def _executeAlgorithm(alg):
ok, message = alg.canExecute()
if not ok:
dlg = MessageDialog()
dlg.setTitle(Processing.tr('Missing dependency'))
dlg.setMessage(
Processing.tr('<h3>Missing dependency. This algorithm cannot '
'be run :-( </h3>\n{0}').format(message))
dlg.exec_()
return
if (alg.countVisibleParameters()) > 0:
dlg = alg.createCustomParametersWidget(None)
if not dlg:
dlg = AlgorithmDialog(alg)
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
else:
feedback = MessageBarProgress()
context = dataobjects.createContext(feedback)
parameters = {}
ret, results = execute(alg, parameters, context, feedback)
handleAlgorithmResults(alg, context, feedback)
feedback.close()
def executeAlgorithm(self):
alg = self.algorithmTree.selectedAlgorithm()
if alg is not None:
ok, message = alg.canExecute()
if not ok:
dlg = MessageDialog()
dlg.setTitle(self.tr('Error executing algorithm'))
dlg.setMessage(
self.tr('<h3>This algorithm cannot '
'be run :-( </h3>\n{0}').format(message))
dlg.exec_()
return
if alg.countVisibleParameters() > 0:
dlg = alg.createCustomParametersWidget(self)
if not dlg:
dlg = AlgorithmDialog(alg)
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
else:
feedback = MessageBarProgress()
context = dataobjects.createContext(feedback)
parameters = {}
ret, results = execute(alg, parameters, context, feedback)
handleAlgorithmResults(alg, context, feedback)
feedback.close()
def _executeAlgorithm(alg):
message = alg.checkBeforeOpeningParametersDialog()
if message:
dlg = MessageDialog()
dlg.setTitle(Processing.tr('Missing dependency'))
dlg.setMessage(
Processing.tr('<h3>Missing dependency. This algorithm cannot '
'be run :-( </h3>\n{0}').format(message))
dlg.exec_()
return
alg = alg.getCopy()
if (alg.getVisibleParametersCount() + alg.getVisibleOutputsCount()) > 0:
dlg = alg.getCustomParametersDialog()
if not dlg:
dlg = AlgorithmDialog(alg)
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
else:
feedback = MessageBarProgress()
execute(alg, feedback)
handleAlgorithmResults(alg, feedback)
feedback.close()
def executeAlgorithm(self):
item = self.algorithmTree.currentItem()
if isinstance(item, TreeAlgorithmItem):
alg = QgsApplication.processingRegistry().createAlgorithmById(item.alg.id())
if not alg:
return
ok, message = alg.canExecute()
if not ok:
dlg = MessageDialog()
dlg.setTitle(self.tr('Error executing algorithm'))
dlg.setMessage(
self.tr('<h3>This algorithm cannot '
'be run :-( </h3>\n{0}').format(message))
dlg.exec_()
return
if alg.countVisibleParameters() > 0:
dlg = alg.createCustomParametersWidget(self)
if not dlg:
dlg = AlgorithmDialog(alg)
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
if dlg.executed:
showRecent = ProcessingConfig.getSetting(
ProcessingConfig.SHOW_RECENT_ALGORITHMS)
if showRecent:
self.addRecentAlgorithms(True)
# have to manually delete the dialog - otherwise it's owned by the
# iface mainWindow and never deleted
dlg.deleteLater()
else:
feedback = MessageBarProgress()
context = dataobjects.createContext(feedback)
parameters = {}
ret, results = execute(alg, parameters, context, feedback)
handleAlgorithmResults(alg, context, feedback)
feedback.close()
if isinstance(item, TreeActionItem):
action = item.action
action.setData(self)
action.execute()
def executeAlgorithm(self):
alg = self.algorithmTree.selectedAlgorithm().create() if self.algorithmTree.selectedAlgorithm() is not None else None
if alg is not None:
ok, message = alg.canExecute()
if not ok:
dlg = MessageDialog()
dlg.setTitle(self.tr('Error executing algorithm'))
dlg.setMessage(
self.tr('<h3>This algorithm cannot '
'be run :-( </h3>\n{0}').format(message))
dlg.exec_()
return
if self.in_place_mode and not [d for d in alg.parameterDefinitions() if d.name() not in ('INPUT', 'OUTPUT')]:
parameters = {}
feedback = MessageBarProgress(algname=alg.displayName())
ok, results = execute_in_place(alg, parameters, feedback=feedback)
if ok:
iface.messageBar().pushSuccess('', self.tr('{} complete').format(alg.displayName()))
feedback.close()
# MessageBarProgress handles errors
return
if alg.countVisibleParameters() > 0:
dlg = alg.createCustomParametersWidget(self)
if not dlg:
dlg = AlgorithmDialog(alg, self.in_place_mode, iface.mainWindow())
dlg.setAttribute(Qt.WA_DeleteOnClose)
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
else:
feedback = MessageBarProgress(algname=alg.displayName())
context = dataobjects.createContext(feedback)
parameters = {}
ret, results = execute(alg, parameters, context, feedback)
handleAlgorithmResults(alg, context, feedback)
feedback.close()
def _executeAlgorithm(alg_id):
alg = QgsApplication.processingRegistry().createAlgorithmById(alg_id)
if alg is None:
dlg = MessageDialog()
dlg.setTitle(Processing.tr('Missing Algorithm'))
dlg.setMessage(
Processing.
tr('The algorithm "{}" is no longer available. (Perhaps a plugin was uninstalled?)'
