def createGui(self):
self.panel = wx.Panel(self, -1, size=self.size)
self.panel.SetBackgroundColour(self.settings.bgcolor)
self.mainsizer = wx.BoxSizer(wx.VERTICAL)
self.uppersizer = MainToolbar(self)
self.lowersizer = wx.BoxSizer(wx.HORIZONTAL)
self.leftpane = LeftPane(self)
self.lowersizer.Add(self.leftpane)
self.hiddensizer = wx.BoxSizer(wx.HORIZONTAL)
self.lowersizer.Add(self.hiddensizer)
self.lowersizer.Hide(self.hiddensizer)
#self.vizlogsizer = wx.BoxSizer(wx.VERTICAL)
self.vizlogsizer = wx.GridBagSizer(hgap=5, vgap=5)
vp = VizPane(self)
#self.hiddensizer.Add(vp) #, 1, wx.EXPAND|wx.ALIGN_CENTER_HORIZONTAL)
#self.hiddensizer.Hide(vp)
self.leftpane.Add(vp, pos=(2, 5), span=(4, 1))
self.tempdisp = wx.StaticText(self.panel,
wx.ID_ANY,
"",
size=(300, 15))
self.graph = Graph(self, wx.ID_ANY)
#self.kb = KeyboardSizer(self)
self.vizlogsizer.Add(self.graph, pos=(0, 0)) # wx.ID_ANY)
#self.hiddensizer.Add(self.tempdisp)
self.vizlogsizer.Add(self.tempdisp, pos=(1, 0))
self.vizlogsizer.Add(LogPane(self), pos=(2, 0))
#self.vizlogsizer.Add(self.kb, pos=(0,0))
self.lowersizer.Add(self.vizlogsizer) #,wx.ID_ANY, wx.EXPAND)
self.centersizer = wx.GridBagSizer()
self.lowersizer.Add(self.centersizer)
self.mainsizer.Add(self.uppersizer)
self.mainsizer.Add(self.lowersizer) #, 1, wx.EXPAND)
self.panel.SetSizer(self.mainsizer)
self.status = self.CreateStatusBar()
self.status.SetStatusText(_("Нет соединения с принтером"))
self.panel.Bind(wx.EVT_MOUSE_EVENTS, self.editbutton)
self.Bind(wx.EVT_CLOSE, self.kill)
self.mainsizer.Layout()
self.mainsizer.Fit(self)
# disable all printer controls until we connect to a printer
self.pausebtn.Disable()
self.recoverbtn.Disable()
for i in self.printerControls:
i.Disable()
#self.panel.Fit()
self.cbuttons_reload()
self.graph.StartPlotting(1000)
def add_extra_controls(self, root, parentpanel, extra_buttons=None):
standalone_mode = extra_buttons is not None
base_line = 1 if standalone_mode else 2
root.monitorbox = wx.CheckBox(parentpanel, -1, _("Watch"))
root.monitorbox.SetValue(bool(root.settings.monitor))
root.monitorbox.SetToolTip(wx.ToolTip(_("Monitor Temperatures in Graph")))
if standalone_mode:
self.Add(root.monitorbox, pos=(0, 3), span=(1, 3))
else:
self.Add(root.monitorbox, pos=(base_line + 1, 5))
root.monitorbox.Bind(wx.EVT_CHECKBOX, root.setmonitor)
self.Add(wx.StaticText(parentpanel, -1, _("Heat:")),
pos=(base_line + 0, 0),
span=(1, 2),
flag=wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_RIGHT)
htemp_choices = [
root.temps[i] + " (" + i + ")"
for i in sorted(root.temps.keys(), key=lambda x: root.temps[x])
]
root.settoff = make_button(parentpanel,
_("Off"),
lambda e: root.do_settemp("off"),
_("Switch Hotend Off"),
size=(38, -1),
style=wx.BU_EXACTFIT)
root.printerControls.append(root.settoff)
self.Add(root.settoff, pos=(base_line + 0, 2), span=(1, 1))
if root.settings.last_temperature not in map(float, root.temps.values()):
htemp_choices = [str(root.settings.last_temperature)] + htemp_choices
