
    specimen_names = specimen_names.tolist()  # turns it into a list
    specimen_names.sort()  # sorts by specimen name
    #
    # set up new DataFrame for this sessions specimen interpretations
    #
    spec_container = nb.MagicDataFrame(dtype='specimens',
                                       columns=specimen_cols)
    current_spec_data = spec_container.df  # this is for interpretations from this session
    if specimen == "":  # do all specimens
        k = 0
    else:
        k = specimen_names.index(specimen)  # just do this one
    # define figure numbers for arai, zijderveld and
    #   de-,re-magnetization diagrams
    AZD = {}
    AZD['deremag'], AZD['zijd'], AZD['arai'], AZD['eqarea'] = 1, 2, 3, 4
    pmagplotlib.plot_init(AZD['arai'], 5, 5)
    pmagplotlib.plot_init(AZD['zijd'], 5, 5)
    pmagplotlib.plot_init(AZD['deremag'], 5, 5)
    pmagplotlib.plot_init(AZD['eqarea'], 5, 5)
    if len(trm_data) > 0:
        AZD['TRM'] = 5
        pmagplotlib.plot_init(AZD['TRM'], 5, 5)
    if len(td_data) > 0:
        AZD['TDS'] = 6
        pmagplotlib.plot_init(AZD['TDS'], 5, 5)
    #
    while k < len(specimen_names):
        this_specimen = specimen_names[
            k]  # set the current specimen for plotting
        if verbose and this_specimen != "":
            print(this_specimen, k + 1, 'out of ', len(specimen_names))
        #
        #    set up datablocks
        #
        thelblock = thel_data[thel_data['specimen'].str.contains(this_specimen)
                              == True]  # fish out this specimen
        trmblock = trm_data[trm_data['specimen'].str.contains(this_specimen) ==
                            True]  # fish out this specimen
        tdsrecs = td_data[td_data['specimen'].str.contains(this_specimen) ==
                          True]  # fish out this specimen
        anisblock = anis_data[anis_data['specimen'].str.contains(this_specimen)
                              == True]  # fish out the anisotropy data
        prior_specimen_interpretations = prior_spec_data[
            prior_spec_data['specimen'].str.contains(
                this_specimen) == True]  # fish out prior interpretation
        #
        # sort data into types
        #
        araiblock, field = pmag.sortarai(thelblock,
                                         this_specimen,
                                         Zdiff,
                                         version=3)
        first_Z = araiblock[0]
        GammaChecks = araiblock[5]
        if len(first_Z) < 3:
            if backup == 0:
                k += 1
                if verbose:
                    print('skipping specimen - moving forward ', this_specimen)
            else:
                k -= 1
                if verbose:
                    print('skipping specimen - moving backward ',
                          this_specimen)
        else:
            backup = 0
            zijdblock, units = pmag.find_dmag_rec(this_specimen,
                                                  thelblock,
                                                  version=3)
            if start == "" and len(prior_specimen_interpretations) > 0:
                if verbose: print('Looking up saved interpretation....')
                #
                # get prior interpretation steps
                #
                beg_int = pd.to_numeric(prior_specimen_interpretations.
                                        meas_step_min.values).tolist()[0]
                end_int = pd.to_numeric(prior_specimen_interpretations.
                                        meas_step_max.values).tolist()[0]
            else:
                beg_int, end_int = "", ""
            recnum = 0
            if verbose: print("index step Dec   Inc  Int       Gamma")
            for plotrec in zijdblock:
                if plotrec[0] == beg_int:
                    start = recnum  # while we are at it, collect these bounds
                if plotrec[0] == end_int: end = recnum
                if verbose:
                    if GammaChecks != "":
                        gamma = ""
                        for g in GammaChecks:
                            if g[0] == plotrec[0] - 273:
                                gamma = g[1]
                                break
                    if gamma != "":
                        print('%i     %i %7.1f %7.1f %8.3e %7.1f' %
                              (recnum, plotrec[0] - 273, plotrec[1],
                               plotrec[2], plotrec[3], gamma))
                    else:
                        print('%i     %i %7.1f %7.1f %8.3e ' %
                              (recnum, plotrec[0] - 273, plotrec[1],
                               plotrec[2], plotrec[3]))
                recnum += 1
            for fig in list(AZD.keys()):
                pmagplotlib.clearFIG(AZD[fig])  # clear all figures
            pmagplotlib.plotAZ(AZD, araiblock, zijdblock, this_specimen,
                               units[0])
            if verbose: pmagplotlib.drawFIGS(AZD)
            pars, errcode = pmag.PintPars(thelblock,
                                          araiblock,
                                          zijdblock,
                                          start,
                                          end,
                                          accept,
                                          version=3)
            pars['measurement_step_unit'] = "K"
            pars['experiment_type'] = 'LP-PI-TRM'
            #
            # work on saving interpretations stuff later
            #
            if errcode != 1:  # no problem in PintPars
                pars["specimen_lab_field_dc"] = field
                pars["specimen_int"] = -1 * field * pars["specimen_b"]
                pars["er_specimen_name"] = this_specimen
                #pars,kill=pmag.scoreit(pars,this_specimen_interpretation,accept,'',verbose) # deal with this later
                pars["specimen_grade"] = 'None'
                pars['measurement_step_min'] = pars['meas_step_min']
                pars['measurement_step_max'] = pars['meas_step_max']
                if pars['measurement_step_unit'] == 'K':
                    outstr = "specimen     Tmin  Tmax  N  lab_field  B_anc  b  q  f(coe)  Fvds  beta  MAD  Dang  Drats  Nptrm  Grade  R  MD%  sigma  Gamma_max \n"
                    pars_out = (this_specimen, (pars["meas_step_min"] - 273),
                                (pars["meas_step_max"] -
                                 273), (pars["specimen_int_n"]),
                                1e6 * (pars["specimen_lab_field_dc"]),
                                1e6 * (pars["specimen_int"]),
                                pars["specimen_b"], pars["specimen_q"],
                                pars["specimen_f"], pars["specimen_fvds"],
                                pars["specimen_b_beta"], pars["int_mad_free"],
                                pars["int_dang"], pars["int_drats"],
                                pars["int_n_ptrm"], pars["specimen_grade"],
                                np.sqrt(pars["specimen_rsc"]),
                                int(pars["int_md"]), pars["specimen_b_sigma"],
                                pars['specimen_gamma'])
                    outstring = '%s %4.0f %4.0f %i %4.1f %4.1f %5.3f %5.1f %5.3f %5.3f %5.3f  %7.1f %7.1f %7.1f %s %s %6.3f %i %5.3f %7.1f' % pars_out + '\n'
                elif pars['measurement_step_unit'] == 'J':
                    outstr = "specimen     Wmin  Wmax  N  lab_field  B_anc  b  q  f(coe)  Fvds  beta  MAD  Dang  Drats  Nptrm  Grade  R  MD%  sigma  ThetaMax DeltaMax GammaMax\n"
                    pars_out = (
                        this_specimen, (pars["meas_step_min"]),
                        (pars["meas_step_max"]), (pars["specimen_int_n"]),
                        1e6 * (pars["specimen_lab_field_dc"]),
                        1e6 * (pars["specimen_int"]), pars["specimen_b"],
                        pars["specimen_q"], pars["specimen_f"],
                        pars["specimen_fvds"], pars["specimen_b_beta"],
                        pars["specimen_int_mad"], pars["specimen_int_dang"],
                        pars["specimen_drats"], pars["specimen_int_ptrm_n"],
                        pars["specimen_grade"], np.sqrt(pars["specimen_rsc"]),
                        int(pars["specimen_md"]), pars["specimen_b_sigma"],
                        pars["specimen_theta"], pars["specimen_delta"],
                        pars["specimen_gamma"])
                    outstring = '%s %4.0f %4.0f %i %4.1f %4.1f %5.3f %5.1f %5.3f %5.3f %5.3f  %7.1f %7.1f %7.1f %s %s %6.3f %i %5.3f %7.1f %7.1f %7.1f' % pars_out + '\n'
                print(outstr)
                print(outstring)
                pmagplotlib.plotB(AZD, araiblock, zijdblock, pars)
                mpars = pmag.domean(araiblock[1], start, end, 'DE-BFL')
                if verbose:
                    pmagplotlib.drawFIGS(AZD)
                    print('pTRM direction= ',
                          '%7.1f' % (mpars['specimen_dec']),
                          ' %7.1f' % (mpars['specimen_inc']), ' MAD:',
                          '%7.1f' % (mpars['specimen_mad']))
            if len(anisblock) > 0:  # this specimen has anisotropy data
                if verbose:
                    print('Found anisotropy record... but ignoring for now ')
            if plots == 1:
                if fmt != "pmag":
                    files = {}
                    for key in list(AZD.keys()):
                        files[
                            key] = 'SP:_' + this_specimen + '_TY:_' + key + '_' + '.' + fmt
                    if pmagplotlib.isServer:
                        black = '#000000'
                        purple = '#800080'
                        titles = {}
                        titles['deremag'] = 'DeReMag Plot'
                        titles['zijd'] = 'Zijderveld Plot'
                        titles['arai'] = 'Arai Plot'
                        titles['TRM'] = 'TRM Acquisition data'
                        AZD = pmagplotlib.addBorders(AZD, titles, black,
                                                     purple)
                    pmagplotlib.saveP(AZD, files)
                else:  # save in pmag format
                    print('pmag format no longer supported')
                    #script="grep "+this_specimen+" output.mag | thellier -mfsi"
                    #script=script+' %8.4e'%(field)
                    #min='%i'%((pars["measurement_step_min"]-273))
                    #Max='%i'%((pars["measurement_step_max"]-273))
                    #script=script+" "+min+" "+Max
                    #script=script+" |plotxy;cat mypost >>thellier.ps\n"
                    #pltf.write(script)
                    #pmag.domagicmag(outf,MeasRecs)
            if specimen != "": sys.exit()  # syonara
            if verbose:
                ans = input('Return for next specimen, q to quit:  ')
                if ans == 'q': sys.exit()
            k += 1  # moving on
Esempio n. 18
0
def main():
    """
    NAME
       zeq.py
  
    DESCRIPTION
       plots demagnetization data. The equal area projection has the X direction (usually North in geographic coordinates)
          to the top.  The red line is the X axis of the Zijderveld diagram.  Solid symbols are lower hemisphere. 
          The solid (open) symbols in the Zijderveld diagram are X,Y (X,Z) pairs.  The demagnetization diagram plots the
          fractional remanence remaining after each step. The green line is the fraction of the total remaence removed 
          between each step.        

    INPUT FORMAT
       takes specimen_name treatment intensity declination inclination  in space
 delimited file

    SYNTAX
        zeq.py [command line options

    OPTIONS
        -f FILE for reading from command line
        -u [mT,C] specify units of mT OR C, default is unscaled
        -sav save figure and quit
        -fmt [svg,jpg,png,pdf] set figure format [default is svg]
        -beg [step number] treatment step for beginning of PCA calculation, 0 is default
        -end [step number] treatment step for end of PCA calculation, last step is default
        -ct [l,p,f] Calculation Type: best-fit line,  plane or fisher mean; line is default

    """
    files, fmt, plot = {}, 'svg', 0
    end_pca, beg_pca = "", ""
    calculation_type = 'DE-BFL'
    if '-h' in sys.argv:  # check if help is needed
        print(main.__doc__)
        sys.exit()  # graceful quit
    else:
        if '-f' in sys.argv:
            ind = sys.argv.index('-f')
            file = sys.argv[ind + 1]
        else:
            print(main.__doc__)
            sys.exit()
        if '-u' in sys.argv:
            ind = sys.argv.index('-u')
            units = sys.argv[ind + 1]
            if units == "C": SIunits = "K"
            if units == "mT": SIunits = "T"
        else:
            units = "U"
            SIunits = "U"
    if '-sav' in sys.argv: plot = 1
    if '-ct' in sys.argv:
        ind = sys.argv.index('-ct')
        ct = sys.argv[ind + 1]
        if ct == 'f': calculation_type = 'DE-FM'
        if ct == 'p': calculation_type = 'DE-BFP'
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt = sys.argv[ind + 1]
    if '-beg' in sys.argv:
        ind = sys.argv.index('-beg')
        beg_pca = int(sys.argv[ind + 1])
    if '-end' in sys.argv:
        ind = sys.argv.index('-end')
        end_pca = int(sys.argv[ind + 1])
    f = open(file, 'r')
    data = f.readlines()
    #
    datablock = []  # set up list for data
    s = ""  # initialize specimen name
    angle = 0.
    for line in data:  # read in the data from standard input
        rec = line.split()  # split each line on space to get records
        if angle == "": angle = float(rec[3])
        if s == "": s = rec[0]
        if units == 'mT':
            datablock.append([
                float(rec[1]) * 1e-3,
                float(rec[3]),
                float(rec[4]), 1e-3 * float(rec[2]), '', 'g'
            ])  # treatment, dec, inc, int # convert to T and Am^2 (assume emu)
        if units == 'C':
            datablock.append([
                float(rec[1]) + 273.,
                float(rec[3]),
                float(rec[4]), 1e-3 * float(rec[2]), '', 'g'
            ])  # treatment, dec, inc, int, convert to K and Am^2, assume emu
        if units == 'U':
            datablock.append([
                float(rec[1]),
                float(rec[3]),
                float(rec[4]),
                float(rec[2]), '', 'g'
            ])  # treatment, dec, inc, int, using unscaled units


# define figure numbers in a dictionary for equal area, zijderveld,
#  and intensity vs. demagnetiztion step respectively
    ZED = {}
    ZED['eqarea'], ZED['zijd'], ZED['demag'] = 1, 2, 3
    pmagplotlib.plot_init(ZED['eqarea'], 5, 5)  # initialize plots
    pmagplotlib.plot_init(ZED['zijd'], 5, 5)
    pmagplotlib.plot_init(ZED['demag'], 5, 5)
    #
    #
    pmagplotlib.plotZED(ZED, datablock, angle, s, SIunits)  # plot the data
    if plot == 0: pmagplotlib.drawFIGS(ZED)
    #
    # print out data for this sample to screen
    #
    recnum = 0
    for plotrec in datablock:
        if units == 'mT':
            print(
                '%i  %7.1f %8.3e %7.1f %7.1f ' %
                (recnum, plotrec[0] * 1e3, plotrec[3], plotrec[1], plotrec[2]))
        if units == 'C':
            print('%i  %7.1f %8.3e %7.1f %7.1f ' %
                  (recnum, plotrec[0] - 273., plotrec[3], plotrec[1],
                   plotrec[2]))
        if units == 'U':
            print('%i  %7.1f %8.3e %7.1f %7.1f ' %
                  (recnum, plotrec[0], plotrec[3], plotrec[1], plotrec[2]))
        recnum += 1
    if plot == 0:
        while 1:
            if beg_pca != "" and end_pca != "" and calculation_type != "":
                pmagplotlib.plotZED(ZED, datablock, angle, s,
                                    SIunits)  # plot the data
                mpars = pmag.domean(
                    datablock, beg_pca, end_pca,
                    calculation_type)  # get best-fit direction/great circle
                pmagplotlib.plotDir(
                    ZED, mpars, datablock,
                    angle)  # plot the best-fit direction/great circle
                print('Specimen, calc_type, N, min, max, MAD, dec, inc')
                if units == 'mT':
                    print('%s %s %i  %6.2f %6.2f %6.1f %7.1f %7.1f' %
                          (s, calculation_type, mpars["specimen_n"],
                           mpars["measurement_step_min"] * 1e3,
                           mpars["measurement_step_max"] * 1e3,
                           mpars["specimen_mad"], mpars["specimen_dec"],
                           mpars["specimen_inc"]))
                if units == 'C':
                    print('%s %s %i  %6.2f %6.2f %6.1f %7.1f %7.1f' %
                          (s, calculation_type, mpars["specimen_n"],
                           mpars["measurement_step_min"] - 273,
                           mpars["measurement_step_max"] - 273,
                           mpars["specimen_mad"], mpars["specimen_dec"],
                           mpars["specimen_inc"]))
                if units == 'U':
                    print(
                        '%s %s %i  %6.2f %6.2f %6.1f %7.1f %7.1f' %
                        (s, calculation_type, mpars["specimen_n"],
                         mpars["measurement_step_min"],
                         mpars["measurement_step_max"], mpars["specimen_mad"],
                         mpars["specimen_dec"], mpars["specimen_inc"]))
            if end_pca == "":
                end_pca = len(
                    datablock
                ) - 1  # initialize end_pca, beg_pca to first and last measurement
            if beg_pca == "": beg_pca = 0
            ans = input(
                " s[a]ve plot, [b]ounds for pca and calculate, change [h]orizontal projection angle, [q]uit:   "
            )
            if ans == 'q':
                sys.exit()
            if ans == 'a':
                files = {}
                for key in list(ZED.keys()):
                    files[key] = s + '_' + key + '.' + fmt
                pmagplotlib.saveP(ZED, files)
            if ans == 'h':
                angle = float(
                    input(" Declination to project onto horizontal axis? "))
                pmagplotlib.plotZED(ZED, datablock, angle, s,
                                    SIunits)  # plot the data

            if ans == 'b':
                GoOn = 0
                while GoOn == 0:  # keep going until reasonable bounds are set
                    print('Enter index of first point for pca: ', '[', beg_pca,
                          ']')
                    answer = input('return to keep default  ')
                    if answer != "": beg_pca = int(answer)
                    print('Enter index  of last point for pca: ', '[', end_pca,
                          ']')
                    answer = input('return to keep default  ')
                    if answer != "":
                        end_pca = int(answer)
                    if beg_pca >= 0 and beg_pca <= len(
                            datablock) - 2 and end_pca > 0 and end_pca < len(
                                datablock):
                        GoOn = 1
                    else:
                        print("Bad entry of indices - try again")
                        end_pca = len(datablock) - 1
                        beg_pca = 0
                GoOn = 0
                while GoOn == 0:
                    ct = input(
                        'Enter Calculation Type: best-fit line,  plane or fisher mean [l]/p/f :  '
                    )
                    if ct == "" or ct == "l":
                        calculation_type = "DE-BFL"
                        GoOn = 1  # all good
                    elif ct == 'p':
                        calculation_type = "DE-BFP"
                        GoOn = 1  # all good
                    elif ct == 'f':
                        calculation_type = "DE-FM"
                        GoOn = 1  # all good
                    else:
                        print("bad entry of calculation type: try again. "
                              )  # keep going
                    pmagplotlib.plotZED(ZED, datablock, angle, s,
                                        SIunits)  # plot the data
                    mpars = pmag.domean(
                        datablock, beg_pca, end_pca, calculation_type
                    )  # get best-fit direction/great circle
                    pmagplotlib.plotDir(
                        ZED, mpars, datablock,
                        angle)  # plot the best-fit direction/great circle
                    print('Specimen, calc_type, N, min, max, MAD, dec, inc')
                    if units == 'mT':
                        print('%s %s %i  %6.2f %6.2f %6.1f %7.1f %7.1f' %
                              (s, calculation_type, mpars["specimen_n"],
                               mpars["measurement_step_min"] * 1e3,
                               mpars["measurement_step_max"] * 1e3,
                               mpars["specimen_mad"], mpars["specimen_dec"],
                               mpars["specimen_inc"]))
                    if units == 'C':
                        print('%s %s %i  %6.2f %6.2f %6.1f %7.1f %7.1f' %
                              (s, calculation_type, mpars["specimen_n"],
                               mpars["measurement_step_min"] - 273,
                               mpars["measurement_step_max"] - 273,
                               mpars["specimen_mad"], mpars["specimen_dec"],
                               mpars["specimen_inc"]))
                    if units == 'U':
                        print('%s %s %i  %6.2f %6.2f %6.1f %7.1f %7.1f' %
                              (s, calculation_type, mpars["specimen_n"],
                               mpars["measurement_step_min"],
                               mpars["measurement_step_max"],
                               mpars["specimen_mad"], mpars["specimen_dec"],
                               mpars["specimen_inc"]))
            pmagplotlib.drawFIGS(ZED)
    else:
        print(beg_pca, end_pca)
        if beg_pca != "" and end_pca != "":
            pmagplotlib.plotZED(ZED, datablock, angle, s,
                                SIunits)  # plot the data
            mpars = pmag.domean(
                datablock, beg_pca, end_pca,
                calculation_type)  # get best-fit direction/great circle
            pmagplotlib.plotDir(
                ZED, mpars, datablock,
                angle)  # plot the best-fit direction/great circle
            print('Specimen, calc_type, N, min, max, MAD, dec, inc')
            if units == 'mT':
                print('%s %s %i  %6.2f %6.2f %6.1f %7.1f %7.1f' %
                      (s, calculation_type, mpars["specimen_n"],
                       mpars["measurement_step_min"] * 1e3,
                       mpars["measurement_step_max"] * 1e3,
                       mpars["specimen_mad"], mpars["specimen_dec"],
                       mpars["specimen_inc"]))
            if units == 'C':
                print('%s %s %i  %6.2f %6.2f %6.1f %7.1f %7.1f' %
                      (s, calculation_type, mpars["specimen_n"],
                       mpars["measurement_step_min"] - 273,
                       mpars["measurement_step_max"] - 273,
                       mpars["specimen_mad"], mpars["specimen_dec"],
                       mpars["specimen_inc"]))
            if units == 'U':
                print('%s %s %i  %6.2f %6.2f %6.1f %7.1f %7.1f' %
                      (s, calculation_type, mpars["specimen_n"],
                       mpars["measurement_step_min"],
                       mpars["measurement_step_max"], mpars["specimen_mad"],
                       mpars["specimen_dec"], mpars["specimen_inc"]))
        files = {}
        for key in list(ZED.keys()):
            files[key] = s + '_' + key + '.' + fmt
        pmagplotlib.saveP(ZED, files)
Esempio n. 19
0
def main():
    """
    NAME
        aniso_magic.py

    DESCRIPTION
        plots anisotropy data with either bootstrap or hext ellipses

    SYNTAX
        aniso_magic.py [-h] [command line options]
    OPTIONS
        -h plots help message and quits
        -usr USER: set the user name
        -f AFILE, specify rmag_anisotropy formatted file for input
        -F RFILE, specify rmag_results formatted file for output
        -x Hext [1963] and bootstrap
        -B DON'T do bootstrap, do Hext
        -par Tauxe [1998] parametric bootstrap
        -v plot bootstrap eigenvectors instead of ellipses
        -sit plot by site instead of entire file
        -crd [s,g,t] coordinate system, default is specimen (g=geographic, t=tilt corrected)
        -P don't make any plots - just make rmag_results table
        -sav don't make the rmag_results table - just save all the plots
        -fmt [svg, jpg, eps] format for output images, pdf default
        -gtc DEC INC  dec,inc of pole to great circle [down(up) in green (cyan)
        -d Vi DEC INC; Vi (1,2,3) to compare to direction DEC INC
        -nb N; specifies the number of bootstraps - default is 1000
    DEFAULTS
       AFILE:  rmag_anisotropy.txt
       RFILE:  rmag_results.txt
       plot bootstrap ellipses of Constable & Tauxe [1987]
    NOTES
       minor axis: circles
       major axis: triangles
       principal axis: squares
       directions are plotted on the lower hemisphere
       for bootstrapped eigenvector components: Xs: blue, Ys: red, Zs: black
"""
    #
    dir_path = "."
    version_num = pmag.get_version()
    verbose = pmagplotlib.verbose
    args = sys.argv
    ipar, ihext, ivec, iboot, imeas, isite, iplot, vec = 0, 0, 0, 1, 1, 0, 1, 0
    hpars, bpars, PDir = [], [], []
    CS, crd = '-1', 's'
    nb = 1000
    fmt = 'pdf'
    ResRecs = []
    orlist = []
    outfile, comp, Dir, gtcirc, PDir = 'rmag_results.txt', 0, [], 0, []
    infile = 'rmag_anisotropy.txt'
    if "-h" in args:
        print(main.__doc__)
        sys.exit()
    if '-WD' in args:
        ind = args.index('-WD')
        dir_path = args[ind + 1]
    if '-nb' in args:
        ind = args.index('-nb')
        nb = int(args[ind + 1])
    if '-usr' in args:
        ind = args.index('-usr')
        user = args[ind + 1]
    else:
        user = ""
    if '-B' in args: iboot, ihext = 0, 1
    if '-par' in args: ipar = 1
    if '-x' in args: ihext = 1
    if '-v' in args: ivec = 1
    if '-sit' in args: isite = 1
    if '-P' in args: iplot = 0
    if '-f' in args:
        ind = args.index('-f')
        infile = args[ind + 1]
    if '-F' in args:
        ind = args.index('-F')
        outfile = args[ind + 1]
    if '-crd' in sys.argv:
        ind = sys.argv.index('-crd')
        crd = sys.argv[ind + 1]
        if crd == 'g': CS = '0'
        if crd == 't': CS = '100'
    if '-fmt' in args:
        ind = args.index('-fmt')
        fmt = args[ind + 1]
    if '-sav' in args:
        plots = 1
        verbose = 0
    else:
        plots = 0
    if '-gtc' in args:
        ind = args.index('-gtc')
        d, i = float(args[ind + 1]), float(args[ind + 2])
        PDir.append(d)
        PDir.append(i)
    if '-d' in args:
        comp = 1
        ind = args.index('-d')
        vec = int(args[ind + 1]) - 1
        Dir = [float(args[ind + 2]), float(args[ind + 3])]
#
# set up plots
#
    if infile[0] != '/': infile = dir_path + '/' + infile
    if outfile[0] != '/': outfile = dir_path + '/' + outfile
    ANIS = {}
    initcdf, inittcdf = 0, 0
    ANIS['data'], ANIS['conf'] = 1, 2
    if iboot == 1:
        ANIS['tcdf'] = 3
        if iplot == 1:
            inittcdf = 1
            pmagplotlib.plot_init(ANIS['tcdf'], 5, 5)
        if comp == 1 and iplot == 1:
            initcdf = 1
            ANIS['vxcdf'], ANIS['vycdf'], ANIS['vzcdf'] = 4, 5, 6
            pmagplotlib.plot_init(ANIS['vxcdf'], 5, 5)
            pmagplotlib.plot_init(ANIS['vycdf'], 5, 5)
            pmagplotlib.plot_init(ANIS['vzcdf'], 5, 5)
    if iplot == 1:
        pmagplotlib.plot_init(ANIS['conf'], 5, 5)
        pmagplotlib.plot_init(ANIS['data'], 5, 5)
# read in the data
    data, ifiletype = pmag.magic_read(infile)
    for rec in data:  # find all the orientation systems
        if 'anisotropy_tilt_correction' not in rec.keys():
            rec['anisotropy_tilt_correction'] = '-1'
        if rec['anisotropy_tilt_correction'] not in orlist:
            orlist.append(rec['anisotropy_tilt_correction'])
    if CS not in orlist:
        if len(orlist) > 0:
            CS = orlist[0]
        else:
            CS = '-1'
        if CS == '-1': crd = 's'
        if CS == '0': crd = 'g'
        if CS == '100': crd = 't'
        if verbose:
            print("desired coordinate system not available, using available: ",
                  crd)
    if isite == 1:
        sitelist = []
        for rec in data:
            if rec['er_site_name'] not in sitelist:
                sitelist.append(rec['er_site_name'])
        sitelist.sort()
        plt = len(sitelist)
    else:
        plt = 1
    k = 0
    while k < plt:
        site = ""
        sdata, Ss = [], []  # list of S format data
        Locs, Sites, Samples, Specimens, Cits = [], [], [], [], []
        if isite == 0:
            sdata = data
        else:
            site = sitelist[k]
            for rec in data:
                if rec['er_site_name'] == site: sdata.append(rec)
        anitypes = []
        csrecs = pmag.get_dictitem(sdata, 'anisotropy_tilt_correction', CS,
                                   'T')
        for rec in csrecs:
            if rec['anisotropy_type'] not in anitypes:
                anitypes.append(rec['anisotropy_type'])
            if rec['er_location_name'] not in Locs:
                Locs.append(rec['er_location_name'])
            if rec['er_site_name'] not in Sites:
                Sites.append(rec['er_site_name'])
            if rec['er_sample_name'] not in Samples:
                Samples.append(rec['er_sample_name'])
            if rec['er_specimen_name'] not in Specimens:
                Specimens.append(rec['er_specimen_name'])
            if rec['er_citation_names'] not in Cits:
                Cits.append(rec['er_citation_names'])
            s = []
            s.append(float(rec["anisotropy_s1"]))
            s.append(float(rec["anisotropy_s2"]))
            s.append(float(rec["anisotropy_s3"]))
            s.append(float(rec["anisotropy_s4"]))
            s.append(float(rec["anisotropy_s5"]))
            s.append(float(rec["anisotropy_s6"]))
            if s[0] <= 1.0: Ss.append(s)  # protect against crap
            #tau,Vdirs=pmag.doseigs(s)
            ResRec = {}
            ResRec['er_location_names'] = rec['er_location_name']
            ResRec['er_citation_names'] = rec['er_citation_names']
            ResRec['er_site_names'] = rec['er_site_name']
            ResRec['er_sample_names'] = rec['er_sample_name']
            ResRec['er_specimen_names'] = rec['er_specimen_name']
            ResRec['rmag_result_name'] = rec['er_specimen_name'] + ":" + rec[
                'anisotropy_type']
            ResRec["er_analyst_mail_names"] = user
            ResRec["tilt_correction"] = CS
            ResRec["anisotropy_type"] = rec['anisotropy_type']
            if "anisotropy_n" not in rec.keys(): rec["anisotropy_n"] = "6"
            if "anisotropy_sigma" not in rec.keys():
                rec["anisotropy_sigma"] = "0"
            fpars = pmag.dohext(
                int(rec["anisotropy_n"]) - 6, float(rec["anisotropy_sigma"]),
                s)
            ResRec["anisotropy_v1_dec"] = '%7.1f' % (fpars['v1_dec'])
            ResRec["anisotropy_v2_dec"] = '%7.1f' % (fpars['v2_dec'])
            ResRec["anisotropy_v3_dec"] = '%7.1f' % (fpars['v3_dec'])
            ResRec["anisotropy_v1_inc"] = '%7.1f' % (fpars['v1_inc'])
            ResRec["anisotropy_v2_inc"] = '%7.1f' % (fpars['v2_inc'])
            ResRec["anisotropy_v3_inc"] = '%7.1f' % (fpars['v3_inc'])
            ResRec["anisotropy_t1"] = '%10.8f' % (fpars['t1'])
            ResRec["anisotropy_t2"] = '%10.8f' % (fpars['t2'])
            ResRec["anisotropy_t3"] = '%10.8f' % (fpars['t3'])
            ResRec["anisotropy_ftest"] = '%10.3f' % (fpars['F'])
            ResRec["anisotropy_ftest12"] = '%10.3f' % (fpars['F12'])
            ResRec["anisotropy_ftest23"] = '%10.3f' % (fpars['F23'])
            ResRec["result_description"] = 'F_crit: ' + fpars[
                'F_crit'] + '; F12,F23_crit: ' + fpars['F12_crit']
            ResRec['anisotropy_type'] = pmag.makelist(anitypes)
            ResRecs.append(ResRec)
        if len(Ss) > 1:
            if pmagplotlib.isServer:
                title = "LO:_" + ResRec[
                    'er_location_names'] + '_SI:_' + site + '_SA:__SP:__CO:_' + crd
            else:
                title = ResRec['er_location_names']
                if site:
                    title += "_{}".format(site)
                title += '_{}'.format(crd)
            ResRec['er_location_names'] = pmag.makelist(Locs)
            bpars, hpars = pmagplotlib.plotANIS(ANIS, Ss, iboot, ihext, ivec,
                                                ipar, title, iplot, comp, vec,
                                                Dir, nb)
            if len(PDir) > 0:
                pmagplotlib.plotC(ANIS['data'], PDir, 90., 'g')
                pmagplotlib.plotC(ANIS['conf'], PDir, 90., 'g')
            if verbose and plots == 0: pmagplotlib.drawFIGS(ANIS)
            ResRec['er_location_names'] = pmag.makelist(Locs)
            if plots == 1:
                save(ANIS, fmt, title)
            ResRec = {}
            ResRec['er_citation_names'] = pmag.makelist(Cits)
            ResRec['er_location_names'] = pmag.makelist(Locs)
            ResRec['er_site_names'] = pmag.makelist(Sites)
            ResRec['er_sample_names'] = pmag.makelist(Samples)
            ResRec['er_specimen_names'] = pmag.makelist(Specimens)
            ResRec['rmag_result_name'] = pmag.makelist(
                Sites) + ":" + pmag.makelist(anitypes)
            ResRec['anisotropy_type'] = pmag.makelist(anitypes)
            ResRec["er_analyst_mail_names"] = user
            ResRec["tilt_correction"] = CS
            if isite == "0":
                ResRec[
                    'result_description'] = "Study average using coordinate system: " + CS
            if isite == "1":
                ResRec[
                    'result_description'] = "Site average using coordinate system: " + CS
            if hpars != [] and ihext == 1:
                HextRec = {}
                for key in ResRec.keys():
                    HextRec[key] = ResRec[key]  # copy over stuff
                HextRec["anisotropy_v1_dec"] = '%7.1f' % (hpars["v1_dec"])
                HextRec["anisotropy_v2_dec"] = '%7.1f' % (hpars["v2_dec"])
                HextRec["anisotropy_v3_dec"] = '%7.1f' % (hpars["v3_dec"])
                HextRec["anisotropy_v1_inc"] = '%7.1f' % (hpars["v1_inc"])
                HextRec["anisotropy_v2_inc"] = '%7.1f' % (hpars["v2_inc"])
                HextRec["anisotropy_v3_inc"] = '%7.1f' % (hpars["v3_inc"])
                HextRec["anisotropy_t1"] = '%10.8f' % (hpars["t1"])
                HextRec["anisotropy_t2"] = '%10.8f' % (hpars["t2"])
                HextRec["anisotropy_t3"] = '%10.8f' % (hpars["t3"])
                HextRec["anisotropy_hext_F"] = '%7.1f ' % (hpars["F"])
                HextRec["anisotropy_hext_F12"] = '%7.1f ' % (hpars["F12"])
                HextRec["anisotropy_hext_F23"] = '%7.1f ' % (hpars["F23"])
                HextRec["anisotropy_v1_eta_semi_angle"] = '%7.1f ' % (
                    hpars["e12"])
                HextRec["anisotropy_v1_eta_dec"] = '%7.1f ' % (hpars["v2_dec"])
                HextRec["anisotropy_v1_eta_inc"] = '%7.1f ' % (hpars["v2_inc"])
                HextRec["anisotropy_v1_zeta_semi_angle"] = '%7.1f ' % (
                    hpars["e13"])
                HextRec["anisotropy_v1_zeta_dec"] = '%7.1f ' % (
                    hpars["v3_dec"])
                HextRec["anisotropy_v1_zeta_inc"] = '%7.1f ' % (
                    hpars["v3_inc"])
                HextRec["anisotropy_v2_eta_semi_angle"] = '%7.1f ' % (
                    hpars["e12"])
                HextRec["anisotropy_v2_eta_dec"] = '%7.1f ' % (hpars["v1_dec"])
                HextRec["anisotropy_v2_eta_inc"] = '%7.1f ' % (hpars["v1_inc"])
                HextRec["anisotropy_v2_zeta_semi_angle"] = '%7.1f ' % (
                    hpars["e23"])
                HextRec["anisotropy_v2_zeta_dec"] = '%7.1f ' % (
                    hpars["v3_dec"])
                HextRec["anisotropy_v2_zeta_inc"] = '%7.1f ' % (
                    hpars["v3_inc"])
                HextRec["anisotropy_v3_eta_semi_angle"] = '%7.1f ' % (
                    hpars["e12"])
                HextRec["anisotropy_v3_eta_dec"] = '%7.1f ' % (hpars["v1_dec"])
                HextRec["anisotropy_v3_eta_inc"] = '%7.1f ' % (hpars["v1_inc"])
                HextRec["anisotropy_v3_zeta_semi_angle"] = '%7.1f ' % (
                    hpars["e23"])
                HextRec["anisotropy_v3_zeta_dec"] = '%7.1f ' % (
                    hpars["v2_dec"])
                HextRec["anisotropy_v3_zeta_inc"] = '%7.1f ' % (
                    hpars["v2_inc"])
                HextRec["magic_method_codes"] = 'LP-AN:AE-H'
                if verbose:
                    print("Hext Statistics: ")
                    print(
                        " tau_i, V_i_D, V_i_I, V_i_zeta, V_i_zeta_D, V_i_zeta_I, V_i_eta, V_i_eta_D, V_i_eta_I"
                    )
                    print(HextRec["anisotropy_t1"],
                          HextRec["anisotropy_v1_dec"],
                          HextRec["anisotropy_v1_inc"],
                          HextRec["anisotropy_v1_eta_semi_angle"],
                          HextRec["anisotropy_v1_eta_dec"],
                          HextRec["anisotropy_v1_eta_inc"],
                          HextRec["anisotropy_v1_zeta_semi_angle"],
                          HextRec["anisotropy_v1_zeta_dec"],
                          HextRec["anisotropy_v1_zeta_inc"])
                    print(HextRec["anisotropy_t2"],
                          HextRec["anisotropy_v2_dec"],
                          HextRec["anisotropy_v2_inc"],
                          HextRec["anisotropy_v2_eta_semi_angle"],
                          HextRec["anisotropy_v2_eta_dec"],
                          HextRec["anisotropy_v2_eta_inc"],
                          HextRec["anisotropy_v2_zeta_semi_angle"],
                          HextRec["anisotropy_v2_zeta_dec"],
                          HextRec["anisotropy_v2_zeta_inc"])
                    print(HextRec["anisotropy_t3"],
                          HextRec["anisotropy_v3_dec"],
                          HextRec["anisotropy_v3_inc"],
                          HextRec["anisotropy_v3_eta_semi_angle"],
                          HextRec["anisotropy_v3_eta_dec"],
                          HextRec["anisotropy_v3_eta_inc"],
                          HextRec["anisotropy_v3_zeta_semi_angle"],
                          HextRec["anisotropy_v3_zeta_dec"],
                          HextRec["anisotropy_v3_zeta_inc"])
                HextRec['magic_software_packages'] = version_num
                ResRecs.append(HextRec)
            if bpars != []:
                BootRec = {}
                for key in ResRec.keys():
                    BootRec[key] = ResRec[key]  # copy over stuff
                BootRec["anisotropy_v1_dec"] = '%7.1f' % (bpars["v1_dec"])
                BootRec["anisotropy_v2_dec"] = '%7.1f' % (bpars["v2_dec"])
                BootRec["anisotropy_v3_dec"] = '%7.1f' % (bpars["v3_dec"])
                BootRec["anisotropy_v1_inc"] = '%7.1f' % (bpars["v1_inc"])
                BootRec["anisotropy_v2_inc"] = '%7.1f' % (bpars["v2_inc"])
                BootRec["anisotropy_v3_inc"] = '%7.1f' % (bpars["v3_inc"])
                BootRec["anisotropy_t1"] = '%10.8f' % (bpars["t1"])
                BootRec["anisotropy_t2"] = '%10.8f' % (bpars["t2"])
                BootRec["anisotropy_t3"] = '%10.8f' % (bpars["t3"])
                BootRec["anisotropy_v1_eta_inc"] = '%7.1f ' % (
                    bpars["v1_eta_inc"])
                BootRec["anisotropy_v1_eta_dec"] = '%7.1f ' % (
                    bpars["v1_eta_dec"])
                BootRec["anisotropy_v1_eta_semi_angle"] = '%7.1f ' % (
                    bpars["v1_eta"])
                BootRec["anisotropy_v1_zeta_inc"] = '%7.1f ' % (
                    bpars["v1_zeta_inc"])
                BootRec["anisotropy_v1_zeta_dec"] = '%7.1f ' % (
                    bpars["v1_zeta_dec"])
                BootRec["anisotropy_v1_zeta_semi_angle"] = '%7.1f ' % (
                    bpars["v1_zeta"])
                BootRec["anisotropy_v2_eta_inc"] = '%7.1f ' % (
                    bpars["v2_eta_inc"])
                BootRec["anisotropy_v2_eta_dec"] = '%7.1f ' % (
                    bpars["v2_eta_dec"])
                BootRec["anisotropy_v2_eta_semi_angle"] = '%7.1f ' % (
                    bpars["v2_eta"])
                BootRec["anisotropy_v2_zeta_inc"] = '%7.1f ' % (
                    bpars["v2_zeta_inc"])
                BootRec["anisotropy_v2_zeta_dec"] = '%7.1f ' % (
                    bpars["v2_zeta_dec"])
                BootRec["anisotropy_v2_zeta_semi_angle"] = '%7.1f ' % (
                    bpars["v2_zeta"])
                BootRec["anisotropy_v3_eta_inc"] = '%7.1f ' % (
                    bpars["v3_eta_inc"])
                BootRec["anisotropy_v3_eta_dec"] = '%7.1f ' % (
                    bpars["v3_eta_dec"])
                BootRec["anisotropy_v3_eta_semi_angle"] = '%7.1f ' % (
                    bpars["v3_eta"])
                BootRec["anisotropy_v3_zeta_inc"] = '%7.1f ' % (
                    bpars["v3_zeta_inc"])
                BootRec["anisotropy_v3_zeta_dec"] = '%7.1f ' % (
                    bpars["v3_zeta_dec"])
                BootRec["anisotropy_v3_zeta_semi_angle"] = '%7.1f ' % (
                    bpars["v3_zeta"])
                BootRec["anisotropy_hext_F"] = ''
                BootRec["anisotropy_hext_F12"] = ''
                BootRec["anisotropy_hext_F23"] = ''
                BootRec[
                    "magic_method_codes"] = 'LP-AN:AE-H:AE-BS'  # regular bootstrap
                if ipar == 1:
                    BootRec[
                        "magic_method_codes"] = 'LP-AN:AE-H:AE-BS-P'  # parametric bootstrap
                if verbose:
                    print("Boostrap Statistics: ")
                    print(
                        " tau_i, V_i_D, V_i_I, V_i_zeta, V_i_zeta_D, V_i_zeta_I, V_i_eta, V_i_eta_D, V_i_eta_I"
                    )
                    print(BootRec["anisotropy_t1"],
                          BootRec["anisotropy_v1_dec"],
                          BootRec["anisotropy_v1_inc"],
                          BootRec["anisotropy_v1_eta_semi_angle"],
                          BootRec["anisotropy_v1_eta_dec"],
                          BootRec["anisotropy_v1_eta_inc"],
                          BootRec["anisotropy_v1_zeta_semi_angle"],
                          BootRec["anisotropy_v1_zeta_dec"],
                          BootRec["anisotropy_v1_zeta_inc"])
                    print(BootRec["anisotropy_t2"],
                          BootRec["anisotropy_v2_dec"],
                          BootRec["anisotropy_v2_inc"],
                          BootRec["anisotropy_v2_eta_semi_angle"],
                          BootRec["anisotropy_v2_eta_dec"],
                          BootRec["anisotropy_v2_eta_inc"],
                          BootRec["anisotropy_v2_zeta_semi_angle"],
                          BootRec["anisotropy_v2_zeta_dec"],
                          BootRec["anisotropy_v2_zeta_inc"])
                    print(BootRec["anisotropy_t3"],
                          BootRec["anisotropy_v3_dec"],
                          BootRec["anisotropy_v3_inc"],
                          BootRec["anisotropy_v3_eta_semi_angle"],
                          BootRec["anisotropy_v3_eta_dec"],
                          BootRec["anisotropy_v3_eta_inc"],
                          BootRec["anisotropy_v3_zeta_semi_angle"],
                          BootRec["anisotropy_v3_zeta_dec"],
                          BootRec["anisotropy_v3_zeta_inc"])
                BootRec['magic_software_packages'] = version_num
                ResRecs.append(BootRec)
            k += 1
            goon = 1
            while goon == 1 and iplot == 1 and verbose:
                if iboot == 1: print("compare with [d]irection ")
                print(
                    " plot [g]reat circle,  change [c]oord. system, change [e]llipse calculation,  s[a]ve plots, [q]uit "
                )
                if isite == 1:
                    print("  [p]revious, [s]ite, [q]uit, <return> for next ")
                ans = input("")
                if ans == "q":
                    sys.exit()
                if ans == "e":
                    iboot, ipar, ihext, ivec = 1, 0, 0, 0
                    e = input("Do Hext Statistics  1/[0]: ")
                    if e == "1": ihext = 1
                    e = input("Suppress bootstrap 1/[0]: ")
                    if e == "1": iboot = 0
                    if iboot == 1:
                        e = input("Parametric bootstrap 1/[0]: ")
                        if e == "1": ipar = 1
                        e = input("Plot bootstrap eigenvectors:  1/[0]: ")
                        if e == "1": ivec = 1
                        if iplot == 1:
                            if inittcdf == 0:
                                ANIS['tcdf'] = 3
                                pmagplotlib.plot_init(ANIS['tcdf'], 5, 5)
                                inittcdf = 1
                    bpars, hpars = pmagplotlib.plotANIS(
                        ANIS, Ss, iboot, ihext, ivec, ipar, title, iplot, comp,
                        vec, Dir, nb)
                    if verbose and plots == 0: pmagplotlib.drawFIGS(ANIS)
                if ans == "c":
                    print("Current Coordinate system is: ")
                    if CS == '-1': print(" Specimen")
                    if CS == '0': print(" Geographic")
                    if CS == '100': print(" Tilt corrected")
                    key = input(
                        " Enter desired coordinate system: [s]pecimen, [g]eographic, [t]ilt corrected "
                    )
                    if key == 's': CS = '-1'
                    if key == 'g': CS = '0'
                    if key == 't': CS = '100'
                    if CS not in orlist:
                        if len(orlist) > 0:
                            CS = orlist[0]
                        else:
                            CS = '-1'
                        if CS == '-1': crd = 's'
                        if CS == '0': crd = 'g'
                        if CS == '100': crd = 't'
                        print(
                            "desired coordinate system not available, using available: ",
                            crd)
                    k -= 1
                    goon = 0
                if ans == "":
                    if isite == 1:
                        goon = 0
                    else:
                        print("Good bye ")
                        sys.exit()
                if ans == 'd':
                    if initcdf == 0:
                        initcdf = 1
                        ANIS['vxcdf'], ANIS['vycdf'], ANIS['vzcdf'] = 4, 5, 6
                        pmagplotlib.plot_init(ANIS['vxcdf'], 5, 5)
                        pmagplotlib.plot_init(ANIS['vycdf'], 5, 5)
                        pmagplotlib.plot_init(ANIS['vzcdf'], 5, 5)
                    Dir, comp = [], 1
                    print("""
                      Input: Vi D I to  compare  eigenvector Vi with direction D/I
                             where Vi=1: principal
                                   Vi=2: major
                                   Vi=3: minor
                                   D= declination of comparison direction
                                   I= inclination of comparison direction""")
                    con = 1
                    while con == 1:
                        try:
                            vdi = input("Vi D I: ").split()
                            vec = int(vdi[0]) - 1
                            Dir = [float(vdi[1]), float(vdi[2])]
                            con = 0
                        except IndexError:
                            print(" Incorrect entry, try again ")
                    bpars, hpars = pmagplotlib.plotANIS(
                        ANIS, Ss, iboot, ihext, ivec, ipar, title, iplot, comp,
                        vec, Dir, nb)
                    Dir, comp = [], 0
                if ans == 'g':
                    con, cnt = 1, 0
                    while con == 1:
                        try:
                            print(
                                " Input:  input pole to great circle ( D I) to  plot a great circle:   "
                            )
                            di = input(" D I: ").split()
                            PDir.append(float(di[0]))
                            PDir.append(float(di[1]))
                            con = 0
                        except:
                            cnt += 1
                            if cnt < 10:
                                print(
                                    " enter the dec and inc of the pole on one line "
                                )
                            else:
                                print(
                                    "ummm - you are doing something wrong - i give up"
                                )
                                sys.exit()
                    pmagplotlib.plotC(ANIS['data'], PDir, 90., 'g')
                    pmagplotlib.plotC(ANIS['conf'], PDir, 90., 'g')
                    if verbose and plots == 0: pmagplotlib.drawFIGS(ANIS)
                if ans == "p":
                    k -= 2
                    goon = 0
                if ans == "q":
                    k = plt
                    goon = 0
                if ans == "s":
                    keepon = 1
                    site = input(" print site or part of site desired: ")
                    while keepon == 1:
                        try:
                            k = sitelist.index(site)
                            keepon = 0
                        except:
                            tmplist = []
                            for qq in range(len(sitelist)):
                                if site in sitelist[qq]:
                                    tmplist.append(sitelist[qq])
                            print(site, " not found, but this was: ")
                            print(tmplist)
                            site = input('Select one or try again\n ')
                            k = sitelist.index(site)
                    goon, ans = 0, ""
                if ans == "a":
                    locs = pmag.makelist(Locs)
                    if pmagplotlib.isServer:  # use server plot naming convention
                        title = "LO:_" + locs + '_SI:__' + '_SA:__SP:__CO:_' + crd
                    else:  # use more readable plot naming convention
                        title = "{}_{}".format(locs, crd)
                    save(ANIS, fmt, title)
                    goon = 0
        else:
            if verbose: print('skipping plot - not enough data points')
            k += 1
#   put rmag_results stuff here
    if len(ResRecs) > 0:
        ResOut, keylist = pmag.fillkeys(ResRecs)
        pmag.magic_write(outfile, ResOut, 'rmag_results')
    if verbose:
        print(" Good bye ")
Esempio n. 20
0
def main():
    """
    NAME
       revtest_MM1990.py

    DESCRIPTION
       calculates Watson's V statistic from input files through Monte Carlo simulation in order to test whether normal and reversed populations could have been drawn from a common mean (equivalent to watsonV.py). Also provides the critical angle between the two sample mean directions and the corresponding McFadden and McElhinny (1990) classification.

