def check_capture(self):
tex = rd.TextureDisplay()
# At each action, the centre pixel of the viewport should be green
action = self.get_first_action()
while action is not None:
self.controller.SetFrameEvent(action.eventId, False)
if action.flags & rd.ActionFlags.Drawcall:
pipe = self.controller.GetPipelineState()
tex = self.controller.GetPipelineState().GetOutputTargets()[0].resourceId
view: rd.Viewport = self.controller.GetPipelineState().GetViewport(0)
x,y = int(view.x + view.width / 2), int(view.y + view.height / 2)
# convert to top-left co-ordinates for use with PickPixel
y = self.get_texture(tex).height - y
self.check_pixel_value(tex, x, y, [0.0, 1.0, 0.0, 1.0])
action = action.next
rdtest.log.success("Draws are all green")
# Now save the backbuffer to disk
ref_path = rdtest.get_tmp_path('backbuffer.png')
save_data = rd.TextureSave()
save_data.resourceId = tex
save_data.destType = rd.FileType.PNG
self.controller.SaveTexture(save_data, ref_path)
# Open the capture and grab the thumbnail, check that it is all green too (dirty way of verifying we didn't
# break in-app updates but somehow end up with the right data)
cap = rd.OpenCaptureFile()
# Open a particular file
status = cap.OpenFile(self.capture_filename, '', None)
# Make sure the file opened successfully
if status != rd.ReplayStatus.Succeeded:
cap.Shutdown()
raise rdtest.TestFailureException("Couldn't open '{}': {}".format(self.capture_filename, str(status)))
thumb: rd.Thumbnail = cap.GetThumbnail(rd.FileType.PNG, 0)
tmp_path = rdtest.get_tmp_path('thumbnail.png')
with open(tmp_path, 'wb') as f:
f.write(thumb.data)
# The original thumbnail should also be identical, since we have the uncompressed extended thumbnail.
if not rdtest.png_compare(tmp_path, ref_path):
raise rdtest.TestFailureException("Reference backbuffer and thumbnail image differ", tmp_path, ref_path)
rdtest.log.success("Thumbnail is identical to reference")
def check_capture(self):
self.check_final_backbuffer()
# Open the capture and grab the thumbnail, check that it is all green too (dirty way of verifying we didn't
# break in-app updates but somehow end up with the right data)
cap = rd.OpenCaptureFile()
# Open a particular file
status = cap.OpenFile(self.capture_filename, '', None)
# Make sure the file opened successfully
if status != rd.ReplayStatus.Succeeded:
cap.Shutdown()
raise rdtest.TestFailureException("Couldn't open '{}': {}".format(
self.capture_filename, str(status)))
thumb: rd.Thumbnail = cap.GetThumbnail(rd.FileType.PNG, 0)
tmp_path = rdtest.get_tmp_path('thumbnail.png')
with open(tmp_path, 'wb') as f:
f.write(thumb.data)