).format(alg_id))
dlg.exec_()
return
ok, message = alg.canExecute()
if not ok:
dlg = MessageDialog()
dlg.setTitle(Processing.tr('Missing Dependency'))
dlg.setMessage(
Processing.tr('<h3>Missing dependency. This algorithm cannot '
'be run :-( </h3>\n{0}').format(message))
dlg.exec_()
return
if (alg.countVisibleParameters()) > 0:
dlg = alg.createCustomParametersWidget(parent=iface.mainWindow())
if not dlg:
dlg = AlgorithmDialog(alg, parent=iface.mainWindow())
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
else:
feedback = MessageBarProgress()
context = dataobjects.createContext(feedback)
parameters = {}
ret, results = execute(alg, parameters, context, feedback)
handleAlgorithmResults(alg, context, feedback)
feedback.close()
def executeAlgorithm(self):
item = self.algorithmTree.currentItem()
if isinstance(item, TreeAlgorithmItem):
alg = Processing.getAlgorithm(item.alg.commandLineName())
message = alg.checkBeforeOpeningParametersDialog()
if message:
dlg = MessageDialog()
dlg.setTitle(self.tr('Error executing algorithm'))
dlg.setMessage(
self.tr('<h3>This algorithm cannot '
'be run :-( </h3>\n%s') % message)
dlg.exec_()
return
alg = alg.getCopy()
if (alg.getVisibleParametersCount() +
alg.getVisibleOutputsCount()) > 0:
dlg = alg.getCustomParametersDialog()
if not dlg:
dlg = AlgorithmDialog(alg)
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
if dlg.executed:
showRecent = ProcessingConfig.getSetting(
ProcessingConfig.SHOW_RECENT_ALGORITHMS)
if showRecent:
self.addRecentAlgorithms(True)
else:
feedback = MessageBarProgress()
runalg(alg, feedback)
handleAlgorithmResults(alg, feedback)
feedback.close()
if isinstance(item, TreeActionItem):
action = item.action
action.setData(self)
action.execute()
def executeAlgorithm(self):
alg = self.algorithmTree.selectedAlgorithm()
if alg is not None:
ok, message = alg.canExecute()
if not ok:
dlg = MessageDialog()
dlg.setTitle(self.tr('Error executing algorithm'))
dlg.setMessage(
self.tr('<h3>This algorithm cannot '
'be run :-( </h3>\n{0}').format(message))
dlg.exec_()
return
if self.in_place_mode and not [
d for d in alg.parameterDefinitions()
if d.name() not in ('INPUT', 'OUTPUT')
]:
parameters = {}
execute_in_place(alg, parameters)
return
if alg.countVisibleParameters() > 0:
dlg = alg.createCustomParametersWidget(self)
if not dlg:
dlg = AlgorithmDialog(alg, self.in_place_mode)
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
else:
feedback = MessageBarProgress()
context = dataobjects.createContext(feedback)
parameters = {}
ret, results = execute(alg, parameters, context, feedback)
handleAlgorithmResults(alg, context, feedback)
feedback.close()
def executeAlgorithm(self):
item = self.algorithmTree.currentItem()
if isinstance(item, TreeAlgorithmItem):
alg = Processing.getAlgorithm(item.alg.commandLineName())
message = alg.checkBeforeOpeningParametersDialog()
if message:
dlg = MessageDialog()
dlg.setTitle(self.tr('Error executing algorithm'))
dlg.setMessage(
self.tr('<h3>This algorithm cannot '
'be run :-( </h3>\n%s') % message)
dlg.exec_()
return
alg = alg.getCopy()
if (alg.getVisibleParametersCount() + alg.getVisibleOutputsCount()) > 0:
dlg = alg.getCustomParametersDialog()
if not dlg:
dlg = AlgorithmDialog(alg)
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
if dlg.executed:
showRecent = ProcessingConfig.getSetting(
ProcessingConfig.SHOW_RECENT_ALGORITHMS)
if showRecent:
self.addRecentAlgorithms(True)
else:
progress = MessageBarProgress()
runalg(alg, progress)
handleAlgorithmResults(alg, progress)
progress.close()
if isinstance(item, TreeActionItem):
action = item.action
action.setData(self)
action.execute()
def _executeAlgorithm(alg_id):
alg = QgsApplication.processingRegistry().createAlgorithmById(alg_id)
if alg is None:
dlg = MessageDialog()
dlg.setTitle(Processing.tr('Missing Algorithm'))
dlg.setMessage(
Processing.tr('The algorithm "{}" is no longer available. (Perhaps a plugin was uninstalled?)').format(alg_id))
dlg.exec_()
return
ok, message = alg.canExecute()
if not ok:
dlg = MessageDialog()
dlg.setTitle(Processing.tr('Missing Dependency'))
dlg.setMessage(
Processing.tr('<h3>Missing dependency. This algorithm cannot '
'be run :-( </h3>\n{0}').format(message))
dlg.exec_()
return
if (alg.countVisibleParameters()) > 0:
dlg = alg.createCustomParametersWidget(parent=iface.mainWindow())
if not dlg:
dlg = AlgorithmDialog(alg, parent=iface.mainWindow())
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
else:
feedback = MessageBarProgress()
context = dataobjects.createContext(feedback)
parameters = {}
ret, results = execute(alg, parameters, context, feedback)
handleAlgorithmResults(alg, context, feedback)
feedback.close()
def executeAlgorithm(self):
item = self.algorithmTree.currentItem()
if isinstance(item, TreeAlgorithmItem):
alg = QgsApplication.processingRegistry().createAlgorithmById(
item.alg.id())
if not alg:
return
ok, message = alg.canExecute()
if not ok:
dlg = MessageDialog()
dlg.setTitle(self.tr('Error executing algorithm'))
dlg.setMessage(
self.tr('<h3>This algorithm cannot '
'be run :-( </h3>\n{0}').format(message))
dlg.exec_()
return
if alg.countVisibleParameters() > 0:
dlg = alg.createCustomParametersWidget(self)
if not dlg:
dlg = AlgorithmDialog(alg)
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
else:
feedback = MessageBarProgress()
context = dataobjects.createContext(feedback)
parameters = {}
ret, results = execute(alg, parameters, context, feedback)
handleAlgorithmResults(alg, context, feedback)
feedback.close()
def _executeAlgorithm(alg):
message = alg.checkBeforeOpeningParametersDialog()
if message:
dlg = MessageDialog()
dlg.setTitle(Processing.tr('Missing dependency'))
dlg.setMessage(
Processing.tr('<h3>Missing dependency. This algorithm cannot '
'be run :-( </h3>\n{0}').format(message))
dlg.exec_()
return
# hack - remove when getCopy is removed
provider = alg.provider()
alg = alg.getCopy()
#hack pt 2
alg.setProvider(provider)
context = dataobjects.createContext()
if (alg.getVisibleParametersCount() + alg.getVisibleOutputsCount()) > 0:
dlg = alg.getCustomParametersDialog()
if not dlg:
dlg = AlgorithmDialog(alg)
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
else:
feedback = MessageBarProgress()
execute(alg, context, feedback)
handleAlgorithmResults(alg, context, feedback)
feedback.close()
def triggerResult(self, result):
config = {'IN_PLACE': True}
alg = QgsApplication.processingRegistry().createAlgorithmById(result.userData, config)
if alg:
ok, message = alg.canExecute()
if not ok:
dlg = MessageDialog()
dlg.setTitle(self.tr('Missing dependency'))
dlg.setMessage(message)
dlg.exec_()
return
in_place_input_parameter_name = 'INPUT'
if hasattr(alg, 'inputParameterName'):
in_place_input_parameter_name = alg.inputParameterName()
if [d for d in alg.parameterDefinitions() if
d.name() not in (in_place_input_parameter_name, 'OUTPUT')]:
dlg = alg.createCustomParametersWidget(parent=iface.mainWindow())
if not dlg:
dlg = AlgorithmDialog(alg, True, parent=iface.mainWindow())
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
else:
feedback = MessageBarProgress(algname=alg.displayName())
parameters = {}
execute_in_place(alg, parameters, feedback=feedback)
feedback.close()
def runAlgorithm(algOrName, onFinish, *args, **kwargs):
if isinstance(algOrName, GeoAlgorithm):
alg = algOrName
else:
alg = QgsApplication.processingRegistry().algorithmById(algOrName)
if alg is None:
# fix_print_with_import
print('Error: Algorithm not found\n')
QgsMessageLog.logMessage(Processing.tr('Error: Algorithm {0} not found\n').format(algOrName),
Processing.tr("Processing"))
return
# hack - remove when getCopy is removed
provider = alg.provider()
alg = alg.getCopy()
#hack pt2
alg.setProvider(provider)
if len(args) == 1 and isinstance(args[0], dict):
