def run_radial_simul(self, my_front_reconstruction, my_front_advancement,
my_vertex_or_path, my_param):
# setting up the verbosity level of the log at console
# setup_logging_to_console(verbosity_level='error')
outputfolder = "./Temp_Data/" + my_vertex_or_path + "_radial_" + my_front_advancement + "_" + my_front_reconstruction
self.remove(outputfolder)
# creating mesh
Mesh = CartesianMesh(my_param['Lx'], my_param['Ly'], my_param['Nx'],
my_param['Ny'])
# solid properties
nu = my_param['nu'] # Poisson's ratio
youngs_mod = my_param['youngs_mod'] # Young's modulus
Eprime = youngs_mod / (1 - nu**2) # plain strain modulus
K_Ic = my_param['K_Ic'] # fracture toughness
Cl = my_param['Cl'] # Carter's leak off coefficient
# material properties
Solid = MaterialProperties(Mesh, Eprime, K_Ic, Carters_coef=Cl)
# injection parameters
Q0 = my_param['Q0'] # injection rate
Injection = InjectionProperties(Q0, Mesh)
# fluid properties
Fluid = FluidProperties(viscosity=my_param['viscosity'])
# simulation properties
simulProp = SimulationProperties()
simulProp.finalTime = my_param[
'finalTime'] # the time at which the simulation stops
simulProp.set_tipAsymptote(
my_vertex_or_path
) # tip asymptote is evaluated with the viscosity dominated assumption
simulProp.frontAdvancing = my_front_advancement # to set explicit front tracking
simulProp.plotFigure = False
simulProp.set_solTimeSeries(np.asarray([2, 200, 5000, 30000, 100000]))
simulProp.saveTSJump, simulProp.plotTSJump = 5, 5 # save and plot after every five time steps
simulProp.set_outputFolder(outputfolder)
simulProp.projMethod = my_front_reconstruction
simulProp.log2file = False
# initialization parameters
Fr_geometry = Geometry('radial', radius=my_param['initialR'])
init_param = InitializationParameters(Fr_geometry,
regime=my_vertex_or_path)
# creating fracture object
Fr = Fracture(Mesh, init_param, Solid, Fluid, Injection, simulProp)
# create a Controller
controller = Controller(Fr, Solid, Fluid, Injection, simulProp)
# run the simulation
exitcode = controller.run()
return exitcode, outputfolder
setup_logging_to_console(verbosity_level='info')
# creating mesh
Mesh = CartesianMesh(6, 6, 41, 41)
# solid properties
nu = 0.4 # Poisson's ratio
youngs_mod = 3.3e10 # Young's modulus
Eprime = youngs_mod / (1 - nu**2) # plain strain modulus
K_Ic = 1e7 # fracture toughness
Solid = MaterialProperties(Mesh, Eprime, K_Ic, minimum_width=1e-9)
# injection parameters
Q0 = 0.001 # injection rate
Injection = InjectionProperties(Q0, Mesh)
# fluid properties
viscosity = 1.1e-3
Fluid = FluidProperties(viscosity=viscosity)
# simulation properties
simulProp = SimulationProperties()
simulProp.finalTime = 50 # the time at which the simulation stops
simulProp.set_outputFolder("./Data/star") # the address of the output folder
simulProp.plotTSJump = 4
# initializing fracture
from fracture_initialization import get_radial_survey_cells
initRad = np.pi
surv_cells, _, inner_cells = get_radial_survey_cells(Mesh, initRad)
def source_location(x, y):
""" This function is used to evaluate if a point is a source, i.e.
the fluid is injected at the given point.
"""
# the condition
return abs(x) < 0.01 and abs(y) < 0.5
Q0 = 0.001 / 60
Injection = InjectionProperties(
Q0, # see documentation of the class for details
Mesh,
source_loc_func=source_location,
sink_loc_func=sink_location,
sink_vel_func=sink_vel,
model_inj_line=True,
il_compressibility=1e-9,
il_volume=1e-3,
perforation_friction=0,
initial_pressure=np.nan
) # the initial pressure in injection line is set below
# fluid properties
Fluid = FluidProperties(
viscosity=0.617,
rheology='HBF', # set fluid rheology to Herschel-Bulkley
compressibility=1e-11,
n=0.617,
k=0.22,
T0=2.3)
K_Ic,
confining_stress_func=sigmaO_func)
def source_location(x, y):
""" This function is used to evaluate if a point is included in source, i.e. the fluid is injected at the given
point.
"""
tolerance = 2.
# the condition
return abs(x) < 75 and (y >= -75. - tolerance and y <= -75. + tolerance)
# injection parameters
Q0 = 0.001 # injection rate
Injection = InjectionProperties(Q0, Mesh, source_loc_func=source_location)
# fluid properties
Fluid = FluidProperties(viscosity=1.1e-3, density=1000)
# simulation properties
simulProp = SimulationProperties()
simulProp.finalTime = 1.1e4 # the time at which the simulation stops
simulProp.set_outputFolder(
"./Data/buoyant_line_source") # the disk address where the files are saved
simulProp.gravity = True # take the effect of gravity into account
simulProp.set_mesh_extension_direction(['top'])
simulProp.plotVar = ['w', 'regime']
simulProp.toleranceEHL = 1e-3
# initializing fracture
def My_KIc_func(x, y):
""" The function providing the fracture toughness"""
if x < 0.2:
return K_Ic1
else:
return K_Ic1 * 3.6
Solid = MaterialProperties(Mesh,
Eprime,
K1c_func=My_KIc_func,
minimum_width=1e-8)
# injection parameters
Q0 = 0.05 # injection rate
Injection = InjectionProperties(Q0, Mesh, source_coordinates=[0.1, 0.])
# fluid properties
Fluid = FluidProperties(viscosity=1.1e-3)
# simulation properties
simulProp = SimulationProperties()
simulProp.finalTime = 0.0003 # the time at which the simulation stops
myfolder = "./Data/toughness_jump_3p6"
simulProp.set_outputFolder(
myfolder) # the disk address where the files are saved
simulProp.projMethod = 'LS_continousfront'
simulProp.frontAdvancing = 'implicit'
simulProp.useBlockToeplizCompression = True
simulProp.saveToDisk = False
simulProp.bckColor = 'K1c'
elif y < -50:
return 5.25e6
else:
return 5.e6
# material properties
Solid = MaterialProperties(Mesh,
Eprime,
toughness=K_Ic,
confining_stress_func=sigmaO_func,
Carters_coef=1e-6)
# injection parameters
Q0 = np.asarray([[0, 6000], [0.001, 0]])
Injection = InjectionProperties(Q0, Mesh, source_coordinates=[0, -20])
# fluid properties
Fluid = FluidProperties(viscosity=1e-3)
# simulation properties
simulProp = SimulationProperties()
simulProp.finalTime = 1.6e4 # the time at which the simulation stops
simulProp.set_outputFolder(
"./Data/fracture_closure") # the disk address where the files are saved
simulProp.bckColor = 'confining stress' # setting the parameter for the mesh color coding
simulProp.plotTSJump = 4 # set to plot every four time steps
simulProp.plotVar = ['w', 'lk', 'footprint'
] # setting the parameters that will be plotted
simulProp.tmStpPrefactor = np.asarray(
[[0, 6000], [0.8, 0.4]]) # decreasing the time step pre-factor after 6000s
