def combFile(filename=''):
"""Comb a gcode linear move file. Depending on the preferences, either arcPoint, arcRadius, arcSegment, bevel or do nothing.
If no filename is specified, comb the first unmodified gcode file in this folder."""
if filename == '':
unmodified = gcodec.getUnmodifiedGCodeFiles()
if len(unmodified) == 0:
print >> sys.stderr, (
"There are no unmodified gcode files in this folder.")
return
filename = unmodified[0]
combPreferences = CombPreferences()
preferences.readPreferences(combPreferences)
if not combPreferences.comb.value:
print >> sys.stderr, (
'The preference is to not comb, so nothing will be done.')
return
print >> sys.stderr, ('File ' + gcodec.getSummarizedFilename(filename) +
' is being combed.')
gcodeText = gcodec.getFileText(filename)
if gcodeText == '':
return
suffixFilename = filename[:filename.rfind('.')] + '_comb.gcode'
gcodec.writeFileText(suffixFilename,
getCombGcode(gcodeText, combPreferences))
print >> sys.stderr, ('The combed file is saved as ' + suffixFilename)
vectorwrite.writeSkeinforgeVectorFile(suffixFilename)
def towerChainFile(filename=''):
"""Tower a gcode linear move file. Chain tower the gcode if it is not already towered.
Depending on the preferences, either arcPoint, arcRadius, arcSegment, bevel or do nothing.
If no filename is specified, tower the first unmodified gcode file in this folder."""
if filename == '':
unmodified = gcodec.getGNUGcode()
if len(unmodified) == 0:
print >> sys.stderr, (
"There are no unmodified gcode files in this folder.")
return
filename = unmodified[0]
towerPreferences = TowerPreferences()
preferences.readPreferences(towerPreferences)
startTime = time.time()
print >> sys.stderr, ('File ' + gcodec.getSummarizedFilename(filename) +
' is being chain towered.')
gcodeText = gcodec.getFileText(filename)
if gcodeText == '':
return
suffixFilename = filename[:filename.rfind('.')] + '_tower.gcode'
gcodec.writeFileText(suffixFilename,
getTowerChainGcode(gcodeText, towerPreferences))
print >> sys.stderr, ('The towered file is saved as ' +
gcodec.getSummarizedFilename(suffixFilename))
vectorwrite.writeSkeinforgeVectorFile(suffixFilename)
print >> sys.stderr, ('It took ' +
str(int(round(time.time() - startTime))) +
' seconds to tower the file.')
def towerFile(filename=''):
"""Tower a gcode linear move file. Depending on the preferences, either arcPoint, arcRadius, arcSegment, bevel or do nothing.
If no filename is specified, tower the first unmodified gcode file in this folder."""
if filename == '':
unmodified = gcodec.getUnmodifiedGCodeFiles()
if len(unmodified) == 0:
print >> sys.stderr, (
"There are no unmodified gcode files in this folder.")
return
filename = unmodified[0]
towerPreferences = TowerPreferences()
preferences.readPreferences(towerPreferences)
if towerPreferences.maximumTowerHeight.value < 1:
print >> sys.stderr, (
'The maximum tower height preference is less than one, so nothing will be done.'
)
return
print >> sys.stderr, ('File ' + gcodec.getSummarizedFilename(filename) +
' is being towered.')
gcodeText = gcodec.getFileText(filename)
if gcodeText == '':
return
suffixFilename = filename[:filename.rfind('.')] + '_tower.gcode'
gcodec.writeFileText(suffixFilename,
getTowerGcode(gcodeText, towerPreferences))
print >> sys.stderr, ('The towered file is saved as ' + suffixFilename)
vectorwrite.writeSkeinforgeVectorFile(suffixFilename)
def fillFile(filename=''):
"Fill the slices of a gcode file. If no filename is specified, fill the first unmodified gcode file in this folder."
if filename == '':
unmodified = gcodec.getUnmodifiedGCodeFiles()
if len(unmodified) == 0:
print >> sys.stderr, (
"There are no unmodified gcode files in this folder.")
