def ImportSTDF(fname):
with open(fname,'rb') as fin:
p = Parser(inp=fin)
storage = MemoryWriter()
p.addSink(storage)
p.parse()
return storage.data
def process_file(fn):
#filename, = sys.argv[1:]
filename = fn
reopen_fn = None
if filename is None:
f = sys.stdin
elif gzPattern.search(filename):
if not have_gzip:
print >>sys.stderr, "gzip is not supported on this system"
sys.exit(1)
reopen_fn = lambda: gzip.open(filename, 'rb')
f = reopen_fn()
elif bz2Pattern.search(filename):
if not have_bz2:
print >>sys.stderr, "bz2 is not supported on this system"
sys.exit(1)
reopen_fn = lambda: bz2.BZ2File(filename, 'rb')
f = reopen_fn()
else:
f = open(filename, 'rb')
p=Parser(inp=f, reopen_fn=reopen_fn)
p.addSink(AtdfWriter())
p.parse()
f.close()
def process_file(fnames):
filename = fnames
reopen_fn = None
if filename is None:
f = sys.stdin
elif gzPattern.search(filename):
if not have_gzip:
print("gzip is not supported on this system", file=sys.stderr)
sys.exit(1)
reopen_fn = lambda: gzip.open(filename, 'rb')
f = reopen_fn()
elif bz2Pattern.search(filename):
if not have_bz2:
print("bz2 is not supported on this system", file=sys.stderr)
sys.exit(1)
reopen_fn = lambda: bz2.BZ2File(filename, 'rb')
f = reopen_fn()
else:
f = open(filename, 'rb')
p = Parser(inp=f, reopen_fn=reopen_fn)
if len(fnames) < 2:
p.addSink(TextWriter())
p.parse()
else:
with open(fnames + '_.txt', 'w') as fout:
p.addSink(TextWriter(stream=fout))
p.parse()
f.close()
def STDF2Text(fname,delimiter='|'):
""" Convert STDF to a list of text representation
"""
with open(fname,'rb') as fin:
p = Parser(inp=fin)
storage = MemoryWriter()
p.addSink(TextWriter(storage,delimiter=delimiter))
p.parse()
return storage.data
return None
def __init__(self, parent, filename):
f = open(filename, 'rb')
p=Parser(inp=f)
record_mapper = StreamMapper()
p.addSink(record_mapper)
print 'Parsing %s...' % (filename)
p.parse()
print 'Parse complete'
wx.Frame.__init__(self, parent, -1, "Huge (virtual) Table Demo", size=(640,480))
grid = HugeTableGrid(self, record_mapper, f)
grid.SetReadOnly(5,5, True)
def OnMenuFileOpenMenu(self, event):
dlg = wx.FileDialog(self, "Choose a file", ".", "", "*.*")
try:
if dlg.ShowModal() == wx.ID_OK:
filename = dlg.GetPath()
# Set up the mapping parser
self.map_stream = open(filename, 'rb')
parser = Parser(inp=self.map_stream)
self.record_mapper = StreamMapper()
parser.addSink(self.record_mapper)
material_mapper = MaterialMapper()
parser.addSink(material_mapper)
self.recordPositionList.record_mapper = self.record_mapper
self.recordPositionList.material_mapper = material_mapper
# Set up the viewing parser
self.view_stream = open(filename, 'rb')
self.view_parser = Parser(inp=self.view_stream)
self.record_keeper = RecordKeeper()
self.view_parser.addSink(self.record_keeper)
self.view_parser.parse(1)
# Parse the file in a separate thread
self.mapper = MapperThread(self, parser)
finally:
dlg.Destroy()
def __init__(self,
input_path,
output_path,
BinDefinition="",
QSignal=None):
self.packFieldType = {
"C1": self.packStructType,
"B1": self.packStructType,
"U1": self.packStructType,
"U2": self.packStructType,
"U4": self.packStructType,
"U8": self.packStructType,
"I1": self.packStructType,
"I2": self.packStructType,
"I4": self.packStructType,
"I8": self.packStructType,
"R4": self.packStructType,
"R8": self.packStructType,
"Cn": lambda f_type, data: self.packCn(data),
"Bn": lambda f_type, data: self.packBn(data),
"Dn": lambda f_type, data: None, # Dn/Vn not in use
"Vn": lambda f_type, data: None
}
