def print_error(self, message, cmd_proc=None):
msg = message
if cmd_proc is not None and \
cmd_proc.vca is not None and \
cmd_proc.vca.response is not None and \
cmd_proc.vca.response.content is not None:
if '<Error xmlns=' in cmd_proc.vca.response.content:
error = parseString(cmd_proc.vca.response.content, True)
msg = message + ': ' + error.get_message()
elif 'message' in cmd_proc.vca.response.content:
json_message = json.loads(cmd_proc.vca.response.content)
msg = message + ': ' + json_message.get('message')
if cmd_proc is not None and \
cmd_proc.vca is not None and \
cmd_proc.vca.vcloud_session is not None and \
cmd_proc.vca.vcloud_session.response is not None and \
cmd_proc.vca.vcloud_session.response.content is not None:
if '<Error xmlns=' in cmd_proc.vca.vcloud_session.response.content:
error = parseString(cmd_proc.vca.vcloud_session.response.
content,
True)
msg = message + ': ' + error.get_message()
elif 'message' in cmd_proc.vca.vcloud_session.response.content:
json_message = json.loads(cmd_proc.vca.vcloud_session.response.
content)
msg = message + ': ' + json_message.get('message')
if cmd_proc is not None and \
cmd_proc.error_message is not None:
msg = message + ': ' + cmd_proc.error_message
self._print(msg, cmd_proc, fg='red')
def display_progress(self, task, cmd_proc=None, headers=None):
progress = task.get_Progress()
status = task.get_status()
rnd = 0
response = None
while status != "success":
if status == "error":
error = task.get_Error()
sys.stdout.write('\r' + ' ' * 120 + '\r')
sys.stdout.flush()
self.print_error(CommonUtils.convertPythonObjToStr(
error, name="Error"),
cmd_proc=cmd_proc)
return None
else:
# some task doesn't not report progress
if progress:
sys.stdout.write("\rprogress : [" + "*" *
int(progress) + " " *
(100 - int(progress - 1)) + "] " +
str(progress) + " %")
else:
sys.stdout.write("\rprogress : ")
if rnd % 4 == 0:
sys.stdout.write(
"[" + "*" * 25 + " " * 75 + "]")
elif rnd % 4 == 1:
sys.stdout.write(
"[" + " " * 25 + "*" * 25 + " " * 50 + "]")
elif rnd % 4 == 2:
sys.stdout.write(
"[" + " " * 50 + "*" * 25 + " " * 25 + "]")
elif rnd % 4 == 3:
sys.stdout.write(
"[" + " " * 75 + "*" * 25 + "]")
rnd += 1
sys.stdout.flush()
time.sleep(1)
response = Http.get(task.get_href(), headers=headers,
verify=cmd_proc.verify,
logger=cmd_proc.logger)
if response.status_code == requests.codes.ok:
task = parseString(response.content, True)
progress = task.get_Progress()
status = task.get_status()
else:
Log.error(cmd_proc.logger, "can't get task")
return
sys.stdout.write("\r" + " " * 120)
sys.stdout.flush()
if response is not None:
if cmd_proc is not None and cmd_proc.json_output:
sys.stdout.write("\r" +
self.task_to_json(response.content) + '\n')
else:
sys.stdout.write("\r" +
self.task_to_table(response.content) + '\n')
sys.stdout.flush()
def print_error(self, message, cmd_proc=None, module=None):
msg = message
if cmd_proc is not None and \
cmd_proc.vca is not None and \
cmd_proc.vca.response is not None and \
cmd_proc.vca.response.content is not None:
if '<Error xmlns=' in cmd_proc.vca.response.content:
error = parseString(cmd_proc.vca.response.content, True)
msg = message + ': ' + error.get_message()
elif 'message' in cmd_proc.vca.response.content and \
'<Error' not in cmd_proc.vca.response.content:
json_message = json.loads(cmd_proc.vca.response.content)
msg = message + ': ' + json_message.get('message')
if cmd_proc is not None and \
cmd_proc.vca is not None and \
cmd_proc.vca.vcloud_session is not None and \
cmd_proc.vca.vcloud_session.response is not None and \
cmd_proc.vca.vcloud_session.response.content is not None:
if '<Error xmlns=' in cmd_proc.vca.vcloud_session.response.content:
error = parseString(cmd_proc.vca.vcloud_session.response.
content,
True)
msg = message + ': ' + error.get_message()
elif 'message' in cmd_proc.vca.vcloud_session.response.content \
and '<Error' not in \
cmd_proc.vca.vcloud_session.response.content:
json_message = json.loads(cmd_proc.vca.vcloud_session.response.