return
filename = unmodified[0]
startTime = time.time()
fillPreferences = FillPreferences()
preferences.readPreferences(fillPreferences)
print >> sys.stderr, ('File ' + gcodec.getSummarizedFilename(filename) +
' is being filled.')
gcodeText = gcodec.getFileText(filename)
if gcodeText == '':
return
suffixFilename = filename[:filename.rfind('.')] + '_fill.gcode'
gcodec.writeFileText(suffixFilename,
getFillGcode(gcodeText, fillPreferences))
print >> sys.stderr, ('The filled file is saved as ' +
gcodec.getSummarizedFilename(suffixFilename))
vectorwrite.writeSkeinforgeVectorFile(suffixFilename)
print >> sys.stderr, ('It took ' +
str(int(round(time.time() - startTime))) +
' seconds to fill the file.')
def getVectorGcode( gcodeText, vectorwritePreferences = None ): "Write a gcode text." if gcodeText == '': return '' if vectorwritePreferences == None: vectorwritePreferences = VectorwritePreferences() preferences.readPreferences( vectorwritePreferences ) skein = VectorwriteSkein() skein.parseGcode( gcodeText, vectorwritePreferences ) return skein.vectorWindow.getVectorFormattedText()
def getSliceGcode( gnuTriangulatedSurfaceText, slicePreferences = None ): "Slice a GNU Triangulated Surface text." if gnuTriangulatedSurfaceText == '': return '' if slicePreferences == None: slicePreferences = SlicePreferences() preferences.readPreferences( slicePreferences ) skein = SliceSkein() skein.parseGcode( slicePreferences, gnuTriangulatedSurfaceText ) return skein.output.getvalue()
def getFillGcode(gcodeText, fillPreferences=None):
"Fill the slices of a gcode text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'fill'):
return gcodeText
if fillPreferences == None:
fillPreferences = FillPreferences()
preferences.readPreferences(fillPreferences)
skein = FillSkein()
skein.parseGcode(fillPreferences, gcodeText)
return skein.output.getvalue()
def getFillGcode( gcodeText, fillPreferences = None ): "Fill the slices of a gcode text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'fill' ): return gcodeText if fillPreferences == None: fillPreferences = FillPreferences() preferences.readPreferences( fillPreferences ) skein = FillSkein() skein.parseGcode( fillPreferences, gcodeText ) return skein.output.getvalue()
def getTowerGcode( gcodeText, towerPreferences = None ): "Tower a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'tower' ): return gcodeText if towerPreferences == None: towerPreferences = TowerPreferences() preferences.readPreferences( towerPreferences ) if towerPreferences.maximumTowerHeight.value < 1: return gcodeText skein = TowerSkein() skein.parseGcode( gcodeText, towerPreferences ) return skein.output.getvalue()
def getStretchGcode(gcodeText, stretchPreferences=None):
"Stretch a gcode linear move text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'stretch'):
return gcodeText
if stretchPreferences == None:
stretchPreferences = StretchPreferences()
preferences.readPreferences(stretchPreferences)
if stretchPreferences.stretchOverHalfExtrusionWidth.value <= 0.0:
return gcodeText
skein = StretchSkein()
skein.parseGcode(gcodeText, stretchPreferences)
return skein.output.getvalue()
def getCombGcode( gcodeText, combPreferences = None ): "Comb a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'comb' ): return gcodeText if combPreferences == None: combPreferences = CombPreferences() preferences.readPreferences( combPreferences ) if not combPreferences.comb.value: return gcodeText skein = CombSkein() skein.parseGcode( gcodeText ) return skein.output.getvalue()
def getTowerGcode(gcodeText, towerPreferences=None):
"Tower a gcode linear move text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'tower'):
return gcodeText
if towerPreferences == None:
towerPreferences = TowerPreferences()
preferences.readPreferences(towerPreferences)
if towerPreferences.maximumTowerHeight.value < 1:
return gcodeText
skein = TowerSkein()
skein.parseGcode(gcodeText, towerPreferences)
return skein.output.getvalue()
