def __init__(self):
self._logger = None
# Load configuration information from the config file, which will
# be over-ridden if settings are set on the command line
config, preferences = PreferencesEditor.map_configuration()
# Parse command line arguments
parser = argparse.ArgumentParser(prog="shootoff.py")
parser.add_argument("-d", "--debug", action="store_true",
help="turn on debug log messages")
parser.add_argument("-r", "--detection-rate", type=self._check_rate,
help="sets the rate at which shots are detected in milliseconds. " +
"this should be set to about the length of time your laser trainer " +
"stays on for each shot, typically about 100 ms")
parser.add_argument("-i", "--laser-intensity", type=self._check_intensity,
help="sets the intensity threshold for detecting the laser [0,255]. " +
"this should be as high as you can set it while still detecting " +
"shots")
parser.add_argument("-m", "--marker-radius", type=self._check_radius,
help="sets the radius of shot markers in pixels [1,20]")
parser.add_argument("-c", "--ignore-laser-color",
type=self._check_ignore_laser_color,
help="sets the color of laser that should be ignored by ShootOFF (green " +
"or red). No color is ignored by default")
parser.add_argument("-u", "--use-virtual-magazine",
type=self._check_virtual_magazine,
help="turns on the virtual magazine and sets the number rounds it holds")
parser.add_argument("-f", "--use-malfunctions",
type=self._check_malfunctions,
help="turns on malfunctions and sets the probability of them happening")
args = parser.parse_args()
preferences[DEBUG] = args.debug
if args.detection_rate:
preferences[DETECTION_RATE] = int(args.detection_rate)
if args.laser_intensity:
preferences[LASER_INTENSITY] = int(args.laser_intensity)
if args.marker_radius:
preferences[MARKER_RADIUS] = int(args.marker_radius)
if args.ignore_laser_color:
preferences[IGNORE_LASER_COLOR] = args.ignore_laser_color
if args.use_virtual_magazine:
preferences[USE_VIRTUAL_MAGAZINE] = True
preferences[VIRTUAL_MAGAZINE] = int(args.use_virtual_magazine)
if args.use_malfunctions:
preferences[USE_MALFUNCTIONS] = True
preferences[MALFUNCTION_PROBABILITY] = float(args.use_malfunctions)
self._preferences = preferences
self._config_parser = config
def __init__(self):
self._logger = None
# Load configuration information from the config file, which will
# be over-ridden if settings are set on the command line
config, preferences = PreferencesEditor.map_configuration()
# Parse command line arguments
parser = argparse.ArgumentParser(prog="shootoff.py")
parser.add_argument("-d", "--debug", action="store_true",
help="turn on debug log messages")
parser.add_argument("-r", "--detection-rate", type=self._check_rate,
help="sets the rate at which shots are detected in milliseconds. " +
"this should be set to about the length of time your laser trainer " +
"stays on for each shot, typically about 100 ms")
parser.add_argument("-i", "--laser-intensity", type=self._check_intensity,
help="sets the intensity threshold for detecting the laser [0,255]. " +
"this should be as high as you can set it while still detecting " +
"shots")
parser.add_argument("-m", "--marker-radius", type=self._check_radius,
help="sets the radius of shot markers in pixels [1,20]")
parser.add_argument("-c", "--ignore-laser-color",
type=self._check_ignore_laser_color,
help="sets the color of laser that should be ignored by ShootOFF (green " +
"or red). No color is ignored by default")
args = parser.parse_args()
preferences[DEBUG] = args.debug
if args.detection_rate:
preferences[DETECTION_RATE] = args.detection_rate
if args.laser_intensity:
preferences[LASER_INTENSITY] = args.laser_intensity
if args.marker_radius:
preferences[MARKER_RADIUS] = args.marker_radius
if args.ignore_laser_color:
preferences[IGNORE_LASER_COLOR] = args.ignore_laser_color
self._preferences = preferences
self._config_parser = config
def __init__(self):
# Load configuration information from the config file, which will
# be over-ridden if settings are set on the command line
config, preferences = PreferencesEditor.map_configuration()
# Parse command line arguments
parser = argparse.ArgumentParser(prog="shootoff.py")
parser.add_argument("-d", "--debug", action="store_true",
help="turn on debug log messages")
parser.add_argument("-r", "--detection-rate", type=self._check_rate,
help="sets the rate at which shots are detected in milliseconds. " +
"this should be set to about the length of time your laser trainer " +
"stays on for each shot, typically about 100 ms")
parser.add_argument("-i", "--laser-intensity", type=self._check_intensity,
help="sets the intensity threshold for detecting the laser [0,255]. " +
"this should be as high as you can set it while still detecting " +
"shots")
parser.add_argument("-m", "--marker-radius", type=self._check_radius,
help="sets the radius of shot markers in pixels [1,20]")
parser.add_argument("-c", "--ignore-laser-color",
type=self._check_ignore_laser_color,
help="sets the color of laser that should be ignored by ShootOFF (green " +
"or red). No color is ignored by default")
args = parser.parse_args()
preferences[DEBUG] = args.debug
if args.detection_rate:
preferences[DETECTION_RATE] = args.detection_rate
if args.laser_intensity:
preferences[LASER_INTENSITY] = args.laser_intensity
if args.marker_radius:
preferences[MARKER_RADIUS] = args.marker_radius
if args.ignore_laser_color:
preferences[IGNORE_LASER_COLOR] = args.ignore_laser_color
self._preferences = preferences
self._config_parser = config
if value < 1 or value > 20:
raise argparse.ArgumentTypeError("MARKER_RADIUS must be a number " +
"between 1 and 20")
return value
def check_ignore_laser_color(ignore_laser_color):
ignore_laser_color = ignore_laser_color.lower()
if ignore_laser_color != "red" and ignore_laser_color != "green":
raise argparse.ArgumentTypeError("IGNORE_LASER_COLOR must be a string " +
"equal to either \"green\" or \"red\" without quotes")
return ignore_laser_color
if __name__ == "__main__":
# Load configuration information from the config file, which will
# be over-ridden if settings are set on the command line
config, preferences = PreferencesEditor.map_configuration()
# Parse command line arguments
parser = argparse.ArgumentParser(prog="shootoff.py")
parser.add_argument("-d", "--debug", action="store_true",
help="turn on debug log messages")
parser.add_argument("-r", "--detection-rate", type=check_rate,
help="sets the rate at which shots are detected in milliseconds. " +
"this should be set to about the length of time your laser trainer " +
"stays on for each shot, typically about 100 ms")
parser.add_argument("-i", "--laser-intensity", type=check_intensity,
help="sets the intensity threshold for detecting the laser [0,255]. " +
"this should be as high as you can set it while still detecting " +
"shots")
parser.add_argument("-m", "--marker-radius", type=check_radius,
help="sets the radius of shot markers in pixels [1,20]")
def edit_preferences(self):
preferences_editor = PreferencesEditor(self._window, self._config_parser,
self._preferences)
def __init__(self):
self._logger = None
# Load configuration information from the config file, which will
# be over-ridden if settings are set on the command line
config, preferences = PreferencesEditor.map_configuration()
# Parse command line arguments
parser = argparse.ArgumentParser(prog="shootoff.py")
parser.add_argument("-d",
"--debug",
action="store_true",
help="turn on debug log messages")
parser.add_argument(
"-r",
"--detection-rate",
type=self._check_rate,
help="sets the rate at which shots are detected in milliseconds. "
+
"this should be set to about the length of time your laser trainer "
+ "stays on for each shot, typically about 100 ms")
parser.add_argument(
"-i",
"--laser-intensity",
type=self._check_intensity,
help=
"sets the intensity threshold for detecting the laser [1,255]. " +
"this should be as high as you can set it while still detecting " +
"shots")
parser.add_argument(
"-m",
"--marker-radius",
type=self._check_radius,
help="sets the radius of shot markers in pixels [1,20]")
parser.add_argument("-v",
"--vidcam",
type=self._check_vidcam,
help="sets video camera to use [0,2]")
parser.add_argument(
"-c",
"--ignore-laser-color",
type=self._check_ignore_laser_color,
help=
"sets the color of laser that should be ignored by ShootOFF (green "
+ "or red). No color is ignored by default")
parser.add_argument(
"-u",
"--use-virtual-magazine",
type=self._check_virtual_magazine,
help=
"turns on the virtual magazine and sets the number rounds it holds"
)
parser.add_argument(
"-f",
"--use-malfunctions",
type=self._check_malfunctions,
help=
"turns on malfunctions and sets the probability of them happening")
args = parser.parse_args()
preferences[DEBUG] = args.debug
if args.detection_rate:
preferences[DETECTION_RATE] = int(args.detection_rate)
if args.laser_intensity:
preferences[LASER_INTENSITY] = int(args.laser_intensity)
if args.marker_radius:
preferences[MARKER_RADIUS] = int(args.marker_radius)
if args.vidcam >= 0:
preferences[VIDCAM] = int(args.vidcam)
if args.ignore_laser_color:
preferences[IGNORE_LASER_COLOR] = args.ignore_laser_color
if args.use_virtual_magazine:
preferences[USE_VIRTUAL_MAGAZINE] = True
preferences[VIRTUAL_MAGAZINE] = int(args.use_virtual_magazine)
if args.use_malfunctions:
preferences[USE_MALFUNCTIONS] = True
preferences[MALFUNCTION_PROBABILITY] = float(args.use_malfunctions)
self._preferences = preferences
self._config_parser = config
"between 0 and 255")
return value
def check_radius(radius):
value = int(radius)
if value < 1 or value > 20:
raise argparse.ArgumentTypeError("MARKER_RADIUS must be a number " +
"between 1 and 20")
return value
if __name__ == "__main__":
# Load configuration information from the config file, which will
# be over-ridden if settings are set on the command line
config, preferences = PreferencesEditor.map_configuration()
# Parse command line arguments
parser = argparse.ArgumentParser(prog="shootoff.py")
parser.add_argument("-d",
"--debug",
action="store_true",
help="turn on debug log messages")
parser.add_argument(
"-r",
"--detection-rate",
type=check_rate,
help="sets the rate at which shots are detected in milliseconds. " +
"this should be set to about the length of time your laser trainer " +
"stays on for each shot, typically about 100 ms")
parser.add_argument(
