def create_widgets(self):
"""creates the display window"""
# CORD2R
#self.origin_label = QLabel("Origin:")
#self.zaxis_label = QLabel("Z Axis:")
#self.xz_plane_label = QLabel("XZ Plane:")
# Z-Axis Projection
self.p1_label = QLabel("Origin:")
self.p3_label = QLabel("End:")
self.p2_label = QLabel("XZ Plane:")
self.p1_label.setToolTip(
'Defines the starting point for the shear, moment, torque plot')
self.p3_label.setToolTip(
'Defines the end point for the shear, moment, torque plot')
self.p2_label.setToolTip('Defines the XZ plane for the shears/moments')
self.zaxis_label = QLabel("Z Axis:")
self.method_pulldown = QComboBox()
for method in self.methods:
self.method_pulldown.addItem(method)
self.zaxis_method_pulldown = QComboBox()
for method in self.zaxis_methods:
self.zaxis_method_pulldown.addItem(method)
self.cid_label = QLabel("Coordinate System:")
self.p1_cid_pulldown = QComboBox()
self.p2_cid_pulldown = QComboBox()
self.p3_cid_pulldown = QComboBox()
self.zaxis_cid_pulldown = QComboBox()
cid_global_str = '0/Global'
for cid in sorted(self.cids):
if cid == 0:
cid_str = cid_global_str
else:
cid_str = str(cid)
#print('cid_str = %r' % cid_str)
self.p1_cid_pulldown.addItem(cid_str)
self.p2_cid_pulldown.addItem(cid_str)
self.p3_cid_pulldown.addItem(cid_str)
self.zaxis_cid_pulldown.addItem(cid_str)
self.p1_cid_pulldown.setCurrentIndex(0)
self.p2_cid_pulldown.setCurrentIndex(0)
self.p3_cid_pulldown.setCurrentIndex(0)
self.zaxis_cid_pulldown.setCurrentIndex(0)
if len(self.cids) == 1:
self.p1_cid_pulldown.setEnabled(False)
self.p2_cid_pulldown.setEnabled(False)
self.p3_cid_pulldown.setEnabled(False)
self.zaxis_cid_pulldown.setEnabled(False)
#self.p1_cid_pulldown.setItemText(0, cid_str)
#self.p2_cid_pulldown.setItemText(0, cid_str)
#self.zaxis_cid_pulldown.setItemText(0, cid_str)
self.p1_cid_pulldown.setToolTip(
'Defines the coordinate system for Point P1')
self.p2_cid_pulldown.setToolTip(
'Defines the coordinate system for Point P2')
self.p3_cid_pulldown.setToolTip(
'Defines the coordinate system for Point P3')
self.zaxis_cid_pulldown.setToolTip(
'Defines the coordinate system for the Z Axis')
self.p1_x_edit = QFloatEdit('')
self.p1_y_edit = QFloatEdit('')
self.p1_z_edit = QFloatEdit('')
self.p2_x_edit = QFloatEdit('')
self.p2_y_edit = QFloatEdit('')
self.p2_z_edit = QFloatEdit('')
self.p3_x_edit = QFloatEdit('')
self.p3_y_edit = QFloatEdit('')
self.p3_z_edit = QFloatEdit('')
self.zaxis_x_edit = QFloatEdit('')
self.zaxis_y_edit = QFloatEdit('')
self.zaxis_z_edit = QFloatEdit('')
self.additional_params_label = QLabel('Plane Parameters:')
self.case_info_label = QLabel('Case Info:')
self.p2_label = QLabel("XZ Plane:")
# Plane Color
self.plane_color_label = QLabel("Plane Color:")
self.plane_color_edit = QPushButtonColor(self.plane_color_int)
self.plane_opacity_label = QLabel("Plane Opacity:")
self.plane_opacity_edit = QDoubleSpinBox()
self.plane_opacity_edit.setRange(0.1, 1.0)
self.plane_opacity_edit.setDecimals(1)
self.plane_opacity_edit.setSingleStep(0.1)
self.plane_opacity_edit.setValue(self.plane_opacity)
self.flip_coord_label = QLabel("Flip Coordinate System:")
self.flip_coord_checkbox = QCheckBox()
#-----------------------------------------------------------------------
self.time_label = QLabel('Time:')
if self.gpforce is None:
times = ['0.', '0.5', '1.', '1.5', '2.']