root.htemp = wx.ComboBox(parentpanel,
-1,
choices=htemp_choices,
style=wx.CB_DROPDOWN,
size=(80, -1))
root.htemp.SetToolTip(wx.ToolTip(_("Select Temperature for Hotend")))
root.htemp.Bind(wx.EVT_COMBOBOX, root.htemp_change)
self.Add(root.htemp, pos=(base_line + 0, 3), span=(1, 1))
root.settbtn = make_button(parentpanel,
_("Set"),
root.do_settemp,
_("Switch Hotend On"),
size=(38, -1),
style=wx.BU_EXACTFIT)
root.printerControls.append(root.settbtn)
self.Add(root.settbtn, pos=(base_line + 0, 4), span=(1, 1))
self.Add(wx.StaticText(parentpanel, -1, _("Bed:")),
pos=(base_line + 1, 0),
span=(1, 2),
flag=wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_RIGHT)
btemp_choices = [
root.bedtemps[i] + " (" + i + ")"
for i in sorted(root.bedtemps.keys(), key=lambda x: root.temps[x])
]
root.setboff = make_button(parentpanel,
_("Off"),
lambda e: root.do_bedtemp("off"),
_("Switch Heated Bed Off"),
size=(38, -1),
style=wx.BU_EXACTFIT)
root.printerControls.append(root.setboff)
self.Add(root.setboff, pos=(base_line + 1, 2), span=(1, 1))
if root.settings.last_bed_temperature not in map(float,
root.bedtemps.values()):
btemp_choices = [str(root.settings.last_bed_temperature)
] + btemp_choices
root.btemp = wx.ComboBox(parentpanel,
-1,
choices=btemp_choices,
style=wx.CB_DROPDOWN,
size=(80, -1))
root.btemp.SetToolTip(wx.ToolTip(_("Select Temperature for Heated Bed")))
root.btemp.Bind(wx.EVT_COMBOBOX, root.btemp_change)
self.Add(root.btemp, pos=(base_line + 1, 3), span=(1, 1))
root.setbbtn = make_button(parentpanel,
_("Set"),
root.do_bedtemp,
_("Switch Heated Bed On"),
size=(38, -1),
style=wx.BU_EXACTFIT)
root.printerControls.append(root.setbbtn)
self.Add(root.setbbtn, pos=(base_line + 1, 4), span=(1, 1))
root.btemp.SetValue(str(root.settings.last_bed_temperature))
root.htemp.SetValue(str(root.settings.last_temperature))
## added for an error where only the bed would get (pla) or (abs).
#This ensures, if last temp is a default pla or abs, it will be marked so.
# if it is not, then a (user) remark is added. This denotes a manual entry
for i in btemp_choices:
if i.split()[0] == str(root.settings.last_bed_temperature).split(
'.')[0] or i.split()[0] == str(
root.settings.last_bed_temperature):
root.btemp.SetValue(i)
for i in htemp_choices:
if i.split()[0] == str(root.settings.last_temperature).split(
'.')[0] or i.split()[0] == str(root.settings.last_temperature):
root.htemp.SetValue(i)
if '(' not in root.btemp.Value:
root.btemp.SetValue(root.btemp.Value + ' (user)')
if '(' not in root.htemp.Value:
root.htemp.SetValue(root.htemp.Value + ' (user)')
root.tempdisp = wx.StaticText(parentpanel, -1, "")
if not extra_buttons:
ebuttonspanel = root.newPanel(parentpanel)
ebuttonssizer = wx.BoxSizer(wx.HORIZONTAL)
if root.settings.extruders > 1:
ebuttonssizer.Add(wx.StaticText(ebuttonspanel, -1, _("Tool:")),
flag=wx.ALIGN_CENTER)
if root.settings.extruders == 2:
root.extrudersel = wx.Button(ebuttonspanel,
-1,
"0",
style=wx.BU_EXACTFIT)
