def test_coalesce_decoalesce_with_iter(self):
for rows in vis_timeslice_iter(self.blockvis):
visslice = create_visibility_from_rows(self.blockvis, rows)
cvisslice = convert_blockvisibility_to_visibility(visslice)
assert numpy.min(cvisslice.frequency) == numpy.min(self.frequency)
assert numpy.min(cvisslice.frequency) > 0.0
dvisslice = decoalesce_visibility(cvisslice)
assert dvisslice.nvis == visslice.nvis
def test_vis_timeslice_iterator(self):
self.actualSetUp()
nchunks = vis_timeslices(self.vis, timeslice='auto')
log.debug('Found %d chunks' % (nchunks))
assert nchunks > 1
total_rows = 0
for chunk, rows in enumerate(vis_timeslice_iter(self.vis, nchunks)):
visslice = create_visibility_from_rows(self.vis, rows)
total_rows += visslice.nvis
assert visslice.vis[0].real == visslice.time[0]
assert len(rows)
assert numpy.sum(rows) < self.vis.nvis
assert total_rows == self.vis.nvis, "Total rows iterated %d, Original rows %d" % (
total_rows, self.vis.nvis)
def create_gaintable_from_screen(vis,
sc,
screen,
height=3e5,
vis_slices=None,
scale=1.0,
**kwargs):
""" Create gaintables from a screen calculated using ARatmospy
:param vis:
:param sc: Sky components for which pierce points are needed
:param screen:
:param height: Height (in m) of screen above telescope e.g. 3e5
:param scale: Multiply the screen by this factor
:return:
"""
assert isinstance(vis, BlockVisibility)
station_locations = vis.configuration.xyz
nant = station_locations.shape[0]
t2r = numpy.pi / 43200.0
gaintables = [
create_gaintable_from_blockvisibility(vis, **kwargs) for i in sc
]
# The time in the Visibility is hour angle in seconds!
for iha, rows in enumerate(vis_timeslice_iter(vis, vis_slices=vis_slices)):
v = create_visibility_from_rows(vis, rows)
ha = numpy.average(v.time)
number_bad = 0
number_good = 0
for icomp, comp in enumerate(sc):
pp = find_pierce_points(station_locations,
(comp.direction.ra.rad + t2r * ha) * u.rad,
comp.direction.dec,
height=height,
phasecentre=vis.phasecentre)
scr = numpy.zeros([nant])
for ant in range(nant):
pp0 = pp[ant][0:2]
worldloc = [pp0[0], pp0[1], ha, 1e8]
try:
pixloc = screen.wcs.wcs_world2pix([worldloc],
0)[0].astype('int')
scr[ant] = scale * screen.data[pixloc[3], pixloc[2],
pixloc[1], pixloc[0]]
number_good += 1
except:
number_bad += 1
scr[ant] = 0.0
gaintables[icomp].gain[iha, :, :, :] = numpy.exp(
1j * scr[:, numpy.newaxis, numpy.newaxis, numpy.newaxis])
gaintables[icomp].phasecentre = comp.direction
if number_bad > 0:
log.warning(
"create_gaintable_from_screen: %d pierce points are inside the screen image"
% (number_good))
log.warning(
"create_gaintable_from_screen: %d pierce points are outside the screen image"
% (number_bad))
return gaintables
def test_vis_timeslice_iterator_single(self):
self.actualSetUp(times=numpy.zeros([1]))
nchunks = vis_timeslices(self.vis, timeslice='auto')
log.debug('Found %d chunks' % (nchunks))
for chunk, rows in enumerate(vis_timeslice_iter(self.vis)):
assert len(rows)
def simulate_gaintable_from_voltage_patterns(vis,
sc,
vp_list,
vp_coeffs,
vis_slices=None,
order=3,
use_radec=False,
**kwargs):
""" Create gaintables for a set of zernikes
:param vis:
:param sc: Sky components for which pierce points are needed
:param vp: List of Voltage patterns in AZELGEO frame
:param vp_coeffs: Fractional contribution [nants, nvp]
:param order: order of spline (default is 3)
:return:
"""
ntimes, nant = vis.vis.shape[0:2]
vp_coeffs = numpy.array(vp_coeffs)
gaintables = [
create_gaintable_from_blockvisibility(vis, **kwargs) for i in sc
]
if not use_radec:
assert isinstance(vis, BlockVisibility)
assert vis.configuration.mount[
0] == 'azel', "Mount %s not supported yet" % vis.configuration.mount[
0]
