def main():
db = Database(util.get_db_root(), util.get_part())
grid = db.grid()
luts = LutMaker()
def gen_sites(desired_site_type):
for tile_name in sorted(grid.tiles()):
loc = grid.loc_of_tilename(tile_name)
gridinfo = grid.gridinfo_at_loc(loc)
for site, site_type in gridinfo.sites.items():
if site_type == desired_site_type:
yield tile_name, site
print('''
module top();
(* KEEP, DONT_TOUCH *)
LUT6 dummy();
''')
for site_type in ["PCIE_2_1"]:
for _, site in gen_sites(site_type):
print_site(ports[site_type], luts, site, site_type)
for l in luts.create_wires_and_luts():
print(l)
print('endmodule')
def run():
luts = LutMaker()
count = bram_count()
max_bram_count = random.randint(1, 200)
modules = []
lines = []
idx = 0
while count > MAX_BRAM:
width, address_bits, bits = random_sdp_bram(luts, "ram{}".format(idx),
modules, lines)
brams = math.ceil(bits / float(36 * 1024))
count -= brams
print(width, address_bits, bits, brams, count, file=sys.stderr)
idx += 1
if idx >= max_bram_count:
break
for module in modules:
print(module)
print('''
module top();
''')
for lut in luts.create_wires_and_luts():
print(lut)
for l in lines:
print(l)
print("endmodule")
def main():
print('''
module top();
''')
luts = LutMaker()
lines = []
params_list = []
for tile_name, sites in gen_sites():
gen_fun = random.choice(
(ramb18, ramb18_2x, ramb36, fifo18, fifo18_ramb18, fifo36))
params_list.append(gen_fun(tile_name, luts, lines, sites))
for lut in luts.create_wires_and_luts():
print(lut)
for l in lines:
print(l)
print("endmodule")
with open('params.json', 'w') as f:
json.dump(params_list, f, indent=2)
def main():
"""
HCLK_CMT switch box has the follow inputs:
4 IOBs above and below
14 MMCM outputs
8 PLL outputs
4 PHASER_IN outputs
2 INT connections
and the following outputs:
3 PLLE2 inputs
2 BUFMR inputs
3 MMCM inputs
~2 MMCM -> BUFR???
"""
clock_sources = ClockSources()
adv_clock_sources = ClockSources()
site_to_cmt = dict(read_site_to_cmt())
db = Database(util.get_db_root())
grid = db.grid()
def gen_sites(desired_site_type):
for tile_name in sorted(grid.tiles()):
loc = grid.loc_of_tilename(tile_name)
gridinfo = grid.gridinfo_at_loc(loc)
for site, site_type in gridinfo.sites.items():
if site_type == desired_site_type:
yield tile_name, site
hclk_cmts = set()
ins = []
iobs = StringIO()
hclk_cmt_tiles = set()
for tile_name, site in gen_sites('BUFMRCE'):
cmt = site_to_cmt[site]
hclk_cmts.add(cmt)
hclk_cmt_tiles.add(tile_name)
mmcm_pll_only = random.randint(0, 1)
mmcm_pll_dir = random.choice(('ODD', 'EVEN', 'BOTH'))
print(
'// mmcm_pll_only {} mmcm_pll_dir {}'.format(
mmcm_pll_only, mmcm_pll_dir))
have_iob_clocks = random.random() > .1
iob_clks = {}
for tile_name in sorted(hclk_cmt_tiles):
for _, site, volt in get_paired_iobs(db, grid, tile_name):
iob_clock = 'clock_IBUF_{site}'.format(site=site)
cmt = site_to_cmt[site]
if cmt not in iob_clks:
iob_clks[cmt] = ['']
iob_clks[cmt].append(iob_clock)
ins.append('input clk_{site}'.format(site=site))
if have_iob_clocks:
if check_allowed(mmcm_pll_dir, cmt):
clock_sources.add_clock_source(iob_clock, cmt)
adv_clock_sources.add_clock_source(iob_clock, cmt)
print(
"""
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
wire clock_IBUF_{site};
IBUF #( .IOSTANDARD("LVCMOS{volt}") ) ibuf_{site} (
.I(clk_{site}),
.O(clock_IBUF_{site})
);
""".format(volt=volt, site=site),
file=iobs)
print(
'''
module top({inputs});
(* KEEP, DONT_TOUCH *)
LUT6 dummy();
'''.format(inputs=', '.join(ins)))
print(iobs.getvalue())
luts = LutMaker()
wires = StringIO()
bufhs = StringIO()
for _, site in gen_sites('MMCME2_ADV'):
mmcm_clocks = [
'mmcm_clock_{site}_{idx}'.format(site=site, idx=idx)
for idx in range(13)
]
if check_allowed(mmcm_pll_dir, site_to_cmt[site]):
for clk in mmcm_clocks:
clock_sources.add_clock_source(clk, site_to_cmt[site])
print(
"""
wire cin1_{site}, cin2_{site}, clkfbin_{site}, {c0}, {c1}, {c2}, {c3}, {c4}, {c5};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
MMCME2_ADV pll_{site} (
.CLKIN1(cin1_{site}),
.CLKIN2(cin2_{site}),
.CLKFBIN(clkfbin_{site}),
.CLKOUT0({c0}),
.CLKOUT0B({c1}),
.CLKOUT1({c2}),
.CLKOUT1B({c3}),
.CLKOUT2({c4}),
.CLKOUT2B({c5}),
.CLKOUT3({c6}),
.CLKOUT3B({c7}),
.CLKOUT4({c8}),
.CLKOUT5({c9}),
.CLKOUT6({c10}),
.CLKFBOUT({c11}),
.CLKFBOUTB({c12})
);
""".format(
site=site,
c0=mmcm_clocks[0],
c1=mmcm_clocks[1],
c2=mmcm_clocks[2],
c3=mmcm_clocks[3],
c4=mmcm_clocks[4],
c5=mmcm_clocks[5],
c6=mmcm_clocks[6],
c7=mmcm_clocks[7],
c8=mmcm_clocks[8],
c9=mmcm_clocks[9],
c10=mmcm_clocks[10],
c11=mmcm_clocks[11],
c12=mmcm_clocks[12],
))
for _, site in gen_sites('PLLE2_ADV'):
pll_clocks = [
'pll_clock_{site}_{idx}'.format(site=site, idx=idx)
for idx in range(7)
]
if check_allowed(mmcm_pll_dir, site_to_cmt[site]):
for clk in pll_clocks:
clock_sources.add_clock_source(clk, site_to_cmt[site])
print(
"""
wire cin1_{site}, cin2_{site}, clkfbin_{site}, {c0}, {c1}, {c2}, {c3}, {c4}, {c5}, {c6};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
PLLE2_ADV pll_{site} (
.CLKIN1(cin1_{site}),
.CLKIN2(cin2_{site}),
.CLKFBIN(clkfbin_{site}),
.CLKOUT0({c0}),
.CLKOUT1({c1}),
.CLKOUT2({c2}),
.CLKOUT3({c3}),
.CLKOUT4({c4}),
.CLKOUT5({c5}),
.CLKFBOUT({c6})
);
""".format(
site=site,
c0=pll_clocks[0],
c1=pll_clocks[1],
c2=pll_clocks[2],
c3=pll_clocks[3],
c4=pll_clocks[4],
c5=pll_clocks[5],
c6=pll_clocks[6],
))
for tile_name, site in gen_sites('BUFHCE'):
print(
"""
wire I_{site};
wire O_{site};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFHCE buf_{site} (
.I(I_{site}),
.O(O_{site})
);
""".format(site=site, ),
file=bufhs)
if site_to_cmt[site] in hclk_cmts:
if not mmcm_pll_only:
clock_sources.add_clock_source(
'O_{site}'.format(site=site), site_to_cmt[site])
adv_clock_sources.add_clock_source(
'O_{site}'.format(site=site), site_to_cmt[site])
hclks_used_by_cmt = {}
for cmt in site_to_cmt.values():
hclks_used_by_cmt[cmt] = set()
def check_hclk_src(src, src_cmt):
if len(hclks_used_by_cmt[src_cmt]
) >= 12 and src not in hclks_used_by_cmt[src_cmt]:
return None
else:
hclks_used_by_cmt[src_cmt].add(src)
return src
if random.random() > .10:
for tile_name, site in gen_sites('BUFHCE'):
wire_name = clock_sources.get_random_source(
site_to_cmt[site],
uses_left_right_routing=True,
no_repeats=mmcm_pll_only)
if wire_name is not None and 'BUFHCE' in wire_name:
# Looping a BUFHCE to a BUFHCE requires using a hclk in the
# CMT of the source
src_cmt = clock_sources.source_to_cmt[wire_name]
wire_name = check_hclk_src(wire_name, src_cmt)
if wire_name is None:
continue
print(
"""
assign I_{site} = {wire_name};""".format(
site=site,
wire_name=wire_name,
),
file=bufhs)
for tile_name, site in gen_sites('BUFMRCE'):
pass
for l in luts.create_wires_and_luts():
print(l)
print(wires.getvalue())
print(bufhs.getvalue())
for _, site in gen_sites('BUFR'):
adv_clock_sources.add_clock_source(
'O_{site}'.format(site=site), site_to_cmt[site])
print(
"""
wire O_{site};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFR bufr_{site} (
.I({I}),
.O(O_{site})
);""".format(I=random.choice(iob_clks[site_to_cmt[site]]), site=site))
for _, site in gen_sites('PLLE2_ADV'):
for cin in ('cin1', 'cin2', 'clkfbin'):
if random.random() > .2:
src = adv_clock_sources.get_random_source(site_to_cmt[site])
src_cmt = adv_clock_sources.source_to_cmt[src]
if 'IBUF' not in src and 'BUFR' not in src:
# Clocks from input pins do not require HCLK's, all other
# sources route from a global row clock.
src = check_hclk_src(src, src_cmt)
if src is None:
continue
print(
"""
assign {cin}_{site} = {csrc};
""".format(cin=cin, site=site, csrc=src))
for _, site in gen_sites('MMCME2_ADV'):
for cin in ('cin1', 'cin2', 'clkfbin'):
if random.random() > .2:
src = adv_clock_sources.get_random_source(site_to_cmt[site])
src_cmt = adv_clock_sources.source_to_cmt[src]
if 'IBUF' not in src and 'BUFR' not in src:
# Clocks from input pins do not require HCLK's, all other
# sources route from a global row clock.
src = check_hclk_src(src, src_cmt)
if src is None:
continue
print(
"""
assign {cin}_{site} = {csrc};
""".format(cin=cin, site=site, csrc=src))
print("endmodule")
def main():
print('''
module top(
input wire in,
output wire out
);
assign out = in;
''')
luts = LutMaker()
params_dict = {"tile_type": None}
params_list = list()
clkswing_cfg_tiles = dict()
ibufds_out_wires = dict()
for tile_name, _, site_name, _ in gen_sites("GTP_COMMON", "IBUFDS_GTE2"):
# Both the IBUFDS_GTE2 in the same tile need to have
# the same CLKSWING_CFG parameter
if tile_name not in clkswing_cfg_tiles:
clkswing_cfg = random.randint(0, 3)
clkswing_cfg_tiles[tile_name] = clkswing_cfg
else:
clkswing_cfg = clkswing_cfg_tiles[tile_name]
in_use = bool(random.randint(0, 9))
params = {
"site":
site_name,
"tile":
tile_name,
"IN_USE":
in_use,
"CLKRCV_TRST":
verilog.quote("TRUE" if random.randint(0, 1) else "FALSE"),
"CLKCM_CFG":
verilog.quote("TRUE" if random.randint(0, 1) else "FALSE"),
"CLKSWING_CFG":
clkswing_cfg,
}
if in_use:
ibufds_out_wire = "{}_O".format(site_name)
if tile_name not in ibufds_out_wires:
ibufds_out_wires[tile_name] = list()
ibufds_out_wires[tile_name].append(
(ibufds_out_wire, int(site_name[-1]) % 2))
print("wire {};".format(ibufds_out_wire))
print("(* KEEP, DONT_TOUCH, LOC=\"{}\" *)".format(site_name))
print("""
IBUFDS_GTE2 #(
.CLKRCV_TRST({CLKRCV_TRST}),
.CLKCM_CFG({CLKCM_CFG}),
.CLKSWING_CFG({CLKSWING_CFG})
) {site} (
.O({out})
);""".format(**params, out=ibufds_out_wire))
params_list.append(params)
DRP_PORTS = [("DRPCLK", "clk"), ("DRPEN", "in"), ("DRPWE", "in"),
("DRPRDY", "out")]
for tile_name, tile_type, site_name, cmt in gen_sites(
"GTP_COMMON", "GTPE2_COMMON"):
params_dict["tile_type"] = tile_type
params = dict()
params['site'] = site_name
params['tile'] = tile_name
verilog_attr = ""
verilog_attr = "#("
fuz_dir = os.getenv("FUZDIR", None)
assert fuz_dir
with open(os.path.join(fuz_dir, "attrs.json"), "r") as attrs_file:
attrs = json.load(attrs_file)
in_use = bool(random.randint(0, 9))
params["IN_USE"] = in_use
if in_use:
for param, param_info in attrs.items():
param_type = param_info["type"]
param_values = param_info["values"]
param_digits = param_info["digits"]
if param_type == INT:
value = random.choice(param_values)
value_str = value
else:
assert param_type == BIN
value = random.randint(0, param_values[0])
value_str = "{digits}'b{value:0{digits}b}".format(
value=value, digits=param_digits)
params[param] = value
verilog_attr += """
.{}({}),""".format(param, value_str)
for param in ["PLL0LOCKDETCLK", "PLL1LOCKDETCLK", "DRPCLK"]:
is_inverted = random.randint(0, 1)
params[param] = is_inverted
verilog_attr += """
.IS_{}_INVERTED({}),""".format(param, is_inverted)
verilog_attr = verilog_attr.rstrip(",")
verilog_attr += "\n)"
verilog_ports = ""
for param in [
"GTREFCLK0_USED", "GTREFCLK1_USED", "BOTH_GTREFCLK_USED"
]:
params[param] = 0
if tile_name in ibufds_out_wires:
gtrefclk_ports_used = 0
for wire, location in ibufds_out_wires[tile_name]:
if random.random() < 0.5:
continue
verilog_ports += """
.GTREFCLK{}({}),""".format(location, wire)
gtrefclk_ports_used += 1
params["GTREFCLK{}_USED".format(location)] = 1
if gtrefclk_ports_used == 2:
params["BOTH_GTREFCLK_USED"] = 1
enable_drp = random.randint(0, 1)
params["ENABLE_DRP"] = enable_drp
for _, _, channel_site_name, _ in gen_sites(
"GTP_CHANNEL", "GTPE2_CHANNEL", cmt):
if not enable_drp:
break
verilog_ports_channel = ""
for port, direction in DRP_PORTS:
if direction == "in":
verilog_ports_channel += """
.{}({}),""".format(port, luts.get_next_output_net())
elif direction == "clk":
# DRPCLK needs to come from a clock source
print("""
wire clk_bufg_{site};
(* KEEP, DONT_TOUCH *)
BUFG bufg_{site} (.O(clk_bufg_{site}));""".format(site=channel_site_name))
verilog_ports_channel += """
.{}(clk_bufg_{}),""".format(port, channel_site_name)
elif direction == "out":
verilog_ports_channel += """
.{}({}),""".format(port, luts.get_next_input_net())
print("""
(* KEEP, DONT_TOUCH, LOC=\"{site}\" *)
GTPE2_CHANNEL {site} (
{ports}
);""".format(ports=verilog_ports_channel.rstrip(","), site=channel_site_name))
print("""
(* KEEP, DONT_TOUCH, LOC=\"{site}\" *)
GTPE2_COMMON {attrs} {site} (
{ports}
);""".format(attrs=verilog_attr,
ports=verilog_ports.rstrip(","),
site=site_name))
params_list.append(params)
for l in luts.create_wires_and_luts():
print(l)
print("endmodule")
params_dict["params"] = params_list
with open('params.json', 'w') as f:
json.dump(params_dict, f, indent=2)
def main():
"""
HCLK_IOI has the following inputs:
12 (east) BUFH from the right side of the HROW
12 (west) Bounce PIPs from one BUFH to any of 6 GCLK_BOT and 6 GCLK_TOP
4 (east) PHSR_PERFCLK (IOCLK_PLL) from HCLK_CLB to input of BUFIO
8 (4 north and 4 south) BUFR CLR and CE
2 (south) I2IOCLK to input of BUFR
2 (north) I2IOCLK to input of BUFR
2 RCLK IMUX (IMUX0 and IMUX1) choosing input of BUFR
outputs:
4 (east) BUFRCLK - from BUFR to HROW
4 (north) BUFR2IO - from BUFR
4 (north) IOCLK from BUFIO
"""
global_clock_sources = ClockSources()
cmt_clock_sources = ClockSources()
cmt_fast_clock_sources = ClockSources(4)
bufr_clock_sources = ClockSources()
bufio_clock_sources = ClockSources()
site_to_cmt = dict(read_site_to_cmt())
clock_region_limit = dict()
clock_region_serdes_location = dict()
db = Database(util.get_db_root(), util.get_part())
grid = db.grid()
def gen_sites(desired_site_type):
for tile_name in sorted(grid.tiles()):
loc = grid.loc_of_tilename(tile_name)
gridinfo = grid.gridinfo_at_loc(loc)
for site, site_type in gridinfo.sites.items():
if site_type == desired_site_type:
yield tile_name, site
def serdes_relative_location(tile, site):
(serdes_loc_x, serdes_loc_y) = grid.loc_of_tilename(tile)
serdes_clk_reg = site_to_cmt[site]
for tile_name in sorted(grid.tiles()):
if 'HCLK_IOI3' in tile_name:
(hclk_tile_loc_x,
hclk_tile_loc_y) = grid.loc_of_tilename(tile_name)
if hclk_tile_loc_x == serdes_loc_x:
gridinfo = grid.gridinfo_at_loc(
(hclk_tile_loc_x, hclk_tile_loc_y))
random_site = next(iter(gridinfo.sites.keys()))
hclk_clk_reg = site_to_cmt[random_site]
if hclk_clk_reg == serdes_clk_reg:
if serdes_loc_y < hclk_tile_loc_y:
return "TOP"
elif serdes_loc_y > hclk_tile_loc_y:
return "BOTTOM"
else:
assert False
clock_region_sites = set()
def get_clock_region_site(site_type, clk_reg):
for site_name, reg in site_to_cmt.items():
if site_name.startswith(site_type) and reg in clk_reg:
if site_name not in clock_region_sites:
clock_region_sites.add(site_name)
return site_name
print('''
module top();
(* KEEP, DONT_TOUCH *)
LUT6 dummy();
''')
luts = LutMaker()
bufs = StringIO()
for _, site in gen_sites('MMCME2_ADV'):
mmcm_clocks = [
'mmcm_clock_{site}_{idx}'.format(site=site, idx=idx)
for idx in range(13)
]
for idx, clk in enumerate(mmcm_clocks):
if idx < 4:
cmt_fast_clock_sources.add_clock_source(clk, site_to_cmt[site])
else:
cmt_clock_sources.add_clock_source(clk, site_to_cmt[site])
print("""
wire cin1_{site}, cin2_{site}, clkfbin_{site}, {c0}, {c1}, {c2}, {c3}, {c4}, {c5};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
MMCME2_ADV pll_{site} (
.CLKIN1(cin1_{site}),
.CLKIN2(cin2_{site}),
.CLKFBIN(clkfbin_{site}),
.CLKOUT0({c0}),
.CLKOUT0B({c4}),
.CLKOUT1({c1}),
.CLKOUT1B({c5}),
.CLKOUT2({c2}),
.CLKOUT2B({c6}),
.CLKOUT3({c3}),
.CLKOUT3B({c7}),
.CLKOUT4({c8}),
.CLKOUT5({c9}),
.CLKOUT6({c10}),
.CLKFBOUT({c11}),
.CLKFBOUTB({c12})
);
""".format(
site=site,
c0=mmcm_clocks[0],
c1=mmcm_clocks[1],
c2=mmcm_clocks[2],
c3=mmcm_clocks[3],
c4=mmcm_clocks[4],
c5=mmcm_clocks[5],
c6=mmcm_clocks[6],
c7=mmcm_clocks[7],
c8=mmcm_clocks[8],
c9=mmcm_clocks[9],
c10=mmcm_clocks[10],
c11=mmcm_clocks[11],
c12=mmcm_clocks[12],
))
for _, site in gen_sites('PLLE2_ADV'):
pll_clocks = [
'pll_clock_{site}_{idx}'.format(site=site, idx=idx)
for idx in range(7)
]
for clk in pll_clocks:
cmt_clock_sources.add_clock_source(clk, site_to_cmt[site])
print("""
wire cin1_{site}, cin2_{site}, clkfbin_{site}, {c0}, {c1}, {c2}, {c3}, {c4}, {c5}, {c6};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
PLLE2_ADV pll_{site} (
.CLKIN1(cin1_{site}),
.CLKIN2(cin2_{site}),
.CLKFBIN(clkfbin_{site}),
.CLKOUT0({c0}),
.CLKOUT1({c1}),
.CLKOUT2({c2}),
.CLKOUT3({c3}),
.CLKOUT4({c4}),
.CLKOUT5({c5}),
.CLKFBOUT({c6})
);
""".format(
site=site,
c0=pll_clocks[0],
c1=pll_clocks[1],
c2=pll_clocks[2],
c3=pll_clocks[3],
c4=pll_clocks[4],
c5=pll_clocks[5],
c6=pll_clocks[6],
))
for tile_name, site in gen_sites('BUFHCE'):
print("""
wire I_{site};
wire O_{site};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFHCE buf_{site} (
.I(I_{site}),
.O(O_{site})
);""".format(site=site),
file=bufs)
global_clock_sources.add_clock_source('O_{site}'.format(site=site),
site_to_cmt[site])
hclks_used_by_clock_region = {}
for cmt in site_to_cmt.values():
hclks_used_by_clock_region[cmt] = set()
def check_hclk_src(src, src_cmt):
if len(hclks_used_by_clock_region[src_cmt]
) >= 12 and src not in hclks_used_by_clock_region[src_cmt]:
return None
else:
hclks_used_by_clock_region[src_cmt].add(src)
return src
cmt_clks_used_by_clock_region = {}
for cmt in site_to_cmt.values():
cmt_clks_used_by_clock_region[cmt] = list()
def check_cmt_clk_src(src, src_clock_region):
print("//src: {}, clk_reg: {}, len {}".format(
src, src_clock_region,
len(cmt_clks_used_by_clock_region[src_clock_region])))
if len(cmt_clks_used_by_clock_region[src_clock_region]) >= 4:
return None
else:
cmt_clks_used_by_clock_region[src_clock_region].append(src)
return src
#Add IDELAYCTRL
idelayctrl_in_clock_region = {}
for cmt in site_to_cmt.values():
idelayctrl_in_clock_region[cmt] = False
for _, site in gen_sites('IDELAYCTRL'):
if random.random() < 0.5:
wire_name = global_clock_sources.get_random_source(
site_to_cmt[site], no_repeats=False)
if wire_name is None:
continue
src_cmt = global_clock_sources.source_to_cmt[wire_name]
wire_name = check_hclk_src(wire_name, src_cmt)
if wire_name is None:
continue
idelayctrl_in_clock_region[src_cmt] = True
print("""
assign I_{site} = {clock_source};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
IDELAYCTRL idelay_ctrl_{site} (
.RDY(),
.REFCLK(I_{site}),
.RST()
);""".format(site=site, clock_source=wire_name))
# Add SERDES driven by BUFH or MMCM
for tile, site in gen_sites('ILOGICE3'):
wire_name = None
clock_region = site_to_cmt[site]
if clock_region not in clock_region_limit:
# Select serdes limit and relative location per clock region
serdes_location = random.choice(["TOP", "BOTTOM", "ANY"])