root.extrudersel.SetToolTip(
wx.ToolTip(_("Click to switch current extruder")))
def extrudersel_cb(event):
if root.extrudersel.GetLabel() == "1":
new = "0"
else:
new = "1"
root.extrudersel.SetLabel(new)
root.tool_change(event)
root.extrudersel.Bind(wx.EVT_BUTTON, extrudersel_cb)
root.extrudersel.GetValue = root.extrudersel.GetLabel
root.extrudersel.SetValue = root.extrudersel.SetLabel
else:
choices = [str(i) for i in range(0, root.settings.extruders)]
root.extrudersel = wx.ComboBox(ebuttonspanel,
-1,
choices=choices,
style=wx.CB_DROPDOWN
| wx.CB_READONLY,
size=(50, -1))
root.extrudersel.SetToolTip(
wx.ToolTip(_("Select current extruder")))
root.extrudersel.SetValue(choices[0])
root.extrudersel.Bind(wx.EVT_COMBOBOX, root.tool_change)
root.printerControls.append(root.extrudersel)
ebuttonssizer.Add(root.extrudersel)
ebuttonspanel.SetSizer(ebuttonssizer)
self.Add(ebuttonspanel,
pos=(base_line + 2, 0),
span=(1, 5),
flag=wx.EXPAND)
esettingspanel = root.newPanel(parentpanel)
esettingssizer = wx.BoxSizer(wx.HORIZONTAL)
root.edist = wx.SpinCtrl(esettingspanel,
-1,
str(root.settings.last_extrusion),
min=0,
max=1000,
size=(70, -1))
root.edist.SetBackgroundColour((225, 200, 200))
root.edist.SetForegroundColour("black")
root.edist.Bind(wx.EVT_SPINCTRL, root.setfeeds)
root.edist.Bind(wx.EVT_TEXT, root.setfeeds)
esettingssizer.Add(root.edist, flag=wx.ALIGN_CENTER | wx.RIGHT, border=5)
esettingssizer.Add(wx.StaticText(esettingspanel, -1, _("mm @")),
flag=wx.ALIGN_CENTER | wx.RIGHT,
border=5)
root.edist.SetToolTip(wx.ToolTip(_("Amount to Extrude or Retract (mm)")))
root.efeedc = wx.SpinCtrl(esettingspanel,
-1,
str(root.settings.e_feedrate),
min=0,
max=50000,
size=(70, -1))
root.efeedc.SetToolTip(wx.ToolTip(_("Extrude / Retract speed (mm/min)")))
root.efeedc.SetBackgroundColour((225, 200, 200))
root.efeedc.SetForegroundColour("black")
root.efeedc.Bind(wx.EVT_SPINCTRL, root.setfeeds)
root.efeedc.Bind(wx.EVT_TEXT, root.setfeeds)
esettingssizer.Add(root.efeedc, flag=wx.ALIGN_CENTER | wx.RIGHT, border=5)
esettingssizer.Add(wx.StaticText(esettingspanel, -1, _("mm/\nmin")),
flag=wx.ALIGN_CENTER)
esettingspanel.SetSizer(esettingssizer)
self.Add(esettingspanel, pos=(base_line + 3, 0), span=(1, 5))
gauges_base_line = base_line + 8 if standalone_mode else base_line + 5
if root.display_gauges:
root.hottgauge = TempGauge(parentpanel,
size=(-1, 24),
title=_("Heater:"),
maxval=300)
self.Add(root.hottgauge,
pos=(gauges_base_line + 0, 0),
span=(1, 6),
flag=wx.EXPAND)
root.bedtgauge = TempGauge(parentpanel,
size=(-1, 24),
title=_("Bed:"),
maxval=150)
self.Add(root.bedtgauge,
pos=(gauges_base_line + 1, 0),
span=(1, 6),
flag=wx.EXPAND)
def hotendgauge_scroll_setpoint(e):
rot = e.GetWheelRotation()
if rot > 0:
root.do_settemp(str(root.hsetpoint + 1))
elif rot < 0:
root.do_settemp(str(max(0, root.hsetpoint - 1)))
def bedgauge_scroll_setpoint(e):
rot = e.GetWheelRotation()
if rot > 0:
root.do_settemp(str(root.bsetpoint + 1))
elif rot < 0:
root.do_settemp(str(max(0, root.bsetpoint - 1)))
root.hottgauge.Bind(wx.EVT_MOUSEWHEEL, hotendgauge_scroll_setpoint)
root.bedtgauge.Bind(wx.EVT_MOUSEWHEEL, bedgauge_scroll_setpoint)
self.Add(root.tempdisp, pos=(gauges_base_line + 2, 0), span=(1, 6))
else:
self.Add(root.tempdisp, pos=(gauges_base_line + 0, 0), span=(1, 6))
if root.display_graph:
root.graph = Graph(parentpanel, wx.ID_ANY, root)
if standalone_mode:
self.Add(root.graph, pos=(base_line + 5, 0), span=(3, 6))
else:
self.Add(root.graph, pos=(base_line + 2, 5), span=(3, 1))
root.graph.Bind(wx.EVT_LEFT_DOWN, root.graph.showwin)
if extra_buttons:
pos_mapping = {
(2, 5): (0, 0),
(4, 0): (3, 0),
(4, 2): (3, 2),
}
span_mapping = {
(2, 5): (1, 3),
(4, 0): (1, 2),
(4, 2): (1, 3),
}
for i in extra_buttons:
btn = extra_buttons[i]
self.Add(btn,
pos=pos_mapping[i.pos],
span=span_mapping[i.pos],
flag=wx.EXPAND)
else:
for i in root.cpbuttons:
if not i.pos or i.pos[0] != 4:
continue
btn = make_custom_button(root,
ebuttonspanel,
i,
style=wx.BU_EXACTFIT)
ebuttonssizer.Add(btn, 1, flag=wx.EXPAND)
class MainWindow(wx.Frame):
def __init__(self, *args, **kwargs):
super(MainWindow, self).__init__(*args, **kwargs)
# this list will contain all controls that should be only enabled
# when we're connected to a printer
self.printerControls = []
def fullscreen(self, event):
self.ShowFullScreen(not self.IsFullScreen())
def createGui(self):
self.panel = wx.Panel(self, -1, size=self.size)
self.panel.SetBackgroundColour(self.settings.bgcolor)
self.mainsizer = wx.BoxSizer(wx.VERTICAL)
self.uppersizer = MainToolbar(self)
self.lowersizer = wx.BoxSizer(wx.HORIZONTAL)
self.leftpane = LeftPane(self)
self.lowersizer.Add(self.leftpane)
self.hiddensizer = wx.BoxSizer(wx.HORIZONTAL)
self.lowersizer.Add(self.hiddensizer)
self.lowersizer.Hide(self.hiddensizer)
#self.vizlogsizer = wx.BoxSizer(wx.VERTICAL)
self.vizlogsizer = wx.GridBagSizer(hgap=5, vgap=5)
vp = VizPane(self)
#self.hiddensizer.Add(vp) #, 1, wx.EXPAND|wx.ALIGN_CENTER_HORIZONTAL)
#self.hiddensizer.Hide(vp)
self.leftpane.Add(vp, pos=(2, 5), span=(4, 1))
self.tempdisp = wx.StaticText(self.panel,
wx.ID_ANY,
"",
size=(300, 15))
self.graph = Graph(self, wx.ID_ANY)
#self.kb = KeyboardSizer(self)
self.vizlogsizer.Add(self.graph, pos=(0, 0)) # wx.ID_ANY)
#self.hiddensizer.Add(self.tempdisp)
self.vizlogsizer.Add(self.tempdisp, pos=(1, 0))
self.vizlogsizer.Add(LogPane(self), pos=(2, 0))
#self.vizlogsizer.Add(self.kb, pos=(0,0))
self.lowersizer.Add(self.vizlogsizer) #,wx.ID_ANY, wx.EXPAND)
self.centersizer = wx.GridBagSizer()
self.lowersizer.Add(self.centersizer)
self.mainsizer.Add(self.uppersizer)
self.mainsizer.Add(self.lowersizer) #, 1, wx.EXPAND)
self.panel.SetSizer(self.mainsizer)
self.status = self.CreateStatusBar()
self.status.SetStatusText(_("Нет соединения с принтером"))
self.panel.Bind(wx.EVT_MOUSE_EVENTS, self.editbutton)
self.Bind(wx.EVT_CLOSE, self.kill)
self.mainsizer.Layout()
self.mainsizer.Fit(self)