self.outpath = output_path
self.QSignal = QSignal
start = time.time() #
try:
self.stdin = open(input_path, "rb")
self.a = stdfAnalyzer(BinDefinition=BinDefinition, QSignal=QSignal)
self.p = Parser(inp=self.stdin, QSignal=QSignal)
self.p.addSink(self.a)
self.p.parse()
time.sleep(0.51) # wait for the last message
self.fix()
except Exception as e:
if self.QSignal != None:
self.QSignal.message_printer.emit(
'''<span style="color:red"><b>Error occurs:<br>{0!r}</b></span>'''
.format(e))
finally:
end = time.time() #
if self.QSignal != None:
self.QSignal.message_printer.emit("Elapsed time: %.2f sec\n" %
(end - start))
def process_file(filename):
# Open that bad boi up
f = open(filename, 'rb')
reopen_fn = None
# The name of the new file, preserving the directory of the previous
newFile = filename + "_parsed.txt"
# I guess I'm making a parsing object here, but again I didn't write this part
p = Parser(inp=f, reopen_fn=reopen_fn)
startt = time.time() # 9.7s --> TextWriter; 7.15s --> MyTestResultProfiler
# Writing to a text file instead of vomiting it to the console
with open(newFile, 'w') as fout:
# fout writes it to the opened text file
p.addSink(TextWriter(stream=fout))
p.parse()
# We don't need to keep that file open
f.close()
endt = time.time()
print('STDF处理时间：', endt - startt)
def ImportSTDF(fname):
with open(fname, 'rb') as fin:
p = Parser(inp=fin)
storage = MemoryWriter()
p.addSink(storage)
p.parse()
return storage.data
def OnMenuFileOpenMenu(self, event):
dlg = wx.FileDialog(self, "Choose a file", ".", "", "*.*", wx.OPEN)
try:
if dlg.ShowModal() == wx.ID_OK:
filename = dlg.GetPath()
# Set up the mapping parser
self.map_stream = open(filename, 'rb')
parser = Parser(inp=self.map_stream)
self.record_mapper = StreamMapper()
parser.addSink(self.record_mapper)
material_mapper = MaterialMapper()
parser.addSink(material_mapper)
self.recordPositionList.record_mapper = self.record_mapper
self.recordPositionList.material_mapper = material_mapper
# Set up the viewing parser
self.view_stream = open(filename, 'rb')
self.view_parser = Parser(inp=self.view_stream)
self.record_keeper = RecordKeeper()
self.view_parser.addSink(self.record_keeper)
self.view_parser.parse(1)
# Parse the file in a separate thread
self.mapper = MapperThread(self, parser)
finally:
dlg.Destroy()
def process_file(filename):
xmlname = ''
reopen_fn = None
if filename is None:
fin = sys.stdin
fout = sys.stdin
elif gzPattern.search(filename):
if not have_gzip:
print("gzip is not supported on this system", file=sys.stderr)
sys.exit(1)
reopen_fn = lambda: gzip.open(filename, 'rb')
fin = reopen_fn()
elif bz2Pattern.search(filename):
if not have_bz2:
print("bz2 is not supported on this system", file=sys.stderr)
sys.exit(1)
reopen_fn = lambda: bz2.BZ2File(filename, 'rb')
fin = reopen_fn()
else:
fin = open(filename, 'rb')
xmlname = re.sub('\.stdf$', '.xml', filename)
try:
fout = open(xmlname, 'x')
except:
print('XML version of filename already exists')
return xmlname
p = Parser(inp=fin, reopen_fn=reopen_fn)
p.addSink(XmlWriter(fout))
p.parse()
fin.close()
fout.close()
return xmlname
def STDF2Text(fname, delimiter='|'):
""" Convert STDF to a list of text representation
"""
with open(fname, 'rb') as fin:
p = Parser(inp=fin)
storage = MemoryWriter()
p.addSink(TextWriter(storage, delimiter=delimiter))
p.parse()
return storage.data
return None
def to_csv(file_names, output_file_name, notify_progress_bar):
data_summary_all = pd.DataFrame()
for filename in file_names:
# Open std file/s
if filename.endswith(".std") or filename.endswith(".stdf"):