time = '0.'
else:
times = [func_str(time) for time in self.gpforce._times]
time = times[0]
self.times_pulldown = make_combo_box(times, time)
self.time_label.setEnabled(False)
self.times_pulldown.setEnabled(False)
#self.node_label = QLabel('Nodes:')
#self.node_edit = QNodeEdit(self.win_parent, self.model_name, parent=self.gui,
#pick_style='area', tab_to_next=False)
#self.element_label = QLabel('Elements:')
#self.element_edit = QElementEdit(self.win_parent, self.model_name, parent=self.gui,
#pick_style='area', tab_to_next=False)
#self.node_element_label = QLabel('Nodes/Elements:')
#self.node_element_edit = QLineEdit()
#self.node_element_edit.setReadOnly(True)
self.nplanes_label = QLabel('Num Planes:')
self.nplanes_spinner = QSpinBox()
self.nplanes_spinner.setMinimum(2)
self.nplanes_spinner.setMaximum(500)
self.nplanes_spinner.setValue(20)
#-----------------------------------------------------------------------
self.method_label = QLabel('Method:')
self.plane_label = QLabel('Plane:')
self.location_label = QLabel('Location:')
self.zaxis_method_label = QLabel('Z-Axis Method:')
self.cid_label = QLabel('Coordinate System:')
self.x_label = QLabel('X')
self.y_label = QLabel('Y')
self.z_label = QLabel('Z')
#self.location_label.setAlignment(Qt.AlignCenter)
self.cid_label.setAlignment(Qt.AlignCenter)
self.x_label.setAlignment(Qt.AlignCenter)
self.y_label.setAlignment(Qt.AlignCenter)
self.z_label.setAlignment(Qt.AlignCenter)
self.export_checkbox = QCheckBox()
self.csv_label = QLabel('CSV Filename:')
self.csv_edit = QLineEdit()
self.csv_button = QPushButton('Browse...')
self.csv_label.setEnabled(False)
self.csv_edit.setEnabled(False)
self.csv_button.setEnabled(False)
#-----------------------------------------------------------------------
# nodes
self.add_button = QPushButton('Add')
self.remove_button = QPushButton('Remove')
# elements
self.add2_button = QPushButton('Add')
self.remove2_button = QPushButton('Remove')
#-----------------------------------------------------------------------
# closing
self.apply_button = QPushButton('Apply')
self.cancel_button = QPushButton('Cancel')
self.set_bold_font(self._default_font_size)
def create_widgets(self, show_tol):
"""creates the display window"""
# CORD2R
#self.origin_label = QLabel("Origin:")
#self.zaxis_label = QLabel("Z Axis:")
#self.xz_plane_label = QLabel("XZ Plane:")
# Z-Axis Projection
self.p1_label = QLabel("Origin/P1:")
self.p2_label = QLabel("P2:")
self.p3_label = QLabel("End/P3:")
self.zaxis_label = QLabel("Z Axis:")
self.method_pulldown = QComboBox()
for method in self.methods:
self.method_pulldown.addItem(method)
self.zaxis_method_pulldown = QComboBox()
for method in self.zaxis_methods:
self.zaxis_method_pulldown.addItem(method)
self.cid_label = QLabel("Coordinate System:")
self.p1_cid_pulldown = QComboBox()
self.p2_cid_pulldown = QComboBox()
self.p3_cid_pulldown = QComboBox()
self.zaxis_cid_pulldown = QComboBox()
cid_global_str = '0/Global'
for cid in sorted(self.cids):
if cid == 0:
cid_str = cid_global_str
else:
cid_str = str(cid)
#print('cid_str = %r' % cid_str)
self.p1_cid_pulldown.addItem(cid_str)
self.p2_cid_pulldown.addItem(cid_str)
self.p3_cid_pulldown.addItem(cid_str)
self.zaxis_cid_pulldown.addItem(cid_str)
