def test_with_nonstorage_load(self, model):
""" Test load from dict with 'storage_node' key. """
m = model
m.scenarios.setup()
s = Storage(m, 'Storage', max_volume=100.0)
l = Link(m, 'Link')
data = {
"type": "controlcurve",
"control_curve": 0.8,
"values": [10.0, 0.0],
"storage_node": "Storage"
}
l.cost = p = load_parameter(model, data)
assert isinstance(p, ControlCurveParameter)
s.setup(m) # Init memory view on storage (bypasses usual `Model.setup`)
si = ScenarioIndex(0, np.array([0], dtype=np.int32))
print(s.volume)
assert_allclose(l.get_cost(m.timestepper.current, si), 0.0)
# When storage volume changes, the cost of the link changes.
s.initial_volume = 90.0
m.reset()
assert_allclose(l.get_cost(m.timestepper.current, si), 10.0)
def simple_storage_model(request, solver):
"""
Make a simple model with a single Input, Storage and Output.
Input -> Storage -> Output
"""
model = pywr.core.Model(start=pandas.to_datetime('2016-01-01'),
end=pandas.to_datetime('2016-01-05'),
timestep=datetime.timedelta(1),
solver=solver)
inpt = Input(model, name="Input", max_flow=5.0, cost=-1)
res = Storage(model,
name="Storage",
num_outputs=1,
num_inputs=1,
max_volume=20,
initial_volume=10)
otpt = Output(model, name="Output", max_flow=8, cost=-999)
inpt.connect(res)
res.connect(otpt)
return model
def test_daily_profile_control_curve(simple_linear_model):
""" Test `DailyProfileControlCurveParameter` """
model = simple_linear_model
s = Storage(model, 'Storage', max_volume=100.0)
l = Link(model, 'Link2')
data = {
'type': 'dailyprofilecontrolcurve',
'control_curves': [0.8, 0.6],
'values': [[1.0] * 366, [0.7] * np.arange(366), [0.3] * 366],
'storage_node': 'Storage'
}
l.max_flow = p = load_parameter(model, data)
model.setup()
@assert_rec(model, p)
def expected_func(timestep, scenario_index):
v = s.initial_volume
doy = timestep.dayofyear
if v >= 80.0:
expected = 1.0
elif v >= 60:
expected = 0.7 * (doy - 1)
else:
expected = 0.3
return expected
for initial_volume in (90, 70, 30):
s.initial_volume = initial_volume
model.run()
def test_scenario_storage():
"""Test the behaviour of Storage nodes with multiple scenarios
The model defined has two inflow scenarios: 5 and 10. It is expected that
the volume in the storage node should increase at different rates in the
two scenarios.
"""
model = Model()
i = Input(model, 'input', max_flow=999)
s = Storage(model, 'storage', num_inputs=1, num_outputs=1, max_volume=1000, initial_volume=500)
o = Output(model, 'output', max_flow=999)
scenario_input = Scenario(model, 'Inflow', size=2)
i.min_flow = ConstantScenarioParameter(model, scenario_input, [5.0, 10.0])
i.connect(s)
s.connect(o)
s_rec = NumpyArrayStorageRecorder(model, s)
model.run()
assert_allclose(i.flow, [5, 10])
assert_allclose(s_rec.data[0], [505, 510])
assert_allclose(s_rec.data[1], [510, 520])
def test_with_values(self, model):
"""Test with `values` keyword argument"""
m = model
s = Storage(m, 'Storage', max_volume=100.0)
# Return 10.0 when above 0.0 when below
s.cost = ControlCurveParameter(s, [0.8, 0.6], [1.0, 0.7, 0.4])
self._assert_results(m, s)
def test_single_cc_load(self, model):
""" Test load from dict with 'control_curve' key
This is different to the above test by using singular 'control_curve' key in the dict
"""
m = model
m.scenarios.setup()
s = Storage(m, 'Storage', max_volume=100.0)
data = {
"type": "controlcurve",
"storage_node": "Storage",
"control_curve": 0.8,
}
s.cost = p = load_parameter(model, data)
assert isinstance(p, ControlCurveParameter)
s.setup(m) # Init memory view on storage (bypasses usual `Model.setup`)
si = ScenarioIndex(0, np.array([0], dtype=np.int32))
s.initial_volume = 90.0
m.reset()
assert_allclose(s.get_cost(m.timestepper.current, si), 0)
s.initial_volume = 70.0
m.reset()
assert_allclose(s.get_cost(m.timestepper.current, si), 1)
def test_with_parameters(self, model):
""" Test with `parameters` keyword argument. """
m = model
s = Storage(m, 'Storage', max_volume=100.0)
# Two different control curves
cc = [ConstantParameter(0.8), ConstantParameter(0.6)]
# Three different parameters to return
params = [
ConstantParameter(1.0), ConstantParameter(0.7), ConstantParameter(0.4)
]
s.cost = ControlCurveParameter(s, cc, parameters=params)
self._assert_results(m, s)
def three_storage_model(request):
"""
Make a simple model with three input, storage and output nodes. Also adds
an `AggregatedStorage` and `AggregatedNode`.