f = open(filename, 'rb')
elif filename.endswith(".gz"):
f = gzip.open(filename, 'rb')
reopen_fn = None
# I guess I'm making a parsing object here, but again I didn't write this part
p = Parser(inp=f, reopen_fn=reopen_fn)
fsize = os.path.getsize(filename)
fname = filename # + "_csv_log.csv"
startt = time.time() # 9.7s --> TextWriter; 7.15s --> MyTestResultProfiler
# Writing to a text file instead of vomiting it to the console
data_summary = MyTestResultProfiler(filename=fname,file=f, filezise = fsize, notify_progress_bar=notify_progress_bar)
p.addSink(data_summary)
p.parse()
endt = time.time()
print('STDF处理时间：', endt - startt)
# data_summary_all = data_summary_all.append(data_summary.frame)
# data_summary_all = pd.concat([data_summary_all,data_summary.frame],sort=False,join='outer')
if data_summary_all.empty:
data_summary_all = data_summary.frame
else:
# data_summary_all = pd.merge(data_summary_all, data_summary.frame, sort=False, how='outer')
data_summary_all = pd.concat([data_summary_all, data_summary.frame], sort=False,
join='outer', ignore_index=True)
# Set multiple level columns for csv table
tname_list = []
tnumber_list = []
hilimit_list = []
lolimit_list = []
unit_vect_nam_list = []
tmplist = data_summary_all.columns.values.tolist()
for i in range(len(tmplist)):
if len(str(tmplist[i]).split('|')) == 1:
tname_list.append('')
tnumber_list.append(str(tmplist[i]).split('|')[0])
hilimit_list.append('')
lolimit_list.append('')
unit_vect_nam_list.append('')
else:
tname_list.append(str(tmplist[i]).split('|')[1])
tnumber_list.append(str(tmplist[i]).split('|')[0])
hilimit_list.append(str(tmplist[i]).split('|')[2])
lolimit_list.append(str(tmplist[i]).split('|')[3])
unit_vect_nam_list.append(str(tmplist[i]).split('|')[4])
data_summary_all.columns = [tname_list, hilimit_list, lolimit_list, unit_vect_nam_list, tnumber_list]
data_summary_all.to_csv(output_file_name + "_csv_log.csv", index=False)
def __init__(self, parent, filename):
f = open(filename, 'rb')
p = Parser(inp=f)
record_mapper = StreamMapper()
p.addSink(record_mapper)
print('Parsing %s...' % (filename))
p.parse()
print('Parse complete')
wx.Frame.__init__(self,
parent,
-1,
"Huge (virtual) Table Demo",
size=(640, 480))
grid = HugeTableGrid(self, record_mapper, f)
grid.SetReadOnly(5, 5, True)
def to_ASCII(filename):
# Open std file/s
if filename.endswith(".std") or filename.endswith(".stdf"):
f = open(filename, 'rb')
elif filename.endswith(".gz"):
f = gzip.open(filename, 'rb')
reopen_fn = None
# I guess I'm making a parsing object here, but again I didn't write this part
p = Parser(inp=f, reopen_fn=reopen_fn)
fname = filename # + "_csv_log.csv"
startt = time.time() # 9.7s --> TextWriter; 7.15s --> MyTestResultProfiler
# Writing to a text file instead of vomiting it to the console
stdf_df = My_STDF_V4_2007_1_Profiler(filename)
p.addSink(stdf_df)
p.parse()
endt = time.time()
print('STDF处理时间：', endt - startt)
stdf_df.all_test_result_pd.to_csv(filename + "_diag_log.csv", index=False)
class MainFrame(wx.Frame):
_custom_classes = {'wx.ListCtrl': ['RecordPositionListCtrl','RecordViewListCtrl']}
def _init_coll_mainSizer_Items(self, parent):
# generated method, don't edit
parent.AddWindow(self.recordPositionList, 1, border=0, flag=0)
parent.AddWindow(self.recordViewList, 2, border=0, flag=0)
def _init_coll_mainMenuBar_Menus(self, parent):
# generated method, don't edit
parent.Append(menu=self.menuFile, title=u'File')
parent.Append(menu=self.menuHelp, title=u'Help')