if serdes_location in "ANY":
#We want TOP and BOTTOM IGCLK PIPs occupied but leave one slot for IDELAYCTRL
if idelayctrl_in_clock_region[clock_region]:
clock_region_limit[clock_region] = 0 if random.random(
) < 0.2 else 11
else:
clock_region_limit[clock_region] = 0 if random.random(
) < 0.2 else 12
else:
if idelayctrl_in_clock_region[clock_region]:
clock_region_limit[clock_region] = 0 if random.random(
) < 0.2 else 5
else:
clock_region_limit[clock_region] = 0 if random.random(
) < 0.2 else 6
clock_region_serdes_location[clock_region] = serdes_location
# We reached the limit of hclks in this clock region
if clock_region_limit[clock_region] == 0:
continue
# Add a serdes if it's located at the correct side from the HCLK_IOI tile
if clock_region_serdes_location[clock_region] not in "ANY" and \
serdes_relative_location(tile, site) != clock_region_serdes_location[clock_region]:
continue
if random.random() > 0.1:
wire_name = global_clock_sources.get_random_source(
site_to_cmt[site], no_repeats=True)
if wire_name is None:
continue
src_cmt = global_clock_sources.source_to_cmt[wire_name]
wire_name = check_hclk_src(wire_name, src_cmt)
if wire_name is None:
print("//wire is None")
continue
clock_region_limit[clock_region] -= 1
print("""
assign serdes_clk_{site} = {clock_source};""".format(
site=site, clock_source=wire_name))
else:
wire_name = cmt_fast_clock_sources.get_random_source(
site_to_cmt[site], no_repeats=False)
if wire_name is None:
continue
src_cmt = cmt_fast_clock_sources.source_to_cmt[wire_name]
wire_name = check_cmt_clk_src(wire_name, src_cmt)
if wire_name is None:
continue
bufio_site = get_clock_region_site("BUFIO", clock_region)
if bufio_site is None:
continue
print("""
assign serdes_clk_{serdes_loc} = O_{site};
assign I_{site} = {clock_source};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFIO bufio_{site} (
.O(O_{site}),
.I(I_{site})
);""".format(site=bufio_site, clock_source=wire_name, serdes_loc=site))
print("// clock_region: {} {}".format(
clock_region, clock_region_serdes_location[clock_region]))
print("""
(* KEEP, DONT_TOUCH, LOC = "{loc}" *)
ISERDESE2 #(
.DATA_RATE("SDR"),
.DATA_WIDTH(4),
.DYN_CLKDIV_INV_EN("FALSE"),
.DYN_CLK_INV_EN("FALSE"),
.INIT_Q1(1'b0),
.INIT_Q2(1'b0),
.INIT_Q3(1'b0),
.INIT_Q4(1'b0),
.INTERFACE_TYPE("OVERSAMPLE"),
.IOBDELAY("NONE"),
.NUM_CE(2),
.OFB_USED("FALSE"),
.SERDES_MODE("MASTER"),
.SRVAL_Q1(1'b0),
.SRVAL_Q2(1'b0),
.SRVAL_Q3(1'b0),
.SRVAL_Q4(1'b0)
)
ISERDESE2_inst_{loc} (
.CLK(serdes_clk_{loc}),
.CLKB(),
.CLKDIV(),
.D(1'b0),
.DDLY(),
.OFB(),
.OCLKB(),
.RST(),
.SHIFTIN1(),
.SHIFTIN2()
);
""".format(loc=site, clock_source=wire_name))
# BUFRs
for _, site in gen_sites('BUFR'):
if random.random() < 0.6:
if random.random() < 0.5:
wire_name = luts.get_next_output_net()
else:
wire_name = cmt_fast_clock_sources.get_random_source(
site_to_cmt[site], no_repeats=False)
if wire_name is None:
continue
src_cmt = cmt_fast_clock_sources.source_to_cmt[wire_name]
wire_name = check_cmt_clk_src(wire_name, src_cmt)
if wire_name is None:
continue
bufr_clock_sources.add_clock_source('O_{site}'.format(site=site),
site_to_cmt[site])
# Add DIVIDE
divide = "BYPASS"
if random.random() < 0.5:
divide = "".format(random.randint(2, 8))
print("""
assign I_{site} = {clock_source};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFR #(.BUFR_DIVIDE("{divide}")) bufr_{site} (
.O(O_{site}),
.I(I_{site})
);""".format(site=site, clock_source=wire_name, divide=divide),
file=bufs)
for _, site in gen_sites('MMCME2_ADV'):
wire_name = bufr_clock_sources.get_random_source(site_to_cmt[site],
no_repeats=True)
if wire_name is None:
continue
print("""
assign cin1_{site} = {wire_name};""".format(site=site,
wire_name=wire_name))
print(bufs.getvalue())
for l in luts.create_wires_and_luts():
print(l)
print("endmodule")
def main():
params_list = []
num_clocks = 0
outputs = []
luts = LutMaker()
for tile_name, x_min, y_min, sites, iobs in gen_sites():
ioclks = []
for iob in iobs:
ioclk = 'clk_{}'.format(iob)
ioclks.append(ioclk)
idx = num_clocks
num_clocks += 1
outputs.append('''
wire {ioclk};
(* KEEP, DONT_TOUCH, LOC="{site}" *)
IBUF #(
.IOSTANDARD("LVCMOS33")
) ibuf_{site} (
.I(clks[{idx}]),
.O({ioclk})
);'''.format(
ioclk=ioclk,
site=iob,
idx=idx,
))
for site, x, y in sites:
params = {}
params['tile'] = tile_name
params['site'] = site
params['IN_USE'] = random.randint(0, 1)
params['x'] = x - x_min
params['y'] = y - y_min
if params['IN_USE']:
params['BUFR_DIVIDE'] = random.choice((
'"BYPASS"',
'1',
'2',
'3',
'4',
'5',
'6',
'7',
'8',
))
params['I'] = random.choice(ioclks)
if params['BUFR_DIVIDE'] == '"BYPASS"':
params['CE'] = '1'
params['CLR'] = '0'
else:
params['CE'] = luts.get_next_output_net()
params['CLR'] = luts.get_next_output_net()
outputs.append('''
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFR #(
.BUFR_DIVIDE({BUFR_DIVIDE})
) buf_{site} (
.CE({CE}),
.CLR({CLR}),
.I({I})
);
'''.format(**params))
params_list.append(params)
print('''
module top(input [{n1}:0] clks);
'''.format(n1=num_clocks - 1))
print("""
(* KEEP, DONT_TOUCH *)
LUT6 dummy (
);""")
for l in luts.create_wires_and_luts():
print(l)
for l in outputs:
print(l)
print("endmodule")
with open('params.json', 'w') as f:
json.dump(params_list, f, indent=2)
def main():
"""
HCLK_CMT switch box has the follow inputs:
4 IOBs above and below
14 MMCM outputs
8 PLL outputs
4 PHASER_IN outputs
2 INT connections
and the following outputs:
3 PLLE2 inputs
2 BUFMR inputs
3 MMCM inputs
~2 MMCM -> BUFR???