# Set params by name and try to run the alg even if not all parameter values are provided,
# by using the default values instead.
setParams = []
for (name, value) in list(args[0].items()):
param = alg.getParameterFromName(name)
if param and param.setValue(value):
setParams.append(name)
continue
output = alg.getOutputFromName(name)
if output and output.setValue(value):
continue
# fix_print_with_import
print('Error: Wrong parameter value %s for parameter %s.' % (value, name))
QgsMessageLog.logMessage(
Processing.tr('Error: Wrong parameter value {0} for parameter {1}.').format(value, name),
Processing.tr("Processing"))
QgsMessageLog.logMessage(Processing.tr('Error in {0}. Wrong parameter value {1} for parameter {2}.').format(
alg.name(), value, name
), Processing.tr("Processing"),
QgsMessageLog.CRITICAL
)
return
# fill any missing parameters with default values if allowed
for param in alg.parameters:
if param.name not in setParams:
if not param.setDefaultValue():
# fix_print_with_import
print('Error: Missing parameter value for parameter %s.' % param.name)
QgsMessageLog.logMessage(
Processing.tr('Error: Missing parameter value for parameter {0}.').format(param.name),
Processing.tr("Processing"))
return
else:
if len(args) != alg.getVisibleParametersCount() + alg.getVisibleOutputsCount():
# fix_print_with_import
print('Error: Wrong number of parameters')
QgsMessageLog.logMessage(Processing.tr('Error: Wrong number of parameters'),
Processing.tr("Processing"))
processing.algorithmHelp(algOrName)
return
i = 0
for param in alg.parameters:
if not param.hidden:
if not param.setValue(args[i]):
# fix_print_with_import
print('Error: Wrong parameter value: ' + str(args[i]))
QgsMessageLog.logMessage(Processing.tr('Error: Wrong parameter value: ') + str(args[i]),
Processing.tr("Processing"))
return
i = i + 1
for output in alg.outputs:
if not output.hidden:
if not output.setValue(args[i]):
# fix_print_with_import
print('Error: Wrong output value: ' + str(args[i]))
QgsMessageLog.logMessage(Processing.tr('Error: Wrong output value: ') + str(args[i]),
Processing.tr("Processing"))
return
i = i + 1
context = None
if kwargs is not None and 'context' in list(kwargs.keys()):
context = kwargs["context"]
else:
context = dataobjects.createContext()
msg = alg._checkParameterValuesBeforeExecuting(context)
if msg:
# fix_print_with_import
print('Unable to execute algorithm\n' + str(msg))
QgsMessageLog.logMessage(Processing.tr('Unable to execute algorithm\n{0}').format(msg),
Processing.tr("Processing"))
return
if not alg.checkInputCRS(context):
print('Warning: Not all input layers use the same CRS.\n' +
'This can cause unexpected results.')
QgsMessageLog.logMessage(
Processing.tr('Warning: Not all input layers use the same CRS.\nThis can cause unexpected results.'),
Processing.tr("Processing"))
# Don't set the wait cursor twice, because then when you
# restore it, it will still be a wait cursor.
overrideCursor = False
if iface is not None:
cursor = QApplication.overrideCursor()
if cursor is None or cursor == 0:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
overrideCursor = True
elif cursor.shape() != Qt.WaitCursor:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
overrideCursor = True
feedback = None
if kwargs is not None and "feedback" in list(kwargs.keys()):
feedback = kwargs["feedback"]
elif iface is not None:
feedback = MessageBarProgress(alg.displayName())
ret = execute(alg, context, feedback)
if ret:
if onFinish is not None:
onFinish(alg, context, feedback)
else:
QgsMessageLog.logMessage(Processing.tr("There were errors executing the algorithm."),
Processing.tr("Processing"))
if overrideCursor:
QApplication.restoreOverrideCursor()
if isinstance(feedback, MessageBarProgress):
feedback.close()
return alg
def runAlgorithm(algOrName, onFinish, *args):
if isinstance(algOrName, GeoAlgorithm):
alg = algOrName
else:
alg = Processing.getAlgorithm(algOrName)
if alg is None:
print 'Error: Algorithm not found\n'
return
if len(args) != alg.getVisibleParametersCount() \
+ alg.getVisibleOutputsCount():
print 'Error: Wrong number of parameters'
processing.alghelp(algOrName)
return
alg = alg.getCopy()
if isinstance(args, dict):
# Set params by name
for (name, value) in args.items():
if alg.getParameterFromName(name).setValue(value):
continue
if alg.getOutputFromName(name).setValue(value):
continue
print 'Error: Wrong parameter value %s for parameter %s.' \
% (value, name)
return
else:
i = 0
for param in alg.parameters:
if not param.hidden:
if not param.setValue(args[i]):
print 'Error: Wrong parameter value: ' \
+ unicode(args[i])
return
i = i + 1
for output in alg.outputs:
if not output.hidden:
if not output.setValue(args[i]):
print 'Error: Wrong output value: ' + unicode(args[i])
return
i = i + 1
msg = alg.checkParameterValuesBeforeExecuting()
if msg:
print 'Unable to execute algorithm\n' + msg
return
if not alg.checkInputCRS():
print 'Warning: Not all input layers use the same CRS.\n' \
+ 'This can cause unexpected results.'