def _init_coll_menuHelp_Items(self, parent):
# generated method, don't edit
parent.Append(help=u'', id=wxID_MAINFRAMEMENUHELPABOUT,
kind=wx.ITEM_NORMAL, text=u'About')
self.Bind(wx.EVT_MENU, self.OnMenuHelpAboutMenu,
id=wxID_MAINFRAMEMENUHELPABOUT)
def _init_coll_menuFile_Items(self, parent):
# generated method, don't edit
parent.Append(help='', id=wxID_MAINFRAMEMENUFILEOPEN,
kind=wx.ITEM_NORMAL, text=u'Open')
parent.Append(help='', id=wxID_MAINFRAMEMENUFILECLOSE,
kind=wx.ITEM_NORMAL, text=u'Close')
parent.Append(help='', id=wxID_MAINFRAMEMENUFILEEXIT,
kind=wx.ITEM_NORMAL, text=u'Exit')
self.Bind(wx.EVT_MENU, self.OnMenuFileOpenMenu,
id=wxID_MAINFRAMEMENUFILEOPEN)
self.Bind(wx.EVT_MENU, self.OnMenuFileCloseMenu,
id=wxID_MAINFRAMEMENUFILECLOSE)
self.Bind(wx.EVT_MENU, self.OnMenuFileExitMenu,
id=wxID_MAINFRAMEMENUFILEEXIT)
def _init_coll_recordViewList_Columns(self, parent):
# generated method, don't edit
parent.InsertColumn(col=0, format=wx.LIST_FORMAT_LEFT,
heading=u'Field Name', width=-1)
parent.InsertColumn(col=1, format=wx.LIST_FORMAT_LEFT, heading=u'Value',
width=-1)
def _init_coll_recordPositionList_Columns(self, parent):
# generated method, don't edit
parent.InsertColumn(col=0, format=wx.LIST_FORMAT_LEFT,
heading=u'File Offset', width=-1)
parent.InsertColumn(col=1, format=wx.LIST_FORMAT_LEFT,
heading=u'Record Type', width=-1)
parent.InsertColumn(col=2, format=wx.LIST_FORMAT_LEFT,
heading=u'Wafer', width=-1)
parent.InsertColumn(col=3, format=wx.LIST_FORMAT_LEFT,
heading=u'Insertion', width=-1)
parent.InsertColumn(col=4, format=wx.LIST_FORMAT_LEFT,
heading=u'Part', width=-1)
def _init_coll_statusBar_Fields(self, parent):
# generated method, don't edit
parent.SetFieldsCount(1)
parent.SetStatusText(number=0, text=u'Status')
parent.SetStatusWidths([-1])
def _init_sizers(self):
# generated method, don't edit
self.mainSizer = wx.BoxSizer(orient=wx.HORIZONTAL)
self._init_coll_mainSizer_Items(self.mainSizer)
self.SetSizer(self.mainSizer)
def _init_utils(self):
# generated method, don't edit
self.menuFile = wx.Menu(title='')
self.menuHelp = wx.Menu(title='')
self.mainMenuBar = wx.MenuBar()
self._init_coll_menuFile_Items(self.menuFile)
self._init_coll_menuHelp_Items(self.menuHelp)
self._init_coll_mainMenuBar_Menus(self.mainMenuBar)
def _init_ctrls(self, prnt):
# generated method, don't edit
wx.Frame.__init__(self, id=wxID_MAINFRAME, name=u'MainFrame',
parent=prnt, pos=wx.Point(304, 125), size=wx.Size(615, 556),
style=wx.DEFAULT_FRAME_STYLE, title=u'STDF Explorer')
self._init_utils()
self.SetClientSize(wx.Size(607, 527))
self.SetMenuBar(self.mainMenuBar)
self.SetExtraStyle(0)
self.SetStatusBarPane(0)
self.statusBar = wx.StatusBar(id=wxID_MAINFRAMESTATUSBAR,
name=u'statusBar', parent=self, style=0)
self._init_coll_statusBar_Fields(self.statusBar)
self.SetStatusBar(self.statusBar)
self.recordPositionList = RecordPositionListCtrl(id=wxID_MAINFRAMERECORDPOSITIONLIST,
name=u'recordPositionList', parent=self, pos=wx.Point(0, 0),
size=wx.Size(202, 487),
style=wx.LC_REPORT | wx.LC_VIRTUAL | wx.LC_HRULES | wx.LC_VRULES)
self._init_coll_recordPositionList_Columns(self.recordPositionList)
self.recordPositionList.Bind(wx.EVT_LIST_ITEM_SELECTED,
self.OnRecordPositionListListItemSelected,
id=wxID_MAINFRAMERECORDPOSITIONLIST)
self.recordViewList = RecordViewListCtrl(id=wxID_MAINFRAMERECORDVIEWLIST,
name=u'recordViewList', parent=self, pos=wx.Point(202, 0),
size=wx.Size(404, 487),
style=wx.LC_REPORT | wx.LC_VIRTUAL | wx.LC_HRULES | wx.LC_VRULES)
