class Test(unittest.TestCase):
def setUp(self):
geometry = Geometry()
surface1 = Surface('surface 1', (20,1.0), scale=2.0)
geometry.surfaces[surface1.name] = surface1
self.case = Case(casename='testCase', mach_no=0.0, symmetry=(0,0,0.0), ref_area=9.0, ref_chord=0.9, ref_span=10.0, ref_cg=(0.5,0.0,0.0), geometry=geometry)
self.test_avl_case = 'ow'
def tearDown(self):
pass
def test_file_write(self):
file = open(self.test_avl_case+'.avl', 'w')
self.case.write_input_file(file)
def test_file_read(self):
file = open(join(runs_dir, self.test_avl_case+'.avl'))
case = Case.case_from_input_file(file)
file.close()
file = open('read_test_write.avl', 'w')
case.write_input_file(file)
file.close()
def test_filter_lines(self):
file = open(join(runs_dir, self.test_avl_case+'.avl'))
lines = filter_lines(file.readlines())
f2 = open('filter_lines.avl', 'w')
f2.write('\n'.join(lines))
f2.close()
file.close()
file = open('filter_test.avl','w')
file.write('\n'.join(lines))
file.close()
def test_file_read(self):
file = open(join(runs_dir, self.test_avl_case + '.avl'))
case = Case.case_from_input_file(file)
file.close()
file = open('read_test_write.avl', 'w')
case.write_input_file(file)
file.close()
def setUp(self):
geometry = Geometry()
surface1 = Surface(name='surface 1', cvortices=[20,1.0], scale=[1.0,1.0,1.0], index=1, yduplicate=1.0)
section1data = SectionAFILEData(filename=join(runs_dir, 'ag42d.dat'))
section1 = Section(type='airfoil data file', data=section1data)
geometry.surfaces.append(surface1)
self.case = Case(name='testCase', mach_no=0.0, symmetry=[0,0,0.0], ref_area=9.0, ref_chord=0.9, ref_span=10.0, ref_cg=[0.5,0.0,0.0], geometry=geometry)
self.test_avl_case = 'allegro'
def setUp(self):
geometry = Geometry()
surface1 = Surface('surface 1', (20, 1.0), scale=2.0)
geometry.surfaces[surface1.name] = surface1
self.case = Case(casename='testCase',
mach_no=0.0,
symmetry=(0, 0, 0.0),
ref_area=9.0,
ref_chord=0.9,
ref_span=10.0,
ref_cg=(0.5, 0.0, 0.0),
geometry=geometry)
self.test_avl_case = 'ow'
class Test(unittest.TestCase):
def setUp(self):
geometry = Geometry()
surface1 = Surface(name='surface 1', cvortices=[20,1.0], scale=[1.0,1.0,1.0], index=1, yduplicate=1.0)
section1data = SectionAFILEData(filename=join(runs_dir, 'ag42d.dat'))
section1 = Section(type='airfoil data file', data=section1data)
geometry.surfaces.append(surface1)
self.case = Case(name='testCase', mach_no=0.0, symmetry=[0,0,0.0], ref_area=9.0, ref_chord=0.9, ref_span=10.0, ref_cg=[0.5,0.0,0.0], geometry=geometry)
self.test_avl_case = 'allegro'
def tearDown(self):
pass
def test_file_write(self):
file = open(self.test_avl_case+'.avl', 'w')
self.case.write_input_file(file)
def test_file_read(self):
file = open(join(runs_dir, self.test_avl_case+'.avl'))
case = Case.case_from_input_file(file)
file.close()
file = open('read_test_write.avl', 'w')
case.write_input_file(file)
file.close()
def test_filter_lines(self):
file = open(join(runs_dir, self.test_avl_case+'.avl'))
lines = filter_lines(file.readlines())
f2 = open('filter_lines.avl', 'w')
f2.write('\n'.join(lines))
f2.close()
file.close()
file = open('filter_test.avl','w')
file.write('\n'.join(lines))
file.close()
def test_ui(self):
file = open(join(runs_dir, self.test_avl_case+'.avl'))
self.case = Case.case_from_input_file(file)
import sys
self.case.configure_traits()
#self.case.geometry.surfaces[0].write_to_file(sys.stdout)
#self.case.geometry.configure_traits()
#self.case.geometry.surfaces[0].configure_traits()
#self.case.geometry.write_to_file(sys.stdout)
from pyavl.ui.geometry_viewer import GeometryViewer
g = GeometryViewer(geometry=self.case.geometry)