    INPUT FORMAT
       takes dec/inc as first two columns in two space delimited files (one file for normal directions, one file for reversed directions).

    SYNTAX
       revtest_MM1990.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f FILE
        -f2 FILE
        -P  (don't plot the Watson V cdf)

    OUTPUT
        Watson's V between the two populations and the Monte Carlo Critical Value Vc.
        M&M1990 angle, critical angle and classification
        Plot of Watson's V CDF from Monte Carlo simulation (red line), V is solid and Vc is dashed.

    """
    D1,D2=[],[]
    plot=1
    Flip=1
    if '-h' in sys.argv: # check if help is needed
        print(main.__doc__)
        sys.exit() # graceful quit
    if '-P' in  sys.argv: plot=0
    if '-f' in sys.argv:
        ind=sys.argv.index('-f')
        file1=sys.argv[ind+1]
    f1=open(file1,'r')
    for line in f1.readlines():
        rec=line.split()
        Dec,Inc=float(rec[0]),float(rec[1])
        D1.append([Dec,Inc,1.])
    f1.close()
    if '-f2' in sys.argv:
        ind=sys.argv.index('-f2')
        file2=sys.argv[ind+1]
        f2=open(file2,'r')
        print("be patient, your computer is doing 5000 simulations...")
        for line in f2.readlines():
            rec=line.split()
            Dec,Inc=float(rec[0]),float(rec[1])
            D2.append([Dec,Inc,1.])
        f2.close()
    #take the antipode for the directions in file 2
    D2_flip=[]
    for rec in D2:
        d,i=(rec[0]-180.)%360.,-rec[1]
        D2_flip.append([d,i,1.])

    pars_1=pmag.fisher_mean(D1)
    pars_2=pmag.fisher_mean(D2_flip)

    cart_1=pmag.dir2cart([pars_1["dec"],pars_1["inc"],pars_1["r"]])
    cart_2=pmag.dir2cart([pars_2['dec'],pars_2['inc'],pars_2["r"]])
    Sw=pars_1['k']*pars_1['r']+pars_2['k']*pars_2['r'] # k1*r1+k2*r2
    xhat_1=pars_1['k']*cart_1[0]+pars_2['k']*cart_2[0] # k1*x1+k2*x2
    xhat_2=pars_1['k']*cart_1[1]+pars_2['k']*cart_2[1] # k1*y1+k2*y2
    xhat_3=pars_1['k']*cart_1[2]+pars_2['k']*cart_2[2] # k1*z1+k2*z2
    Rw=numpy.sqrt(xhat_1**2+xhat_2**2+xhat_3**2)
    V=2*(Sw-Rw)
#
#keep weighted sum for later when determining the "critical angle" let's save it as Sr (notation of McFadden and McElhinny, 1990)
#
    Sr=Sw
#
# do monte carlo simulation of datasets with same kappas, but common mean
#
    counter,NumSims=0,5000
    Vp=[] # set of Vs from simulations
    for k in range(NumSims):
#
# get a set of N1 fisher distributed vectors with k1, calculate fisher stats
#
        Dirp=[]
        for i in range(pars_1["n"]):
            Dirp.append(pmag.fshdev(pars_1["k"]))
        pars_p1=pmag.fisher_mean(Dirp)
#
# get a set of N2 fisher distributed vectors with k2, calculate fisher stats
#
        Dirp=[]
        for i in range(pars_2["n"]):
            Dirp.append(pmag.fshdev(pars_2["k"]))
        pars_p2=pmag.fisher_mean(Dirp)
#
# get the V for these
#
        Vk=pmag.vfunc(pars_p1,pars_p2)
        Vp.append(Vk)
#
# sort the Vs, get Vcrit (95th percentile one)
#
    Vp.sort()
    k=int(.95*NumSims)
    Vcrit=Vp[k]
#
# equation 18 of McFadden and McElhinny, 1990 calculates the critical value of R (Rwc)
#
    Rwc=Sr-(old_div(Vcrit,2))
#
#following equation 19 of McFadden and McElhinny (1990) the critical angle is calculated.
#
    k1=pars_1['k']
    k2=pars_2['k']
    R1=pars_1['r']
    R2=pars_2['r']
    critical_angle=numpy.degrees(numpy.arccos(old_div(((Rwc**2)-((k1*R1)**2)-((k2*R2)**2)),(2*k1*R1*k2*R2))))
    D1_mean=(pars_1['dec'],pars_1['inc'])
    D2_mean=(pars_2['dec'],pars_2['inc'])
    angle=pmag.angle(D1_mean,D2_mean)
#
# print the results of the test
#
    print("")
    print("Results of Watson V test: ")
    print("")
    print("Watson's V:           " '%.1f' %(V))
    print("Critical value of V:  " '%.1f' %(Vcrit))

    if V<Vcrit:
        print('"Pass": Since V is less than Vcrit, the null hypothesis that the two populations are drawn from distributions that share a common mean direction (antipodal to one another) cannot be rejected.')
    elif V>Vcrit:
        print('"Fail": Since V is greater than Vcrit, the two means can be distinguished at the 95% confidence level.')
    print("")
    print("M&M1990 classification:")
    print("")
    print("Angle between data set means: " '%.1f'%(angle))
    print("Critical angle of M&M1990:   " '%.1f'%(critical_angle))

    if V>Vcrit:
        print("")
    elif V<Vcrit:
        if critical_angle<5:
            print("The McFadden and McElhinny (1990) classification for this test is: 'A'")
        elif critical_angle<10:
            print("The McFadden and McElhinny (1990) classification for this test is: 'B'")
        elif critical_angle<20:
            print("The McFadden and McElhinny (1990) classification for this test is: 'C'")
        else:
            print("The McFadden and McElhinny (1990) classification for this test is: 'INDETERMINATE;")
    if plot==1:
        CDF={'cdf':1}
        pmagplotlib.plot_init(CDF['cdf'],5,5)
        p1 = pmagplotlib.plotCDF(CDF['cdf'],Vp,"Watson's V",'r',"")
        p2 = pmagplotlib.plotVs(CDF['cdf'],[V],'g','-')
        p3 = pmagplotlib.plotVs(CDF['cdf'],[Vp[k]],'b','--')
        pmagplotlib.drawFIGS(CDF)
        files,fmt={},'svg'
        if file2!="":
            files['cdf']='WatsonsV_'+file1+'_'+file2+'.'+fmt
        else:
            files['cdf']='WatsonsV_'+file1+'.'+fmt
        if pmagplotlib.isServer:
            black     = '#000000'
            purple    = '#800080'
            titles={}
            titles['cdf']='Cumulative Distribution'
            CDF = pmagplotlib.addBorders(CDF,titles,black,purple)
            pmagplotlib.saveP(CDF,files)
        else:
            ans=input(" S[a]ve to save plot, [q]uit without saving:  ")
            if ans=="a": pmagplotlib.saveP(CDF,files)
Esempio n. 21
0
def main():
    """
    NAME
       plotdi_e.py

    DESCRIPTION
       plots equal area projection  from dec inc data and cones of confidence 
           (Fisher, kent or Bingham or bootstrap).

    INPUT FORMAT
       takes dec/inc as first two columns in space delimited file

    SYNTAX
       plotdi_e.py [command line options]

    OPTIONS
        -h prints help message and quits
        -i for interactive parameter entry
        -f FILE, sets input filename on command line 
        -Fish plots unit vector mean direction, alpha95
        -Bing plots Principal direction, Bingham confidence ellipse
        -Kent plots unit vector mean direction, confidence ellipse
        -Boot E plots unit vector mean direction, bootstrapped confidence ellipse
        -Boot V plots  unit vector mean direction, distribution of bootstrapped means

    """
    dist='F' # default distribution is Fisherian
    mode=1
    EQ={'eq':1}
    if len(sys.argv) > 0:
        if '-h' in sys.argv: # check if help is needed
            print main.__doc__
            sys.exit() # graceful quit
        if '-i' in sys.argv: # ask for filename
            file=raw_input("Enter file name with dec, inc data: ")
            dist=raw_input("Enter desired distrubution: [Fish]er, [Bing]ham, [Kent] [Boot] [default is Fisher]: ")
            if dist=="":dist="F"
            if dist=="Boot":
                 type=raw_input(" Ellipses or distribution of vectors? [E]/V ")
                 if type=="" or type=="E":
                     dist="BE"
                 else:
                     dist="BE"
        else:
#
            if '-f' in sys.argv:
                ind=sys.argv.index('-f')
                file=sys.argv[ind+1]
            else:
                print 'you must specify a file name'
                print main.__doc__
                sys.exit()
            if '-Bing' in sys.argv:dist='B'
            if '-Kent' in sys.argv:dist='K'
            if '-Boot' in sys.argv:
                ind=sys.argv.index('-Boot')
                type=sys.argv[ind+1]
                if type=='E': 
                    dist='BE'
                elif type=='V': 
                    dist='BV'
                    EQ['bdirs']=2
                    pmagplotlib.plot_init(EQ['bdirs'],5,5)
                else:
                    print main.__doc__
                    sys.exit()
    pmagplotlib.plot_init(EQ['eq'],5,5)
#
# get to work
    f=open(file,'r')
    data=f.readlines()
#
    DIs= [] # set up list for dec inc data
    DiRecs=[]
    pars=[]
    nDIs,rDIs,npars,rpars=[],[],[],[]
    mode =1
    for line in data:   # read in the data from standard input
        DiRec={}
        rec=line.split() # split each line on space to get records
        DIs.append((float(rec[0]),float(rec[1]),1.))
        DiRec['dec']=rec[0]
        DiRec['inc']=rec[1]
        DiRec['direction_type']='l'
        DiRecs.append(DiRec)
    # split into two modes
    ppars=pmag.doprinc(DIs) # get principal directions
    for rec in DIs:
        angle=pmag.angle([rec[0],rec[1]],[ppars['dec'],ppars['inc']])
        if angle>90.:
            rDIs.append(rec)
        else:
            nDIs.append(rec)
    if dist=='B': # do on whole dataset
        title="Bingham confidence ellipse"
        bpars=pmag.dobingham(DIs)
        for key in bpars.keys():
            if key!='n':print "    ",key, '%7.1f'%(bpars[key])
            if key=='n':print "    ",key, '       %i'%(bpars[key])
        npars.append(bpars['dec']) 
        npars.append(bpars['inc'])
        npars.append(bpars['Zeta']) 
        npars.append(bpars['Zdec']) 
        npars.append(bpars['Zinc'])
        npars.append(bpars['Eta']) 
        npars.append(bpars['Edec']) 
        npars.append(bpars['Einc'])
    if dist=='F':
        title="Fisher confidence cone"
        if len(nDIs)>3:
            fpars=pmag.fisher_mean(nDIs)
            print "mode ",mode
            for key in fpars.keys():
                if key!='n':print "    ",key, '%7.1f'%(fpars[key])
                if key=='n':print "    ",key, '       %i'%(fpars[key])
            mode+=1
            npars.append(fpars['dec']) 
            npars.append(fpars['inc'])
            npars.append(fpars['alpha95']) # Beta
            npars.append(fpars['dec']) 
            isign=abs(fpars['inc'])/fpars['inc'] 
            npars.append(fpars['inc']-isign*90.) #Beta inc
            npars.append(fpars['alpha95']) # gamma 
            npars.append(fpars['dec']+90.) # Beta dec
            npars.append(0.) #Beta inc
        if len(rDIs)>3:
            fpars=pmag.fisher_mean(rDIs)
            print "mode ",mode
            for key in fpars.keys():
                if key!='n':print "    ",key, '%7.1f'%(fpars[key])
                if key=='n':print "    ",key, '       %i'%(fpars[key])
            mode+=1
            rpars.append(fpars['dec']) 
            rpars.append(fpars['inc'])
            rpars.append(fpars['alpha95']) # Beta
            rpars.append(fpars['dec']) 
            isign=abs(fpars['inc'])/fpars['inc'] 
            rpars.append(fpars['inc']-isign*90.) #Beta inc
            rpars.append(fpars['alpha95']) # gamma 
            rpars.append(fpars['dec']+90.) # Beta dec
            rpars.append(0.) #Beta inc
    if dist=='K':
        title="Kent confidence ellipse"
        if len(nDIs)>3:
            kpars=pmag.dokent(nDIs,len(nDIs))
            print "mode ",mode
            for key in kpars.keys():
                if key!='n':print "    ",key, '%7.1f'%(kpars[key])
                if key=='n':print "    ",key, '       %i'%(kpars[key])
            mode+=1
            npars.append(kpars['dec']) 
            npars.append(kpars['inc'])
            npars.append(kpars['Zeta']) 
            npars.append(kpars['Zdec']) 
            npars.append(kpars['Zinc'])
            npars.append(kpars['Eta']) 
            npars.append(kpars['Edec']) 
            npars.append(kpars['Einc'])
        if len(rDIs)>3:
            kpars=pmag.dokent(rDIs,len(rDIs))
            print "mode ",mode
            for key in kpars.keys():
                if key!='n':print "    ",key, '%7.1f'%(kpars[key])
                if key=='n':print "    ",key, '       %i'%(kpars[key])
            mode+=1
            rpars.append(kpars['dec']) 
            rpars.append(kpars['inc'])
            rpars.append(kpars['Zeta']) 
            rpars.append(kpars['Zdec']) 
            rpars.append(kpars['Zinc'])
            rpars.append(kpars['Eta']) 
            rpars.append(kpars['Edec']) 
            rpars.append(kpars['Einc'])
    else: # assume bootstrap
        if dist=='BE':
            if len(nDIs)>5:
                BnDIs=pmag.di_boot(nDIs)
                Bkpars=pmag.dokent(BnDIs,1.)
                print "mode ",mode
                for key in Bkpars.keys():
                    if key!='n':print "    ",key, '%7.1f'%(Bkpars[key])
                    if key=='n':print "    ",key, '       %i'%(Bkpars[key])
                mode+=1
                npars.append(Bkpars['dec']) 
                npars.append(Bkpars['inc'])
                npars.append(Bkpars['Zeta']) 
                npars.append(Bkpars['Zdec']) 
                npars.append(Bkpars['Zinc'])
                npars.append(Bkpars['Eta']) 
                npars.append(Bkpars['Edec']) 
                npars.append(Bkpars['Einc'])
            if len(rDIs)>5:
                BrDIs=pmag.di_boot(rDIs)
                Bkpars=pmag.dokent(BrDIs,1.)
                print "mode ",mode
                for key in Bkpars.keys():
                    if key!='n':print "    ",key, '%7.1f'%(Bkpars[key])
                    if key=='n':print "    ",key, '       %i'%(Bkpars[key])
                mode+=1
                rpars.append(Bkpars['dec']) 
                rpars.append(Bkpars['inc'])
                rpars.append(Bkpars['Zeta']) 
                rpars.append(Bkpars['Zdec']) 
                rpars.append(Bkpars['Zinc'])
                rpars.append(Bkpars['Eta']) 
                rpars.append(Bkpars['Edec']) 
                rpars.append(Bkpars['Einc'])
            title="Bootstrapped confidence ellipse"
        elif dist=='BV':
            if len(nDIs)>5:
                pmagplotlib.plotEQ(EQ['eq'],nDIs,'Data')
                BnDIs=pmag.di_boot(nDIs)
                pmagplotlib.plotEQ(EQ['bdirs'],BnDIs,'Bootstrapped Eigenvectors')
            if len(rDIs)>5:
                BrDIs=pmag.di_boot(rDIs)
                if len(nDIs)>5:  # plot on existing plots
                    pmagplotlib.plotDI(EQ['eq'],rDIs)
                    pmagplotlib.plotDI(EQ['bdirs'],BrDIs)
                else:
                    pmagplotlib.plotEQ(EQ['eq'],rDIs,'Data')
                    pmagplotlib.plotEQ(EQ['bdirs'],BrDIs,'Bootstrapped Eigenvectors')
            pmagplotlib.drawFIGS(EQ)
            ans=raw_input('s[a]ve, [q]uit ')
            if ans=='q':sys.exit()
            if ans=='a':
                files={}
                for key in EQ.keys():
                    files[key]='BE_'+key+'.svg'
                pmagplotlib.saveP(EQ,files)
            sys.exit() 
    if len(nDIs)>5:
        pmagplotlib.plotCONF(EQ['eq'],title,DiRecs,npars,1)
        if len(rDIs)>5 and dist!='B': 
            pmagplotlib.plotCONF(EQ['eq'],title,[],rpars,0)
    elif len(rDIs)>5 and dist!='B': 
        pmagplotlib.plotCONF(EQ['eq'],title,DiRecs,rpars,1)
    pmagplotlib.drawFIGS(EQ)
    ans=raw_input('s[a]ve, [q]uit ')
    if ans=='q':sys.exit()
    if ans=='a':
        files={}
        for key in EQ.keys():
            files[key]=key+'.svg'
        pmagplotlib.saveP(EQ,files)
Esempio n. 22
0
def main():
    """
    NAME
        dayplot_magic.py

    DESCRIPTION
        makes 'day plots' (Day et al. 1977) and squareness/coercivity,
        plots 'linear mixing' curve from Dunlop and Carter-Stiglitz (2006).
          squareness coercivity of remanence (Neel, 1955) plots after
          Tauxe et al. (2002)

    SYNTAX
        dayplot_magic.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f: specify input hysteresis file, default is rmag_hysteresis.txt
        -fr: specify input remanence file, default is rmag_remanence.txt
        -fmt [svg,png,jpg] format for output plots
        -sav saves plots and quits quietly
        -n label specimen names
    """
    args=sys.argv
    hyst_file,rem_file="rmag_hysteresis.txt","rmag_remanence.txt"
    dir_path='.'
    verbose=pmagplotlib.verbose
    fmt='svg' # default file format
    if '-WD' in args:
       ind=args.index('-WD')
       dir_path=args[ind+1]
    if "-h" in args:
        print(main.__doc__)
        sys.exit()
    if '-f' in args:
        ind=args.index("-f")
        hyst_file=args[ind+1]
    if '-fr' in args:
        ind=args.index("-fr")
        rem_file=args[ind+1]
    if '-fmt' in sys.argv:
        ind=sys.argv.index("-fmt")
        fmt=sys.argv[ind+1]
    if '-sav' in sys.argv:
        plots=1
        verbose=0
    else: plots=0
    if '-n' in sys.argv: 
        label=1
    else:
        label=0
    hyst_file = os.path.realpath(os.path.join(dir_path, hyst_file))
    rem_file = os.path.realpath(os.path.join(dir_path, rem_file))
    #
    # initialize some variables
    # define figure numbers for Day,S-Bc,S-Bcr
    DSC={}
    DSC['day'],DSC['S-Bc'],DSC['S-Bcr'],DSC['bcr1-bcr2']=1,2,3,4
    pmagplotlib.plot_init(DSC['day'],5,5)
    pmagplotlib.plot_init(DSC['S-Bc'],5,5)
    pmagplotlib.plot_init(DSC['S-Bcr'],5,5)
    pmagplotlib.plot_init(DSC['bcr1-bcr2'],5,5)
    #
    #
    hyst_data,file_type=pmag.magic_read(hyst_file)
    rem_data,file_type=pmag.magic_read(rem_file)
    #
    S,BcrBc,Bcr2,Bc,hsids,Bcr=[],[],[],[],[],[]
    Ms,Bcr1,Bcr1Bc,S1=[],[],[],[]
    names=[]
    locations=''
    for rec in  hyst_data:
        if 'er_location_name' in rec.keys() and rec['er_location_name'] not in locations: locations=locations+rec['er_location_name']+'_'
        if rec['hysteresis_bcr'] !="" and rec['hysteresis_mr_moment']!="":
            S.append(float(rec['hysteresis_mr_moment'])/float(rec['hysteresis_ms_moment']))
            Bcr.append(float(rec['hysteresis_bcr']))
            Bc.append(float(rec['hysteresis_bc']))
            BcrBc.append(Bcr[-1]/Bc[-1])
            if 'er_synthetic_name' in rec.keys() and rec['er_synthetic_name']!="":
                rec['er_specimen_name']=rec['er_synthetic_name']
            hsids.append(rec['er_specimen_name'])
            names.append(rec['er_specimen_name'])
    if len(rem_data)>0:
        for rec in  rem_data:
            if rec['remanence_bcr'] !="" and float(rec['remanence_bcr'])>0:
                try:
                    ind=hsids.index(rec['er_specimen_name'])
                    Bcr1.append(float(rec['remanence_bcr']))
                    Bcr1Bc.append(Bcr1[-1]/Bc[ind])
                    S1.append(S[ind])
                    Bcr2.append(Bcr[ind])
                except ValueError:
                    if verbose:print('hysteresis data for ',rec['er_specimen_name'],' not found')
    #
    # now plot the day and S-Bc, S-Bcr plots
    #
    leglist=[]
    if label==0:names=[]
    if len(Bcr1)>0:
        pmagplotlib.plotDay(DSC['day'],Bcr1Bc,S1,'ro',names=names)
        pmagplotlib.plotSBcr(DSC['S-Bcr'],Bcr1,S1,'ro')
        pmagplotlib.plot_init(DSC['bcr1-bcr2'],5,5)
        pmagplotlib.plotBcr(DSC['bcr1-bcr2'],Bcr1,Bcr2)
    else:
        del DSC['bcr1-bcr2']
    pmagplotlib.plotDay(DSC['day'],BcrBc,S,'bs',names=names)
    pmagplotlib.plotSBcr(DSC['S-Bcr'],Bcr,S,'bs')
    pmagplotlib.plotSBc(DSC['S-Bc'],Bc,S,'bs')
    files={}
    if len(locations)>0:locations=locations[:-1]
    for key in DSC.keys():
        if pmagplotlib.isServer: # use server plot naming convention
            files[key] = 'LO:_'+locations+'_'+'SI:__SA:__SP:__TY:_'+key+'_.'+fmt
        else:  # use more readable plot naming convention
            files[key] = '{}_{}.{}'.format(locations, key, fmt)
    if verbose:
        pmagplotlib.drawFIGS(DSC)
        ans=raw_input(" S[a]ve to save plots, return to quit:  ")
        if ans=="a":
            pmagplotlib.saveP(DSC,files)
        else: sys.exit()
    if plots:  pmagplotlib.saveP(DSC,files)
Esempio n. 23
0
def main():
    """
    NAME
        biplot_magic.py

    DESCRIPTION
        makes a biplot of specified variables from magic_measurements.txt format file
  
    SYNTAX
        biplot_magic.py [-h] [-i] [command line options]

    INPUT 
        takes magic formated magic_measurments file

    OPTIONS
        -h prints help message and quits
        -i interactively set filename and axes for plotting
        -f FILE: specifies file name, default: magic_measurements.txt
        -fmt [svg,png,jpg], format for images - default is svg
        -sav figure and quit
        -x XMETH:key:step, specify method code for X axis (optional key and treatment values)
        -y YMETH:key:step, specify method code for X axis
        -obj OBJ: specify object [loc, sit, sam, spc] for plot, default is whole file
        -n [V,M] plot volume or mass normalized data only
    NOTES
        if nothing is specified for x and y, the user will be presented with options
        key = ['treatment_ac_field','treatment_dc_field',treatment_temp'] 
        step in mT for fields, K for temperatures
           """ 
    #
    file='magic_measurements.txt'
    methx,methy,fmt="","",'.svg'
    plot_key=''
    norm_by=""
    #plot=0
    no_plot = pmag.get_flag_arg_from_sys('-sav')
    if not no_plot:
        do_plot = True
    else:
        do_plot = False
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-f' in sys.argv:
        ind=sys.argv.index('-f')
        file=sys.argv[ind+1]
    if '-fmt' in sys.argv:
        ind=sys.argv.index('-fmt')
        fmt='.'+sys.argv[ind+1]
    if '-n' in sys.argv:
        ind=sys.argv.index('-n')
        norm_by=sys.argv[ind+1]
    xtreat_key,ytreat_key,xstep,ystep="","","",""
    if '-x' in sys.argv:
        ind=sys.argv.index('-x')
        meths=sys.argv[ind+1].split(':')
        methx=meths[0]
        if len(meths)>1:
            xtreat_key=meths[1]
            xstep=float(meths[2])
    if '-y' in sys.argv:
        ind=sys.argv.index('-y')
        meths=sys.argv[ind+1].split(':')
        methy=meths[0]
        if len(meths)>1:
            ytreat_key=meths[1]
            ystep=float(meths[2])
    if '-obj' in sys.argv: 
        ind=sys.argv.index('-obj')
        plot_by=sys.argv[ind+1]
        if plot_by=='loc':plot_key='er_location_name'
        if plot_by=='sit':plot_key='er_site_name'
        if plot_by=='sam':plot_key='er_sample_name'
        if plot_by=='spc':plot_key='er_specimen_name'
    if '-h' in sys.argv:
        do_plot = False
    if '-i' in sys.argv: 
    #
    # get name of file from command line
    #
        file=raw_input("Input magic_measurments file name? [magic_measurements.txt] ")
        if file=="":file="magic_measurements.txt"
    #
    #
    FIG={'fig':1}
    pmagplotlib.plot_init(FIG['fig'],5,5)
    data,file_type=pmag.magic_read(file)
    if file_type!="magic_measurements":
        print file_type,' not correct format for magic_measurments file'
        sys.exit()
    #
    # collect method codes
    methods,plotlist=[],[]
    for rec in  data:
        if plot_key!="":
            if rec[plot_key] not in plotlist:plotlist.append(rec[plot_key])
        elif len(plotlist)==0:
            plotlist.append('All')
        meths=rec['magic_method_codes'].split(':')
        for meth in meths:
            if meth.strip() not in methods and meth.strip()!="LP-":
                methods.append(meth.strip())
    #
    if '-i' in sys.argv:
        print methods
    elif methx =="" or methy=="": 
	print methods
        sys.exit()
    GoOn=1
    while GoOn==1:
        if '-i' in sys.argv:methx=raw_input('Select method for x axis: ')
        if methx not in methods:
            if '-i' in sys.argv:
                print 'try again! method not available'
            else: 
                print main.__doc__
                print '\n must specify X axis method\n'
                sys.exit()
        else:
            if pmagplotlib.verbose: print methx, ' selected for X axis'
            GoOn=0
    GoOn=1
    while GoOn==1:
        if '-i' in sys.argv:methy=raw_input('Select method for y axis: ')
        if methy not in methods:
            if '-i' in sys.argv:
                print 'try again! method not available'
            else: 
                print main.__doc__
                print '\n must specify Y axis method\n'
                sys.exit()
        else:
            if pmagplotlib.verbose: print methy, ' selected for Y axis'
            GoOn=0
    if norm_by=="":
        measkeys=['measurement_magn_mass','measurement_magn_volume','measurement_magn_moment','measurement_magnitude','measurement_chi_volume','measurement_chi_mass','measurement_chi']
    elif norm_by=="V":
        measkeys=['measurement_magn_volume','measurement_chi_volume']
    elif norm_by=="M":
        measkeys=['measurement_magn_mass','measurement_chi_mass']
    xmeaskey,ymeaskey="",""
    plotlist.sort()
    for plot in plotlist: # go through objects
        if pmagplotlib.verbose:
            print plot
        X,Y=[],[]
        x,y='',''
        for rec in data:
            if plot_key!="" and rec[plot_key]!=plot:
                pass
            else:
                meths=rec['magic_method_codes'].split(':')
                for meth in meths:
                    if meth.strip()==methx:
                        if xmeaskey=="":
                            for key in measkeys:
                                if key in rec.keys() and rec[key]!="":
                                    xmeaskey=key
                                    if pmagplotlib.verbose:
                                        print xmeaskey,' being used for plotting X.'
                                    break 
                    if meth.strip()==methy:
                        if ymeaskey=="":
                            for key in measkeys:
                                if key in rec.keys() and rec[key]!="":
                                    ymeaskey=key
                                    if pmagplotlib.verbose:
                                        print ymeaskey,' being used for plotting Y'
                                    break 
        if ymeaskey!="" and xmeaskey!="":
            for rec in data:
                x,y='',''
                spec=rec['er_specimen_name'] # get the ydata for this specimen
                if rec[ymeaskey]!="" and methy in rec['magic_method_codes'].split(':'): 
                    if ytreat_key=="" or (ytreat_key in rec.keys() and float(rec[ytreat_key])==ystep):
                        y=float(rec[ymeaskey])
                        for rec in data: # now find the xdata 
                            if rec['er_specimen_name']==spec and rec[xmeaskey]!="" and methx in rec['magic_method_codes'].split(':'): 
                                if xtreat_key=="" or (xtreat_key in rec.keys() and float(rec[xtreat_key])==xstep):
                                    x=float(rec[xmeaskey])
                if x != '' and y!= '':
                    X.append(x)
                    Y.append(y)
        if len(X)>0:
            pmagplotlib.clearFIG(FIG['fig'])
            pmagplotlib.plotXY(FIG['fig'],X,Y,sym='ro',xlab=methx,ylab=methy,title=plot+':Biplot')
            if not pmagplotlib.isServer and do_plot:
                pmagplotlib.drawFIGS(FIG)
                ans=raw_input('S[a]ve plots, [q]uit,  Return for next plot ' )
                if ans=='a':
                    files={}
                    for key in FIG.keys(): files[key]=plot+'_'+key+fmt
                    pmagplotlib.saveP(FIG,files)
                if ans=='q':
                    print "Good-bye\n"
                    sys.exit()
            else:
                files={}
                for key in FIG.keys(): files[key]=plot+'_'+key+fmt
                if pmagplotlib.isServer:
                    black     = '#000000'
                    purple    = '#800080'
                    titles={}
                    titles['fig']='X Y Plot'
                    FIG = pmagplotlib.addBorders(FIG,titles,black,purple)
                pmagplotlib.saveP(FIG,files)
        else:
            print 'nothing to plot for ',plot
Esempio n. 24
0
def main():
    """
    NAME
       eqarea.py

    DESCRIPTION
       makes equal area projections from declination/inclination data

    INPUT FORMAT
       takes dec/inc as first two columns in space delimited file
   
    SYNTAX
       eqarea.py [options]

    OPTIONS
        -f FILE, specify file on command line 
        -sav save figure and quit
        -fmt [svg,jpg,png,pdf] set figure format [default is svg]
        -s  SIZE specify symbol size - default is 20
        -Lsym  SHAPE  COLOR specify shape and color for lower hemisphere
        -Usym  SHAPE  COLOR specify shape and color for upper hemisphere
          shapes:  's': square,'o': circle,'^,>,v,<': [up,right,down,left] triangle, 'd': diamond, 
                   'p': pentagram, 'h': hexagon, '8': octagon, '+': plus, 'x': cross
          colors:  [b]lue,[g]reen,[r]ed,[c]yan,[m]agenta,[y]ellow,blac[k],[w]hite

    """
    title=""
    files,fmt={},'svg'
    sym={'lower':['o','r'],'upper':['o','w']}
    plot=0
    if '-h' in sys.argv: # check if help is needed
        print main.__doc__
        sys.exit() # graceful quit
    if '-sav' in sys.argv: plot=1
    if '-fmt'  in sys.argv:
        ind=sys.argv.index('-fmt')
        fmt=sys.argv[ind+1] 
    if '-s'  in sys.argv:
        ind=sys.argv.index('-s')
        sym['size']=int(sys.argv[ind+1])
    else:
        sym['size']=20
    if '-Lsym'  in sys.argv:
        ind=sys.argv.index('-Lsym')
        sym['lower'][0]=sys.argv[ind+1] 
        sym['lower'][1]=sys.argv[ind+2] 
    if '-Usym'  in sys.argv:
        ind=sys.argv.index('-Usym')
        sym['upper'][0]=sys.argv[ind+1] 
        sym['upper'][1]=sys.argv[ind+2] 
    if '-f' in sys.argv: # ask for filename
        ind=sys.argv.index('-f')
        file=sys.argv[ind+1]
    else: 
        print main.__doc__
        print ' \n   -f option required'
        sys.exit() # graceful quit
    DI=numpy.loadtxt(file)
    EQ={'eq':1}
    pmagplotlib.plot_init(EQ['eq'],5,5)
    pmagplotlib.plotEQsym(EQ['eq'],DI,'Equal Area Plot',sym) # make plot
    if plot==0:pmagplotlib.drawFIGS(EQ) # make it visible
    for key in EQ.keys():
        files[key]=key+'.'+fmt 
    if pmagplotlib.isServer:
        black     = '#000000'
        purple    = '#800080'
        titles={}
        titles['eq']='Equal Area Plot'
        EQ = pmagplotlib.addBorders(EQ,titles,black,purple)
        pmagplotlib.saveP(EQ,files)
    elif plot==1:
        files['eq']=file+'.'+fmt 
        pmagplotlib.saveP(EQ,files)
    else:
        ans=raw_input(" S[a]ve to save plot, [q]uit without saving:  ")
        if ans=="a": pmagplotlib.saveP(EQ,files)
Esempio n. 25
0
def main():
    """
    NAME
        dayplot_magic.py

    DESCRIPTION
        makes 'day plots' (Day et al. 1977) and squareness/coercivity,
        plots 'linear mixing' curve from Dunlop and Carter-Stiglitz (2006).
          squareness coercivity of remanence (Neel, 1955) plots after
          Tauxe et al. (2002)

    SYNTAX
        dayplot_magic.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f: specify input hysteresis file, default is specimens.txt
        -fmt [svg,png,jpg] format for output plots
        -sav saves plots and quits quietly
    """
    args = sys.argv
    if "-h" in args:
        print(main.__doc__)
        sys.exit()
    verbose = pmagplotlib.verbose
    dir_path = pmag.get_named_arg_from_sys('-WD', '.')
    fmt = pmag.get_named_arg_from_sys('-fmt', 'svg')
    if '-sav' in sys.argv:
        plots = 1
        verbose = False
    else:
        plots = 0
    infile = pmag.get_named_arg_from_sys("-f", "specimens.txt")
    fnames = {'specimens': infile}
    con = nb.Contribution(dir_path, read_tables=['specimens'],
                          custom_filenames=fnames)
    spec_container = con.tables['specimens']
    spec_df = spec_container.df

    #
    # initialize some variables
    # define figure numbers for Day,S-Bc,S-Bcr
    DSC = {}
    DSC['day'], DSC['S-Bc'], DSC['S-Bcr'], DSC['bcr1-bcr2'] = 1, 2, 3, 4
    pmagplotlib.plot_init(DSC['day'], 5, 5)
    pmagplotlib.plot_init(DSC['S-Bc'], 5, 5)
    pmagplotlib.plot_init(DSC['S-Bcr'], 5, 5)
    pmagplotlib.plot_init(DSC['bcr1-bcr2'], 5, 5)
    S, BcrBc, Bcr2, Bc, hsids, Bcr = [], [], [], [], [], []
    Bcr1, Bcr1Bc, S1 = [], [], []
    locations = ''

    if 'location' in spec_df.columns:
        locations = spec_df['location'].unique()
    do_rem = bool('rem_bcr' in spec_df.columns)

    for ind, row in spec_df.iterrows():
        if row['hyst_bcr'] and row['hyst_mr_moment']:
            S.append(old_div(float(row['hyst_mr_moment']), float(row['hyst_ms_moment'])))
            Bcr.append(float(row['hyst_bcr']))
            Bc.append(float(row['hyst_bc']))
            BcrBc.append(old_div(Bcr[-1], Bc[-1]))
            hsids.append(row['specimen'])
        if do_rem:
            if row['rem_bcr'] and float(row['rem_bcr']) > 0:
                try:
                    Bcr1.append(float(row['rem_bcr']))
                    Bcr1Bc.append(old_div(Bcr1[-1], Bc[-1]))
                    S1.append(S[-1])
                    Bcr2.append(Bcr[-1])
                except ValueError:
                    if verbose:
                        print('hysteresis data for ', row['specimen'], end=' ')
                        print(' not found')

    #
    # now plot the day and S-Bc, S-Bcr plots
    #
    if len(Bcr1) > 0:
        pmagplotlib.plotDay(DSC['day'], Bcr1Bc, S1, 'ro')
        pmagplotlib.plotSBcr(DSC['S-Bcr'], Bcr1, S1, 'ro')
        pmagplotlib.plot_init(DSC['bcr1-bcr2'], 5, 5)
        pmagplotlib.plotBcr(DSC['bcr1-bcr2'], Bcr1, Bcr2)
    else:
        del DSC['bcr1-bcr2']
    pmagplotlib.plotDay(DSC['day'], BcrBc, S, 'bs')
    pmagplotlib.plotSBcr(DSC['S-Bcr'], Bcr, S, 'bs')
    pmagplotlib.plotSBc(DSC['S-Bc'], Bc, S, 'bs')
    files = {}
    if len(locations) > 0:
        locations = locations[:-1]
    for key in list(DSC.keys()):
        if pmagplotlib.isServer: # use server plot naming convention
            files[key] = 'LO:_' + locations + '_' + 'SI:__SA:__SP:__TY:_' + key + '_.' + fmt
        else: # use more readable plot naming convention
            files[key] = '{}_{}.{}'.format(locations, key, fmt)
    if verbose:
        pmagplotlib.drawFIGS(DSC)
        ans = input(" S[a]ve to save plots, return to quit:  ")
        if ans == "a":
            pmagplotlib.saveP(DSC, files)
        else:
            sys.exit()
    if plots:
        pmagplotlib.saveP(DSC, files)
Esempio n. 26
0
def main():
    """
    NAME
        eqarea_magic.py

    DESCRIPTION
       makes equal area projections from declination/inclination data

    SYNTAX
        eqarea_magic.py [command line options]

    INPUT
       takes magic formatted sites, samples, specimens, or measurements

    OPTIONS
        -h prints help message and quits
        -f FILE: specify input magic format file from magic, default='sites.txt'
         supported types=[measurements, specimens, samples, sites]
        -fsp FILE: specify specimen file name, (required if you want to plot measurements by sample)
                default='specimens.txt'
        -fsa FILE: specify sample file name, (required if you want to plot specimens by site)
                default='samples.txt'
        -fsi FILE: specify site file name, default='sites.txt'

        -obj OBJ: specify  level of plot  [all, sit, sam, spc], default is all
        -crd [s,g,t]: specify coordinate system, [s]pecimen, [g]eographic, [t]ilt adjusted
                default is geographic, unspecified assumed geographic
        -fmt [svg,png,jpg] format for output plots
        -ell [F,K,B,Be,Bv] plot Fisher, Kent, Bingham, Bootstrap ellipses or Boostrap eigenvectors
        -c plot as colour contour
        -sav save plot and quit quietly
    NOTE
        all: entire file; sit: site; sam: sample; spc: specimen
    """
    # initialize some default variables
    FIG = {} # plot dictionary
    FIG['eqarea'] = 1 # eqarea is figure 1
    plotE = 0
    plt = 0  # default to not plotting
    verbose = pmagplotlib.verbose
    # extract arguments from sys.argv
    if '-h' in sys.argv:
        print(main.__doc__)
        sys.exit()
    dir_path = pmag.get_named_arg_from_sys("-WD", default_val=".")
    pmagplotlib.plot_init(FIG['eqarea'],5,5)
    in_file = pmag.get_named_arg_from_sys("-f", default_val="sites.txt")
    in_file = pmag.resolve_file_name(in_file, dir_path)
    if "-WD" not in sys.argv:
        dir_path = os.path.split(in_file)[0]
    #full_in_file = os.path.join(dir_path, in_file)
    plot_by = pmag.get_named_arg_from_sys("-obj", default_val="all").lower()
    spec_file = pmag.get_named_arg_from_sys("-fsp", default_val="specimens.txt")
    samp_file = pmag.get_named_arg_from_sys("-fsa", default_val="samples.txt")
    site_file = pmag.get_named_arg_from_sys("-fsi", default_val="sites.txt")
    if plot_by == 'all':
        plot_key = 'all'
    elif plot_by == 'sit':
        plot_key = 'site'
    elif plot_by == 'sam':
        plot_key = 'sample'
    elif plot_by == 'spc':
        plot_key = 'specimen'
    else:
        plot_by = 'all'
        plot_key = 'all'
    if '-c' in sys.argv:
        contour = 1
    else:
        contour = 0
    if '-sav' in sys.argv:
        plt = 1
        verbose = 0
    if '-ell' in sys.argv:
        plotE = 1
        ind = sys.argv.index('-ell')
        ell_type = sys.argv[ind+1]
        ell_type = pmag.get_named_arg_from_sys("-ell", "F")
        dist = ell_type.upper()
        # if dist type is unrecognized, use Fisher
        if dist not in ['F', 'K', 'B', 'BE', 'BV']:
            dist = 'F'
        if dist == "BV":
            FIG['bdirs'] = 2
            pmagplotlib.plot_init(FIG['bdirs'],5,5)
    crd = pmag.get_named_arg_from_sys("-crd", default_val="g")
    if crd == "s":
        coord = "-1"
    elif crd == "t":
        coord = "100"
    else:
        coord = "0"

    fmt = pmag.get_named_arg_from_sys("-fmt", "svg")

    dec_key = 'dir_dec'
    inc_key = 'dir_inc'
    tilt_key = 'dir_tilt_correction'
    #Dir_type_keys=['','site_direction_type','sample_direction_type','specimen_direction_type']

    #
    fnames = {"specimens": spec_file, "samples": samp_file, 'sites': site_file}
    contribution = nb.Contribution(dir_path, custom_filenames=fnames,
                                   single_file=in_file)

    try:
        contribution.propagate_location_to_samples()
        contribution.propagate_location_to_specimens()
        contribution.propagate_location_to_measurements()
    except KeyError as ex:
        pass

    # the object that contains the DataFrame + useful helper methods:
    table_name = list(contribution.tables.keys())[0]
    data_container = contribution.tables[table_name]
    # the actual DataFrame:
    data = data_container.df

    if plot_key != "all" and plot_key not in data.columns:
        print("-E- You can't plot by {} with the data provided".format(plot_key))
        return

    # add tilt key into DataFrame columns if it isn't there already
    if tilt_key not in data.columns:
        data.loc[:, tilt_key] = None

    if verbose:
        print(len(data), ' records read from ', in_file)

    # find desired dec,inc data:
    dir_type_key = ''
    #
    # get plotlist if not plotting all records
    #
    plotlist=[]
    if plot_key != "all":
        # return all where plot_key is not blank
        if plot_key not in data.columns:
            print('Can\'t plot by "{}".  That header is not in infile: {}'.format(plot_key, in_file))
            return
        plots = data[data[plot_key].notnull()]
        plotlist = plots[plot_key].unique() # grab unique values
    else:
        plotlist.append('All')

    for plot in plotlist:
        if verbose:
            print(plot)
        if plot == 'All':
            # plot everything at once
            plot_data = data
        else:
            # pull out only partial data
            plot_data = data[data[plot_key] == plot]

        DIblock = []
        GCblock = []
        # SLblock, SPblock = [], []
        title = plot
        mode = 1
        k = 0


        if dec_key not in plot_data.columns:
            print("-W- No dec/inc data")
            continue
        # get all records where dec & inc values exist
        plot_data = plot_data[plot_data[dec_key].notnull() & plot_data[inc_key].notnull()]
        if plot_data.empty:
            continue
        # this sorting out is done in get_di_bock
        #if coord == '0':  # geographic, use records with no tilt key (or tilt_key 0)
        #    cond1 = plot_data[tilt_key].fillna('') == coord
        #    cond2 = plot_data[tilt_key].isnull()
        #    plot_data = plot_data[cond1 | cond2]
        #else:  # not geographic coordinates, use only records with correct tilt_key
        #    plot_data = plot_data[plot_data[tilt_key] == coord]

        # get metadata for naming the plot file
        locations = data_container.get_name('location', df_slice=plot_data)
        site = data_container.get_name('site', df_slice=plot_data)
        sample = data_container.get_name('sample', df_slice=plot_data)
        specimen = data_container.get_name('specimen', df_slice=plot_data)

        # make sure method_codes is in plot_data
        if 'method_codes' not in plot_data.columns:
            plot_data['method_codes'] = ''

