class ArmJtag(object):
"""JTAG helper for ARM core"""
def __init__(self, vendor, product, interface):
self.jtag = JtagEngine()
self.jtag.configure(vendor, product, interface)
self.jtag.reset()
def get_idcode_from_reset(self):
"""Read the IDCODE right after a JTAG reset"""
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
print("IDCODE: 0x%x" % int(idcode))
return int(idcode)
def get_idcode_from_instruction(self):
"""Read the IDCODE using the dedicated instruction"""
instruction = JTAG_INSTR["IDCODE"]
self.jtag.write_ir(instruction)
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
revision = idcode[28:32]
partnumber = idcode[12:28]
manufacturer = idcode[1:12]
ieee = idcode[0:1]
print("IDCODE: 0x%x %s %s %s %s" % (int(idcode), revision, partnumber, manufacturer, ieee))
return idcode
def __init__(self, vendor, product, interface):
self.jtag = JtagEngine()
self.jtag.configure(vendor, product, interface)
self.jtag.reset()
class JtagTestCase(TestCase):
def setUp(self):
url = environ.get('FTDI_DEVICE', 'ftdi://ftdi:2232h/1')
self.jtag = JtagEngine(trst=True, frequency=3E6)
self.jtag.configure(url)
self.jtag.reset()
self.tool = JtagTool(self.jtag)
def tearDown(self):
del self.jtag
def test_idcode_reset(self):
"""Read the IDCODE right after a JTAG reset"""
self.jtag.reset()
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
print("IDCODE (reset): 0x%x" % int(idcode))
def test_idcode_sequence(self):
"""Read the IDCODE using the dedicated instruction"""
instruction = JTAG_INSTR['IDCODE']
self.jtag.write_ir(instruction)
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
print("IDCODE (idcode): 0x%08x" % int(idcode))
def test_idcode_shift_register(self):
"""Read the IDCODE using the dedicated instruction with shift_and_update_register"""
instruction = JTAG_INSTR['IDCODE']
self.jtag.change_state('shift_ir')
retval = self.jtag.shift_and_update_register(instruction)
print("retval: 0x%x" % int(retval))
self.jtag.go_idle()
self.jtag.change_state('shift_dr')
idcode = self.jtag.shift_and_update_register(BitSequence('0' * 32))
self.jtag.go_idle()
print("IDCODE (idcode): 0x%08x" % int(idcode))
def test_bypass_shift_register(self):
"""Test the BYPASS instruction using shift_and_update_register"""
instruction = JTAG_INSTR['BYPASS']
self.jtag.change_state('shift_ir')
retval = self.jtag.shift_and_update_register(instruction)
print("retval: 0x%x" % int(retval))
self.jtag.go_idle()
self.jtag.change_state('shift_dr')
_in = BitSequence('011011110000' * 2, length=24)
out = self.jtag.shift_and_update_register(_in)
self.jtag.go_idle()
print(
"BYPASS sent: %s, received: %s (should be left shifted by one)" %
(_in, out))
def _test_detect_ir_length(self):
"""Detect the instruction register length"""
self.jtag.go_idle()
self.jtag.capture_ir()
self.tool.detect_register_size()
def setUp(self):
url = environ.get('FTDI_DEVICE', 'ftdi://ftdi:2232h/1')
self.jtag = JtagEngine(trst=True, frequency=3E6)
self.jtag.configure(url)
self.jtag.reset()
self.tool = JtagTool(self.jtag)
class JtagTestCase(unittest.TestCase):
def setUp(self):
url = environ.get('FTDI_DEVICE', 'ftdi://ftdi:2232h/1')
self.jtag = JtagEngine(trst=True, frequency=3E6)
self.jtag.configure(url)
self.jtag.reset()
self.tool = JtagTool(self.jtag)
def tearDown(self):
del self.jtag
def test_idcode_reset(self):
"""Read the IDCODE right after a JTAG reset"""
self.jtag.reset()
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
