Esempio n. 1
0
    def parse_textures(self):

        basename = rapi.getExtensionlessName(self.filename)
        basepath = rapi.getDirForFilePath(rapi.getInputName())

        Tex_Basename = basename.replace('Mesh', 'Tex')

        diffTex = basepath + Tex_Basename + "_diff.dds"
        normTex = basepath + Tex_Basename + "_norm.dds"
        specTex = basepath + Tex_Basename + "_spec.dds"

        if rapi.checkFileExists(diffTex):
            material = NoeMaterial(basename + "_diffuse", diffTex)
            material.setFlags(noesis.NMATFLAG_TWOSIDED)
            self.TextureFiles.append('Diffuse: ' + diffTex)
            if (rapi.checkFileExists(normTex)):
                material.setNormalTexture(normTex)
                self.TextureFiles.append('Normal: ' + normTex)
            if (rapi.checkFileExists(specTex)):
                material.setSpecularTexture(specTex)
                self.TextureFiles.append('Specular: ' + specTex)
            self.matList.append(material)

        # Read Textures Block
        if self.TextureFilesCnt > 0:
            for i in range(self.TextureFilesCnt):
                TexFile = self.inFile.readString()
                TexFilePath = rapi.getDirForFilePath(
                    rapi.getInputName()) + "/" + TexFile
                if (rapi.checkFileExists(TexFilePath)):
                    self.TextureFiles.append(TexFile)
                    material = NoeMaterial('mat' + str(i), str(TexFile))
                    material.setFlags(noesis.NMATFLAG_TWOSIDED)
                    self.matList.append(material)
    def __init__(self, data):

        self.inFile = NoeBitStream(data)
        self.animList = []
        self.texList = []
        self.matList = []
        self.boneList = []
        self.dirpath = rapi.getDirForFilePath(rapi.getInputName())
        self.basename = rapi.getExtensionlessName(rapi.getInputName())
    def __init__(self, data):

        self.inFile = NoeBitStream(data)
        self.animList = []
        self.texList = []
        self.matList = []
        self.boneList = []
        self.dirpath = rapi.getDirForFilePath(rapi.getInputName())
        self.basename = rapi.getExtensionlessName(rapi.getInputName())
def load_single_model(data, mdlList):
    '''Loads a single model. For testing purposes'''
    
    filename = rapi.getExtensionlessName(rapi.getInputName())
    parser = SanaeParser(data, filename)
    parser.parse_file()
    mdl = rapi.rpgConstructModel()
    mdl.setModelMaterials(NoeModelMaterials(parser.texList, parser.matList))
    mdlList.append(mdl)       
 def __init__(self, data):    
     '''Initialize some data. Refer to Sanae.py to see what is already
     initialized'''
     
     self.inFile = NoeBitStream(data)
     self.animList = []
     self.texList = []
     self.matList = []
     self.boneList = []
     self.basename = rapi.getExtensionlessName(rapi.getLocalFileName(rapi.getInputName()))
 def __init__(self, data):    
     '''Initialize some data. Refer to Sanae.py to see what is already
     initialized'''
     
     self.inFile = NoeBitStream(data, _ENDIAN)
     self.animList = []
     self.texList = []
     self.matList = []
     self.boneList = []
     self.meshList = []
     self.filename = rapi.getExtensionlessName(rapi.getLocalFileName(rapi.getInputName()))
Esempio n. 7
0
def noepyLoadModel(data, mdlList):
    LOADANIM = 0
    ExportSkin = 1
    VertexBool = 0  #Vertex Bool = 1 is Vertex Tint Channel Vertex Bool = 0 is Material Layers
    #Remember Vertex Colors are BGRA
    ctx = rapi.rpgCreateContext()
    bs = NoeBitStream(data)
    rapi.rpgSetOption(noesis.RPGOPT_MORPH_RELATIVEPOSITIONS, 1)
    rapi.rpgSetOption(noesis.RPGOPT_MORPH_RELATIVENORMALS, 1)
    #IDSig = bs.readUInt()
    #Blank1 = bs.readUInt()
    #BSphereX = bs.readFloat()
    #BSphereY = bs.readFloat()
    #BSphereZ = bs.readFloat()
    #BSphereThing = bs.readFloat()
    #UNK1 = bs.readFloat()
    #BBoxX1 = bs.readFloat()
    #BBoxY1 = bs.readFloat()
    #BBoxZ1 = bs.readFloat()
    #BBoxX2 = bs.readFloat()
    #BBoxY2 = bs.readFloat()
    #BBoxZ2 = bs.readFloat()
    #BBoxScaleX1 = bs.readFloat()
    #BBoxScaleY1 = bs.readFloat()
    #BBoxScaleZ1 = bs.readFloat()
    #BBoxScaleX2 = bs.readFloat()
    #BBoxScaleY2 = bs.readFloat()
    #BBoxScaleZ2 = bs.readFloat()
    #MipConstantUV0 = bs.readFloat()
    #MipConstantUV1 = bs.readFloat()
    bs.seek(84, NOESEEK_ABS)
    posAli = 0