def getStretchGcode( gcodeText, stretchPreferences = None ): "Stretch a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'stretch' ): return gcodeText if stretchPreferences == None: stretchPreferences = StretchPreferences() preferences.readPreferences( stretchPreferences ) if stretchPreferences.stretchOverHalfExtrusionWidth.value <= 0.0: return gcodeText skein = StretchSkein() skein.parseGcode( gcodeText, stretchPreferences ) return skein.output.getvalue()
def getCombGcode(gcodeText, combPreferences=None):
"Comb a gcode linear move text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'comb'):
return gcodeText
if combPreferences == None:
combPreferences = CombPreferences()
preferences.readPreferences(combPreferences)
if not combPreferences.comb.value:
return gcodeText
skein = CombSkein()
skein.parseGcode(gcodeText)
return skein.output.getvalue()
def bevelFile( filename = '' ): "Bevel a gcode linear move file. If no filename is specified, bevel the first unmodified gcode file in this folder." if filename == '': unmodified = gcodec.getUnmodifiedGCodeFiles() if len( unmodified ) == 0: print >> sys.stderr, ( "There are no unmodified gcode files in this folder." ) return filename = unmodified[ 0 ] filletPreferences = FilletPreferences() preferences.readPreferences( filletPreferences ) print >> sys.stderr, ( 'File ' + gcodec.getSummarizedFilename( filename ) + ' is being beveled.' ) gcodeText = gcodec.getFileText( filename ) if gcodeText == '': return gcodec.writeFileMessageSuffix( filename, getBevelGcode( filletPreferences, gcodeText ), 'The beveled file is saved as ', '_fillet' )
def arcRadiusFile( filename = '' ): "Fillet a gcode linear move file into a helical radius move file. If no filename is specified, arc radius the first unmodified gcode file in this folder." if filename == '': unmodified = gcodec.getUnmodifiedGCodeFiles() if len( unmodified ) == 0: print >> sys.stderr, ( "There are no unmodified gcode files in this folder." ) return filename = unmodified[ 0 ] filletPreferences = FilletPreferences() preferences.readPreferences( filletPreferences ) print >> sys.stderr, ( 'File ' + gcodec.getSummarizedFilename( filename ) + ' is being filleted into arc radiuses.' ) gcodeText = gcodec.getFileText( filename ) if gcodeText == '': return gcodec.writeFileMessageSuffix( filename, getArcRadiusGcode( filletPreferences, gcodeText ), 'The arc radius file is saved as ', '_fillet' )
def writeVectorFile( filename = '' ): "Write scalable vector graphics for a gcode file. If no filename is specified, write scalable vector graphics for the first gcode file in this folder." if filename == '': unmodified = gcodec.getFilesWithFileTypeWithoutWords( 'gcode' ) if len( unmodified ) == 0: print >> sys.stderr, ( "There is no gcode file in this folder." ) return filename = unmodified[ 0 ] vectorwritePreferences = VectorwritePreferences() preferences.readPreferences( vectorwritePreferences ) print >> sys.stderr, ( 'Scalable vector graphics are being generated for the file ' + gcodec.getSummarizedFilename( filename ) ) fileText = gcodec.getFileText( filename ) suffixFilename = filename[ : filename.rfind( '.' ) ] + '.svg' suffixFilename = suffixFilename.replace( ' ', '_' ) gcodec.writeFileText( suffixFilename, getVectorGcode( fileText, vectorwritePreferences ) ) print >> sys.stderr, ( 'The scalable vector graphics file is saved as ' + gcodec.getSummarizedFilename( suffixFilename ) )
def getFilletGcode( gcodeText, filletPreferences = None ): "Fillet a gcode linear move text." if gcodeText == '': return '' if gcodec.isProcedureDone( gcodeText, 'fillet' ): return gcodeText if filletPreferences == None: filletPreferences = FilletPreferences() preferences.readPreferences( filletPreferences ) if filletPreferences.arcPoint.value: return getArcPointGcode( filletPreferences, gcodeText ) elif filletPreferences.arcRadius.value: return getArcRadiusGcode( filletPreferences, gcodeText ) elif filletPreferences.arcSegment.value: return getArcSegmentGcode( filletPreferences, gcodeText ) elif filletPreferences.bevel.value: return getBevelGcode( filletPreferences, gcodeText ) return gcodeText
def getFilletGcode(gcodeText, filletPreferences=None):
"Fillet a gcode linear move text."