# disable all printer controls until we connect to a printer
self.pausebtn.Disable()
self.recoverbtn.Disable()
for i in self.printerControls:
i.Disable()
#self.panel.Fit()
self.cbuttons_reload()
self.graph.StartPlotting(1000)
def __init__(self, root):
super(LeftPane, self).__init__()
llts = wx.BoxSizer(wx.HORIZONTAL)
self.Add(llts, pos=(0, 0), span=(1, 6))
self.xyzsizer = XYZControlsSizer(root)
self.Add(self.xyzsizer, pos=(1, 0), span=(1, 6), flag=wx.ALIGN_CENTER)
for i in root.cpbuttons:
btn = make_button(root.panel,
i.label,
root.procbutton,
i.tooltip,
style=wx.BU_EXACTFIT)
btn.SetBackgroundColour(i.background)
btn.SetForegroundColour("black")
btn.properties = i
root.btndict[i.command] = btn
root.printerControls.append(btn)
if i.pos == None:
if i.span == 0:
llts.Add(btn)
else:
self.Add(btn, pos=i.pos, span=i.span)
root.xyfeedc = wx.SpinCtrl(root.panel,
-1,
str(root.settings.xy_feedrate),
min=0,
max=50000,
size=(70, -1))
root.xyfeedc.SetToolTip(
wx.ToolTip("Set Maximum Speed for X & Y axes (mm/min)"))
llts.Add(wx.StaticText(root.panel, -1, _("XY:")),
flag=wx.ALIGN_RIGHT | wx.ALIGN_CENTER_VERTICAL)
llts.Add(root.xyfeedc)
llts.Add(wx.StaticText(root.panel, -1, _("mm/min Z:")),
flag=wx.ALIGN_RIGHT | wx.ALIGN_CENTER_VERTICAL)
root.zfeedc = wx.SpinCtrl(root.panel,
-1,
str(root.settings.z_feedrate),
min=0,
max=50000,
size=(70, -1))
root.zfeedc.SetToolTip(
wx.ToolTip("Set Maximum Speed for Z axis (mm/min)"))
llts.Add(root.zfeedc, )
root.monitorbox = wx.CheckBox(root.panel, -1, _("Watch"))
root.monitorbox.SetToolTip(wx.ToolTip("Monitor Temperatures in Graph"))
self.Add(root.monitorbox, pos=(3, 5))
root.monitorbox.Bind(wx.EVT_CHECKBOX, root.setmonitor)
self.Add(wx.StaticText(root.panel, -1, _("Heat:")),
pos=(2, 0),
span=(1, 1),
flag=wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_RIGHT)
htemp_choices = [
root.temps[i] + " (" + i + ")"
for i in sorted(root.temps.keys(), key=lambda x: root.temps[x])
]
root.settoff = make_button(root.panel,
_("Off"),
lambda e: root.do_settemp("off"),
_("Switch Hotend Off"),
size=(36, -1),
style=wx.BU_EXACTFIT)
root.printerControls.append(root.settoff)
self.Add(root.settoff, pos=(2, 1), span=(1, 1))
if root.settings.last_temperature not in map(float,
root.temps.values()):
htemp_choices = [str(root.settings.last_temperature)
] + htemp_choices
root.htemp = wx.ComboBox(root.panel,
-1,
choices=htemp_choices,
style=wx.CB_DROPDOWN,
size=(80, -1))
root.htemp.SetToolTip(wx.ToolTip("Select Temperature for Hotend"))
root.htemp.Bind(wx.EVT_COMBOBOX, root.htemp_change)
self.Add(root.htemp, pos=(2, 2), span=(1, 2))
root.settbtn = make_button(root.panel,
_("Set"),
root.do_settemp,
_("Switch Hotend On"),
size=(38, -1),
style=wx.BU_EXACTFIT)
root.printerControls.append(root.settbtn)
self.Add(root.settbtn, pos=(2, 4), span=(1, 1))
self.Add(wx.StaticText(root.panel, -1, _("Bed:")),
pos=(3, 0),
span=(1, 1),
flag=wx.ALIGN_CENTER_VERTICAL | wx.ALIGN_RIGHT)
btemp_choices = [
root.bedtemps[i] + " (" + i + ")"