Input 0 -> Storage 0 -> Output 0
Input 1 -> Storage 1 -> Output 1
Input 2 -> Storage 2 -> Output 2
"""
model = pywr.core.Model(
start=pandas.to_datetime('2016-01-01'),
end=pandas.to_datetime('2016-01-05'),
timestep=datetime.timedelta(1),
)
all_res = []
all_otpt = []
for num in range(3):
inpt = Input(model,
name="Input {}".format(num),
max_flow=5.0 * num,
cost=-1)
res = Storage(model,
name="Storage {}".format(num),
num_outputs=1,
num_inputs=1,
max_volume=20,
initial_volume=10 + num)
otpt = Output(model,
name="Output {}".format(num),
max_flow=8 + num,
cost=-999)
inpt.connect(res)
res.connect(otpt)
all_res.append(res)
all_otpt.append(otpt)
AggregatedStorage(model, name='Total Storage', storage_nodes=all_res)
AggregatedNode(model, name='Total Output', nodes=all_otpt)
return model
def test_scaled_profile_nested_load(model):
""" Test `ScaledProfileParameter` loading with `AggregatedParameter` """
model.timestepper.delta = 15
s = Storage(model, 'Storage', max_volume=100.0, num_outputs=0)
d = Output(model, 'Link')
data = {
'type': 'scaledprofile',
'scale': 50.0,
'profile': {
'type':
'aggregated',
'agg_func':
'product',
'parameters': [{
'type': 'monthlyprofile',
'values': [0.5] * 12
}, {
'type':
'monthlyprofilecontrolcurve',
'control_curves': [0.8, 0.6],
'values': [[1.0] * 12, [0.7] * np.arange(12), [0.3] * 12],
'storage_node':
'Storage'
}]
}
}
s.connect(d)
d.max_flow = p = load_parameter(model, data)
@assert_rec(model, p)
def expected_func(timestep, scenario_index):
if s.initial_volume == 90:
return 50.0 * 0.5 * 1.0
elif s.initial_volume == 70:
return 50.0 * 0.5 * 0.7 * (timestep.month - 1)
else:
return 50.0 * 0.5 * 0.3
for initial_volume in (90, 70, 30):
s.initial_volume = initial_volume
model.run()
def test_scaled_profile_nested_load(model):
""" Test `ScaledProfileParameter` loading with `AggregatedParameter` """
s = Storage(model, 'Storage', max_volume=100.0)
l = Link(model, 'Link')
data = {
'type': 'scaledprofile',
'scale': 50.0,
'profile': {
'type':
'aggregated',
'agg_func':
'product',
'parameters': [{
'type': 'monthlyprofile',
'values': [0.5] * 12
}, {
'type':
'monthlyprofilecontrolcurve',
'control_curves': [0.8, 0.6],
'values': [[1.0] * 12, [0.7] * np.arange(12), [0.3] * 12],
'storage_node':
'Storage'
}]
}
}
l.max_flow = p = load_parameter(model, data)
p.setup(model)
# Test correct aggregation is performed
model.scenarios.setup()
s.setup(
model) # Init memory view on storage (bypasses usual `Model.setup`)
s.initial_volume = 90.0
model.reset() # Set initial volume on storage
si = ScenarioIndex(0, np.array([0], dtype=np.int32))
for mth in range(1, 13):
ts = Timestep(datetime.datetime(2016, mth, 1), 366, 1.0)
np.testing.assert_allclose(p.value(ts, si), 50.0 * 0.5 * 1.0)
s.initial_volume = 70.0
model.reset() # Set initial volume on storage
si = ScenarioIndex(0, np.array([0], dtype=np.int32))
for mth in range(1, 13):
ts = Timestep(datetime.datetime(2016, mth, 1), 366, 1.0)
np.testing.assert_allclose(p.value(ts, si),
50.0 * 0.5 * 0.7 * (mth - 1))
s.initial_volume = 30.0