if gcodeText == '':
return ''
if gcodec.isProcedureDone(gcodeText, 'fillet'):
return gcodeText
if filletPreferences == None:
filletPreferences = FilletPreferences()
preferences.readPreferences(filletPreferences)
if filletPreferences.arcPoint.value:
return getArcPointGcode(filletPreferences, gcodeText)
elif filletPreferences.arcRadius.value:
return getArcRadiusGcode(filletPreferences, gcodeText)
elif filletPreferences.arcSegment.value:
return getArcSegmentGcode(filletPreferences, gcodeText)
elif filletPreferences.bevel.value:
return getBevelGcode(filletPreferences, gcodeText)
return gcodeText
def stretchFile( filename = '' ): """Stretch a gcode linear move file. Depending on the preferences, either arcPoint, arcRadius, arcSegment, bevel or do nothing. If no filename is specified, stretch the first unmodified gcode file in this folder.""" if filename == '': unmodified = gcodec.getUnmodifiedGCodeFiles() if len( unmodified ) == 0: print >> sys.stderr, ( "There are no unmodified gcode files in this folder." ) return filename = unmodified[ 0 ] stretchPreferences = StretchPreferences() preferences.readPreferences( stretchPreferences ) print >> sys.stderr, ( 'File ' + gcodec.getSummarizedFilename( filename ) + ' is being stretched.' ) gcodeText = gcodec.getFileText( filename ) if gcodeText == '': return suffixFilename = filename[ : filename.rfind( '.' ) ] + '_stretch.gcode' gcodec.writeFileText( suffixFilename, getStretchGcode( gcodeText, stretchPreferences ) ) print >> sys.stderr, ( 'The stretched file is saved as ' + suffixFilename ) vectorwrite.writeSkeinforgeVectorFile( suffixFilename )
def bevelFile(filename=''):
"Bevel a gcode linear move file. If no filename is specified, bevel the first unmodified gcode file in this folder."
if filename == '':
unmodified = gcodec.getUnmodifiedGCodeFiles()
if len(unmodified) == 0:
print >> sys.stderr, (
"There are no unmodified gcode files in this folder.")
return
filename = unmodified[0]
filletPreferences = FilletPreferences()
preferences.readPreferences(filletPreferences)
print >> sys.stderr, ('File ' + gcodec.getSummarizedFilename(filename) +
' is being beveled.')
gcodeText = gcodec.getFileText(filename)
if gcodeText == '':
return
gcodec.writeFileMessageSuffix(filename,
getBevelGcode(filletPreferences, gcodeText),
'The beveled file is saved as ', '_fillet')
def arcRadiusFile(filename=''):
"Fillet a gcode linear move file into a helical radius move file. If no filename is specified, arc radius the first unmodified gcode file in this folder."
if filename == '':
unmodified = gcodec.getUnmodifiedGCodeFiles()
if len(unmodified) == 0:
print >> sys.stderr, (
"There are no unmodified gcode files in this folder.")
return
filename = unmodified[0]
filletPreferences = FilletPreferences()
preferences.readPreferences(filletPreferences)
print >> sys.stderr, ('File ' + gcodec.getSummarizedFilename(filename) +
' is being filleted into arc radiuses.')
