def equilibrium_(phase_records: Dict[str, PhaseRecord],
conditions: Dict[v.StateVariable, np.ndarray], grid: LightDataset
) -> LightDataset:
"""
Perform a fast equilibrium calculation with virtually no overhead.
"""
statevars = sorted(get_state_variables(conds=conditions), key=str)
conditions = _adjust_conditions(conditions)
str_conds = OrderedDict([(str(ky), conditions[ky]) for ky in sorted(conditions.keys(), key=str)])
start_point = starting_point(conditions, statevars, phase_records, grid)
return _solve_eq_at_conditions(start_point, phase_records, grid, str_conds, statevars, False)
def map_binary(
dbf,
comps,
phases,
conds,
eq_kwargs=None,
calc_kwargs=None,
boundary_sets=None,
verbose=False,
summary=False,
):
"""
Map a binary T-X phase diagram
Parameters
----------
dbf : Database
comps : list of str
phases : list of str
List of phases to consider in mapping
conds : dict
Dictionary of conditions
eq_kwargs : dict
Dictionary of keyword arguments to pass to equilibrium
verbose : bool
Print verbose output for mapping
boundary_sets : ZPFBoundarySets
Existing ZPFBoundarySets
Returns
-------
ZPFBoundarySets
Notes
-----
Assumes conditions in T and X.
Simple algorithm to map a binary phase diagram in T-X. More or less follows
the algorithm described in Figure 2 by Snider et al. [1] with the small
algorithmic improvement of constructing a convex hull to find the next
potential two phase region.
For each temperature, proceed along increasing composition, skipping two
over two phase regions, once calculated.
[1] J. Snider, I. Griva, X. Sun, M. Emelianenko, Set based framework for
Gibbs energy minimization, Calphad. 48 (2015) 18-26.
doi: 10.1016/j.calphad.2014.09.005
"""
eq_kwargs = eq_kwargs or {}
calc_kwargs = calc_kwargs or {}
# implicitly add v.N to conditions
if v.N not in conds:
conds[v.N] = [1.0]
if 'pdens' not in calc_kwargs:
calc_kwargs['pdens'] = 2000
species = unpack_components(dbf, comps)
phases = filter_phases(dbf, species, phases)
parameters = eq_kwargs.get('parameters', {})
models = eq_kwargs.get('model')
statevars = get_state_variables(models=models, conds=conds)
if models is None:
models = instantiate_models(dbf,
comps,
phases,
model=eq_kwargs.get('model'),
parameters=parameters,
symbols_only=True)
prxs = build_phase_records(dbf,
species,
phases,
conds,
models,
output='GM',
parameters=parameters,
build_gradients=True,
build_hessians=True)
indep_comp = [
key for key, value in conds.items()
if isinstance(key, v.MoleFraction) and len(np.atleast_1d(value)) > 1
]
indep_pot = [
key for key, value in conds.items()
if (type(key) is v.StateVariable) and len(np.atleast_1d(value)) > 1
]
if (len(indep_comp) != 1) or (len(indep_pot) != 1):
raise ValueError(
'Binary map requires exactly one composition and one potential coordinate'
)
if indep_pot[0] != v.T:
raise ValueError(
'Binary map requires that a temperature grid must be defined')
# binary assumption, only one composition specified.
comp_cond = [k for k in conds.keys() if isinstance(k, v.X)][0]
indep_comp = comp_cond.name[2:]
indep_comp_idx = sorted(get_pure_elements(dbf, comps)).index(indep_comp)
composition_grid = unpack_condition(conds[comp_cond])
dX = composition_grid[1] - composition_grid[0]
Xmax = composition_grid.max()
temperature_grid = unpack_condition(conds[v.T])
dT = temperature_grid[1] - temperature_grid[0]
boundary_sets = boundary_sets or ZPFBoundarySets(comps, comp_cond)
equilibria_calculated = 0
equilibrium_time = 0
convex_hulls_calculated = 0
convex_hull_time = 0
curr_conds = {key: unpack_condition(val) for key, val in conds.items()}
str_conds = sorted([str(k) for k in curr_conds.keys()])
grid_conds = _adjust_conditions(curr_conds)
for T_idx in range(temperature_grid.size):
T = temperature_grid[T_idx]
iter_equilibria = 0
if verbose:
print("=== T = {} ===".format(float(T)))
curr_conds[v.T] = [float(T)]
eq_conds = deepcopy(curr_conds)
Xmax_visited = 0.0
hull_time = time.time()
grid = calculate(dbf,
comps,
phases,
fake_points=True,
output='GM',
T=T,
P=grid_conds[v.P],
N=1,
model=models,
parameters=parameters,
to_xarray=False,
**calc_kwargs)
hull = starting_point(eq_conds, statevars, prxs, grid)
convex_hull_time += time.time() - hull_time
convex_hulls_calculated += 1
while Xmax_visited < Xmax:
hull_compsets = find_two_phase_region_compsets(
hull,
T,
indep_comp,
indep_comp_idx,
minimum_composition=Xmax_visited,
misc_gap_tol=2 * dX)
if hull_compsets is None:
if verbose:
print(
"== Convex hull: max visited = {} - no multiphase phase compsets found =="
.format(Xmax_visited, hull_compsets))
break
Xeq = hull_compsets.mean_composition
eq_conds[comp_cond] = [float(Xeq)]
eq_time = time.time()
start_point = starting_point(eq_conds, statevars, prxs, grid)
eq_ds = _solve_eq_at_conditions(species, start_point, prxs, grid,
str_conds, statevars, False)