content)
msg = message + ': ' + json_message.get('message')
if cmd_proc is not None and \
cmd_proc.error_message is not None:
msg = message + ': ' + cmd_proc.error_message
if module is not None and \
module.response is not None and \
'message' in module.response.json():
msg = message + ': ' + module.response.json().get('message')
if (msg == 'Not logged in'):
msg += ', try the --insecure flag when using self-signed ' \
'certificates.'
self._print(msg, cmd_proc, fg='red')
def firewall(cmd_proc, operation, vdc, gateway):
"""Operations with Edge Gateway Firewall Service"""
result = cmd_proc.re_login()
if not result:
utils.print_error('Not logged in', cmd_proc)
sys.exit(1)
if vdc is None:
vdc = cmd_proc.vdc_name
the_vdc = cmd_proc.vca.get_vdc(vdc)
if the_vdc is None:
utils.print_error("VDC not found '%s'" % vdc, cmd_proc)
sys.exit(1)
if gateway is None:
gateway = cmd_proc.gateway
the_gateway = cmd_proc.vca.get_gateway(vdc, gateway)
if the_gateway is None:
utils.print_error("gateway not found '%s'" % gateway, cmd_proc)
sys.exit(1)
if 'list' == operation:
headers = [
'Source IP', 'Source Port', 'Destination IP', 'Destination Port',
'Protocol', 'Enabled'
]
table = cmd_proc.firewall_rules_to_table(the_gateway)
if cmd_proc.json_output:
json_object = {'fw-rules': utils.table_to_json(headers, table)}
utils.print_json(json_object, cmd_proc=cmd_proc)
else:
utils.print_table(
"Firewall rules in gateway '%s', "
"VDC '%s', profile '%s':" % (gateway, vdc, cmd_proc.profile),
headers, table, cmd_proc)
elif 'enable' == operation or 'disable' == operation:
utils.print_message("%s firewall" % operation)
the_gateway.enable_fw('enable' == operation)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(
task, cmd_proc,
cmd_proc.vca.vcloud_session.get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error(
"can't '%s' the firewall: " % operation + error.get_message(),
cmd_proc)
sys.exit(1)
cmd_proc.save_current_config()
def firewall(cmd_proc, operation, vdc, gateway):
"""Operations with Edge Gateway Firewall Service"""
result = cmd_proc.re_login()
if not result:
utils.print_error('Not logged in', cmd_proc)
sys.exit(1)
if vdc is None:
vdc = cmd_proc.vdc_name
the_vdc = cmd_proc.vca.get_vdc(vdc)
if the_vdc is None:
utils.print_error("VDC not found '%s'" % vdc, cmd_proc)
sys.exit(1)
if gateway is None:
gateway = cmd_proc.gateway
the_gateway = cmd_proc.vca.get_gateway(vdc, gateway)
if the_gateway is None:
utils.print_error("gateway not found '%s'" % gateway, cmd_proc)
sys.exit(1)
if 'list' == operation:
headers = ['Source IP', 'Source Port', 'Destination IP',
'Destination Port', 'Protocol', 'Enabled']
table = cmd_proc.firewall_rules_to_table(the_gateway)
if cmd_proc.json_output:
json_object = {'fw-rules':
utils.table_to_json(headers, table)}
utils.print_json(json_object, cmd_proc=cmd_proc)
else:
utils.print_table("Firewall rules in gateway '%s', "
"VDC '%s', profile '%s':" %
(gateway, vdc, cmd_proc.profile),
headers, table, cmd_proc)
elif 'enable' == operation or 'disable' == operation:
utils.print_message("%s firewall" % operation)
the_gateway.enable_fw('enable' == operation)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task,
cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't '%s' the firewall: " % operation +
error.get_message(), cmd_proc)
sys.exit(1)
cmd_proc.save_current_config()
def vpn(cmd_proc, operation, vdc, gateway, network_name, public_ip, local_ip,
local_network, peer_ip, peer_network, tunnel, secret):
"""Operations with Edge Gateway VPN"""
result = cmd_proc.re_login()
if not result:
utils.print_error('Not logged in', cmd_proc)
sys.exit(1)
if vdc is None:
vdc = cmd_proc.vdc_name
the_vdc = cmd_proc.vca.get_vdc(vdc)
if the_vdc is None:
utils.print_error("VDC not found '%s'" % vdc, cmd_proc)
sys.exit(1)
if gateway is None:
gateway = cmd_proc.gateway
the_gateway = cmd_proc.vca.get_gateway(vdc, gateway)
if the_gateway is None:
utils.print_error("gateway not found '%s'" % gateway, cmd_proc)
sys.exit(1)
if 'list' == operation:
headers1 = ['EndPoint', 'Public IP']
table1 = cmd_proc.vpn_endpoints_to_table(the_gateway)