        # get data blocks
        DIblock = data_container.get_di_block(df_slice=plot_data,
                                              tilt_corr=coord, excl=['DE-BFP'])
        #SLblock = [[ind, row['method_codes']] for ind, row in plot_data.iterrows()]
        # get great circles
        great_circle_data = data_container.get_records_for_code('DE-BFP', incl=True,
                                                                use_slice=True, sli=plot_data)

        if len(great_circle_data) > 0:
            gc_cond = great_circle_data[tilt_key] == coord
            GCblock = [[float(row[dec_key]), float(row[inc_key])] for ind, row in great_circle_data[gc_cond].iterrows()]
            #SPblock = [[ind, row['method_codes']] for ind, row in great_circle_data[gc_cond].iterrows()]

        if len(DIblock) > 0:
            if contour == 0:
                pmagplotlib.plotEQ(FIG['eqarea'], DIblock, title)
            else:
                pmagplotlib.plotEQcont(FIG['eqarea'], DIblock)
        else:
            pmagplotlib.plotNET(FIG['eqarea'])
        if len(GCblock)>0:
            for rec in GCblock:
                pmagplotlib.plotC(FIG['eqarea'], rec, 90., 'g')
        if len(DIblock) == 0 and len(GCblock) == 0:
            if verbose:
                print("no records for plotting")
            continue
            #sys.exit()
        if plotE == 1:
            ppars = pmag.doprinc(DIblock) # get principal directions
            nDIs, rDIs, npars, rpars = [], [], [], []
            for rec in DIblock:
                angle=pmag.angle([rec[0],rec[1]],[ppars['dec'],ppars['inc']])
                if angle>90.:
                    rDIs.append(rec)
                else:
                    nDIs.append(rec)
            if dist=='B': # do on whole dataset
                etitle="Bingham confidence ellipse"
                bpars=pmag.dobingham(DIblock)
                for key in list(bpars.keys()):
                    if key!='n' and verbose: print("    ",key, '%7.1f'%(bpars[key]))
                    if key=='n' and verbose: print("    ",key, '       %i'%(bpars[key]))
                npars.append(bpars['dec'])
                npars.append(bpars['inc'])
                npars.append(bpars['Zeta'])
                npars.append(bpars['Zdec'])
                npars.append(bpars['Zinc'])
                npars.append(bpars['Eta'])
                npars.append(bpars['Edec'])
                npars.append(bpars['Einc'])
            if dist=='F':
                etitle="Fisher confidence cone"
                if len(nDIs)>2:
                    fpars=pmag.fisher_mean(nDIs)
                    for key in list(fpars.keys()):
                        if key!='n' and verbose: print("    ",key, '%7.1f'%(fpars[key]))
                        if key=='n' and verbose: print("    ",key, '       %i'%(fpars[key]))
                    mode+=1
                    npars.append(fpars['dec'])
                    npars.append(fpars['inc'])
                    npars.append(fpars['alpha95']) # Beta
                    npars.append(fpars['dec'])
                    isign=old_div(abs(fpars['inc']),fpars['inc'])
                    npars.append(fpars['inc']-isign*90.) #Beta inc
                    npars.append(fpars['alpha95']) # gamma
                    npars.append(fpars['dec']+90.) # Beta dec
                    npars.append(0.) #Beta inc
                if len(rDIs)>2:
                    fpars=pmag.fisher_mean(rDIs)
                    if verbose: print("mode ",mode)
                    for key in list(fpars.keys()):
                        if key!='n' and verbose: print("    ",key, '%7.1f'%(fpars[key]))
                        if key=='n' and verbose: print("    ",key, '       %i'%(fpars[key]))
                    mode+=1
                    rpars.append(fpars['dec'])
                    rpars.append(fpars['inc'])
                    rpars.append(fpars['alpha95']) # Beta
                    rpars.append(fpars['dec'])
                    isign=old_div(abs(fpars['inc']),fpars['inc'])
                    rpars.append(fpars['inc']-isign*90.) #Beta inc
                    rpars.append(fpars['alpha95']) # gamma
                    rpars.append(fpars['dec']+90.) # Beta dec
                    rpars.append(0.) #Beta inc
            if dist=='K':
                etitle="Kent confidence ellipse"
                if len(nDIs)>3:
                    kpars=pmag.dokent(nDIs,len(nDIs))
                    if verbose: print("mode ",mode)
                    for key in list(kpars.keys()):
                        if key!='n' and verbose: print("    ",key, '%7.1f'%(kpars[key]))
                        if key=='n' and verbose: print("    ",key, '       %i'%(kpars[key]))
                    mode+=1
                    npars.append(kpars['dec'])
                    npars.append(kpars['inc'])
                    npars.append(kpars['Zeta'])
                    npars.append(kpars['Zdec'])
                    npars.append(kpars['Zinc'])
                    npars.append(kpars['Eta'])
                    npars.append(kpars['Edec'])
                    npars.append(kpars['Einc'])
                if len(rDIs)>3:
                    kpars=pmag.dokent(rDIs,len(rDIs))
                    if verbose: print("mode ",mode)
                    for key in list(kpars.keys()):
                        if key!='n' and verbose: print("    ",key, '%7.1f'%(kpars[key]))
                        if key=='n' and verbose: print("    ",key, '       %i'%(kpars[key]))
                    mode+=1
                    rpars.append(kpars['dec'])
                    rpars.append(kpars['inc'])
                    rpars.append(kpars['Zeta'])
                    rpars.append(kpars['Zdec'])
                    rpars.append(kpars['Zinc'])
                    rpars.append(kpars['Eta'])
                    rpars.append(kpars['Edec'])
                    rpars.append(kpars['Einc'])
            else: # assume bootstrap
                if dist=='BE':
                    if len(nDIs)>5:
                        BnDIs=pmag.di_boot(nDIs)
                        Bkpars=pmag.dokent(BnDIs,1.)
                        if verbose: print("mode ",mode)
                        for key in list(Bkpars.keys()):
                            if key!='n' and verbose: print("    ",key, '%7.1f'%(Bkpars[key]))
                            if key=='n' and verbose: print("    ",key, '       %i'%(Bkpars[key]))
                        mode+=1
                        npars.append(Bkpars['dec'])
                        npars.append(Bkpars['inc'])
                        npars.append(Bkpars['Zeta'])
                        npars.append(Bkpars['Zdec'])
                        npars.append(Bkpars['Zinc'])
                        npars.append(Bkpars['Eta'])
                        npars.append(Bkpars['Edec'])
                        npars.append(Bkpars['Einc'])
                    if len(rDIs)>5:
                        BrDIs=pmag.di_boot(rDIs)
                        Bkpars=pmag.dokent(BrDIs,1.)
                        if verbose: print("mode ",mode)
                        for key in list(Bkpars.keys()):
                            if key!='n' and verbose: print("    ",key, '%7.1f'%(Bkpars[key]))
                            if key=='n' and verbose: print("    ",key, '       %i'%(Bkpars[key]))
                        mode+=1
                        rpars.append(Bkpars['dec'])
                        rpars.append(Bkpars['inc'])
                        rpars.append(Bkpars['Zeta'])
                        rpars.append(Bkpars['Zdec'])
                        rpars.append(Bkpars['Zinc'])
                        rpars.append(Bkpars['Eta'])
                        rpars.append(Bkpars['Edec'])
                        rpars.append(Bkpars['Einc'])
                    etitle="Bootstrapped confidence ellipse"
                elif dist=='BV':
                    sym={'lower':['o','c'],'upper':['o','g'],'size':3,'edgecolor':'face'}
                    if len(nDIs)>5:
                        BnDIs=pmag.di_boot(nDIs)
                        pmagplotlib.plotEQsym(FIG['bdirs'],BnDIs,'Bootstrapped Eigenvectors', sym)
                    if len(rDIs)>5:
                        BrDIs=pmag.di_boot(rDIs)
                        if len(nDIs)>5:  # plot on existing plots
                            pmagplotlib.plotDIsym(FIG['bdirs'],BrDIs,sym)
                        else:
                            pmagplotlib.plotEQ(FIG['bdirs'],BrDIs,'Bootstrapped Eigenvectors')
            if dist=='B':
                if len(nDIs)> 3 or len(rDIs)>3: pmagplotlib.plotCONF(FIG['eqarea'],etitle,[],npars,0)
            elif len(nDIs)>3 and dist!='BV':
                pmagplotlib.plotCONF(FIG['eqarea'],etitle,[],npars,0)
                if len(rDIs)>3:
                    pmagplotlib.plotCONF(FIG['eqarea'],etitle,[],rpars,0)
            elif len(rDIs)>3 and dist!='BV':
                pmagplotlib.plotCONF(FIG['eqarea'],etitle,[],rpars,0)

        for key in list(FIG.keys()):
            files = {}
            filename = pmag.get_named_arg_from_sys('-fname')
            if filename: # use provided filename
                filename+= '.' + fmt
            elif pmagplotlib.isServer: # use server plot naming convention
                filename='LO:_'+locations+'_SI:_'+site+'_SA:_'+sample+'_SP:_'+specimen+'_CO:_'+crd+'_TY:_'+key+'_.'+fmt
            elif plot_key == 'all':
                filename = 'all'
                if 'location' in plot_data.columns:
                    locs = plot_data['location'].unique()
                    loc_string = "_".join([loc.replace(' ', '_') for loc in locs])
                    filename += "_" + loc_string
                filename += "_" + crd + "_" + key
                filename += ".{}".format(fmt)
            else: # use more readable naming convention
                filename = ''
                # fix this if plot_by is location , for example
                use_names = {'location': [locations], 'site': [locations, site],
                             'sample': [locations, site, sample],
                             'specimen': [locations, site, sample, specimen]}
                use = use_names[plot_key]
                use.extend([crd, key])
                for item in use: #[locations, site, sample, specimen, crd, key]:
                    if item:
                        item = item.replace(' ', '_')
                        filename += item + '_'
                if filename.endswith('_'):
                    filename = filename[:-1]
                filename += ".{}".format(fmt)

            files[key]=filename

        if pmagplotlib.isServer:
            black     = '#000000'
            purple    = '#800080'
            titles={}
            titles['eq']='Equal Area Plot'
            FIG = pmagplotlib.addBorders(FIG,titles,black,purple)
            pmagplotlib.saveP(FIG,files)

        if plt:
            pmagplotlib.saveP(FIG,files)
            continue
        if verbose:
            pmagplotlib.drawFIGS(FIG)
            ans=input(" S[a]ve to save plot, [q]uit, Return to continue:  ")
            if ans == "q":
                sys.exit()
            if ans == "a":
                pmagplotlib.saveP(FIG,files)
        continue
Esempio n. 27
0
def main():
    """
    NAME
        lowrie.py

    DESCRIPTION
       plots intensity decay curves for Lowrie experiments

    SYNTAX
        lowrie -h [command line options]

    INPUT
       takes SIO formatted input files

    OPTIONS
        -h prints help message and quits
        -f FILE: specify input file
        -N do not normalize by maximum magnetization
        -fmt [svg, pdf, eps, png] specify fmt, default is svg
        -sav save plots and quit
    """
    fmt, plot = 'svg', 0
    FIG = {}  # plot dictionary
    FIG['lowrie'] = 1  # demag is figure 1
    pmagplotlib.plot_init(FIG['lowrie'], 6, 6)
    norm = 1  # default is to normalize by maximum axis
    if len(sys.argv) > 1:
        if '-h' in sys.argv:
            print(main.__doc__)
            sys.exit()
        if '-N' in sys.argv:
            norm = 0  # don't normalize
        if '-sav' in sys.argv:
            plot = 1  # don't normalize
        if '-fmt' in sys.argv:  # sets input filename
            ind = sys.argv.index("-fmt")
            fmt = sys.argv[ind + 1]
        if '-f' in sys.argv:  # sets input filename
            ind = sys.argv.index("-f")
            in_file = sys.argv[ind + 1]
        else:
            print(main.__doc__)
            print('you must supply a file name')
            sys.exit()
    else:
        print(main.__doc__)
        print('you must supply a file name')
        sys.exit()
    data = pmag.open_file(in_file)
    PmagRecs = []  # set up a list for the results
    keys = ['specimen', 'treatment', 'csd', 'M', 'dec', 'inc']
    for line in data:
        PmagRec = {}
        rec = line.replace('\n', '').split()
        for k in range(len(keys)):
            PmagRec[keys[k]] = rec[k]
        PmagRecs.append(PmagRec)
    specs = pmag.get_dictkey(PmagRecs, 'specimen', '')
    sids = []
    for spec in specs:
        if spec not in sids:
            sids.append(spec)  # get list of unique specimen names
    for spc in sids:  # step through the specimen names
        print(spc)
        specdata = pmag.get_dictitem(PmagRecs, 'specimen', spc,
                                     'T')  # get all this one's data
        DIMs, Temps = [], []
        for dat in specdata:  # step through the data
            DIMs.append(
                [float(dat['dec']),
                 float(dat['inc']),
                 float(dat['M']) * 1e-3])
            Temps.append(float(dat['treatment']))
        carts = pmag.dir2cart(DIMs).transpose()
        # if norm==1: # want to normalize
        #    nrm=max(max(abs(carts[0])),max(abs(carts[1])),max(abs(carts[2]))) # by maximum of x,y,z values
        #    ylab="M/M_max"
        if norm == 1:  # want to normalize
            nrm = (DIMs[0][2])  # normalize by NRM
            ylab = "M/M_o"
        else:
            nrm = 1.  # don't normalize
            ylab = "Magnetic moment (Am^2)"
        xlab = "Temperature (C)"
        pmagplotlib.plotXY(FIG['lowrie'],
                           Temps,
                           old_div(abs(carts[0]), nrm),
                           sym='r-')
        pmagplotlib.plotXY(FIG['lowrie'],
                           Temps,
                           old_div(abs(carts[0]), nrm),
                           sym='ro')  # X direction
        pmagplotlib.plotXY(FIG['lowrie'],
                           Temps,
                           old_div(abs(carts[1]), nrm),
                           sym='c-')
        pmagplotlib.plotXY(FIG['lowrie'],
                           Temps,
                           old_div(abs(carts[1]), nrm),
                           sym='cs')  # Y direction
        pmagplotlib.plotXY(FIG['lowrie'],
                           Temps,
                           old_div(abs(carts[2]), nrm),
                           sym='k-')
        pmagplotlib.plotXY(FIG['lowrie'],
                           Temps,
                           old_div(abs(carts[2]), nrm),
                           sym='k^',
                           title=spc,
                           xlab=xlab,
                           ylab=ylab)  # Z direction
        files = {'lowrie': 'lowrie:_' + spc + '_.' + fmt}
        if plot == 0:
            pmagplotlib.drawFIGS(FIG)
            ans = input('S[a]ve figure? [q]uit, <return> to continue   ')
            if ans == 'a':
                pmagplotlib.saveP(FIG, files)
            elif ans == 'q':
                sys.exit()
        else:
            pmagplotlib.saveP(FIG, files)
        pmagplotlib.clearFIG(FIG['lowrie'])
Esempio n. 28
0
def main():
    """
    NAME
        dmag_magic.py

    DESCRIPTION
       plots intensity decay curves for demagnetization experiments

    SYNTAX
        dmag_magic -h [command line options]

    INPUT
       takes magic formatted magic_measurements.txt files

    OPTIONS
        -h prints help message and quits
        -f FILE: specify input file, default is: magic_measurements.txt
        -obj OBJ: specify  object  [loc, sit, sam, spc] for plot,
               default is by location
        -LT [AF,T,M]: specify lab treatment type, default AF
        -XLP [PI]: exclude specific  lab protocols,
               (for example, method codes like LP-PI)
        -N do not normalize by NRM magnetization
        -sav save plots silently and quit
        -fmt [svg,jpg,png,pdf] set figure format [default is svg]
    NOTE
        loc: location (study); sit: site; sam: sample; spc: specimen
    """
    if '-h' in sys.argv:
        print(main.__doc__)
        sys.exit()
    # initialize variables from command line + defaults
    FIG = {}  # plot dictionary
    FIG['demag'] = 1  # demag is figure 1
    in_file = pmag.get_named_arg_from_sys("-f", default_val="measurements.txt")
    plot_by = pmag.get_named_arg_from_sys("-obj", default_val="loc")
    name_dict = {
        'loc': 'location',
        'sit': 'site',
        'sam': 'sample',
        'spc': 'specimen'
    }
    plot_key = name_dict[plot_by]
    LT = "LT-" + pmag.get_named_arg_from_sys("-LT", "AF") + "-Z"
    if LT == "LT-T-Z":
        units, dmag_key = 'K', 'treat_temp'
    elif LT == "LT-AF-Z":
        units, dmag_key = 'T', 'treat_ac_field'
    elif LT == 'LT-M-Z':
        units, dmag_key = 'J', 'treat_mw_energy'
    else:
        units = 'U'
    no_norm = pmag.get_flag_arg_from_sys("-N")
    norm = 0 if no_norm else 1
    no_plot = pmag.get_flag_arg_from_sys("-sav")
    plot = 0 if no_plot else 1
    fmt = pmag.get_named_arg_from_sys("-fmt", "svg")
    XLP = pmag.get_named_arg_from_sys("-XLP", "")
    dir_path = pmag.get_named_arg_from_sys("-WD", os.getcwd())
    spec_file = pmag.get_named_arg_from_sys("-fsp",
                                            default_val="specimens.txt")
    samp_file = pmag.get_named_arg_from_sys("-fsa", default_val="samples.txt")
    site_file = pmag.get_named_arg_from_sys("-fsi", default_val="sites.txt")

    # create contribution and add required headers
    fnames = {"specimens": spec_file, "samples": samp_file, 'sites': site_file}
    contribution = nb.Contribution(dir_path,
                                   single_file=in_file,
                                   custom_filenames=fnames)
    file_type = list(contribution.tables.keys())[0]
    print(len(contribution.tables['measurements'].df), ' records read from ',
          in_file)
    # add plot_key into measurements table
    if plot_key not in contribution.tables['measurements'].df.columns:
        #contribution.propagate_name_down(plot_key, 'measurements')
        contribution.propagate_location_to_measurements()
    data_container = contribution.tables[file_type]
    # pare down to only records with useful data
    # grab records that have the requested code
    data_slice = data_container.get_records_for_code(LT)
    # and don't have the offending code
    data = data_container.get_records_for_code(XLP,
                                               incl=False,
                                               use_slice=True,
                                               sli=data_slice,
                                               strict_match=False)

    # make sure quality is in the dataframe
    if 'quality' not in data.columns:
        data['quality'] = 'g'
    # get intensity key and make sure intensity data is not blank
    intlist = ['magn_moment', 'magn_volume', 'magn_mass']
    IntMeths = [col_name for col_name in data.columns if col_name in intlist]
    # get rid of any entirely blank intensity columns
    for col_name in IntMeths:
        if not data[col_name].any():
            data.drop(col_name, axis=1, inplace=True)
    IntMeths = [col_name for col_name in data.columns if col_name in intlist]
    if len(IntMeths) == 0:
        print('No intensity headers found')
        sys.exit()

    int_key = IntMeths[
        0]  # plot first intensity method found - normalized to initial value anyway - doesn't matter which used
    data = data[data[int_key].notnull()]
    # make list of individual plots
    # by default, will be by location_name
    plotlist = data[plot_key].unique()
    plotlist.sort()
    pmagplotlib.plot_init(FIG['demag'], 5, 5)
    # iterate through and plot the data
    for plt in plotlist:
        plot_data = data[data[plot_key] == plt].copy()
        if plot:
            print(plt, 'plotting by: ', plot_key)
        if len(plot_data) > 2:
            title = plt
            spcs = []
            spcs = plot_data['specimen'].unique()
            for spc in spcs:
                INTblock = []
                spec_data = plot_data[plot_data['specimen'] == spc]
                for ind, rec in spec_data.iterrows():
                    INTblock.append([
                        float(rec[dmag_key]), 0, 0,
                        float(rec[int_key]), 1, rec['quality']
                    ])
                if len(INTblock) > 2:
                    pmagplotlib.plotMT(FIG['demag'], INTblock, title, 0, units,
                                       norm)

            if not plot:
                files = {}
                for key in list(FIG.keys()):
                    files[key] = title + '_' + LT + '.' + fmt
                pmagplotlib.saveP(FIG, files)
                #sys.exit()
            else:
                pmagplotlib.drawFIGS(FIG)
                prompt = " S[a]ve to save plot, [q]uit,  Return to continue:  "
                ans = input(prompt)
                if ans == 'q':
                    sys.exit()
                if ans == "a":
                    files = {}
                    for key in list(FIG.keys()):
                        files[key] = title + '_' + LT + '.' + fmt
                    pmagplotlib.saveP(FIG, files)
            pmagplotlib.clearFIG(FIG['demag'])
Esempio n. 29
0
def main():
    """
    NAME
        irmaq_magic.py

    DESCRIPTION
       plots IRM acquisition curves from magic_measurements file

    SYNTAX 
        irmaq_magic [command line options]
    
    INPUT 
       takes magic formatted magic_measurements.txt files
    
    OPTIONS
        -h prints help message and quits
        -f FILE: specify input file, default is: magic_measurements.txt
        -obj OBJ: specify  object  [loc, sit, sam, spc] for plot, default is by location
        -N ; do not normalize by last point - use original units
        -fmt [png,jpg,eps,pdf] set plot file format [default is svg]
        -sav save plot[s] and quit
    NOTE
        loc: location (study); sit: site; sam: sample; spc: specimen
    """
    FIG = {}  # plot dictionary
    FIG['exp'] = 1  # exp is figure 1
    dir_path = './'
    plot, fmt = 0, 'svg'
    units, dmag_key = 'T', 'treatment_dc_field'
    XLP = []
    norm = 1
    in_file, plot_key, LP = 'magic_measurements.txt', 'er_location_name', "LP-IRM"
    if len(sys.argv) > 1:
        if '-h' in sys.argv:
            print main.__doc__
            sys.exit()
        if '-N' in sys.argv: norm = 0
        if '-sav' in sys.argv: plot = 1
        if '-fmt' in sys.argv:
            ind = sys.argv.index("-fmt")
            fmt = sys.argv[ind + 1]
        if '-f' in sys.argv:
            ind = sys.argv.index("-f")
            in_file = sys.argv[ind + 1]
        if '-WD' in sys.argv:
            ind = sys.argv.index('-WD')
            dir_path = sys.argv[ind + 1]
            in_file = dir_path + '/' + in_file
        if '-obj' in sys.argv:
            ind = sys.argv.index('-obj')
            plot_by = sys.argv[ind + 1]
            if plot_by == 'sit': plot_key = 'er_site_name'
            if plot_by == 'sam': plot_key = 'er_sample_name'
            if plot_by == 'spc': plot_key = 'er_specimen_name'
    data, file_type = pmag.magic_read(in_file)
    sids = pmag.get_specs(data)
    pmagplotlib.plot_init(FIG['exp'], 6, 6)
    #
    #
    # find desired intensity data
    #
    # get plotlist
    #
    plotlist, intlist = [], [
        'measurement_magnitude', 'measurement_magn_moment',
        'measurement_magn_volume', 'measurement_magn_mass'
    ]
    IntMeths = []
    data = pmag.get_dictitem(
        data, 'magic_method_codes', LP,
        'has')  # get all the records with this lab protocol
    Ints = {}
    NoInts, int_key = 1, ""
    for key in intlist:
        Ints[key] = pmag.get_dictitem(
            data, key, '', 'F')  # get all non-blank data for intensity type
        if len(Ints[key]) > 0:
            NoInts = 0
            if int_key == "": int_key = key
    if NoInts == 1:
        print 'No intensity information found'
        sys.exit()
    for rec in Ints[int_key]:
        if rec[plot_key] not in plotlist: plotlist.append(rec[plot_key])
    plotlist.sort()
    for plt in plotlist:
        print plt
        INTblock = []
        data = pmag.get_dictitem(
            Ints[int_key], plot_key, plt, 'T'
        )  # get data with right intensity info whose plot_key matches plot
        sids = pmag.get_specs(
            data)  # get a list of specimens with appropriate data
        if len(sids) > 0:
            title = data[0][plot_key]
        for s in sids:
            INTblock = []
            sdata = pmag.get_dictitem(data, 'er_specimen_name', s,
                                      'T')  # get data for each specimen
            for rec in sdata:
                INTblock.append(
                    [float(rec[dmag_key]), 0, 0,
                     float(rec[int_key]), 1, 'g'])
            pmagplotlib.plotMT(FIG['exp'], INTblock, title, 0, units, norm)
        files = {}
        for key in FIG.keys():
            files[key] = title + '_' + LP + '.' + fmt
        if plot == 0:
            pmagplotlib.drawFIGS(FIG)
            ans = raw_input(
                " S[a]ve to save plot, [q]uit,  Return to continue:  ")
            if ans == 'q': sys.exit()
            if ans == "a":
                pmagplotlib.saveP(FIG, files)
        else:
            pmagplotlib.saveP(FIG, files)
        pmagplotlib.clearFIG(FIG['exp'])
Esempio n. 30
0
def main():
    """
    NAME
       revtest.py

    DESCRIPTION
       calculates bootstrap statistics to test for antipodality

    INPUT FORMAT
       takes dec/inc as first two columns in space delimited file
   
    SYNTAX
       revtest.py [-h] [command line options]
    
    OPTION
       -h prints help message and quits
       -f FILE, sets input filename on command line
       -fmt [svg,png,jpg], sets format for image output
       -sav saves the figures silently and quits
               

    """
    fmt,plot='svg',0
    if '-h' in sys.argv: # check if help is needed
        print(main.__doc__)
        sys.exit() # graceful quit
    if '-f' in sys.argv:
        ind=sys.argv.index('-f')
        file=sys.argv[ind+1]
        data=numpy.loadtxt(file).transpose()
        D=numpy.array([data[0],data[1]]).transpose()
    else: 
        print('-f is a required switch')
        print(main.__doc__)
        print(sys.exit())
    if '-fmt' in sys.argv:
        ind=sys.argv.index('-fmt')
        fmt=sys.argv[ind+1]
    if '-sav' in sys.argv:plot=1
# set up plots
    d=""
    CDF={'X':1,'Y':2,'Z':3}
    pmagplotlib.plot_init(CDF['X'],5,5)
    pmagplotlib.plot_init(CDF['Y'],5,5)
    pmagplotlib.plot_init(CDF['Z'],5,5)
#
# flip reverse mode
#
    D1,D2=pmag.flip(D)
    counter,NumSims=0,500
#
# get bootstrapped means for each data set
#
    print('doing first mode, be patient')
    BDI1=pmag.di_boot(D1)
    print('doing second mode, be patient')
    BDI2=pmag.di_boot(D2)
    pmagplotlib.plotCOM(CDF,BDI1,BDI2,[""])
    files={}
    for key in list(CDF.keys()):
        files[key]='REV'+'_'+key+'.'+fmt 
    if plot==0:
        pmagplotlib.drawFIGS(CDF)
        ans=  input("s[a]ve plots, [q]uit: ")
        if ans=='a':
            pmagplotlib.saveP(CDF,files)
        print('good bye')
        sys.exit()
    else:
        pmagplotlib.saveP(CDF,files)
Esempio n. 31
0
def main():
    """
    NAME
        eqarea_ell.py

    DESCRIPTION
       makes equal area projections from declination/inclination data
       and plot ellipses

    SYNTAX 
        eqarea_ell.py -h [command line options]
    
    INPUT 
       takes space delimited Dec/Inc data
    
    OPTIONS
        -h prints help message and quits
        -f FILE
        -fmt [svg,png,jpg] format for output plots
        -sav  saves figures and quits
        -ell [F,K,B,Be,Bv] plot Fisher, Kent, Bingham, Bootstrap ellipses or Boostrap eigenvectors
    """
    FIG={} # plot dictionary
    FIG['eq']=1 # eqarea is figure 1
    fmt,dist,mode,plot='svg','F',1,0
    sym={'lower':['o','r'],'upper':['o','w'],'size':10}
    plotE=0
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    pmagplotlib.plot_init(FIG['eq'],5,5)
    if '-sav' in sys.argv:plot=1
    if '-f' in sys.argv:
        ind=sys.argv.index("-f")
        title=sys.argv[ind+1]
        data=numpy.loadtxt(title).transpose()
    if '-ell' in sys.argv:
        plotE=1
        ind=sys.argv.index('-ell')
        ell_type=sys.argv[ind+1]
        if ell_type=='F':dist='F' 
        if ell_type=='K':dist='K' 
        if ell_type=='B':dist='B' 
        if ell_type=='Be':dist='BE' 
        if ell_type=='Bv':
            dist='BV' 
            FIG['bdirs']=2
            pmagplotlib.plot_init(FIG['bdirs'],5,5)
    if '-fmt' in sys.argv:
        ind=sys.argv.index("-fmt")
        fmt=sys.argv[ind+1]
    DIblock=numpy.array([data[0],data[1]]).transpose()
    if len(DIblock)>0: 
        pmagplotlib.plotEQsym(FIG['eq'],DIblock,title,sym)
        if plot==0:pmagplotlib.drawFIGS(FIG)
    else:
        print "no data to plot"
        sys.exit()
    if plotE==1:
        ppars=pmag.doprinc(DIblock) # get principal directions
        nDIs,rDIs,npars,rpars=[],[],[],[]
        for rec in DIblock:
            angle=pmag.angle([rec[0],rec[1]],[ppars['dec'],ppars['inc']])
            if angle>90.:
                rDIs.append(rec)
            else:
                nDIs.append(rec)
        if dist=='B': # do on whole dataset
            etitle="Bingham confidence ellipse"
            bpars=pmag.dobingham(DIblock)
            for key in bpars.keys():
                if key!='n' and pmagplotlib.verbose:print "    ",key, '%7.1f'%(bpars[key])
                if key=='n' and pmagplotlib.verbose:print "    ",key, '       %i'%(bpars[key])
            npars.append(bpars['dec']) 
            npars.append(bpars['inc'])
            npars.append(bpars['Zeta']) 
            npars.append(bpars['Zdec']) 
            npars.append(bpars['Zinc'])
            npars.append(bpars['Eta']) 
            npars.append(bpars['Edec']) 
            npars.append(bpars['Einc'])
        if dist=='F':
            etitle="Fisher confidence cone"
            if len(nDIs)>3:
                fpars=pmag.fisher_mean(nDIs)
                for key in fpars.keys():
                    if key!='n' and pmagplotlib.verbose:print "    ",key, '%7.1f'%(fpars[key])
                    if key=='n' and pmagplotlib.verbose:print "    ",key, '       %i'%(fpars[key])
                mode+=1
                npars.append(fpars['dec']) 
                npars.append(fpars['inc'])
                npars.append(fpars['alpha95']) # Beta
                npars.append(fpars['dec']) 
                isign=abs(fpars['inc'])/fpars['inc'] 
                npars.append(fpars['inc']-isign*90.) #Beta inc
                npars.append(fpars['alpha95']) # gamma 
                npars.append(fpars['dec']+90.) # Beta dec
                npars.append(0.) #Beta inc
            if len(rDIs)>3:
                fpars=pmag.fisher_mean(rDIs)
                if pmagplotlib.verbose:print "mode ",mode
                for key in fpars.keys():
                    if key!='n' and pmagplotlib.verbose:print "    ",key, '%7.1f'%(fpars[key])
                    if key=='n' and pmagplotlib.verbose:print "    ",key, '       %i'%(fpars[key])
                mode+=1
                rpars.append(fpars['dec']) 
                rpars.append(fpars['inc'])
                rpars.append(fpars['alpha95']) # Beta
                rpars.append(fpars['dec']) 
                isign=abs(fpars['inc'])/fpars['inc'] 
                rpars.append(fpars['inc']-isign*90.) #Beta inc
                rpars.append(fpars['alpha95']) # gamma 
                rpars.append(fpars['dec']+90.) # Beta dec
                rpars.append(0.) #Beta inc
        if dist=='K':
            etitle="Kent confidence ellipse"
            if len(nDIs)>3:
                kpars=pmag.dokent(nDIs,len(nDIs))
                if pmagplotlib.verbose:print "mode ",mode
                for key in kpars.keys():
                    if key!='n' and pmagplotlib.verbose:print "    ",key, '%7.1f'%(kpars[key])
                    if key=='n' and pmagplotlib.verbose:print "    ",key, '       %i'%(kpars[key])
                mode+=1
                npars.append(kpars['dec']) 
                npars.append(kpars['inc'])
                npars.append(kpars['Zeta']) 
                npars.append(kpars['Zdec']) 
                npars.append(kpars['Zinc'])
                npars.append(kpars['Eta']) 
                npars.append(kpars['Edec']) 
                npars.append(kpars['Einc'])
            if len(rDIs)>3:
                kpars=pmag.dokent(rDIs,len(rDIs))
                if pmagplotlib.verbose:print "mode ",mode
                for key in kpars.keys():
                    if key!='n' and pmagplotlib.verbose:print "    ",key, '%7.1f'%(kpars[key])
                    if key=='n' and pmagplotlib.verbose:print "    ",key, '       %i'%(kpars[key])
                mode+=1
                rpars.append(kpars['dec']) 
                rpars.append(kpars['inc'])
                rpars.append(kpars['Zeta']) 
                rpars.append(kpars['Zdec']) 
                rpars.append(kpars['Zinc'])
                rpars.append(kpars['Eta']) 
                rpars.append(kpars['Edec']) 
                rpars.append(kpars['Einc'])
        else: # assume bootstrap
            if len(nDIs)<10 and len(rDIs)<10:
                print 'too few data points for bootstrap'
                sys.exit()
            if dist=='BE':
                print 'Be patient for bootstrap...'
                if len(nDIs)>=10:
                    BnDIs=pmag.di_boot(nDIs)
                    Bkpars=pmag.dokent(BnDIs,1.)
                    if pmagplotlib.verbose:print "mode ",mode
                    for key in Bkpars.keys():
                        if key!='n' and pmagplotlib.verbose:print "    ",key, '%7.1f'%(Bkpars[key])
                        if key=='n' and pmagplotlib.verbose:print "    ",key, '       %i'%(Bkpars[key])
                    mode+=1
                    npars.append(Bkpars['dec']) 
                    npars.append(Bkpars['inc'])
                    npars.append(Bkpars['Zeta']) 
                    npars.append(Bkpars['Zdec']) 
                    npars.append(Bkpars['Zinc'])
                    npars.append(Bkpars['Eta']) 
                    npars.append(Bkpars['Edec']) 
                    npars.append(Bkpars['Einc'])
                if len(rDIs)>=10:
                    BrDIs=pmag.di_boot(rDIs)
                    Bkpars=pmag.dokent(BrDIs,1.)
                    if pmagplotlib.verbose:print "mode ",mode
                    for key in Bkpars.keys():
                        if key!='n' and pmagplotlib.verbose:print "    ",key, '%7.1f'%(Bkpars[key])
                        if key=='n' and pmagplotlib.verbose:print "    ",key, '       %i'%(Bkpars[key])
                    mode+=1
                    rpars.append(Bkpars['dec']) 
                    rpars.append(Bkpars['inc'])
                    rpars.append(Bkpars['Zeta']) 
                    rpars.append(Bkpars['Zdec']) 
                    rpars.append(Bkpars['Zinc'])
                    rpars.append(Bkpars['Eta']) 
                    rpars.append(Bkpars['Edec']) 
                    rpars.append(Bkpars['Einc'])
                etitle="Bootstrapped confidence ellipse"
            elif dist=='BV':
                print 'Be patient for bootstrap...'
                vsym={'lower':['+','k'],'upper':['x','k'],'size':5}
                if len(nDIs)>5:
                    BnDIs=pmag.di_boot(nDIs)
                    pmagplotlib.plotEQsym(FIG['bdirs'],BnDIs,'Bootstrapped Eigenvectors',vsym)
                if len(rDIs)>5:
                    BrDIs=pmag.di_boot(rDIs)
                    if len(nDIs)>5:  # plot on existing plots
                        pmagplotlib.plotDIsym(FIG['bdirs'],BrDIs,vsym)
                    else:
                        pmagplotlib.plotEQ(FIG['bdirs'],BrDIs,'Bootstrapped Eigenvectors',vsym)
        if dist=='B':
            if len(nDIs)> 3 or len(rDIs)>3: pmagplotlib.plotCONF(FIG['eq'],etitle,[],npars,0)
        elif len(nDIs)>3 and dist!='BV':
            pmagplotlib.plotCONF(FIG['eq'],etitle,[],npars,0)
            if len(rDIs)>3:
                pmagplotlib.plotCONF(FIG['eq'],etitle,[],rpars,0)
        elif len(rDIs)>3 and dist!='BV':
            pmagplotlib.plotCONF(FIG['eq'],etitle,[],rpars,0)
        if plot==0:pmagplotlib.drawFIGS(FIG)
    if plot==0:pmagplotlib.drawFIGS(FIG)
        #
    files={}
    for key in FIG.keys():
        files[key]=title+'_'+key+'.'+fmt 
    if pmagplotlib.isServer:
        black     = '#000000'
        purple    = '#800080'
        titles={}
        titles['eq']='Equal Area Plot'
        FIG = pmagplotlib.addBorders(FIG,titles,black,purple)
        pmagplotlib.saveP(FIG,files)
    elif plot==0:
        ans=raw_input(" S[a]ve to save plot, [q]uit, Return to continue:  ")
        if ans=="q": sys.exit()
        if ans=="a": 
            pmagplotlib.saveP(FIG,files) 
    else:
        pmagplotlib.saveP(FIG,files)
Esempio n. 32
0
def main():
    """
    NAME
        hysteresis_magic.py

    DESCRIPTION
        calculates hystereis parameters and saves them in 3.0 specimen format file
        makes plots if option selected

    SYNTAX
        hysteresis_magic.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f: specify input file, default is agm_measurements.txt
        -F: specify specimens.txt output file
        -P: do not make the plots
        -spc SPEC: specify specimen name to plot and quit
        -sav save all plots and quit
        -fmt [png,svg,eps,jpg]
    """
    args=sys.argv
    PLT=1
    plots=0
    fmt=pmag.get_named_arg_from_sys('-fmt','svg')
    dir_path=pmag.get_named_arg_from_sys('-WD','.')
    dir_path=os.path.realpath(dir_path)
    verbose=pmagplotlib.verbose
    version_num=pmag.get_version()
    user=pmag.get_named_arg_from_sys('-usr','')
    if "-h" in args:
        print(main.__doc__)
        sys.exit()
    meas_file=pmag.get_named_arg_from_sys('-f','agm_measurements.txt')
    spec_file=pmag.get_named_arg_from_sys('-F','specimens.txt')
    if '-P' in args:
        PLT=0
        irm_init,imag_init=-1,-1
    if '-sav' in args:
        verbose=0
        plots=1
    pltspec=pmag.get_named_arg_from_sys('-spc',0)
    if pltspec:
        #pltspec= args[ind+1]
        verbose=0
        plots=1
    spec_file=dir_path+'/'+spec_file
    meas_file=dir_path+'/'+meas_file
    SpecRecs=[]
    #
    #
    meas_data,file_type=pmag.magic_read(meas_file)
    if file_type!='measurements':
        print(main.__doc__)
        print('bad file')
        sys.exit()
    #
    # initialize some variables
    # define figure numbers for hyst,deltaM,DdeltaM curves
    HystRecs,RemRecs=[],[]
    HDD={}
    if verbose:
        if verbose and PLT:print("Plots may be on top of each other - use mouse to place ")
    if PLT:
        HDD['hyst'],HDD['deltaM'],HDD['DdeltaM']=1,2,3
        pmagplotlib.plot_init(HDD['DdeltaM'],5,5)
        pmagplotlib.plot_init(HDD['deltaM'],5,5)
        pmagplotlib.plot_init(HDD['hyst'],5,5)
        imag_init=0
        irm_init=0
    else:
        HDD['hyst'],HDD['deltaM'],HDD['DdeltaM'],HDD['irm'],HDD['imag']=0,0,0,0,0
    #
    if spec_file: prior_data,file_type=pmag.magic_read(spec_file)
    #
    # get list of unique experiment names and specimen names
    #
    experiment_names,sids=[],[]
    hys_data=pmag.get_dictitem(meas_data,'method_codes','LP-HYS','has')
    dcd_data=pmag.get_dictitem(meas_data,'method_codes','LP-IRM-DCD','has')
    imag_data=pmag.get_dictitem(meas_data,'method_codes','LP-IMAG','has')
    for rec in hys_data:
        if rec['experiment'] not in experiment_names:experiment_names.append(rec['experiment'])
        if rec['specimen'] not in sids:sids.append(rec['specimen'])
    #
    k=0
    if pltspec:
        k=sids.index(pltspec)
        print(sids[k])
    while k < len(sids):
        specimen=sids[k]
        HystRec={'specimen':specimen,'experiment':""} # initialize a new specimen hysteresis record
        if verbose and PLT:print(specimen, k+1 , 'out of ',len(sids))
    #
    #
        B,M,Bdcd,Mdcd=[],[],[],[] #B,M for hysteresis, Bdcd,Mdcd for irm-dcd data
        Bimag,Mimag=[],[] #Bimag,Mimag for initial magnetization curves
        spec_data=pmag.get_dictitem(hys_data,'specimen',specimen,'T') # fish out all the LP-HYS data for this specimen
        if len(spec_data)>0:
            meths=spec_data[0]['method_codes'].split(':')
            e=spec_data[0]['experiment']
            HystRec['experiment']=spec_data[0]['experiment']
            for rec in  spec_data:
                B.append(float(rec['meas_field_dc']))
                M.append(float(rec['magn_moment']))
        spec_data=pmag.get_dictitem(dcd_data,'specimen',specimen,'T') # fish out all the data for this specimen
        if len(spec_data)>0:
            HystRec['experiment']=HystRec['experiment']+':'+spec_data[0]['experiment']
            irm_exp=spec_data[0]['experiment']
            for rec in  spec_data:
                Bdcd.append(float(rec['treat_dc_field']))
                Mdcd.append(float(rec['magn_moment']))
        spec_data=pmag.get_dictitem(imag_data,'specimen',specimen,'T') # fish out all the data for this specimen
        if len(spec_data)>0:
            imag_exp=spec_data[0]['experiment']
            for rec in  spec_data:
                Bimag.append(float(rec['meas_field_dc']))
                Mimag.append(float(rec['magn_moment']))
    #
    # now plot the hysteresis curve
    #
        if len(B)>0:
            hmeths=[]
            for meth in meths: hmeths.append(meth)

            hpars=pmagplotlib.plotHDD(HDD,B,M,e)
            if verbose and PLT:pmagplotlib.drawFIGS(HDD)
    #
            if verbose:pmagplotlib.plotHPARS(HDD,hpars,'bs')
            HystRec['hyst_mr_moment']=hpars['hysteresis_mr_moment']
            HystRec['hyst_ms_moment']=hpars['hysteresis_ms_moment']
            HystRec['hyst_bc']=hpars['hysteresis_bc']
            HystRec['hyst_bcr']=hpars['hysteresis_bcr']
            HystRec['susc_h']=hpars['hysteresis_xhf']
            HystRec['experiments']=e
            HystRec['software_packages']=version_num
            if hpars["magic_method_codes"] not in hmeths:hmeths.append(hpars["magic_method_codes"])
            methods=""
            for meth in hmeths:
                methods=methods+meth.strip()+":"
            HystRec["method_codes"]=methods[:-1]
            HystRec["citations"]="This study"
    #
        if len(Bdcd)>0:
            rmeths=[]
            for meth in meths: rmeths.append(meth)
            if verbose and PLT:print('plotting IRM')
            if irm_init==0:
                HDD['irm']=5
                pmagplotlib.plot_init(HDD['irm'],5,5)
                irm_init=1
            rpars=pmagplotlib.plotIRM(HDD['irm'],Bdcd,Mdcd,irm_exp)
            HystRec['rem_mr_moment']=rpars['remanence_mr_moment']
            HystRec['rem_bcr']=rpars['remanence_bcr']
            HystRec['experiments']=specimen+':'+irm_exp
            if rpars["magic_method_codes"] not in meths:meths.append(rpars["magic_method_codes"])
            methods=""
            for meth in rmeths:
                methods=methods+meth.strip()+":"
            HystRec["method_codes"]=HystRec['method_codes']+':'+methods[:-1]
            HystRec["citations"]="This study"
        else:
            if irm_init:pmagplotlib.clearFIG(HDD['irm'])
        if len(Bimag)>0:
            if verbose and PLT:print('plotting initial magnetization curve')
# first normalize by Ms
            Mnorm=[]
            for m in Mimag: Mnorm.append(old_div(m,float(hpars['hysteresis_ms_moment'])))
            if imag_init==0:
                HDD['imag']=4
                pmagplotlib.plot_init(HDD['imag'],5,5)
                imag_init=1
            pmagplotlib.plotIMAG(HDD['imag'],Bimag,Mnorm,imag_exp)
        else:
            if imag_init:pmagplotlib.clearFIG(HDD['imag'])
        if len(list(HystRec.keys()))>0:HystRecs.append(HystRec)
    #
        files={}
        if plots:
            if pltspec:s=pltspec
            files={}
            for key in list(HDD.keys()):
                files[key]=s+'_'+key+'.'+fmt
            pmagplotlib.saveP(HDD,files)
            if pltspec:sys.exit()
        if verbose and PLT:
            pmagplotlib.drawFIGS(HDD)
            ans=input("S[a]ve plots, [s]pecimen name, [q]uit, <return> to continue\n ")
            if ans=="a":
                files={}
                for key in list(HDD.keys()):
                    files[key]=specimen+'_'+key+'.'+fmt
                pmagplotlib.saveP(HDD,files)
            if ans=='':k+=1
            if ans=="p":
                del HystRecs[-1]
                k-=1
            if  ans=='q':
                print("Good bye")
                sys.exit()
            if ans=='s':
                keepon=1
                specimen=input('Enter desired specimen name (or first part there of): ')
                while keepon==1:
                    try:
                        k =sids.index(specimen)
                        keepon=0
                    except:
                        tmplist=[]
                        for qq in range(len(sids)):
                            if specimen in sids[qq]:tmplist.append(sids[qq])
                        print(specimen," not found, but this was: ")
                        print(tmplist)
                        specimen=input('Select one or try again\n ')
                        k =sids.index(specimen)
        else:
            k+=1
        if len(B)==0 and len(Bdcd)==0:
            if verbose:print('skipping this one - no hysteresis data')
            k+=1
    if len(HystRecs)>0:
    #  go through prior_data, clean out prior results and save combined file as spec_file
        SpecRecs,keys=[],list(HystRecs[0].keys())
        if len(prior_data)>0:
            prior_keys=list(prior_data[0].keys())
        else: prior_keys=[]
        for rec in prior_data:
            for key in keys:
                if key not in list(rec.keys()):rec[key]=""
            if  'LP-HYS' not in rec['method_codes']:
                SpecRecs.append(rec)
        for rec in HystRecs:
            for key in prior_keys:
                if key not in list(rec.keys()):rec[key]=""
            prior=pmag.get_dictitem(prior_data,'specimen',rec['specimen'],'T')
            if len(prior)>0 and 'sample' in list(prior[0].keys()):
                rec['sample']=prior[0]['sample'] # pull sample name from prior specimens table
            SpecRecs.append(rec)
        pmag.magic_write(spec_file,SpecRecs,"specimens")
        if verbose:print("hysteresis parameters saved in ",spec_file)
Esempio n. 33
0
def main():
    """
    NAME
        chi_magic.py

    DESCRIPTION
        plots magnetic susceptibility as a function of frequency and temperature and AC field

    SYNTAX
        chi_magic.py [command line options]

    OPTIONS
        -h prints help message and quits
        -i allows interactive setting of FILE and temperature step
        -f FILE, specify magic_measurements format file
        -T IND, specify temperature step to plot
        -e EXP, specify experiment name to plot
        -fmt [svg,jpg,png,pdf] set figure format [default is svg]
        -sav save figure and quit