"""
clock_sources = ClockSources()
adv_clock_sources = ClockSources()
tile_site_cmt = list(read_site_to_cmt())
site_to_cmt = {tsc[1]: tsc[2] for tsc in tile_site_cmt}
cmt_to_hclk = {
tsc[2]: tsc[0]
for tsc in tile_site_cmt if tsc[0].startswith("HCLK_CMT_")
}
ccio_route_options = make_ccio_route_options()
db = Database(util.get_db_root(), util.get_part())
grid = db.grid()
def gen_sites(desired_site_type):
for tile_name in sorted(grid.tiles()):
loc = grid.loc_of_tilename(tile_name)
gridinfo = grid.gridinfo_at_loc(loc)
for site, site_type in gridinfo.sites.items():
if site_type == desired_site_type:
yield tile_name, site
hclk_cmts = set()
ins = []
iobs = StringIO()
hclk_cmt_tiles = set()
for tile_name, site in gen_sites('BUFMRCE'):
cmt = site_to_cmt[site]
hclk_cmts.add(cmt)
hclk_cmt_tiles.add(tile_name)
mmcm_pll_only = random.randint(0, 1)
mmcm_pll_dir = random.choice(('ODD', 'EVEN', 'BOTH'))
print('// mmcm_pll_only {} mmcm_pll_dir {}'.format(mmcm_pll_only,
mmcm_pll_dir))
have_iob_clocks = random.random() > .1
iob_to_hclk = {}
iob_clks = {}
for tile_name in sorted(hclk_cmt_tiles):
for _, site, volt, ccio in get_paired_iobs(db, grid, tile_name):
iob_clock = 'clock_IBUF_{site}'.format(site=site)
iob_to_hclk[site] = (tile_name, ccio)
cmt = site_to_cmt[site]
if cmt not in iob_clks:
iob_clks[cmt] = ['']
iob_clks[cmt].append(iob_clock)
ins.append('input clk_{site}'.format(site=site))
if have_iob_clocks:
if check_allowed(mmcm_pll_dir, cmt):
clock_sources.add_clock_source(iob_clock, cmt)
adv_clock_sources.add_clock_source(iob_clock, cmt)
print("""
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
wire clock_IBUF_{site};
IBUF #( .IOSTANDARD("LVCMOS{volt}") ) ibuf_{site} (
.I(clk_{site}),
.O(clock_IBUF_{site})
);
""".format(volt=volt, site=site),
file=iobs)
print('''
module top({inputs});
(* KEEP, DONT_TOUCH *)
LUT6 dummy();
'''.format(inputs=', '.join(ins)))
print(iobs.getvalue())
luts = LutMaker()
wires = StringIO()
bufhs = StringIO()
for _, site in gen_sites('MMCME2_ADV'):
mmcm_clocks = [
'mmcm_clock_{site}_{idx}'.format(site=site, idx=idx)
for idx in range(13)
]
if check_allowed(mmcm_pll_dir, site_to_cmt[site]):
for clk in mmcm_clocks:
clock_sources.add_clock_source(clk, site_to_cmt[site])
print("""
wire cin1_{site}, cin2_{site}, clkfbin_{site}, {c0}, {c1}, {c2}, {c3}, {c4}, {c5};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
MMCME2_ADV pll_{site} (
.CLKIN1(cin1_{site}),
.CLKIN2(cin2_{site}),
.CLKFBIN(clkfbin_{site}),
.CLKOUT0({c0}),
.CLKOUT0B({c1}),
.CLKOUT1({c2}),
.CLKOUT1B({c3}),
.CLKOUT2({c4}),
.CLKOUT2B({c5}),
.CLKOUT3({c6}),
.CLKOUT3B({c7}),
.CLKOUT4({c8}),
.CLKOUT5({c9}),
.CLKOUT6({c10}),
.CLKFBOUT({c11}),
.CLKFBOUTB({c12})
);
""".format(
site=site,
c0=mmcm_clocks[0],
c1=mmcm_clocks[1],
c2=mmcm_clocks[2],
c3=mmcm_clocks[3],
c4=mmcm_clocks[4],
c5=mmcm_clocks[5],
c6=mmcm_clocks[6],
c7=mmcm_clocks[7],
c8=mmcm_clocks[8],
c9=mmcm_clocks[9],
c10=mmcm_clocks[10],
c11=mmcm_clocks[11],
c12=mmcm_clocks[12],
))
for _, site in gen_sites('PLLE2_ADV'):
pll_clocks = [
'pll_clock_{site}_{idx}'.format(site=site, idx=idx)
for idx in range(7)
]
if check_allowed(mmcm_pll_dir, site_to_cmt[site]):
for clk in pll_clocks:
clock_sources.add_clock_source(clk, site_to_cmt[site])
print("""
wire cin1_{site}, cin2_{site}, clkfbin_{site}, {c0}, {c1}, {c2}, {c3}, {c4}, {c5}, {c6};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
PLLE2_ADV pll_{site} (
.CLKIN1(cin1_{site}),
.CLKIN2(cin2_{site}),
.CLKFBIN(clkfbin_{site}),
.CLKOUT0({c0}),
.CLKOUT1({c1}),
.CLKOUT2({c2}),
.CLKOUT3({c3}),
.CLKOUT4({c4}),
.CLKOUT5({c5}),
.CLKFBOUT({c6})
);
""".format(
site=site,
c0=pll_clocks[0],
c1=pll_clocks[1],
c2=pll_clocks[2],
c3=pll_clocks[3],
c4=pll_clocks[4],
c5=pll_clocks[5],
c6=pll_clocks[6],
))
for tile_name, site in gen_sites('BUFHCE'):
print("""
wire I_{site};
wire O_{site};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFHCE buf_{site} (
.I(I_{site}),
.O(O_{site})
);
""".format(site=site, ),
file=bufhs)
if site_to_cmt[site] in hclk_cmts:
if not mmcm_pll_only:
clock_sources.add_clock_source('O_{site}'.format(site=site),
site_to_cmt[site])
adv_clock_sources.add_clock_source('O_{site}'.format(site=site),
site_to_cmt[site])
hclks_used_by_cmt = {}
for cmt in site_to_cmt.values():
hclks_used_by_cmt[cmt] = set()
def check_hclk_src(src, src_cmt):
if len(hclks_used_by_cmt[src_cmt]
) >= 12 and src not in hclks_used_by_cmt[src_cmt]:
return None
else:
hclks_used_by_cmt[src_cmt].add(src)
return src
# Track used IOB sources
used_iob_clks = set()
if random.random() > .10:
for tile_name, site in gen_sites('BUFHCE'):
wire_name = clock_sources.get_random_source(
site_to_cmt[site],
uses_left_right_routing=True,
no_repeats=mmcm_pll_only)
if wire_name is not None and 'BUFHCE' in wire_name:
# Looping a BUFHCE to a BUFHCE requires using a hclk in the
# CMT of the source
src_cmt = clock_sources.source_to_cmt[wire_name]
wire_name = check_hclk_src(wire_name, src_cmt)
if wire_name is None:
continue
if "IBUF" in wire_name:
used_iob_clks.add(wire_name)
clock_sources.remove_clock_source(wire_name)
adv_clock_sources.remove_clock_source(wire_name)
print("""
assign I_{site} = {wire_name};""".format(
site=site,
wire_name=wire_name,
),
file=bufhs)
for tile_name, site in gen_sites('BUFMRCE'):
pass
for l in luts.create_wires_and_luts():
print(l)
print(wires.getvalue())
print(bufhs.getvalue())
for _, site in gen_sites('BUFR'):
# Do not use BUFR always
if random.random() < 0.50:
continue
available_srcs = set(iob_clks[site_to_cmt[site]]) - used_iob_clks
if len(available_srcs) == 0:
continue
src = random.choice(list(available_srcs))
if src != "":
used_iob_clks.add(src)
clock_sources.remove_clock_source(src)
adv_clock_sources.remove_clock_source(src)
adv_clock_sources.add_clock_source('O_{site}'.format(site=site),
site_to_cmt[site])
print("""
wire O_{site};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFR bufr_{site} (
.I({I}),
.O(O_{site})
);""".format(I=src, site=site))
route_file = open("routes.txt", "w")
def fix_ccio_route(net):
# Get the IOB site name
match = re.match(r".*_IBUF_(.*)", net)
assert match is not None, net
iob_site = match.group(1)
# Get associated HCLK_CMT tile and CCIO wire index
hclk_tile_name, ccio = iob_to_hclk[iob_site]
# Get HCLK_CMT tile type
hclk_tile = hclk_tile_name.rsplit("_", maxsplit=1)[0]
# Pick a random route option
opts = list(ccio_route_options[hclk_tile][ccio])
route = random.choice(opts)
route = "{}/{}".format(hclk_tile_name, route)
route_file.write("{} {}\n".format(net, route))
for _, site in gen_sites('PLLE2_ADV'):
for cin in ('cin1', 'cin2', 'clkfbin'):
if random.random() > .2:
src = adv_clock_sources.get_random_source(site_to_cmt[site])
src_cmt = adv_clock_sources.source_to_cmt[src]
if 'IBUF' not in src and 'BUFR' not in src:
# Clocks from input pins do not require HCLK's, all other
# sources route from a global row clock.
src = check_hclk_src(src, src_cmt)
if src is None:
continue
if "IBUF" in src:
clock_sources.remove_clock_source(src)
adv_clock_sources.remove_clock_source(src)
fix_ccio_route(src)
print("""
assign {cin}_{site} = {csrc};
""".format(cin=cin, site=site, csrc=src))
for _, site in gen_sites('MMCME2_ADV'):
for cin in ('cin1', 'cin2', 'clkfbin'):
if random.random() > .2:
src = adv_clock_sources.get_random_source(site_to_cmt[site])
src_cmt = adv_clock_sources.source_to_cmt[src]
if 'IBUF' not in src and 'BUFR' not in src:
# Clocks from input pins do not require HCLK's, all other
# sources route from a global row clock.
src = check_hclk_src(src, src_cmt)
if src is None:
continue
if "IBUF" in src:
clock_sources.remove_clock_source(src)
adv_clock_sources.remove_clock_source(src)
fix_ccio_route(src)
print("""
assign {cin}_{site} = {csrc};
""".format(cin=cin, site=site, csrc=src))
print("endmodule")
def main():
"""
BUFHCE's can be driven from:
MMCME2_ADV
PLLE2_ADV
BUFGCTRL
Local INT connect
PS7 (Zynq)
"""
print('''
// SEED={}
module top();
'''.format(os.getenv('SEED')))
is_zynq = os.getenv('XRAY_DATABASE') == 'zynq7'
clock_sources = ClockSources()
site_to_cmt = dict(read_site_to_cmt())
if is_zynq:
pss_clocks = list(read_pss_clocks())
# To ensure that all left or right sources are used, sometimes only MMCM/PLL
# sources are allowed. The force of ODD/EVEN/BOTH further biases the
# clock sources to the left or right column inputs.
mmcm_pll_only = random.randint(0, 1)
mmcm_pll_dir = random.choice(('ODD', 'EVEN', 'BOTH', 'NONE'))
todos = read_todo()
if only_gclk_left(todos):
mmcm_pll_dir = 'NONE'
if not mmcm_pll_only:
if need_int_connections(todos):
for _ in range(10):
clock_sources.add_clock_source('one', 'ANY')
clock_sources.add_clock_source('zero', 'ANY')
print("""
wire zero = 0;
wire one = 1;""")
for loc, _, site in gen_sites('MMCME2_ADV'):
mmcm_clocks = [
'mmcm_clock_{site}_{idx}'.format(site=site, idx=idx)
for idx in range(13)
]
if check_allowed(mmcm_pll_dir, site_to_cmt[site]):
for clk in mmcm_clocks:
clock_sources.add_clock_source(clk, site_to_cmt[site], loc)
print("""
wire {c0}, {c1}, {c2}, {c3}, {c4}, {c5};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
MMCME2_ADV pll_{site} (
.CLKOUT0({c0}),
.CLKOUT0B({c1}),
.CLKOUT1({c2}),
.CLKOUT1B({c3}),
.CLKOUT2({c4}),
.CLKOUT2B({c5}),
.CLKOUT3({c6}),
.CLKOUT3B({c7}),
.CLKOUT4({c8}),
.CLKOUT5({c9}),
.CLKOUT6({c10}),
.CLKFBOUT({c11}),
.CLKFBOUTB({c12})
);
""".format(
site=site,
c0=mmcm_clocks[0],
c1=mmcm_clocks[1],
c2=mmcm_clocks[2],
c3=mmcm_clocks[3],
c4=mmcm_clocks[4],
c5=mmcm_clocks[5],
c6=mmcm_clocks[6],
c7=mmcm_clocks[7],
c8=mmcm_clocks[8],
c9=mmcm_clocks[9],
c10=mmcm_clocks[10],
c11=mmcm_clocks[11],
c12=mmcm_clocks[12],
))
for loc, _, site in gen_sites('PLLE2_ADV'):
pll_clocks = [
'pll_clock_{site}_{idx}'.format(site=site, idx=idx)
for idx in range(6)
]
if check_allowed(mmcm_pll_dir, site_to_cmt[site]):
for clk in pll_clocks:
clock_sources.add_clock_source(clk, site_to_cmt[site], loc)
print("""
wire {c0}, {c1}, {c2}, {c3}, {c4}, {c5};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
PLLE2_ADV pll_{site} (
.CLKOUT0({c0}),
.CLKOUT1({c1}),
.CLKOUT2({c2}),
.CLKOUT3({c3}),
.CLKOUT4({c4}),
.CLKOUT5({c5})
);
""".format(
site=site,
c0=pll_clocks[0],
c1=pll_clocks[1],
c2=pll_clocks[2],
c3=pll_clocks[3],
c4=pll_clocks[4],
c5=pll_clocks[5],
))
for loc, _, site in gen_sites('BUFR'):
clock_sources.add_bufg_clock_source('O_{site}'.format(site=site),
site_to_cmt[site], loc)
print("""
wire O_{site};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFR bufr_{site} (
.O(O_{site})
);""".format(site=site))
if is_zynq:
# FCLK clocks. Those are generated by the PS and go directly to one of
# the CLK_HROW tile.
clocks = [
"PSS_FCLKCLK0",
"PSS_FCLKCLK1",
"PSS_FCLKCLK2",
"PSS_FCLKCLK3",
]
loc, _, site = next(gen_sites('PS7'))
print("")
# Add clock sources and generate wires
for wire in clocks:
clock_info = [d for d in pss_clocks if d["pin"] == wire][0]
# CMT tile
cmt_tile = clock_info["tile"]
cmt_loc = get_cmt_loc(cmt_tile)
# Add only if the input wire is in the todo list
dsts = [k for k, v in todos.items() if clock_info["wire"] in v]
if len(dsts) > 0:
# Wire source clock region. The PS7 is always left of the
# CLK_HROW tile, but it does not matter here.
regions = clock_info["clock_regions"].split()
regions = sorted([(int(r[1]), int(r[3])) for r in regions])
# Add the clock source
cmt = "X{}Y{}".format(regions[0][0], regions[0][1])
clock_sources.add_clock_source(wire, cmt, cmt_loc)
print(" wire {};".format(wire))
print("""
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
PS7 ps7_{site} (
.FCLKCLK({{{fclk3}, {fclk2}, {fclk1}, {fclk0}}})
);
""".format(site=site,
fclk0=clocks[0],
fclk1=clocks[1],
fclk2=clocks[2],
fclk3=clocks[3]))
luts = LutMaker()
bufhs = StringIO()
bufgs = StringIO()
gclks = []
for _, _, site in sorted(gen_sites("BUFGCTRL"),
key=lambda x: BUFGCTRL_XY_FUN(x[2])):
wire_name = 'gclk_{}'.format(site)
gclks.append(wire_name)
include_source = True
if mmcm_pll_only:
include_source = False
elif only_gclk_left(todos):
include_source = need_gclk_connection(todos, site)
if include_source:
clock_sources.add_clock_source(wire_name, 'ANY')
print("""
wire {wire_name};
""".format(wire_name=wire_name))
print("""
wire I1_{site};
wire I0_{site};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFGCTRL bufg_{site} (
.O({wire_name}),
.S1({s1net}),
.S0({s0net}),
.IGNORE1({ignore1net}),
.IGNORE0({ignore0net}),
.I1(I1_{site}),
.I0(I0_{site}),
.CE1({ce1net}),
.CE0({ce0net})
);
""".format(
site=site,
wire_name=wire_name,
s1net=luts.get_next_output_net(),
s0net=luts.get_next_output_net(),
ignore1net=luts.get_next_output_net(),
ignore0net=luts.get_next_output_net(),
ce1net=luts.get_next_output_net(),
ce0net=luts.get_next_output_net(),
),
file=bufgs)
any_bufhce = False
for tile_name, sites in gen_bufhce_sites():
for site in sites:
if not bufhce_in_todo(todos, site):
continue
any_bufhce = True
print("""
wire I_{site};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFHCE buf_{site} (
.I(I_{site})
);
""".format(site=site, ),
file=bufhs)
if random.random() > .05:
wire_name = clock_sources.get_random_source(site_to_cmt[site])
if wire_name is None:
continue
print("""
assign I_{site} = {wire_name};""".format(
site=site,
wire_name=wire_name,
),
file=bufhs)
if not any_bufhce:
for tile_name, sites in gen_bufhce_sites():
for site in sites:
print("""
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFHCE #(
.INIT_OUT({INIT_OUT}),
.CE_TYPE({CE_TYPE}),
.IS_CE_INVERTED({IS_CE_INVERTED})
) buf_{site} (
.I({wire_name})
);
""".format(
INIT_OUT=random.randint(0, 1),
CE_TYPE=verilog.quote(random.choice(('SYNC', 'ASYNC'))),
IS_CE_INVERTED=random.randint(0, 1),
site=site,
wire_name=gclks[0],
))
break
break
for l in luts.create_wires_and_luts():
print(l)
print(bufhs.getvalue())
print(bufgs.getvalue())
used_only = random.random() < .25
for loc, tile_type, site in sorted(gen_sites("BUFGCTRL"),
key=lambda x: BUFGCTRL_XY_FUN(x[2])):
if random.randint(0, 1):
wire_name = clock_sources.get_bufg_source(loc, tile_type, site,
todos, 1, used_only)
if wire_name is not None:
print("""
assign I1_{site} = {wire_name};""".format(
site=site,
wire_name=wire_name,
))
if random.randint(0, 1):
wire_name = clock_sources.get_bufg_source(loc, tile_type, site,