# The time in the Visibility is hour angle in seconds!
number_bad = 0
number_good = 0
# Cache the splines, one per voltage pattern
real_splines = list()
imag_splines = list()
for ivp, vp in enumerate(vp_list):
assert vp.wcs.wcs.ctype[0] == 'AZELGEO long', vp.wcs.wcs.ctype[0]
assert vp.wcs.wcs.ctype[1] == 'AZELGEO lati', vp.wcs.wcs.ctype[1]
nchan, npol, ny, nx = vp.data.shape
real_splines.append(
RectBivariateSpline(range(ny),
range(nx),
vp.data[0, 0, ...].real,
kx=order,
ky=order))
imag_splines.append(
RectBivariateSpline(range(ny),
range(nx),
vp.data[0, 0, ...].imag,
kx=order,
ky=order))
latitude = vis.configuration.location.lat.rad
r2d = 180.0 / numpy.pi
s2r = numpy.pi / 43200.0
# For each hourangle, we need to calculate the location of a component
# in AZELGEO. With that we can then look up the relevant gain from the
# voltage pattern
for iha, rows in enumerate(
vis_timeslice_iter(vis, vis_slices=vis_slices)):
v = create_visibility_from_rows(vis, rows)
ha = numpy.average(v.time)
har = s2r * ha
# Calculate the az el for this hourangle and the phasecentre declination
azimuth_centre, elevation_centre = hadec_to_azel(
har, vis.phasecentre.dec.rad, latitude)
for icomp, comp in enumerate(sc):
antgain = numpy.zeros([nant], dtype='complex')
# Calculate the location of the component in AZELGEO, then add the pointing offset
# for each antenna
hacomp = comp.direction.ra.rad - vis.phasecentre.ra.rad + har
deccomp = comp.direction.dec.rad
azimuth_comp, elevation_comp = hadec_to_azel(
hacomp, deccomp, latitude)
for ant in range(nant):
for ivp, vp in enumerate(vp_list):
nchan, npol, ny, nx = vp.data.shape
wcs_azel = vp.wcs.deepcopy()
az_comp = azimuth_centre * r2d
el_comp = elevation_centre * r2d
# We use WCS sensible coordinate handling by labelling the axes misleadingly
wcs_azel.wcs.crval[0] = az_comp
wcs_azel.wcs.crval[1] = el_comp
wcs_azel.wcs.ctype[0] = 'RA---SIN'
wcs_azel.wcs.ctype[1] = 'DEC--SIN'
worldloc = [
azimuth_comp * r2d, elevation_comp * r2d,
vp.wcs.wcs.crval[2], vp.wcs.wcs.crval[3]
]
try:
pixloc = wcs_azel.sub(2).wcs_world2pix(
[worldloc[:2]], 1)[0]
assert pixloc[0] > 2
assert pixloc[0] < nx - 3
assert pixloc[1] > 2
assert pixloc[1] < ny - 3
gain = real_splines[ivp].ev(pixloc[1], pixloc[0]) \
+ 1j * imag_splines[ivp](pixloc[1], pixloc[0])
antgain[ant] += vp_coeffs[ant, ivp] * gain
number_good += 1
except:
number_bad += 1
antgain[ant] = 0.0
antgain[ant] = 1.0 / antgain[ant]
gaintables[icomp].gain[iha, :, :, :] = antgain[:,
numpy.newaxis,
numpy.newaxis,
numpy.newaxis]
gaintables[icomp].phasecentre = comp.direction
else:
assert isinstance(vis, BlockVisibility)
number_bad = 0
number_good = 0
# Cache the splines, one per voltage pattern
real_splines = list()
imag_splines = list()
for ivp, vp in enumerate(vp_list):
nchan, npol, ny, nx = vp.data.shape
real_splines.append(
RectBivariateSpline(range(ny),
range(nx),
vp.data[0, 0, ...].real,
kx=order,
ky=order))
imag_splines.append(
RectBivariateSpline(range(ny),
range(nx),
vp.data[0, 0, ...].imag,
kx=order,
ky=order))
for iha, rows in enumerate(
vis_timeslice_iter(vis, vis_slices=vis_slices)):