    #MTRL STUFF
    #MatSig = bs.readUInt()
    MatCount = bs.read("L")
    MatNames = []
    pos = bs.tell()
    print(MatCount, pos)
    #MTRL LOOP
    for i in range(0, MatCount[0]):
        #MatCharCount = bs.readUInt()
        #print(MatCharCount)
        #MatNames.append (bs.readBytes(MatCharCount).decode("ASCII").rstrip("\0"))
        bs.seek(4, NOESEEK_REL)
        MatNames.append(bs.readString())

#STBS LOOP
    print(MatNames)
    subMeshCount = bs.readUInt()
    print(subMeshCount)
    MatID = []
    VertCount = []
    VertBuffType = []
    FaceCount = []
    FaceType = []
    BoneIDS = []
    BIXD = []
    BoneIDLOC = []
    BoneIDS = []

    mdl = []
    VertID = []
    MorphVertPOS = []
    MorphVertNorm = []
    MorphFrameCountID = []
    MDLWritten = rapi.getInputName()
    MDLWrite = NoeBitStream()
    topname = rapi.getExtensionlessName(
        rapi.getExtensionlessName(rapi.getInputName()))
    for i in range(0, subMeshCount):
        BoneIDSPre = []
        print("Sub Mesh", i)
        tsbsSig = bs.readUInt()
        print(tsbsSig)
        MatID.append(bs.readUInt())
        Blank2 = bs.readUInt()
        BVXD = bs.readUInt()
        VertCount.append(bs.readUInt())
        VertBuffType.append(bs.readUShort())
        print(VertBuffType[i])
        MorphFrameCount = bs.readUInt()
        MorphFrameCountID.append(MorphFrameCount)
        if MorphFrameCount is 0:
            print(MorphFrameCount, "Morph Frame Count is 0")

        if MorphFrameCount is not 0:
            print(MorphFrameCount, "Morph Frame Count is not 0")
            n = 0
            MorphVertCountList = []
            FrameLOC = []
            FrameOrder = []
            for m in range(0, MorphFrameCount):
                pos = bs.tell()
                FrameLOC.append(pos)
                MorphVertCount = bs.readUInt()
                MorphVertCountList.append(MorphVertCount)
                #print("MorphVertCount", MorphVertCount)
                #n = 0
                FrameName = ("Frame_" + str(n))
                n = (n + 1)
                Frame = []
                for mv in range(0, MorphVertCount):
                    VertID.append(bs.readUInt())
                    VertX = bs.readUShort()
                    #pos = bs.tell()
                    #VertX = (VertX / 32767)
                    VertY = bs.readUShort()
                    #pos = bs.tell()
                    #VertY = (VertY / 32767)
                    VertZ = bs.readUShort()
                    #pos = bs.tell()
                    #VertZ = (VertZ / 32767)
                    VertNormX = bs.readUShort()
                    VertNormY = bs.readUShort()
                    VertNormZ = bs.readUShort()
                    bs.seek(8, NOESEEK_REL)
                    #pos = bs.tell()
            for mc in range(0, MorphFrameCount):
                FrameOrder.append(bs.readUShort())
            FinalMorphCount = bs.readUShort()
            MorphCharCount = bs.readUInt()
            MorphName = bs.readString()
            print(MorphName)