gcodeText = gcodec.getFileText(filename)
if gcodeText == '':
return
gcodec.writeFileMessageSuffix(
filename, getArcRadiusGcode(filletPreferences, gcodeText),
'The arc radius file is saved as ', '_fillet')
def sliceFile( filename = '' ): "Slice a GNU Triangulated Surface file. If no filename is specified, slice the first GNU Triangulated Surface file in this folder." if filename == '': unmodified = gcodec.getGNUTriangulatedSurfaceFiles() if len( unmodified ) == 0: print >> sys.stderr, ( "There are no GNU Triangulated Surface files in this folder." ) return filename = unmodified[ 0 ] startTime = time.time() slicePreferences = SlicePreferences() preferences.readPreferences( slicePreferences ) print >> sys.stderr, ( 'File ' + gcodec.getSummarizedFilename( filename ) + ' is being sliced.' ) gnuTriangulatedSurfaceText = gcodec.getFileText( filename ) if gnuTriangulatedSurfaceText == '': return suffixFilename = filename[ : filename.rfind( '.' ) ] + '_slice.gcode' gcodec.writeFileText( suffixFilename, getSliceGcode( gnuTriangulatedSurfaceText, slicePreferences ) ) print >> sys.stderr, ( 'The sliced file is saved as ' + gcodec.getSummarizedFilename( suffixFilename ) ) vectorwrite.writeSkeinforgeVectorFile( suffixFilename ) print >> sys.stderr, ( 'It took ' + str( int( round( time.time() - startTime ) ) ) + ' seconds to slice the file.' )
def fillFile( filename = '' ): "Fill the slices of a gcode file. If no filename is specified, fill the first unmodified gcode file in this folder." if filename == '': unmodified = gcodec.getUnmodifiedGCodeFiles() if len( unmodified ) == 0: print >> sys.stderr, ( "There are no unmodified gcode files in this folder." ) return filename = unmodified[ 0 ] startTime = time.time() fillPreferences = FillPreferences() preferences.readPreferences( fillPreferences ) print >> sys.stderr, ( 'File ' + gcodec.getSummarizedFilename( filename ) + ' is being filled.' ) gcodeText = gcodec.getFileText( filename ) if gcodeText == '': return suffixFilename = filename[ : filename.rfind( '.' ) ] + '_fill.gcode' gcodec.writeFileText( suffixFilename, getFillGcode( gcodeText, fillPreferences ) ) print >> sys.stderr, ( 'The filled file is saved as ' + gcodec.getSummarizedFilename( suffixFilename ) ) vectorwrite.writeSkeinforgeVectorFile( suffixFilename ) print >> sys.stderr, ( 'It took ' + str( int( round( time.time() - startTime ) ) ) + ' seconds to fill the file.' )
def stretchFile(filename=''):
"""Stretch a gcode linear move file. Depending on the preferences, either arcPoint, arcRadius, arcSegment, bevel or do nothing.
If no filename is specified, stretch the first unmodified gcode file in this folder."""
if filename == '':
unmodified = gcodec.getUnmodifiedGCodeFiles()
if len(unmodified) == 0:
print >> sys.stderr, (
"There are no unmodified gcode files in this folder.")
return
filename = unmodified[0]
stretchPreferences = StretchPreferences()
preferences.readPreferences(stretchPreferences)
print >> sys.stderr, ('File ' + gcodec.getSummarizedFilename(filename) +
' is being stretched.')