self.recordViewList.SetAutoLayout(False)
self.recordViewList.SetMinSize(wx.Size(404, 487))
self._init_coll_recordViewList_Columns(self.recordViewList)
self._init_sizers()
def __init__(self, parent):
self._init_ctrls(parent)
self.view_stream = None
EVT_MAPPED(self, self.OnMapped)
def OnMenuHelpAboutMenu(self, event):
event.Skip()
def OnMenuFileOpenMenu(self, event):
dlg = wx.FileDialog(self, "Choose a file", ".", "", "*.*", wx.OPEN)
try:
if dlg.ShowModal() == wx.ID_OK:
filename = dlg.GetPath()
# Set up the mapping parser
self.map_stream = open(filename, 'rb')
parser = Parser(inp=self.map_stream)
self.record_mapper = StreamMapper()
parser.addSink(self.record_mapper)
material_mapper = MaterialMapper()
parser.addSink(material_mapper)
self.recordPositionList.record_mapper = self.record_mapper
self.recordPositionList.material_mapper = material_mapper
# Set up the viewing parser
self.view_stream = open(filename, 'rb')
self.view_parser = Parser(inp=self.view_stream)
self.record_keeper = RecordKeeper()
self.view_parser.addSink(self.record_keeper)
self.view_parser.parse(1)
# Parse the file in a separate thread
self.mapper = MapperThread(self, parser)
finally:
dlg.Destroy()
def OnMapped(self, event):
if event.cancelled:
self.statusBar.SetStatusText('%s... Cancelled!' % (
self.statusBar.GetStatusText()))
else:
self.recordPositionList.SetItemCount(
len(self.record_mapper.indexes))
self.statusBar.SetStatusText('%s... Done' % (
self.statusBar.GetStatusText()))
if self.map_stream is not None:
self.map_stream.close()
self.map_stream = None
self.mapper = None
def OnMenuFileCloseMenu(self, event):
self.recordPositionList.record_mapper = None
self.recordPositionList.material_mapper = None
self.view_stream.close()
self.view_stream = None
self.view_parser = None
self.record_mapper = None
self.recordPositionList.SetItemCount(0)
self.recordPositionList.Refresh()
self.recordViewList.SetItemCount(0)
self.recordViewList.Refresh()
if self.mapper:
self.mapper.cancel()
def OnMenuFileExitMenu(self, event):
self.Close()
def OnRecordPositionListListItemSelected(self, event):
if self.record_mapper:
self.view_stream.seek(self.record_mapper.indexes[event.GetIndex()])
self.view_parser.parse(1)
self.recordViewList.record = self.record_keeper.record_type, self.record_keeper.record_data
class MainFrame(wx.Frame):
_custom_classes = {
'wx.ListCtrl': ['RecordPositionListCtrl', 'RecordViewListCtrl']
}
def _init_coll_mainSizer_Items(self, parent):
# generated method, don't edit
parent.Add(self.recordPositionList, 1, border=0, flag=0)
parent.Add(self.recordViewList, 2, border=0, flag=0)
def _init_coll_mainMenuBar_Menus(self, parent):
# generated method, don't edit
parent.Append(menu=self.menuFile, title=u'File')
parent.Append(menu=self.menuHelp, title=u'Help')
def _init_coll_menuHelp_Items(self, parent):
# generated method, don't edit
parent.Append(id=wxID_MAINFRAMEMENUHELPABOUT,
kind=wx.ITEM_NORMAL,
item=u'About')
self.Bind(wx.EVT_MENU,
self.OnMenuHelpAboutMenu,
id=wxID_MAINFRAMEMENUHELPABOUT)
def _init_coll_menuFile_Items(self, parent):
# generated method, don't edit
parent.Append(id=wxID_MAINFRAMEMENUFILEOPEN,
kind=wx.ITEM_NORMAL,
item=u'Open')
parent.Append(id=wxID_MAINFRAMEMENUFILECLOSE,
kind=wx.ITEM_NORMAL,
item=u'Close')
parent.Append(id=wxID_MAINFRAMEMENUFILEEXIT,
kind=wx.ITEM_NORMAL,
item=u'Exit')
self.Bind(wx.EVT_MENU,
self.OnMenuFileOpenMenu,
id=wxID_MAINFRAMEMENUFILEOPEN)
self.Bind(wx.EVT_MENU,
self.OnMenuFileCloseMenu,
id=wxID_MAINFRAMEMENUFILECLOSE)
self.Bind(wx.EVT_MENU,
self.OnMenuFileExitMenu,