# The original thumbnail should also be identical, since we have the uncompressed extended thumbnail.
ref_path = self.get_ref_path('backbuffer.png')
if not rdtest.png_compare(tmp_path, ref_path):
raise rdtest.TestFailureException(
"Reference backbuffer and thumbnail image differ", tmp_path,
ref_path)
rdtest.log.success("Thumbnail is identical to reference")
def check_region(self, region, test):
colors = self.get_region_cols(region)
if not test(colors):
tmp_path = rdtest.get_tmp_path('output.png')
rdtest.png_save(tmp_path, self.rows, self.out.GetDimensions(), False)
raise rdtest.TestFailureException("Expected line segment wrong, colors: {}".format(colors), tmp_path)
def check_clearbeforedraw_depth(self, out, depthId):
# Test ClearBeforeDraw with a depth target
tex = rd.TextureDisplay()
tex.overlay = rd.DebugOverlay.ClearBeforeDraw
tex.resourceId = depthId
out.SetTextureDisplay(tex)
out.GetDebugOverlayTexID() # Called to refresh the overlay
overlay = rd.DebugOverlay.ClearBeforeDraw
test_name = str(overlay) + '.Depth'
overlay_path = rdtest.get_tmp_path(test_name + '.png')
ref_path = self.get_ref_path(test_name + '.png')
save_data = rd.TextureSave()
save_data.resourceId = depthId
save_data.destType = rd.FileType.PNG
save_data.channelExtract = 0
tolerance = 2
self.controller.SaveTexture(save_data, overlay_path)
if not rdtest.png_compare(overlay_path, ref_path, tolerance):
raise rdtest.TestFailureException("Reference and output image differ for overlay {}".format(test_name), overlay_path, ref_path)
rdtest.log.success("Reference and output image are identical for {}".format(test_name))
def cache_output(self):
self.out.SetMeshDisplay(self.cfg)
self.out.Display()
pixels: bytes = self.out.ReadbackOutputTexture()
dim = self.out.GetDimensions()
pitch = dim[0]*3
self.rows = [pixels[row_start:row_start + pitch] for row_start in range(0, dim[1] * pitch, pitch)]
rdtest.png_save(rdtest.get_tmp_path('output.png'), self.rows, dim, False)
def check_overlay(self, eventId: int, out: rd.ReplayOutput,
tex: rd.TextureDisplay, save_data: rd.TextureSave):
pipe: rd.PipeState = self.controller.GetPipelineState()
# Check that the highlight draw overlay is empty
tex.resourceId = pipe.GetOutputTargets()[0].resourceId
out.SetTextureDisplay(tex)
overlay_path = rdtest.get_tmp_path(str(eventId) + '_draw.png')
ref_path = self.get_ref_path(str(eventId) + '_draw.png')
save_data.resourceId = out.GetDebugOverlayTexID()
self.controller.SaveTexture(save_data, overlay_path)
if not rdtest.image_compare(overlay_path, ref_path):
raise rdtest.TestFailureException(
"Reference and output image differ @ EID {}".format(
str(eventId)), ref_path, overlay_path)
def save_texture(self, texsave: rd.TextureSave):
if texsave.resourceId == rd.ResourceId.Null():
return
rdtest.log.print("Saving image of " + str(texsave.resourceId))
texsave.comp.blackPoint = 0.0
texsave.comp.whitePoint = 1.0
texsave.alpha = rd.AlphaMapping.BlendToCheckerboard
filename = rdtest.get_tmp_path('texsave')
texsave.destType = rd.FileType.HDR
self.controller.SaveTexture(texsave, filename + ".hdr")
texsave.destType = rd.FileType.JPG
self.controller.SaveTexture(texsave, filename + ".jpg")
texsave.mip = -1
texsave.slice.sliceIndex = -1
texsave.destType = rd.FileType.DDS
self.controller.SaveTexture(texsave, filename + ".dds")
def check_capture(self, capture_filename: str,
controller: rd.ReplayController):
self.controller = controller
self.opengl_mode = (self.controller.GetAPIProperties().pipelineType ==
rd.GraphicsAPI.OpenGL)
failed = False
try:
# First check with the local controller
self.check_capture_with_controller('')
except rdtest.TestFailureException as ex:
rdtest.log.error(str(ex))
failed = True
# Now shut it down
self.controller.Shutdown()
self.controller = None
# Launch a remote server
rdtest.launch_remote_server()
# Wait for it to start
time.sleep(0.5)
ret: Tuple[rd.ReplayStatus,
rd.RemoteServer] = rd.CreateRemoteServerConnection(
'localhost')
status, remote = ret
proxies = remote.LocalProxies()
try:
# Try D3D11 and GL as proxies, D3D12/Vulkan technically don't have proxying implemented even though they
# will be listed in proxies
for api in ['D3D11', 'OpenGL']:
if api not in proxies:
continue
try:
ret: Tuple[rd.ReplayStatus,
rd.ReplayController] = remote.OpenCapture(
proxies.index(api), capture_filename,
rd.ReplayOptions(), None)
status, self.controller = ret
# Now check with the proxy
self.check_capture_with_controller(api)
except ValueError:
continue
except rdtest.TestFailureException as ex:
rdtest.log.error(str(ex))
failed = True
finally:
self.controller.Shutdown()
self.controller = None
finally:
remote.ShutdownServerAndConnection()
# Now iterate over all the temp images saved out, load them as captures, and check the texture.
dir_path = rdtest.get_tmp_path('')