print("IDCODE (reset): 0x%x" % int(idcode))
def test_idcode_sequence(self):
"""Read the IDCODE using the dedicated instruction"""
instruction = JTAG_INSTR['IDCODE']
self.jtag.write_ir(instruction)
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
print("IDCODE (idcode): 0x%08x" % int(idcode))
def _test_detect_ir_length(self):
"""Detect the instruction register length"""
self.jtag.go_idle()
self.jtag.capture_ir()
self.tool.detect_register_size()
MAX_WIDTH = 255
def read_pwm():
jtag.write_ir(RD_PWM)
pwm = jtag.read_dr(1)
print("PWM: 0x%x" % int(pwm))
# Define Instructions
IDCODE = BitSequence('00000100', msb=True, length=8)
WR_WIDTH = BitSequence('00000101', msb=True, length=8)
RD_PWM = BitSequence('00000110', msb=True, length=8)
# Initialize
jtag = JtagEngine(frequency=TCK_FREQ)
jtag.configure(FTDI_BOARD)
jtag.reset() # Test Logic Reset (5 times of TMS=1)
# To Shift-IR, Exit1-IR and finally move to UpdateIR
jtag.write_ir(IDCODE)
# Move to Shift-DR, repeat Shift-DR, wait 15ms, and move to Test-Logic Reset
idcode = jtag.read_dr(32)
print("IDCODE (reset): 0x%x" % int(idcode))
width = 0
dir = 1
while True:
jtag.write_ir(WR_WIDTH)
class JtagTestCase(unittest.TestCase):
def setUp(self):
self.jtag = JtagEngine(trst=True, frequency=3E6)
self.jtag.configure(vendor=0x403, product=0x6011, interface=1)
self.jtag.reset()
self.tool = JtagTool(self.jtag)
def tearDown(self):
del self.jtag
def test_idcode_reset(self):
"""Read the IDCODE right after a JTAG reset"""
self.jtag.reset()
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
print "IDCODE (reset): 0x%x" % int(idcode)
def test_idcode_sequence(self):
"""Read the IDCODE using the dedicated instruction"""
instruction = JTAG_INSTR['IDCODE']
self.jtag.write_ir(instruction)
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
print "IDCODE (idcode): 0x%08x" % int(idcode)
def _test_detect_ir_length(self):
"""Detect the instruction register length"""
self.jtag.go_idle()
self.jtag.capture_ir()
self.tool.detect_register_size()
def setUp(self):
self.jtag = JtagEngine(trst=True, frequency=3E6)
self.jtag.configure(vendor=0x403, product=0x6011, interface=1)
self.jtag.reset()
self.tool = JtagTool(self.jtag)
class JtagTestCase(unittest.TestCase):
def setUp(self):
self.jtag = JtagEngine(trst=True, frequency=3E6)
self.jtag.configure(vendor=0x403, product=0x6011, interface=1)
self.jtag.reset()
self.tool = JtagTool(self.jtag)
def tearDown(self):
del self.jtag
def test_idcode_reset(self):
"""Read the IDCODE right after a JTAG reset"""
self.jtag.reset()
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
print_("IDCODE (reset): 0x%x" % int(idcode))
def test_idcode_sequence(self):
"""Read the IDCODE using the dedicated instruction"""
instruction = JTAG_INSTR['IDCODE']
self.jtag.write_ir(instruction)
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
print_("IDCODE (idcode): 0x%08x" % int(idcode))
def _test_detect_ir_length(self):
"""Detect the instruction register length"""
self.jtag.go_idle()
self.jtag.capture_ir()
self.tool.detect_register_size()
def setUp(self):
self.jtag = JtagEngine(trst=True, frequency=3E6)
self.jtag.configure(vendor=0x403, product=0x6011, interface=1)
self.jtag.reset()
self.tool = JtagTool(self.jtag)
self._sm.handle_events(bs)
bs = self._ctrl.writeread(out, use_last=False)
return bs
def loadbinary(filename, startadr):
with open(filename, "rb") as f:
bindata = f.read()