g.configure_traits(scrollable=True)
def test_file_read(self):
file = open(join(runs_dir, self.test_avl_case+'.avl'))
case = Case.case_from_input_file(file)
file.close()
file = open('read_test_write.avl', 'w')
case.write_input_file(file)
file.close()
def load_case_from_file(self, filename):
self.avl.sendline('load %s' % filename)
self.case_filename = filename
if os.path.isabs(filename):
f = open(filename)
else:
f = open(os.path.join(self.cwd, filename))
self.case = Case.case_from_input_file(f, cwd=self.cwd)
f.close()
AVL.goto_state(self.avl)
self.populate_runcases()
class Test(unittest.TestCase):
def setUp(self):
geometry = Geometry()
surface1 = Surface('surface 1', (20, 1.0), scale=2.0)
geometry.surfaces[surface1.name] = surface1
self.case = Case(casename='testCase',
mach_no=0.0,
symmetry=(0, 0, 0.0),
ref_area=9.0,
ref_chord=0.9,
ref_span=10.0,
ref_cg=(0.5, 0.0, 0.0),
geometry=geometry)
self.test_avl_case = 'ow'
def tearDown(self):
pass
def test_file_write(self):
file = open(self.test_avl_case + '.avl', 'w')
self.case.write_input_file(file)
def test_file_read(self):
file = open(join(runs_dir, self.test_avl_case + '.avl'))
case = Case.case_from_input_file(file)
file.close()
file = open('read_test_write.avl', 'w')
case.write_input_file(file)
file.close()
def test_filter_lines(self):
file = open(join(runs_dir, self.test_avl_case + '.avl'))
lines = filter_lines(file.readlines())
f2 = open('filter_lines.avl', 'w')
f2.write('\n'.join(lines))
f2.close()
file.close()
file = open('filter_test.avl', 'w')
file.write('\n'.join(lines))
file.close()
def test_ui(self):
file = open(join(runs_dir, self.test_avl_case+'.avl'))
self.case = Case.case_from_input_file(file)
import sys
self.case.configure_traits()
#self.case.geometry.surfaces[0].write_to_file(sys.stdout)
#self.case.geometry.configure_traits()
#self.case.geometry.surfaces[0].configure_traits()
#self.case.geometry.write_to_file(sys.stdout)
from pyavl.ui.geometry_viewer import GeometryViewer
g = GeometryViewer(geometry=self.case.geometry)
g.configure_traits(scrollable=True)
filename = os.path.abspath(filename)
sectiondata.write_airfoil_file(filename, 'parafoil')
if self.number_of_cells%2==1:
le = numpy.zeros((3,))
sectionafile = SectionAFILEData(filename=filename)
sections.append(Section(leading_edge=le, chord=self.chord, type=sectionafile.type, data=sectionafile))
for i, theta in enumerate(anhedral_angle_r * y):
le = numpy.array([0, r * numpy.sin(theta), r * (numpy.cos(theta) - 1)])
sectionafile = SectionAFILEData(filename=filename)
sections.append(Section(leading_edge=le, chord=self.chord, type=sectionafile.type, data=sectionafile))
surface = Surface(name='Parafoil', yduplicate=0, sections=sections)
return surface
traits_view = View('span','chord','number_of_cells','anhedral_angle',
Item('object.sectiondata.filename',label='section data file'),
'inlet_height','cut_angle')
if __name__ == '__main__':
import sys
from pyavl.case import Case
from pyavl import runs_dir, join
file = open(join(runs_dir, 'bd.avl'))
case = Case.case_from_input_file(file)
pw = ParafoilWizard()
pw.configure_traits()
surface = pw.get_surface()
#surface.configure_traits()
geometry = Geometry(surfaces=[surface])
#geometry.configure_traits()
g = GeometryViewer(geometry=geometry)
g.configure_traits()
surface.write_to_file(sys.stdout)
def setUp(self):
geometry = Geometry()
surface1 = Surface('surface 1', (20,1.0), scale=2.0)
geometry.surfaces[surface1.name] = surface1
self.case = Case(casename='testCase', mach_no=0.0, symmetry=(0,0,0.0), ref_area=9.0, ref_chord=0.9, ref_span=10.0, ref_cg=(0.5,0.0,0.0), geometry=geometry)
self.test_avl_case = 'ow'