ProcessingLog.addToLog(ProcessingLog.LOG_ALGORITHM, alg.getAsCommand())
# Don't set the wait cursor twice, because then when you
# restore it, it will still be a wait cursor.
cursor = QApplication.overrideCursor()
if cursor is None or cursor == 0:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
elif cursor.shape() != Qt.WaitCursor:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
progress = MessageBarProgress()
ret = UnthreadedAlgorithmExecutor.runalg(alg, progress)
if onFinish is not None and ret:
onFinish(alg, progress)
QApplication.restoreOverrideCursor()
progress.close()
return alg
def runAlgorithm(algOrName, parameters, onFinish=None, feedback=None, context=None):
if isinstance(algOrName, QgsProcessingAlgorithm):
alg = algOrName
else:
alg = QgsApplication.processingRegistry().createAlgorithmById(algOrName)
if feedback is None:
feedback = MessageBarProgress(alg.displayName() if alg else Processing.tr('Processing'))
if alg is None:
# fix_print_with_import
print('Error: Algorithm not found\n')
msg = Processing.tr('Error: Algorithm {0} not found\n').format(algOrName)
feedback.reportError(msg)
raise QgsProcessingException(msg)
# check for any mandatory parameters which were not specified
for param in alg.parameterDefinitions():
if param.name() not in parameters:
if not param.flags() & QgsProcessingParameterDefinition.FlagOptional:
# fix_print_with_import
msg = Processing.tr('Error: Missing parameter value for parameter {0}.').format(param.name())
print('Error: Missing parameter value for parameter %s.' % param.name())
feedback.reportError(msg)
raise QgsProcessingException(msg)
if context is None:
context = dataobjects.createContext(feedback)
ok, msg = alg.checkParameterValues(parameters, context)
if not ok:
# fix_print_with_import
print('Unable to execute algorithm\n' + str(msg))
msg = Processing.tr('Unable to execute algorithm\n{0}').format(msg)
feedback.reportError(msg)
raise QgsProcessingException(msg)
if not alg.validateInputCrs(parameters, context):
print('Warning: Not all input layers use the same CRS.\n' +
'This can cause unexpected results.')
feedback.pushInfo(
Processing.tr('Warning: Not all input layers use the same CRS.\nThis can cause unexpected results.'))
ret, results = execute(alg, parameters, context, feedback)
if ret:
feedback.pushInfo(
Processing.tr('Results: {}').format(results))
if onFinish is not None:
onFinish(alg, context, feedback)
else:
# auto convert layer references in results to map layers
for out in alg.outputDefinitions():
if isinstance(out, (QgsProcessingOutputVectorLayer, QgsProcessingOutputRasterLayer, QgsProcessingOutputMapLayer)):
result = results[out.name()]
if not isinstance(result, QgsMapLayer):
layer = context.takeResultLayer(result) # transfer layer ownership out of context
if layer:
results[out.name()] = layer # replace layer string ref with actual layer (+ownership)
else:
msg = Processing.tr("There were errors executing the algorithm.")
feedback.reportError(msg)
raise QgsProcessingException(msg)
if isinstance(feedback, MessageBarProgress):
feedback.close()
return results
def executeAlgorithm(self):
config = {}
if self.in_place_mode:
config['IN_PLACE'] = True
alg = self.algorithmTree.selectedAlgorithm().create(
config) if self.algorithmTree.selectedAlgorithm(
) is not None else None
if alg is not None:
ok, message = alg.canExecute()
if not ok:
dlg = MessageDialog()
dlg.setTitle(self.tr('Error executing algorithm'))
dlg.setMessage(
self.tr('<h3>This algorithm cannot '
'be run :-( </h3>\n{0}').format(message))
dlg.exec_()
return
if self.in_place_mode and not [
d for d in alg.parameterDefinitions()
if d.name() not in ('INPUT', 'OUTPUT')
]:
parameters = {}
feedback = MessageBarProgress(algname=alg.displayName())
ok, results = execute_in_place(alg,
parameters,
feedback=feedback)
if ok:
iface.messageBar().pushSuccess(
'',
self.tr(
'{algname} completed. %n feature(s) processed.',
n=results['__count']).format(
algname=alg.displayName()))
feedback.close()
# MessageBarProgress handles errors
return
if alg.countVisibleParameters() > 0:
dlg = alg.createCustomParametersWidget(self)
if not dlg:
dlg = AlgorithmDialog(alg, self.in_place_mode,
iface.mainWindow())
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except:
pass
canvas.setMapTool(prevMapTool)
else:
feedback = MessageBarProgress(algname=alg.displayName())
context = dataobjects.createContext(feedback)
parameters = {}
ret, results = execute(alg, parameters, context, feedback)
handleAlgorithmResults(alg, context, feedback)
feedback.close()
def runAlgorithm(algOrName, onFinish, *args):
if isinstance(algOrName, GeoAlgorithm):
alg = algOrName
else:
alg = Processing.getAlgorithm(algOrName)
if alg is None:
print 'Error: Algorithm not found\n'
return
alg = alg.getCopy()
if len(args) == 1 and isinstance(args[0], dict):
# Set params by name and try to run the alg even if not all parameter values are provided,
# by using the default values instead.
setParams = []
for (name, value) in args[0].items():
param = alg.getParameterFromName(name)
if param and param.setValue(value):
setParams.append(name)
continue
output = alg.getOutputFromName(name)
if output and output.setValue(value):
continue
print 'Error: Wrong parameter value %s for parameter %s.' \
% (value, name)
ProcessingLog.addToLog(ProcessingLog.LOG_ERROR,
Processing.tr('Error in %s. Wrong parameter value %s for parameter %s.') \
% (alg.name, value, name))
return
# fill any missing parameters with default values if allowed
for param in alg.parameters:
if param.name not in setParams:
if not param.setValue(None):
print(
'Error: Missing parameter value for parameter %s.'
% (param.name))
ProcessingLog.addToLog(ProcessingLog.LOG_ERROR,
Processing.tr('Error in %s. Missing parameter value for parameter %s.') \
% (alg.name, param.name))
return
else:
if len(args) != alg.getVisibleParametersCount() \
+ alg.getVisibleOutputsCount():
print 'Error: Wrong number of parameters'
processing.alghelp(algOrName)
return
i = 0
for param in alg.parameters:
if not param.hidden:
if not param.setValue(args[i]):
print 'Error: Wrong parameter value: ' \
+ unicode(args[i])
return
i = i + 1
for output in alg.outputs:
if not output.hidden:
if not output.setValue(args[i]):
print 'Error: Wrong output value: ' + unicode(args[i])
return
i = i + 1
msg = alg.checkParameterValuesBeforeExecuting()
if msg:
print 'Unable to execute algorithm\n' + msg
return
if not alg.checkInputCRS():
print 'Warning: Not all input layers use the same CRS.\n' \
+ 'This can cause unexpected results.'