was_opengl = self.opengl_mode
# We iterate in filename order, so that dds files get opened before png files.
for file in os.scandir(dir_path):
if '.dds' not in file.name and '.png' not in file.name:
continue
cap = rd.OpenCaptureFile()
status = cap.OpenFile(file.path, 'rdc', None)
if status != rd.ReplayStatus.Succeeded:
rdtest.log.error("Couldn't open {}".format(file.name))
failed = True
continue
ret: Tuple[rd.ReplayStatus, rd.ReplayController] = cap.OpenCapture(
rd.ReplayOptions(), None)
status, self.controller = ret
# Some packed formats can't be opened, allow that
if status == rd.ReplayStatus.ImageUnsupported and 'dds' in file.name:
rdtest.log.print("Couldn't open {} - unsupported".format(
file.name))
continue
if status != rd.ReplayStatus.Succeeded:
rdtest.log.error("Couldn't open {}".format(file.name))
failed = True
continue
self.filename = file.name.replace('.dds', '').replace('.png', '')
[a, b] = file.name.replace('.dds',
' (DDS)').replace('.png',
' (PNG)').split('@')
self.controller.SetFrameEvent(
self.controller.GetDrawcalls()[0].eventId, True)
try:
self.opengl_mode = False
fmt: rd.ResourceFormat = self.controller.GetTextures(
)[0].format
is_compressed = (rd.ResourceFormatType.BC1 <= fmt.type <=
rd.ResourceFormatType.BC7
or fmt.type == rd.ResourceFormatType.EAC
or fmt.type == rd.ResourceFormatType.ETC2
or fmt.type == rd.ResourceFormatType.ASTC
or fmt.type == rd.ResourceFormatType.PVRTC)
# OpenGL saves all non-compressed images to disk with a flip, since that's the expected order for
# most formats. The effect of this is that we should apply the opengl_mode workaround for all files
# *except* compressed textures
if was_opengl and not is_compressed:
self.opengl_mode = True
self.check_test(
a, b, Texture_Zoo.TEST_DDS
if '.dds' in file.name else Texture_Zoo.TEST_PNG)
rdtest.log.success("{} loaded with the correct data".format(
file.name))
except rdtest.TestFailureException as ex:
rdtest.log.error(str(ex))
failed = True
self.controller.Shutdown()
self.controller = None
if failed:
raise rdtest.TestFailureException(
"Some tests were not as expected")
def check_test(self, fmt_name: str, name: str, test_mode: int):
pipe: rd.PipeState = self.controller.GetPipelineState()
image_view = (test_mode != Texture_Zoo.TEST_CAPTURE)
if image_view:
bound_res: rd.BoundResource = pipe.GetOutputTargets()[0]
else:
bound_res: rd.BoundResource = pipe.GetReadOnlyResources(
rd.ShaderStage.Pixel)[0].resources[0]
texs = self.controller.GetTextures()
for t in texs:
self.textures[t.resourceId] = t
tex_id: rd.ResourceId = bound_res.resourceId
tex: rd.TextureDescription = self.textures[tex_id]
comp_type: rd.CompType = tex.format.compType
if bound_res.typeCast != rd.CompType.Typeless:
comp_type = bound_res.typeCast
# When not running proxied, save non-typecasted textures to disk
if not image_view and not self.proxied and (
tex.format.compType == comp_type
or tex.format.type == rd.ResourceFormatType.D24S8
or tex.format.type == rd.ResourceFormatType.D32S8):
save_data = rd.TextureSave()
save_data.resourceId = tex_id
save_data.destType = rd.FileType.DDS
save_data.sample.mapToArray = True
self.textures[self.filename] = tex
path = rdtest.get_tmp_path(self.filename + '.dds')
success: bool = self.controller.SaveTexture(save_data, path)
if not success:
try:
os.remove(path)
except Exception:
pass
save_data.destType = rd.FileType.PNG
save_data.slice.sliceIndex = 0
save_data.sample.sampleIndex = 0
path = path.replace('.dds', '.png')
if comp_type == rd.CompType.UInt:
save_data.comp.blackPoint = 0.0
save_data.comp.whitePoint = 255.0
elif comp_type == rd.CompType.SInt:
save_data.comp.blackPoint = -255.0
save_data.comp.whitePoint = 0.0
elif comp_type == rd.CompType.SNorm:
save_data.comp.blackPoint = -1.0
save_data.comp.whitePoint = 0.0
success: bool = self.controller.SaveTexture(save_data, path)
if not success:
try:
os.remove(path)
except Exception:
pass
value0 = []
comp_count = tex.format.compCount
# When viewing PNGs only compare the components that the original texture had
if test_mode == Texture_Zoo.TEST_PNG:
comp_count = self.textures[self.filename]
tex.msSamp = 0
tex.arraysize = 1
tex.depth = 1
self.fake_msaa = 'MSAA' in name
elif test_mode == Texture_Zoo.TEST_DDS:
tex.arraysize = self.textures[self.filename].arraysize
tex.msSamp = self.textures[self.filename].msSamp
self.fake_msaa = 'MSAA' in name
# HACK: We don't properly support BGRX, so just drop the alpha channel. We can't set this to compCount = 3
# internally because that's a 24-bit format with no padding...
if 'B8G8R8X8' in fmt_name:
comp_count = 3
# Completely ignore the alpha for BC1, our encoder doesn't pay attention to it
if tex.format.type == rd.ResourceFormatType.BC1:
comp_count = 3
# Calculate format-appropriate epsilon
eps_significand = 1.0
# Account for the sRGB curve by more generous epsilon
if comp_type == rd.CompType.UNormSRGB:
eps_significand = 2.5
# Similarly SNorm essentially loses a bit of accuracy due to us only using negative values
elif comp_type == rd.CompType.SNorm:
eps_significand = 2.0
if tex.format.type == rd.ResourceFormatType.R4G4B4A4 or tex.format.type == rd.ResourceFormatType.R4G4:
eps = (eps_significand / 15.0)
elif rd.ResourceFormatType.BC1 <= tex.format.type <= rd.ResourceFormatType.BC3:
eps = (eps_significand / 15.0) # 4-bit precision in some channels
elif tex.format.type == rd.ResourceFormatType.R5G5B5A1 or tex.format.type == rd.ResourceFormatType.R5G6B5:
eps = (eps_significand / 31.0)
elif tex.format.type == rd.ResourceFormatType.R11G11B10:
eps = (eps_significand / 31.0) # 5-bit mantissa in blue
elif tex.format.type == rd.ResourceFormatType.R9G9B9E5:
eps = (
eps_significand / 63.0
) # we have 9 bits of data, but might lose 2-3 due to shared exponent
elif tex.format.type == rd.ResourceFormatType.BC6 and tex.format.compType == rd.CompType.SNorm:
eps = (eps_significand / 63.0
) # Lose a bit worth of precision for the signed version
elif rd.ResourceFormatType.BC4 <= tex.format.type <= rd.ResourceFormatType.BC7:
eps = (eps_significand / 127.0)
elif tex.format.compByteWidth == 1:
eps = (eps_significand / 255.0)
elif comp_type == rd.CompType.Depth and tex.format.compCount == 2:
eps = (eps_significand / 255.0) # stencil is only 8-bit
elif tex.format.type == rd.ResourceFormatType.A8:
eps = (eps_significand / 255.0)
elif tex.format.type == rd.ResourceFormatType.R10G10B10A2:
eps = (eps_significand / 1023.0)
else:
# half-floats have 11-bit mantissa. This epsilon is tight enough that we can be sure
# any remaining errors are implementation inaccuracy and not our bug
eps = (eps_significand / 2047.0)
for mp in range(tex.mips):
for sl in range(max(tex.arraysize, max(1, tex.depth >> mp))):
z = 0
if tex.depth > 1:
z = sl
for sm in range(tex.msSamp):
for x in range(max(1, tex.width >> mp)):
for y in range(max(1, tex.height >> mp)):
picked: rd.PixelValue = self.pick(
tex_id, x, y, self.sub(mp, sl, sm), comp_type)
# each 3D slice cycles the x. This only affects the primary diagonal
offs_x = (x + z) % max(1, tex.width >> mp)
# The diagonal inverts the colors
inverted = (offs_x != y)
# second slice adds a coarse checkerboard pattern of inversion
if tex.arraysize > 1 and sl == 1 and (
(int(x / 2) % 2) != (int(y / 2) % 2)):
inverted = not inverted
if comp_type == rd.CompType.UInt or comp_type == rd.CompType.SInt:
expected = [10, 40, 70, 100]
if inverted:
expected = list(reversed(expected))
expected = [
c + 10 * (sm + mp) for c in expected
]
if comp_type == rd.CompType.SInt:
picked = picked.intValue
else:
picked = picked.uintValue
elif (tex.format.type
== rd.ResourceFormatType.D16S8
or tex.format.type
== rd.ResourceFormatType.D24S8
or tex.format.type
== rd.ResourceFormatType.D32S8):
# depth/stencil is a bit special
expected = [0.1, 10, 100, 0.85]
if inverted:
expected = list(reversed(expected))
expected[0] += 0.075 * (sm + mp)
expected[1] += 10 * (sm + mp)
# Normalise stencil value
expected[1] = expected[1] / 255.0
picked = picked.floatValue
else:
expected = [0.1, 0.35, 0.6, 0.85]
if inverted:
expected = list(reversed(expected))
expected = [
c + 0.075 * (sm + mp) for c in expected
]
picked = picked.floatValue
# SNorm/SInt is negative
if comp_type == rd.CompType.SNorm or comp_type == rd.CompType.SInt:
expected = [-c for c in expected]
# BGRA textures have a swizzle applied
if tex.format.BGRAOrder():
expected[0:3] = reversed(expected[0:3])
# alpha channel in 10:10:10:2 has extremely low precision, and the ULP requirements mean
# we basically can't trust anything between 0 and 1 on float formats. Just round in that
# case as it still lets us differentiate between alpha 0.0-0.5 and 0.5-1.0
if tex.format.type == rd.ResourceFormatType.R10G10B10A2:
if comp_type == rd.CompType.UInt:
expected[3] = min(3, expected[3])
else:
expected[3] = round(expected[3]) * 1.0
picked[3] = round(picked[3]) * 1.0
# Handle 1-bit alpha
if tex.format.type == rd.ResourceFormatType.R5G5B5A1:
expected[
3] = 1.0 if expected[3] >= 0.5 else 0.0
picked[3] = 1.0 if picked[3] >= 0.5 else 0.0
# A8 picked values come out in alpha, but we want to compare against the single channel
if tex.format.type == rd.ResourceFormatType.A8:
picked[0] = picked[3]
# Clamp to number of components in the texture
expected = expected[0:comp_count]
picked = picked[0:comp_count]
if mp == 0 and sl == 0 and sm == 0 and x == 0 and y == 0:
value0 = picked
# For SRGB textures picked values will come out as linear
def srgb2linear(f):
if f <= 0.04045:
return f / 12.92
else:
return ((f + 0.055) / 1.055)**2.4
if comp_type == rd.CompType.UNormSRGB:
expected[0:3] = [
srgb2linear(x) for x in expected[0:3]
]
if test_mode == Texture_Zoo.TEST_PNG:
orig_comp = self.textures[
self.filename].format.compType
if orig_comp == rd.CompType.SNorm or orig_comp == rd.CompType.SInt:
expected = [1.0 - x for x in expected]
if not rdtest.value_compare(picked, expected, eps):
raise rdtest.TestFailureException(
"At ({},{}) of slice {}, mip {}, sample {} of {} {} got {}. Expected {}"
.format(x, y, sl, mp, sm, name, fmt_name,
picked, expected))
if not image_view:
output_tex = pipe.GetOutputTargets()[0].resourceId
# in the test captures pick the output texture, it should be identical to the
# (0,0) pixel in slice 0, mip 0, sample 0
view: rd.Viewport = pipe.GetViewport(0)
val: rd.PixelValue = self.pick(
pipe.GetOutputTargets()[0].resourceId,
int(view.x + view.width / 2), int(view.y + view.height / 2),
rd.Subresource(), rd.CompType.Typeless)
picked = val.floatValue
# A8 picked values come out in alpha, but we want to compare against the single channel
if tex.format.type == rd.ResourceFormatType.A8:
picked[0] = picked[3]
# Clamp to number of components in the texture
picked = picked[0:comp_count]
# Up-convert any non-float expected values to floats
value0 = [float(x) for x in value0]
# For depth/stencil images, one of either depth or stencil should match
if comp_type == rd.CompType.Depth and len(value0) == 2:
if picked[0] == 0.0:
value0[0] = 0.0
# normalise stencil value if it isn't already
if picked[1] > 1.0:
picked[1] /= 255.0
elif picked[0] > 1.0:
# un-normalised stencil being rendered in red, match against our stencil expectation
picked[0] /= 255.0
value0[0] = value0[1]
value0[1] = 0.0
else:
value0[1] = 0.0
if not rdtest.value_compare(picked, value0, eps):
raise rdtest.TestFailureException(
"In {} {} Top-left pixel as rendered is {}. Expected {}".