id=wxID_MAINFRAMEMENUFILEEXIT)
def _init_coll_recordViewList_Columns(self, parent):
# generated method, don't edit
parent.InsertColumn(col=0,
format=wx.LIST_FORMAT_LEFT,
heading=u'Field Name',
width=-1)
parent.InsertColumn(col=1,
format=wx.LIST_FORMAT_LEFT,
heading=u'Value',
width=-1)
def _init_coll_recordPositionList_Columns(self, parent):
# generated method, don't edit
parent.InsertColumn(col=0,
format=wx.LIST_FORMAT_LEFT,
heading=u'File Offset',
width=-1)
parent.InsertColumn(col=1,
format=wx.LIST_FORMAT_LEFT,
heading=u'Record Type',
width=-1)
parent.InsertColumn(col=2,
format=wx.LIST_FORMAT_LEFT,
heading=u'Wafer',
width=-1)
parent.InsertColumn(col=3,
format=wx.LIST_FORMAT_LEFT,
heading=u'Insertion',
width=-1)
parent.InsertColumn(col=4,
format=wx.LIST_FORMAT_LEFT,
heading=u'Part',
width=-1)
def _init_coll_statusBar_Fields(self, parent):
# generated method, don't edit
parent.SetFieldsCount(1)
parent.SetStatusText(u'Status')
parent.SetStatusWidths([-1])
def _init_sizers(self):
# generated method, don't edit
self.mainSizer = wx.BoxSizer(orient=wx.HORIZONTAL)
self._init_coll_mainSizer_Items(self.mainSizer)
self.SetSizer(self.mainSizer)
def _init_utils(self):
# generated method, don't edit
self.menuFile = wx.Menu(title='')
self.menuHelp = wx.Menu(title='')
self.mainMenuBar = wx.MenuBar()
self._init_coll_menuFile_Items(self.menuFile)
self._init_coll_menuHelp_Items(self.menuHelp)
self._init_coll_mainMenuBar_Menus(self.mainMenuBar)
def _init_ctrls(self, prnt):
# generated method, don't edit
wx.Frame.__init__(self,
id=wxID_MAINFRAME,
name=u'MainFrame',
parent=prnt,
pos=wx.Point(304, 125),
size=wx.Size(615, 556),
style=wx.DEFAULT_FRAME_STYLE,
title=u'STDF Explorer')
self._init_utils()
self.SetClientSize(wx.Size(607, 527))
self.SetMenuBar(self.mainMenuBar)
self.SetExtraStyle(0)
self.SetStatusBarPane(0)
self.statusBar = wx.StatusBar(id=wxID_MAINFRAMESTATUSBAR,
name=u'statusBar',
parent=self,
style=0)
self._init_coll_statusBar_Fields(self.statusBar)
self.SetStatusBar(self.statusBar)
self.recordPositionList = RecordPositionListCtrl(
id=wxID_MAINFRAMERECORDPOSITIONLIST,
name=u'recordPositionList',
parent=self,
pos=wx.Point(0, 0),
size=wx.Size(202, 487),
style=wx.LC_REPORT | wx.LC_VIRTUAL | wx.LC_HRULES | wx.LC_VRULES)
self._init_coll_recordPositionList_Columns(self.recordPositionList)
self.recordPositionList.Bind(wx.EVT_LIST_ITEM_SELECTED,
self.OnRecordPositionListListItemSelected,
id=wxID_MAINFRAMERECORDPOSITIONLIST)
self.recordViewList = RecordViewListCtrl(
id=wxID_MAINFRAMERECORDVIEWLIST,
name=u'recordViewList',
parent=self,
pos=wx.Point(202, 0),
size=wx.Size(404, 487),
style=wx.LC_REPORT | wx.LC_VIRTUAL | wx.LC_HRULES | wx.LC_VRULES)
self.recordViewList.SetAutoLayout(False)
self.recordViewList.SetMinSize(wx.Size(404, 487))
self._init_coll_recordViewList_Columns(self.recordViewList)
self._init_sizers()
def __init__(self, parent):
self._init_ctrls(parent)
self.view_stream = None
EVT_MAPPED(self, self.OnMapped)
def OnMenuHelpAboutMenu(self, event):
event.Skip()
def OnMenuFileOpenMenu(self, event):
dlg = wx.FileDialog(self, "Choose a file", ".", "", "*.*")
try:
if dlg.ShowModal() == wx.ID_OK:
filename = dlg.GetPath()
# Set up the mapping parser
self.map_stream = open(filename, 'rb')
parser = Parser(inp=self.map_stream)
self.record_mapper = StreamMapper()
parser.addSink(self.record_mapper)
material_mapper = MaterialMapper()
parser.addSink(material_mapper)
self.recordPositionList.record_mapper = self.record_mapper
self.recordPositionList.material_mapper = material_mapper