    DEFAULTS
         FILE: magic_measurements.txt
         IND: first 
         SPEC: step through one by one
    """
    cont, FTinit, BTinit, k = "", 0, 0, 0
    meas_file = "magic_measurements.txt"
    spec = ""
    Tind, cont = 0, ""
    EXP = ""
    fmt = 'svg'  # default image type for saving
    plot = 0
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-i' in sys.argv:
        file = raw_input(
            "Input magic_measurements file name? [magic_measurements.txt]  ")
        if file != "": meas_file = file
    if '-e' in sys.argv:
        ind = sys.argv.index('-e')
        EXP = sys.argv[ind + 1]
    if '-f' in sys.argv:
        ind = sys.argv.index('-f')
        meas_file = sys.argv[ind + 1]
    if '-T' in sys.argv:
        ind = sys.argv.index('-T')
        Tind = int(sys.argv[ind + 1])
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt = sys.argv[ind + 1]
    if '-sav' in sys.argv: plot = 1
    #
    meas_data, file_type = pmag.magic_read(meas_file)
    #
    # get list of unique experiment names
    #
    # initialize some variables (a continuation flag, plot initialization flags and the experiment counter
    experiment_names = []
    for rec in meas_data:
        if rec['magic_experiment_name'] not in experiment_names:
            experiment_names.append(rec['magic_experiment_name'])
    #
    # hunt through by experiment name
    if EXP != "":
        try:
            k = experiment_names.index(EXP)
        except:
            print "Bad experiment name"
            sys.exit()
    while k < len(experiment_names):
        e = experiment_names[k]
        if EXP == "": print e, k + 1, 'out of ', len(experiment_names)
        #
        #  initialize lists of data, susceptibility, temperature, frequency and field
        X, T, F, B = [], [], [], []
        for rec in meas_data:
            methcodes = rec['magic_method_codes']
            meths = methcodes.strip().split(':')
            if rec['magic_experiment_name'] == e and "LP-X" in meths:  # looking for chi measurement
                if 'measurement_temp' not in rec.keys():
                    rec['measurement_temp'] = '300'  # set defaults
                if 'measurement_freq' not in rec.keys():
                    rec['measurement_freq'] = '0'  # set defaults
                if 'measurement_lab_field_ac' not in rec.keys():
                    rec['measurement_lab_field_ac'] = '0'  # set default
                X.append(float(rec['measurement_x']))
                T.append(float(rec['measurement_temp']))
                F.append(float(rec['measurement_freq']))
                B.append(float(rec['measurement_lab_field_ac']))
    #
    # get unique list of Ts,Fs, and Bs
    #
        Ts, Fs, Bs = [], [], []
        for k in range(len(X)):  # hunt through all the measurements
            if T[k] not in Ts: Ts.append(T[k])  # append if not in list
            if F[k] not in Fs: Fs.append(F[k])
            if B[k] not in Bs: Bs.append(B[k])
        Ts.sort()  # sort list of temperatures, frequencies and fields
        Fs.sort()
        Bs.sort()
        if '-x' in sys.argv:
            k = len(experiment_names) + 1  # just plot the one
        else:
            k += 1  # increment experiment number
    #
    # plot chi versus T and F holding B constant
    #
        plotnum = 1  # initialize plot number to 1
        if len(X) > 2:  # if there are any data to plot, continue
            b = Bs[-1]  # keeping field constant and at maximum
            XTF = []  # initialize list of chi versus Temp and freq
            for f in Fs:  # step through frequencies sequentially
                XT = []  # initialize list of chi versus temp
                for kk in range(len(X)):  # hunt through all the data
                    if F[kk] == f and B[
                            kk] == b:  # select data with given freq and field
                        XT.append([X[kk], T[kk]])  # append to list
                XTF.append(XT)  # append list to list of frequencies
            if len(XT) > 1:  # if there are any temperature dependent data
                pmagplotlib.plot_init(plotnum, 5, 5)  # initialize plot
                pmagplotlib.plotXTF(plotnum, XTF, Fs, e,
                                    b)  # call the plotting function
                if plot == 0:
                    pmagplotlib.drawFIGS({'fig': plotnum})  #make it visible
                plotnum += 1  # increment plot number
            f = Fs[0]  # set frequency to minimum
            XTB = []  # initialize list if chi versus Temp and field
            for b in Bs:  # step through field values
                XT = []  # initial chi versus temp list for this field
                for kk in range(len(X)):  # hunt through all the data
                    if F[kk] == f and B[
                            kk] == b:  # select data with given freq and field
                        XT.append([X[kk], T[kk]])  # append to list
                XTB.append(XT)
            if len(XT) > 1:  # if there are any temperature dependent data
                pmagplotlib.plot_init(plotnum, 5, 5)  # set up plot
                pmagplotlib.plotXTB(plotnum, XTB, Bs, e,
                                    f)  # call the plotting function
                if plot == 0: pmagplotlib.drawFIGS({'fig': plotnum})
                plotnum += 1  # increment plot number
            if '-i' in sys.argv:
                for ind in range(
                        len(Ts)):  # print list of temperatures available
                    print ind, int(Ts[ind])
                cont = raw_input(
                    "Enter index of desired temperature step, s[a]ve plots, [return] to quit "
                )
                if cont == 'a':
                    files = {}
                    PLTS = {}
                    for p in range(1, plotnum):
                        key = str(p)
                        files[key] = e + '_' + key + '.' + fmt
                        PLTS[key] = key
                    pmagplotlib.saveP(PLTS, files)
                    cont = raw_input(
                        "Enter index of desired temperature step, s[a]ve plots, [return] to quit "
                    )
                if cont == "": cont = 'q'
            while cont != "q":
                if '-i' in sys.argv: Tind = int(cont)  # set temperature index
                b = Bs[-1]  # set field to max available
                XF = []  # initial chi versus frequency list
                for kk in range(len(X)):  # hunt through the data
                    if T[kk] == Ts[Tind] and B[
                            kk] == b:  # if temperature and field match,
                        XF.append([X[kk], F[kk]])  # append the data
                if len(XF) > 1:  # if there are any data to plot
                    if FTinit == 0:  # if not already initialized, initialize plot
                        #print 'initializing ',plotnum
                        pmagplotlib.plot_init(plotnum, 5, 5)
                        FTinit = 1
                        XFplot = plotnum
                        plotnum += 1  # increment plotnum
                    pmagplotlib.plotXFT(XFplot, XF, Ts[Tind], e, b)
                    if plot == 0: pmagplotlib.drawFIGS({'fig': plotnum})
                else:
                    print '\n *** Skipping susceptibitily-frequency plot as a function of temperature *** \n'
                f = Fs[0]  # set frequency to minimum available
                XB = []  # initialize chi versus field list
                for kk in range(len(X)):  # hunt through the data
                    if T[kk] == Ts[Tind] and F[
                            kk] == f:  # if temperature and field match those desired
                        XB.append([X[kk], B[kk]])  # append the data to list
                if len(XB) > 4:  # if there are any data
                    if BTinit == 0:  # if plot not already initialized
                        pmagplotlib.plot_init(plotnum, 5, 5)  # do it
                        BTinit = 1
                    pmagplotlib.plotXBT(plotnum, XB, Ts[Tind], e,
                                        f)  # and call plotting function
                    if plot == 0: pmagplotlib.drawFIGS({'fig': plotnum})
                else:
                    print 'Skipping susceptibitily - AC field plot as a function of temperature'
                files = {}
                PLTS = {}
                for p in range(1, plotnum):
                    key = str(p)
                    files[key] = e + '_' + key + '.' + fmt
                    PLTS[key] = p
                if '-i' in sys.argv:
                    for ind in range(
                            len(Ts)
                    ):  # just in case you forgot, print out a new list of temperatures
                        print ind, int(Ts[ind])
                    cont = raw_input(
                        "Enter index of next temperature step, s[a]ve plots,  [return] to quit "
                    )  # ask for new temp
                    if cont == "": sys.exit()
                    if cont == 'a':
                        pmagplotlib.saveP(PLTS, files)
                        cont = raw_input(
                            "Enter index of desired temperature step, s[a]ve plots, [return] to quit "
                        )
                        if cont == "": sys.exit()
                elif plot == 0:
                    ans = raw_input(
                        "enter s[a]ve to save files,  [return] to quit ")
                    if ans == 'a':
                        pmagplotlib.saveP(PLTS, files)
                        sys.exit()
                    else:
                        sys.exit()
                else:
                    pmagplotlib.saveP(PLTS, files)
                    sys.exit()
Esempio n. 34
0
def main():
    """
    NAME
        microwave_magic.py
    
    DESCRIPTION
        plots microwave paleointensity data, allowing interactive setting of bounds.
        Saves and reads interpretations
        from a pmag_specimen formatted table, default: microwave_specimens.txt

    SYNTAX 
        microwave_magic.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f MEAS, set magic_measurements input file
        -fsp PRIOR, set pmag_specimen prior interpretations file
        -fcr CRIT, set criteria file for grading.  
        -fmt [svg,png,jpg], format for images - default is svg
        -sav,  saves plots with out review (default format)
        -spc SPEC, plots single specimen SPEC, saves plot with specified format
            with optional -b bounds adn quits
        -b BEG END: sets  bounds for calculation
           BEG: starting step for slope calculation
           END: ending step for slope calculation
        
    DEFAULTS
        MEAS: magic_measurements.txt
        CRIT: NONE
        PRIOR: microwave_specimens.txt
  
    OUTPUT 
        figures:
            ALL:  numbers refer to temperature steps in command line window
            1) Arai plot:  closed circles are zero-field first/infield
                           open circles are infield first/zero-field
                           triangles are pTRM checks
                           squares are pTRM tail checks
                           VDS is vector difference sum
                           diamonds are bounds for interpretation
            2) Zijderveld plot:  closed (open) symbols are X-Y (X-Z) planes
                                 X rotated to NRM direction
            3) (De/Re)Magnetization diagram:
                           circles are NRM remaining
                           squares are pTRM gained
        command line window:
            list is: temperature step numbers, power (J), Dec, Inc, Int (units of magic_measuements)
                     list of possible commands: type letter followed by return to select option
                     saving of plots creates .svg format files with specimen_name, plot type as name
    """
    #
    #   initializations
    #
    meas_file, critout, inspec = "magic_measurements.txt", "", "microwave_specimens.txt"
    inlt = 0
    version_num = pmag.get_version()
    Tinit, DCZ, field, first_save = 0, 0, -1, 1
    user, comment = "", ''
    ans, specimen, recnum, start, end = 0, 0, 0, 0, 0
    plots, pmag_out, samp_file, style = 0, "", "", "svg"
    fmt = '.' + style
    #
    # default acceptance criteria
    #
    accept_keys = [
        'specimen_int_ptrm_n', 'specimen_md', 'specimen_fvds',
        'specimen_b_beta', 'specimen_dang', 'specimen_drats', 'specimen_Z'
    ]
    accept = {}
    accept['specimen_int_ptrm_n'] = 2
    accept['specimen_md'] = 10
    accept['specimen_fvds'] = 0.35
    accept['specimen_b_beta'] = .1
    accept['specimen_int_mad'] = 7
    accept['specimen_dang'] = 10
    accept['specimen_drats'] = 10
    accept['specimen_Z'] = 10
    #
    # parse command line options
    #
    spc, BEG, END = "", "", ""
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-f' in sys.argv:
        ind = sys.argv.index('-f')
        meas_file = sys.argv[ind + 1]
    if '-fsp' in sys.argv:
        ind = sys.argv.index('-fsp')
        inspec = sys.argv[ind + 1]
    if '-fcr' in sys.argv:
        ind = sys.argv.index('-fcr')
        critout = sys.argv[ind + 1]
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt = '.' + sys.argv[ind + 1]
    if '-spc' in sys.argv:
        ind = sys.argv.index('-spc')
        spc = sys.argv[ind + 1]
        if '-b' in sys.argv:
            ind = sys.argv.index('-b')
            BEG = int(sys.argv[ind + 1])
            END = int(sys.argv[ind + 2])
    if critout != "":
        crit_data, file_type = pmag.magic_read(critout)
        if pmagplotlib.verbose:
            print "Acceptance criteria read in from ", critout
        accept = {}
        accept['specimen_int_ptrm_n'] = 2.0
        for critrec in crit_data:
            if critrec["pmag_criteria_code"] == "IE-SPEC":
                for key in accept_keys:
                    if key not in critrec.keys():
                        accept[key] = -1
                    else:
                        accept[key] = float(critrec[key])
    try:
        open(inspec, 'rU')
        PriorRecs, file_type = pmag.magic_read(inspec)
        if file_type != 'pmag_specimens':
            print file_type
            print file_type, inspec, " is not a valid pmag_specimens file "
            sys.exit()
        for rec in PriorRecs:
            if 'magic_software_packages' not in rec.keys():
                rec['magic_software_packages'] = ""
    except IOError:
        PriorRecs = []
        if pmagplotlib.verbose:
            print "starting new specimen interpretation file: ", inspec
    meas_data, file_type = pmag.magic_read(meas_file)
    if file_type != 'magic_measurements':
        print file_type
        print file_type, "This is not a valid magic_measurements file "
        sys.exit()
    backup = 0
    # define figure numbers for arai, zijderveld and
    #   de-,re-magization diagrams
    AZD = {}
    AZD['deremag'], AZD['zijd'], AZD['arai'], AZD['eqarea'] = 1, 2, 3, 4
    pmagplotlib.plot_init(AZD['arai'], 4, 4)
    pmagplotlib.plot_init(AZD['zijd'], 4, 4)
    pmagplotlib.plot_init(AZD['deremag'], 4, 4)
    pmagplotlib.plot_init(AZD['eqarea'], 4, 4)
    #
    #
    #
    # get list of unique specimen names
    #
    CurrRec = []
    sids = pmag.get_specs(meas_data)
    # get plots for specimen s - default is just to step through arai diagrams
    #
    if spc != "": specimen = sids.index(spc)
    while specimen < len(sids):
        methcodes = []
        if pmagplotlib.verbose and spc != "":
            print sids[specimen], specimen + 1, 'of ', len(sids)
        MeasRecs = []
        s = sids[specimen]
        datablock, trmblock = [], []
        PmagSpecRec = {}
        PmagSpecRec["er_analyst_mail_names"] = user
        PmagSpecRec["specimen_correction"] = 'u'
        #
        # find the data from the meas_data file for this specimen
        #
        for rec in meas_data:
            if rec["er_specimen_name"] == s:
                MeasRecs.append(rec)
                methods = rec["magic_method_codes"].split(":")
                meths = []
                for meth in methods:
                    meths.append(meth.strip())  # take off annoying spaces
                methods = ""
                for meth in meths:
                    if meth.strip() not in methcodes and "LP-" in meth:
                        methcodes.append(meth.strip())
                    methods = methods + meth + ":"
                methods = methods[:-1]
                rec["magic_method_codes"] = methods
                if "LP-PI-M" in meths: datablock.append(rec)
                if "LP-MRM" in meths: trmblock.append(rec)
        if len(trmblock) > 2 and inspec != "":
            if Tinit == 0:
                Tinit = 1
                AZD['MRM'] = 4
                pmagplotlib.plot_init(AZD['MRM'], 4, 4)
            elif Tinit == 1:
                pmagplotlib.clearFIG(AZD['MRM'])
        if len(datablock) < 4:
            if backup == 0:
                specimen += 1
                if pmagplotlib.verbose:
                    print 'skipping specimen - moving forward ', s
            else:
                specimen -= 1
                if pmagplotlib.verbose:
                    print 'skipping specimen - moving backward ', s
    #
    #  collect info for the PmagSpecRec dictionary
    #
        else:
            rec = datablock[0]
            PmagSpecRec["er_citation_names"] = "This study"
            PmagSpecRec["er_specimen_name"] = s
            PmagSpecRec["er_sample_name"] = rec["er_sample_name"]
            PmagSpecRec["er_site_name"] = rec["er_site_name"]
            PmagSpecRec["er_location_name"] = rec["er_location_name"]
            if "magic_instrument_codes" not in rec.keys():
                rec["magic_instrument_codes"] = ""
            PmagSpecRec["magic_instrument_codes"] = rec[
                "magic_instrument_codes"]
            PmagSpecRec["measurement_step_unit"] = "J"
            if "magic_experiment_name" not in rec.keys():
                rec["magic_experiment_name"] = ""
            else:
                PmagSpecRec["magic_experiment_names"] = rec[
                    "magic_experiment_name"]

            meths = rec["magic_method_codes"].split(':')
            # sort data into types
            if "LP-PI-M-D" in meths:  # this is a double heating experiment
                exp_type = "LP-PI-M-D"
            elif "LP-PI-M-S" in meths:
                exp_type = "LP-PI-M-S"
            else:
                print "experiment type not supported yet "
                break
            araiblock, field = pmag.sortmwarai(datablock, exp_type)
            first_Z = araiblock[0]
            first_I = araiblock[1]
            GammaChecks = araiblock[-3]
            ThetaChecks = araiblock[-2]
            DeltaChecks = araiblock[-1]
            if len(first_Z) < 3:
                if backup == 0:
                    specimen += 1
                    if pmagplotlib.verbose:
                        print 'skipping specimen - moving forward ', s
                else:
                    specimen -= 1
                    if pmagplotlib.verbose:
                        print 'skipping specimen - moving backward ', s
            else:
                backup = 0
                zijdblock, units = pmag.find_dmag_rec(s, meas_data)
                if exp_type == "LP-PI-M-D":
                    recnum = 0
                    print "ZStep Watts  Dec Inc  Int"
                    for plotrec in zijdblock:
                        if pmagplotlib.verbose:
                            print '%i  %i %7.1f %7.1f %8.3e ' % (
                                recnum, plotrec[0], plotrec[1], plotrec[2],
                                plotrec[3])
                            recnum += 1
                    recnum = 1
                    if GammaChecks != "":
                        print "IStep Watts  Gamma"
                        for gamma in GammaChecks:
                            if pmagplotlib.verbose:
                                print '%i %i %7.1f ' % (recnum, gamma[0],
                                                        gamma[1])
                            recnum += 1
                if exp_type == "LP-PI-M-S":
                    if pmagplotlib.verbose:
                        print "IStep Watts  Theta"
                        kk = 0
                        for theta in ThetaChecks:
                            kk += 1
                            print '%i  %i %7.1f ' % (kk, theta[0], theta[1])
                    if pmagplotlib.verbose:
                        print "Watts  Delta"
                        for delta in DeltaChecks:
                            print '%i %7.1f ' % (delta[0], delta[1])
                pmagplotlib.plotAZ(AZD, araiblock, zijdblock, s, units[0])
                if inspec != "":
                    if pmagplotlib.verbose:
                        print 'Looking up saved interpretation....'
                    found = 0
                    for k in range(len(PriorRecs)):
                        try:
                            if PriorRecs[k]["er_specimen_name"] == s:
                                found = 1
                                CurrRec.append(PriorRecs[k])
                                for j in range(len(araiblock[0])):
                                    if float(araiblock[0][j][0]) == float(
                                            PriorRecs[k]
                                        ["measurement_step_min"]):
                                        start = j
                                    if float(araiblock[0][j][0]) == float(
                                            PriorRecs[k]
                                        ["measurement_step_max"]):
                                        end = j
                                pars, errcode = pmag.PintPars(
                                    araiblock, zijdblock, start, end)
                                pars['measurement_step_unit'] = "J"
                                del PriorRecs[
                                    k]  # put in CurrRec, take out of PriorRecs
                                if errcode != 1:
                                    pars["specimen_lab_field_dc"] = field
                                    pars["specimen_int"] = -1 * field * pars[
                                        "specimen_b"]
                                    pars["er_specimen_name"] = s
                                    if pmagplotlib.verbose:
                                        print 'Saved interpretation: '
                                    pars = pmag.scoreit(
                                        pars, PmagSpecRec, accept, '', 0)
                                    pmagplotlib.plotB(AZD, araiblock,
                                                      zijdblock, pars)
                                    if len(trmblock) > 2:
                                        blab = field
                                        best = pars["specimen_int"]
                                        Bs, TRMs = [], []
                                        for trec in trmblock:
                                            Bs.append(
                                                float(
                                                    trec['treatment_dc_field'])
                                            )
                                            TRMs.append(
                                                float(trec[
                                                    'measurement_magn_moment'])
                                            )
                                        NLpars = nlt.NLtrm(
                                            Bs, TRMs, best, blab, 0
                                        )  # calculate best fit parameters through TRM acquisition data, and get new banc
                                        Mp, Bp = [], []
                                        for k in range(int(max(Bs) * 1e6)):
                                            Bp.append(float(k) * 1e-6)
                                            npred = nlt.TRM(
                                                Bp[-1], NLpars['xopt'][0],
                                                NLpars['xopt'][1]
                                            )  # predicted NRM for this field
                                            Mp.append(npred)
                                        pmagplotlib.plotTRM(
                                            AZD['MRM'], Bs, TRMs, Bp, Mp,
                                            NLpars,
                                            trec['magic_experiment_name'])
                                        print npred
                                        print 'Banc= ', float(
                                            NLpars['banc']) * 1e6
                                        if pmagplotlib.verbose:
                                            print 'Banc= ', float(
                                                NLpars['banc']) * 1e6
                                        pmagplotlib.drawFIGS(AZD)
                                else:
                                    print 'error on specimen ', s
                        except:
                            pass
                    if pmagplotlib.verbose and found == 0:
                        print '    None found :(  '
                if spc != "":
                    if BEG != "":
                        pars, errcode = pmag.PintPars(araiblock, zijdblock,
                                                      BEG, END)
                        pars['measurement_step_unit'] = "J"
                        pars["specimen_lab_field_dc"] = field
                        pars["specimen_int"] = -1 * field * pars["specimen_b"]
                        pars["er_specimen_name"] = s
                        pars['specimen_grade'] = ''  # ungraded
                        pmagplotlib.plotB(AZD, araiblock, zijdblock, pars)
                        if len(trmblock) > 2:
                            if inlt == 0:
                                donlt()
                                inlt = 1
                            blab = field
                            best = pars["specimen_int"]
                            Bs, TRMs = [], []
                            for trec in trmblock:
                                Bs.append(float(trec['treatment_dc_field']))
                                TRMs.append(
                                    float(trec['measurement_magn_moment']))
                            NLpars = nlt.NLtrm(
                                Bs, TRMs, best, blab, 0
                            )  # calculate best fit parameters through TRM acquisition data, and get new banc
                            #
                            Mp, Bp = [], []
                            for k in range(int(max(Bs) * 1e6)):
                                Bp.append(float(k) * 1e-6)
                                npred = nlt.TRM(
                                    Bp[-1], NLpars['xopt'][0], NLpars['xopt']
                                    [1])  # predicted NRM for this field
                    files = {}
                    for key in AZD.keys():
                        files[key] = s + '_' + key + fmt
                    pmagplotlib.saveP(AZD, files)
                    sys.exit()
                if plots == 0:
                    ans = 'b'
                    while ans != "":
                        print """
               s[a]ve plot, set [b]ounds for calculation, [d]elete current interpretation, [p]revious, [s]ample, [q]uit:
               """
                        ans = raw_input('Return for next specimen \n')
                        if ans == "":
                            specimen += 1
                        if ans == "d":
                            save_redo(PriorRecs, inspec)
                            CurrRec = []
                            pmagplotlib.plotAZ(AZD, araiblock, zijdblock, s,
                                               units[0])
                            pmagplotlib.drawFIGS(AZD)
                        if ans == 'a':
                            files = {}
                            for key in AZD.keys():
                                files[key] = s + '_' + key + fmt
                            pmagplotlib.saveP(AZD, files)
                            ans = ""
                        if ans == 'q':
                            print "Good bye"
                            sys.exit()
                        if ans == 'p':
                            specimen = specimen - 1
                            backup = 1
                            ans = ""
                        if ans == 's':
                            keepon = 1
                            spec = raw_input(
                                'Enter desired specimen name (or first part there of): '
                            )
                            while keepon == 1:
                                try:
                                    specimen = sids.index(spec)
                                    keepon = 0
                                except:
                                    tmplist = []
                                    for qq in range(len(sids)):
                                        if spec in sids[qq]:
                                            tmplist.append(sids[qq])
                                    print specimen, " not found, but this was: "
                                    print tmplist
                                    spec = raw_input(
                                        'Select one or try again\n ')
                            ans = ""
                        if ans == 'b':
                            if end == 0 or end >= len(araiblock[0]):
                                end = len(araiblock[0]) - 1
                            GoOn = 0
                            while GoOn == 0:
                                print 'Enter index of first point for calculation: ', '[', start, ']'
                                answer = raw_input('return to keep default  ')
                                if answer != "": start = int(answer)
                                print 'Enter index  of last point for calculation: ', '[', end, ']'
                                answer = raw_input('return to keep default  ')
                                if answer != "":
                                    end = int(answer)
                                if start >= 0 and start < len(araiblock[
                                        0]) - 2 and end > 0 and end < len(
                                            araiblock[0]) and start < end:
                                    GoOn = 1
                                else:
                                    print "Bad endpoints - try again! "
                                    start, end = 0, len(araiblock)
                            s = sids[specimen]
                            pars, errcode = pmag.PintPars(
                                araiblock, zijdblock, start, end)
                            pars['measurement_step_unit'] = "J"
                            pars["specimen_lab_field_dc"] = field
                            pars["specimen_int"] = -1 * field * pars[
                                "specimen_b"]
                            pars["er_specimen_name"] = s
                            pars = pmag.scoreit(pars, PmagSpecRec, accept, '',
                                                0)
                            PmagSpecRec["measurement_step_min"] = '%8.3e' % (
                                pars["measurement_step_min"])
                            PmagSpecRec["measurement_step_max"] = '%8.3e' % (
                                pars["measurement_step_max"])
                            PmagSpecRec["measurement_step_unit"] = "J"
                            PmagSpecRec["specimen_int_n"] = '%i' % (
                                pars["specimen_int_n"])
                            PmagSpecRec["specimen_lab_field_dc"] = '%8.3e' % (
                                pars["specimen_lab_field_dc"])
                            PmagSpecRec["specimen_int"] = '%8.3e ' % (
                                pars["specimen_int"])
                            PmagSpecRec["specimen_b"] = '%5.3f ' % (
                                pars["specimen_b"])
                            PmagSpecRec["specimen_q"] = '%5.1f ' % (
                                pars["specimen_q"])
                            PmagSpecRec["specimen_f"] = '%5.3f ' % (
                                pars["specimen_f"])
                            PmagSpecRec["specimen_fvds"] = '%5.3f' % (
                                pars["specimen_fvds"])
                            PmagSpecRec["specimen_b_beta"] = '%5.3f' % (
                                pars["specimen_b_beta"])
                            PmagSpecRec["specimen_int_mad"] = '%7.1f' % (
                                pars["specimen_int_mad"])
                            PmagSpecRec["specimen_Z"] = '%7.1f' % (
                                pars["specimen_Z"])
                            if pars["method_codes"] != "":
                                tmpcodes = pars["method_codes"].split(":")
                                for t in tmpcodes:
                                    if t.strip() not in methcodes:
                                        methcodes.append(t.strip())
                            PmagSpecRec["specimen_dec"] = '%7.1f' % (
                                pars["specimen_dec"])
                            PmagSpecRec["specimen_inc"] = '%7.1f' % (
                                pars["specimen_inc"])
                            PmagSpecRec["specimen_tilt_correction"] = '-1'
                            PmagSpecRec["specimen_direction_type"] = 'l'
                            PmagSpecRec[
                                "direction_type"] = 'l'  # this is redudant, but helpful - won't be imported
                            PmagSpecRec["specimen_dang"] = '%7.1f ' % (
                                pars["specimen_dang"])
                            PmagSpecRec["specimen_drats"] = '%7.1f ' % (
                                pars["specimen_drats"])
                            PmagSpecRec["specimen_int_ptrm_n"] = '%i ' % (
                                pars["specimen_int_ptrm_n"])
                            PmagSpecRec["specimen_rsc"] = '%6.4f ' % (
                                pars["specimen_rsc"])
                            PmagSpecRec["specimen_md"] = '%i ' % (int(
                                pars["specimen_md"]))
                            if PmagSpecRec["specimen_md"] == '-1':
                                PmagSpecRec["specimen_md"] = ""
                            PmagSpecRec["specimen_b_sigma"] = '%5.3f ' % (
                                pars["specimen_b_sigma"])
                            if "IE-TT" not in methcodes:
                                methcodes.append("IE-TT")
                            methods = ""
                            for meth in methcodes:
                                methods = methods + meth + ":"
                            PmagSpecRec["magic_method_codes"] = methods[:-1]
                            PmagSpecRec["specimen_description"] = comment
                            PmagSpecRec[
                                "magic_software_packages"] = version_num
                            pmagplotlib.plotAZ(AZD, araiblock, zijdblock, s,
                                               units[0])
                            pmagplotlib.plotB(AZD, araiblock, zijdblock, pars)
                            if len(trmblock) > 2:
                                blab = field
                                best = pars["specimen_int"]
                                Bs, TRMs = [], []
                                for trec in trmblock:
                                    Bs.append(float(
                                        trec['treatment_dc_field']))
                                    TRMs.append(
                                        float(trec['measurement_magn_moment']))
                                NLpars = nlt.NLtrm(
                                    Bs, TRMs, best, blab, 0
                                )  # calculate best fit parameters through TRM acquisition data, and get new banc
                                Mp, Bp = [], []
                                for k in range(int(max(Bs) * 1e6)):
                                    Bp.append(float(k) * 1e-6)
                                    npred = nlt.TRM(
                                        Bp[-1], NLpars['xopt'][0],
                                        NLpars['xopt']
                                        [1])  # predicted NRM for this field
                                    Mp.append(npred)
                                pmagplotlib.plotTRM(
                                    AZD['MRM'], Bs, TRMs, Bp, Mp, NLpars,
                                    trec['magic_experiment_name'])
                                print 'Banc= ', float(NLpars['banc']) * 1e6
                            pmagplotlib.drawFIGS(AZD)
                            pars["specimen_lab_field_dc"] = field
                            pars["specimen_int"] = -1 * field * pars[
                                "specimen_b"]
                            saveit = raw_input(
                                "Save this interpretation? [y]/n \n")
                            if saveit != 'n':
                                specimen += 1
                                PriorRecs.append(
                                    PmagSpecRec)  # put back an interpretation
                                save_redo(PriorRecs, inspec)
                            ans = ""
                else:
                    specimen += 1
                    if fmt != ".pmag":
                        basename = s + '_microwave' + fmt
                        files = {}
                        for key in AZD.keys():
                            files[key] = s + '_' + key + fmt
                        if pmagplotlib.isServer:
                            black = '#000000'
                            purple = '#800080'
                            titles = {}
                            titles['deremag'] = 'DeReMag Plot'
                            titles['zijd'] = 'Zijderveld Plot'
                            titles['arai'] = 'Arai Plot'
                            AZD = pmagplotlib.addBorders(
                                AZD, titles, black, purple)
                        pmagplotlib.saveP(AZD, files)
    #                   pmagplotlib.combineFigs(s,files,3)
        if len(CurrRec) > 0:
            for rec in CurrRec:
                PriorRecs.append(rec)
        CurrRec = []
    if plots != 1:
        ans = raw_input(" Save last plot? 1/[0] ")
        if ans == "1":
            if fmt != ".pmag":
                files = {}
                for key in AZD.keys():
                    files[key] = s + '_' + key + fmt
                pmagplotlib.saveP(AZD, files)
        if len(CurrRec) > 0:
            PriorRecs.append(CurrRec)  # put back an interpretation
        if len(PriorRecs) > 0:
            save_redo(PriorRecs, inspec)
            print 'Updated interpretations saved in ', inspec
    if pmagplotlib.verbose:
        print "Good bye"
Esempio n. 35
0
def main():
    """
    NAME
        eqarea_magic.py

    DESCRIPTION
       makes equal area projections from declination/inclination data

    SYNTAX
        eqarea_magic.py [command line options]

    INPUT
       takes magic formatted sites, samples, specimens, or measurements

    OPTIONS
        -h prints help message and quits
        -f FILE: specify input magic format file from magic, default='sites.txt'
         supported types=[measurements, specimens, samples, sites]
        -fsp FILE: specify specimen file name, (required if you want to plot measurements by sample)
                default='specimens.txt'
        -fsa FILE: specify sample file name, (required if you want to plot specimens by site)
                default='samples.txt'
        -fsi FILE: specify site file name, default='sites.txt'

        -obj OBJ: specify  level of plot  [all, sit, sam, spc], default is all
        -crd [s,g,t]: specify coordinate system, [s]pecimen, [g]eographic, [t]ilt adjusted
                default is geographic, unspecified assumed geographic
        -fmt [svg,png,jpg] format for output plots
        -ell [F,K,B,Be,Bv] plot Fisher, Kent, Bingham, Bootstrap ellipses or Boostrap eigenvectors
        -c plot as colour contour
        -sav save plot and quit quietly
    NOTE
        all: entire file; sit: site; sam: sample; spc: specimen
    """
    # initialize some default variables
    FIG = {} # plot dictionary
    FIG['eqarea'] = 1 # eqarea is figure 1
    plotE = 0
    plt = 0  # default to not plotting
    verbose = pmagplotlib.verbose
    # extract arguments from sys.argv
    if '-h' in sys.argv:
        print(main.__doc__)
        sys.exit()
    dir_path = pmag.get_named_arg_from_sys("-WD", default_val=os.getcwd())
    pmagplotlib.plot_init(FIG['eqarea'],5,5)
    in_file = pmag.get_named_arg_from_sys("-f", default_val="sites.txt")
    full_in_file = os.path.join(dir_path, in_file)
    plot_by = pmag.get_named_arg_from_sys("-obj", default_val="all").lower()
    spec_file = pmag.get_named_arg_from_sys("-fsp", default_val="specimens.txt")
    samp_file = pmag.get_named_arg_from_sys("-fsa", default_val="samples.txt")
    site_file = pmag.get_named_arg_from_sys("-fsi", default_val="sites.txt")
    if plot_by == 'all':
        plot_key = 'all'
    elif plot_by == 'sit':
        plot_key = 'site'
    elif plot_by == 'sam':
        plot_key = 'sample'
    elif plot_by == 'spc':
        plot_key = 'specimen'
    else:
        plot_key = 'all'
    if '-c' in sys.argv:
        contour = 1
    else:
        contour = 0
    if '-sav' in sys.argv:
        plt = 1
        verbose = 0
    if '-ell' in sys.argv:
        plotE = 1
        ind = sys.argv.index('-ell')
        ell_type = sys.argv[ind+1]
        ell_type = pmag.get_named_arg_from_sys("-ell", "F")
        dist = ell_type.upper()
        # if dist type is unrecognized, use Fisher
        if dist not in ['F', 'K', 'B', 'BE', 'BV']:
            dist = 'F'
        if dist == "BV":
            FIG['bdirs'] = 2
            pmagplotlib.plot_init(FIG['bdirs'],5,5)
    crd = pmag.get_named_arg_from_sys("-crd", default_val="g")
    if crd == "s":
        coord = "-1"
    elif crd == "t":
        coord = "100"
    else:
        coord = "0"

    fmt = pmag.get_named_arg_from_sys("-fmt", "svg")

    dec_key = 'dir_dec'
    inc_key = 'dir_inc'
    tilt_key = 'dir_tilt_correction'
    #Dir_type_keys=['','site_direction_type','sample_direction_type','specimen_direction_type']

    #
    fnames = {"specimens": spec_file, "samples": samp_file, 'sites': site_file}
    contribution = nb.Contribution(dir_path, custom_filenames=fnames,
                                   single_file=in_file)
    # the object that contains the DataFrame + useful helper methods:
    table_name = list(contribution.tables.keys())[0]
    data_container = contribution.tables[table_name]
    # the actual DataFrame:
    data = data_container.df

    # uses sample infile to add temporary site_name
    # column to the specimen table



    data_container = contribution.tables[table_name]
    data = data_container.df

    if (plot_key != "all") and (plot_key not in data.columns):
        contribution.propagate_location_to_measurements()
        contribution.propagate_location_to_specimens()

    # add tilt key into DataFrame columns if it isn't there already
    if tilt_key not in data.columns:
        data.loc[:, tilt_key] = None

    if verbose:
        print(len(data), ' records read from ', in_file)

    # find desired dec,inc data:
    dir_type_key = ''
    #
    # get plotlist if not plotting all records
    #
    plotlist=[]
    if plot_key != "all":
        # return all where plot_key is not blank
        if plot_key not in data.columns:
            print('Can\'t plot by "{}".  That header is not in infile: {}'.format(plot_key, in_file))
            return
        plots = data[data[plot_key].notnull()]
        plotlist = plots[plot_key].unique() # grab unique values
    else:
        plotlist.append('All')

    for plot in plotlist:
        if verbose:
            print(plot)
        if plot == 'All':
            # plot everything at once
            plot_data = data
        else:
            # pull out only partial data
            plot_data = data[data[plot_key] == plot]

        DIblock = []
        GCblock = []
        # SLblock, SPblock = [], []
        title = plot
        mode = 1
        k = 0


        if dec_key not in plot_data.columns:
            print("-W- No dec/inc data")
            continue
        # get all records where dec & inc values exist
        plot_data = plot_data[plot_data[dec_key].notnull() & plot_data[inc_key].notnull()]
        if plot_data.empty:
            continue
        # this sorting out is done in get_di_bock
        #if coord == '0':  # geographic, use records with no tilt key (or tilt_key 0)
        #    cond1 = plot_data[tilt_key].fillna('') == coord
        #    cond2 = plot_data[tilt_key].isnull()
        #    plot_data = plot_data[cond1 | cond2]
        #else:  # not geographic coordinates, use only records with correct tilt_key
        #    plot_data = plot_data[plot_data[tilt_key] == coord]

        # get metadata for naming the plot file
        locations = data_container.get_name('location', df_slice=plot_data)
        site = data_container.get_name('site', df_slice=plot_data)
        sample = data_container.get_name('sample', df_slice=plot_data)
        specimen = data_container.get_name('specimen', df_slice=plot_data)

        # make sure method_codes is in plot_data
        if 'method_codes' not in plot_data.columns:
            plot_data['method_codes'] = ''

        # get data blocks
        DIblock = data_container.get_di_block(df_slice=plot_data,
                                              tilt_corr=coord, excl=['DE-BFP'])
        #SLblock = [[ind, row['method_codes']] for ind, row in plot_data.iterrows()]
        # get great circles
        great_circle_data = data_container.get_records_for_code('DE-BFP', incl=True,
                                                                use_slice=True, sli=plot_data)

        if len(great_circle_data) > 0:
            gc_cond = great_circle_data[tilt_key] == coord
            GCblock = [[float(row[dec_key]), float(row[inc_key])] for ind, row in great_circle_data[gc_cond].iterrows()]
            #SPblock = [[ind, row['method_codes']] for ind, row in great_circle_data[gc_cond].iterrows()]

        if len(DIblock) > 0:
            if contour == 0:
                pmagplotlib.plotEQ(FIG['eqarea'], DIblock, title)
            else:
                pmagplotlib.plotEQcont(FIG['eqarea'], DIblock)
        else:
            pmagplotlib.plotNET(FIG['eqarea'])
        if len(GCblock)>0:
            for rec in GCblock:
                pmagplotlib.plotC(FIG['eqarea'], rec, 90., 'g')
        if len(DIblock) == 0 and len(GCblock) == 0:
            if verbose:
                print("no records for plotting")
            continue
            #sys.exit()
        if plotE == 1:
            ppars = pmag.doprinc(DIblock) # get principal directions
            nDIs, rDIs, npars, rpars = [], [], [], []
            for rec in DIblock:
                angle=pmag.angle([rec[0],rec[1]],[ppars['dec'],ppars['inc']])
                if angle>90.:
                    rDIs.append(rec)
                else:
                    nDIs.append(rec)
            if dist=='B': # do on whole dataset
                etitle="Bingham confidence ellipse"
                bpars=pmag.dobingham(DIblock)
                for key in list(bpars.keys()):
                    if key!='n' and verbose: print("    ",key, '%7.1f'%(bpars[key]))
                    if key=='n' and verbose: print("    ",key, '       %i'%(bpars[key]))
                npars.append(bpars['dec'])
                npars.append(bpars['inc'])
                npars.append(bpars['Zeta'])
                npars.append(bpars['Zdec'])
                npars.append(bpars['Zinc'])
                npars.append(bpars['Eta'])
                npars.append(bpars['Edec'])
                npars.append(bpars['Einc'])
            if dist=='F':
                etitle="Fisher confidence cone"
                if len(nDIs)>2:
                    fpars=pmag.fisher_mean(nDIs)
                    for key in list(fpars.keys()):
                        if key!='n' and verbose: print("    ",key, '%7.1f'%(fpars[key]))
                        if key=='n' and verbose: print("    ",key, '       %i'%(fpars[key]))
                    mode+=1
                    npars.append(fpars['dec'])
                    npars.append(fpars['inc'])
                    npars.append(fpars['alpha95']) # Beta
                    npars.append(fpars['dec'])
                    isign=old_div(abs(fpars['inc']),fpars['inc'])
                    npars.append(fpars['inc']-isign*90.) #Beta inc
                    npars.append(fpars['alpha95']) # gamma
                    npars.append(fpars['dec']+90.) # Beta dec
                    npars.append(0.) #Beta inc
                if len(rDIs)>2:
                    fpars=pmag.fisher_mean(rDIs)
                    if verbose: print("mode ",mode)
                    for key in list(fpars.keys()):
                        if key!='n' and verbose: print("    ",key, '%7.1f'%(fpars[key]))
                        if key=='n' and verbose: print("    ",key, '       %i'%(fpars[key]))
                    mode+=1
                    rpars.append(fpars['dec'])
                    rpars.append(fpars['inc'])
                    rpars.append(fpars['alpha95']) # Beta
                    rpars.append(fpars['dec'])
                    isign=old_div(abs(fpars['inc']),fpars['inc'])
                    rpars.append(fpars['inc']-isign*90.) #Beta inc
                    rpars.append(fpars['alpha95']) # gamma
                    rpars.append(fpars['dec']+90.) # Beta dec
                    rpars.append(0.) #Beta inc
            if dist=='K':
                etitle="Kent confidence ellipse"
                if len(nDIs)>3:
                    kpars=pmag.dokent(nDIs,len(nDIs))
                    if verbose: print("mode ",mode)
                    for key in list(kpars.keys()):
                        if key!='n' and verbose: print("    ",key, '%7.1f'%(kpars[key]))
                        if key=='n' and verbose: print("    ",key, '       %i'%(kpars[key]))
                    mode+=1
                    npars.append(kpars['dec'])
                    npars.append(kpars['inc'])
                    npars.append(kpars['Zeta'])
                    npars.append(kpars['Zdec'])
                    npars.append(kpars['Zinc'])
                    npars.append(kpars['Eta'])
                    npars.append(kpars['Edec'])
                    npars.append(kpars['Einc'])
                if len(rDIs)>3:
                    kpars=pmag.dokent(rDIs,len(rDIs))
                    if verbose: print("mode ",mode)
                    for key in list(kpars.keys()):
                        if key!='n' and verbose: print("    ",key, '%7.1f'%(kpars[key]))
                        if key=='n' and verbose: print("    ",key, '       %i'%(kpars[key]))
                    mode+=1
                    rpars.append(kpars['dec'])
                    rpars.append(kpars['inc'])
                    rpars.append(kpars['Zeta'])
                    rpars.append(kpars['Zdec'])
                    rpars.append(kpars['Zinc'])
                    rpars.append(kpars['Eta'])
                    rpars.append(kpars['Edec'])
                    rpars.append(kpars['Einc'])
            else: # assume bootstrap
                if dist=='BE':
                    if len(nDIs)>5:
                        BnDIs=pmag.di_boot(nDIs)
                        Bkpars=pmag.dokent(BnDIs,1.)
                        if verbose: print("mode ",mode)
                        for key in list(Bkpars.keys()):
                            if key!='n' and verbose: print("    ",key, '%7.1f'%(Bkpars[key]))
                            if key=='n' and verbose: print("    ",key, '       %i'%(Bkpars[key]))
                        mode+=1
                        npars.append(Bkpars['dec'])
                        npars.append(Bkpars['inc'])
                        npars.append(Bkpars['Zeta'])
                        npars.append(Bkpars['Zdec'])
                        npars.append(Bkpars['Zinc'])
                        npars.append(Bkpars['Eta'])
                        npars.append(Bkpars['Edec'])
                        npars.append(Bkpars['Einc'])
                    if len(rDIs)>5:
                        BrDIs=pmag.di_boot(rDIs)
                        Bkpars=pmag.dokent(BrDIs,1.)
                        if verbose: print("mode ",mode)
                        for key in list(Bkpars.keys()):
                            if key!='n' and verbose: print("    ",key, '%7.1f'%(Bkpars[key]))
                            if key=='n' and verbose: print("    ",key, '       %i'%(Bkpars[key]))
                        mode+=1
                        rpars.append(Bkpars['dec'])
                        rpars.append(Bkpars['inc'])
                        rpars.append(Bkpars['Zeta'])
                        rpars.append(Bkpars['Zdec'])
                        rpars.append(Bkpars['Zinc'])
                        rpars.append(Bkpars['Eta'])
                        rpars.append(Bkpars['Edec'])
                        rpars.append(Bkpars['Einc'])
                    etitle="Bootstrapped confidence ellipse"
                elif dist=='BV':
                    sym={'lower':['o','c'],'upper':['o','g'],'size':3,'edgecolor':'face'}
                    if len(nDIs)>5:
                        BnDIs=pmag.di_boot(nDIs)
                        pmagplotlib.plotEQsym(FIG['bdirs'],BnDIs,'Bootstrapped Eigenvectors', sym)
                    if len(rDIs)>5:
                        BrDIs=pmag.di_boot(rDIs)
                        if len(nDIs)>5:  # plot on existing plots
                            pmagplotlib.plotDIsym(FIG['bdirs'],BrDIs,sym)
                        else:
                            pmagplotlib.plotEQ(FIG['bdirs'],BrDIs,'Bootstrapped Eigenvectors')
            if dist=='B':
                if len(nDIs)> 3 or len(rDIs)>3: pmagplotlib.plotCONF(FIG['eqarea'],etitle,[],npars,0)
            elif len(nDIs)>3 and dist!='BV':
                pmagplotlib.plotCONF(FIG['eqarea'],etitle,[],npars,0)
                if len(rDIs)>3:
                    pmagplotlib.plotCONF(FIG['eqarea'],etitle,[],rpars,0)
            elif len(rDIs)>3 and dist!='BV':
                pmagplotlib.plotCONF(FIG['eqarea'],etitle,[],rpars,0)

        for key in list(FIG.keys()):
            files = {}
            filename = pmag.get_named_arg_from_sys('-fname')
            if filename: # use provided filename
                filename+= '.' + fmt
            elif pmagplotlib.isServer: # use server plot naming convention
                filename='LO:_'+locations+'_SI:_'+site+'_SA:_'+sample+'_SP:_'+specimen+'_CO:_'+crd+'_TY:_'+key+'_.'+fmt
            else: # use more readable naming convention
                filename = ''
                for item in [locations, site, sample, specimen, crd, key]:
                    if item:
                        item = item.replace(' ', '_')
                        filename += item + '_'
                if filename.endswith('_'):
                    filename = filename[:-1]
                filename += ".{}".format(fmt)

            files[key]=filename

        if pmagplotlib.isServer:
            black     = '#000000'
            purple    = '#800080'
            titles={}
            titles['eq']='Equal Area Plot'
            FIG = pmagplotlib.addBorders(FIG,titles,black,purple)
            pmagplotlib.saveP(FIG,files)

        if plt:
            pmagplotlib.saveP(FIG,files)
            continue
        if verbose:
            pmagplotlib.drawFIGS(FIG)
            ans=input(" S[a]ve to save plot, [q]uit, Return to continue:  ")
            if ans == "q":
                sys.exit()
            if ans == "a":
                pmagplotlib.saveP(FIG,files)
        continue
Esempio n. 36
0
def main():
    """
    NAME
        plot_geomagia.py

    DESCRIPTION
        makes a map  and VADM plot of geomagia download file 

    SYNTAX
        plot_geomagia.py  [command line options]