for i in sorted(root.bedtemps.keys(), key=lambda x: root.temps[x])
]
root.setboff = make_button(root.panel,
_("Off"),
lambda e: root.do_bedtemp("off"),
_("Switch Heated Bed Off"),
size=(36, -1),
style=wx.BU_EXACTFIT)
root.printerControls.append(root.setboff)
self.Add(root.setboff, pos=(3, 1), span=(1, 1))
if root.settings.last_bed_temperature not in map(
float, root.bedtemps.values()):
btemp_choices = [str(root.settings.last_bed_temperature)
] + btemp_choices
root.btemp = wx.ComboBox(root.panel,
-1,
choices=btemp_choices,
style=wx.CB_DROPDOWN,
size=(80, -1))
root.btemp.SetToolTip(wx.ToolTip("Select Temperature for Heated Bed"))
root.btemp.Bind(wx.EVT_COMBOBOX, root.btemp_change)
self.Add(root.btemp, pos=(3, 2), span=(1, 2))
root.setbbtn = make_button(root.panel,
_("Set"),
root.do_bedtemp, ("Switch Heated Bed On"),
size=(38, -1),
style=wx.BU_EXACTFIT)
root.printerControls.append(root.setbbtn)
self.Add(root.setbbtn, pos=(3, 4), span=(1, 1))
root.btemp.SetValue(str(root.settings.last_bed_temperature))
root.htemp.SetValue(str(root.settings.last_temperature))
## added for an error where only the bed would get (pla) or (abs).
#This ensures, if last temp is a default pla or abs, it will be marked so.
# if it is not, then a (user) remark is added. This denotes a manual entry
for i in btemp_choices:
if i.split()[0] == str(root.settings.last_bed_temperature).split(
'.')[0] or i.split()[0] == str(
root.settings.last_bed_temperature):
root.btemp.SetValue(i)
for i in htemp_choices:
if i.split()[0] == str(root.settings.last_temperature).split(
'.')[0] or i.split()[0] == str(
root.settings.last_temperature):
root.htemp.SetValue(i)
if ('(' not in root.btemp.Value):
root.btemp.SetValue(root.btemp.Value + ' (user)')
if ('(' not in root.htemp.Value):
root.htemp.SetValue(root.htemp.Value + ' (user)')
root.tempdisp = wx.StaticText(root.panel, -1, "")
root.edist = wx.SpinCtrl(root.panel,
-1,
"5",
min=0,
max=1000,
size=(60, -1))
root.edist.SetBackgroundColour((225, 200, 200))
root.edist.SetForegroundColour("black")
self.Add(root.edist, pos=(4, 2), span=(1, 2))
self.Add(wx.StaticText(root.panel, -1, _("mm")),
pos=(4, 4),
span=(1, 1))
root.edist.SetToolTip(wx.ToolTip("Amount to Extrude or Retract (mm)"))
root.efeedc = wx.SpinCtrl(root.panel,
-1,
str(root.settings.e_feedrate),
min=0,
max=50000,
size=(60, -1))
root.efeedc.SetToolTip(wx.ToolTip("Extrude / Retract speed (mm/min)"))
root.efeedc.SetBackgroundColour((225, 200, 200))
root.efeedc.SetForegroundColour("black")
root.efeedc.Bind(wx.EVT_SPINCTRL, root.setfeeds)
self.Add(root.efeedc, pos=(5, 2), span=(1, 2))
self.Add(wx.StaticText(root.panel, -1, _("mm/\nmin")),
pos=(5, 4),
span=(1, 1))
root.xyfeedc.Bind(wx.EVT_SPINCTRL, root.setfeeds)
root.zfeedc.Bind(wx.EVT_SPINCTRL, root.setfeeds)
root.zfeedc.SetBackgroundColour((180, 255, 180))
root.zfeedc.SetForegroundColour("black")
root.graph = Graph(root.panel, wx.ID_ANY)
self.Add(root.graph, pos=(4, 5), span=(3, 1))
self.Add(root.tempdisp, pos=(7, 0), span=(1, 6))