model.reset() # Set initial volume on storage
si = ScenarioIndex(0, np.array([0], dtype=np.int32))
for mth in range(1, 13):
ts = Timestep(datetime.datetime(2016, mth, 1), 366, 1.0)
np.testing.assert_allclose(p.value(ts, si), 50.0 * 0.5 * 0.3)
def test_with_nonstorage(self, model):
""" Test usage on non-`Storage` node. """
# Now test if the parameter is used on a non storage node
m = model
m.scenarios.setup()
s = Storage(m, 'Storage', max_volume=100.0)
l = Link(m, 'Link')
cc = ConstantParameter(0.8)
l.cost = ControlCurveParameter(s, cc, [10.0, 0.0])
s.setup(m) # Init memory view on storage (bypasses usual `Model.setup`)
print(s.volume)
si = ScenarioIndex(0, np.array([0], dtype=np.int32))
assert_allclose(l.get_cost(m.timestepper.current, si), 0.0)
# When storage volume changes, the cost of the link changes.
s.initial_volume = 90.0
m.reset()
print(s.volume)
assert_allclose(l.get_cost(m.timestepper.current, si), 10.0)
def test_scaled_profile_nested_load(model):
""" Test `ScaledProfileParameter` loading with `AggregatedParameter` """
model.timestepper.delta = 15
s = Storage(model,
'Storage',
max_volume=100.0,
initial_volume=50.0,
num_outputs=0)
d = Output(model, 'Link')
data = {
'type': 'scaledprofile',
'scale': 50.0,
'profile': {
'type':
'aggregated',
'agg_func':
'product',
'parameters': [{
'type': 'monthlyprofile',
'values': [0.5] * 12
}, {
'type': 'constant',
'value': 1.5,
}]
}
}
s.connect(d)
d.max_flow = p = load_parameter(model, data)
@assert_rec(model, p)
def expected_func(timestep, scenario_index):
return 50.0 * 0.5 * 1.5
model.run()
def test_no_scale_no_profile(self, simple_linear_model):
""" No scale or profile specified """
model = simple_linear_model
s = Storage(model, 'Storage', max_volume=100.0)
l = Link(model, 'Link2')
data = {
'type': 'monthlyprofilecontrolcurve',
'control_curves': [0.8, 0.6],
'values': [[1.0] * 12, [0.7] * np.arange(12), [0.3] * 12],
'storage_node': 'Storage'
}
l.max_flow = p = load_parameter(model, data)
self._assert_results(model, s, p)
def test_values_load(self, model):
""" Test load of float lists. """
m = model
s = Storage(m, 'Storage', max_volume=100.0)
data = {
"type": "controlcurve",
"control_curves": [0.8, 0.6],
"values": [1.0, 0.7, 0.4],
"storage_node": "Storage"
}
s.cost = p = load_parameter(model, data)
assert isinstance(p, ControlCurveParameter)
self._assert_results(m, s)
def test_scale_no_profile(self, simple_linear_model):
""" Test `MonthlyProfileControlCurveParameter` """
model = simple_linear_model
s = Storage(model, 'Storage', max_volume=100.0)
l = Link(model, 'Link2')
data = {
'type': 'monthlyprofilecontrolcurve',
'control_curves': [0.8, 0.6],
'values': [[1.0] * 12, [0.7] * np.arange(12), [0.3] * 12],
'storage_node': 'Storage',
'scale': 1.5
}
l.max_flow = p = load_parameter(model, data)
model.setup()
self._assert_results(model, s, p, scale=1.5)
def test_no_scale_profile(self, model):
""" No scale, but profile array specified """
s = Storage(model, 'Storage', max_volume=100.0)
l = Link(model, 'Link')
data = {
'type': 'monthlyprofilecontrolcurve',