for i in range(len(bindata) // 4):
ocd.writemem(startadr + i * 4,
struct.unpack('<I', bindata[i * 4:(i + 1) * 4])[0])
if __name__ == '__main__':
if (argv[1] == 'f'):
engine = JtagEngine(trst=False, frequency=10E3)
engine.configure('ftdi://olimex:ft2232h/1')
elif (argv[1] == 's'):
ctrl = JtagSimController()
ctrl.configure(7894)
engine = JtagOCDEngine(ctrl)
elif (argv[1] == 'v'):
ctrl = Blaster()
engine = JtagOCDEngine(ctrl)
tool = JtagTool(engine)
time.sleep(1)
engine.reset()
id = tool.idcode()
print("ID:%08x" % id)
engine.go_idle()
def setUp(self):
self.jtag = JtagEngine(trst=True, frequency=3E6)
# New API - example is not compatible with lastest version
self.jtag.configure("ftdi://ftdi:232h/1")
self.jtag.reset()
self.tool = JtagTool(self.jtag)
class JtagUpload(object):
def setUp(self):
self.jtag = JtagEngine(trst=True, frequency=3E6)
# New API - example is not compatible with lastest version
self.jtag.configure("ftdi://ftdi:232h/1")
self.jtag.reset()
self.tool = JtagTool(self.jtag)
def test_idcode_reset(self):
"""Read the IDCODE right after a JTAG reset"""
self.jtag.reset()
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
print("IDCODE (reset): 0x%x" % int(idcode))
def get_idcode(self):
self.jtag.write_ir(JTAG_INSTR['IDCODE'])
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
return idcode
def use_debug_inst(self):
# Use debug instruction
self.jtag.write_ir(JTAG_INSTR['DEBUG'])
# Writing to the Module Select Register
# The top-level module is the simplest of the modules. It does not have a bus
# interface, and has only a single register. This register is called the “module select
# register”, and is used to select the active sub-module. The top module does not use
# command opcodes the way the sub-modules do. Instead, a single bit in the input shift
# register (the MSB) indicates whether the command is a write to the select register, or a
# command to a sub-module (in which case the command is ignored by the top-level). The
# value in the select register cannot be read back.
# The top-level module provides enable signals to all sub-modules, based on the
# value in the module select register. The value of the input shift register is also provided
# to all modules. Finally, the serial TDO output of the ADI is selected from the sub-
# module TDO outputs, based on the module select register. A block diagram of the top-
# level module is shown in Figure 3.
def select_debug_module(self, module):
print("-D- Selecting module {}".format(module))
module = (module & 0x3) | 0x04 # Set MSB (bit 2) to 1
bs = BitSequence(module, msb=True, length=3)
self.jtag.write_dr(bs)
self.jtag.go_idle()
# | Bit# | Access | Description |
# | 52 | W | Top-Level Select - Set to '0' for all sub-module commands |
# | 51:48 | W | Operation code |
# | 47:16 | W | Address The first WishBone address which will be read from or written to |
# | 15:0 | W | Count Total number of words to be transferred. Must be greater than 0. - |
def read_access(self, address):
error = False
bs = BitSequence(1, msb=False, length=16) # Bits 15:0 -> Count=1
bs.append(BitSequence(address, msb=False,
length=32)) # bits 47:16 -> 32-bit Address
bs.append(
BitSequence(ADV_DBG_IF_WB_CMD_BURST_READ_32, msb=False,
length=4)) # Command
bs.append(BitSequence(0, msb=True, length=1)) # Bit 52
self.jtag.write_dr(bs)
# Now shift outputs
self.jtag.change_state('shift_dr')
# Read status bit
seq = self.jtag.read(2)
status = 0