self.p1_cid_pulldown.setCurrentIndex(0)
self.p2_cid_pulldown.setCurrentIndex(0)
self.p3_cid_pulldown.setCurrentIndex(0)
self.zaxis_cid_pulldown.setCurrentIndex(0)
if len(self.cids) == 1:
self.p1_cid_pulldown.setEnabled(False)
self.p2_cid_pulldown.setEnabled(False)
self.p3_cid_pulldown.setEnabled(False)
self.zaxis_cid_pulldown.setEnabled(False)
#self.p1_cid_pulldown.setItemText(0, cid_str)
#self.p2_cid_pulldown.setItemText(0, cid_str)
#self.zaxis_cid_pulldown.setItemText(0, cid_str)
self.p1_cid_pulldown.setToolTip(
'Defines the coordinate system for Point P1')
self.p2_cid_pulldown.setToolTip(
'Defines the coordinate system for Point P2')
self.p3_cid_pulldown.setToolTip(
'Defines the coordinate system for Point P3')
self.zaxis_cid_pulldown.setToolTip(
'Defines the coordinate system for the Z Axis')
self.p1_x_edit = QLineEdit('')
self.p1_y_edit = QLineEdit('')
self.p1_z_edit = QLineEdit('')
self.p2_x_edit = QLineEdit('')
self.p2_y_edit = QLineEdit('')
self.p2_z_edit = QLineEdit('')
self.p3_x_edit = QLineEdit('')
self.p3_y_edit = QLineEdit('')
self.p3_z_edit = QLineEdit('')
self.zaxis_x_edit = QLineEdit('')
self.zaxis_y_edit = QLineEdit('')
self.zaxis_z_edit = QLineEdit('')
self.ytol_label = QLabel('Y Tolerance:')
self.zero_tol_label = QLabel('Zero Tolerance:')
self.ytol_edit = QLineEdit('10.0')
self.zero_tol_edit = QLineEdit('1e-5')
if not show_tol:
self.ytol_label.setVisible(False)
self.zero_tol_label.setVisible(False)
self.ytol_edit.setVisible(False)
self.zero_tol_edit.setVisible(False)
self.p2_label = QLabel("P2:")
# Plane Color
self.plane_color_label = QLabel("Plane Color:")
self.plane_color_edit = QPushButtonColor(self.plane_color_int)
self.corner_coord_label = QLabel("Show Corner Coordinate System:")
self.corner_coord_checkbox = QCheckBox()
#self.corner_coord_checkbox.setChecked(self._show_corner_coord)
#-----------------------------------------------------------------------
self.load_case_label = QLabel('Load Case:')
load_cases = ['1', '2']
load_case = '1'
self.load_case_pulldown = make_combo_box(load_cases, load_case)
self.time_label = QLabel('Time:')
times = ['0.', '0.5', '1.', '1.5', '2.']
time = '0.'
self.times_pulldown = make_combo_box(times, time)
name = 'main'
self.node_label = QLabel('Nodes:')
#self.node_element_edit =
self.node_edit = QNodeEdit(self.win_parent,
name,
parent=self.gui,
pick_style='area',
tab_to_next=False)
self.element_label = QLabel('Elements:')
self.element_edit = QElementEdit(self.win_parent,
name,
parent=self.gui,
pick_style='area',
tab_to_next=False)
#self.p1_smt_label = QLabel('Point 1 (SMT):')
#self.p2_smt_label = QLabel('Point 2 (SMT):')
self.node_element_label = QLabel('Nodes/Elements:')
self.node_element_edit = QLineEdit()
self.node_element_edit.setReadOnly(True)
self.nplanes_label = QLabel('Num Planes:')
self.nplanes_spinner = QSpinBox()
self.nplanes_spinner.setMinimum(2)
self.nplanes_spinner.setMaximum(100)
self.nplanes_spinner.setValue(20)
#-----------------------------------------------------------------------
self.add_button = QPushButton('Add')
self.remove_button = QPushButton('Remove')
#-----------------------------------------------------------------------
# closing
self.apply_button = QPushButton('Apply')
self.cancel_button = QPushButton('Cancel')