# The time in the Visibility is hour angle in seconds!
r2d = 180.0 / numpy.pi
# For each hourangle, we need to calculate the location of a component
# in AZELGEO. With that we can then look up the relevant gain from the
# voltage pattern
v = create_visibility_from_rows(vis, rows)
ha = numpy.average(v.time)
for icomp, comp in enumerate(sc):
antgain = numpy.zeros([nant], dtype='complex')
antwt = numpy.zeros([nant])
ra_comp = comp.direction.ra.rad
dec_comp = comp.direction.dec.rad
for ant in range(nant):
for ivp, vp in enumerate(vp_list):
assert vp.wcs.wcs.ctype[
0] == 'RA---SIN', vp.wcs.wcs.ctype[0]
assert vp.wcs.wcs.ctype[
1] == 'DEC--SIN', vp.wcs.wcs.ctype[1]
worldloc = [
ra_comp * r2d, dec_comp * r2d, vp.wcs.wcs.crval[2],
vp.wcs.wcs.crval[3]
]
nchan, npol, ny, nx = vp.data.shape
try:
pixloc = vp.wcs.sub(2).wcs_world2pix(
[worldloc[:2]], 1)[0]
assert pixloc[0] > 2
assert pixloc[0] < nx - 3
assert pixloc[1] > 2
assert pixloc[1] < ny - 3
gain = real_splines[ivp].ev(pixloc[1], pixloc[0]) \
+ 1j * imag_splines[ivp](pixloc[1], pixloc[0])
antgain[ant] += vp_coeffs[ant, ivp] * gain
antwt[ant] = 1.0
number_good += 1
except:
number_bad += 1
antgain[ant] = 1e15
antwt[ant] = 0.0
antgain[ant] = 1.0 / antgain[ant]
gaintables[icomp].gain[
iha, :, :, :] = antgain[:, numpy.newaxis,
numpy.newaxis, numpy.newaxis]
gaintables[icomp].weight[
iha, :, :, :] = antwt[:, numpy.newaxis, numpy.newaxis,
numpy.newaxis]
gaintables[icomp].phasecentre = comp.direction
if number_bad > 0:
log.warning(
"simulate_gaintable_from_voltage_patterns: %d points are inside the voltage pattern image"
% (number_good))
log.warning(
"simulate_gaintable_from_voltage_patterns: %d points are outside the voltage pattern image"
% (number_bad))
return gaintables
def create_gaintable_from_pointingtable(vis,
sc,
pt,
vp,
vis_slices=None,
scale=1.0,
order=3,
**kwargs):
""" Create gaintables from a pointing table
:param vis:
:param sc: Sky components for which pierce points are needed
:param pt: Pointing table
:param vp: Voltage pattern
:param scale: Multiply the screen by this factor
:param order: order of spline (default is 3)
:return:
"""
assert isinstance(vis, BlockVisibility)
nant = vis.vis.shape[1]
gaintables = [
create_gaintable_from_blockvisibility(vis, **kwargs) for i in sc
]
nchan, npol, ny, nx = vp.data.shape
real_spline = RectBivariateSpline(range(ny),
range(nx),
vp.data[0, 0, ...].real,
kx=order,
ky=order)
imag_spline = RectBivariateSpline(range(ny),
range(nx),
vp.data[0, 0, ...].imag,
kx=order,
ky=order)
# The time in the Visibility is hour angle in seconds!
for iha, rows in enumerate(vis_timeslice_iter(vis, vis_slices=vis_slices)):
v = create_visibility_from_rows(vis, rows)
ha = numpy.average(v.time)
pt_rows = (pt.time == ha)
pointing_ha = pt.pointing[pt_rows]
number_bad = 0
number_good = 0
r2d = 180.0 / numpy.pi
for icomp, comp in enumerate(sc):
antgain = numpy.zeros([nant], dtype='complex')
for ant in range(nant):
worldloc = [
float(
(comp.direction.ra.rad + pointing_ha[0, ant, 0, 0, 0])
* r2d),
float(
(comp.direction.dec.rad + pointing_ha[0, ant, 0, 0, 1])
* r2d), vp.wcs.wcs.crval[2], vp.wcs.wcs.crval[3]
]
try:
pixloc = vp.wcs.wcs_world2pix([worldloc], 0)[0][0:2]
gain = real_spline.ev(
pixloc[1],
pixloc[0]) + 1j * imag_spline(pixloc[1], pixloc[0])
antgain[ant] = 1.0 / (scale * gain)
number_good += 1
except:
number_bad += 1
antgain[ant] = 0.0
gaintables[icomp].gain[iha, :, :, :] = antgain[:, numpy.newaxis,
numpy.newaxis,
numpy.newaxis]
gaintables[icomp].phasecentre = comp.direction
if number_bad > 0:
log.warning(
"create_gaintable_from_pointingtable: %d points are inside the voltage pattern image"
% (number_good))
log.warning(
"create_gaintable_from_pointingtable: %d points are outside the voltage pattern image"
% (number_bad))
return gaintables