equilibrium_time += time.time() - eq_time
equilibria_calculated += 1
iter_equilibria += 1
# composition sets in the plane of the calculation:
# even for isopleths, this should always be two.
compsets = get_compsets(eq_ds, indep_comp, indep_comp_idx)
if verbose:
print(
"== Convex hull: max visited = {:0.4f} - hull compsets: {} equilibrium compsets: {} =="
.format(Xmax_visited, hull_compsets, compsets))
if compsets is None:
# equilibrium calculation, didn't find a valid multiphase composition set
# we need to find the next feasible one from the convex hull.
Xmax_visited += dX
continue
else:
boundary_sets.add_compsets(compsets, Xtol=0.10, Ttol=2 * dT)
if compsets.max_composition > Xmax_visited:
Xmax_visited = compsets.max_composition
# this seems kind of sloppy, but captures the effect that we want to
# keep doing equilibrium calculations, if possible.
while Xmax_visited < Xmax and compsets is not None:
eq_conds[comp_cond] = [float(Xmax_visited + dX)]
eq_time = time.time()
# TODO: starting point could be improved by basing it off the previous calculation
start_point = starting_point(eq_conds, statevars, prxs, grid)
eq_ds = _solve_eq_at_conditions(species, start_point, prxs,
grid, str_conds, statevars,
False)
equilibrium_time += time.time() - eq_time
equilibria_calculated += 1
compsets = get_compsets(eq_ds, indep_comp, indep_comp_idx)
if compsets is not None:
Xmax_visited = compsets.max_composition
boundary_sets.add_compsets(compsets,
Xtol=0.10,
Ttol=2 * dT)
else:
Xmax_visited += dX
if verbose:
print("Equilibrium: at X = {:0.4f}, found compsets {}".
format(Xmax_visited, compsets))
if verbose:
print(iter_equilibria, 'equilibria calculated in this iteration.')
if verbose or summary:
print("{} Convex hulls calculated ({:0.1f}s)".format(
convex_hulls_calculated, convex_hull_time))
print("{} Equilbria calculated ({:0.1f}s)".format(
equilibria_calculated, equilibrium_time))
print("{:0.0f}% of brute force calculations skipped".format(
100 * (1 - equilibria_calculated /
(composition_grid.size * temperature_grid.size))))
return boundary_sets
def equilibrium(dbf,
comps,
phases,
conditions,
output=None,
model=None,
verbose=False,
broadcast=True,
calc_opts=None,
to_xarray=True,
scheduler='sync',
parameters=None,
solver=None,
callables=None,
**kwargs):
"""
Calculate the equilibrium state of a system containing the specified
components and phases, under the specified conditions.
Parameters
----------
dbf : Database
Thermodynamic database containing the relevant parameters.
comps : list
Names of components to consider in the calculation.
phases : list or dict
Names of phases to consider in the calculation.
conditions : dict or (list of dict)
StateVariables and their corresponding value.
output : str or list of str, optional
Additional equilibrium model properties (e.g., CPM, HM, etc.) to compute.
These must be defined as attributes in the Model class of each phase.
model : Model, a dict of phase names to Model, or a seq of both, optional
Model class to use for each phase.
verbose : bool, optional
Print details of calculations. Useful for debugging.
broadcast : bool
If True, broadcast conditions against each other. This will compute all combinations.
If False, each condition should be an equal-length list (or single-valued).
Disabling broadcasting is useful for calculating equilibrium at selected conditions,
when those conditions don't comprise a grid.
calc_opts : dict, optional
Keyword arguments to pass to `calculate`, the energy/property calculation routine.
to_xarray : bool
Whether to return an xarray Dataset (True, default) or an EquilibriumResult.
scheduler : Dask scheduler, optional
Job scheduler for performing the computation.
If None, return a Dask graph of the computation instead of actually doing it.
parameters : dict, optional
Maps SymPy Symbol to numbers, for overriding the values of parameters in the Database.
solver : pycalphad.core.solver.SolverBase
Instance of a solver that is used to calculate local equilibria.
Defaults to a pycalphad.core.solver.InteriorPointSolver.
callables : dict, optional
Pre-computed callable functions for equilibrium calculation.
Returns
-------
Structured equilibrium calculation, or Dask graph if scheduler=None.