todos, 0, used_only)
if wire_name is not None:
print("""
assign I0_{site} = {wire_name};""".format(
site=site,
wire_name=wire_name,
))
print("endmodule")
def main():
print('''
module top(
input wire in,
output wire out
);
assign out = in;
''')
luts = LutMaker()
primitives_list = list()
for tile_name, tile_type, site_name, site_type in gen_sites(
"GTPE2_CHANNEL"):
params_list = list()
params_dict = dict()
params_dict["tile_type"] = tile_type
params = dict()
params['site'] = site_name
verilog_attr = ""
verilog_attr = "#("
fuz_dir = os.getenv("FUZDIR", None)
assert fuz_dir
with open(os.path.join(fuz_dir, "attrs.json"), "r") as attrs_file:
attrs = json.load(attrs_file)
in_use = bool(random.randint(0, 9))
params["IN_USE"] = in_use
if in_use:
for param, param_info in attrs.items():
param_type = param_info["type"]
param_values = param_info["values"]
param_digits = param_info["digits"]
if param_type == INT:
value = random.choice(param_values)
value_str = value
elif param_type == BIN:
value = random.randint(0, param_values[0])
value_str = "{digits}'b{value:0{digits}b}".format(
value=value, digits=param_digits)
elif param_type in [BOOL, STR]:
value = random.choice(param_values)
value_str = verilog.quote(value)
params[param] = value
verilog_attr += """
.{}({}),""".format(param, value_str)
verilog_ports = ""
for param in [
"TXUSRCLK", "TXUSRCLK2", "TXPHDLYTSTCLK", "SIGVALIDCLK",
"RXUSRCLK", "RXUSRCLK2", "DRPCLK", "DMONITORCLK",
"CLKRSVD0", "CLKRSVD1"
]:
is_inverted = random.randint(0, 1)
params[param] = is_inverted
verilog_attr += """
.IS_{}_INVERTED({}),""".format(param, is_inverted)
verilog_ports += """
.{}({}),""".format(param, luts.get_next_output_net())
verilog_attr = verilog_attr.rstrip(",")
verilog_attr += "\n)"
print("(* KEEP, DONT_TOUCH, LOC=\"{}\" *)".format(site_name))
print("""GTPE2_CHANNEL {attrs} {site} (
{ports}
);
""".format(attrs=verilog_attr,
site=tile_type.lower(),
ports=verilog_ports.rstrip(",")))
params_list.append(params)
params_dict["params"] = params_list
primitives_list.append(params_dict)
for l in luts.create_wires_and_luts():
print(l)
print("endmodule")
with open('params.json', 'w') as f:
json.dump(primitives_list, f, indent=2)
def main():
"""
BUFG's can be driven from:
Interconnect
HROW cascade
"""
print('''
module top();
(* KEEP, DONT_TOUCH *)
LUT6 dummy();
''')
site_to_cmt = dict(read_site_to_cmt())
luts = LutMaker()
wires = StringIO()
bufgs = StringIO()
clock_sources = ClockSources()
db = Database(util.get_db_root(), util.get_part())
grid = db.grid()
def gen_sites(desired_site_type):
for tile_name in sorted(grid.tiles()):
loc = grid.loc_of_tilename(tile_name)
gridinfo = grid.gridinfo_at_loc(loc)
for site, site_type in gridinfo.sites.items():
if site_type == desired_site_type:
yield tile_name, site
for _, site in gen_sites('MMCME2_ADV'):
mmcm_clocks = [
'mmcm_clock_{site}_{idx}'.format(site=site, idx=idx)
for idx in range(13)
]
for clk in mmcm_clocks:
clock_sources.add_clock_source(clk, site_to_cmt[site])
print("""
wire {c0}, {c1}, {c2}, {c3}, {c4}, {c5};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
MMCME2_ADV pll_{site} (
.CLKOUT0({c0}),
.CLKOUT0B({c1}),
.CLKOUT1({c2}),
.CLKOUT1B({c3}),
.CLKOUT2({c4}),
.CLKOUT2B({c5}),
.CLKOUT3({c6}),
.CLKOUT3B({c7}),
.CLKOUT4({c8}),
.CLKOUT5({c9}),
.CLKOUT6({c10}),
.CLKFBOUT({c11}),
.CLKFBOUTB({c12})
);
""".format(
site=site,
c0=mmcm_clocks[0],
c1=mmcm_clocks[1],
c2=mmcm_clocks[2],
c3=mmcm_clocks[3],
c4=mmcm_clocks[4],
c5=mmcm_clocks[5],
c6=mmcm_clocks[6],
c7=mmcm_clocks[7],
c8=mmcm_clocks[8],
c9=mmcm_clocks[9],
c10=mmcm_clocks[10],
c11=mmcm_clocks[11],
c12=mmcm_clocks[12],
))
for _, site in sorted(gen_sites("BUFGCTRL"),
key=lambda x: BUFGCTRL_XY_FUN(x[1])):
print("""
wire O_{site};
wire S1_{site};
wire S0_{site};
wire IGNORE1_{site};
wire IGNORE0_{site};
wire I1_{site};
wire I0_{site};
wire CE1_{site};
wire CE0_{site};
""".format(site=site),
file=wires)
print("""
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFGCTRL bufg_{site} (
.O(O_{site}),
.S1(S1_{site}),
.S0(S0_{site}),
.IGNORE1(IGNORE1_{site}),
.IGNORE0(IGNORE0_{site}),
.I1(I1_{site}),
.I0(I0_{site}),
.CE1(CE1_{site}),
.CE0(CE0_{site})
);
""".format(site=site),
file=bufgs)
""" BUFG clock sources:
2 from interconnect
Output of BUFG +/- 1
Cascade in (e.g. PLL, MMCM)
"""
CLOCK_CHOICES = (
'LUT',
'BUFG_+1',
'BUFG_-1',
'CASCADE',
)
def find_bufg_cmt(tile):
if '_BOT_' in tile:
inc = 1
else:
inc = -1
loc = grid.loc_of_tilename(tile)
offset = 1
while True:
gridinfo = grid.gridinfo_at_loc(
(loc.grid_x, loc.grid_y + offset * inc))
if gridinfo.tile_type.startswith('CLK_HROW_'):
return site_to_cmt[list(gridinfo.sites.keys())[0]]
offset += 1
def get_clock_net(tile, site, source_type):
if source_type == 'LUT':
return luts.get_next_output_net()
elif source_type == 'BUFG_+1':
x, y = BUFGCTRL_XY_FUN(site)
target_y = y + 1
max_y = ((y // 16) + 1) * 16
if target_y >= max_y:
target_y -= 16
return 'O_BUFGCTRL_X{x}Y{y}'.format(x=x, y=target_y)
elif source_type == 'BUFG_-1':
x, y = BUFGCTRL_XY_FUN(site)
target_y = y - 1
min_y = (y // 16) * 16
if target_y < min_y:
target_y += 16
return 'O_BUFGCTRL_X{x}Y{y}'.format(x=x, y=target_y)
elif source_type == 'CASCADE':
cmt = find_bufg_cmt(tile)
return clock_sources.get_random_source(cmt)
else:
assert False, source_type
for tile, site in sorted(gen_sites("BUFGCTRL"),
key=lambda x: BUFGCTRL_XY_FUN(x[1])):
if random.randint(0, 1):
print("""
assign I0_{site} = {i0_net};""".format(site=site,
i0_net=get_clock_net(
tile, site,
random.choice(CLOCK_CHOICES))),
file=bufgs)
if random.randint(0, 1):
print("""
assign I1_{site} = {i1_net};""".format(site=site,
i1_net=get_clock_net(
tile, site,
random.choice(CLOCK_CHOICES))),
file=bufgs)
print("""
assign S0_{site} = {s0_net};
assign S1_{site} = {s1_net};
assign IGNORE0_{site} = {ignore0_net};
assign IGNORE1_{site} = {ignore1_net};
assign CE0_{site} = {ce0_net};
assign CE1_{site} = {ce1_net};
""".format(
site=site,
s0_net=luts.get_next_output_net(),
s1_net=luts.get_next_output_net(),
ignore0_net=luts.get_next_output_net(),
ignore1_net=luts.get_next_output_net(),
ce0_net=luts.get_next_output_net(),
ce1_net=luts.get_next_output_net(),
),
file=bufgs)
for l in luts.create_wires_and_luts():
print(l)
print(wires.getvalue())
print(bufgs.getvalue())
itr = iter(gen_sites('BUFHCE'))
for tile, site in sorted(gen_sites("BUFGCTRL"),
key=lambda x: BUFGCTRL_XY_FUN(x[1])):
if random.randint(0, 1):
_, bufhce_site = next(itr)
print("""
(* KEEP, DONT_TOUCH, LOC = "{bufhce_site}" *)
BUFHCE bufhce_{bufhce_site} (
.I(O_{site})
);""".format(
site=site,
bufhce_site=bufhce_site,
))
print("endmodule")
def main():
"""
BUFHCE's can be driven from:
MMCME2_ADV
PLLE2_ADV
BUFGCTRL
Local INT connect
"""
print('''
module top();
''')
site_to_cmt = dict(read_site_to_cmt())
clock_sources = ClockSources()