while status == 0:
status = self.jtag.read(1)[0]
data = int(self.jtag.read(32))
crc = int(self.jtag.read(32))
# first word of a burst : crc_in = 0xFFFFFFFF
expected_crc = self.compute_crc(data_in=data,
length_bits=32,
crc_in=0xFFFFFFFF)
if crc != expected_crc:
print(
"-E- CRC error detected Data : {0:#010x}, CRC : {1:#010x} Computed CRC : {2:#010x}"
.format(data, crc, expected_crc))
error = True
self.jtag.go_idle()
return data, error
def write_access(self, address, data):
bs = BitSequence(1, msb=False, length=16) # Bits 15:0 -> Count=1
bs.append(BitSequence(address, msb=False,
length=32)) # bits 47:16 -> 32-bit Address
bs.append(
BitSequence(ADV_DBG_IF_WB_CMD_BURST_WRITE_32, msb=False,
length=4)) # Command
bs.append(BitSequence(0, msb=True, length=1)) # Bit 52
self.jtag.write_dr(bs)
# High-speed mode - no status bit
# Start bit
bs = BitSequence(1, msb=False, length=1)
bs.append(BitSequence(data, msb=False, length=32)) # Data
# first word of a burst : crc_in = 0xFFFFFFFF
crc = self.compute_crc(data_in=data, crc_in=0xFFFFFFFF, length_bits=32)
bs.append(BitSequence(crc, msb=False, length=32)) # CRC
self.jtag.change_state('shift_dr')
self.jtag.write(bs)
match = self.jtag.read(1)
self.jtag.go_idle()
return int(match) == 1
def _do_crc(self, data_in=0, length=0x20):
crc_init = 0xFFFFFFFF
crc_out = 0x0
crc_poly = 0xedb88320
crc_out = crc_init
for i in range(0, length):
if (data_in & (1 << i)) != 0:
d = 0xFFFFFFFF
else:
d = 0x0
if (crc_out & 0x01) != 0:
c = 0xFFFFFFFF
else:
c = 0x0
crc_out = crc_out >> 1
crc_out = crc_out ^ ((d ^ c) & crc_poly)
#print(" crc_out:", hex(crc_out))
return crc_out
def _set_cpuctrl_reg(self, val):
self.write_access(NRV32_CPUCTRL_BASE, val)
def reset_cpu(self):
self._set_cpuctrl_reg(0x1)
def release_cpu(self):
self._set_cpuctrl_reg(0x0)
#define CRC_POLY 0xEDB88320
#uint32_t compute_crc(uint32_t crc_in, uint32_t data_in,int length_bits) {
# uint32_t crc_out, c, d;
# int i;
# crc_out = crc_in;
# for(i = 0; i < length_bits; i++) {
# d = ((data_in >> i) & 0x1) ? 0xffffffff : 0x0;
# c = (crc_out & 0x1) ? 0xffffffff : 0x0;
# crc_out = crc_out >> 1;
# crc_out = crc_out ^ ((d ^ c) & CRC_POLY);
# }
# return crc_out
#}
def compute_crc(self, data_in, length_bits, crc_in):
crc_poly = 0xEDB88320
crc_out = crc_in
for i in range(0, length_bits):
if ((data_in >> i) & 0x1):
d = 0xFFFFFFFF
else:
d = 0
if (crc_out & 0x1):
c = 0xFFFFFFFF
else:
c = 0
crc_out = crc_out >> 1
crc_out = crc_out ^ ((d ^ c) & crc_poly)
return crc_out
def __init__(self, vendor, product, interface):
self.jtag = JtagEngine()
self.jtag.configure(vendor, product, interface)
self.jtag.reset()
class ArmJtag(object):
"""JTAG helper for ARM core"""
def __init__(self, vendor, product, interface):
self.jtag = JtagEngine()
self.jtag.configure(vendor, product, interface)
self.jtag.reset()
def get_idcode_from_reset(self):
"""Read the IDCODE right after a JTAG reset"""
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
print "IDCODE: 0x%x" % int(idcode)
return int(idcode)
def get_idcode_from_instruction(self):
"""Read the IDCODE using the dedicated instruction"""
instruction = JTAG_INSTR['IDCODE']
self.jtag.write_ir(instruction)
idcode = self.jtag.read_dr(32)
self.jtag.go_idle()
revision = idcode[28:32]
partnumber = idcode[12:28]
manufacturer = idcode[1:12]
ieee = idcode[0:1]
print "IDCODE: 0x%x %s %s %s %s" % (int(idcode),
revision, partnumber, manufacturer, ieee)
return idcode