        if VertBuffType[i] == int(768) or VertBuffType[i] == int(256):
            bs.seek(3, NOESEEK_REL)
        pos = bs.tell()
        BIXD.append(pos)
        BIXDSig = bs.readUInt()
        Blank2 = bs.readUInt()
        FaceCount.append(bs.readUInt())
        FaceType.append(bs.readUInt())
        pos = bs.tell()
        BoneIDLOC.append(pos)
        BoneIDCount = bs.readUByte()
        for bi in range(0, BoneIDCount):
            BoneIDSPre.append(bs.readUByte())
        BoneIDS.append(BoneIDSPre)
        bs.seek(56, NOESEEK_REL)
        if VertBuffType[i] == (1280, ):
            crap = bs.readUShort()
            VertBuffType[i] = (1024, )
    print("MaterialIDS", MatID)
    #RigStuff
    if VertBuffType[0] == int(1024) or VertBuffType[0] == int(768):
        boneReList = RigStuff(VertBuffType, topname)


#MDLSourceStuff
    MeshExists = rapi.checkFileExists(topname + str(".Mesh"))
    if MeshExists:
        MDLFile = rapi.loadIntoByteArray(topname + str(".Mesh"))
    else:
        MDLFile = rapi.loadPairedFile("Brutal Legend", ".Mesh")
    MDL = NoeBitStream(MDLFile)
    MeshStarts = []
    MeshFaceStarts = []
    BONINDBUFF = []

    #print("MeshStarts", MeshStarts, "MeshFaceStarts", MeshFaceStarts)
    print("MDL AT ", MDL.tell())
    for s in range(0, subMeshCount):
        Face = []

        POS, NORM, TAN, UV1, UV2, COL1, COL2, BI, BW = VertStuff(
            MDL, VertCount[s], VertBuffType[s])
        POS = struct.pack('B' * len(POS), *POS)
        NORM = struct.pack('B' * len(NORM), *NORM)
        TAN = struct.pack('B' * len(TAN), *TAN)
        UV1 = struct.pack('B' * len(UV1), *UV1)
        UV2 = struct.pack('B' * len(UV2), *UV2)
        if VertBuffType[s] == int(1024) or VertBuffType[s] == int(512):
            rapi.rpgBindPositionBuffer(POS, noesis.RPGEODATA_HALFFLOAT, 8)
            rapi.rpgBindNormalBuffer(NORM, noesis.RPGEODATA_HALFFLOAT, 8)
            rapi.rpgBindTangentBuffer(TAN, noesis.RPGEODATA_HALFFLOAT, 8)
            rapi.rpgBindUV1Buffer(UV1, noesis.RPGEODATA_HALFFLOAT, 4)
            rapi.rpgBindUV2Buffer(UV2, noesis.RPGEODATA_HALFFLOAT, 4)
        if VertBuffType[s] == int(768) or VertBuffType[s] == int(256):
            rapi.rpgBindPositionBuffer(POS, noesis.RPGEODATA_FLOAT, 12)
            rapi.rpgBindNormalBuffer(NORM, noesis.RPGEODATA_FLOAT, 12)
            #rapi.rpgBindTangentBuffer(TAN, noesis.RPGEODATA_FLOAT, 16)
            rapi.rpgBindUV1Buffer(UV1, noesis.RPGEODATA_FLOAT, 8)
            rapi.rpgBindUV2Buffer(UV2, noesis.RPGEODATA_FLOAT, 8)
        if VertexBool:
            COL = COL2
        else:
            COL = COL1
        COL = struct.pack('B' * len(COL), *COL)
        #VertColor = BGRA
        rapi.rpgBindColorBuffer(COL, noesis.RPGEODATA_UBYTE, 4, 4)
        if VertBuffType[s] == int(1024) or VertBuffType[s] == int(768):
            rapi.rpgSetBoneMap(BoneIDS[s])
            IDS = struct.pack('B' * len(BI), *BI)
            WEIGHTS = struct.pack('B' * len(BW), *BW)
            if ExportSkin:
                print("Bind Skin")
                rapi.rpgBindBoneIndexBuffer(IDS, noesis.RPGEODATA_BYTE, 4, 4)
                rapi.rpgBindBoneWeightBuffer(WEIGHTS, noesis.RPGEODATA_UBYTE,
                                             4, 4)
        FaceBuff = MDL.readBytes(FaceCount[s] * 2)
        # FaceBuff = struct.pack('H'*len(Face), *Face)
        if MorphFrameCountID[s] is not 0:
            ##            RETURN = bs.tell()
            for mf in range(0, MorphFrameCountID[s]):