# To ensure that all left or right sources are used, sometimes only MMCM/PLL
# sources are allowed. The force of ODD/EVEN/BOTH further biases the
# clock sources to the left or right column inputs.
mmcm_pll_only = random.randint(0, 1)
mmcm_pll_dir = random.choice(('ODD', 'EVEN', 'BOTH', 'NONE'))
todos = read_todo()
if only_gclk_left(todos):
mmcm_pll_dir = 'NONE'
if not mmcm_pll_only:
if need_int_connections(todos):
for _ in range(10):
clock_sources.add_clock_source('one', 'ANY')
clock_sources.add_clock_source('zero', 'ANY')
print("""
wire zero = 0;
wire one = 1;""")
for loc, _, site in gen_sites('MMCME2_ADV'):
mmcm_clocks = [
'mmcm_clock_{site}_{idx}'.format(site=site, idx=idx)
for idx in range(13)
]
if check_allowed(mmcm_pll_dir, site_to_cmt[site]):
for clk in mmcm_clocks:
clock_sources.add_clock_source(clk, site_to_cmt[site], loc)
print("""
wire {c0}, {c1}, {c2}, {c3}, {c4}, {c5};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
MMCME2_ADV pll_{site} (
.CLKOUT0({c0}),
.CLKOUT0B({c1}),
.CLKOUT1({c2}),
.CLKOUT1B({c3}),
.CLKOUT2({c4}),
.CLKOUT2B({c5}),
.CLKOUT3({c6}),
.CLKOUT3B({c7}),
.CLKOUT4({c8}),
.CLKOUT5({c9}),
.CLKOUT6({c10}),
.CLKFBOUT({c11}),
.CLKFBOUTB({c12})
);
""".format(
site=site,
c0=mmcm_clocks[0],
c1=mmcm_clocks[1],
c2=mmcm_clocks[2],
c3=mmcm_clocks[3],
c4=mmcm_clocks[4],
c5=mmcm_clocks[5],
c6=mmcm_clocks[6],
c7=mmcm_clocks[7],
c8=mmcm_clocks[8],
c9=mmcm_clocks[9],
c10=mmcm_clocks[10],
c11=mmcm_clocks[11],
c12=mmcm_clocks[12],
))
for loc, _, site in gen_sites('PLLE2_ADV'):
pll_clocks = [
'pll_clock_{site}_{idx}'.format(site=site, idx=idx)
for idx in range(6)
]
if check_allowed(mmcm_pll_dir, site_to_cmt[site]):
for clk in pll_clocks:
clock_sources.add_clock_source(clk, site_to_cmt[site], loc)
print("""
wire {c0}, {c1}, {c2}, {c3}, {c4}, {c5};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
PLLE2_ADV pll_{site} (
.CLKOUT0({c0}),
.CLKOUT1({c1}),
.CLKOUT2({c2}),
.CLKOUT3({c3}),
.CLKOUT4({c4}),
.CLKOUT5({c5})
);
""".format(
site=site,
c0=pll_clocks[0],
c1=pll_clocks[1],
c2=pll_clocks[2],
c3=pll_clocks[3],
c4=pll_clocks[4],
c5=pll_clocks[5],
))
for loc, _, site in gen_sites('BUFR'):
clock_sources.add_bufg_clock_source('O_{site}'.format(site=site),
site_to_cmt[site], loc)
print("""
wire O_{site};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFR bufr_{site} (
.O(O_{site})
);""".format(site=site))
luts = LutMaker()
bufhs = StringIO()
bufgs = StringIO()
gclks = []
for _, _, site in sorted(gen_sites("BUFGCTRL"),
key=lambda x: BUFGCTRL_XY_FUN(x[2])):
wire_name = 'gclk_{}'.format(site)
gclks.append(wire_name)
include_source = True
if mmcm_pll_only:
include_source = False
elif only_gclk_left(todos):
include_source = need_gclk_connection(todos, site)
if include_source:
clock_sources.add_clock_source(wire_name, 'ANY')
print("""
wire {wire_name};
""".format(wire_name=wire_name))
print("""
wire I1_{site};
wire I0_{site};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFGCTRL bufg_{site} (
.O({wire_name}),
.S1({s1net}),
.S0({s0net}),
.IGNORE1({ignore1net}),
.IGNORE0({ignore0net}),
.I1(I1_{site}),
.I0(I0_{site}),
.CE1({ce1net}),
.CE0({ce0net})
);
""".format(
site=site,
wire_name=wire_name,
s1net=luts.get_next_output_net(),
s0net=luts.get_next_output_net(),
ignore1net=luts.get_next_output_net(),
ignore0net=luts.get_next_output_net(),
ce1net=luts.get_next_output_net(),
ce0net=luts.get_next_output_net(),
),
file=bufgs)
any_bufhce = False
for tile_name, sites in gen_bufhce_sites():
for site in sites:
if not bufhce_in_todo(todos, site):
continue
any_bufhce = True
print("""
wire I_{site};
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFHCE buf_{site} (
.I(I_{site})
);
""".format(site=site, ),
file=bufhs)
if random.random() > .05:
wire_name = clock_sources.get_random_source(site_to_cmt[site])
if wire_name is None:
continue
print("""
assign I_{site} = {wire_name};""".format(
site=site,
wire_name=wire_name,
),
file=bufhs)
if not any_bufhce:
for tile_name, sites in gen_bufhce_sites():
for site in sites:
print("""
(* KEEP, DONT_TOUCH, LOC = "{site}" *)
BUFHCE #(
.INIT_OUT({INIT_OUT}),
.CE_TYPE({CE_TYPE}),
.IS_CE_INVERTED({IS_CE_INVERTED})
) buf_{site} (
.I({wire_name})
);
""".format(
INIT_OUT=random.randint(0, 1),
CE_TYPE=verilog.quote(random.choice(('SYNC', 'ASYNC'))),
IS_CE_INVERTED=random.randint(0, 1),
site=site,
wire_name=gclks[0],
))
break
break
for l in luts.create_wires_and_luts():
print(l)
print(bufhs.getvalue())
print(bufgs.getvalue())
used_only = random.random() < .25
for loc, tile_type, site in sorted(gen_sites("BUFGCTRL"),
key=lambda x: BUFGCTRL_XY_FUN(x[2])):
if random.randint(0, 1):
wire_name = clock_sources.get_bufg_source(loc, tile_type, site,
todos, 1, used_only)
if wire_name is not None:
print("""
assign I1_{site} = {wire_name};""".format(
site=site,
wire_name=wire_name,
))
if random.randint(0, 1):
wire_name = clock_sources.get_bufg_source(loc, tile_type, site,
todos, 0, used_only)
if wire_name is not None:
print("""
assign I0_{site} = {wire_name};""".format(
site=site,
wire_name=wire_name,
))
print("endmodule")