'control_curves': [0.8, 0.6],
'values': [[1.0] * 12, [0.7] * np.arange(12), [0.3] * 12],
'storage_node': 'Storage',
'profile': [1.5]*12
}
l.max_flow = p = load_parameter(model, data)
p.setup(model)
model.scenarios.setup()
self._assert_results(model, s, p, scale=1.5)
def test_daily_profile_control_curve(model):
""" Test `DailyProfileControlCurveParameter` """
s = Storage(model, 'Storage', max_volume=100.0)
l = Link(model, 'Link')
data = {
'type': 'dailyprofilecontrolcurve',
'control_curves': [0.8, 0.6],
'values': [[1.0]*366, [0.7]*np.arange(366), [0.3]*366],
'storage_node': 'Storage'
}
l.max_flow = p = load_parameter(model, data)
p.setup(model)
# Test correct aggregation is performed
model.scenarios.setup()
s.setup(model) # Init memory view on storage (bypasses usual `Model.setup`)
s.initial_volume = 90.0
model.reset() # Set initial volume on storage
si = ScenarioIndex(0, np.array([0], dtype=np.int32))
for mth in range(1, 13):
ts = Timestep(datetime.datetime(2016, mth, 1), 366, 1.0)
np.testing.assert_allclose(p.value(ts, si), 1.0)
s.initial_volume = 70.0
model.reset() # Set initial volume on storage
si = ScenarioIndex(0, np.array([0], dtype=np.int32))
for mth in range(1, 13):
ts = Timestep(datetime.datetime(2016, mth, 1), 366, 1.0)
doy = ts.datetime.dayofyear
np.testing.assert_allclose(p.value(ts, si), 0.7*(doy - 1))
s.initial_volume = 30.0
model.reset() # Set initial volume on storage
si = ScenarioIndex(0, np.array([0], dtype=np.int32))
for mth in range(1, 13):
ts = Timestep(datetime.datetime(2016, mth, 1), 366, 1.0)
np.testing.assert_allclose(p.value(ts, si), 0.3)
def test_parameters_load(self, model):
""" Test load of parameter lists for 'control_curves' and 'parameters' keys. """
m = model
s = Storage(m, 'Storage', max_volume=100.0)
data = {
"type": "controlcurve",
"storage_node": "Storage",
"control_curves": [
{
"type": "constant",
"value": 0.8
},
{
"type": "monthlyprofile",
"values": [0.6]*12
}
],
"parameters": [
{
"type": "constant",
"value": 1.0,
},
{
"type": "constant",
"value": 0.7
},
{
"type": "constant",
"value": 0.4
}
]
}
s.cost = p = load_parameter(model, data)
assert isinstance(p, ControlCurveParameter)
self._assert_results(m, s)
# separate non_storage dicts for greater flexibility with recording model results
storage = {}
non_storage = {}
non_storage_outputs = {}
non_storage_junctions = {}
non_storage_inputs = {}
non_storage_types = input_types + output_types + misc_types
for node_id, node_trait in node_lookup_id.items():
types = node_trait['type']
name = node_trait['name']
if types in storage_types:
num_outputs = node_trait['connect_in']
num_inputs = node_trait['connect_out']
storage[node_id] = Storage(model,
name=name,
num_outputs=num_outputs,
num_inputs=num_inputs)
elif types in output_types:
non_storage_outputs[node_id] = Output(model, name=name)
elif types in misc_types:
non_storage_junctions[node_id] = Link(model, name=name)
elif types in input_types:
non_storage_inputs[node_id] = Input(model, name=name)
else:
raise Exception("Oops, missed a type!")