Examples
--------
None yet.
"""
if not broadcast:
raise NotImplementedError('Broadcasting cannot yet be disabled')
comps = sorted(unpack_components(dbf, comps))
phases = unpack_phases(phases) or sorted(dbf.phases.keys())
list_of_possible_phases = filter_phases(dbf, comps)
if len(list_of_possible_phases) == 0:
raise ConditionError(
'There are no phases in the Database that can be active with components {0}'
.format(comps))
active_phases = {
name: dbf.phases[name]
for name in filter_phases(dbf, comps, phases)
}
if len(active_phases) == 0:
raise ConditionError(
'None of the passed phases ({0}) are active. List of possible phases: {1}.'
.format(phases, list_of_possible_phases))
if isinstance(comps, (str, v.Species)):
comps = [comps]
if len(set(comps) - set(dbf.species)) > 0:
raise EquilibriumError('Components not found in database: {}'.format(
','.join([c.name for c in (set(comps) - set(dbf.species))])))
calc_opts = calc_opts if calc_opts is not None else dict()
solver = solver if solver is not None else InteriorPointSolver(
verbose=verbose)
parameters = parameters if parameters is not None else dict()
if isinstance(parameters, dict):
parameters = OrderedDict(sorted(parameters.items(), key=str))
models = instantiate_models(dbf,
comps,
active_phases,
model=model,
parameters=parameters)
# Temporary solution until constraint system improves
if conditions.get(v.N) is None:
conditions[v.N] = 1
if np.any(np.array(conditions[v.N]) != 1):
raise ConditionError('N!=1 is not yet supported, got N={}'.format(
conditions[v.N]))
# Modify conditions values to be within numerical limits, e.g., X(AL)=0
# Also wrap single-valued conditions with lists
conds = _adjust_conditions(conditions)
for cond in conds.keys():
if isinstance(cond,
(v.Composition,
v.ChemicalPotential)) and cond.species not in comps:
raise ConditionError(
'{} refers to non-existent component'.format(cond))
state_variables = sorted(get_state_variables(models=models, conds=conds),
key=str)
str_conds = OrderedDict((str(key), value) for key, value in conds.items())
components = [x for x in sorted(comps)]
desired_active_pure_elements = [
list(x.constituents.keys()) for x in components
]
desired_active_pure_elements = [
el.upper() for constituents in desired_active_pure_elements
for el in constituents
]
pure_elements = sorted(
set([x for x in desired_active_pure_elements if x != 'VA']))
if verbose:
print('Components:', ' '.join([str(x) for x in comps]))
print('Phases:', end=' ')
output = output if output is not None else 'GM'
output = output if isinstance(output, (list, tuple, set)) else [output]
output = set(output)
output |= {'GM'}
output = sorted(output)
phase_records = build_phase_records(dbf,
comps,
active_phases,
conds,
models,
output='GM',
callables=callables,
parameters=parameters,
verbose=verbose,
build_gradients=True,
build_hessians=True)
if verbose:
print('[done]', end='\n')
# 'calculate' accepts conditions through its keyword arguments
grid_opts = calc_opts.copy()
statevar_strings = [str(x) for x in state_variables]
grid_opts.update({
key: value
for key, value in str_conds.items() if key in statevar_strings
})
if 'pdens' not in grid_opts:
grid_opts['pdens'] = 500
grid = calculate(dbf,
comps,
active_phases,
model=models,
fake_points=True,
callables=callables,
output='GM',
parameters=parameters,
to_xarray=False,
**grid_opts)
coord_dict = str_conds.copy()
coord_dict['vertex'] = np.arange(
len(pure_elements) + 1
) # +1 is to accommodate the degenerate degree of freedom at the invariant reactions
coord_dict['component'] = pure_elements
properties = starting_point(conds, state_variables, phase_records, grid)
properties = _solve_eq_at_conditions(comps,
properties,
phase_records,
grid,
list(str_conds.keys()),
state_variables,
verbose,
solver=solver)
# Compute equilibrium values of any additional user-specified properties
# We already computed these properties so don't recompute them
output = sorted(set(output) - {'GM', 'MU'})
for out in output:
if (out is None) or (len(out) == 0):
continue
# TODO: How do we know if a specified property should be per_phase or not?
# For now, we make a best guess
if (out == 'degree_of_ordering') or (out == 'DOO'):
per_phase = True
else:
per_phase = False
eqcal = _eqcalculate(dbf,
comps,
active_phases,
conditions,
out,
data=properties,
per_phase=per_phase,
model=models,
callables=callables,
parameters=parameters,
**calc_opts)
properties = properties.merge(eqcal, inplace=True, compat='equals')
if to_xarray:
properties = properties.get_dataset()
properties.attrs['created'] = datetime.utcnow().isoformat()
if len(kwargs) > 0:
warnings.warn(
'The following equilibrium keyword arguments were passed, but unused:\n{}'
.format(kwargs))
return properties