# Set up the viewing parser
self.view_stream = open(filename, 'rb')
self.view_parser = Parser(inp=self.view_stream)
self.record_keeper = RecordKeeper()
self.view_parser.addSink(self.record_keeper)
self.view_parser.parse(1)
# Parse the file in a separate thread
self.mapper = MapperThread(self, parser)
finally:
dlg.Destroy()
def OnMapped(self, event):
if event.cancelled:
self.statusBar.SetStatusText('%s... Cancelled!' %
(self.statusBar.GetStatusText()))
else:
self.recordPositionList.SetItemCount(
len(self.record_mapper.indexes))
self.statusBar.SetStatusText('%s... Done' %
(self.statusBar.GetStatusText()))
if self.map_stream is not None:
self.map_stream.close()
self.map_stream = None
self.mapper = None
def OnMenuFileCloseMenu(self, event):
self.recordPositionList.record_mapper = None
self.recordPositionList.material_mapper = None
self.view_stream.close()
self.view_stream = None
self.view_parser = None
self.record_mapper = None
self.recordPositionList.SetItemCount(0)
self.recordPositionList.Refresh()
self.recordViewList.SetItemCount(0)
self.recordViewList.Refresh()
if self.mapper:
self.mapper.cancel()
def OnMenuFileExitMenu(self, event):
self.Close()
def OnRecordPositionListListItemSelected(self, event):
if self.record_mapper:
self.view_stream.seek(self.record_mapper.indexes[event.GetIndex()])
self.view_parser.parse(1)
self.recordViewList.record = self.record_keeper.record_type, self.record_keeper.record_data
class stdfFixer:
def __init__(self,
input_path,
output_path,
BinDefinition="",
QSignal=None):
self.packFieldType = {
"C1": self.packStructType,
"B1": self.packStructType,
"U1": self.packStructType,
"U2": self.packStructType,
"U4": self.packStructType,
"U8": self.packStructType,
"I1": self.packStructType,
"I2": self.packStructType,
"I4": self.packStructType,
"I8": self.packStructType,
"R4": self.packStructType,
"R8": self.packStructType,
"Cn": lambda f_type, data: self.packCn(data),
"Bn": lambda f_type, data: self.packBn(data),
"Dn": lambda f_type, data: None, # Dn/Vn not in use
"Vn": lambda f_type, data: None
}
self.outpath = output_path
self.QSignal = QSignal
start = time.time() #
try:
self.stdin = open(input_path, "rb")
self.a = stdfAnalyzer(BinDefinition=BinDefinition, QSignal=QSignal)
self.p = Parser(inp=self.stdin, QSignal=QSignal)
self.p.addSink(self.a)
self.p.parse()
time.sleep(0.51) # wait for the last message
self.fix()
except Exception as e:
if self.QSignal != None:
self.QSignal.message_printer.emit(
'''<span style="color:red"><b>Error occurs:<br>{0!r}</b></span>'''
.format(e))
finally:
end = time.time() #
if self.QSignal != None:
self.QSignal.message_printer.emit("Elapsed time: %.2f sec\n" %
(end - start))
def fix(self):
if self.QSignal != None:
self.QSignal.message_printer.emit(
'''<br><span style="color:#3498DB">**{}**</span><br>'''.format(
"Analysis completed, start fixing..."))
self.QSignal.pgbar_setter.emit(0)
MissingRecList = self.a.getMissingRecList()
if not len(MissingRecList) == 0:
byteStream = b''
for i, recs in enumerate(MissingRecList):
if self.QSignal != None:
self.QSignal.message_printer.emit(
'''<span style="color:#3498DB">**{}**</span><br>'''.
format("Generating missing " + recs))
self.QSignal.pgbar_setter.emit(
int(100 * (i + 1) / len(MissingRecList)))
byteStream += self.getBytes(recs)
# write into new file
std_out = open(self.outpath, "wb+")
self.copy_original(std_out)
if self.QSignal != None:
self.QSignal.message_printer.emit(
'''<br><span style="color:#3498DB">**{}**</span><br>'''.