non_storage = {
**non_storage_inputs,
**non_storage_outputs,
**non_storage_junctions
}
def create_model(self, network, template, initial_volumes=None):
model = Model(solver='glpk-edge')
# -----------------GENERATE NETWORK STRUCTURE -----------------------
output_ids = []
input_ids = []
non_storage_types = list(output_types.keys()) + list(
input_types.keys()) + list(node_types.keys())
# create node dictionaries by name and id
node_lookup = {}
for node in network['nodes']:
name = '{} (node)'.format(node['name'])
types = [
t for t in node['types'] if t['template_id'] == template['id']
]
if not types:
continue
if len(types) > 1:
msg = "Type is ambiguous for {}. Please remove extra types.".format(
name)
raise Exception(msg)
type_name = types[-1]['name']
node_lookup[node.get("id")] = {
'type': type_name,
'name': name,
'connect_in': 0,
'connect_out': 0,
}
if type_name in output_types:
output_ids.append(node['id'])
elif type_name in input_types:
input_ids.append(node['id'])
# create link lookups and pywr links
link_lookup = {}
for link in network['links']:
name = '{} (link)'.format(link['name'])
types = [
t for t in link['types'] if t['template_id'] == template['id']
]
if not types:
continue
type_name = types[-1]['name']
link_id = link['id']
node_1_id = link['node_1_id']
node_2_id = link['node_2_id']
node_lookup[node_1_id]['connect_out'] += 1
node_lookup[node_2_id]['connect_in'] += 1
link_lookup[link_id] = {
'name': name,
'type': type_name,
'node_1_id': node_1_id,
'node_2_id': node_2_id,
'from_slot': node_lookup[node_1_id]['connect_out'] - 1,
'to_slot': node_lookup[node_2_id]['connect_in'] - 1,
}
if node_1_id in output_ids:
node = node_lookup[node_1_id]
msg = 'Topology error: Output {} appears to be upstream of {}'.format(
node['name'], name)
raise Exception(msg)
elif node_2_id in input_ids:
node = node_lookup[node_2_id]
msg = 'Topology error: Input {} appears to be downstream of {}'.format(
node['name'], name)
raise Exception(msg)
LinkType = link_types.get(type_name, Link)
self.non_storage[('link', link_id)] = LinkType(model, name=name)
# Q/C
# remove unconnected links
d = []
for link_id, link in link_lookup.items():
if link['node_1_id'] not in node_lookup or link[
'node_2_id'] not in node_lookup:
d.append(link_id)
for link_id in d:
del link_lookup[link_id]
connected_nodes = []
for link_id, link in link_lookup.items():
connected_nodes.append(link['node_1_id'])
connected_nodes.append(link['node_2_id'])
# remove unconnected nodes
d = []
for node_id in node_lookup:
if node_id not in connected_nodes:
d.append(node_id)
for node_id in d:
del node_lookup[node_id]
# create pywr nodes dictionary with format ["name" = pywr type + 'name']
# for storage and non storage
# TODO: change looping variable notation
for node_id, node in node_lookup.items():
type_name = node['type']
name = node['name']
connect_in = node.get('connect_in', 0)
connect_out = node.get('connect_out', 0)
if (type_name in storage_types
or connect_out > 1) and type_name not in non_storage_types:
initial_volume = initial_volumes.get(
node_id, 0.0) if initial_volumes is not None else 0.0
self.storage[node_id] = Storage(model,
name=name,
num_outputs=connect_in,
num_inputs=connect_out,
initial_volume=initial_volume)
if type_name not in storage_types:
self.storage[node_id].max_volume = 0.0
else:
if type_name in input_types:
NodeType = input_types[type_name]
elif type_name in output_types:
NodeType = output_types[type_name]
elif type_name in node_types:
NodeType = node_types[type_name]
elif connect_in > 1:
NodeType = River
else:
NodeType = Link
self.non_storage[('node', node_id)] = NodeType(model,
name=name)
# create network connections
# must assign connection slots for storage
# TODO: change looping variable notation
for link_id, link in link_lookup.items():