    OPTIONS
        -h prints help message and quits
        -f FILE, specify geomagia download file
        -res [c,l,i,h] specify resolution (crude,low,intermediate,high)
        -etp plot the etopo20 topographic mesh
        -pad [LAT LON]  pad bounding box by LAT/LON  (default is [.5 .5] degrees)
        -grd SPACE specify grid spacing
        -prj [lcc] , specify projection (lcc=lambert conic conformable), default is mercator
        -o color ocean blue/land green (default is not)
        -d plot details of rivers, boundaries, etc.
        -sav save plot and quit quietly
        -fmt [png,svg,eps,jpg,pdf] specify format for output, default is pdf
    DEFAULTS
        resolution: intermediate
        saved images are in pdf
    """
    dir_path='.'
    names,res,proj,locs,padlon,padlat,fancy,gridspace,details=[],'l','lcc','',0,0,0,15,1
    Age_bounds=[-5000,2000]
    Lat_bounds=[20,45]
    Lon_bounds=[15,55]
    fmt='pdf'
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-f' in sys.argv:
        ind = sys.argv.index('-f')
        sites_file=sys.argv[ind+1]
    if '-res' in sys.argv:
        ind = sys.argv.index('-res')
        res=sys.argv[ind+1]
    if '-etp' in sys.argv:fancy=1
    if '-o' in sys.argv:ocean=1
    if '-d' in sys.argv:details=1
    if '-prj' in sys.argv:
        ind = sys.argv.index('-prj')
        proj=sys.argv[ind+1]
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt=sys.argv[ind+1]
    verbose=pmagplotlib.verbose
    if '-sav' in sys.argv:
        verbose=0
    if '-pad' in sys.argv:
        ind = sys.argv.index('-pad')
        padlat=float(sys.argv[ind+1])
        padlon=float(sys.argv[ind+2])
    if '-grd' in sys.argv:
        ind = sys.argv.index('-grd')
        gridspace=float(sys.argv[ind+1])
    if '-WD' in sys.argv:
        ind = sys.argv.index('-WD')
        dir_path=sys.argv[ind+1]
    sites_file=dir_path+'/'+sites_file
    geo_in=open(sites_file,'rU').readlines()
    Age,AgeErr,Vadm,VadmErr,slats,slons=[],[],[],[],[],[]
    for line in geo_in[2:]: # skip top two rows`
        rec=line.split()
        if float(rec[0])>Age_bounds[0] and float(rec[0])<Age_bounds[1] \
           and float(rec[12])>Lat_bounds[0] and float(rec[12]) < Lat_bounds[1]\
            and float(rec[13])>Lon_bounds[0] and float(rec[13])<Lon_bounds[1]:
            Age.append(float(rec[0]))
            AgeErr.append(float(rec[1]))
            Vadm.append(10.*float(rec[6]))
            VadmErr.append(10.*float(rec[7]))
            slats.append(float(rec[12]))
            slons.append(float(rec[13]))
    FIGS={'map':1,'vadms':2}
    pmagplotlib.plot_init(FIGS['map'],6,6)
    pmagplotlib.plot_init(FIGS['vadms'],6,6)
    Opts={'res':res,'proj':proj,'loc_name':locs,'padlon':padlon,'padlat':padlat,'latmin':numpy.min(slats)-padlat,'latmax':numpy.max(slats)+padlat,'lonmin':numpy.min(slons)-padlon,'lonmax':numpy.max(slons)+padlon,'sym':'ro','boundinglat':0.,'pltgrid':1}
    Opts['lon_0']=int(0.5*(numpy.min(slons)+numpy.max(slons)))
    Opts['lat_0']=int(0.5*(numpy.min(slats)+numpy.max(slats)))
    Opts['gridspace']=gridspace
    if details==1:
        Opts['details']={'coasts':1,'rivers':0,'states':1,'countries':1,'ocean':1}
    else:
        Opts['details']={'coasts':1,'rivers':0,'states':0,'countries':0,'ocean':1}
    Opts['details']['fancy']=fancy
    pmagplotlib.plotMAP(FIGS['map'],slats,slons,Opts)
    pmagplotlib.plotXY(FIGS['vadms'],Age,Vadm,sym='bo',xlab='Age (Years CE)',ylab=r'VADM (ZAm$^2$)')
    if verbose:pmagplotlib.drawFIGS(FIGS)
    files={}
    for key in FIGS.keys():
        files[key]=key+'.'+fmt
    if pmagplotlib.isServer:
        black     = '#000000'
        purple    = '#800080'
        titles={}
        titles['map']='Map'
        titles['vadms']='VADMs'
        FIG = pmagplotlib.addBorders(FIGS,titles,black,purple)
        pmagplotlib.saveP(FIGS,files)
    elif verbose:
        ans=raw_input(" S[a]ve to save plot, Return to quit:  ")
        if ans=="a":
            pmagplotlib.saveP(FIGS,files)
    else:
        pmagplotlib.saveP(FIGS,files)
Esempio n. 37
0
def main():
    """
    NAME 
        vgpmap_magic.py 

    DESCRIPTION
        makes a map of vgps and a95/dp,dm for site means in a pmag_results table
 
    SYNTAX
        vgpmap_magic.py [command line options]

    OPTIONS
        -h prints help and quits
        -eye  ELAT ELON [specify eyeball location], default is 90., 0.
        -f FILE pmag_results format file, [default is pmag_results.txt] 
        -res [c,l,i,h] specify resolution (crude, low, intermediate, high]
        -etp plot the etopo20 topographpy data (requires high resolution data set)
        -prj PROJ,  specify one of the following:
             ortho = orthographic
             lcc = lambert conformal
             moll = molweide
             merc = mercator
        -sym SYM SIZE: choose a symbol and size, examples: 
            ro 5 : small red circles
            bs 10 : intermediate blue squares
            g^ 20 : large green triangles
        -ell  plot dp/dm or a95 ellipses
        -rev RSYM RSIZE : flip reverse poles to normal antipode 
        -S:  plot antipodes of all poles
        -age : plot the ages next to the poles
        -crd [g,t] : choose coordinate system, default is to plot all site VGPs
        -fmt [pdf, png, eps...] specify output format, default is pdf
        -sav  save and quit    
    DEFAULTS
        FILE: pmag_results.txt
        res:  c
        prj: ortho 
        ELAT,ELON = 0,0
        SYM SIZE: ro 8
        RSYM RSIZE: g^ 8
    
    """
    dir_path='.'
    res,ages='c',0
    plot=0
    proj='ortho'
    results_file='pmag_results.txt'
    ell,flip=0,0
    lat_0,lon_0=90.,0.
    fmt='pdf'
    sym,size='ro',8
    rsym,rsize='g^',8
    anti=0
    fancy=0
    coord=""
    if '-WD' in sys.argv:
        ind = sys.argv.index('-WD')
        dir_path=sys.argv[ind+1]
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-S' in sys.argv:anti=1
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt=sys.argv[ind+1]
    if '-sav' in sys.argv:plot=1
    if '-res' in sys.argv:
        ind = sys.argv.index('-res')
        res=sys.argv[ind+1]
    if '-etp' in sys.argv:fancy=1
    if '-prj' in sys.argv:
        ind = sys.argv.index('-prj')
        proj=sys.argv[ind+1]
    if '-rev' in sys.argv: 
        flip=1
        ind = sys.argv.index('-rev')
        rsym=(sys.argv[ind+1])
        rsize=int(sys.argv[ind+2])
    if '-sym' in sys.argv:
        ind = sys.argv.index('-sym')
        sym=(sys.argv[ind+1])
        size=int(sys.argv[ind+2])
    if '-eye' in sys.argv:
        ind = sys.argv.index('-eye')
        lat_0=float(sys.argv[ind+1])
        lon_0=float(sys.argv[ind+2])
    if '-ell' in sys.argv: ell=1
    if '-age' in sys.argv: ages=1
    if '-f' in sys.argv:
        ind = sys.argv.index('-f')
        results_file=sys.argv[ind+1]
    if '-crd' in sys.argv:
        ind = sys.argv.index('-crd')
        crd=sys.argv[ind+1]
        if crd=='g':coord='0'
        if crd=='t':coord='100'
    results_file=dir_path+'/'+results_file
    data,file_type=pmag.magic_read(results_file)
    if file_type!='pmag_results':
        print "bad results file"
        sys.exit()
    FIG={'map':1}
    pmagplotlib.plot_init(FIG['map'],6,6)
    # read in er_sites file
    lats,lons,dp,dm,a95=[],[],[],[],[]
    Pars=[]
    dates,rlats,rlons=[],[],[]
    if 'data_type' in data[0].keys():
        Results=pmag.get_dictitem(data,'data_type','i','T') # get all site level data
    else:
        Results=data
    Results=pmag.get_dictitem(Results,'vgp_lat','','F') # get all non-blank latitudes
    Results=pmag.get_dictitem(Results,'vgp_lon','','F') # get all non-blank longitudes
    if coord!="":Results=pmag.get_dictitem(Results,'tilt_correction',coord,'T') # get specified coordinate system
    location=""
    for rec in Results:
            if rec['er_location_names'] not in location:location = location+':'+rec['er_location_names']
            if 'average_age' in rec.keys() and rec['average_age']!="" and ages==1:
                dates.append(rec['average_age'])
            lat=float(rec['vgp_lat'])
            lon=float(rec['vgp_lon'])
            if flip==0:
                lats.append(lat)
                lons.append(lon)
            elif flip==1:
                if lat<0:
                    rlats.append(-lat)
                    lon=lon+180.
                    if lon>360:lon=lon-360.
                    rlons.append(lon)
                else:
                    lats.append(lat)
                    lons.append(lon)
            elif anti==1:
                lats.append(-lat)
                lon=lon+180.
                if lon>360:lon=lon-360.
                lons.append(lon)
            ppars=[]
            ppars.append(lon)
            ppars.append(lat)
            ell1,ell2="",""
            if 'vgp_dm' in rec.keys() and rec['vgp_dm']!="":ell1=float(rec['vgp_dm'])
            if 'vgp_dp' in rec.keys() and rec['vgp_dp']!="":ell2=float(rec['vgp_dp'])
            if 'vgp_alpha95' in rec.keys() and rec['vgp_alpha95']!="":ell1,ell2=float(rec['vgp_alpha95']),float(rec['vgp_alpha95'])
            if ell1!="" and ell2!="":
                ppars=[]
                ppars.append(lons[-1])
                ppars.append(lats[-1])
                ppars.append(ell1)
                ppars.append(lons[-1])
                isign=abs(lats[-1])/lats[-1]
                ppars.append(lats[-1]-isign*90.)
                ppars.append(ell2)
                ppars.append(lons[-1]+90.)
                ppars.append(0.)
                Pars.append(ppars)
    location=location.strip(':')
    Opts={'latmin':-90,'latmax':90,'lonmin':0.,'lonmax':360.,'lat_0':lat_0,'lon_0':lon_0,'proj':proj,'sym':'bs','symsize':3,'pltgrid':0,'res':res,'boundinglat':0.}
    Opts['details']={'coasts':1,'rivers':0, 'states':0, 'countries':0,'ocean':1,'fancy':fancy}
    pmagplotlib.plotMAP(FIG['map'],[90.],[0.],Opts) # make the base map with a blue triangle at the pole`
    Opts['pltgrid']=-1
    Opts['sym']=sym
    Opts['symsize']=size
    if len(dates)>0:Opts['names']=dates
    if len(lats)>0:pmagplotlib.plotMAP(FIG['map'],lats,lons,Opts) # add the lats and lons of the poles
    Opts['names']=[]
    if len(rlats)>0:
        Opts['sym']=rsym
        Opts['symsize']=rsize
        pmagplotlib.plotMAP(FIG['map'],rlats,rlons,Opts) # add the lats and lons of the poles
    if plot==0:
        pmagplotlib.drawFIGS(FIG)
    if ell==1: # add ellipses if desired.
        Opts['details']={'coasts':0,'rivers':0, 'states':0, 'countries':0,'ocean':0}
        Opts['pltgrid']=-1 # turn off meridian replotting
        Opts['symsize']=2
        Opts['sym']='g-'
        for ppars in Pars:
            if ppars[2]!=0:
                PTS=pmagplotlib.plotELL(FIG['map'],ppars,'g.',0,0)
                elats,elons=[],[]
                for pt in PTS:
                    elons.append(pt[0])
                    elats.append(pt[1])
                pmagplotlib.plotMAP(FIG['map'],elats,elons,Opts) # make the base map with a blue triangle at the pole`
                if plot==0:pmagplotlib.drawFIGS(FIG)
    files={}
    for key in FIG.keys():
        files[key]='LO:_'+location+'_VGP_map.'+fmt
    if pmagplotlib.isServer:
        black     = '#000000'
        purple    = '#800080'
        titles={}
        titles['eq']='LO:_'+location+'_VGP_map'
        FIG = pmagplotlib.addBorders(FIG,titles,black,purple)
        pmagplotlib.saveP(FIG,files)
    elif plot==0:
        pmagplotlib.drawFIGS(FIG)
        ans=raw_input(" S[a]ve to save plot, Return to quit:  ")
        if ans=="a":
            pmagplotlib.saveP(FIG,files)
        else:
            print "Good bye"
            sys.exit()
    else:
        pmagplotlib.saveP(FIG,files)
Esempio n. 38
0
def main():
    """
    NAME
        lowrie.py

    DESCRIPTION
       plots intensity decay curves for Lowrie experiments

    SYNTAX 
        lowrie -h [command line options]
    
    INPUT 
       takes SIO formatted input files
    
    OPTIONS
        -h prints help message and quits
        -f FILE: specify input file
        -N do not normalize by maximum magnetization
        -fmt [svg, pdf, eps, png] specify fmt, default is svg
        -sav save plots and quit
    """
    fmt, plot = "svg", 0
    FIG = {}  # plot dictionary
    FIG["lowrie"] = 1  # demag is figure 1
    pmagplotlib.plot_init(FIG["lowrie"], 6, 6)
    norm = 1  # default is to normalize by maximum axis
    if len(sys.argv) > 1:
        if "-h" in sys.argv:
            print main.__doc__
            sys.exit()
        if "-N" in sys.argv:
            norm = 0  # don't normalize
        if "-sav" in sys.argv:
            plot = 1  # don't normalize
        if "-fmt" in sys.argv:  # sets input filename
            ind = sys.argv.index("-fmt")
            fmt = sys.argv[ind + 1]
        if "-f" in sys.argv:  # sets input filename
            ind = sys.argv.index("-f")
            in_file = sys.argv[ind + 1]
        else:
            print main.__doc__
            print "you must supply a file name"
            sys.exit()
    else:
        print main.__doc__
        print "you must supply a file name"
        sys.exit()
    data = open(in_file).readlines()  # open the SIO format file
    PmagRecs = []  # set up a list for the results
    keys = ["specimen", "treatment", "csd", "M", "dec", "inc"]
    for line in data:
        PmagRec = {}
        rec = line.replace("\n", "").split()
        for k in range(len(keys)):
            PmagRec[keys[k]] = rec[k]
        PmagRecs.append(PmagRec)
    specs = pmag.get_dictkey(PmagRecs, "specimen", "")
    sids = []
    for spec in specs:
        if spec not in sids:
            sids.append(spec)  # get list of unique specimen names
    for spc in sids:  # step through the specimen names
        print spc
        specdata = pmag.get_dictitem(PmagRecs, "specimen", spc, "T")  # get all this one's data
        DIMs, Temps = [], []
        for dat in specdata:  # step through the data
            DIMs.append([float(dat["dec"]), float(dat["inc"]), float(dat["M"]) * 1e-3])
            Temps.append(float(dat["treatment"]))
        carts = pmag.dir2cart(DIMs).transpose()
        # if norm==1: # want to normalize
        #    nrm=max(max(abs(carts[0])),max(abs(carts[1])),max(abs(carts[2]))) # by maximum of x,y,z values
        #    ylab="M/M_max"
        if norm == 1:  # want to normalize
            nrm = DIMs[0][2]  # normalize by NRM
            ylab = "M/M_o"
        else:
            nrm = 1.0  # don't normalize
            ylab = "Magnetic moment (Am^2)"
        xlab = "Temperature (C)"
        pmagplotlib.plotXY(FIG["lowrie"], Temps, abs(carts[0]) / nrm, sym="r-")
        pmagplotlib.plotXY(FIG["lowrie"], Temps, abs(carts[0]) / nrm, sym="ro")  # X direction
        pmagplotlib.plotXY(FIG["lowrie"], Temps, abs(carts[1]) / nrm, sym="c-")
        pmagplotlib.plotXY(FIG["lowrie"], Temps, abs(carts[1]) / nrm, sym="cs")  # Y direction
        pmagplotlib.plotXY(FIG["lowrie"], Temps, abs(carts[2]) / nrm, sym="k-")
        pmagplotlib.plotXY(
            FIG["lowrie"], Temps, abs(carts[2]) / nrm, sym="k^", title=spc, xlab=xlab, ylab=ylab
        )  # Z direction
        files = {"lowrie": "lowrie:_" + spc + "_." + fmt}
        if plot == 0:
            pmagplotlib.drawFIGS(FIG)
            ans = raw_input("S[a]ve figure? [q]uit, <return> to continue   ")
            if ans == "a":
                pmagplotlib.saveP(FIG, files)
            elif ans == "q":
                sys.exit()
        else:
            pmagplotlib.saveP(FIG, files)
        pmagplotlib.clearFIG(FIG["lowrie"])
Esempio n. 39
0
def main():
    """
    NAME
        dmag_magic.py

    DESCRIPTION
       plots intensity decay curves for demagnetization experiments

    SYNTAX
        dmag_magic -h [command line options]

    INPUT
       takes magic formatted magic_measurements.txt files

    OPTIONS
        -h prints help message and quits
        -f FILE: specify input file, default is: magic_measurements.txt
        -obj OBJ: specify  object  [loc, sit, sam, spc] for plot, default is by location
        -LT [AF,T,M]: specify lab treatment type, default AF
        -XLP [PI]: exclude specific  lab protocols (for example, method codes like LP-PI)
        -N do not normalize by NRM magnetization
        -sav save plots silently and quit
        -fmt [svg,jpg,png,pdf] set figure format [default is svg]
    NOTE
        loc: location (study); sit: site; sam: sample; spc: specimen
    """
    FIG = {}  # plot dictionary
    FIG['demag'] = 1  # demag is figure 1
    in_file, plot_key, LT = 'magic_measurements.txt', 'er_location_name', "LT-AF-Z"
    XLP = ""
    norm = 1
    LT = 'LT-AF-Z'
    units, dmag_key = 'T', 'treatment_ac_field'
    plot = 0
    fmt = 'svg'
    if len(sys.argv) > 1:
        if '-h' in sys.argv:
            print(main.__doc__)
            sys.exit()
        if '-N' in sys.argv: norm = 0
        if '-sav' in sys.argv:
            plot = 1
        if '-f' in sys.argv:
            ind = sys.argv.index("-f")
            in_file = sys.argv[ind + 1]
        if '-fmt' in sys.argv:
            ind = sys.argv.index("-fmt")
            fmt = sys.argv[ind + 1]
        if '-obj' in sys.argv:
            ind = sys.argv.index('-obj')
            plot_by = sys.argv[ind + 1]
            if plot_by == 'sit': plot_key = 'er_site_name'
            if plot_by == 'sam': plot_key = 'er_sample_name'
            if plot_by == 'spc': plot_key = 'er_specimen_name'
        if '-XLP' in sys.argv:
            ind = sys.argv.index("-XLP")
            XLP = sys.argv[ind + 1]  # get lab protocol for excluding
        if '-LT' in sys.argv:
            ind = sys.argv.index("-LT")
            LT = 'LT-' + sys.argv[ind +
                                  1] + '-Z'  # get lab treatment for plotting
            if LT == 'LT-T-Z':
                units, dmag_key = 'K', 'treatment_temp'
            elif LT == 'LT-AF-Z':
                units, dmag_key = 'T', 'treatment_ac_field'
            elif LT == 'LT-M-Z':
                units, dmag_key = 'J', 'treatment_mw_energy'
            else:
                units = 'U'
    data, file_type = pmag.magic_read(in_file)
    sids = pmag.get_specs(data)
    pmagplotlib.plot_init(FIG['demag'], 5, 5)
    print(len(data), ' records read from ', in_file)
    #
    #
    # find desired intensity data
    #
    #
    plotlist, intlist = [], [
        'measurement_magnitude', 'measurement_magn_moment',
        'measurement_magn_volume', 'measurement_magn_mass'
    ]
    IntMeths = []
    FixData = []
    for rec in data:
        meths = []
        methcodes = rec['magic_method_codes'].split(':')
        for meth in methcodes:
            meths.append(meth.strip())
        for key in rec.keys():
            if key in intlist and rec[key] != "":
                if key not in IntMeths: IntMeths.append(key)
                if rec[plot_key] not in plotlist and LT in meths:
                    plotlist.append(rec[plot_key])
                if 'measurement_flag' not in rec.keys():
                    rec['measurement_flag'] = 'g'
                FixData.append(rec)
        plotlist.sort()
    if len(IntMeths) == 0:
        print('No intensity information found')
        sys.exit()
    data = FixData
    int_key = IntMeths[
        0]  # plot first intensity method found - normalized to initial value anyway - doesn't matter which used
    for plt in plotlist:
        if plot == 0: print(plt, 'plotting by: ', plot_key)
        PLTblock = pmag.get_dictitem(
            data, plot_key, plt,
            'T')  # fish out all the data for this type of plot
        PLTblock = pmag.get_dictitem(
            PLTblock, 'magic_method_codes', LT,
            'has')  # fish out all the dmag for this experiment type
        PLTblock = pmag.get_dictitem(
            PLTblock, int_key, '',
            'F')  # get all with this intensity key non-blank
        if XLP != "":
            PLTblock = pmag.get_dictitem(
                PLTblock, 'magic_method_codes', XLP,
                'not')  # reject data with XLP in method_code
        if len(PLTblock) > 2:
            title = PLTblock[0][plot_key]
            spcs = []
            for rec in PLTblock:
                if rec['er_specimen_name'] not in spcs:
                    spcs.append(rec['er_specimen_name'])
            for spc in spcs:
                SPCblock = pmag.get_dictitem(PLTblock, 'er_specimen_name', spc,
                                             'T')  # plot specimen by specimen
                INTblock = []
                for rec in SPCblock:
                    INTblock.append([
                        float(rec[dmag_key]), 0, 0,
                        float(rec[int_key]), 1, rec['measurement_flag']
                    ])
                if len(INTblock) > 2:
                    pmagplotlib.plotMT(FIG['demag'], INTblock, title, 0, units,
                                       norm)
            if plot == 1:
                files = {}
                for key in FIG.keys():
                    files[key] = title + '_' + LT + '.' + fmt
                pmagplotlib.saveP(FIG, files)
                sys.exit()
            else:
                pmagplotlib.drawFIGS(FIG)
                ans = raw_input(
                    " S[a]ve to save plot, [q]uit,  Return to continue:  ")
                if ans == 'q': sys.exit()
                if ans == "a":
                    files = {}
                    for key in FIG.keys():
                        files[key] = title + '_' + LT + '.' + fmt
                    pmagplotlib.saveP(FIG, files)
            pmagplotlib.clearFIG(FIG['demag'])
Esempio n. 40
0
def main():
    """
    NAME
       qqplot.py

    DESCRIPTION
       makes qq plot of input data  against a Normal distribution.  
       

    INPUT FORMAT
       takes real numbers in single column
   
    SYNTAX
       qqplot.py [-h][-i][-f FILE]

    OPTIONS
        -f FILE, specify file on command line
        -fmt [png,svg,jpg,eps] set plot output format [default is svg]
        -sav saves and quits

    OUTPUT
         calculates the K-S D and the D expected for a normal distribution 
         when D<Dc,  distribution is normal (at 95% level of confidence).

    """
    fmt,plot='svg',0
    if '-h' in sys.argv: # check if help is needed
        print(main.__doc__)
        sys.exit() # graceful quit
    if '-sav' in sys.argv: plot=1
    if '-fmt' in sys.argv: 
        ind=sys.argv.index('-fmt')
        fmt=sys.argv[ind+1]
    if '-f' in sys.argv: # ask for filename
        ind=sys.argv.index('-f')
        file=sys.argv[ind+1]
        f=open(file,'r')
        data=f.readlines()
    X= [] # set up list for data
    for line in data:   # read in the data from standard input
        rec=line.split() # split each line on space to get records
        X.append(float(rec[0])) # append data to X
#
    QQ={'qq':1}
    pmagplotlib.plot_init(QQ['qq'],5,5)
    pmagplotlib.plotQQnorm(QQ['qq'],X,'Q-Q Plot') # make plot
    if plot==0:
        pmagplotlib.drawFIGS(QQ)
    files={}
    for key in list(QQ.keys()):
        files[key]=key+'.'+fmt 
    if pmagplotlib.isServer:
        black     = '#000000'
        purple    = '#800080'
        titles={}
        titles['eq']='Q-Q Plot'
        QQ = pmagplotlib.addBorders(EQ,titles,black,purple)
        pmagplotlib.saveP(QQ,files)
    elif plot==0:
        ans=input(" S[a]ve to save plot, [q]uit without saving:  ")
        if ans=="a": 
            pmagplotlib.saveP(QQ,files) 
    else:
        pmagplotlib.saveP(QQ,files) 
Esempio n. 41
0
def main():
    """
    NAME
       foldtest.py

    DESCRIPTION
       does a fold test (Tauxe, 2010) on data

    INPUT FORMAT
       dec inc dip_direction dip

    SYNTAX
       foldtest.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f FILE file with input data
        -F FILE for confidence bounds on fold test
        -u ANGLE (circular standard deviation) for uncertainty on bedding poles
        -b MIN MAX bounds for quick search of percent untilting [default is -10 to 150%]
        -n NB  number of bootstrap samples [default is 1000]
        -fmt FMT, specify format - default is svg
        -sav  save figures and quit
    INPUT FILE
	Dec Inc Dip_Direction Dip  in space delimited file

    OUTPUT PLOTS
        Geographic: is an equal area projection of the input data in
                    original coordinates
        Stratigraphic: is an equal area projection of the input data in
                    tilt adjusted coordinates
        % Untilting: The dashed (red) curves are representative plots of
                    maximum eigenvalue (tau_1) as a function of untilting
                    The solid line is the cumulative distribution of the
                    % Untilting required to maximize tau for all the
                    bootstrapped data sets.  The dashed vertical lines
                    are 95% confidence bounds on the % untilting that yields
                   the most clustered result (maximum tau_1).
        Command line: prints out the bootstrapped iterations and
                   finally the confidence bounds on optimum untilting.
        If the 95% conf bounds include 0, then a post-tilt magnetization is indicated
        If the 95% conf bounds include 100, then a pre-tilt magnetization is indicated
        If the 95% conf bounds exclude both 0 and 100, syn-tilt magnetization is
                possible as is vertical axis rotation or other pathologies
        Geographic: is an equal area projection of the input data in

    OPTIONAL OUTPUT FILE:
       The output file has the % untilting within the 95% confidence bounds
nd the number of bootstrap samples
    """
    kappa = 0
    fmt, plot = 'svg', 0
    nb = 1000  # number of bootstraps
    min, max = -10, 150
    if '-h' in sys.argv:  # check if help is needed
        print main.__doc__
        sys.exit()  # graceful quit
    if '-F' in sys.argv:
        ind = sys.argv.index('-F')
        outfile = open(sys.argv[ind + 1], 'w')
    else:
        outfile = ""
    if '-f' in sys.argv:
        ind = sys.argv.index('-f')
        file = sys.argv[ind + 1]
        DIDDs = numpy.loadtxt(file)
    else:
        print main.__doc__
        sys.exit()
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt = sys.argv[ind + 1]
    if '-sav' in sys.argv: plot = 1
    if '-b' in sys.argv:
        ind = sys.argv.index('-b')
        min = int(sys.argv[ind + 1])
        max = int(sys.argv[ind + 2])
    if '-n' in sys.argv:
        ind = sys.argv.index('-n')
        nb = int(sys.argv[ind + 1])
    if '-u' in sys.argv:
        ind = sys.argv.index('-u')
        csd = float(sys.argv[ind + 1])
        kappa = (81. / csd)**2
    #
    # get to work
    #
    PLTS = {'geo': 1, 'strat': 2, 'taus': 3}  # make plot dictionary
    pmagplotlib.plot_init(PLTS['geo'], 5, 5)
    pmagplotlib.plot_init(PLTS['strat'], 5, 5)
    pmagplotlib.plot_init(PLTS['taus'], 5, 5)
    pmagplotlib.plotEQ(PLTS['geo'], DIDDs, 'Geographic')
    D, I = pmag.dotilt_V(DIDDs)
    TCs = numpy.array([D, I]).transpose()
    pmagplotlib.plotEQ(PLTS['strat'], TCs, 'Stratigraphic')
    if plot == 0: pmagplotlib.drawFIGS(PLTS)
    Percs = range(min, max)
    Cdf, Untilt = [], []
    pylab.figure(num=PLTS['taus'])
    print 'doing ', nb, ' iterations...please be patient.....'
    for n in range(
            nb):  # do bootstrap data sets - plot first 25 as dashed red line
        if n % 50 == 0: print n
        Taus = []  # set up lists for taus
        PDs = pmag.pseudo(DIDDs)
        if kappa != 0:
            for k in range(len(PDs)):
                d, i = pmag.fshdev(kappa)
                dipdir, dip = pmag.dodirot(d, i, PDs[k][2], PDs[k][3])
                PDs[k][2] = dipdir
                PDs[k][3] = dip
        for perc in Percs:
            tilt = numpy.array([1., 1., 1., 0.01 * perc])
            D, I = pmag.dotilt_V(PDs * tilt)
            TCs = numpy.array([D, I]).transpose()
            ppars = pmag.doprinc(TCs)  # get principal directions
            Taus.append(ppars['tau1'])
        if n < 25: pylab.plot(Percs, Taus, 'r--')
        Untilt.append(Percs[Taus.index(
            numpy.max(Taus))])  # tilt that gives maximum tau
        Cdf.append(float(n) / float(nb))
    pylab.plot(Percs, Taus, 'k')
    pylab.xlabel('% Untilting')
    pylab.ylabel('tau_1 (red), CDF (green)')
    Untilt.sort()  # now for CDF of tilt of maximum tau
    pylab.plot(Untilt, Cdf, 'g')
    lower = int(.025 * nb)
    upper = int(.975 * nb)
    pylab.axvline(x=Untilt[lower], ymin=0, ymax=1, linewidth=1, linestyle='--')
    pylab.axvline(x=Untilt[upper], ymin=0, ymax=1, linewidth=1, linestyle='--')
    tit = '%i - %i %s' % (Untilt[lower], Untilt[upper], 'Percent Unfolding')
    print tit
    print 'range of all bootstrap samples: ', Untilt[0], ' - ', Untilt[-1]
    pylab.title(tit)
    outstring = '%i - %i; %i\n' % (Untilt[lower], Untilt[upper], nb)
    if outfile != "": outfile.write(outstring)
    files = {}
    for key in PLTS.keys():
        files[key] = ('foldtest_' + '%s' % (key.strip()[:2]) + '.' + fmt)
    if plot == 0:
        pmagplotlib.drawFIGS(PLTS)
        ans = raw_input('S[a]ve all figures, <Return> to quit   ')
        if ans != 'a':
            print "Good bye"
            sys.exit()
    pmagplotlib.saveP(PLTS, files)
Esempio n. 42
0
def main():
    """
    NAME
        quick_hyst.py

    DESCRIPTION
        makes plots of hysteresis data

    SYNTAX
        quick_hyst.py [command line options]

    OPTIONS
        -h prints help message and quits
        -usr USER:   identify user, default is ""
        -f: specify input file, default is magic_measurements.txt
        -spc SPEC: specify specimen name to plot and quit
        -sav save all plots and quit
        -fmt [png,svg,eps,jpg]
    """
    args = sys.argv
    PLT = 1
    plots = 0
    user, meas_file = "", "magic_measurements.txt"
    pltspec = ""
    dir_path = '.'
    fmt = 'png'
    verbose = pmagplotlib.verbose
    version_num = pmag.get_version()
    if '-WD' in args:
        ind = args.index('-WD')
        dir_path = args[ind + 1]
    if "-h" in args:
        print(main.__doc__)
        sys.exit()
    if "-usr" in args:
        ind = args.index("-usr")
        user = args[ind + 1]
    if '-f' in args:
        ind = args.index("-f")
        meas_file = args[ind + 1]
    if '-sav' in args:
        verbose = 0
        plots = 1
    if '-spc' in args:
        ind = args.index("-spc")
        pltspec = args[ind + 1]
        verbose = 0
        plots = 1
    if '-fmt' in args:
        ind = args.index("-fmt")
        fmt = args[ind + 1]
    meas_file = dir_path + '/' + meas_file
    print('verbose', verbose)
    #
    #
    meas_data, file_type = pmag.magic_read(meas_file)
    if file_type != 'magic_measurements':
        print(main.__doc__)
        print('bad file')
        sys.exit()
    #
    # initialize some variables
    # define figure numbers for hyst,deltaM,DdeltaM curves
    HystRecs, RemRecs = [], []
    HDD = {}
    HDD['hyst'] = 1
    pmagplotlib.plot_init(HDD['hyst'], 5, 5)
    #
    # get list of unique experiment names and specimen names
    #
    experiment_names, sids = [], []
    hyst_data = pmag.get_dictitem(meas_data, 'magic_method_codes', 'LP-HYS',
                                  'has')  # get all hysteresis data
    for rec in hyst_data:
        if 'er_synthetic_name' in rec.keys(
        ) and rec['er_synthetic_name'] != "":
            rec['er_specimen_name'] = rec['er_synthetic_name']
        if rec['magic_experiment_name'] not in experiment_names:
            experiment_names.append(rec['magic_experiment_name'])
        if rec['er_specimen_name'] not in sids:
            sids.append(rec['er_specimen_name'])
        if 'measurement_temp' not in rec.keys():
            rec['measurement_temp'] = '300'  # assume room T measurement unless otherwise specified
    #
    k = 0
    if pltspec != "":
        k = sids.index(pltspec)
    intlist = [
        'measurement_magnitude', 'measurement_magn_moment',
        'measurement_magn_volume', 'measurement_magn_mass'
    ]
    while k < len(sids):
        locname, site, sample, synth = '', '', '', ''
        s = sids[k]
        hmeths = []
        if verbose: print(s, k + 1, 'out of ', len(sids))
        #
        #
        B, M = [], []  #B,M for hysteresis, Bdcd,Mdcd for irm-dcd data
        spec = pmag.get_dictitem(hyst_data, 'er_specimen_name', s,
                                 'T')  # get all measurements for this specimen
        if 'er_location_name' in spec[0].keys():
            locname = spec[0]['er_location_name']
        if 'er_site_name' in spec[0].keys():
            site = spec[0]['er_site_name']
        if 'er_sample_name' in spec[0].keys():
            sample = spec[0]['er_sample_name']
        if 'er_synthetic_name' in spec[0].keys():
            synth = spec[0]['er_synthetic_name']
        for m in intlist:
            meas_data = pmag.get_dictitem(
                spec, m, '', 'F')  # get all non-blank data for this specimen
            if len(meas_data) > 0: break
        c = ['k-', 'b-', 'c-', 'g-', 'm-', 'r-', 'y-']
        cnum = 0
        if len(meas_data) > 0:
            Temps = []
            xlab, ylab, title = '', '', ''
            for rec in meas_data:
                if rec['measurement_temp'] not in Temps:
                    Temps.append(rec['measurement_temp'])
            for t in Temps:
                print('working on t: ', t)
                t_data = pmag.get_dictitem(meas_data, 'measurement_temp', t,
                                           'T')
                B, M = [], []
                for rec in t_data:
                    B.append(float(rec['measurement_lab_field_dc']))
                    M.append(float(rec[m]))
    # now plot the hysteresis curve(s)
    #
                if len(B) > 0:
                    B = numpy.array(B)
                    M = numpy.array(M)
                    if t == Temps[-1]:
                        xlab = 'Field (T)'
                        ylab = m
                        title = 'Hysteresis: ' + s
                    if t == Temps[0]:
                        pmagplotlib.clearFIG(HDD['hyst'])
                    pmagplotlib.plotXY(HDD['hyst'],
                                       B,
                                       M,
                                       sym=c[cnum],
                                       xlab=xlab,
                                       ylab=ylab,
                                       title=title)
                    pmagplotlib.plotXY(HDD['hyst'],
                                       [1.1 * B.min(), 1.1 * B.max()], [0, 0],
                                       sym='k-',
                                       xlab=xlab,
                                       ylab=ylab,
                                       title=title)
                    pmagplotlib.plotXY(HDD['hyst'], [0, 0],
                                       [1.1 * M.min(), 1.1 * M.max()],
                                       sym='k-',
                                       xlab=xlab,
                                       ylab=ylab,
                                       title=title)
                    if verbose: pmagplotlib.drawFIGS(HDD)
                    cnum += 1
                    if cnum == len(c): cnum = 0
    #
        files = {}
        if plots:
            if pltspec != "": s = pltspec
            files = {}
            for key in HDD.keys():
                if pmagplotlib.isServer:  # use server plot naming convention
                    if synth == '':
                        filename = "LO:_" + locname + '_SI:_' + site + '_SA:_' + sample + '_SP:_' + s + '_TY:_' + key + '_.' + fmt
                    else:
                        filename = 'SY:_' + synth + '_TY:_' + key + '_.' + fmt
                    files[key] = filename
                else:  # use more readable plot naming convention
                    if synth == '':
                        filename = ''
                        for item in [locname, site, sample, s, key]:
                            if item:
                                item = item.replace(' ', '_')
                                filename += item + '_'
                        if filename.endswith('_'):
                            filename = filename[:-1]
                        filename += ".{}".format(fmt)
                    else:
                        filename = synth + '_' + key + '.fmt'
                    files[key] = filename

            pmagplotlib.saveP(HDD, files)
            if pltspec != "": sys.exit()
        if verbose:
            pmagplotlib.drawFIGS(HDD)
            ans = raw_input(
                "S[a]ve plots, [s]pecimen name, [q]uit, <return> to continue\n "
            )
            if ans == "a":
                files = {}
                for key in HDD.keys():
                    if pmagplotlib.isServer:
                        print('server')
                        files[
                            key] = "LO:_" + locname + '_SI:_' + site + '_SA:_' + sample + '_SP:_' + s + '_TY:_' + key + '_.' + fmt
                    else:
                        print('not server')
                        filename = ''
                        for item in [locname, site, sample, s, key]:
                            if item:
                                item = item.replace(' ', '_')
                                filename += item + '_'
                        if filename.endswith('_'):
                            filename = filename[:-1]
                        filename += ".{}".format(fmt)
                        files[key] = filename
                print('files', files)
                pmagplotlib.saveP(HDD, files)
            if ans == '': k += 1
            if ans == "p":
                del HystRecs[-1]
                k -= 1
            if ans == 'q':
                print("Good bye")
                sys.exit()
            if ans == 's':
                keepon = 1
                specimen = raw_input(
                    'Enter desired specimen name (or first part there of): ')
                while keepon == 1:
                    try:
                        k = sids.index(specimen)
                        keepon = 0
                    except:
                        tmplist = []
                        for qq in range(len(sids)):
                            if specimen in sids[qq]: tmplist.append(sids[qq])
                        print(specimen, " not found, but this was: ")
                        print(tmplist)
                        specimen = raw_input('Select one or try again\n ')
                        k = sids.index(specimen)
        else:
            k += 1
        if len(B) == 0:
            if verbose: print('skipping this one - no hysteresis data')
            k += 1
Esempio n. 43
0
def main():
    """
    NAME
        find_EI.py

    DESCRIPTION
        Applies series of assumed flattening factor and "unsquishes" inclinations assuming tangent function.
        Finds flattening factor that gives elongation/inclination pair consistent with TK03.
        Finds bootstrap confidence bounds

    SYNTAX
        find_EI.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f FILE specify input file name
        -nb N specify number of bootstraps - the more the better, but slower!, default is 1000
        -sc uses a "site-level" correction to a Fisherian distribution instead
            of a "study-level" correction to a TK03-consistent distribution.
            Note that many directions (~ 100) are needed for this correction to be reliable.
        -fmt [svg,png,eps,pdf..] change plot format, default is svg
        -sav  saves the figures and quits

    INPUT
        dec/inc pairs, delimited with space or tabs

    OUTPUT
        four plots:  1) equal area plot of original directions
                      2) Elongation/inclination pairs as a function of f,  data plus 25 bootstrap samples
                      3) Cumulative distribution of bootstrapped optimal inclinations plus uncertainties.
                         Estimate from original data set plotted as solid line
                      4) Orientation of principle direction through unflattening
    NOTE: If distribution does not have a solution, plot labeled: Pathological.  Some bootstrap samples may have
       valid solutions and those are plotted in the CDFs and E/I plot.

    """
    fmt, nb = 'svg', 1000
    plot = 0
    if '-h' in sys.argv:
        print(main.__doc__)
        sys.exit()  # graceful quit
    elif '-f' in sys.argv:
        ind = sys.argv.index('-f')
        file = sys.argv[ind + 1]
    else:
        print(main.__doc__)
        sys.exit()
    if '-nb' in sys.argv:
        ind = sys.argv.index('-nb')
        nb = int(sys.argv[ind + 1])
    if '-sc' in sys.argv:
        site_correction = True
    else:
        site_correction = False
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt = sys.argv[ind + 1]
    if '-sav' in sys.argv: plot = 1
    data = numpy.loadtxt(file)
    upper, lower = int(round(.975 * nb)), int(round(.025 * nb))
    E, I = [], []
    PLTS = {'eq': 1, 'ei': 2, 'cdf': 3, 'v2': 4}
    pmagplotlib.plot_init(PLTS['eq'], 6, 6)
    pmagplotlib.plot_init(PLTS['ei'], 5, 5)
    pmagplotlib.plot_init(PLTS['cdf'], 5, 5)
    pmagplotlib.plot_init(PLTS['v2'], 5, 5)
    pmagplotlib.plotEQ(PLTS['eq'], data, 'Data')
    if plot == 0: pmagplotlib.drawFIGS(PLTS)
    ppars = pmag.doprinc(data)
    Io = ppars['inc']
    n = ppars["N"]
    Es, Is, Fs, V2s = pmag.find_f(data)
    if site_correction:
        Inc, Elong = Is[Es.index(min(Es))], Es[Es.index(min(Es))]
        flat_f = Fs[Es.index(min(Es))]
    else:
        Inc, Elong = Is[-1], Es[-1]
        flat_f = Fs[-1]
    pmagplotlib.plotEI(PLTS['ei'], Es, Is, flat_f)
    pmagplotlib.plotV2s(PLTS['v2'], V2s, Is, flat_f)
    b = 0
    print("Bootstrapping.... be patient")
    while b < nb:
        bdata = pmag.pseudo(data)
        Esb, Isb, Fsb, V2sb = pmag.find_f(bdata)
        if b < 25:
            pmagplotlib.plotEI(PLTS['ei'], Esb, Isb, Fsb[-1])
        if Esb[-1] != 0:
            ppars = pmag.doprinc(bdata)
            if site_correction:
                I.append(abs(Isb[Esb.index(min(Esb))]))
                E.append(Esb[Esb.index(min(Esb))])
            else:
                I.append(abs(Isb[-1]))
                E.append(Esb[-1])
            b += 1
            if b % 25 == 0: print(b, ' out of ', nb)
    I.sort()
    E.sort()
    Eexp = []
    for i in I:
        Eexp.append(pmag.EI(i))
    if Inc == 0:
        title = 'Pathological Distribution: ' + '[%7.1f, %7.1f]' % (I[lower],
                                                                    I[upper])
    else:
        title = '%7.1f [%7.1f, %7.1f]' % (Inc, I[lower], I[upper])
    pmagplotlib.plotEI(PLTS['ei'], Eexp, I, 1)
    pmagplotlib.plotCDF(PLTS['cdf'], I, 'Inclinations', 'r', title)
    pmagplotlib.plotVs(PLTS['cdf'], [I[lower], I[upper]], 'b', '--')
    pmagplotlib.plotVs(PLTS['cdf'], [Inc], 'g', '-')
    pmagplotlib.plotVs(PLTS['cdf'], [Io], 'k', '-')
    if plot == 0:
        pmagplotlib.drawFIGS(PLTS)
        print("Io Inc  I_lower, I_upper, Elon, E_lower, E_upper")
        print('%7.1f %s %7.1f _ %7.1f ^ %7.1f:  %6.4f _ %6.4f ^ %6.4f' %
              (Io, " => ", Inc, I[lower], I[upper], Elong, E[lower], E[upper]))
        ans = input("S[a]ve plots - <return> to quit:  ")
        if ans != 'a':
            print("\n Good bye\n")
            sys.exit()
    files = {}
    files['eq'] = 'findEI_eq.' + fmt
    files['ei'] = 'findEI_ei.' + fmt
    files['cdf'] = 'findEI_cdf.' + fmt
    files['v2'] = 'findEI_v2.' + fmt
    pmagplotlib.saveP(PLTS, files)
Esempio n. 44
0
def main():
    """
    NAME
       watsons_v.py

    DESCRIPTION
       calculates Watson's V statistic from input files

    INPUT FORMAT
       takes dec/inc as first two columns in two space delimited files
   
    SYNTAX
       watsons_v.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f FILE (with optional second)
        -f2 FILE (second file) 
        -ant,  flip antipodal directions to opposite direction
           in first file if only one file or flip all in second, if two files 
        -P  (don't save or show plot)
        -sav save figure and quit silently
        -fmt [png,svg,eps,pdf,jpg] format for saved figure

    OUTPUT
        Watson's V and the Monte Carlo Critical Value Vc.
        in plot, V is solid and Vc is dashed.