if iface is not None:
# Don't set the wait cursor twice, because then when you
# restore it, it will still be a wait cursor.
cursor = QApplication.overrideCursor()
if cursor is None or cursor == 0:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
elif cursor.shape() != Qt.WaitCursor:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
progress = None
if iface is not None:
progress = MessageBarProgress()
ret = runalg(alg, progress)
if onFinish is not None and ret:
onFinish(alg, progress)
if iface is not None:
QApplication.restoreOverrideCursor()
progress.close()
return alg
def runAlgorithm(algOrName, onFinish, *args):
if isinstance(algOrName, GeoAlgorithm):
alg = algOrName
else:
alg = Processing.getAlgorithm(algOrName)
if alg is None:
print 'Error: Algorithm not found\n'
return
alg = alg.getCopy()
if len(args) == 1 and isinstance(args[0], dict):
# Set params by name and try to run the alg even if not all parameter values are provided,
# by using the default values instead.
setParams = []
for (name, value) in args[0].items():
param = alg.getParameterFromName(name)
if param and param.setValue(value):
setParams.append(name)
continue
output = alg.getOutputFromName(name)
if output and output.setValue(value):
continue
print 'Error: Wrong parameter value %s for parameter %s.' \
% (value, name)
ProcessingLog.addToLog(ProcessingLog.LOG_ERROR,
Processing.tr('Error in %s. Wrong parameter value %s for parameter %s.') \
% (alg.name, value, name))
return
# fill any missing parameters with default values if allowed
for param in alg.parameters:
if param.name not in setParams:
if not param.setValue(None):
print ('Error: Missing parameter value for parameter %s.' % (param.name))
ProcessingLog.addToLog(ProcessingLog.LOG_ERROR,
Processing.tr('Error in %s. Missing parameter value for parameter %s.') \
% (alg.name, param.name))
return
else:
if len(args) != alg.getVisibleParametersCount() \
+ alg.getVisibleOutputsCount():
print 'Error: Wrong number of parameters'
processing.alghelp(algOrName)
return
i = 0
for param in alg.parameters:
if not param.hidden:
if not param.setValue(args[i]):
print 'Error: Wrong parameter value: ' \
+ unicode(args[i])
return
i = i + 1
for output in alg.outputs:
if not output.hidden:
if not output.setValue(args[i]):
print 'Error: Wrong output value: ' + unicode(args[i])
return
i = i + 1
msg = alg.checkParameterValuesBeforeExecuting()
if msg:
print 'Unable to execute algorithm\n' + msg
return
if not alg.checkInputCRS():
print 'Warning: Not all input layers use the same CRS.\n' \
+ 'This can cause unexpected results.'
if iface is not None:
# Don't set the wait cursor twice, because then when you
# restore it, it will still be a wait cursor.
cursor = QApplication.overrideCursor()
if cursor is None or cursor == 0:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
elif cursor.shape() != Qt.WaitCursor:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
progress = None
if iface is not None :
progress = MessageBarProgress()
ret = runalg(alg, progress)
if onFinish is not None and ret:
onFinish(alg, progress)
if iface is not None:
QApplication.restoreOverrideCursor()
progress.close()
return alg
def runAlgorithm(algOrName, onFinish, *args):
if isinstance(algOrName, GeoAlgorithm):
alg = algOrName
else:
alg = Processing.getAlgorithm(algOrName)
if alg is None:
print 'Error: Algorithm not found\n'
return
if len(args) != alg.getVisibleParametersCount() \
+ alg.getVisibleOutputsCount():
print 'Error: Wrong number of parameters'
processing.alghelp(algOrName)
return
alg = alg.getCopy()
if isinstance(args, dict):
# Set params by name
for (name, value) in args.items():
if alg.getParameterFromName(name).setValue(value):
continue
if alg.getOutputFromName(name).setValue(value):
continue
print 'Error: Wrong parameter value %s for parameter %s.' \
% (value, name)
return
else:
i = 0
for param in alg.parameters:
if not param.hidden:
if not param.setValue(args[i]):
print 'Error: Wrong parameter value: ' \
+ unicode(args[i])
return
i = i + 1
for output in alg.outputs:
if not output.hidden:
if not output.setValue(args[i]):
print 'Error: Wrong output value: ' + unicode(args[i])
return
i = i + 1
msg = alg.checkParameterValuesBeforeExecuting()
if msg:
print 'Unable to execute algorithm\n' + msg
return
if not alg.checkInputCRS():
print 'Warning: Not all input layers use the same CRS.\n' \
+ 'This can cause unexpected results.'
ProcessingLog.addToLog(ProcessingLog.LOG_ALGORITHM, alg.getAsCommand())
# Don't set the wait cursor twice, because then when you
# restore it, it will still be a wait cursor.
cursor = QApplication.overrideCursor()
if cursor is None or cursor == 0:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
elif cursor.shape() != Qt.WaitCursor:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
progress = MessageBarProgress()
ret = UnthreadedAlgorithmExecutor.runalg(alg, progress)
if onFinish is not None and ret:
onFinish(alg, progress)
QApplication.restoreOverrideCursor()
progress.close()
return alg
def runAlgorithm(algOrName, onFinish, *args, **kwargs):
if isinstance(algOrName, GeoAlgorithm):
alg = algOrName
else:
alg = Processing.getAlgorithm(algOrName)
if alg is None:
# fix_print_with_import
print("Error: Algorithm not found\n")
QgsMessageLog.logMessage(
Processing.tr("Error: Algorithm {0} not found\n").format(algOrName), Processing.tr("Processing")
)
return
alg = alg.getCopy()
if len(args) == 1 and isinstance(args[0], dict):
# Set params by name and try to run the alg even if not all parameter values are provided,
# by using the default values instead.
setParams = []
for (name, value) in list(args[0].items()):
param = alg.getParameterFromName(name)
if param and param.setValue(value):
setParams.append(name)
continue
output = alg.getOutputFromName(name)
if output and output.setValue(value):
continue
# fix_print_with_import
print("Error: Wrong parameter value %s for parameter %s." % (value, name))
QgsMessageLog.logMessage(
Processing.tr("Error: Wrong parameter value {0} for parameter {1}.").format(value, name),
Processing.tr("Processing"),
)
ProcessingLog.addToLog(
ProcessingLog.LOG_ERROR,
Processing.tr("Error in %s. Wrong parameter value %s for parameter %s.") % (alg.name, value, name),
)
return
# fill any missing parameters with default values if allowed
for param in alg.parameters:
if param.name not in setParams:
if not param.setDefaultValue():
# fix_print_with_import
print("Error: Missing parameter value for parameter %s." % param.name)
QgsMessageLog.logMessage(
Processing.tr("Error: Missing parameter value for parameter {0}.").format(param.name),
Processing.tr("Processing"),
)
ProcessingLog.addToLog(
ProcessingLog.LOG_ERROR,
Processing.tr("Error in %s. Missing parameter value for parameter %s.")