headers2 = ['Tunnel', 'Local IP', 'Local Networks', 'Peer IP',
'Peer Networks', 'Enabled', 'Operational']
table2 = cmd_proc.vpn_tunnels_to_table(the_gateway)
if cmd_proc.json_output:
json_object = {'endpoints': table1, 'tunnels': table2}
utils.print_json(json_object, 'VPN config',
cmd_proc)
else:
utils.print_table("VPN endpoints in gateway '%s', "
"VDC '%s', profile '%s':" %
(gateway, vdc, cmd_proc.profile),
headers1, table1, cmd_proc)
utils.print_table("VPN tunnels in gateway '%s', "
"VDC '%s', profile '%s':" %
(gateway, vdc, cmd_proc.profile),
headers2, table2, cmd_proc)
else:
if 'enable' == operation or 'disable' == operation:
utils.print_message("%s VPN service" % operation)
the_gateway.enable_vpn('enable' == operation)
elif 'add-endpoint' == operation:
utils.print_message("add VPN endpoint")
the_gateway.add_vpn_endpoint(network_name, public_ip)
elif 'del-endpoint' == operation:
utils.print_message("delete VPN endpoint")
the_gateway.del_vpn_endpoint(network_name, public_ip)
elif 'add-tunnel' == operation:
utils.print_message("add VPN tunnel")
the_gateway.add_vpn_tunnel(tunnel, local_ip, local_network,
peer_ip, peer_network, secret)
elif 'del-tunnel' == operation:
utils.print_message("delete VPN tunnel")
the_gateway.delete_vpn_tunnel(tunnel)
elif 'add-network' == operation:
utils.print_message("add network to VPN tunnel")
the_gateway.add_network_to_vpn_tunnel(tunnel, local_network,
peer_network)
elif 'del-network' == operation:
utils.print_message("delete network from VPN tunnel")
the_gateway.delete_network_from_vpn_tunnel(tunnel, local_network,
peer_network)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't update VPN configuration: " +
error.get_message(), cmd_proc)
sys.exit(1)
cmd_proc.save_current_config()
def nat(cmd_proc, operation, vdc, gateway, rule_type, original_ip,
original_port, translated_ip, translated_port, protocol,
network_name, nat_rules_file, all_rules):
"""Operations with Edge Gateway NAT Rules"""
result = cmd_proc.re_login()
if not result:
utils.print_error('Not logged in', cmd_proc)
sys.exit(1)
if vdc is None:
vdc = cmd_proc.vdc_name
the_vdc = cmd_proc.vca.get_vdc(vdc)
if the_vdc is None:
utils.print_error("VDC not found '%s'" % vdc, cmd_proc)
sys.exit(1)
if gateway is None:
gateway = cmd_proc.gateway
the_gateway = cmd_proc.vca.get_gateway(vdc, gateway)
if the_gateway is None:
utils.print_error("gateway not found '%s'" % gateway, cmd_proc)
sys.exit(1)
if 'list' == operation:
headers = ["Rule Id", "Enabled", "Type", "Original IP",
"Original Port", "Translated IP", "Translated Port",
"Protocol", "Applied On"]
table = cmd_proc.nat_rules_to_table(the_gateway)
if cmd_proc.json_output:
json_object = {'nat-rules':
utils.table_to_json(headers, table)}
utils.print_json(json_object, cmd_proc=cmd_proc)
else:
utils.print_table("NAT rules in gateway '%s', "
"VDC '%s', profile '%s':" %
(gateway, vdc, cmd_proc.profile),
headers, table, cmd_proc)
elif 'add' == operation:
utils.print_message("add NAT rule")
if nat_rules_file:
rules = yaml.load(nat_rules_file)
if rules and rules[0]:
nat_rules = rules[0].get('NAT_rules')
for rule in nat_rules:
the_gateway.add_nat_rule(rule.get('type').upper(),
rule.get('original_ip'),
rule.get('original_port'),
rule.get('translated_ip'),
rule.get('translated_port'),
rule.get('protocol'),
rule.get('network_name'))
else:
the_gateway.add_nat_rule(rule_type.upper(),
original_ip,
original_port,
translated_ip,
translated_port,
protocol,
network_name)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't add NAT rule: " +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'delete' == operation:
utils.print_message("delete NAT rule")
found_rule = False
if all_rules:
the_gateway.del_all_nat_rules()
found_rule = True
else:
found_rule = the_gateway.del_nat_rule(rule_type.upper(),
original_ip,
original_port,
translated_ip,
translated_port,
protocol,
network_name)
if found_rule:
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't delete NAT rule: " +
error.get_message(), cmd_proc)
sys.exit(1)
else:
utils.print_error("rule doesn't exist in edge gateway", cmd_proc)