    """
    Flip = 0
    show, plot = 1, 0
    fmt = 'svg'
    file2 = ""
    if '-h' in sys.argv:  # check if help is needed
        print main.__doc__
        sys.exit()  # graceful quit
    if '-ant' in sys.argv: Flip = 1
    if '-sav' in sys.argv: show, plot = 0, 1  # don't display, but do save plot
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt = sys.argv[ind + 1]
    if '-P' in sys.argv: show = 0  # don't display or save plot
    if '-f' in sys.argv:
        ind = sys.argv.index('-f')
        file1 = sys.argv[ind + 1]
        data = numpy.loadtxt(file1).transpose()
        D1 = numpy.array([data[0], data[1]]).transpose()
    else:
        print "-f is required"
        print main.__doc__
        sys.exit()
    if '-f2' in sys.argv:
        ind = sys.argv.index('-f2')
        file2 = sys.argv[ind + 1]
        data2 = numpy.loadtxt(file2).transpose()
        D2 = numpy.array([data2[0], data2[1]]).transpose()
        if Flip == 1:
            D2, D = pmag.flip(D2)  # D2 are now flipped
            if len(D2) != 0:
                if len(D) != 0:
                    D2 = numpy.concatenate(D, D2)  # put all in D2
            elif len(D) != 0:
                D2 = D
            else:
                print 'length of second file is zero'
                sys.exit()
    elif Flip == 1:
        D2, D1 = pmag.flip(D1)  # peel out antipodal directions, put in D2
    #
    counter, NumSims = 0, 5000
    #
    # first calculate the fisher means and cartesian coordinates of each set of Directions
    #
    pars_1 = pmag.fisher_mean(D1)
    pars_2 = pmag.fisher_mean(D2)
    #
    # get V statistic for these
    #
    V = pmag.vfunc(pars_1, pars_2)
    #
    # do monte carlo simulation of datasets with same kappas, but common mean
    #
    Vp = []  # set of Vs from simulations
    if show == 1: print "Doing ", NumSims, " simulations"
    for k in range(NumSims):
        counter += 1
        if counter == 50:
            if show == 1: print k + 1
            counter = 0
        Dirp = []
        # get a set of N1 fisher distributed vectors with k1, calculate fisher stats
        for i in range(pars_1["n"]):
            Dirp.append(pmag.fshdev(pars_1["k"]))
        pars_p1 = pmag.fisher_mean(Dirp)
        # get a set of N2 fisher distributed vectors with k2, calculate fisher stats
        Dirp = []
        for i in range(pars_2["n"]):
            Dirp.append(pmag.fshdev(pars_2["k"]))
        pars_p2 = pmag.fisher_mean(Dirp)
        # get the V for these
        Vk = pmag.vfunc(pars_p1, pars_p2)
        Vp.append(Vk)


#
# sort the Vs, get Vcrit (95th one)
#
    Vp.sort()
    k = int(.95 * NumSims)
    if show == 1:
        print "Watson's V,  Vcrit: "
        print '   %10.1f %10.1f' % (V, Vp[k])
    if show == 1 or plot == 1:
        print "Watson's V,  Vcrit: "
        print '   %10.1f %10.1f' % (V, Vp[k])
        CDF = {'cdf': 1}
        pmagplotlib.plot_init(CDF['cdf'], 5, 5)
        pmagplotlib.plotCDF(CDF['cdf'], Vp, "Watson's V", 'r', "")
        pmagplotlib.plotVs(CDF['cdf'], [V], 'g', '-')
        pmagplotlib.plotVs(CDF['cdf'], [Vp[k]], 'b', '--')
        if plot == 0: pmagplotlib.drawFIGS(CDF)
        files = {}
        if file2 != "":
            files['cdf'] = 'watsons_v_' + file1 + '_' + file2 + '.' + fmt
        else:
            files['cdf'] = 'watsons_v_' + file1 + '.' + fmt
        if pmagplotlib.isServer:
            black = '#000000'
            purple = '#800080'
            titles = {}
            titles['cdf'] = 'Cumulative Distribution'
            CDF = pmagplotlib.addBorders(CDF, titles, black, purple)
            pmagplotlib.saveP(CDF, files)
        elif plot == 0:
            ans = raw_input(" S[a]ve to save plot, [q]uit without saving:  ")
            if ans == "a": pmagplotlib.saveP(CDF, files)
        if plot == 1:  # save and quit silently
            pmagplotlib.saveP(CDF, files)
Esempio n. 45
0
def main():
    """
    NAME
        hysteresis_magic.py

    DESCRIPTION
        calculates hystereis parameters and saves them in rmag_hystereis format file
        makes plots if option selected

    SYNTAX
        hysteresis_magic.py [command line options]

    OPTIONS
        -h prints help message and quits
        -usr USER:   identify user, default is ""
        -f: specify input file, default is agm_measurements.txt
        -fh: specify rmag_hysteresis.txt input file
        -F: specify output file, default is rmag_hysteresis.txt
        -P: do not make the plots
        -spc SPEC: specify specimen name to plot and quit
        -sav save all plots and quit
        -fmt [png,svg,eps,jpg]
    """
    args=sys.argv
    PLT=1
    plots=0
    user,meas_file,rmag_out,rmag_file="","agm_measurements.txt","rmag_hysteresis.txt",""
    pltspec=""
    dir_path='.'
    fmt='svg'
    verbose=pmagplotlib.verbose
    version_num=pmag.get_version()
    if '-WD' in args:
        ind=args.index('-WD')
        dir_path=args[ind+1]
    if "-h" in args:
        print(main.__doc__)
        sys.exit()
    if "-usr" in args:
        ind=args.index("-usr")
        user=args[ind+1]
    if '-f' in args:
        ind=args.index("-f")
        meas_file=args[ind+1]
    if '-F' in args:
        ind=args.index("-F")
        rmag_out=args[ind+1]
    if '-fh' in args:
        ind=args.index("-fh")
        rmag_file=args[ind+1]
        rmag_file=dir_path+'/'+rmag_file
    if '-P' in args:
        PLT=0
        irm_init,imag_init=-1,-1
    if '-sav' in args:
        verbose=0
        plots=1
    if '-spc' in args:
        ind=args.index("-spc")
        pltspec= args[ind+1]
        verbose=0
        plots=1
    if '-fmt' in args:
        ind=args.index("-fmt")
        fmt=args[ind+1]
    rmag_out=dir_path+'/'+rmag_out
    meas_file=dir_path+'/'+meas_file
    rmag_rem=dir_path+"/rmag_remanence.txt"
    #
    #
    meas_data,file_type=pmag.magic_read(meas_file)
    if file_type!='magic_measurements':
        print(main.__doc__)
        print('bad file')
        sys.exit()
    #
    # initialize some variables
    # define figure numbers for hyst,deltaM,DdeltaM curves
    HystRecs,RemRecs=[],[]
    HDD={}
    if verbose:
        if verbose and PLT:print("Plots may be on top of each other - use mouse to place ")
    if PLT:
        HDD['hyst'],HDD['deltaM'],HDD['DdeltaM']=1,2,3
        pmagplotlib.plot_init(HDD['DdeltaM'],5,5)
        pmagplotlib.plot_init(HDD['deltaM'],5,5)
        pmagplotlib.plot_init(HDD['hyst'],5,5)
        imag_init=0
        irm_init=0
    else:
        HDD['hyst'],HDD['deltaM'],HDD['DdeltaM'],HDD['irm'],HDD['imag']=0,0,0,0,0
    #
    if rmag_file!="":hyst_data,file_type=pmag.magic_read(rmag_file)
    #
    # get list of unique experiment names and specimen names
    #
    experiment_names,sids=[],[]
    for rec in meas_data:
      meths=rec['magic_method_codes'].split(':')
      methods=[]
      for meth in meths:
        methods.append(meth.strip())
      if 'LP-HYS' in methods:
        if 'er_synthetic_name' in list(rec.keys()) and rec['er_synthetic_name']!="":
            rec['er_specimen_name']=rec['er_synthetic_name']
        if rec['magic_experiment_name'] not in experiment_names:experiment_names.append(rec['magic_experiment_name'])
        if rec['er_specimen_name'] not in sids:sids.append(rec['er_specimen_name'])
    #
    k=0
    locname=''
    if pltspec!="":
        k=sids.index(pltspec)
        print(sids[k])
    while k < len(sids):
        s=sids[k]
        if verbose and PLT:print(s, k+1 , 'out of ',len(sids))
    #
    #
        B,M,Bdcd,Mdcd=[],[],[],[] #B,M for hysteresis, Bdcd,Mdcd for irm-dcd data
        Bimag,Mimag=[],[] #Bimag,Mimag for initial magnetization curves
        first_dcd_rec,first_rec,first_imag_rec=1,1,1
        for rec in  meas_data:
            methcodes=rec['magic_method_codes'].split(':')
            meths=[]
            for meth in methcodes:
                meths.append(meth.strip())
            if rec['er_specimen_name']==s and "LP-HYS" in meths:
                B.append(float(rec['measurement_lab_field_dc']))
                M.append(float(rec['measurement_magn_moment']))
                if first_rec==1:
                    e=rec['magic_experiment_name']
                    HystRec={}
                    first_rec=0
                    if "er_location_name" in list(rec.keys()):
                        HystRec["er_location_name"]=rec["er_location_name"]
                        locname=rec['er_location_name'].replace('/','-')
                    if "er_sample_name" in list(rec.keys()):HystRec["er_sample_name"]=rec["er_sample_name"]
                    if "er_site_name" in list(rec.keys()):HystRec["er_site_name"]=rec["er_site_name"]
                    if "er_synthetic_name" in list(rec.keys()) and rec['er_synthetic_name']!="":
                        HystRec["er_synthetic_name"]=rec["er_synthetic_name"]
                    else:
                        HystRec["er_specimen_name"]=rec["er_specimen_name"]
            if rec['er_specimen_name']==s and "LP-IRM-DCD" in meths:
                Bdcd.append(float(rec['treatment_dc_field']))
                Mdcd.append(float(rec['measurement_magn_moment']))
                if first_dcd_rec==1:
                    RemRec={}
                    irm_exp=rec['magic_experiment_name']
                    first_dcd_rec=0
                    if "er_location_name" in list(rec.keys()):RemRec["er_location_name"]=rec["er_location_name"]
                    if "er_sample_name" in list(rec.keys()):RemRec["er_sample_name"]=rec["er_sample_name"]
                    if "er_site_name" in list(rec.keys()):RemRec["er_site_name"]=rec["er_site_name"]
                    if "er_synthetic_name" in list(rec.keys()) and rec['er_synthetic_name']!="":
                        RemRec["er_synthetic_name"]=rec["er_synthetic_name"]
                    else:
                        RemRec["er_specimen_name"]=rec["er_specimen_name"]
            if rec['er_specimen_name']==s and "LP-IMAG" in meths:
                if first_imag_rec==1:
                    imag_exp=rec['magic_experiment_name']
                    first_imag_rec=0
                Bimag.append(float(rec['measurement_lab_field_dc']))
                Mimag.append(float(rec['measurement_magn_moment']))
    #
    # now plot the hysteresis curve
    #
        if len(B)>0:
            hmeths=[]
            for meth in meths: hmeths.append(meth)
            hpars=pmagplotlib.plotHDD(HDD,B,M,e)
            if verbose and PLT:pmagplotlib.drawFIGS(HDD)
    #
    # get prior interpretations from hyst_data
            if rmag_file!="":
                hpars_prior={}
                for rec in hyst_data:
                    if rec['magic_experiment_names']==e:
                        if rec['hysteresis_bcr'] !="" and rec['hysteresis_mr_moment']!="":
                            hpars_prior['hysteresis_mr_moment']=rec['hysteresis_mr_moment']
                            hpars_prior['hysteresis_ms_moment']=rec['hysteresis_ms_moment']
                            hpars_prior['hysteresis_bc']=rec['hysteresis_bc']
                            hpars_prior['hysteresis_bcr']=rec['hysteresis_bcr']
                            break
                if verbose:pmagplotlib.plotHPARS(HDD,hpars_prior,'ro')
            else:
                if verbose:pmagplotlib.plotHPARS(HDD,hpars,'bs')
                HystRec['hysteresis_mr_moment']=hpars['hysteresis_mr_moment']
                HystRec['hysteresis_ms_moment']=hpars['hysteresis_ms_moment']
                HystRec['hysteresis_bc']=hpars['hysteresis_bc']
                HystRec['hysteresis_bcr']=hpars['hysteresis_bcr']
                HystRec['hysteresis_xhf']=hpars['hysteresis_xhf']
                HystRec['magic_experiment_names']=e
                HystRec['magic_software_packages']=version_num
                if hpars["magic_method_codes"] not in hmeths:hmeths.append(hpars["magic_method_codes"])
                methods=""
                for meth in hmeths:
                    methods=methods+meth.strip()+":"
                HystRec["magic_method_codes"]=methods[:-1]
                HystRec["er_citation_names"]="This study"
                HystRecs.append(HystRec)
    #
        if len(Bdcd)>0:
            rmeths=[]
            for meth in meths: rmeths.append(meth)
            if verbose and PLT:print('plotting IRM')
            if irm_init==0:
                HDD['irm']=5
                pmagplotlib.plot_init(HDD['irm'],5,5)
                irm_init=1
            rpars=pmagplotlib.plotIRM(HDD['irm'],Bdcd,Mdcd,irm_exp)
            RemRec['remanence_mr_moment']=rpars['remanence_mr_moment']
            RemRec['remanence_bcr']=rpars['remanence_bcr']
            RemRec['magic_experiment_names']=irm_exp
            if rpars["magic_method_codes"] not in meths:meths.append(rpars["magic_method_codes"])
            methods=""
            for meth in rmeths:
                methods=methods+meth.strip()+":"
            RemRec["magic_method_codes"]=methods[:-1]
            RemRec["er_citation_names"]="This study"
            RemRecs.append(RemRec)
        else:
            if irm_init:pmagplotlib.clearFIG(HDD['irm'])
        if len(Bimag)>0:
            if verbose:print('plotting initial magnetization curve')
# first normalize by Ms
            Mnorm=[]
            for m in Mimag: Mnorm.append(old_div(m,float(hpars['hysteresis_ms_moment'])))
            if imag_init==0:
                HDD['imag']=4
                pmagplotlib.plot_init(HDD['imag'],5,5)
                imag_init=1
            pmagplotlib.plotIMAG(HDD['imag'],Bimag,Mnorm,imag_exp)
        else:
            if imag_init:pmagplotlib.clearFIG(HDD['imag'])
    #
        files={}
        if plots:
            if pltspec!="":s=pltspec
            files={}
            for key in list(HDD.keys()):
                files[key]=locname+'_'+s+'_'+key+'.'+fmt
            pmagplotlib.saveP(HDD,files)
            if pltspec!="":sys.exit()
        if verbose and PLT:
            pmagplotlib.drawFIGS(HDD)
            ans=input("S[a]ve plots, [s]pecimen name, [q]uit, <return> to continue\n ")
            if ans=="a":
                files={}
                for key in list(HDD.keys()):
                    files[key]=locname+'_'+s+'_'+key+'.'+fmt
                pmagplotlib.saveP(HDD,files)
            if ans=='':k+=1
            if ans=="p":
                del HystRecs[-1]
                k-=1
            if  ans=='q':
                print("Good bye")
                sys.exit()
            if ans=='s':
                keepon=1
                specimen=input('Enter desired specimen name (or first part there of): ')
                while keepon==1:
                    try:
                        k =sids.index(specimen)
                        keepon=0
                    except:
                        tmplist=[]
                        for qq in range(len(sids)):
                            if specimen in sids[qq]:tmplist.append(sids[qq])
                        print(specimen," not found, but this was: ")
                        print(tmplist)
                        specimen=input('Select one or try again\n ')
                        k =sids.index(specimen)
        else:
            k+=1
        if len(B)==0 and len(Bdcd)==0:
            if verbose:print('skipping this one - no hysteresis data')
            k+=1
    if rmag_out=="" and ans=='s' and verbose:
        really=input(" Do you want to overwrite the existing rmag_hystersis.txt file? 1/[0] ")
        if really=="":
            print('i thought not - goodbye')
            sys.exit()
        rmag_out="rmag_hysteresis.txt"
    if len(HystRecs)>0:
        pmag.magic_write(rmag_out,HystRecs,"rmag_hysteresis")
        if verbose:print("hysteresis parameters saved in ",rmag_out)
    if len(RemRecs)>0:
        pmag.magic_write(rmag_rem,RemRecs,"rmag_remanence")
        if verbose:print("remanence parameters saved in ",rmag_rem)
Esempio n. 46
0
def main():
    """
    NAME
        trmaq_magic.py

    DESCTIPTION
        does non-linear trm acquisisiton correction
  
    SYNTAX
        trmaq_magic.py [-h][-i][command line options]

    OPTIONS
        -h prints help message and quits
        -i allows interactive setting of file names
        -f MFILE, sets magic_measurements input file
        -ft TSPEC, sets thellier_specimens input file
        -F OUT, sets output for non-linear TRM acquisition corrected data


    DEFAULTS
        MFILE: trmaq_measurements.txt
        TSPEC: thellier_specimens.txt
        OUT: NLT_specimens.txt
    """
    meas_file = 'trmaq_measurements.txt'
    tspec = "thellier_specimens.txt"
    output = 'NLT_specimens.txt'
    if '-h' in sys.argv:
        print(main.__doc__)
        sys.exit()
    if '-i' in sys.argv:
        meas_file = input(
            "Input magic_measurements file name? [trmaq_measurements.txt] ")
        if meas_file == "": meas_file = "trmaq_measurements.txt"
        tspec = input(
            " thellier_specimens file name? [thellier_specimens.txt] ")
        if tspec == "": tspec = "thellier_specimens.txt"
        output = input(
            "File for non-linear TRM adjusted specimen data: [NLTspecimens.txt] "
        )
        if output == "": output = "NLT_specimens.txt"
    if '-f' in sys.argv:
        ind = sys.argv.index('-f')
        meas_file = sys.argv[ind + 1]
    if '-ft' in sys.argv:
        ind = sys.argv.index('-ft')
        tspec = sys.argv[ind + 1]
    if '-F' in sys.argv:
        ind = sys.argv.index('-F')
        output = sys.argv[ind + 1]
    #
    PLT = {'aq': 1}
    pmagplotlib.plot_init(PLT['aq'], 5, 5)
    #
    # get name of file from command line
    #
    comment = ""
    #
    #
    meas_data, file_type = pmag.magic_read(meas_file)
    if file_type != 'magic_measurements':
        print(file_type)
        print(file_type, "This is not a valid magic_measurements file ")
        sys.exit()
    sids = pmag.get_specs(meas_data)
    specimen = 0
    #
    # read in thellier_specimen data
    #
    nrm, file_type = pmag.magic_read(tspec)
    PmagSpecRecs = []
    while specimen < len(sids):
        #
        # find corresoponding paleointensity data for this specimen
        #
        s = sids[specimen]
        blab, best = "", ""
        for nrec in nrm:  # pick out the Banc data for this spec
            if nrec["er_specimen_name"] == s:
                blab = float(nrec["specimen_lab_field_dc"])
                best = float(nrec["specimen_int"])
                TrmRec = nrec
                break
        if blab == "":
            print("skipping ", s, " : no best ")
            specimen += 1
        else:
            print(sids[specimen], specimen + 1, 'of ', len(sids), 'Best = ',
                  best * 1e6)
            MeasRecs = []
            #
            # find the data from the meas_data file for this specimen
            #
            for rec in meas_data:
                if rec["er_specimen_name"] == s:
                    meths = rec["magic_method_codes"].split(":")
                    methcodes = []
                    for meth in meths:
                        methcodes.append(meth.strip())
                    if "LP-TRM" in methcodes: MeasRecs.append(rec)
            if len(MeasRecs) < 2:
                specimen += 1
                print('skipping specimen -  no trm acquisition data ', s)
    #
    #  collect info for the PmagSpecRec dictionary
    #
            else:
                TRMs, Bs = [], []
                for rec in MeasRecs:
                    Bs.append(float(rec['treatment_dc_field']))
                    TRMs.append(float(rec['measurement_magn_moment']))
                NLpars = nlt.NLtrm(
                    Bs, TRMs, best, blab, 0
                )  # calculate best fit parameters through TRM acquisition data, and get new banc
                #
                Mp, Bp = [], []
                for k in range(int(max(Bs) * 1e6)):
                    Bp.append(float(k) * 1e-6)
                    npred = nlt.TRM(
                        Bp[-1], NLpars['xopt'][0],
                        NLpars['xopt'][1])  # predicted NRM for this field
                    Mp.append(npred)
                pmagplotlib.plotTRM(PLT['aq'], Bs, TRMs, Bp, Mp, NLpars,
                                    rec['magic_experiment_name'])
                pmagplotlib.drawFIGS(PLT)
                print('Banc= ', float(NLpars['banc']) * 1e6)
                trmTC = {}
                for key in list(TrmRec.keys()):
                    trmTC[key] = TrmRec[
                        key]  # copy of info from thellier_specimens record
                trmTC['specimen_int'] = '%8.3e' % (NLpars['banc'])
                trmTC['magic_method_codes'] = TrmRec[
                    "magic_method_codes"] + ":DA-NL"
                PmagSpecRecs.append(trmTC)
                ans = input("Return for next specimen, s[a]ve plot  ")
                if ans == 'a':
                    Name = {'aq': rec['er_specimen_name'] + '_TRM.svg'}
                    pmagplotlib.saveP(PLT, Name)
                specimen += 1
    pmag.magic_write(output, PmagSpecRecs, 'pmag_specimens')
Esempio n. 47
0
def main():
    """
    NAME 
        plot_map_pts.py 

    DESCRIPTION
        plots points on map
 
    SYNTAX
        plot_map_pts.py [command line options]

    OPTIONS
        -h prints help and quits
        -sym [ro, bs, g^, r., b-, etc.] [1,5,10] symbol and size for points
           colors are r=red,b=blue,g=green, etc.
           symbols are '.' for points, ^, for triangle, s for square, etc.
            -, for lines, -- for dotted lines, see matplotlib online documentation for plot()
        -eye  ELAT ELON [specify eyeball location]
        -etp  put on topography
        -f FILE, specify input file
        -o color ocean blue/land green (default is not)
        -res [c,l,i,h] specify resolution (crude, low, intermediate, high]
        -fmt [pdf,eps, png] specify output format (default is pdf)
        -R don't plot details of rivers
        -B don't plot national/state boundaries, etc.
        -pad [LAT LON] pad bounding box by LAT/LON (default is not)
        -grd SPACE specify grid spacing
        -sav  save plot and quit
        -prj PROJ,  specify one of the supported projections: (see basemap.py online documentation)
            aeqd = Azimuthal Equidistant
            poly = Polyconic
            gnom = Gnomonic
            moll = Mollweide
            tmerc = Transverse Mercator
            nplaea = North-Polar Lambert Azimuthal
            mill = Miller Cylindrical
            merc = Mercator
            stere = Stereographic
            npstere = North-Polar Stereographic
            geos = Geostationary
            laea = Lambert Azimuthal Equal Area
            sinu = Sinusoidal
            spstere = South-Polar Stereographic
            lcc = Lambert Conformal
            npaeqd = North-Polar Azimuthal Equidistant
            eqdc = Equidistant Conic
            cyl = Cylindrical Equidistant
            omerc = Oblique Mercator
            aea = Albers Equal Area
            spaeqd = South-Polar Azimuthal Equidistant
            ortho = Orthographic
            cass= Cassini-Soldner
            splaea = South-Polar Lambert Azimuthal
            robin = Robinson
        Special codes for MagIC formatted input files:
            -n
            -l
    
    INPUTS
        space or tab delimited LON LAT data
        OR: 
           standard MagIC formatted er_sites or pmag_results table
    DEFAULTS
        res:  c
        prj: mollweide;  lcc for MagIC format files 
        ELAT,ELON = 0,0
        pad LAT,LON=0,0
        NB: high resolution or lines can be very slow
    
    """
    dir_path='.'
    plot=0
    ocean=0
    res='c'
    proj='moll'
    Lats,Lons=[],[]
    fmt='pdf'
    sym='ro'
    symsize=5
    fancy=0
    rivers,boundaries,ocean=1,1,0
    latmin,latmax,lonmin,lonmax,lat_0,lon_0=-90,90,0.,360.,0.,0.
    padlat,padlon,gridspace=0,0,30
    lat_0,lon_0="",""
    prn_name,prn_loc,names,locs=0,0,[],[]
    if '-WD' in sys.argv:
        ind = sys.argv.index('-WD')
        dir_path=sys.argv[ind+1]
    if '-h' in sys.argv:
        print(main.__doc__)
        sys.exit()
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt=sys.argv[ind+1]
    if '-res' in sys.argv:
        ind = sys.argv.index('-res')
        res=sys.argv[ind+1]
        if res!= 'c' and res!='l':
            print('this resolution will take a while - be patient')
    if '-etp' in sys.argv: fancy=1
    if '-sav' in sys.argv: plot=1
    if '-R' in sys.argv:rivers=0
    if '-B' in sys.argv:boundaries=0
    if '-o' in sys.argv:ocean=1
    if '-grd' in sys.argv:
        ind = sys.argv.index('-grd')
        gridspace=float(sys.argv[ind+1])
    if '-eye' in sys.argv:
        ind = sys.argv.index('-eye')
        lat_0=float(sys.argv[ind+1])
        lon_0=float(sys.argv[ind+2])
    if '-sym' in sys.argv:
        ind = sys.argv.index('-sym')
        sym=sys.argv[ind+1]
        symsize=int(sys.argv[ind+2])
    if '-pad' in sys.argv:
        ind = sys.argv.index('-pad')
        padlat=float(sys.argv[ind+1])
        padlon=float(sys.argv[ind+2])
    if '-f' in sys.argv:
        ind = sys.argv.index('-f')
        file=dir_path+'/'+sys.argv[ind+1]
        header=open(file,'r').readlines()[0].split('\t')
        if 'tab' in header[0]:
            if '-n' in sys.argv:prn_name=1
            if '-l' in sys.argv:prn_loc=1
            proj='lcc'
            if 'results' in header[1]:
                latkey='average_lat'
                lonkey='average_lon'
                namekey='pmag_result_name'
                lockey='er_location_names'
            elif 'sites' in header[1]:
                latkey='site_lat'
                lonkey='site_lon'
                namekey='er_site_name'
                lockey='er_location_name'
            else:  
                print('file type not supported')
                print(main.__doc__)
                sys.exit()
            Sites,file_type=pmag.magic_read(file)
            Lats=pmag.get_dictkey(Sites,latkey,'f')
            Lons=pmag.get_dictkey(Sites,lonkey,'f')
            if prn_name==1:names=pmag.get_dictkey(Sites,namekey,'')
            if prn_loc==1:names=pmag.get_dictkey(Sites,lockey,'')
        else:
            ptdata=numpy.loadtxt(file)
            Lons=ptdata.transpose()[0]
            Lats=ptdata.transpose()[1]
        latmin=numpy.min(Lats)-padlat
        lonmin=numpy.min(Lons)-padlon
        latmax=numpy.max(Lats)+padlat
        lonmax=numpy.max(Lons)+padlon
        if lon_0=="":
            lon_0=0.5*(lonmin+lonmax)
            lat_0=0.5*(latmin+latmax)
    else:
        print("input file must be specified")
        sys.exit()
    if '-prj' in sys.argv:
        ind = sys.argv.index('-prj')
        proj=sys.argv[ind+1]
    FIG={'map':1}
    pmagplotlib.plot_init(FIG['map'],6,6)
    if res=='c':skip=8
    if res=='l':skip=5
    if res=='i':skip=2
    if res=='h':skip=1
    cnt=0
    Opts={'latmin':latmin,'latmax':latmax,'lonmin':lonmin,'lonmax':lonmax,'lat_0':lat_0,'lon_0':lon_0,'proj':proj,'sym':sym,'symsize':3,'pltgrid':1,'res':res,'boundinglat':0.,'padlon':padlon,'padlat':padlat,'gridspace':gridspace}
    Opts['details']={}
    Opts['details']['coasts']=1
    Opts['details']['rivers']=rivers
    Opts['details']['states']=boundaries
    Opts['details']['countries']=boundaries
    Opts['details']['ocean']=ocean
    Opts['details']['fancy']=fancy
    if len(names)>0:Opts['names']=names
    if len(locs)>0:Opts['loc_name']=locs
    if proj=='merc':
        Opts['latmin']=-70
        Opts['latmax']=70
        Opts['lonmin']=-180
        Opts['lonmax']=180
    print('please wait to draw points')
    Opts['sym']=sym
    Opts['symsize']=symsize
    pmagplotlib.plotMAP(FIG['map'],Lats,Lons,Opts)
    files={}
    titles={}
    titles['map']='PT Map'
    for key in list(FIG.keys()):
        files[key]='Map_PTS'+'.'+fmt
    if pmagplotlib.isServer:
        black     = '#000000'
        purple    = '#800080'
        FIG = pmagplotlib.addBorders(FIG,titles,black,purple)
        pmagplotlib.saveP(FIG,files)
    if plot==1:
        pmagplotlib.saveP(FIG,files)
    else:
        pmagplotlib.drawFIGS(FIG)
        ans=input(" S[a]ve to save plot, Return to quit:  ")
        if ans=="a": pmagplotlib.saveP(FIG,files)
Esempio n. 48
0
def main():
    """
    NAME
        lowrie_magic.py

    DESCRIPTION
       plots intensity decay curves for Lowrie experiments

    SYNTAX 
        lowrie_magic.py -h [command line options]
    
    INPUT 
       takes magic_measurements formatted input files
    
    OPTIONS
        -h prints help message and quits
        -f FILE: specify input file, default is magic_measurements.txt
        -N do not normalize by maximum magnetization
        -fmt [svg, pdf, eps, png] specify fmt, default is svg
        -sav saves plots and quits
    """
    fmt, plot = 'svg', 0
    FIG = {}  # plot dictionary
    FIG['lowrie'] = 1  # demag is figure 1
    pmagplotlib.plot_init(FIG['lowrie'], 6, 6)
    norm = 1  # default is to normalize by maximum axis
    in_file, dir_path = 'magic_measurements.txt', '.'
    if len(sys.argv) > 1:
        if '-WD' in sys.argv:
            ind = sys.argv.index('-WD')
            dir_path = sys.argv[ind + 1]
        if '-h' in sys.argv:
            print(main.__doc__)
            sys.exit()
        if '-N' in sys.argv: norm = 0  # don't normalize
        if '-sav' in sys.argv: plot = 1  # don't normalize
        if '-fmt' in sys.argv:  # sets input filename
            ind = sys.argv.index("-fmt")
            fmt = sys.argv[ind + 1]
        if '-f' in sys.argv:  # sets input filename
            ind = sys.argv.index("-f")
            in_file = sys.argv[ind + 1]
    else:
        print(main.__doc__)
        print('you must supply a file name')
        sys.exit()
    in_file = dir_path + '/' + in_file
    print(in_file)
    PmagRecs, file_type = pmag.magic_read(in_file)
    if file_type != "magic_measurements":
        print('bad input file')
        sys.exit()
    PmagRecs = pmag.get_dictitem(PmagRecs, 'magic_method_codes', 'LP-IRM-3D',
                                 'has')  # get all 3D IRM records
    if len(PmagRecs) == 0:
        print('no records found')
        sys.exit()
    specs = pmag.get_dictkey(PmagRecs, 'er_specimen_name', '')
    sids = []
    for spec in specs:
        if spec not in sids:
            sids.append(spec)  # get list of unique specimen names
    for spc in sids:  # step through the specimen names
        print(spc)
        specdata = pmag.get_dictitem(PmagRecs, 'er_specimen_name', spc,
                                     'T')  # get all this one's data
        DIMs, Temps = [], []
        for dat in specdata:  # step through the data
            DIMs.append([
                float(dat['measurement_dec']),
                float(dat['measurement_inc']),
                float(dat['measurement_magn_moment'])
            ])
            Temps.append(float(dat['treatment_temp']) - 273.)
        carts = pmag.dir2cart(DIMs).transpose()
        if norm == 1:  # want to normalize
            nrm = (DIMs[0][2])  # normalize by NRM
            ylab = "M/M_o"
        else:
            nrm = 1.  # don't normalize
            ylab = "Magnetic moment (Am^2)"
        xlab = "Temperature (C)"
        pmagplotlib.plotXY(FIG['lowrie'],
                           Temps,
                           old_div(abs(carts[0]), nrm),
                           sym='r-')
        pmagplotlib.plotXY(FIG['lowrie'],
                           Temps,
                           old_div(abs(carts[0]), nrm),
                           sym='ro')  # X direction
        pmagplotlib.plotXY(FIG['lowrie'],
                           Temps,
                           old_div(abs(carts[1]), nrm),
                           sym='c-')
        pmagplotlib.plotXY(FIG['lowrie'],
                           Temps,
                           old_div(abs(carts[1]), nrm),
                           sym='cs')  # Y direction
        pmagplotlib.plotXY(FIG['lowrie'],
                           Temps,
                           old_div(abs(carts[2]), nrm),
                           sym='k-')
        pmagplotlib.plotXY(FIG['lowrie'],
                           Temps,
                           old_div(abs(carts[2]), nrm),
                           sym='k^',
                           title=spc,
                           xlab=xlab,
                           ylab=ylab)  # Z direction
        files = {'lowrie': 'lowrie:_' + spc + '_.' + fmt}
        if plot == 0:
            pmagplotlib.drawFIGS(FIG)
            ans = input('S[a]ve figure? [q]uit, <return> to continue   ')
            if ans == 'a':
                pmagplotlib.saveP(FIG, files)
            elif ans == 'q':
                sys.exit()
        else:
            pmagplotlib.saveP(FIG, files)
        pmagplotlib.clearFIG(FIG['lowrie'])
Esempio n. 49
0
def main():
    """
    NAME
        chi_magic.py

    DESCRIPTION
        plots magnetic susceptibility as a function of frequency and temperature and AC field

    SYNTAX
        chi_magic.py [command line options]

    OPTIONS
        -h prints help message and quits
        -i allows interactive setting of FILE and temperature step
        -f FILE, specify magic_measurements format file
        -T IND, specify temperature step to plot
        -e EXP, specify experiment name to plot
        -fmt [svg,jpg,png,pdf] set figure format [default is svg]
        -sav save figure and quit

    DEFAULTS
         FILE: magic_measurements.txt
         IND: first 
         SPEC: step through one by one
    """
    cont,FTinit,BTinit,k="",0,0,0
    meas_file="magic_measurements.txt"
    spec=""
    Tind,cont=0,""
    EXP=""
    fmt='svg' # default image type for saving
    plot=0
    if '-h' in sys.argv:
        print(main.__doc__)
        sys.exit()
    if '-i' in sys.argv:
        file=input("Input magic_measurements file name? [magic_measurements.txt]  ")
        if file!="":meas_file=file
    if '-e' in sys.argv:
        ind=sys.argv.index('-e')
        EXP=sys.argv[ind+1]
    if '-f' in sys.argv:
        ind=sys.argv.index('-f')
        meas_file=sys.argv[ind+1]
    if '-T' in sys.argv:
        ind=sys.argv.index('-T')
        Tind=int(sys.argv[ind+1])
    if '-fmt'  in sys.argv:
        ind=sys.argv.index('-fmt')
        fmt=sys.argv[ind+1]
    if '-sav' in sys.argv:plot=1
    #
    meas_data,file_type=pmag.magic_read(meas_file)
    #
    # get list of unique experiment names
    #
    # initialize some variables (a continuation flag, plot initialization flags and the experiment counter
    experiment_names=[]
    for rec in meas_data:
        if rec['magic_experiment_name'] not in experiment_names:experiment_names.append(rec['magic_experiment_name'])
    #
    # hunt through by experiment name
    if EXP!="":
        try:
            k=experiment_names.index(EXP)
        except:
            print("Bad experiment name")
            sys.exit()
    while k < len(experiment_names):
        e=experiment_names[k]
        if EXP=="":print(e, k+1 , 'out of ',len(experiment_names))
    #
    #  initialize lists of data, susceptibility, temperature, frequency and field
        X,T,F,B=[],[],[],[]
        for rec in  meas_data:
            methcodes=rec['magic_method_codes']
            meths=methcodes.strip().split(':')
            if rec['magic_experiment_name']==e and "LP-X" in meths: # looking for chi measurement
                if 'measurement_temp' not in list(rec.keys()):rec['measurement_temp']='300' # set defaults
                if 'measurement_freq' not in list(rec.keys()):rec['measurement_freq']='0' # set defaults
                if 'measurement_lab_field_ac' not in list(rec.keys()):rec['measurement_lab_field_ac']='0' # set default
                X.append(float(rec['measurement_x']))
                T.append(float(rec['measurement_temp']))
                F.append(float(rec['measurement_freq']))
                B.append(float(rec['measurement_lab_field_ac']))
    #
    # get unique list of Ts,Fs, and Bs
    #
        Ts,Fs,Bs=[],[],[]
        for k in range(len(X)):   # hunt through all the measurements
            if T[k] not in Ts:Ts.append(T[k])  # append if not in list
            if F[k] not in Fs:Fs.append(F[k])
            if B[k] not in Bs:Bs.append(B[k])
        Ts.sort() # sort list of temperatures, frequencies and fields
        Fs.sort()
        Bs.sort()
        if '-x' in sys.argv:
            k=len(experiment_names)+1 # just plot the one
        else:
            k+=1  # increment experiment number
    #
    # plot chi versus T and F holding B constant
    #  
        plotnum=1  # initialize plot number to 1
        if len(X)>2:  # if there are any data to plot, continue
            b=Bs[-1]  # keeping field constant and at maximum
            XTF=[] # initialize list of chi versus Temp and freq
            for f in Fs:   # step through frequencies sequentially
                XT=[]  # initialize list of chi versus temp
                for kk in range(len(X)): # hunt through all the data
                    if F[kk]==f and B[kk]==b:  # select data with given freq and field
                        XT.append([X[kk],T[kk]]) # append to list
                XTF.append(XT) # append list to list of frequencies
            if len(XT)>1: # if there are any temperature dependent data
                pmagplotlib.plot_init(plotnum,5,5) # initialize plot
                pmagplotlib.plotXTF(plotnum,XTF,Fs,e,b) # call the plotting function
                if plot==0:pmagplotlib.drawFIGS({'fig':plotnum}) #make it visible
                plotnum+=1 # increment plot number
            f=Fs[0] # set frequency to minimum
            XTB=[] # initialize list if chi versus Temp and field
            for b in Bs:  # step through field values
                XT=[] # initial chi versus temp list for this field
                for kk in range(len(X)): # hunt through all the data
                    if F[kk]==f and B[kk]==b: # select data with given freq and field  
                        XT.append([X[kk],T[kk]]) # append to list
                XTB.append(XT)
            if len(XT)>1: # if there are any temperature dependent data
                pmagplotlib.plot_init(plotnum,5,5) # set up plot
                pmagplotlib.plotXTB(plotnum,XTB,Bs,e,f) # call the plotting function
                if plot==0:pmagplotlib.drawFIGS({'fig':plotnum})
                plotnum+=1 # increment plot number
            if '-i' in sys.argv: 
                for ind in range(len(Ts)):  # print list of temperatures available
                    print(ind,int(Ts[ind])) 
                cont=input("Enter index of desired temperature step, s[a]ve plots, [return] to quit ")
                if cont=='a':
                        files={}
                        PLTS={}
                        for p in range(1,plotnum):
                            key=str(p)
                            files[key]=e+'_'+key+'.'+fmt
                            PLTS[key]=key
                        pmagplotlib.saveP(PLTS,files)
                        cont=input("Enter index of desired temperature step, s[a]ve plots, [return] to quit ")
                if cont=="":cont='q'
            while cont!="q":
                if '-i' in sys.argv:Tind=int(cont) # set temperature index
                b=Bs[-1] # set field to max available
                XF=[] # initial chi versus frequency list
                for kk in range(len(X)): # hunt through the data
                    if T[kk]==Ts[Tind] and B[kk]==b:  # if temperature and field match,
                        XF.append([X[kk],F[kk]]) # append the data
                if len(XF)>1: # if there are any data to plot
                    if FTinit==0: # if not already initialized, initialize plot
                        #print 'initializing ',plotnum 
                        pmagplotlib.plot_init(plotnum,5,5)
                        FTinit=1 
                        XFplot=plotnum
                        plotnum+=1 # increment plotnum
                    pmagplotlib.plotXFT(XFplot,XF,Ts[Tind],e,b)
                    if plot==0:pmagplotlib.drawFIGS({'fig':plotnum})
                else:
                    print('\n *** Skipping susceptibitily-frequency plot as a function of temperature *** \n')
                f=Fs[0] # set frequency to minimum available
                XB=[] # initialize chi versus field list
                for kk in range(len(X)): # hunt through the data
                    if T[kk]==Ts[Tind] and F[kk]==f:  # if temperature and field match those desired
                        XB.append([X[kk],B[kk]]) # append the data to list
                if len(XB)>4: # if there are any data
                    if BTinit==0: # if plot not already initialized
                        pmagplotlib.plot_init(plotnum,5,5) # do it
                        BTinit=1 
                    pmagplotlib.plotXBT(plotnum,XB,Ts[Tind],e,f) # and call plotting function 
                    if plot==0:pmagplotlib.drawFIGS({'fig':plotnum})
                else:
                    print('Skipping susceptibitily - AC field plot as a function of temperature')
                files={}
                PLTS={}
                for p in range(1,plotnum):
                    key=str(p)
                    files[key]=e+'_'+key+'.'+fmt
                    PLTS[key]=p
                if '-i' in sys.argv:
                    for ind in range(len(Ts)): # just in case you forgot, print out a new list of temperatures
                        print(ind,int(Ts[ind])) 
                    cont=input("Enter index of next temperature step, s[a]ve plots,  [return] to quit ") # ask for new temp
                    if cont=="":sys.exit()
                    if cont=='a':
                        pmagplotlib.saveP(PLTS,files)
                        cont=input("Enter index of desired temperature step, s[a]ve plots, [return] to quit ")
                        if cont=="":sys.exit()
                elif plot==0:
                    ans=input("enter s[a]ve to save files,  [return] to quit ")
                    if ans=='a': 
                        pmagplotlib.saveP(PLTS,files)
                        sys.exit()
                    else:
                        sys.exit()
                else:
                   pmagplotlib.saveP(PLTS,files)
                   sys.exit()
Esempio n. 50
0
def main():
    """
    NAME
        hysteresis_magic.py

    DESCRIPTION
        calculates hystereis parameters and saves them in rmag_hystereis format file
        makes plots if option selected

    SYNTAX
        hysteresis_magic.py [command line options]

    OPTIONS
        -h prints help message and quits
        -usr USER:   identify user, default is ""
        -f: specify input file, default is agm_measurements.txt
        -fh: specify rmag_hysteresis.txt input file
        -F: specify output file, default is rmag_hysteresis.txt
        -P: do not make the plots
        -spc SPEC: specify specimen name to plot and quit
        -sav save all plots and quit
        -fmt [png,svg,eps,jpg]
    """
    args = sys.argv
    PLT = 1
    plots = 0
    user, meas_file, rmag_out, rmag_file = "", "agm_measurements.txt", "rmag_hysteresis.txt", ""
    pltspec = ""
    dir_path = '.'
    fmt = 'svg'
    verbose = pmagplotlib.verbose
    version_num = pmag.get_version()
    if '-WD' in args:
        ind = args.index('-WD')
        dir_path = args[ind + 1]
    if "-h" in args:
        print main.__doc__
        sys.exit()
    if "-usr" in args:
        ind = args.index("-usr")
        user = args[ind + 1]
    if '-f' in args:
        ind = args.index("-f")
        meas_file = args[ind + 1]
    if '-F' in args:
        ind = args.index("-F")
        rmag_out = args[ind + 1]
    if '-fh' in args:
        ind = args.index("-fh")
        rmag_file = args[ind + 1]
        rmag_file = dir_path + '/' + rmag_file
    if '-P' in args:
        PLT = 0
        irm_init, imag_init = -1, -1
    if '-sav' in args:
        verbose = 0
        plots = 1
    if '-spc' in args:
        ind = args.index("-spc")
        pltspec = args[ind + 1]
        verbose = 0
        plots = 1
    if '-fmt' in args:
        ind = args.index("-fmt")
        fmt = args[ind + 1]
    rmag_out = dir_path + '/' + rmag_out
    meas_file = dir_path + '/' + meas_file
    rmag_rem = dir_path + "/rmag_remanence.txt"
    #
    #
    meas_data, file_type = pmag.magic_read(meas_file)
    if file_type != 'magic_measurements':
        print main.__doc__
        print 'bad file'
        sys.exit()
    #
    # initialize some variables
    # define figure numbers for hyst,deltaM,DdeltaM curves
    HystRecs, RemRecs = [], []
    HDD = {}
    if verbose:
        if verbose and PLT:
            print "Plots may be on top of each other - use mouse to place "
    if PLT:
        HDD['hyst'], HDD['deltaM'], HDD['DdeltaM'] = 1, 2, 3
        pmagplotlib.plot_init(HDD['DdeltaM'], 5, 5)
        pmagplotlib.plot_init(HDD['deltaM'], 5, 5)
        pmagplotlib.plot_init(HDD['hyst'], 5, 5)
        imag_init = 0
        irm_init = 0
    else:
        HDD['hyst'], HDD['deltaM'], HDD['DdeltaM'], HDD['irm'], HDD[
            'imag'] = 0, 0, 0, 0, 0
    #
    if rmag_file != "": hyst_data, file_type = pmag.magic_read(rmag_file)
    #
    # get list of unique experiment names and specimen names
    #
    experiment_names, sids = [], []
    for rec in meas_data:
        meths = rec['magic_method_codes'].split(':')
        methods = []
        for meth in meths:
            methods.append(meth.strip())
        if 'LP-HYS' in methods:
            if 'er_synthetic_name' in rec.keys(
            ) and rec['er_synthetic_name'] != "":
                rec['er_specimen_name'] = rec['er_synthetic_name']
            if rec['magic_experiment_name'] not in experiment_names:
                experiment_names.append(rec['magic_experiment_name'])
            if rec['er_specimen_name'] not in sids:
                sids.append(rec['er_specimen_name'])
    #
    k = 0
    locname = ''
    if pltspec != "":
        k = sids.index(pltspec)
        print sids[k]
    while k < len(sids):
        s = sids[k]
        if verbose and PLT: print s, k + 1, 'out of ', len(sids)
        #
        #
        B, M, Bdcd, Mdcd = [], [], [], [
        ]  #B,M for hysteresis, Bdcd,Mdcd for irm-dcd data
        Bimag, Mimag = [], []  #Bimag,Mimag for initial magnetization curves
        first_dcd_rec, first_rec, first_imag_rec = 1, 1, 1
        for rec in meas_data:
            methcodes = rec['magic_method_codes'].split(':')
            meths = []
            for meth in methcodes:
                meths.append(meth.strip())
            if rec['er_specimen_name'] == s and "LP-HYS" in meths:
                B.append(float(rec['measurement_lab_field_dc']))
                M.append(float(rec['measurement_magn_moment']))
                if first_rec == 1:
                    e = rec['magic_experiment_name']
                    HystRec = {}
                    first_rec = 0
                    if "er_location_name" in rec.keys():
                        HystRec["er_location_name"] = rec["er_location_name"]
                        locname = rec['er_location_name'].replace('/', '-')
                    if "er_sample_name" in rec.keys():
                        HystRec["er_sample_name"] = rec["er_sample_name"]
                    if "er_site_name" in rec.keys():
                        HystRec["er_site_name"] = rec["er_site_name"]
                    if "er_synthetic_name" in rec.keys(
                    ) and rec['er_synthetic_name'] != "":
                        HystRec["er_synthetic_name"] = rec["er_synthetic_name"]
                    else:
                        HystRec["er_specimen_name"] = rec["er_specimen_name"]
            if rec['er_specimen_name'] == s and "LP-IRM-DCD" in meths:
                Bdcd.append(float(rec['treatment_dc_field']))
                Mdcd.append(float(rec['measurement_magn_moment']))
                if first_dcd_rec == 1:
                    RemRec = {}
                    irm_exp = rec['magic_experiment_name']
                    first_dcd_rec = 0
                    if "er_location_name" in rec.keys():
                        RemRec["er_location_name"] = rec["er_location_name"]
                    if "er_sample_name" in rec.keys():
                        RemRec["er_sample_name"] = rec["er_sample_name"]
                    if "er_site_name" in rec.keys():
                        RemRec["er_site_name"] = rec["er_site_name"]
                    if "er_synthetic_name" in rec.keys(
                    ) and rec['er_synthetic_name'] != "":
                        RemRec["er_synthetic_name"] = rec["er_synthetic_name"]
                    else:
                        RemRec["er_specimen_name"] = rec["er_specimen_name"]
            if rec['er_specimen_name'] == s and "LP-IMAG" in meths:
                if first_imag_rec == 1:
                    imag_exp = rec['magic_experiment_name']
                    first_imag_rec = 0
                Bimag.append(float(rec['measurement_lab_field_dc']))
                Mimag.append(float(rec['measurement_magn_moment']))
    #
    # now plot the hysteresis curve
    #
        if len(B) > 0:
            hmeths = []
            for meth in meths:
                hmeths.append(meth)
            hpars = pmagplotlib.plotHDD(HDD, B, M, e)
            if verbose and PLT: pmagplotlib.drawFIGS(HDD)
            #
            # get prior interpretations from hyst_data
            if rmag_file != "":
                hpars_prior = {}
                for rec in hyst_data:
                    if rec['magic_experiment_names'] == e:
                        if rec['hysteresis_bcr'] != "" and rec[
                                'hysteresis_mr_moment'] != "":
                            hpars_prior['hysteresis_mr_moment'] = rec[
                                'hysteresis_mr_moment']
                            hpars_prior['hysteresis_ms_moment'] = rec[
                                'hysteresis_ms_moment']
                            hpars_prior['hysteresis_bc'] = rec['hysteresis_bc']
                            hpars_prior['hysteresis_bcr'] = rec[
                                'hysteresis_bcr']
                            break
                if verbose: pmagplotlib.plotHPARS(HDD, hpars_prior, 'ro')
            else:
                if verbose: pmagplotlib.plotHPARS(HDD, hpars, 'bs')
                HystRec['hysteresis_mr_moment'] = hpars['hysteresis_mr_moment']
                HystRec['hysteresis_ms_moment'] = hpars['hysteresis_ms_moment']
                HystRec['hysteresis_bc'] = hpars['hysteresis_bc']
                HystRec['hysteresis_bcr'] = hpars['hysteresis_bcr']
                HystRec['hysteresis_xhf'] = hpars['hysteresis_xhf']
                HystRec['magic_experiment_names'] = e
                HystRec['magic_software_packages'] = version_num
                if hpars["magic_method_codes"] not in hmeths:
                    hmeths.append(hpars["magic_method_codes"])
                methods = ""
                for meth in hmeths:
                    methods = methods + meth.strip() + ":"
                HystRec["magic_method_codes"] = methods[:-1]
                HystRec["er_citation_names"] = "This study"
                HystRecs.append(HystRec)
    #
        if len(Bdcd) > 0:
            rmeths = []
            for meth in meths:
                rmeths.append(meth)
            if verbose and PLT: print 'plotting IRM'
            if irm_init == 0:
                HDD['irm'] = 5
                pmagplotlib.plot_init(HDD['irm'], 5, 5)
                irm_init = 1
            rpars = pmagplotlib.plotIRM(HDD['irm'], Bdcd, Mdcd, irm_exp)
            RemRec['remanence_mr_moment'] = rpars['remanence_mr_moment']
            RemRec['remanence_bcr'] = rpars['remanence_bcr']
            RemRec['magic_experiment_names'] = irm_exp
            if rpars["magic_method_codes"] not in meths:
                meths.append(rpars["magic_method_codes"])
            methods = ""
            for meth in rmeths:
                methods = methods + meth.strip() + ":"
            RemRec["magic_method_codes"] = methods[:-1]
            RemRec["er_citation_names"] = "This study"
            RemRecs.append(RemRec)
        else:
            if irm_init: pmagplotlib.clearFIG(HDD['irm'])
        if len(Bimag) > 0:
            if verbose: print 'plotting initial magnetization curve'
            # first normalize by Ms
            Mnorm = []
            for m in Mimag:
                Mnorm.append(m / float(hpars['hysteresis_ms_moment']))
            if imag_init == 0:
                HDD['imag'] = 4
                pmagplotlib.plot_init(HDD['imag'], 5, 5)
                imag_init = 1
            pmagplotlib.plotIMAG(HDD['imag'], Bimag, Mnorm, imag_exp)
        else:
            if imag_init: pmagplotlib.clearFIG(HDD['imag'])
    #
        files = {}
        if plots:
            if pltspec != "": s = pltspec
            files = {}
            for key in HDD.keys():
                files[key] = locname + '_' + s + '_' + key + '.' + fmt
            pmagplotlib.saveP(HDD, files)
            if pltspec != "": sys.exit()
        if verbose and PLT:
            pmagplotlib.drawFIGS(HDD)
            ans = raw_input(
                "S[a]ve plots, [s]pecimen name, [q]uit, <return> to continue\n "
            )
            if ans == "a":
                files = {}
                for key in HDD.keys():
                    files[key] = locname + '_' + s + '_' + key + '.' + fmt
                pmagplotlib.saveP(HDD, files)
            if ans == '': k += 1
            if ans == "p":
                del HystRecs[-1]
                k -= 1
            if ans == 'q':
                print "Good bye"
                sys.exit()
            if ans == 's':
                keepon = 1
                specimen = raw_input(
                    'Enter desired specimen name (or first part there of): ')
                while keepon == 1:
                    try:
                        k = sids.index(specimen)
                        keepon = 0
                    except:
                        tmplist = []
                        for qq in range(len(sids)):
                            if specimen in sids[qq]: tmplist.append(sids[qq])
                        print specimen, " not found, but this was: "
                        print tmplist
                        specimen = raw_input('Select one or try again\n ')
                        k = sids.index(specimen)
        else:
            k += 1
        if len(B) == 0 and len(Bdcd) == 0:
            if verbose: print 'skipping this one - no hysteresis data'
            k += 1
    if rmag_out == "" and ans == 's' and verbose:
        really = raw_input(
            " Do you want to overwrite the existing rmag_hystersis.txt file? 1/[0] "
        )
        if really == "":
            print 'i thought not - goodbye'
            sys.exit()
        rmag_out = "rmag_hysteresis.txt"
    if len(HystRecs) > 0:
        pmag.magic_write(rmag_out, HystRecs, "rmag_hysteresis")
        if verbose: print "hysteresis parameters saved in ", rmag_out
    if len(RemRecs) > 0:
        pmag.magic_write(rmag_rem, RemRecs, "rmag_remanence")
        if verbose: print "remanence parameters saved in ", rmag_rem
Esempio n. 51
0
def main():
    """
    NAME 
        vgpmap_magic.py 