% (alg.name, param.name),
)
return
else:
if len(args) != alg.getVisibleParametersCount() + alg.getVisibleOutputsCount():
# fix_print_with_import
print("Error: Wrong number of parameters")
QgsMessageLog.logMessage(
Processing.tr("Error: Wrong number of parameters"), Processing.tr("Processing")
)
processing.alghelp(algOrName)
return
i = 0
for param in alg.parameters:
if not param.hidden:
if not param.setValue(args[i]):
# fix_print_with_import
print("Error: Wrong parameter value: " + str(args[i]))
QgsMessageLog.logMessage(
Processing.tr("Error: Wrong parameter value: ") + str(args[i]), Processing.tr("Processing")
)
return
i = i + 1
for output in alg.outputs:
if not output.hidden:
if not output.setValue(args[i]):
# fix_print_with_import
print("Error: Wrong output value: " + str(args[i]))
QgsMessageLog.logMessage(
Processing.tr("Error: Wrong output value: ") + str(args[i]), Processing.tr("Processing")
)
return
i = i + 1
msg = alg._checkParameterValuesBeforeExecuting()
if msg:
# fix_print_with_import
print("Unable to execute algorithm\n" + str(msg))
QgsMessageLog.logMessage(
Processing.tr("Unable to execute algorithm\n{0}").format(msg), Processing.tr("Processing")
)
return
if not alg.checkInputCRS():
print("Warning: Not all input layers use the same CRS.\n" + "This can cause unexpected results.")
QgsMessageLog.logMessage(
Processing.tr("Warning: Not all input layers use the same CRS.\nThis can cause unexpected results."),
Processing.tr("Processing"),
)
# Don't set the wait cursor twice, because then when you
# restore it, it will still be a wait cursor.
overrideCursor = False
if iface is not None:
cursor = QApplication.overrideCursor()
if cursor is None or cursor == 0:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
overrideCursor = True
elif cursor.shape() != Qt.WaitCursor:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
overrideCursor = True
progress = None
if kwargs is not None and "progress" in list(kwargs.keys()):
progress = kwargs["progress"]
elif iface is not None:
progress = MessageBarProgress(alg.name)
ret = runalg(alg, progress)
if ret:
if onFinish is not None:
onFinish(alg, progress)
else:
QgsMessageLog.logMessage(
Processing.tr("There were errors executing the algorithm."), Processing.tr("Processing")
)
if overrideCursor:
QApplication.restoreOverrideCursor()
if isinstance(progress, MessageBarProgress):
progress.close()
return alg
def runAlgorithm(algOrName, parameters, onFinish=None, feedback=None, context=None):
if isinstance(algOrName, QgsProcessingAlgorithm):
alg = algOrName
else:
alg = QgsApplication.processingRegistry().createAlgorithmById(algOrName)
if feedback is None:
feedback = MessageBarProgress(alg.displayName() if alg else Processing.tr('Processing'))
if alg is None:
# fix_print_with_import
print('Error: Algorithm not found\n')
msg = Processing.tr('Error: Algorithm {0} not found\n').format(algOrName)
feedback.reportError(msg)
raise QgsProcessingException(msg)
# check for any mandatory parameters which were not specified
for param in alg.parameterDefinitions():
if param.name() not in parameters:
if not param.flags() & QgsProcessingParameterDefinition.FlagOptional:
# fix_print_with_import
msg = Processing.tr('Error: Missing parameter value for parameter {0}.').format(param.name())
print('Error: Missing parameter value for parameter %s.' % param.name())
feedback.reportError(msg)
raise QgsProcessingException(msg)
if context is None:
context = dataobjects.createContext(feedback)
ok, msg = alg.checkParameterValues(parameters, context)
if not ok:
# fix_print_with_import
print('Unable to execute algorithm\n' + str(msg))
msg = Processing.tr('Unable to execute algorithm\n{0}').format(msg)
feedback.reportError(msg)
raise QgsProcessingException(msg)
if not alg.validateInputCrs(parameters, context):
print('Warning: Not all input layers use the same CRS.\n' +
'This can cause unexpected results.')
feedback.pushInfo(
Processing.tr('Warning: Not all input layers use the same CRS.\nThis can cause unexpected results.'))
ret, results = execute(alg, parameters, context, feedback)
if ret:
feedback.pushInfo(
Processing.tr('Results: {}').format(results))
if onFinish is not None:
onFinish(alg, context, feedback)
else:
# auto convert layer references in results to map layers
for out in alg.outputDefinitions():
if isinstance(out, (QgsProcessingOutputVectorLayer, QgsProcessingOutputRasterLayer, QgsProcessingOutputMapLayer)):
result = results[out.name()]
if not isinstance(result, QgsMapLayer):
layer = context.takeResultLayer(result) # transfer layer ownership out of context
if layer:
results[out.name()] = layer # replace layer string ref with actual layer (+ownership)
else:
msg = Processing.tr("There were errors executing the algorithm.")
feedback.reportError(msg)
raise QgsProcessingException(msg)
if isinstance(feedback, MessageBarProgress):
feedback.close()
return results
def runAlgorithm(algOrName, onFinish, *args, **kwargs):
if isinstance(algOrName, GeoAlgorithm):
alg = algOrName
else:
alg = QgsApplication.processingRegistry().algorithmById(algOrName)
if alg is None:
# fix_print_with_import
print('Error: Algorithm not found\n')
QgsMessageLog.logMessage(
Processing.tr('Error: Algorithm {0} not found\n').format(
algOrName), Processing.tr("Processing"))
return
parameters = {}
if len(args) == 1 and isinstance(args[0], dict):
# Set params by name and try to run the alg even if not all parameter values are provided,
# by using the default values instead.
for (name, value) in list(args[0].items()):
param = alg.parameterDefinition(name)
if param:
parameters[param.name()] = value
continue
# fix_print_with_import
print('Error: Wrong parameter value %s for parameter %s.' %
(value, name))
QgsMessageLog.logMessage(
Processing.tr(
'Error: Wrong parameter value {0} for parameter {1}.').
format(value, name), Processing.tr("Processing"))
QgsMessageLog.logMessage(
Processing.
tr('Error in {0}. Wrong parameter value {1} for parameter {2}.'
).format(alg.name(), value, name),
Processing.tr("Processing"), QgsMessageLog.CRITICAL)
return
# check for any manadatory parameters which were not specified
for param in alg.parameterDefinitions():
if param.name() not in parameters:
if not param.flags(
) & QgsProcessingParameterDefinition.FlagOptional:
# fix_print_with_import
print(
'Error: Missing parameter value for parameter %s.'
% param.name())
QgsMessageLog.logMessage(
Processing.
tr('Error: Missing parameter value for parameter {0}.'