sys.exit(1)
cmd_proc.save_current_config()
def dhcp(cmd_proc, operation, vdc, gateway, network_name, pool):
"""Operations with Edge Gateway DHCP Service"""
result = cmd_proc.re_login()
if not result:
utils.print_error('Not logged in', cmd_proc)
sys.exit(1)
if vdc is None:
vdc = cmd_proc.vdc_name
the_vdc = cmd_proc.vca.get_vdc(vdc)
if the_vdc is None:
utils.print_error("VDC not found '%s'" % vdc, cmd_proc)
sys.exit(1)
if gateway is None:
gateway = cmd_proc.gateway
the_gateway = cmd_proc.vca.get_gateway(vdc, gateway)
if the_gateway is None:
utils.print_error("gateway not found '%s'" % gateway, cmd_proc)
sys.exit(1)
if 'list' == operation:
headers = ['Network', 'IP Range From', 'To',
'Enabled', 'Default lease', 'Max Lease']
table = cmd_proc.dhcp_to_table(the_gateway)
if cmd_proc.json_output:
json_object = {'dhcp-pools':
utils.table_to_json(headers, table)}
utils.print_json(json_object, cmd_proc=cmd_proc)
else:
utils.print_table("DHCP pools in gateway '%s', "
"VDC '%s', profile '%s':" %
(gateway, vdc, cmd_proc.profile),
headers, table, cmd_proc)
elif 'add' == operation:
utils.print_message("adding DHCP pool to network '%s'" %
network_name,
cmd_proc)
the_gateway.add_dhcp_pool(network_name, pool.split('-')[0],
pool.split('-')[1], default_lease=None,
max_lease=None)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't add DHCP pool: " +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'delete' == operation:
utils.print_message("deleting all DHCP pools in network '%s'" %
network_name)
the_gateway.delete_dhcp_pool(network_name)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
utils.print_error("can't delete DHCP pool", cmd_proc)
sys.exit(1)
elif 'enable' == operation or 'disable' == operation:
utils.print_message("%s DHCP service" % operation)
the_gateway.enable_dhcp('enable' == operation)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't '%s' the DHCP service: " % operation +
error.get_message(), cmd_proc)
cmd_proc.save_current_config()
def gateway(cmd_proc, operation, vdc, gateway, ip):
"""Operations with Edge Gateway"""
result = cmd_proc.re_login()
if not result:
utils.print_error('Not logged in', cmd_proc)
sys.exit(1)
if vdc is None:
vdc = cmd_proc.vdc_name
the_vdc = cmd_proc.vca.get_vdc(vdc)
if the_vdc is None:
utils.print_error("VDC not found '%s'" % vdc, cmd_proc)
sys.exit(1)
if gateway is None:
gateway = cmd_proc.gateway
the_gateway = cmd_proc.vca.get_gateway(vdc, gateway)
if the_gateway is None:
utils.print_error("gateway not found '%s'" % gateway, cmd_proc)
sys.exit(1)
if 'list' == operation:
headers = ['Name', 'External IPs', 'DHCP', 'Firewall', 'NAT',
'VPN', 'Routed Networks', 'Syslog', 'Uplinks', 'Selected']
gateways = cmd_proc.vca.get_gateways(vdc)
table = cmd_proc.gateways_to_table(gateways)
if cmd_proc.json_output:
json_object = {'gateways':
utils.table_to_json(headers, table)}
utils.print_json(json_object, cmd_proc=cmd_proc)
else:
utils.print_table("Available gateways in '%s', profile '%s':" %
(vdc, cmd_proc.profile),
headers, table, cmd_proc)
elif ('use' == operation or
'info' == operation or
'set-syslog' == operation or
'add-ip' == operation or
'del-ip' == operation):
if 'set-syslog' == operation:
task = the_gateway.set_syslog_conf(ip)
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't set syslog server: " +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'add-ip' == operation:
utils.print_message("allocating public IP for gateway '%s' "
"in VDC '%s'" %
(gateway, vdc), cmd_proc)
task = the_gateway.allocate_public_ip()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't allocate public IP: " +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'del-ip' == operation:
utils.print_message("deallocating public IP '%s' from gateway "
"'%s' in VDC '%s'" %
(ip, gateway, vdc), cmd_proc)
task = the_gateway.deallocate_public_ip(ip)
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't deallocate public IP: " +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'use' == operation:
cmd_proc.gateway = gateway
utils.print_message("Selected gateway '%s'" % gateway, cmd_proc)