    DESCRIPTION
        makes a map of vgps and a95/dp,dm for site means in a pmag_results table
 
    SYNTAX
        vgpmap_magic.py [command line options]

    OPTIONS
        -h prints help and quits
        -eye  ELAT ELON [specify eyeball location], default is 90., 0.
        -f FILE pmag_results format file, [default is pmag_results.txt] 
        -res [c,l,i,h] specify resolution (crude, low, intermediate, high]
        -etp plot the etopo20 topographpy data (requires high resolution data set)
        -prj PROJ,  specify one of the following:
             ortho = orthographic
             lcc = lambert conformal
             moll = molweide
             merc = mercator
        -sym SYM SIZE: choose a symbol and size, examples: 
            ro 5 : small red circles
            bs 10 : intermediate blue squares
            g^ 20 : large green triangles
        -ell  plot dp/dm or a95 ellipses
        -rev RSYM RSIZE : flip reverse poles to normal antipode 
        -S:  plot antipodes of all poles
        -age : plot the ages next to the poles
        -crd [g,t] : choose coordinate system, default is to plot all site VGPs
        -fmt [pdf, png, eps...] specify output format, default is pdf
        -sav  save and quit    
    DEFAULTS
        FILE: pmag_results.txt
        res:  c
        prj: ortho 
        ELAT,ELON = 0,0
        SYM SIZE: ro 8
        RSYM RSIZE: g^ 8
    
    """
    dir_path = '.'
    res, ages = 'c', 0
    plot = 0
    proj = 'ortho'
    results_file = 'pmag_results.txt'
    ell, flip = 0, 0
    lat_0, lon_0 = 90., 0.
    fmt = 'pdf'
    sym, size = 'ro', 8
    rsym, rsize = 'g^', 8
    anti = 0
    fancy = 0
    coord = ""
    if '-WD' in sys.argv:
        ind = sys.argv.index('-WD')
        dir_path = sys.argv[ind + 1]
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-S' in sys.argv: anti = 1
    if '-fmt' in sys.argv:
        ind = sys.argv.index('-fmt')
        fmt = sys.argv[ind + 1]
    if '-sav' in sys.argv: plot = 1
    if '-res' in sys.argv:
        ind = sys.argv.index('-res')
        res = sys.argv[ind + 1]
    if '-etp' in sys.argv: fancy = 1
    if '-prj' in sys.argv:
        ind = sys.argv.index('-prj')
        proj = sys.argv[ind + 1]
    if '-rev' in sys.argv:
        flip = 1
        ind = sys.argv.index('-rev')
        rsym = (sys.argv[ind + 1])
        rsize = int(sys.argv[ind + 2])
    if '-sym' in sys.argv:
        ind = sys.argv.index('-sym')
        sym = (sys.argv[ind + 1])
        size = int(sys.argv[ind + 2])
    if '-eye' in sys.argv:
        ind = sys.argv.index('-eye')
        lat_0 = float(sys.argv[ind + 1])
        lon_0 = float(sys.argv[ind + 2])
    if '-ell' in sys.argv: ell = 1
    if '-age' in sys.argv: ages = 1
    if '-f' in sys.argv:
        ind = sys.argv.index('-f')
        results_file = sys.argv[ind + 1]
    if '-crd' in sys.argv:
        ind = sys.argv.index('-crd')
        crd = sys.argv[ind + 1]
        if crd == 'g': coord = '0'
        if crd == 't': coord = '100'
    results_file = dir_path + '/' + results_file
    data, file_type = pmag.magic_read(results_file)
    if file_type != 'pmag_results':
        print "bad results file"
        sys.exit()
    FIG = {'map': 1}
    pmagplotlib.plot_init(FIG['map'], 6, 6)
    # read in er_sites file
    lats, lons, dp, dm, a95 = [], [], [], [], []
    Pars = []
    dates, rlats, rlons = [], [], []
    if 'data_type' in data[0].keys():
        Results = pmag.get_dictitem(data, 'data_type', 'i',
                                    'T')  # get all site level data
    else:
        Results = data
    Results = pmag.get_dictitem(Results, 'vgp_lat', '',
                                'F')  # get all non-blank latitudes
    Results = pmag.get_dictitem(Results, 'vgp_lon', '',
                                'F')  # get all non-blank longitudes
    if coord != "":
        Results = pmag.get_dictitem(Results, 'tilt_correction', coord,
                                    'T')  # get specified coordinate system
    location = ""
    for rec in Results:
        if rec['er_location_names'] not in location:
            location = location + ':' + rec['er_location_names']
        if 'average_age' in rec.keys(
        ) and rec['average_age'] != "" and ages == 1:
            dates.append(rec['average_age'])
        lat = float(rec['vgp_lat'])
        lon = float(rec['vgp_lon'])
        if flip == 0:
            lats.append(lat)
            lons.append(lon)
        elif flip == 1:
            if lat < 0:
                rlats.append(-lat)
                lon = lon + 180.
                if lon > 360: lon = lon - 360.
                rlons.append(lon)
            else:
                lats.append(lat)
                lons.append(lon)
        elif anti == 1:
            lats.append(-lat)
            lon = lon + 180.
            if lon > 360: lon = lon - 360.
            lons.append(lon)
        ppars = []
        ppars.append(lon)
        ppars.append(lat)
        ell1, ell2 = "", ""
        if 'vgp_dm' in rec.keys() and rec['vgp_dm'] != "":
            ell1 = float(rec['vgp_dm'])
        if 'vgp_dp' in rec.keys() and rec['vgp_dp'] != "":
            ell2 = float(rec['vgp_dp'])
        if 'vgp_alpha95' in rec.keys() and rec['vgp_alpha95'] != "":
            ell1, ell2 = float(rec['vgp_alpha95']), float(rec['vgp_alpha95'])
        if ell1 != "" and ell2 != "":
            ppars = []
            ppars.append(lons[-1])
            ppars.append(lats[-1])
            ppars.append(ell1)
            ppars.append(lons[-1])
            isign = abs(lats[-1]) / lats[-1]
            ppars.append(lats[-1] - isign * 90.)
            ppars.append(ell2)
            ppars.append(lons[-1] + 90.)
            ppars.append(0.)
            Pars.append(ppars)
    location = location.strip(':')
    Opts = {
        'latmin': -90,
        'latmax': 90,
        'lonmin': 0.,
        'lonmax': 360.,
        'lat_0': lat_0,
        'lon_0': lon_0,
        'proj': proj,
        'sym': 'bs',
        'symsize': 3,
        'pltgrid': 0,
        'res': res,
        'boundinglat': 0.
    }
    Opts['details'] = {
        'coasts': 1,
        'rivers': 0,
        'states': 0,
        'countries': 0,
        'ocean': 1,
        'fancy': fancy
    }
    pmagplotlib.plotMAP(
        FIG['map'], [90.], [0.],
        Opts)  # make the base map with a blue triangle at the pole`
    Opts['pltgrid'] = -1
    Opts['sym'] = sym
    Opts['symsize'] = size
    if len(dates) > 0: Opts['names'] = dates
    if len(lats) > 0:
        pmagplotlib.plotMAP(FIG['map'], lats, lons,
                            Opts)  # add the lats and lons of the poles
    Opts['names'] = []
    if len(rlats) > 0:
        Opts['sym'] = rsym
        Opts['symsize'] = rsize
        pmagplotlib.plotMAP(FIG['map'], rlats, rlons,
                            Opts)  # add the lats and lons of the poles
    if plot == 0:
        pmagplotlib.drawFIGS(FIG)
    if ell == 1:  # add ellipses if desired.
        Opts['details'] = {
            'coasts': 0,
            'rivers': 0,
            'states': 0,
            'countries': 0,
            'ocean': 0
        }
        Opts['pltgrid'] = -1  # turn off meridian replotting
        Opts['symsize'] = 2
        Opts['sym'] = 'g-'
        for ppars in Pars:
            if ppars[2] != 0:
                PTS = pmagplotlib.plotELL(FIG['map'], ppars, 'g.', 0, 0)
                elats, elons = [], []
                for pt in PTS:
                    elons.append(pt[0])
                    elats.append(pt[1])
                pmagplotlib.plotMAP(
                    FIG['map'], elats, elons, Opts
                )  # make the base map with a blue triangle at the pole`
                if plot == 0: pmagplotlib.drawFIGS(FIG)
    files = {}
    for key in FIG.keys():
        files[key] = 'LO:_' + location + '_VGP_map.' + fmt
    if pmagplotlib.isServer:
        black = '#000000'
        purple = '#800080'
        titles = {}
        titles['eq'] = 'LO:_' + location + '_VGP_map'
        FIG = pmagplotlib.addBorders(FIG, titles, black, purple)
        pmagplotlib.saveP(FIG, files)
    elif plot == 0:
        pmagplotlib.drawFIGS(FIG)
        ans = raw_input(" S[a]ve to save plot, Return to quit:  ")
        if ans == "a":
            pmagplotlib.saveP(FIG, files)
        else:
            print "Good bye"
            sys.exit()
    else:
        pmagplotlib.saveP(FIG, files)
Esempio n. 52
0
def main():
    """
    NAME
       foldtest.py

    DESCRIPTION
       does a fold test (Tauxe, 2010) on data

    INPUT FORMAT
       dec inc dip_direction dip

    SYNTAX
       foldtest.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f FILE file with input data
        -F FILE for confidence bounds on fold test
        -u ANGLE (circular standard deviation) for uncertainty on bedding poles
        -b MIN MAX bounds for quick search of percent untilting [default is -10 to 150%]
        -n NB  number of bootstrap samples [default is 1000]
        -fmt FMT, specify format - default is svg
        -sav  save figures and quit
    INPUT FILE
	Dec Inc Dip_Direction Dip  in space delimited file

    OUTPUT PLOTS
        Geographic: is an equal area projection of the input data in
                    original coordinates
        Stratigraphic: is an equal area projection of the input data in
                    tilt adjusted coordinates
        % Untilting: The dashed (red) curves are representative plots of
                    maximum eigenvalue (tau_1) as a function of untilting
                    The solid line is the cumulative distribution of the
                    % Untilting required to maximize tau for all the
                    bootstrapped data sets.  The dashed vertical lines
                    are 95% confidence bounds on the % untilting that yields
                   the most clustered result (maximum tau_1).
        Command line: prints out the bootstrapped iterations and
                   finally the confidence bounds on optimum untilting.
        If the 95% conf bounds include 0, then a post-tilt magnetization is indicated
        If the 95% conf bounds include 100, then a pre-tilt magnetization is indicated
        If the 95% conf bounds exclude both 0 and 100, syn-tilt magnetization is
                possible as is vertical axis rotation or other pathologies
        Geographic: is an equal area projection of the input data in

    OPTIONAL OUTPUT FILE:
       The output file has the % untilting within the 95% confidence bounds
nd the number of bootstrap samples
    """
    kappa=0
    fmt,plot='svg',0
    nb=1000 # number of bootstraps
    min,max=-10,150
    if '-h' in sys.argv: # check if help is needed
        print main.__doc__
        sys.exit() # graceful quit
    if '-F' in sys.argv:
        ind=sys.argv.index('-F')
        outfile=open(sys.argv[ind+1],'w')
    else:
        outfile=""
    if '-f' in sys.argv:
        ind=sys.argv.index('-f')
        file=sys.argv[ind+1]
        DIDDs=numpy.loadtxt(file)
    else:
        print main.__doc__
        sys.exit()
    if '-fmt' in sys.argv:
        ind=sys.argv.index('-fmt')
        fmt=sys.argv[ind+1]
    if '-sav' in sys.argv:plot=1
    if '-b' in sys.argv:
        ind=sys.argv.index('-b')
        min=int(sys.argv[ind+1])
        max=int(sys.argv[ind+2])
    if '-n' in sys.argv:
        ind=sys.argv.index('-n')
        nb=int(sys.argv[ind+1])
    if '-u' in sys.argv:
        ind=sys.argv.index('-u')
        csd=float(sys.argv[ind+1])
        kappa=(81./csd)**2
    #
    # get to work
    #
    PLTS={'geo':1,'strat':2,'taus':3} # make plot dictionary
    pmagplotlib.plot_init(PLTS['geo'],5,5)
    pmagplotlib.plot_init(PLTS['strat'],5,5)
    pmagplotlib.plot_init(PLTS['taus'],5,5)
    pmagplotlib.plotEQ(PLTS['geo'],DIDDs,'Geographic')
    D,I=pmag.dotilt_V(DIDDs)
    TCs=numpy.array([D,I]).transpose()
    pmagplotlib.plotEQ(PLTS['strat'],TCs,'Stratigraphic')
    if plot==0:pmagplotlib.drawFIGS(PLTS)
    Percs=range(min,max)
    Cdf,Untilt=[],[]
    pylab.figure(num=PLTS['taus'])
    print 'doing ',nb,' iterations...please be patient.....'
    for n in range(nb): # do bootstrap data sets - plot first 25 as dashed red line
            if n%50==0:print n
            Taus=[] # set up lists for taus
            PDs=pmag.pseudo(DIDDs)
            if kappa!=0:
                for k in range(len(PDs)):
                    d,i=pmag.fshdev(kappa)
                    dipdir,dip=pmag.dodirot(d,i,PDs[k][2],PDs[k][3])
                    PDs[k][2]=dipdir
                    PDs[k][3]=dip
            for perc in Percs:
                tilt=numpy.array([1.,1.,1.,0.01*perc])
                D,I=pmag.dotilt_V(PDs*tilt)
                TCs=numpy.array([D,I]).transpose()
                ppars=pmag.doprinc(TCs) # get principal directions
                Taus.append(ppars['tau1'])
            if n<25:pylab.plot(Percs,Taus,'r--')
            Untilt.append(Percs[Taus.index(numpy.max(Taus))]) # tilt that gives maximum tau
            Cdf.append(float(n)/float(nb))
    pylab.plot(Percs,Taus,'k')
    pylab.xlabel('% Untilting')
    pylab.ylabel('tau_1 (red), CDF (green)')
    Untilt.sort() # now for CDF of tilt of maximum tau
    pylab.plot(Untilt,Cdf,'g')
    lower=int(.025*nb)
    upper=int(.975*nb)
    pylab.axvline(x=Untilt[lower],ymin=0,ymax=1,linewidth=1,linestyle='--')
    pylab.axvline(x=Untilt[upper],ymin=0,ymax=1,linewidth=1,linestyle='--')
    tit= '%i - %i %s'%(Untilt[lower],Untilt[upper],'Percent Unfolding')
    print tit
    print 'range of all bootstrap samples: ', Untilt[0], ' - ', Untilt[-1]
    pylab.title(tit)
    outstring= '%i - %i; %i\n'%(Untilt[lower],Untilt[upper],nb)
    if outfile!="":outfile.write(outstring)
    files={}
    for key in PLTS.keys():
        files[key]=('foldtest_'+'%s'%(key.strip()[:2])+'.'+fmt)
    if plot==0:
        pmagplotlib.drawFIGS(PLTS)
        ans= raw_input('S[a]ve all figures, <Return> to quit   ')
        if ans!='a':
            print "Good bye"
            sys.exit()
    pmagplotlib.saveP(PLTS,files)
Esempio n. 53
0
def main():
    """
    NAME
        thellier_magic.py
    
    DESCRIPTION
        plots Thellier-Thellier, allowing interactive setting of bounds
        and customizing of selection criteria.  Saves and reads interpretations
        from a pmag_specimen formatted table, default: thellier_specimens.txt

    SYNTAX 
        thellier_magic.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f MEAS, set magic_measurements input file
        -fsp PRIOR, set pmag_specimen prior interpretations file
        -fan ANIS, set rmag_anisotropy file for doing the anisotropy corrections
        -fcr CRIT, set criteria file for grading.  
        -fmt [svg,png,jpg], format for images - default is svg
        -sav,  saves plots with out review (default format)
        -spc SPEC, plots single specimen SPEC, saves plot with specified format
            with optional -b bounds adn quits
        -b BEG END: sets  bounds for calculation
           BEG: starting step for slope calculation
           END: ending step for slope calculation
        -z use only z component difference for pTRM calculation
        
    DEFAULTS
        MEAS: magic_measurements.txt
        REDO: thellier_redo
        CRIT: NONE
        PRIOR: NONE
  
    OUTPUT 
        figures:
            ALL:  numbers refer to temperature steps in command line window
            1) Arai plot:  closed circles are zero-field first/infield
                           open circles are infield first/zero-field
                           triangles are pTRM checks
                           squares are pTRM tail checks
                           VDS is vector difference sum
                           diamonds are bounds for interpretation
            2) Zijderveld plot:  closed (open) symbols are X-Y (X-Z) planes
                                 X rotated to NRM direction
            3) (De/Re)Magnetization diagram:
                           circles are NRM remaining
                           squares are pTRM gained
            4) equal area projections:
 			   green triangles are pTRM gained direction
                           red (purple) circles are lower(upper) hemisphere of ZI step directions 
                           blue (cyan) squares are lower(upper) hemisphere IZ step directions 
            5) Optional:  TRM acquisition
            6) Optional: TDS normalization
        command line window:
            list is: temperature step numbers, temperatures (C), Dec, Inc, Int (units of magic_measuements)
                     list of possible commands: type letter followed by return to select option
                     saving of plots creates .svg format files with specimen_name, plot type as name
    """ 
#
#   initializations
#
    meas_file,critout,inspec="magic_measurements.txt","","thellier_specimens.txt"
    first=1
    inlt=0
    version_num=pmag.get_version()
    TDinit,Tinit,field,first_save=0,0,-1,1
    user,comment,AniSpec,locname="",'',"",""
    ans,specimen,recnum,start,end=0,0,0,0,0
    plots,pmag_out,samp_file,style=0,"","","svg"
    verbose=pmagplotlib.verbose 
    fmt='.'+style
#
# default acceptance criteria
#
    accept=pmag.default_criteria(0)[0] # set the default criteria
#
# parse command line options
#
    Zdiff,anis=0,0
    spc,BEG,END="","",""
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-f' in sys.argv:
        ind=sys.argv.index('-f')
        meas_file=sys.argv[ind+1]
    if '-fsp' in sys.argv:
        ind=sys.argv.index('-fsp')
        inspec=sys.argv[ind+1]
    if '-fan' in sys.argv:
        ind=sys.argv.index('-fan')
        anisfile=sys.argv[ind+1]
        anis=1
        anis_data,file_type=pmag.magic_read(anisfile)
        if verbose: print "Anisotropy data read in from ", anisfile
    if '-fmt' in sys.argv:
        ind=sys.argv.index('-fmt')
        fmt='.'+sys.argv[ind+1]
    if '-dpi' in sys.argv:
        ind=sys.argv.index('-dpi')
        dpi='.'+sys.argv[ind+1]
    else: dpi=100
    if '-sav' in sys.argv: 
        plots=1
        verbose=0
    if '-z' in sys.argv: Zdiff=1
    if '-spc' in sys.argv:
        ind=sys.argv.index('-spc')
        spc=sys.argv[ind+1]
        if '-b' in sys.argv:
            ind=sys.argv.index('-b')
            BEG=int(sys.argv[ind+1])
            END=int(sys.argv[ind+2])
    if '-fcr' in sys.argv:
        ind=sys.argv.index('-fcr')
        critout=sys.argv[ind+1]
        crit_data,file_type=pmag.magic_read(critout)
        if file_type!='pmag_criteria':
            if verbose: print 'bad pmag_criteria file, using no acceptance criteria'
            accept=pmag.default_criteria(1)[0]
        else:
            if verbose: print "Acceptance criteria read in from ", critout
            accept={'pmag_criteria_code':'ACCEPTANCE','er_citation_names':'This study'}
            for critrec in crit_data:
                if 'sample_int_sigma_uT' in critrec.keys(): # accommodate Shaar's new criterion
                    critrec['sample_int_sigma']='%10.3e'%(eval(critrec['sample_int_sigma_uT'])*1e-6)
                for key in critrec.keys():
                    if key not in accept.keys() and critrec[key]!='':
                        accept[key]=critrec[key]
    try:
        open(inspec,'rU')
        PriorRecs,file_type=pmag.magic_read(inspec)
        if file_type != 'pmag_specimens':
            print file_type
            print file_type,inspec," is not a valid pmag_specimens file " 
            sys.exit()
        for rec in PriorRecs:
            if 'magic_software_packages' not in rec.keys():rec['magic_software_packages']=""
    except IOError:
        PriorRecs=[]
        if verbose:print "starting new specimen interpretation file: ",inspec
    meas_data,file_type=pmag.magic_read(meas_file)
    if file_type != 'magic_measurements':
        print file_type
        print file_type,"This is not a valid magic_measurements file " 
        sys.exit()
    backup=0
    # define figure numbers for arai, zijderveld and 
    #   de-,re-magization diagrams
    AZD={}
    AZD['deremag'], AZD['zijd'],AZD['arai'],AZD['eqarea']=1,2,3,4
    pmagplotlib.plot_init(AZD['arai'],5,5)
    pmagplotlib.plot_init(AZD['zijd'],5,5)
    pmagplotlib.plot_init(AZD['deremag'],5,5)
    pmagplotlib.plot_init(AZD['eqarea'],5,5)
    #
    #
    #
    # get list of unique specimen names
    #
    CurrRec=[]
    sids=pmag.get_specs(meas_data)
    # get plots for specimen s - default is just to step through arai diagrams
    #
    if spc!="": specimen =sids.index(spc)
    while specimen < len(sids):
        methcodes=[]
       
        if verbose:
            print sids[specimen],specimen+1, 'of ', len(sids)
        MeasRecs=[]
        s=sids[specimen]
        datablock,trmblock,tdsrecs=[],[],[]
        PmagSpecRec={}
        if first==0:
           for key in keys:PmagSpecRec[key]="" # make sure all new records have same set of keys
        PmagSpecRec["er_analyst_mail_names"]=user
        PmagSpecRec["specimen_correction"]='u'
    #
    # find the data from the meas_data file for this specimen
    #
        for rec in meas_data:
            if rec["er_specimen_name"]==s:
                MeasRecs.append(rec)
                if "magic_method_codes" not in rec.keys():
                    rec["magic_method_codes"]=""
                methods=rec["magic_method_codes"].split(":")
                meths=[]
                for meth in methods:
                    meths.append(meth.strip()) # take off annoying spaces
                methods=""
                for meth in meths:
                    if meth.strip() not in methcodes and "LP-" in meth:methcodes.append(meth.strip())
                    methods=methods+meth+":"
                methods=methods[:-1]
                rec["magic_method_codes"]=methods 
                if "LP-PI-TRM" in meths: datablock.append(rec)
                if "LP-TRM" in meths: trmblock.append(rec)
                if "LP-TRM-TD" in meths: tdsrecs.append(rec)
        if len(trmblock)>2 and inspec!="":
            if Tinit==0:
                Tinit=1
                AZD['TRM']=5
                pmagplotlib.plot_init(AZD['TRM'],5,5)
        elif Tinit==1: # clear the TRM figure if not needed
            pmagplotlib.clearFIG(AZD['TRM'])
        if len(tdsrecs)>2:
            if TDinit==0:
                TDinit=1
                AZD['TDS']=6
                pmagplotlib.plot_init(AZD['TDS'],5,5)
        elif TDinit==1: # clear the TDS figure if not needed
            pmagplotlib.clearFIG(AZD['TDS'])
        if len(datablock) <4:
           if backup==0:
               specimen+=1
               if verbose:
                   print 'skipping specimen - moving forward ', s
           else:
               specimen-=1
               if verbose:
                   print 'skipping specimen - moving backward ', s
    #
    #  collect info for the PmagSpecRec dictionary
    #
        else:
           rec=datablock[0]
           PmagSpecRec["er_citation_names"]="This study"
           PmagSpecRec["er_specimen_name"]=s
           PmagSpecRec["er_sample_name"]=rec["er_sample_name"]
           PmagSpecRec["er_site_name"]=rec["er_site_name"]
           PmagSpecRec["er_location_name"]=rec["er_location_name"]
           locname=rec['er_location_name'].replace('/','-')
           if "er_expedition_name" in rec.keys():PmagSpecRec["er_expedition_name"]=rec["er_expedition_name"]
           if "magic_instrument_codes" not in rec.keys():rec["magic_instrument_codes"]=""
           PmagSpecRec["magic_instrument_codes"]=rec["magic_instrument_codes"]
           PmagSpecRec["measurement_step_unit"]="K"
           if "magic_experiment_name" not in rec.keys():
               rec["magic_experiment_name"]=""
           else:
               PmagSpecRec["magic_experiment_names"]=rec["magic_experiment_name"]
    
           meths=rec["magic_method_codes"].split()
       # sort data into types
           araiblock,field=pmag.sortarai(datablock,s,Zdiff)
           first_Z=araiblock[0]
           GammaChecks=araiblock[5]
           if len(first_Z)<3:
               if backup==0:
                   specimen+=1
                   if verbose:
                       print 'skipping specimen - moving forward ', s
               else:
                   specimen-=1
                   if verbose:
                       print 'skipping specimen - moving backward ', s
           else:
               backup=0
               zijdblock,units=pmag.find_dmag_rec(s,meas_data)
               recnum=0
               if verbose:
                   print "index step Dec   Inc  Int       Gamma"
                   for plotrec in zijdblock:
                       if GammaChecks!="":
                           gamma=""
                           for g in GammaChecks:
                               if g[0]==plotrec[0]-273:
                                   gamma=g[1]
                                   break
                       if gamma!="":
                           print '%i     %i %7.1f %7.1f %8.3e %7.1f' % (recnum,plotrec[0]-273,plotrec[1],plotrec[2],plotrec[3],gamma)
                       else:
                           print '%i     %i %7.1f %7.1f %8.3e ' % (recnum,plotrec[0]-273,plotrec[1],plotrec[2],plotrec[3])
                       recnum += 1
               pmagplotlib.plotAZ(AZD,araiblock,zijdblock,s,units[0])
               if verbose:pmagplotlib.drawFIGS(AZD)
               if len(tdsrecs)>2: # a TDS experiment
                   tdsblock=[] # make a list for the TDS  data
                   Mkeys=['measurement_magnitude','measurement_magn_moment','measurement_magn_volume','measuruement_magn_mass']
                   mkey,k="",0
                   while mkey=="" and k<len(Mkeys)-1: # find which type of intensity
                       key= Mkeys[k]
                       if key in tdsrecs[0].keys() and tdsrecs[0][key]!="": mkey=key
                       k+=1
                   if mkey=="":break # get outta here
                   Tnorm=""
                   for tdrec in tdsrecs:
                       meths=tdrec['magic_method_codes'].split(":")
                       for meth in meths: meth.replace(" ","") # strip off potential nasty spaces
                       if  'LT-T-I' in meths and Tnorm=="": # found first total TRM 
                           Tnorm=float(tdrec[mkey]) # normalize by total TRM 
                           tdsblock.append([273,zijdblock[0][3]/Tnorm,1.]) # put in the zero step
                       if  'LT-T-Z' in meths and Tnorm!="": # found a LP-TRM-TD demag step, now need complementary LT-T-Z from zijdblock
                           step=float(tdrec['treatment_temp'])
                           Tint=""
                           if mkey!="":
                               Tint=float(tdrec[mkey])
                           if Tint!="":
                               for zrec in zijdblock:
                                   if zrec[0]==step:  # found matching
                                       tdsblock.append([step,zrec[3]/Tnorm,Tint/Tnorm])
                                       break
                   if len(tdsblock)>2: 
                       pmagplotlib.plotTDS(AZD['TDS'],tdsblock,s+':LP-PI-TDS:')
                       if verbose:pmagplotlib(drawFIGS(AZD)) 
                   else: 
                       print "Something wrong here"
               if anis==1:   # look up anisotropy data for this specimen
                   AniSpec=""
                   for aspec in anis_data:
                       if aspec["er_specimen_name"]==PmagSpecRec["er_specimen_name"]:
                           AniSpec=aspec
                           if verbose: print 'Found anisotropy record...'
                           break
               if inspec !="":
                   if verbose: print 'Looking up saved interpretation....'
                   found = 0
                   for k in range(len(PriorRecs)):
                       try:
                         if PriorRecs[k]["er_specimen_name"]==s:
                           found =1
                           CurrRec.append(PriorRecs[k])
                           for j in range(len(zijdblock)):
                               if float(zijdblock[j][0])==float(PriorRecs[k]["measurement_step_min"]):start=j
                               if float(zijdblock[j][0])==float(PriorRecs[k]["measurement_step_max"]):end=j
                           pars,errcode=pmag.PintPars(datablock,araiblock,zijdblock,start,end,accept)
                           pars['measurement_step_unit']="K"
                           pars['experiment_type']='LP-PI-TRM'
                           del PriorRecs[k]  # put in CurrRec, take out of PriorRecs
                           if errcode!=1:
                               pars["specimen_lab_field_dc"]=field
                               pars["specimen_int"]=-1*field*pars["specimen_b"]
                               pars["er_specimen_name"]=s
                               if verbose:
                                   print 'Saved interpretation: '
                               pars,kill=pmag.scoreit(pars,PmagSpecRec,accept,'',verbose)
                               pmagplotlib.plotB(AZD,araiblock,zijdblock,pars)
                               if verbose:pmagplotlib.drawFIGS(AZD)
                               if len(trmblock)>2:
                                   blab=field
                                   best=pars["specimen_int"]
                                   Bs,TRMs=[],[]
                                   for trec in trmblock:
                                       Bs.append(float(trec['treatment_dc_field']))
                                       TRMs.append(float(trec['measurement_magn_moment']))
                                   NLpars=nlt.NLtrm(Bs,TRMs,best,blab,0) # calculate best fit parameters through TRM acquisition data, and get new banc
                                   Mp,Bp=[],[]
                                   for k in  range(int(max(Bs)*1e6)):
                                       Bp.append(float(k)*1e-6)
                                       npred=nlt.TRM(Bp[-1],NLpars['xopt'][0],NLpars['xopt'][1]) # predicted NRM for this field
                                       Mp.append(npred)
                                   pmagplotlib.plotTRM(AZD['TRM'],Bs,TRMs,Bp,Mp,NLpars,trec['magic_experiment_name'])
                                   PmagSpecRec['specimen_int']=NLpars['banc'] 
                                   if verbose:
                                       print 'Banc= ',float(NLpars['banc'])*1e6
                                       pmagplotlib.drawFIGS(AZD)
                               mpars=pmag.domean(araiblock[1],start,end,'DE-BFL')
                               if verbose:
                                       print 'pTRM direction= ','%7.1f'%(mpars['specimen_dec']),' %7.1f'%(mpars['specimen_inc']),' MAD:','%7.1f'%(mpars['specimen_mad'])
                               if AniSpec!="":
                                   CpTRM=pmag.Dir_anis_corr([mpars['specimen_dec'],mpars['specimen_inc']],AniSpec)
                                   AniSpecRec=pmag.doaniscorr(PmagSpecRec,AniSpec)
                                   if verbose:
                                       print 'Anisotropy corrected TRM direction= ','%7.1f'%(CpTRM[0]),' %7.1f'%(CpTRM[1])
                                       print 'Anisotropy corrected intensity= ',float(AniSpecRec['specimen_int'])*1e6
                           else:
                               print 'error on specimen ',s
                       except:
                         pass
                   if verbose and found==0: print  '    None found :(  ' 
               if spc!="":
                   if BEG!="": 
                       pars,errcode=pmag.PintPars(datablock,araiblock,zijdblock,BEG,END,accept)
                       pars['measurement_step_unit']="K"
                       pars["specimen_lab_field_dc"]=field
                       pars["specimen_int"]=-1*field*pars["specimen_b"]
                       pars["er_specimen_name"]=s
                       pars['specimen_grade']='' # ungraded
                       pmagplotlib.plotB(AZD,araiblock,zijdblock,pars)
                       if verbose:pmagplotlib.drawFIGS(AZD)
                       if len(trmblock)>2:
                           if inlt==0:
                               inlt=1
                           blab=field
                           best=pars["specimen_int"]
                           Bs,TRMs=[],[]
                           for trec in trmblock:
                               Bs.append(float(trec['treatment_dc_field']))
                               TRMs.append(float(trec['measurement_magn_moment']))
                           NLpars=nlt.NLtrm(Bs,TRMs,best,blab,0) # calculate best fit parameters through TRM acquisition data, and get new banc
    #
                           Mp,Bp=[],[]
                           for k in  range(int(max(Bs)*1e6)):
                               Bp.append(float(k)*1e-6)
                               npred=nlt.TRM(Bp[-1],NLpars['xopt'][0],NLpars['xopt'][1]) # predicted NRM for this field
                   files={}
                   for key in AZD.keys():
                       files[key]=s+'_'+key+fmt 
                   pmagplotlib.saveP(AZD,files,dpi=dpi)
                   sys.exit()
               if verbose:
                   ans='b'
                   while ans != "":
                       print """
               s[a]ve plot, set [b]ounds for calculation, [d]elete current interpretation, [p]revious, [s]ample, [q]uit:
               """
                       ans=raw_input('Return for next specimen \n')
                       if ans=="": 
                           specimen +=1
                       if ans=="d": 
                           save_redo(PriorRecs,inspec)
                           CurrRec=[]
                           pmagplotlib.plotAZ(AZD,araiblock,zijdblock,s,units[0])
                           if verbose:pmagplotlib.drawFIGS(AZD)
                       if ans=='a':
                           files={}
                           for key in AZD.keys():
                               files[key]="LO:_"+locname+'_SI:_'+PmagSpecRec['er_site_name']+'_SA:_'+PmagSpecRec['er_sample_name']+'_SP:_'+s+'_CO:_s_TY:_'+key+fmt
                           pmagplotlib.saveP(AZD,files)
                           ans=""
                       if ans=='q':
                           print "Good bye"
                           sys.exit()
                       if ans=='p':
                           specimen =specimen -1
                           backup = 1
                           ans=""
                       if ans=='s':
                           keepon=1
                           spec=raw_input('Enter desired specimen name (or first part there of): ')
                           while keepon==1:
                               try:
                                   specimen =sids.index(spec)
                                   keepon=0
                               except:
                                   tmplist=[]
                                   for qq in range(len(sids)):
                                       if spec in sids[qq]:tmplist.append(sids[qq])
                                   print specimen," not found, but this was: "
                                   print tmplist
                                   spec=raw_input('Select one or try again\n ')
                           ans=""
                       if  ans=='b':
                           if end==0 or end >=len(zijdblock):end=len(zijdblock)-1
                           GoOn=0
                           while GoOn==0:
                               answer=raw_input('Enter index of first point for calculation: ['+str(start)+']  ')
                               try:
                                   start=int(answer)
                                   answer=raw_input('Enter index  of last point for calculation: ['+str(end)+']  ')
                                   end=int(answer)
                                   if start >=0 and start <len(zijdblock)-2 and end >0 and end <len(zijdblock) or start>=end:
                                       GoOn=1
                                   else:
                                       print "Bad endpoints - try again! "
                                       start,end=0,len(zijdblock)
                               except ValueError:
                                   print "Bad endpoints - try again! "
                                   start,end=0,len(zijdblock)
                           s=sids[specimen] 
                           pars,errcode=pmag.PintPars(datablock,araiblock,zijdblock,start,end,accept)
                           pars['measurement_step_unit']="K"
                           pars["specimen_lab_field_dc"]=field
                           pars["specimen_int"]=-1*field*pars["specimen_b"]
                           pars["er_specimen_name"]=s
                           pars,kill=pmag.scoreit(pars,PmagSpecRec,accept,'',0)
                           PmagSpecRec['specimen_scat']=pars['specimen_scat']
                           PmagSpecRec['specimen_frac']='%5.3f'%(pars['specimen_frac'])
                           PmagSpecRec['specimen_gmax']='%5.3f'%(pars['specimen_gmax'])
                           PmagSpecRec["measurement_step_min"]='%8.3e' % (pars["measurement_step_min"])
                           PmagSpecRec["measurement_step_max"]='%8.3e' % (pars["measurement_step_max"])
                           PmagSpecRec["measurement_step_unit"]="K"
                           PmagSpecRec["specimen_int_n"]='%i'%(pars["specimen_int_n"])
                           PmagSpecRec["specimen_lab_field_dc"]='%8.3e'%(pars["specimen_lab_field_dc"])
                           PmagSpecRec["specimen_int"]='%9.4e '%(pars["specimen_int"])
                           PmagSpecRec["specimen_b"]='%5.3f '%(pars["specimen_b"])
                           PmagSpecRec["specimen_q"]='%5.1f '%(pars["specimen_q"])
                           PmagSpecRec["specimen_f"]='%5.3f '%(pars["specimen_f"])
                           PmagSpecRec["specimen_fvds"]='%5.3f'%(pars["specimen_fvds"])
                           PmagSpecRec["specimen_b_beta"]='%5.3f'%(pars["specimen_b_beta"])
                           PmagSpecRec["specimen_int_mad"]='%7.1f'%(pars["specimen_int_mad"])
                           PmagSpecRec["specimen_Z"]='%7.1f'%(pars["specimen_Z"])
                           PmagSpecRec["specimen_gamma"]='%7.1f'%(pars["specimen_gamma"])
                           PmagSpecRec["specimen_grade"]=pars["specimen_grade"]
                           if pars["method_codes"]!="":
                               tmpcodes=pars["method_codes"].split(":")
                               for t in tmpcodes:
                                   if t.strip() not in methcodes:methcodes.append(t.strip())
                           PmagSpecRec["specimen_dec"]='%7.1f'%(pars["specimen_dec"])
                           PmagSpecRec["specimen_inc"]='%7.1f'%(pars["specimen_inc"])
                           PmagSpecRec["specimen_tilt_correction"]='-1'
                           PmagSpecRec["specimen_direction_type"]='l'
                           PmagSpecRec["direction_type"]='l' # this is redundant, but helpful - won't be imported
                           PmagSpecRec["specimen_int_dang"]='%7.1f '%(pars["specimen_int_dang"])
                           PmagSpecRec["specimen_drats"]='%7.1f '%(pars["specimen_drats"])
                           PmagSpecRec["specimen_drat"]='%7.1f '%(pars["specimen_drat"])
                           PmagSpecRec["specimen_int_ptrm_n"]='%i '%(pars["specimen_int_ptrm_n"])
                           PmagSpecRec["specimen_rsc"]='%6.4f '%(pars["specimen_rsc"])
                           PmagSpecRec["specimen_md"]='%i '%(int(pars["specimen_md"]))
                           if PmagSpecRec["specimen_md"]=='-1':PmagSpecRec["specimen_md"]=""
                           PmagSpecRec["specimen_b_sigma"]='%5.3f '%(pars["specimen_b_sigma"])
                           if "IE-TT" not in  methcodes:methcodes.append("IE-TT")
                           methods=""
                           for meth in methcodes:
                               methods=methods+meth+":"
                           PmagSpecRec["magic_method_codes"]=methods[:-1]
                           PmagSpecRec["specimen_description"]=comment
                           PmagSpecRec["magic_software_packages"]=version_num
                           pmagplotlib.plotAZ(AZD,araiblock,zijdblock,s,units[0])
                           pmagplotlib.plotB(AZD,araiblock,zijdblock,pars)
                           if verbose:pmagplotlib.drawFIGS(AZD)
                           if len(trmblock)>2:
                               blab=field
                               best=pars["specimen_int"]
                               Bs,TRMs=[],[]
                               for trec in trmblock:
                                   Bs.append(float(trec['treatment_dc_field']))
                                   TRMs.append(float(trec['measurement_magn_moment']))
                               NLpars=nlt.NLtrm(Bs,TRMs,best,blab,0) # calculate best fit parameters through TRM acquisition data, and get new banc
                               Mp,Bp=[],[]
                               for k in  range(int(max(Bs)*1e6)):
                                   Bp.append(float(k)*1e-6)
                                   npred=nlt.TRM(Bp[-1],NLpars['xopt'][0],NLpars['xopt'][1]) # predicted NRM for this field
                                   Mp.append(npred)
                               pmagplotlib.plotTRM(AZD['TRM'],Bs,TRMs,Bp,Mp,NLpars,trec['magic_experiment_name'])
                               if verbose:
                                   print 'Non-linear TRM corrected intensity= ',float(NLpars['banc'])*1e6
                           if verbose:pmagplotlib.drawFIGS(AZD)
                           pars["specimen_lab_field_dc"]=field
                           pars["specimen_int"]=-1*field*pars["specimen_b"]
                           pars,kill=pmag.scoreit(pars,PmagSpecRec,accept,'',verbose)
                           saveit=raw_input("Save this interpretation? [y]/n \n")
                           if saveit!='n':
                               PriorRecs.append(PmagSpecRec) # put back an interpretation
                               specimen+=1
                               save_redo(PriorRecs,inspec)
                           ans=""
               elif plots==1:
                   specimen+=1
                   if fmt != ".pmag":
                       files={}
                       for key in AZD.keys():
                           files[key]="LO:_"+locname+'_SI:_'+PmagSpecRec['er_site_name']+'_SA:_'+PmagSpecRec['er_sample_name']+'_SP:_'+s+'_CO:_s_TY:_'+key+'_'+fmt
                       if pmagplotlib.isServer:
                           black     = '#000000'
                           purple    = '#800080'
                           titles={}
                           titles['deremag']='DeReMag Plot'
                           titles['zijd']='Zijderveld Plot'
                           titles['arai']='Arai Plot'
                           AZD = pmagplotlib.addBorders(AZD,titles,black,purple)
                       pmagplotlib.saveP(AZD,files,dpi=dpi)
    #                   pmagplotlib.combineFigs(s,files,3)
                   else:  # save in pmag format 
                       script="grep "+s+" output.mag | thellier -mfsi"
                       script=script+' %8.4e'%(field)
                       min='%i'%((pars["measurement_step_min"]-273))
                       Max='%i'%((pars["measurement_step_max"]-273))
                       script=script+" "+min+" "+Max
                       script=script+" |plotxy;cat mypost >>thellier.ps\n"
                       pltf.write(script)
                       pmag.domagicmag(outf,MeasRecs)
        if len(CurrRec)>0:
            for rec in CurrRec:
                PriorRecs.append(rec)
        CurrRec=[]
    if plots!=1 and verbose:
        ans=raw_input(" Save last plot? 1/[0] ")
        if ans=="1":
            if fmt != ".pmag":
                files={}
                for key in AZD.keys():
                    files[key]=s+'_'+key+fmt
                pmagplotlib.saveP(AZD,files,dpi=dpi)
        else:
            print "\n Good bye\n"
            sys.exit()
        if len(CurrRec)>0:PriorRecs.append(CurrRec) # put back an interpretation
        if len(PriorRecs)>0:
            save_redo(PriorRecs,inspec)
            print 'Updated interpretations saved in ',inspec
    if verbose:
        print "Good bye"
Esempio n. 54
0
def main():
    """
    NAME
        zeq_magic.py