).format(param.name()),
Processing.tr("Processing"))
return
else:
if len(args) != alg.countVisibleParameters():
# fix_print_with_import
print('Error: Wrong number of parameters')
QgsMessageLog.logMessage(
Processing.tr('Error: Wrong number of parameters'),
Processing.tr("Processing"))
processing.algorithmHelp(algOrName)
return
i = 0
for param in alg.parameterDefinitions():
if not param.flags(
) & QgsProcessingParameterDefinition.FlagHidden:
if not True: # TODO param.setValue(args[i]):
# fix_print_with_import
print('Error: Wrong parameter value: ' + str(args[i]))
QgsMessageLog.logMessage(
Processing.tr('Error: Wrong parameter value: ') +
str(args[i]), Processing.tr("Processing"))
return
else:
parameters[param.name()] = args[i]
i = i + 1
for output in alg.outputs:
if not output.flags(
) & QgsProcessingParameterDefinition.FlagHidden:
if not output.setValue(args[i]):
# fix_print_with_import
print('Error: Wrong output value: ' + str(args[i]))
QgsMessageLog.logMessage(
Processing.tr('Error: Wrong output value: ') +
str(args[i]), Processing.tr("Processing"))
return
i = i + 1
context = None
if kwargs is not None and 'context' in list(kwargs.keys()):
context = kwargs["context"]
else:
context = dataobjects.createContext()
ok, msg = alg.checkParameterValues(parameters, context)
if not ok:
# fix_print_with_import
print('Unable to execute algorithm\n' + str(msg))
QgsMessageLog.logMessage(
Processing.tr('Unable to execute algorithm\n{0}').format(msg),
Processing.tr("Processing"))
return
if not alg.validateInputCrs(parameters, context):
print('Warning: Not all input layers use the same CRS.\n' +
'This can cause unexpected results.')
QgsMessageLog.logMessage(
Processing.
tr('Warning: Not all input layers use the same CRS.\nThis can cause unexpected results.'
), Processing.tr("Processing"))
# Don't set the wait cursor twice, because then when you
# restore it, it will still be a wait cursor.
overrideCursor = False
if iface is not None:
cursor = QApplication.overrideCursor()
if cursor is None or cursor == 0:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
overrideCursor = True
elif cursor.shape() != Qt.WaitCursor:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
overrideCursor = True
feedback = None
if kwargs is not None and "feedback" in list(kwargs.keys()):
feedback = kwargs["feedback"]
elif iface is not None:
feedback = MessageBarProgress(alg.displayName())
ret, results = execute(alg, parameters, context, feedback)
if ret:
if onFinish is not None:
onFinish(alg, context, feedback)
else:
QgsMessageLog.logMessage(
Processing.tr("There were errors executing the algorithm."),
Processing.tr("Processing"))
if overrideCursor:
QApplication.restoreOverrideCursor()
if isinstance(feedback, MessageBarProgress):
feedback.close()
return results
def executeAlgorithm(self, alg_id, parent, in_place=False, as_batch=False):
"""Executes a project model with GUI interaction if needed.
:param alg_id: algorithm id
:type alg_id: string
:param parent: parent widget
:type parent: QWidget
:param in_place: in place flag, defaults to False
:type in_place: bool, optional
:param as_batch: execute as batch flag, defaults to False
:type as_batch: bool, optional
"""
config = {}
if in_place:
config['IN_PLACE'] = True
alg = QgsApplication.instance().processingRegistry().createAlgorithmById(alg_id, config)
if alg is not None:
ok, message = alg.canExecute()
if not ok:
dlg = MessageDialog()
dlg.setTitle(self.tr('Error executing algorithm'))
dlg.setMessage(
self.tr('<h3>This algorithm cannot '
'be run :-( </h3>\n{0}').format(message))
dlg.exec_()
return
if as_batch:
dlg = BatchAlgorithmDialog(alg, iface.mainWindow())
dlg.show()
dlg.exec_()
else:
in_place_input_parameter_name = 'INPUT'
if hasattr(alg, 'inputParameterName'):
in_place_input_parameter_name = alg.inputParameterName()
if in_place and not [d for d in alg.parameterDefinitions() if d.name() not in (in_place_input_parameter_name, 'OUTPUT')]:
parameters = {}
feedback = MessageBarProgress(algname=alg.displayName())
ok, results = execute_in_place(alg, parameters, feedback=feedback)
if ok:
iface.messageBar().pushSuccess('', self.tr('{algname} completed. %n feature(s) processed.', n=results['__count']).format(algname=alg.displayName()))
feedback.close()
# MessageBarProgress handles errors
return
if alg.countVisibleParameters() > 0:
dlg = alg.createCustomParametersWidget(parent)
if not dlg:
dlg = AlgorithmDialog(alg, in_place, iface.mainWindow())
canvas = iface.mapCanvas()
prevMapTool = canvas.mapTool()
dlg.show()
dlg.exec_()
if canvas.mapTool() != prevMapTool:
try:
canvas.mapTool().reset()
except Exception:
pass
canvas.setMapTool(prevMapTool)
else:
feedback = MessageBarProgress(algname=alg.displayName())
context = dataobjects.createContext(feedback)
parameters = {}
ret, results = execute(alg, parameters, context, feedback)
handleAlgorithmResults(alg, context, feedback)
feedback.close()
def runAlgorithm(algOrName, onFinish, *args, **kwargs):
if isinstance(algOrName, GeoAlgorithm):
alg = algOrName
else:
alg = Processing.getAlgorithm(algOrName)
if alg is None:
# fix_print_with_import
print('Error: Algorithm not found\n')
QgsMessageLog.logMessage(
Processing.tr('Error: Algorithm {0} not found\n').format(
algOrName), Processing.tr("Processing"))
return
alg = alg.getCopy()
if len(args) == 1 and isinstance(args[0], dict):
# Set params by name and try to run the alg even if not all parameter values are provided,
# by using the default values instead.
setParams = []
for (name, value) in args[0].items():
param = alg.getParameterFromName(name)
if param and param.setValue(value):
setParams.append(name)
continue
output = alg.getOutputFromName(name)
if output and output.setValue(value):
continue
# fix_print_with_import
print('Error: Wrong parameter value %s for parameter %s.' %
(value, name))
QgsMessageLog.logMessage(
Processing.tr(
'Error: Wrong parameter value {0} for parameter {1}.').
format(value, name), Processing.tr("Processing"))
ProcessingLog.addToLog(
ProcessingLog.LOG_ERROR,
Processing.
tr('Error in %s. Wrong parameter value %s for parameter %s.'
) % (alg.name, value, name))
return
# fill any missing parameters with default values if allowed
for param in alg.parameters:
if param.name not in setParams:
if not param.setDefaultValue():
# fix_print_with_import
print(
'Error: Missing parameter value for parameter %s.'
% param.name)
QgsMessageLog.logMessage(
Processing.
tr('Error: Missing parameter value for parameter {0}.'
).format(param.name),
Processing.tr("Processing"))
ProcessingLog.addToLog(
ProcessingLog.LOG_ERROR,
Processing.
tr('Error in %s. Missing parameter value for parameter %s.'