format("Writing missing data"))
std_out.write(byteStream)
std_out.close()
if self.QSignal != None:
self.QSignal.message_printer.emit(
'''<span style="color:green">Fix successfully! The file is located in<br><b><span style="color:#F39C12">{}</span></b></span><br>'''
.format(self.outpath))
self.stdin.close()
def copy_original(self, fout):
if self.QSignal != None:
self.QSignal.pgbar_setter.emit(0) # Init progressBar value
self.p.inp.seek(0)
bytes_per_read = int(1e6) # 1M
FormatSize = lambda num: "%d Bytes" % num if num < 1e3 else (
"%.2f KB" % (num / 1e3)
if num < 1e6 else ("%.2f MB" % (num / 1e6)
if num < 1e9 else "%.2f GB" % (num / 1e9)))
while self.p.inp.tell() < self.a.offset:
bytes_should_read = bytes_per_read if (
self.p.inp.tell() + bytes_per_read < self.a.offset
) else self.a.offset - self.p.inp.tell()
fout.write(self.p.inp.read(bytes_should_read))
if self.QSignal != None:
text = "Copied <b>%s</b>, total <b>%s</b>" % (FormatSize(
fout.tell()), FormatSize(self.a.offset))
self.QSignal.message_printer.emit(text)
self.QSignal.pgbar_setter.emit(
int(100 * fout.tell() / self.a.offset))
def getBytes(self, recs):
if recs == "PRR":
return self.packData(V4.prr, self.a.PRR)
elif recs == "WRR":
return self.packData(V4.wrr, self.a.WRR)
elif recs == "siteSUM":
tmpBytes = b''
for site in sorted(self.a.siteTSR.keys()):
tmpBytes += self.THSP_toBytes(self.a.siteTSR[site],
self.a.siteHBR[site],
self.a.siteSBR[site],
self.a.sitePCR[site])
return tmpBytes
elif recs == "overallSUM":
return self.THSP_toBytes(self.a.sumTSR, self.a.sumHBR,
self.a.sumSBR, self.a.sumPCR)
elif recs == "MRR":
return self.packData(V4.mrr, self.a.MRR)
else:
pass
def THSP_toBytes(self, TSR_dict, HBR_dict, SBR_dict, PCR):
byteOut = b''
for TEST_NUM in sorted(TSR_dict.keys()):
byteOut += self.packData(V4.tsr, TSR_dict[TEST_NUM])
for HBin in sorted(HBR_dict.keys()):
byteOut += self.packData(V4.hbr, HBR_dict[HBin])
for SBin in sorted(SBR_dict.keys()):
byteOut += self.packData(V4.sbr, SBR_dict[SBin])
byteOut += self.packData(V4.pcr, PCR)
return byteOut
def packData(self, recType, Rec_data):
recDataDict = Rec_data.__dict__
rec_byte_data = b''
for field_name, field_type in recType.fieldMap:
if recType == V4.hbr or recType == V4.sbr:
if field_name.startswith("HBIN") or field_name.startswith(
"SBIN"):
field_name = field_name[1:]
rec_byte_data += self.packFieldType[field_type](
field_type, recDataDict[field_name])
rec_byte_len = self.packFieldType["U2"]("U2", len(rec_byte_data))
rec_byte_typ = self.packFieldType["U1"]("U1", recType.typ)
rec_byte_sub = self.packFieldType["U1"]("U1", recType.sub)
return rec_byte_len + rec_byte_typ + rec_byte_sub + rec_byte_data
def packStructType(self, f_type, data):
data = data.encode("ascii") if isinstance(data, str) else data
return struct.pack(self.p.endian + packFormatMap[f_type], data)
def packCn(self, data):
s = struct.pack(self.p.endian + str(len(data)) + "s",
data.encode("ascii"))
l = self.packStructType("U1", len(s))
return l + s
def packBn(self, data):
# Bn is only used in PRR during the fix,
# return default value if PRR needs to be generated
return b''
if rectype in self.indexable_types:
head = rec[rectype.HEAD_NUM]
self.waferid.append(self.getCurrentWafer(head))
self.insertionid.append(self.getCurrentInsertion(head))
if rectype in self.per_part_types:
site = rec[rectype.SITE_NUM]
self.partid.append(self.getCurrentPart(head, site))
else:
self.partid.append(None)
else:
self.waferid.append(None)
self.insertionid.append(None)
self.partid.append(None)
if __name__ == '__main__':
from pystdf.IO import Parser
from pystdf.Writers import AtdfWriter
import pystdf.V4
filename, = sys.argv[1:]
f = open(filename, 'rb')
p = Parser(inp=f)
record_mapper = StreamMapper()
p.addSink(record_mapper)
p.parse()
f.close()
for index, rectype in zip(record_mapper.indexes, record_mapper.types):
print index, rectype
if rectype in self.indexable_types:
head = rec[rectype.HEAD_NUM]
self.waferid.append(self.getCurrentWafer(head))
self.insertionid.append(self.getCurrentInsertion(head))
if rectype in self.per_part_types:
site = rec[rectype.SITE_NUM]
self.partid.append(self.getCurrentPart(head, site))
else:
self.partid.append(None)
else:
self.waferid.append(None)
self.insertionid.append(None)
self.partid.append(None)
if __name__ == '__main__':
from pystdf.IO import Parser
from pystdf.Writers import AtdfWriter
import pystdf.V4
filename, = sys.argv[1:]
f = open(filename, 'rb')
p=Parser(inp=f)
record_mapper = StreamMapper()
p.addSink(record_mapper)
p.parse()
f.close()
for index, rectype in zip(record_mapper.indexes, record_mapper.types):
print index, rectype