    DESCRIPTION
        reads in magic_measurements formatted file, makes plots of remanence decay
        during demagnetization experiments.  Reads in prior interpretations saved in
        a pmag_specimens formatted file [and  allows re-interpretations of best-fit lines
        and planes and saves (revised or new) interpretations in a pmag_specimens file.
        interpretations are saved in the coordinate system used. Also allows judicious editting of
        measurements to eliminate "bad" measurements.  These are marked as such in the magic_measurements
        input file.  they are NOT deleted, just ignored. ] Bracketed part not yet implemented

    SYNTAX
        zeq_magic.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f  MEASFILE: sets measurements format input file, default: measurements.txt
        -fsp SPECFILE: sets specimens format file with prior interpreations, default: specimens.txt
        -fsa SAMPFILE: sets samples format file sample=>site information, default: samples.txt
        -fsi SITEFILE: sets sites format file with site=>location informationprior interpreations, default: samples.txt
        -Fp PLTFILE: sets filename for saved plot, default is name_type.fmt (where type is zijd, eqarea or decay curve)
        -crd [s,g,t]: sets coordinate system,  g=geographic, t=tilt adjusted, default: specimen coordinate system
        -spc SPEC  plots single specimen SPEC, saves plot with specified format
              with optional -dir settings and quits
        -dir [L,P,F][beg][end]: sets calculation type for principal component analysis, default is none
             beg: starting step for PCA calculation
             end: ending step for PCA calculation
             [L,P,F]: calculation type for line, plane or fisher mean
             must be used with -spc option
        -fmt FMT: set format of saved plot [png,svg,jpg]
        -A:  suppresses averaging of  replicate measurements, default is to average
        -sav: saves all plots without review
    SCREEN OUTPUT:
        Specimen, N, a95, StepMin, StepMax, Dec, Inc, calculation type

    """
    # initialize some variables
    doave, e, b = 1, 0, 0  # average replicates, initial end and beginning step
    intlist = ['magn_moment', 'magn_volume', 'magn_mass', 'magnitude']
    plots, coord = 0, 's'
    noorient = 0
    version_num = pmag.get_version()
    verbose = pmagplotlib.verbose
    calculation_type, fmt = "", "svg"
    user, spec_keys, locname = "", [], ''
    geo, tilt, ask = 0, 0, 0
    PriorRecs = []  # empty list for prior interpretations
    backup = 0
    specimen = ""  # can skip everything and just plot one specimen with bounds e,b
    if '-h' in sys.argv:
        print(main.__doc__)
        sys.exit()
    dir_path = pmag.get_named_arg_from_sys("-WD", default_val=os.getcwd())
    meas_file = pmag.get_named_arg_from_sys("-f",
                                            default_val="measurements.txt")
    spec_file = pmag.get_named_arg_from_sys("-fsp",
                                            default_val="specimens.txt")
    samp_file = pmag.get_named_arg_from_sys("-fsa", default_val="samples.txt")
    site_file = pmag.get_named_arg_from_sys("-fsi", default_val="sites.txt")
    #meas_file = os.path.join(dir_path, meas_file)
    #spec_file = os.path.join(dir_path, spec_file)
    #samp_file = os.path.join(dir_path, samp_file)
    #site_file = os.path.join(dir_path, site_file)
    plot_file = pmag.get_named_arg_from_sys("-Fp", default_val="")
    crd = pmag.get_named_arg_from_sys("-crd", default_val="s")
    if crd == "s":
        coord = "-1"
    elif crd == "t":
        coord = "100"
    else:
        coord = "0"
    fmt = pmag.get_named_arg_from_sys("-fmt", "svg")
    specimen = pmag.get_named_arg_from_sys("-spc", default_val="")
    beg_pca, end_pca = "", ""
    if '-dir' in sys.argv:
        ind = sys.argv.index('-dir')
        direction_type = sys.argv[ind + 1]
        beg_pca = int(sys.argv[ind + 2])
        end_pca = int(sys.argv[ind + 3])
        if direction_type == 'L':
            calculation_type = 'DE-BFL'
        if direction_type == 'P':
            calculation_type = 'DE-BFP'
        if direction_type == 'F':
            calculation_type = 'DE-FM'
    if '-A' in sys.argv:
        doave = 0
    if '-sav' in sys.argv:
        plots, verbose = 1, 0
    #
    first_save = 1
    fnames = {
        'measurements': meas_file,
        'specimens': spec_file,
        'samples': samp_file,
        'sites': site_file
    }
    contribution = nb.Contribution(
        dir_path,
        custom_filenames=fnames,
        read_tables=['measurements', 'specimens', 'samples', 'sites'])
    #
    #   import  specimens

    specimen_cols = [
        'analysts', 'aniso_ftest', 'aniso_ftest12', 'aniso_ftest23', 'aniso_s',
        'aniso_s_mean', 'aniso_s_n_measurements', 'aniso_s_sigma',
        'aniso_s_unit', 'aniso_tilt_correction', 'aniso_type', 'aniso_v1',
        'aniso_v2', 'aniso_v3', 'citations', 'description', 'dir_alpha95',
        'dir_comp', 'dir_dec', 'dir_inc', 'dir_mad_free', 'dir_n_measurements',
        'dir_tilt_correction', 'experiments', 'geologic_classes',
        'geologic_types', 'hyst_bc', 'hyst_bcr', 'hyst_mr_moment',
        'hyst_ms_moment', 'int_abs', 'int_b', 'int_b_beta', 'int_b_sigma',
        'int_corr', 'int_dang', 'int_drats', 'int_f', 'int_fvds', 'int_gamma',
        'int_mad_free', 'int_md', 'int_n_measurements', 'int_n_ptrm', 'int_q',
        'int_rsc', 'int_treat_dc_field', 'lithologies', 'meas_step_max',
        'meas_step_min', 'meas_step_unit', 'method_codes', 'sample',
        'software_packages', 'specimen'
    ]
    if 'specimens' in contribution.tables:
        #        contribution.propagate_name_down('sample','measurements')
        spec_container = contribution.tables['specimens']
        prior_spec_data = spec_container.get_records_for_code(
            'LP-DIR', strict_match=False
        )  # look up all prior directional interpretations
#
#  tie sample names to measurement data
#
    else:
        spec_container, prior_spec_data = None, []

#
#   import samples  for orientation info
#
    if 'samples' in contribution.tables:
        #        contribution.propagate_name_down('site','measurements')
        contribution.propagate_cols(
            col_names=['azimuth', 'dip', 'orientation_flag'],
            target_df_name='measurements',
            source_df_name='samples')
#
# define figure numbers for equal area, zijderveld,
#  and intensity vs. demagnetiztion step respectively
#
    ZED = {}
    ZED['eqarea'], ZED['zijd'], ZED['demag'] = 1, 2, 3
    pmagplotlib.plot_init(ZED['eqarea'], 6, 6)
    pmagplotlib.plot_init(ZED['zijd'], 6, 6)
    pmagplotlib.plot_init(ZED['demag'], 6, 6)
    #    save_pca=0
    angle, direction_type, setangle = "", "", 0
    #   create measurement dataframe
    #
    meas_container = contribution.tables['measurements']
    meas_data = meas_container.df
    #
    meas_data = meas_data[meas_data['method_codes'].str.contains(
        'LT-NO|LT-AF-Z|LT-T-Z|LT-M-Z') == True]  # fish out steps for plotting
    meas_data = meas_data[meas_data['method_codes'].str.contains(
        'AN|ARM|LP-TRM|LP-PI-ARM') == False]  # strip out unwanted experiments
    intensity_types = [
        col_name for col_name in meas_data.columns if col_name in intlist
    ]
    # plot first intensity method found - normalized to initial value anyway -
    # doesn't matter which used
    int_key = intensity_types[0]
    # get all the non-null intensity records of the same type
    meas_data = meas_data[meas_data[int_key].notnull()]
    if 'flag' not in meas_data.columns:
        meas_data['flag'] = 'g'  # set the default flag to good
# need to treat LP-NO specially  for af data, treatment should be zero,
# otherwise 273.
    meas_data['treatment'] = meas_data['treat_ac_field'].where(
        cond=meas_data['treat_ac_field'] != '0', other=meas_data['treat_temp'])
    meas_data['ZI'] = 1  # initialize these to one
    meas_data['instrument_codes'] = ""  # initialize these to blank
    #   for unusual case of microwave power....
    if 'treat_mw_power' in meas_data.columns:
        meas_data.loc[
            meas_data.treat_mw_power != 0,
            'treatment'] = meas_data.treat_mw_power * meas_data.treat_mw_time
#
# get list of unique specimen names from measurement data
#
# this is a list of all the specimen names
    specimen_names = meas_data.specimen.unique()
    specimen_names = specimen_names.tolist()
    specimen_names.sort()
    #
    # set up new DataFrame for this sessions specimen interpretations
    #
    data_container = nb.MagicDataFrame(dtype='specimens',
                                       columns=specimen_cols)
    # this is for interpretations from this session
    current_spec_data = data_container.df
    locname = 'LookItUp'
    if specimen == "":
        k = 0
    else:
        k = specimen_names.index(specimen)
    # let's look at the data now
    while k < len(specimen_names):
        # set the current specimen for plotting
        this_specimen = specimen_names[k]
        if verbose and this_specimen != "":
            print(this_specimen, k + 1, 'out of ', len(specimen_names))
        if setangle == 0:
            angle = ""
        this_specimen_measurements = meas_data[
            meas_data['specimen'].str.contains(
                this_specimen) == True]  # fish out this specimen
        this_specimen_measurements = this_specimen_measurements[
            this_specimen_measurements['flag'].str.contains(
                'g') == True]  # fish out this specimen
        if len(this_specimen_measurements) != 0:  # if there are measurements
            #
            #    set up datablock [[treatment,dec, inc, int, direction_type],[....]]
            #
            #
            # figure out the method codes
            #
            units, methods, title = "", "", this_specimen
            # this is a list of all the specimen method codes`
            meas_meths = this_specimen_measurements.method_codes.unique()
            tr = pd.to_numeric(this_specimen_measurements.treatment).tolist()
            if set(tr) == set([0]):
                k += 1
                continue
            for m in meas_meths:
                if 'LT-AF-Z' in m:
                    units = 'T'  # units include tesla
                    tr[0] = 0
                if 'LT-T-Z' in m:
                    units = units + ":K"  # units include kelvin
                if 'LT-M-Z' in m:
                    units = units + ':J'  # units include joules
                    tr[0] = 0
                units = units.strip(':')  # strip off extra colons
                if 'LP-' in m:
                    methods = methods + ":" + m
            decs = pd.to_numeric(this_specimen_measurements.dir_dec).tolist()
            incs = pd.to_numeric(this_specimen_measurements.dir_inc).tolist()
            #
            #    fix the coordinate system
            #
            if coord != '-1':  # need to transform coordinates to geographic

                azimuths = pd.to_numeric(this_specimen_measurements.azimuth
                                         ).tolist()  # get the azimuths
                # get the azimuths
                dips = pd.to_numeric(this_specimen_measurements.dip).tolist()
                dirs = [decs, incs, azimuths, dips]
                # this transposes the columns and rows of the list of lists
                dirs_geo = np.array(list(map(list, list(zip(*dirs)))))
                decs, incs = pmag.dogeo_V(dirs_geo)
                if coord == '100':  # need to do tilt correction too
                    bed_dip_dirs = pd.to_numeric(
                        this_specimen_measurements.bed_dip_dir).tolist(
                        )  # get the azimuths
                    bed_dips = pd.to_numeric(this_specimen_measurements.bed_dip
                                             ).tolist()  # get the azimuths
                    dirs = [decs, incs, bed_dip_dirs, bed_dips]
                    # this transposes the columns and rows of the list of lists
                    dirs_tilt = np.array(list(map(list, list(zip(*dirs)))))
                    decs, incs = pmag.dotilt_V(dirs_tilt)
                    title = title + '_t'
                else:
                    title = title + '_g'
            if angle == "":
                angle = decs[0]
            ints = pd.to_numeric(this_specimen_measurements[int_key]).tolist()
            ZI = this_specimen_measurements.ZI.tolist()
            flags = this_specimen_measurements.flag.tolist()
            codes = this_specimen_measurements.instrument_codes.tolist()
            datalist = [tr, decs, incs, ints, ZI, flags, codes]
            # this transposes the columns and rows of the list of lists
            datablock = list(map(list, list(zip(*datalist))))
            pmagplotlib.plotZED(ZED, datablock, angle, title, units)
            if verbose:
                pmagplotlib.drawFIGS(ZED)
#
#     collect info for current_specimen_interpretation dictionary
#
            if beg_pca == "" and len(prior_spec_data) != 0:
                #
                #     find prior interpretation
                #
                prior_specimen_interpretations = prior_spec_data[
                    prior_spec_data['specimen'].str.contains(
                        this_specimen) == True]
                beg_pcas = pd.to_numeric(prior_specimen_interpretations.
                                         meas_step_min.values).tolist()
                end_pcas = pd.to_numeric(prior_specimen_interpretations.
                                         meas_step_max.values).tolist()
                spec_methods = prior_specimen_interpretations.method_codes.tolist(
                )
                # step through all prior interpretations and plot them
                for ind in range(len(beg_pcas)):
                    spec_meths = spec_methods[ind].split(':')
                    for m in spec_meths:
                        if 'DE-BFL' in m:
                            calculation_type = 'DE-BFL'  # best fit line
                        if 'DE-BFP' in m:
                            calculation_type = 'DE-BFP'  # best fit plane
                        if 'DE-FM' in m:
                            calculation_type = 'DE-FM'  # fisher mean
                        if 'DE-BFL-A' in m:
                            calculation_type = 'DE-BFL-A'  # anchored best fit line
                    start, end = tr.index(beg_pcas[ind]), tr.index(
                        end_pcas[ind]
                    )  # getting the starting and ending points
                    # calculate direction/plane
                    mpars = pmag.domean(datablock, start, end,
                                        calculation_type)
                    if mpars["specimen_direction_type"] != "Error":
                        # put it on the plot
                        pmagplotlib.plotDir(ZED, mpars, datablock, angle)
                        if verbose:
                            pmagplotlib.drawFIGS(ZED)
            else:
                start, end = int(beg_pca), int(end_pca)
                # calculate direction/plane
                mpars = pmag.domean(datablock, start, end, calculation_type)
                if mpars["specimen_direction_type"] != "Error":
                    # put it on the plot
                    pmagplotlib.plotDir(ZED, mpars, datablock, angle)
                    if verbose:
                        pmagplotlib.drawFIGS(ZED)
            if plots == 1 or specimen != "":
                if plot_file == "":
                    basename = title
                else:
                    basename = plot_file
                files = {}
                for key in list(ZED.keys()):
                    files[key] = basename + '_' + key + '.' + fmt
                pmagplotlib.saveP(ZED, files)
                if specimen != "":
                    sys.exit()
            if verbose:
                recnum = 0
                for plotrec in datablock:
                    if units == 'T':
                        print('%s: %i  %7.1f %s  %8.3e %7.1f %7.1f %s' %
                              (plotrec[5], recnum, plotrec[0] * 1e3, " mT",
                               plotrec[3], plotrec[1], plotrec[2], plotrec[6]))
                    if units == "K":
                        print('%s: %i  %7.1f %s  %8.3e %7.1f %7.1f %s' %
                              (plotrec[5], recnum, plotrec[0] - 273, ' C',
                               plotrec[3], plotrec[1], plotrec[2], plotrec[6]))
                    if units == "J":
                        print('%s: %i  %7.1f %s  %8.3e %7.1f %7.1f %s' %
                              (plotrec[5], recnum, plotrec[0], ' J',
                               plotrec[3], plotrec[1], plotrec[2], plotrec[6]))
                    if 'K' in units and 'T' in units:
                        if plotrec[0] >= 1.:
                            print('%s: %i  %7.1f %s  %8.3e %7.1f %7.1f %s' %
                                  (plotrec[5], recnum, plotrec[0] - 273, ' C',
                                   plotrec[3], plotrec[1], plotrec[2],
                                   plotrec[6]))
                        if plotrec[0] < 1.:
                            print('%s: %i  %7.1f %s  %8.3e %7.1f %7.1f %s' %
                                  (plotrec[5], recnum, plotrec[0] * 1e3, " mT",
                                   plotrec[3], plotrec[1], plotrec[2],
                                   plotrec[6]))
                    recnum += 1
            # we have a current interpretation
            elif mpars["specimen_direction_type"] != "Error":
                #
                # create a new specimen record for the interpreation for this
                # specimen
                this_specimen_interpretation = {
                    col: ""
                    for col in specimen_cols
                }
                #               this_specimen_interpretation["analysts"]=user
                this_specimen_interpretation['software_packages'] = version_num
                this_specimen_interpretation['specimen'] = this_specimen
                this_specimen_interpretation["method_codes"] = calculation_type
                this_specimen_interpretation["meas_step_unit"] = units
                this_specimen_interpretation["meas_step_min"] = tr[start]
                this_specimen_interpretation["meas_step_max"] = tr[end]
                this_specimen_interpretation["dir_dec"] = '%7.1f' % (
                    mpars['specimen_dec'])
                this_specimen_interpretation["dir_inc"] = '%7.1f' % (
                    mpars['specimen_inc'])
                this_specimen_interpretation["dir_dang"] = '%7.1f' % (
                    mpars['specimen_dang'])
                this_specimen_interpretation["dir_n_measurements"] = '%i' % (
                    mpars['specimen_n'])
                this_specimen_interpretation["dir_tilt_correction"] = coord
                methods = methods.replace(" ", "")
                if "T" in units:
                    methods = methods + ":LP-DIR-AF"
                if "K" in units:
                    methods = methods + ":LP-DIR-T"
                if "J" in units:
                    methods = methods + ":LP-DIR-M"
                this_specimen_interpretation["method_codes"] = methods.strip(
                    ':')
                this_specimen_interpretation[
                    "experiments"] = this_specimen_measurements.experiment.unique(
                    )[0]
                #
                #   print some stuff
                #
                if calculation_type != 'DE-FM':
                    this_specimen_interpretation["dir_mad_free"] = '%7.1f' % (
                        mpars['specimen_mad'])
                    this_specimen_interpretation["dir_alpha95"] = ''
                    if verbose:
                        if units == 'K':
                            print(
                                '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %s \n'
                                %
                                (this_specimen_interpretation["specimen"],
                                 int(this_specimen_interpretation[
                                     "dir_n_measurements"]),
                                 float(this_specimen_interpretation[
                                     "dir_mad_free"]),
                                 float(
                                     this_specimen_interpretation["dir_dang"]),
                                 float(this_specimen_interpretation[
                                     "meas_step_min"]) - 273,
                                 float(this_specimen_interpretation[
                                     "meas_step_max"]) - 273,
                                 float(
                                     this_specimen_interpretation["dir_dec"]),
                                 float(
                                     this_specimen_interpretation["dir_inc"]),
                                 calculation_type))
                        elif units == 'T':
                            print(
                                '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %s \n'
                                %
                                (this_specimen_interpretation["specimen"],
                                 int(this_specimen_interpretation[
                                     "dir_n_measurements"]),
                                 float(this_specimen_interpretation[
                                     "dir_mad_free"]),
                                 float(
                                     this_specimen_interpretation["dir_dang"]),
                                 float(this_specimen_interpretation[
                                     "meas_step_min"]) * 1e3,
                                 float(this_specimen_interpretation[
                                     "meas_step_max"]) * 1e3,
                                 float(
                                     this_specimen_interpretation["dir_dec"]),
                                 float(
                                     this_specimen_interpretation["dir_inc"]),
                                 calculation_type))
                        elif 'T' in units and 'K' in units:
                            if float(this_specimen_interpretation[
                                    'meas_step_min']) < 1.0:
                                min = float(this_specimen_interpretation[
                                    'meas_step_min']) * 1e3
                            else:
                                min = float(this_specimen_interpretation[
                                    'meas_step_min']) - 273
                            if float(this_specimen_interpretation[
                                    'meas_step_max']) < 1.0:
                                max = float(this_specimen_interpretation[
                                    'meas_step_max']) * 1e3
                            else:
                                max = float(this_specimen_interpretation[
                                    'meas_step_max']) - 273
                            print(
                                '%s %i %7.1f %i %i %7.1f %7.1f %7.1f %s \n' %
                                (this_specimen_interpretation["specimen"],
                                 int(this_specimen_interpretation[
                                     "dir_n_measurements"]),
                                 float(this_specimen_interpretation[
                                     "dir_mad_free"]),
                                 float(
                                     this_specimen_interpretation["dir_dang"]),
                                 min, max,
                                 float(
                                     this_specimen_interpretation["dir_dec"]),
                                 float(
                                     this_specimen_interpretation["dir_inc"]),
                                 calculation_type))
                        else:
                            print(
                                '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %s \n'
                                %
                                (this_specimen_interpretation["specimen"],
                                 int(this_specimen_interpretation[
                                     "dir_n_measurements"]),
                                 float(this_specimen_interpretation[
                                     "dir_mad_free"]),
                                 float(
                                     this_specimen_interpretation["dir_dang"]),
                                 float(this_specimen_interpretation[
                                     "meas_step_min"]),
                                 float(this_specimen_interpretation[
                                     "meas_step_max"]),
                                 float(
                                     this_specimen_interpretation["dir_dec"]),
                                 float(
                                     this_specimen_interpretation["dir_inc"]),
                                 calculation_type))
                else:
                    this_specimen_interpretation["dir_alpha95"] = '%7.1f' % (
                        mpars['specimen_alpha95'])
                    this_specimen_interpretation["dir_mad_free"] = ''
                    if verbose:
                        if 'K' in units:
                            print(
                                '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %s \n'
                                %
                                (this_specimen_interpretation["specimen"],
                                 int(this_specimen_interpretation[
                                     "dir_n_measurments"]),
                                 float(this_specimen_interpretation[
                                     "dir_mad_free"]),
                                 float(
                                     this_specimen_interpretation["dir_dang"]),
                                 float(this_specimen_interpretation[
                                     "meas_step_min"]) - 273,
                                 float(this_specimen_interpretation[
                                     "meas_step_max"]) - 273,
                                 float(
                                     this_specimen_interpretation["dir_dec"]),
                                 float(
                                     this_specimen_interpretation["dir_inc"]),
                                 calculation_type))
                        elif 'T' in units:
                            print(
                                '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %s \n'
                                %
                                (this_specimen_interpretation["specimen"],
                                 int(this_specimen_interpretation[
                                     "dir_n_measurements"]),
                                 float(this_specimen_interpretation[
                                     "dir_alpha95"]),
                                 float(
                                     this_specimen_interpretation["dir_dang"]),
                                 float(this_specimen_interpretation[
                                     "meas_step_min"]) * 1e3,
                                 float(this_specimen_interpretation[
                                     "meas_step_max"]) * 1e3,
                                 float(
                                     this_specimen_interpretation["dir_dec"]),
                                 float(
                                     this_specimen_interpretation["dir_inc"]),
                                 calculation_type))
                        elif 'T' in units and 'K' in units:
                            if float(this_specimen_interpretation[
                                    'meas_step_min']) < 1.0:
                                min = float(this_specimen_interpretation[
                                    'meas_step_min']) * 1e3
                            else:
                                min = float(this_specimen_interpretation[
                                    'meas_step_min']) - 273
                            if float(this_specimen_interpretation[
                                    'meas_step_max']) < 1.0:
                                max = float(this_specimen_interpretation[
                                    'meas_step_max']) * 1e3
                            else:
                                max = float(this_specimen_interpretation[
                                    'meas_step_max']) - 273
                            print('%s %i %7.1f %i %i %7.1f %7.1f %s \n' % (
                                this_specimen_interpretation["specimen"],
                                int(this_specimen_interpretation[
                                    "dir_n_measurements"]),
                                float(
                                    this_specimen_interpretation["dir_alpha95"]
                                ), min, max,
                                float(this_specimen_interpretation["dir_dec"]),
                                float(this_specimen_interpretation["dir_inc"]),
                                calculation_type))
                        else:
                            print(
                                '%s %i %7.1f %7.1f %7.1f %7.1f %7.1f %s \n' %
                                (this_specimen_interpretation["specimen"],
                                 int(this_specimen_interpretation[
                                     "dir_n_measurements"]),
                                 float(this_specimen_interpretation[
                                     "dir_alpha95"]),
                                 float(this_specimen_interpretation[
                                     "meas_step_min"]),
                                 float(this_specimen_interpretation[
                                     "meas_step_max"]),
                                 float(
                                     this_specimen_interpretation["dir_dec"]),
                                 float(
                                     this_specimen_interpretation["dir_inc"]),
                                 calculation_type))
                if verbose:
                    saveit = input("Save this interpretation? [y]/n \n")
#   START HERE
#
#         if len(current_spec_data)==0: # no interpretations yet for this session
#             print "no current interpretation"
#             beg_pca,end_pca="",""
#             calculation_type=""
# get the ones that meet the current coordinate system
        else:
            print("no data")
        if verbose:
            input('Ready for next specimen  ')
        k += 1
Esempio n. 55
0
def main():
    """
    NAME
        lnp_magic.py

    DESCRIPTION
       makes equal area projections site by site
         from pmag_specimen formatted file with
         Fisher confidence ellipse using McFadden and McElhinny (1988)
         technique for combining lines and planes

    SYNTAX
        lnp_magic [command line options]

    INPUT
       takes magic formatted pmag_specimens file
    
    OUPUT
        prints site_name n_lines n_planes K alpha95 dec inc R

    OPTIONS
        -h prints help message and quits
        -f FILE: specify input file, default is 'pmag_specimens.txt'
        -crd [s,g,t]: specify coordinate system, [s]pecimen, [g]eographic, [t]ilt adjusted
                default is specimen
        -fmt [svg,png,jpg] format for plots, default is svg
        -sav save plots and quit
        -P: do not plot
        -F FILE, specify output file of dec, inc, alpha95 data for plotting with plotdi_a and plotdi_e
        -exc use criteria in pmag_criteria.txt
    """
    dir_path='.'
    FIG={} # plot dictionary
    FIG['eqarea']=1 # eqarea is figure 1
    in_file,plot_key,coord='pmag_specimens.txt','er_site_name',"-1"
    out_file=""
    fmt,plt,plot='svg',1,0
    Crits=""
    M,N,acutoff,kcutoff=180.,1,180.,0.
    if '-h' in sys.argv:
        print(main.__doc__)
        sys.exit()
    if '-WD' in sys.argv:
        ind=sys.argv.index('-WD')
        dir_path=sys.argv[ind+1]
    if '-f' in sys.argv:
        ind=sys.argv.index("-f")
        in_file=sys.argv[ind+1]
    if '-exc' in sys.argv:
        Crits,file_type=pmag.magic_read(dir_path+'/pmag_criteria.txt')
        for crit in Crits:
            if 'specimen_mad' in crit:   M=float(crit['specimen_mad'])
            if 'specimen_n' in crit:   N=float(crit['specimen_n'])
            if 'site_alpha95' in crit: acutoff=float(crit['site_alpha95'])
            if 'site_k' in crit: kcutoff=float(crit['site_k'])
    if '-F' in sys.argv:
        ind=sys.argv.index("-F")
        out_file=sys.argv[ind+1]
        out=open(dir_path+'/'+out_file,'w')
    if '-crd' in sys.argv:
        ind=sys.argv.index("-crd")
        crd=sys.argv[ind+1]
        if crd=='s':coord="-1"
        if crd=='g':coord="0"
        if crd=='t':coord="100"
    if '-fmt' in sys.argv:
        ind=sys.argv.index("-fmt")
        fmt=sys.argv[ind+1]
    if '-P' in sys.argv:plt=0
    if '-sav' in sys.argv:plot=1
# 
    in_file=dir_path+'/'+in_file
    Specs,file_type=pmag.magic_read(in_file)
    if file_type!='pmag_specimens':
        print('Error opening file')
        sys.exit()
    sitelist=[]
    for rec in Specs:
        if rec['er_site_name'] not in sitelist: sitelist.append(rec['er_site_name'])
    sitelist.sort()
    if plt==1:
        EQ={} 
        EQ['eqarea']=1
        pmagplotlib.plot_init(EQ['eqarea'],4,4)
    for site in sitelist:
        print(site)
        data=[]
        for spec in Specs:
           if 'specimen_tilt_correction' not in list(spec.keys()):spec['specimen_tilt_correction']='-1' # assume unoriented
           if spec['er_site_name']==site:
              if 'specimen_mad' not in list(spec.keys()) or spec['specimen_mad']=="":
                   if 'specimen_alpha95' in list(spec.keys()) and spec['specimen_alpha95']!="":
                       spec['specimen_mad']=spec['specimen_alpha95']
                   else:
                       spec['specimen_mad']='180'
              if spec['specimen_tilt_correction']==coord and float(spec['specimen_mad'])<=M and float(spec['specimen_n'])>=N: 
                   rec={}
                   for key in list(spec.keys()):rec[key]=spec[key]
                   rec["dec"]=float(spec['specimen_dec'])
                   rec["inc"]=float(spec['specimen_inc'])
                   rec["tilt_correction"]=spec['specimen_tilt_correction']
                   data.append(rec)
        if len(data)>2:
            fpars=pmag.dolnp(data,'specimen_direction_type')
            print("Site lines planes  kappa   a95   dec   inc")
            print(site, fpars["n_lines"], fpars["n_planes"], fpars["K"], fpars["alpha95"], fpars["dec"], fpars["inc"], fpars["R"])
            if out_file!="":
                if float(fpars["alpha95"])<=acutoff and float(fpars["K"])>=kcutoff:
                    out.write('%s %s %s\n'%(fpars["dec"],fpars['inc'],fpars['alpha95']))
            print('% tilt correction: ',coord)
            if plt==1:
                files={}
                files['eqarea']=site+'_'+crd+'_'+'eqarea'+'.'+fmt
                pmagplotlib.plotLNP(EQ['eqarea'],site,data,fpars,'specimen_direction_type')
                if plot==0:
                    pmagplotlib.drawFIGS(EQ)
                    ans=input("s[a]ve plot, [q]uit, <return> to continue:\n ")
                    if ans=="a":
                        pmagplotlib.saveP(EQ,files)
                    if ans=="q": sys.exit()
                else:
                    pmagplotlib.saveP(EQ,files)
        else:
            print('skipping site - not enough data with specified coordinate system')
Esempio n. 56
0
def main():
    """
    NAME
        site_edit_magic.py

    DESCRIPTION
       makes equal area projections site by site
         from pmag_specimens.txt file with
         Fisher confidence ellipse using McFadden and McElhinny (1988)
         technique for combining lines and planes
         allows testing and reject specimens for bad orientations

    SYNTAX
        site_edit_magic.py [command line options]

    OPTIONS
       -h: prints help and quits
       -f: specify pmag_specimen format file, default is pmag_specimens.txt
       -fsa: specify er_samples.txt file
       -exc: use existing pmag_criteria.txt file
       -N: reset all sample flags to good
    
    OUPUT
       edited er_samples.txt file

    """
    dir_path='.'
    FIG={} # plot dictionary
    FIG['eqarea']=1 # eqarea is figure 1
    in_file='pmag_specimens.txt'
    sampfile='er_samples.txt'
    out_file=""
    fmt,plot='svg',1
    Crits=""
    M,N=180.,1
    repeat=''
    renew=0
    if '-h' in sys.argv:
        print main.__doc__
        sys.exit()
    if '-WD' in sys.argv:
        ind=sys.argv.index('-WD')
        dir_path=sys.argv[ind+1]
    if '-f' in sys.argv:
        ind=sys.argv.index("-f")
        in_file=sys.argv[ind+1]
    if '-fsa' in sys.argv:
        ind=sys.argv.index("-fsa")
        sampfile=sys.argv[ind+1]
    if '-exc' in sys.argv:
        Crits,file_type=pmag.magic_read(dir_path+'/pmag_criteria.txt')
        for crit in Crits:
            if crit['pmag_criteria_code']=='DE-SPEC':
                M=float(crit['specimen_mad'])
                N=float(crit['specimen_n'])
    if '-fmt' in sys.argv:
        ind=sys.argv.index("-fmt")
        fmt=sys.argv[ind+1]
    if '-N' in sys.argv: renew=1
# 
    if in_file[0]!="/":in_file=dir_path+'/'+in_file
    if sampfile[0]!="/":sampfile=dir_path+'/'+sampfile
    crd='s'
    Specs,file_type=pmag.magic_read(in_file)
    if file_type!='pmag_specimens':
        print ' bad pmag_specimen input file'
        sys.exit()
    Samps,file_type=pmag.magic_read(sampfile)
    if file_type!='er_samples':
        print ' bad er_samples input file'
        sys.exit()
    SO_methods=[]
    for rec in Samps:
       if 'sample_orientation_flag' not in rec.keys(): rec['sample_orientation_flag']='g'
       if 'sample_description' not in rec.keys(): rec['sample_description']=''
       if renew==1:
          rec['sample_orientation_flag']='g'
          description=rec['sample_description']
          if '#' in description:
               newdesc=""
               c=0
               while description[c]!='#' and c<len(description)-1: # look for first pound sign
                   newdesc=newdesc+description[c]
                   c+=1
               while description[c]=='#': 
                   c+=1# skip first set of pound signs
               while description[c]!='#':c+=1 # find second set of pound signs
               while description[c]=='#' and c<len(description)-1:c+=1 # skip second set of pound signs
               while c<len(description)-1: # look for first pound sign
                   newdesc=newdesc+description[c]
                   c+=1
               rec['sample_description']=newdesc # edit out old comment about orientations
       if "magic_method_codes" in rec:
           methlist=rec["magic_method_codes"]
           for meth in methlist.split(":"):
               if "SO" in meth.strip() and "SO-POM" not in meth.strip():
                   if meth.strip() not in SO_methods: SO_methods.append(meth.strip())
    pmag.magic_write(sampfile,Samps,'er_samples')
    SO_priorities=pmag.set_priorities(SO_methods,0)
    sitelist=[]
    for rec in Specs:
        if rec['er_site_name'] not in sitelist: sitelist.append(rec['er_site_name'])
    sitelist.sort()
    EQ={} 
    EQ['eqarea']=1
    pmagplotlib.plot_init(EQ['eqarea'],5,5)
    k=0
    while k<len(sitelist):
        site=sitelist[k]
        print site
        data=[]
        ThisSiteSpecs=pmag.get_dictitem(Specs,'er_site_name',site,'T')
        ThisSiteSpecs=pmag.get_dictitem(ThisSiteSpecs,'specimen_tilt_correction','-1','T') # get all the unoriented data
        for spec in ThisSiteSpecs:
                if spec['specimen_mad']!="" and spec['specimen_n']!="" and float(spec['specimen_mad'])<=M and float(spec['specimen_n'])>=N: 
# good spec, now get orientation....
                    redo,p=1,0
                    if len(SO_methods)<=1:
                        az_type=SO_methods[0]
                        orient=pmag.find_samp_rec(spec["er_sample_name"],Samps,az_type)
                        redo=0
                    while redo==1:
                        if p>=len(SO_priorities):
                            print "no orientation data for ",spec['er_sample_name']
                            orient["sample_azimuth"]=""
                            orient["sample_dip"]=""
                            redo=0
                        else:
                            az_type=SO_methods[SO_methods.index(SO_priorities[p])]
                            orient=pmag.find_samp_rec(spec["er_sample_name"],Samps,az_type)
                            if orient["sample_azimuth"]  !="":
                                redo=0
                        p+=1
                    if orient['sample_azimuth']!="":
                        rec={}
                        for key in spec.keys():rec[key]=spec[key]
                        rec['dec'],rec['inc']=pmag.dogeo(float(spec['specimen_dec']),float(spec['specimen_inc']),float(orient['sample_azimuth']),float(orient['sample_dip']))
                        rec["tilt_correction"]='1'
                        crd='g'
                        rec['sample_azimuth']=orient['sample_azimuth']
                        rec['sample_dip']=orient['sample_dip']
                        data.append(rec)
        if len(data)>2:
            print 'specimen, dec, inc, n_meas/MAD,| method codes '
            for i  in range(len(data)):
                print '%s: %7.1f %7.1f %s / %s | %s' % (data[i]['er_specimen_name'], data[i]['dec'], data[i]['inc'], data[i]['specimen_n'], data[i]['specimen_mad'], data[i]['magic_method_codes'])

            fpars=pmag.dolnp(data,'specimen_direction_type')
            print "\n Site lines planes  kappa   a95   dec   inc"
            print site, fpars["n_lines"], fpars["n_planes"], fpars["K"], fpars["alpha95"], fpars["dec"], fpars["inc"], fpars["R"]
            if out_file!="":
                if float(fpars["alpha95"])<=acutoff and float(fpars["K"])>=kcutoff:
                    out.write('%s %s %s\n'%(fpars["dec"],fpars['inc'],fpars['alpha95']))
            pmagplotlib.plotLNP(EQ['eqarea'],site,data,fpars,'specimen_direction_type')
            pmagplotlib.drawFIGS(EQ)
            if k!=0 and repeat!='y':
                ans=raw_input("s[a]ve plot, [q]uit, [e]dit specimens, [p]revious site, <return> to continue:\n ")
            elif k==0 and repeat!='y':
                ans=raw_input("s[a]ve plot, [q]uit, [e]dit specimens, <return> to continue:\n ")
            if ans=="p": k-=2
            if ans=="a":
                files={}
                files['eqarea']=site+'_'+crd+'_eqarea'+'.'+fmt
                pmagplotlib.saveP(EQ,files)
            if ans=="q": sys.exit()
            if ans=="e" and Samps==[]:
                print "can't edit samples without orientation file, sorry"
            elif ans=="e": 
#                k-=1
                testspec=raw_input("Enter name of specimen to check: ")
                for spec in data:
                    if spec['er_specimen_name']==testspec:
# first test wrong direction of drill arrows (flip drill direction in opposite direction and re-calculate d,i
                        d,i=pmag.dogeo(float(spec['specimen_dec']),float(spec['specimen_inc']),float(spec['sample_azimuth'])-180.,-float(spec['sample_dip']))
                        XY=pmag.dimap(d,i)
                        pmagplotlib.plotXY(EQ['eqarea'],[XY[0]],[XY[1]],sym='g^')
# first test wrong end of compass (take az-180.)
                        d,i=pmag.dogeo(float(spec['specimen_dec']),float(spec['specimen_inc']),float(spec['sample_azimuth'])-180.,float(spec['sample_dip']))
                        XY=pmag.dimap(d,i)
                        pmagplotlib.plotXY(EQ['eqarea'],[XY[0]],[XY[1]],sym='kv')
# did the sample spin in the hole?  
# now spin around specimen's z
                        X_up,Y_up,X_d,Y_d=[],[],[],[]
                        for incr in range(0,360,5):
                            d,i=pmag.dogeo(float(spec['specimen_dec'])+incr,float(spec['specimen_inc']),float(spec['sample_azimuth']),float(spec['sample_dip']))
                            XY=pmag.dimap(d,i)
                            if i>=0:
                                X_d.append(XY[0])
                                Y_d.append(XY[1])
                            else:
                                X_up.append(XY[0])
                                Y_up.append(XY[1])
                        pmagplotlib.plotXY(EQ['eqarea'],X_d,Y_d,sym='b.')
                        pmagplotlib.plotXY(EQ['eqarea'],X_up,Y_up,sym='c.')
                        pmagplotlib.drawFIGS(EQ)
                        break
                print "Triangle: wrong arrow for drill direction."
                print "Delta: wrong end of compass."
                print "Small circle:  wrong mark on sample. [cyan upper hemisphere]"
                deleteme=raw_input("Mark this sample as bad? y/[n]  ")
                if deleteme=='y':
                    reason=raw_input("Reason: [1] broke, [2] wrong drill direction, [3] wrong compass direction, [4] bad mark, [5] displaced block [6] other ")
                    if reason=='1':
                       description=' sample broke while drilling'
                    if reason=='2':
                       description=' wrong drill direction '
                    if reason=='3':
                       description=' wrong compass direction '
                    if reason=='4':
                       description=' bad mark in field'
                    if reason=='5':
                       description=' displaced block'
                    if reason=='6':
                       description=raw_input('Enter brief reason for deletion:   ')
                    for samp in Samps:
                        if samp['er_sample_name']==spec['er_sample_name']:
                            samp['sample_orientation_flag']='b'
                            samp['sample_description']=samp['sample_description']+' ## direction deleted because: '+description+'##' # mark description
                    pmag.magic_write(sampfile,Samps,'er_samples')
                repeat=raw_input("Mark another sample, this site? y/[n]  ")
                if repeat=='y': k-=1
        else:
            print 'skipping site - not enough data with specified coordinate system'
        k+=1 
    print "sample flags stored in ",sampfile
Esempio n. 57
0
def main():
    """
    NAME
        dayplot_magic.py

    DESCRIPTION
        makes 'day plots' (Day et al. 1977) and squareness/coercivity,
        plots 'linear mixing' curve from Dunlop and Carter-Stiglitz (2006).
          squareness coercivity of remanence (Neel, 1955) plots after
          Tauxe et al. (2002)

    SYNTAX
        dayplot_magic.py [command line options]

    OPTIONS
        -h prints help message and quits
        -f: specify input hysteresis file, default is rmag_hysteresis.txt
        -fr: specify input remanence file, default is rmag_remanence.txt
        -fmt [svg,png,jpg] format for output plots
        -sav saves plots and quits quietly
        -n label specimen names
    """
    args = sys.argv
    hyst_file, rem_file = "rmag_hysteresis.txt", "rmag_remanence.txt"
    dir_path = '.'
    verbose = pmagplotlib.verbose
    fmt = 'svg'  # default file format
    if '-WD' in args:
        ind = args.index('-WD')
        dir_path = args[ind + 1]
    if "-h" in args:
        print(main.__doc__)
        sys.exit()
    if '-f' in args:
        ind = args.index("-f")
        hyst_file = args[ind + 1]
    if '-fr' in args:
        ind = args.index("-fr")
        rem_file = args[ind + 1]
    if '-fmt' in sys.argv:
        ind = sys.argv.index("-fmt")
        fmt = sys.argv[ind + 1]
    if '-sav' in sys.argv:
        plots = 1
        verbose = 0
    else:
        plots = 0
    if '-n' in sys.argv:
        label = 1
    else:
        label = 0
    hyst_file = os.path.realpath(os.path.join(dir_path, hyst_file))
    rem_file = os.path.realpath(os.path.join(dir_path, rem_file))
    #
    # initialize some variables
    # define figure numbers for Day,S-Bc,S-Bcr
    DSC = {}
    DSC['day'], DSC['S-Bc'], DSC['S-Bcr'], DSC['bcr1-bcr2'] = 1, 2, 3, 4
    pmagplotlib.plot_init(DSC['day'], 5, 5)
    pmagplotlib.plot_init(DSC['S-Bc'], 5, 5)
    pmagplotlib.plot_init(DSC['S-Bcr'], 5, 5)
    pmagplotlib.plot_init(DSC['bcr1-bcr2'], 5, 5)
    #
    #
    hyst_data, file_type = pmag.magic_read(hyst_file)
    rem_data, file_type = pmag.magic_read(rem_file)
    #
    S, BcrBc, Bcr2, Bc, hsids, Bcr = [], [], [], [], [], []
    Ms, Bcr1, Bcr1Bc, S1 = [], [], [], []
    names = []
    locations = ''
    for rec in hyst_data:
        if 'er_location_name' in rec.keys(
        ) and rec['er_location_name'] not in locations:
            locations = locations + rec['er_location_name'] + '_'
        if rec['hysteresis_bcr'] != "" and rec['hysteresis_mr_moment'] != "":
            S.append(
                float(rec['hysteresis_mr_moment']) /
                float(rec['hysteresis_ms_moment']))
            Bcr.append(float(rec['hysteresis_bcr']))
            Bc.append(float(rec['hysteresis_bc']))
            BcrBc.append(Bcr[-1] / Bc[-1])
            if 'er_synthetic_name' in rec.keys(
            ) and rec['er_synthetic_name'] != "":
                rec['er_specimen_name'] = rec['er_synthetic_name']
            hsids.append(rec['er_specimen_name'])
            names.append(rec['er_specimen_name'])
    if len(rem_data) > 0:
        for rec in rem_data:
            if rec['remanence_bcr'] != "" and float(rec['remanence_bcr']) > 0:
                try:
                    ind = hsids.index(rec['er_specimen_name'])
                    Bcr1.append(float(rec['remanence_bcr']))
                    Bcr1Bc.append(Bcr1[-1] / Bc[ind])
                    S1.append(S[ind])
                    Bcr2.append(Bcr[ind])
                except ValueError:
                    if verbose:
                        print('hysteresis data for ', rec['er_specimen_name'],
                              ' not found')
    #
    # now plot the day and S-Bc, S-Bcr plots
    #
    leglist = []
    if label == 0: names = []
    if len(Bcr1) > 0:
        pmagplotlib.plotDay(DSC['day'], Bcr1Bc, S1, 'ro', names=names)
        pmagplotlib.plotSBcr(DSC['S-Bcr'], Bcr1, S1, 'ro')
        pmagplotlib.plot_init(DSC['bcr1-bcr2'], 5, 5)
        pmagplotlib.plotBcr(DSC['bcr1-bcr2'], Bcr1, Bcr2)
    else:
        del DSC['bcr1-bcr2']
    pmagplotlib.plotDay(DSC['day'], BcrBc, S, 'bs', names=names)
    pmagplotlib.plotSBcr(DSC['S-Bcr'], Bcr, S, 'bs')
    pmagplotlib.plotSBc(DSC['S-Bc'], Bc, S, 'bs')
    files = {}
    if len(locations) > 0: locations = locations[:-1]
    for key in DSC.keys():
        if pmagplotlib.isServer:  # use server plot naming convention
            files[
                key] = 'LO:_' + locations + '_' + 'SI:__SA:__SP:__TY:_' + key + '_.' + fmt
        else:  # use more readable plot naming convention
            files[key] = '{}_{}.{}'.format(locations, key, fmt)
    if verbose:
        pmagplotlib.drawFIGS(DSC)
        ans = raw_input(" S[a]ve to save plots, return to quit:  ")
        if ans == "a":
            pmagplotlib.saveP(DSC, files)
        else:
            sys.exit()
    if plots: pmagplotlib.saveP(DSC, files)