gcodeText = gcodec.getFileText(filename)
if gcodeText == '':
return
suffixFilename = filename[:filename.rfind('.')] + '_stretch.gcode'
gcodec.writeFileText(suffixFilename,
getStretchGcode(gcodeText, stretchPreferences))
print >> sys.stderr, ('The stretched file is saved as ' + suffixFilename)
vectorwrite.writeSkeinforgeVectorFile(suffixFilename)
def combFile( filename = '' ): """Comb a gcode linear move file. Depending on the preferences, either arcPoint, arcRadius, arcSegment, bevel or do nothing. If no filename is specified, comb the first unmodified gcode file in this folder.""" if filename == '': unmodified = gcodec.getUnmodifiedGCodeFiles() if len( unmodified ) == 0: print >> sys.stderr, ( "There are no unmodified gcode files in this folder." ) return filename = unmodified[ 0 ] combPreferences = CombPreferences() preferences.readPreferences( combPreferences ) if not combPreferences.comb.value: print >> sys.stderr, ( 'The preference is to not comb, so nothing will be done.' ) return print >> sys.stderr, ( 'File ' + gcodec.getSummarizedFilename( filename ) + ' is being combed.' ) gcodeText = gcodec.getFileText( filename ) if gcodeText == '': return suffixFilename = filename[ : filename.rfind( '.' ) ] + '_comb.gcode' gcodec.writeFileText( suffixFilename, getCombGcode( gcodeText, combPreferences ) ) print >> sys.stderr, ( 'The combed file is saved as ' + suffixFilename ) vectorwrite.writeSkeinforgeVectorFile( suffixFilename )
def combChainFile( filename = '' ): """Comb a gcode linear move file. Chain comb the gcode if it is not already combed. Depending on the preferences, either arcPoint, arcRadius, arcSegment, bevel or do nothing. If no filename is specified, comb the first unmodified gcode file in this folder.""" if filename == '': unmodified = gcodec.getGNUGcode() if len( unmodified ) == 0: print >> sys.stderr, ( "There are no unmodified gcode files in this folder." ) return filename = unmodified[ 0 ] combPreferences = CombPreferences() preferences.readPreferences( combPreferences ) startTime = time.time() print >> sys.stderr, ( 'File ' + gcodec.getSummarizedFilename( filename ) + ' is being chain combed.' ) gcodeText = gcodec.getFileText( filename ) if gcodeText == '': return suffixFilename = filename[ : filename.rfind( '.' ) ] + '_comb.gcode' gcodec.writeFileText( suffixFilename, getCombChainGcode( gcodeText, combPreferences ) ) print >> sys.stderr, ( 'The combed file is saved as ' + gcodec.getSummarizedFilename( suffixFilename ) ) vectorwrite.writeSkeinforgeVectorFile( suffixFilename ) print >> sys.stderr, ( 'It took ' + str( int( round( time.time() - startTime ) ) ) + ' seconds to comb the file.' )
def towerFile( filename = '' ): """Tower a gcode linear move file. Depending on the preferences, either arcPoint, arcRadius, arcSegment, bevel or do nothing. If no filename is specified, tower the first unmodified gcode file in this folder.""" if filename == '': unmodified = gcodec.getUnmodifiedGCodeFiles() if len( unmodified ) == 0: print >> sys.stderr, ( "There are no unmodified gcode files in this folder." ) return filename = unmodified[ 0 ] towerPreferences = TowerPreferences() preferences.readPreferences( towerPreferences ) if towerPreferences.maximumTowerHeight.value < 1: print >> sys.stderr, ( 'The maximum tower height preference is less than one, so nothing will be done.' ) return print >> sys.stderr, ( 'File ' + gcodec.getSummarizedFilename( filename ) + ' is being towered.' ) gcodeText = gcodec.getFileText( filename ) if gcodeText == '': return suffixFilename = filename[ : filename.rfind( '.' ) ] + '_tower.gcode' gcodec.writeFileText( suffixFilename, getTowerGcode( gcodeText, towerPreferences ) ) print >> sys.stderr, ( 'The towered file is saved as ' + suffixFilename ) vectorwrite.writeSkeinforgeVectorFile( suffixFilename )
def writeSkeinforgeVectorFile( filename ): "Write scalable vector graphics for a skeinforge gcode file, if 'Write Scalable Vector Graphics for Skeinforge Chain' is selected." vectorwritePreferences = VectorwritePreferences() preferences.readPreferences( vectorwritePreferences ) if vectorwritePreferences.writeSkeinforgeSVG.value: writeVectorFile( filename )