                bs.seek(FrameLOC[mf], NOESEEK_ABS)
                # print(FrameLOC[mf], FlexNames[FrameOrder[mf]])
                MorphVertCount = bs.readUInt()
                FramePOS = []
                FrameNorm = []
                FrameTan = []
                FrameIDS = []
                MorphPOS = []
                MorphNorm = []
                MorphTan = []
                for mm in range(0, MorphVertCount):
                    FrameIDS.append(bs.readUInt())
                    MPOSX = (((bs.readShort() / 32767) * 2))
                    MPOSY = (((bs.readShort() / 32767) * 2))
                    MPOSZ = (((bs.readShort() / 32767) * 2))
                    MNORMX = (((bs.readShort() / 32767) * 2))
                    MNORMY = (((bs.readShort() / 32767) * 2))
                    MNORMZ = (((bs.readShort() / 32767) * 2))
                    MTANX = (((bs.readShort() / 32767) * 2))
                    MTANY = (((bs.readShort() / 32767) * 2))
                    MTANZ = (((bs.readShort() / 32767) * 2))
                    MTANW = (((bs.readShort() / 32767) * 2))
                    FramePOS.append((float(MPOSX), float(MPOSY), float(MPOSZ)))
                    FrameNorm.append(
                        (float(MNORMX), float(MNORMY), float(MNORMZ)))
                    FrameTan.append((float(MTANX), float(MTANY), float(MTANZ),
                                     float(MTANW)))
                for mv in range(0, VertCount[s]):
                    if mv in FrameIDS:
                        ID = FrameIDS.index(mv)
                        MorphPOS.append(FramePOS[ID])
                        MorphNorm.append(FrameNorm[ID])
                        MorphTan.append(FrameTan[ID])
                    else:
                        MorphPOS.append((float(0.0), float(0.0), float(0.0)))
                        MorphNorm.append((float(0.0), float(0.0), float(0.0)))
                        MorphTan.append(
                            (float(0.0), float(0.0), float(0.0), float(0.0)))
                MPOSBUFF3 = list(itertools.chain.from_iterable(MorphPOS))
                MNORMBUFF = list(itertools.chain.from_iterable(MorphNorm))
                MTANBUFF = list(itertools.chain.from_iterable(MorphTan))
                #rapi.rpgSetName(MeshName)
                MPOS = struct.pack('f' * len(MPOSBUFF3), *MPOSBUFF3)
                MNORM = struct.pack('f' * len(MNORMBUFF), *MNORMBUFF)
                MTAN = struct.pack('f' * len(MTANBUFF), *MTANBUFF)
                rapi.rpgFeedMorphTargetPositions(MPOS, noesis.RPGEODATA_FLOAT,
                                                 12)
                rapi.rpgFeedMorphTargetNormals(MNORM, noesis.RPGEODATA_FLOAT,
                                               12)
                rapi.rpgCommitMorphFrame(VertCount[s])
                MPOSBUFF = []
                MNORMBUFF = []
                MTANBUFF = []
                MPOS = None
                MNORM = None
                MTAN = None
            rapi.rpgCommitMorphFrameSet()
        Mesh = ("Mesh_" + str(s))
        MeshName = str(Mesh)
        rapi.rpgSetName(MeshName)
        print(MatNames[MatID[s]])
        CurrentMaterial = MatNames[MatID[s]]
        CurrentMaterial = CurrentMaterial.replace('/', '_')
        rapi.rpgSetMaterial(CurrentMaterial)
        rapi.rpgSmoothTangents()
        if FaceType[s] == 2:
            rapi.rpgCommitTriangles(FaceBuff, noesis.RPGEODATA_USHORT,
                                    FaceCount[s], noesis.RPGEO_TRIANGLE, 1)
        else:
            rapi.rpgCommitTriangles(FaceBuff, noesis.RPGEODATA_USHORT,
                                    FaceCount[s], noesis.RPGEO_TRIANGLE_STRIP,
                                    1)
        rapi.rpgClearBufferBinds()

    mdl = rapi.rpgConstructModel()

    if LOADANIM == (0):
        print("No Anim")
        if VertBuffType[0] == int(1024) or VertBuffType[0] == int(768):
            mdl.setBones(boneReList)
        mdlList.append(
            mdl
        )  #important, don't forget to put your loaded model in the mdlList

    return 1