elif 'info' == operation:
headers = ['Property', 'Value']
table = cmd_proc.gateway_to_table(the_gateway)
if cmd_proc.json_output:
json_object = {'gateway':
utils.table_to_json(headers, table)}
utils.print_json(json_object, cmd_proc=cmd_proc)
else:
utils.print_table("Details of gateway '%s' in VDC '%s', "
"profile '%s':" %
(gateway, vdc, cmd_proc.profile),
headers, table, cmd_proc)
else:
utils.print_error('not implemented', cmd_proc)
sys.exit(1)
cmd_proc.save_current_config()
def firewall(cmd_proc, operation, vdc, gateway, is_enable, description, policy,
protocol, dest_port, dest_ip, source_port, source_ip,
enable_logging, fw_rules_file):
"""Operations with Edge Gateway Firewall Service"""
def proto(name):
return name[0].upper() + name[1:].lower()
result = cmd_proc.re_login()
if not result:
utils.print_error('Not logged in', cmd_proc)
sys.exit(1)
if vdc is None:
vdc = cmd_proc.vdc_name
the_vdc = cmd_proc.vca.get_vdc(vdc)
if the_vdc is None:
utils.print_error("VDC not found '%s'" % vdc, cmd_proc)
sys.exit(1)
if gateway is None:
gateway = cmd_proc.gateway
the_gateway = cmd_proc.vca.get_gateway(vdc, gateway)
if the_gateway is None:
utils.print_error("gateway not found '%s'" % gateway, cmd_proc)
sys.exit(1)
if 'list' == operation:
headers = ['Description', 'Source IP', 'Source Port', 'Destination IP',
'Destination Port', 'Protocol', 'Enabled']
table = cmd_proc.firewall_rules_to_table(the_gateway)
if cmd_proc.json_output:
json_object = {'fw-rules':
utils.table_to_json(headers, table)}
utils.print_json(json_object, cmd_proc=cmd_proc)
else:
utils.print_table("Firewall rules in gateway '%s', "
"VDC '%s', profile '%s' (firewall is %s):" %
(gateway, vdc, cmd_proc.profile,
'On' if the_gateway.is_fw_enabled()
else 'Off'),
headers, table, cmd_proc)
elif 'enable' == operation or 'disable' == operation:
utils.print_message("%s firewall" % operation)
the_gateway.enable_fw('enable' == operation)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task,
cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't '%s' the firewall: " % operation +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'add' == operation:
utils.print_message("add firewall rule")
if fw_rules_file:
rules = yaml.load(fw_rules_file)
if rules and rules[0]:
fw_rules = rules[0].get('Firewall_rules')
for rule in fw_rules:
# Take defaults for is_enable, policy, protocol and
# enable_logging from cmdline switches (or their defaults)
the_gateway.add_fw_rule(rule.get('is_enable', is_enable),
rule.get('description', None),
rule.get('policy', policy),
proto(
rule.get('protocol', protocol)
),
rule.get('dest_port'),
rule.get('dest_ip'),
rule.get('source_port'),
rule.get('source_ip'),
rule.get('enable_logging',
enable_logging))
else:
the_gateway.add_fw_rule(is_enable, description, policy,
proto(protocol),
dest_port, dest_ip, source_port, source_ip,
enable_logging)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't add firewall rule: " +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'delete' == operation:
utils.print_message("delete firewall rule")
if fw_rules_file:
rules = yaml.load(fw_rules_file)
if rules and rules[0]:
fw_rules = rules[0].get('Firewall_rules')
for rule in fw_rules:
# Take default for protocol cmdline switch (or its default)
the_gateway.delete_fw_rule(proto(
rule.get('protocol', protocol)
),
str(rule.get('dest_port')),
rule.get('dest_ip'),
str(rule.get('source_port')),
rule.get('source_ip'))
else:
the_gateway.delete_fw_rule(proto(protocol), dest_port, dest_ip,
source_port, source_ip)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't delete firewall rule: " +
error.get_message(), cmd_proc)
sys.exit(1)
cmd_proc.save_current_config()
def vpn(cmd_proc, operation, vdc, gateway, network_name, public_ip, local_ip,
local_network, peer_ip, peer_network, tunnel, secret):
"""Operations with Edge Gateway VPN"""
result = cmd_proc.re_login()
if not result:
utils.print_error('Not logged in', cmd_proc)
sys.exit(1)
if vdc is None:
vdc = cmd_proc.vdc_name
the_vdc = cmd_proc.vca.get_vdc(vdc)
if the_vdc is None:
utils.print_error("VDC not found '%s'" % vdc, cmd_proc)