) % (alg.name, param.name))
return
else:
if len(args) != alg.getVisibleParametersCount(
) + alg.getVisibleOutputsCount():
# fix_print_with_import
print('Error: Wrong number of parameters')
QgsMessageLog.logMessage(
Processing.tr('Error: Wrong number of parameters'),
Processing.tr("Processing"))
processing.alghelp(algOrName)
return
i = 0
for param in alg.parameters:
if not param.hidden:
if not param.setValue(args[i]):
# fix_print_with_import
print('Error: Wrong parameter value: ' +
unicode(args[i]))
QgsMessageLog.logMessage(
Processing.tr('Error: Wrong parameter value: ') +
unicode(args[i]), Processing.tr("Processing"))
return
i = i + 1
for output in alg.outputs:
if not output.hidden:
if not output.setValue(args[i]):
# fix_print_with_import
print('Error: Wrong output value: ' + unicode(args[i]))
QgsMessageLog.logMessage(
Processing.tr('Error: Wrong output value: ') +
unicode(args[i]), Processing.tr("Processing"))
return
i = i + 1
msg = alg._checkParameterValuesBeforeExecuting()
if msg:
# fix_print_with_import
print('Unable to execute algorithm\n' + unicode(msg))
QgsMessageLog.logMessage(
Processing.tr('Unable to execute algorithm\n{0}').format(msg),
Processing.tr("Processing"))
return
if not alg.checkInputCRS():
print('Warning: Not all input layers use the same CRS.\n' +
'This can cause unexpected results.')
QgsMessageLog.logMessage(
Processing.
tr('Warning: Not all input layers use the same CRS.\nThis can cause unexpected results.'
), Processing.tr("Processing"))
# Don't set the wait cursor twice, because then when you
# restore it, it will still be a wait cursor.
overrideCursor = False
if iface is not None:
cursor = QApplication.overrideCursor()
if cursor is None or cursor == 0:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
overrideCursor = True
elif cursor.shape() != Qt.WaitCursor:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
overrideCursor = True
progress = None
if kwargs is not None and "progress" in kwargs.keys():
progress = kwargs["progress"]
elif iface is not None:
progress = MessageBarProgress(alg.name)
ret = runalg(alg, progress)
if ret:
if onFinish is not None:
onFinish(alg, progress)
else:
QgsMessageLog.logMessage(
Processing.tr("There were errors executing the algorithm."),
Processing.tr("Processing"))
if overrideCursor:
QApplication.restoreOverrideCursor()
if isinstance(progress, MessageBarProgress):
progress.close()
return alg
def runAlgorithm(algOrName, onFinish, *args, **kwargs):
if isinstance(algOrName, GeoAlgorithm):
alg = algOrName
else:
alg = QgsApplication.processingRegistry().algorithmById(algOrName)
if alg is None:
# fix_print_with_import
print('Error: Algorithm not found\n')
QgsMessageLog.logMessage(Processing.tr('Error: Algorithm {0} not found\n').format(algOrName),
Processing.tr("Processing"))
return
parameters = {}
if len(args) == 1 and isinstance(args[0], dict):
# Set params by name and try to run the alg even if not all parameter values are provided,
# by using the default values instead.
for (name, value) in list(args[0].items()):
param = alg.parameterDefinition(name)
if param:
parameters[param.name()] = value
continue
# fix_print_with_import
print('Error: Wrong parameter value %s for parameter %s.' % (value, name))
QgsMessageLog.logMessage(
Processing.tr('Error: Wrong parameter value {0} for parameter {1}.').format(value, name),
Processing.tr("Processing"))
QgsMessageLog.logMessage(Processing.tr('Error in {0}. Wrong parameter value {1} for parameter {2}.').format(
alg.name(), value, name
), Processing.tr("Processing"),
QgsMessageLog.CRITICAL
)
return
# check for any manadatory parameters which were not specified
for param in alg.parameterDefinitions():
if param.name() not in parameters:
if not param.flags() & QgsProcessingParameterDefinition.FlagOptional:
# fix_print_with_import
print('Error: Missing parameter value for parameter %s.' % param.name())
QgsMessageLog.logMessage(
Processing.tr('Error: Missing parameter value for parameter {0}.').format(param.name()),
Processing.tr("Processing"))
return
else:
if len(args) != alg.countVisibleParameters():
# fix_print_with_import
print('Error: Wrong number of parameters')
QgsMessageLog.logMessage(Processing.tr('Error: Wrong number of parameters'),
Processing.tr("Processing"))
processing.algorithmHelp(algOrName)
return
i = 0
for param in alg.parameterDefinitions():
if not param.flags() & QgsProcessingParameterDefinition.FlagHidden:
if not True: # TODO param.setValue(args[i]):
# fix_print_with_import
print('Error: Wrong parameter value: ' + str(args[i]))
QgsMessageLog.logMessage(Processing.tr('Error: Wrong parameter value: ') + str(args[i]),
Processing.tr("Processing"))
return
else:
parameters[param.name()] = args[i]
i = i + 1
for output in alg.outputs:
if not output.flags() & QgsProcessingParameterDefinition.FlagHidden:
if not output.setValue(args[i]):
# fix_print_with_import
print('Error: Wrong output value: ' + str(args[i]))
QgsMessageLog.logMessage(Processing.tr('Error: Wrong output value: ') + str(args[i]),
Processing.tr("Processing"))
return
i = i + 1
context = None
if kwargs is not None and 'context' in list(kwargs.keys()):
context = kwargs["context"]
else:
context = dataobjects.createContext()
ok, msg = alg.checkParameterValues(parameters, context)
if not ok:
# fix_print_with_import
print('Unable to execute algorithm\n' + str(msg))
QgsMessageLog.logMessage(Processing.tr('Unable to execute algorithm\n{0}').format(msg),
Processing.tr("Processing"))
return
if not alg.validateInputCrs(parameters, context):
print('Warning: Not all input layers use the same CRS.\n' +
'This can cause unexpected results.')
QgsMessageLog.logMessage(
Processing.tr('Warning: Not all input layers use the same CRS.\nThis can cause unexpected results.'),
Processing.tr("Processing"))
# Don't set the wait cursor twice, because then when you
# restore it, it will still be a wait cursor.
overrideCursor = False
if iface is not None:
cursor = QApplication.overrideCursor()
if cursor is None or cursor == 0:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
overrideCursor = True
elif cursor.shape() != Qt.WaitCursor:
QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
overrideCursor = True
feedback = None
if kwargs is not None and "feedback" in list(kwargs.keys()):
feedback = kwargs["feedback"]
elif iface is not None:
feedback = MessageBarProgress(alg.displayName())
ret, results = execute(alg, parameters, context, feedback)
if ret:
if onFinish is not None:
onFinish(alg, context, feedback)
else:
QgsMessageLog.logMessage(Processing.tr("There were errors executing the algorithm."),
Processing.tr("Processing"))
if overrideCursor:
QApplication.restoreOverrideCursor()
if isinstance(feedback, MessageBarProgress):
feedback.close()
return results