node_1_id = link['node_1_id']
node_2_id = link['node_2_id']
_link = self.non_storage[('link', link_id)]
up_storage = self.storage.get(node_1_id)
up_node = self.non_storage.get(('node', node_1_id))
down_storage = self.storage.get(node_2_id)
down_node = self.non_storage.get(('node', node_2_id))
if up_storage:
up_storage.connect(_link, from_slot=link['from_slot'])
else:
up_node.connect(_link)
if down_storage:
_link.connect(down_storage, to_slot=link['to_slot'])
else:
_link.connect(down_node)
self.model = model
def create_model(harmonic=True):
# import flow timeseries for catchments
flow = pd.read_csv(os.path.join('data', 'thames_stochastic_flow.gz'))
flow['Date'] = flow['Date'].apply(pd.to_datetime)
flow.set_index('Date', inplace=True)
# resample input to weekly average
flow = flow.resample('7D', how='mean')
model = InspyredOptimisationModel(
solver='glpk',
start=flow.index[0],
end=flow.index[365*10], # roughly 10 years
timestep=datetime.timedelta(7), # weekly time-step
)
flow_parameter = ArrayIndexedParameter(model, flow['flow'].values)
catchment1 = Input(model, 'catchment1', min_flow=flow_parameter, max_flow=flow_parameter)
catchment2 = Input(model, 'catchment2', min_flow=flow_parameter, max_flow=flow_parameter)
reservoir1 = Storage(model, 'reservoir1', min_volume=3000, max_volume=20000, initial_volume=16000)
reservoir2 = Storage(model, 'reservoir2', min_volume=3000, max_volume=20000, initial_volume=16000)
if harmonic:
control_curve = AnnualHarmonicSeriesParameter(model, 0.5, [0.5], [0.0], mean_upper_bounds=1.0, amplitude_upper_bounds=1.0)
else:
control_curve = MonthlyProfileParameter(model, np.array([0.0]*12), lower_bounds=0.0, upper_bounds=1.0)
control_curve.is_variable = True
controller = ControlCurveParameter(model, reservoir1, control_curve, [0.0, 10.0])
transfer = Link(model, 'transfer', max_flow=controller, cost=-500)
demand1 = Output(model, 'demand1', max_flow=45.0, cost=-101)
demand2 = Output(model, 'demand2', max_flow=20.0, cost=-100)
river1 = Link(model, 'river1')
river2 = Link(model, 'river2')
# compensation flows from reservoirs
compensation1 = Link(model, 'compensation1', max_flow=5.0, cost=-9999)
compensation2 = Link(model, 'compensation2', max_flow=5.0, cost=-9998)
terminator = Output(model, 'terminator', cost=1.0)
catchment1.connect(reservoir1)
catchment2.connect(reservoir2)
reservoir1.connect(demand1)
reservoir2.connect(demand2)
reservoir2.connect(transfer)
transfer.connect(reservoir1)
reservoir1.connect(river1)
reservoir2.connect(river2)
river1.connect(terminator)
river2.connect(terminator)
reservoir1.connect(compensation1)
reservoir2.connect(compensation2)
compensation1.connect(terminator)
compensation2.connect(terminator)
r1 = TotalDeficitNodeRecorder(model, demand1)
r2 = TotalDeficitNodeRecorder(model, demand2)
r3 = AggregatedRecorder(model, [r1, r2], agg_func="mean")
r3.is_objective = 'minimise'
r4 = TotalFlowNodeRecorder(model, transfer)
r4.is_objective = 'minimise'
return model
def test_control_curve_interpolated(model):
m = model
m.scenarios.setup()
si = ScenarioIndex(0, np.array([0], dtype=np.int32))
s = Storage(m, 'Storage', max_volume=100.0)
cc = ConstantParameter(0.8)
values = [20.0, 5.0, 0.0]
s.cost = ControlCurveInterpolatedParameter(s, cc, values)
s.setup(m)
for v in (0.0, 10.0, 50.0, 80.0, 90.0, 100.0):
s.initial_volume = v
s.reset()
assert_allclose(s.get_cost(m.timestepper.current, si), np.interp(v/100.0, [0.0, 0.8, 1.0], values[::-1]))
# special case when control curve is 100%
cc.update(np.array([1.0,]))
s.initial_volume == 100.0
s.reset()
assert_allclose(s.get_cost(m.timestepper.current, si), values[1])
# special case when control curve is 0%
cc.update(np.array([0.0,]))
s.initial_volume == 0.0
s.reset()
assert_allclose(s.get_cost(m.timestepper.current, si), values[0])