sys.exit(1)
if gateway is None:
gateway = cmd_proc.gateway
the_gateway = cmd_proc.vca.get_gateway(vdc, gateway)
if the_gateway is None:
utils.print_error("gateway not found '%s'" % gateway, cmd_proc)
sys.exit(1)
if 'list' == operation:
headers1 = ['EndPoint', 'Public IP']
table1 = cmd_proc.vpn_endpoints_to_table(the_gateway)
headers2 = ['Tunnel', 'Local IP', 'Local Networks', 'Peer IP',
'Peer Networks', 'Enabled', 'Operational']
table2 = cmd_proc.vpn_tunnels_to_table(the_gateway)
if cmd_proc.json_output:
json_object = {'endpoints': table1, 'tunnels': table2}
utils.print_json(json_object, 'VPN config',
cmd_proc)
else:
utils.print_table("VPN endpoints in gateway '%s', "
"VDC '%s', profile '%s':" %
(gateway, vdc, cmd_proc.profile),
headers1, table1, cmd_proc)
utils.print_table("VPN tunnels in gateway '%s', "
"VDC '%s', profile '%s':" %
(gateway, vdc, cmd_proc.profile),
headers2, table2, cmd_proc)
else:
if 'enable' == operation or 'disable' == operation:
utils.print_message("%s VPN service" % operation)
the_gateway.enable_vpn('enable' == operation)
elif 'add-endpoint' == operation:
utils.print_message("add VPN endpoint")
the_gateway.add_vpn_endpoint(network_name, public_ip)
elif 'del-endpoint' == operation:
utils.print_message("delete VPN endpoint")
the_gateway.del_vpn_endpoint(network_name, public_ip)
elif 'add-tunnel' == operation:
utils.print_message("add VPN tunnel")
the_gateway.add_vpn_tunnel(tunnel, local_ip, local_network,
peer_ip, peer_network, secret)
elif 'del-tunnel' == operation:
utils.print_message("delete VPN tunnel")
the_gateway.delete_vpn_tunnel(tunnel)
elif 'add-network' == operation:
utils.print_message("add network to VPN tunnel")
the_gateway.add_network_to_vpn_tunnel(tunnel, local_network,
peer_network)
elif 'del-network' == operation:
utils.print_message("delete network from VPN tunnel")
the_gateway.delete_network_from_vpn_tunnel(tunnel, local_network,
peer_network)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't update VPN configuration: " +
error.get_message(), cmd_proc)
sys.exit(1)
cmd_proc.save_current_config()
def nat(cmd_proc, operation, vdc, gateway, rule_type, original_ip,
original_port, translated_ip, translated_port, protocol,
network_name, nat_rules_file, all_rules):
"""Operations with Edge Gateway NAT Rules"""
result = cmd_proc.re_login()
if not result:
utils.print_error('Not logged in', cmd_proc)
sys.exit(1)
if vdc is None:
vdc = cmd_proc.vdc_name
the_vdc = cmd_proc.vca.get_vdc(vdc)
if the_vdc is None:
utils.print_error("VDC not found '%s'" % vdc, cmd_proc)
sys.exit(1)
if gateway is None:
gateway = cmd_proc.gateway
the_gateway = cmd_proc.vca.get_gateway(vdc, gateway)
if the_gateway is None:
utils.print_error("gateway not found '%s'" % gateway, cmd_proc)
sys.exit(1)
if 'list' == operation:
headers = ["Rule Id", "Enabled", "Type", "Original IP",
"Original Port", "Translated IP", "Translated Port",
"Protocol", "Applied On"]
table = cmd_proc.nat_rules_to_table(the_gateway)
if cmd_proc.json_output:
json_object = {'nat-rules':
utils.table_to_json(headers, table)}
utils.print_json(json_object, cmd_proc=cmd_proc)
else:
utils.print_table("NAT rules in gateway '%s', "
"VDC '%s', profile '%s':" %
(gateway, vdc, cmd_proc.profile),
headers, table, cmd_proc)
elif 'add' == operation:
utils.print_message("add NAT rule")
if nat_rules_file:
rules = yaml.load(nat_rules_file)
if rules and rules[0]:
nat_rules = rules[0].get('NAT_rules')
for rule in nat_rules:
the_gateway.add_nat_rule(rule.get('type').upper(),
rule.get('original_ip'),
rule.get('original_port'),
rule.get('translated_ip'),
rule.get('translated_port'),
rule.get('protocol'),
rule.get('network_name'))
else:
the_gateway.add_nat_rule(rule_type.upper(),
original_ip,
original_port,
translated_ip,
translated_port,
protocol,
network_name)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't add NAT rule: " +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'delete' == operation:
utils.print_message("delete NAT rule")
found_rule = False
if all_rules:
the_gateway.del_all_nat_rules()
found_rule = True
else:
found_rule = the_gateway.del_nat_rule(rule_type.upper(),
original_ip,
original_port,
translated_ip,
translated_port,
protocol,
network_name)
if found_rule:
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't delete NAT rule: " +
error.get_message(), cmd_proc)
sys.exit(1)
else:
utils.print_error("rule doesn't exist in edge gateway", cmd_proc)
sys.exit(1)
cmd_proc.save_current_config()
def dhcp(cmd_proc, operation, vdc, gateway, network_name, pool):
"""Operations with Edge Gateway DHCP Service"""
result = cmd_proc.re_login()
if not result:
utils.print_error('Not logged in', cmd_proc)
sys.exit(1)
if vdc is None:
vdc = cmd_proc.vdc_name
the_vdc = cmd_proc.vca.get_vdc(vdc)
if the_vdc is None:
utils.print_error("VDC not found '%s'" % vdc, cmd_proc)
sys.exit(1)
if gateway is None:
gateway = cmd_proc.gateway
the_gateway = cmd_proc.vca.get_gateway(vdc, gateway)
if the_gateway is None:
utils.print_error("gateway not found '%s'" % gateway, cmd_proc)
sys.exit(1)
if 'list' == operation:
headers = ['Network', 'IP Range From', 'To',
'Enabled', 'Default lease', 'Max Lease']
table = cmd_proc.dhcp_to_table(the_gateway)
if cmd_proc.json_output:
json_object = {'dhcp-pools':
utils.table_to_json(headers, table)}
utils.print_json(json_object, cmd_proc=cmd_proc)
else:
utils.print_table("DHCP pools in gateway '%s', "
"VDC '%s', profile '%s':" %
(gateway, vdc, cmd_proc.profile),
headers, table, cmd_proc)
elif 'add' == operation:
utils.print_message("adding DHCP pool to network '%s'" %
network_name,
cmd_proc)
the_gateway.add_dhcp_pool(network_name, pool.split('-')[0],
pool.split('-')[1], default_lease=None,
max_lease=None)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't add DHCP pool: " +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'delete' == operation:
utils.print_message("deleting all DHCP pools in network '%s'" %
network_name)
the_gateway.delete_dhcp_pool(network_name)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
utils.print_error("can't delete DHCP pool", cmd_proc)
sys.exit(1)
elif 'enable' == operation or 'disable' == operation:
utils.print_message("%s DHCP service" % operation)
the_gateway.enable_dhcp('enable' == operation)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't '%s' the DHCP service: " % operation +
error.get_message(), cmd_proc)
cmd_proc.save_current_config()
def gateway(cmd_proc, operation, vdc, gateway, ip):
"""Operations with Edge Gateway"""
result = cmd_proc.re_login()
if not result:
utils.print_error('Not logged in', cmd_proc)
sys.exit(1)
if vdc is None:
vdc = cmd_proc.vdc_name
the_vdc = cmd_proc.vca.get_vdc(vdc)
if the_vdc is None:
utils.print_error("VDC not found '%s'" % vdc, cmd_proc)
sys.exit(1)
if gateway is None:
gateway = cmd_proc.gateway
the_gateway = cmd_proc.vca.get_gateway(vdc, gateway)
if the_gateway is None:
utils.print_error("gateway not found '%s'" % gateway, cmd_proc)
sys.exit(1)
if 'list' == operation:
headers = ['Name', 'External IPs', 'DHCP', 'Firewall', 'NAT',
'VPN', 'Routed Networks', 'Syslog', 'Uplinks', 'Selected']
gateways = cmd_proc.vca.get_gateways(vdc)
table = cmd_proc.gateways_to_table(gateways)
if cmd_proc.json_output:
json_object = {'gateways':
utils.table_to_json(headers, table)}
utils.print_json(json_object, cmd_proc=cmd_proc)
else:
utils.print_table("Available gateways in '%s', profile '%s':" %
(vdc, cmd_proc.profile),
headers, table, cmd_proc)
elif ('use' == operation or
'info' == operation or
'set-syslog' == operation or
'add-ip' == operation or
'del-ip' == operation):
if 'set-syslog' == operation:
task = the_gateway.set_syslog_conf(ip)
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't set syslog server: " +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'add-ip' == operation:
utils.print_message("allocating public IP for gateway '%s' "
"in VDC '%s'" %
(gateway, vdc), cmd_proc)
task = the_gateway.allocate_public_ip()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't allocate public IP: " +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'del-ip' == operation:
utils.print_message("deallocating public IP '%s' from gateway "
"'%s' in VDC '%s'" %
(ip, gateway, vdc), cmd_proc)
task = the_gateway.deallocate_public_ip(ip)
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't deallocate public IP: " +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'use' == operation:
cmd_proc.gateway = gateway
utils.print_message("Selected gateway '%s'" % gateway, cmd_proc)
elif 'info' == operation:
headers = ['Property', 'Value']
table = cmd_proc.gateway_to_table(the_gateway)
if cmd_proc.json_output:
json_object = {'gateway':
utils.table_to_json(headers, table)}
utils.print_json(json_object, cmd_proc=cmd_proc)
else:
utils.print_table("Details of gateway '%s' in VDC '%s', "
"profile '%s':" %
(gateway, vdc, cmd_proc.profile),
headers, table, cmd_proc)
else:
utils.print_error('not implemented', cmd_proc)
sys.exit(1)
cmd_proc.save_current_config()
def firewall(cmd_proc, operation, vdc, gateway, is_enable, description, policy,
protocol, dest_port, dest_ip, source_port, source_ip,
enable_logging, fw_rules_file):
"""Operations with Edge Gateway Firewall Service"""
def proto(name):
return name[0].upper() + name[1:].lower()
result = cmd_proc.re_login()
if not result:
utils.print_error('Not logged in', cmd_proc)
sys.exit(1)
if vdc is None:
vdc = cmd_proc.vdc_name
the_vdc = cmd_proc.vca.get_vdc(vdc)
if the_vdc is None:
utils.print_error("VDC not found '%s'" % vdc, cmd_proc)
sys.exit(1)
if gateway is None:
gateway = cmd_proc.gateway
the_gateway = cmd_proc.vca.get_gateway(vdc, gateway)
if the_gateway is None:
utils.print_error("gateway not found '%s'" % gateway, cmd_proc)
sys.exit(1)
if 'list' == operation:
headers = ['Source IP', 'Source Port', 'Destination IP',
'Destination Port', 'Protocol', 'Enabled']
table = cmd_proc.firewall_rules_to_table(the_gateway)
if cmd_proc.json_output:
json_object = {'fw-rules':
utils.table_to_json(headers, table)}
utils.print_json(json_object, cmd_proc=cmd_proc)
else:
utils.print_table("Firewall rules in gateway '%s', "
"VDC '%s', profile '%s':" %
(gateway, vdc, cmd_proc.profile),
headers, table, cmd_proc)
elif 'enable' == operation or 'disable' == operation:
utils.print_message("%s firewall" % operation)
the_gateway.enable_fw('enable' == operation)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task,
cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't '%s' the firewall: " % operation +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'add' == operation:
utils.print_message("add firewall rule")
if fw_rules_file:
rules = yaml.load(fw_rules_file)
if rules and rules[0]:
fw_rules = rules[0].get('Firewall_rules')
for rule in fw_rules:
# Take defaults for is_enable, policy, protocol and
# enable_logging from cmdline switches (or their defaults)
the_gateway.add_fw_rule(rule.get('is_enable', is_enable),
rule.get('description', None),
rule.get('policy', policy),
proto(
rule.get('protocol', protocol)
),
rule.get('dest_port'),
rule.get('dest_ip'),
rule.get('source_port'),
rule.get('source_ip'),
rule.get('enable_logging',
enable_logging))
else:
the_gateway.add_fw_rule(is_enable, description, policy,
proto(protocol),
dest_port, dest_ip, source_port, source_ip,
enable_logging)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't add firewall rule: " +
error.get_message(), cmd_proc)
sys.exit(1)
elif 'delete' == operation:
utils.print_message("delete firewall rule")
if fw_rules_file:
rules = yaml.load(fw_rules_file)
if rules and rules[0]:
fw_rules = rules[0].get('Firewall_rules')
for rule in fw_rules:
# Take default for protocol cmdline switch (or its default)
the_gateway.delete_fw_rule(proto(
rule.get('protocol', protocol)
),
str(rule.get('dest_port')),
rule.get('dest_ip'),
str(rule.get('source_port')),
rule.get('source_ip'))
else:
the_gateway.delete_fw_rule(proto(protocol), dest_port, dest_ip,
source_port, source_ip)
task = the_gateway.save_services_configuration()
if task:
utils.display_progress(task, cmd_proc,
cmd_proc.vca.vcloud_session.
get_vcloud_headers())
else:
error = parseString(the_gateway.response.content, True)
utils.print_error("can't delete firewall rule: " +
error.get_message(), cmd_proc)
sys.exit(1)
cmd_proc.save_current_config()