format(name, fmt_name, picked, value0))
def check_test(self, fmt_name: str, name: str, test_mode: int):
pipe: rd.PipeState = self.controller.GetPipelineState()
image_view = (test_mode != Texture_Zoo.TEST_CAPTURE)
if image_view:
bound_res: rd.BoundResource = pipe.GetOutputTargets()[0]
else:
bound_res: rd.BoundResource = pipe.GetReadOnlyResources(
rd.ShaderStage.Pixel)[0].resources[0]
texs = self.controller.GetTextures()
for t in texs:
self.textures[t.resourceId] = t
tex_id: rd.ResourceId = bound_res.resourceId
tex: rd.TextureDescription = self.textures[tex_id]
comp_type: rd.CompType = tex.format.compType
if bound_res.typeCast != rd.CompType.Typeless:
comp_type = bound_res.typeCast
# When not running proxied, save non-typecasted textures to disk
if not image_view and not self.proxied and (
tex.format.compType == comp_type
or tex.format.type == rd.ResourceFormatType.D24S8
or tex.format.type == rd.ResourceFormatType.D32S8):
save_data = rd.TextureSave()
save_data.resourceId = tex_id
save_data.destType = rd.FileType.DDS
save_data.sample.mapToArray = True
self.textures[self.filename] = tex
path = rdtest.get_tmp_path(self.filename + '.dds')
success: bool = self.controller.SaveTexture(save_data, path)
if not success:
if self.d3d_mode:
raise rdtest.TestFailureException(
"Couldn't save DDS to {} on D3D.".format(
self.filename))
try:
os.remove(path)
except Exception:
pass
save_data.destType = rd.FileType.PNG
save_data.slice.sliceIndex = 0
save_data.sample.sampleIndex = 0
path = path.replace('.dds', '.png')
if comp_type == rd.CompType.UInt:
save_data.comp.blackPoint = 0.0
save_data.comp.whitePoint = 255.0
elif comp_type == rd.CompType.SInt:
save_data.comp.blackPoint = -255.0
save_data.comp.whitePoint = 0.0
elif comp_type == rd.CompType.SNorm:
save_data.comp.blackPoint = -1.0
save_data.comp.whitePoint = 0.0
success: bool = self.controller.SaveTexture(save_data, path)
if not success:
try:
os.remove(path)
except Exception:
pass
value0 = []
comp_count = tex.format.compCount
# When viewing PNGs only compare the components that the original texture had
if test_mode == Texture_Zoo.TEST_PNG:
comp_count = self.textures[self.filename]
tex.msSamp = 0
tex.arraysize = 1
tex.depth = 1
self.fake_msaa = 'MSAA' in name
elif test_mode == Texture_Zoo.TEST_DDS:
tex.arraysize = self.textures[self.filename].arraysize
tex.msSamp = self.textures[self.filename].msSamp
self.fake_msaa = 'MSAA' in name
# HACK: We don't properly support BGRX, so just drop the alpha channel. We can't set this to compCount = 3
# internally because that's a 24-bit format with no padding...
if 'B8G8R8X8' in fmt_name:
comp_count = 3
# Completely ignore the alpha for BC1, our encoder doesn't pay attention to it
if tex.format.type == rd.ResourceFormatType.BC1:
comp_count = 3
# Calculate format-appropriate epsilon
eps_significand = 1.0
# Account for the sRGB curve by more generous epsilon
if comp_type == rd.CompType.UNormSRGB:
eps_significand = 2.5
# Similarly SNorm essentially loses a bit of accuracy due to us only using negative values
elif comp_type == rd.CompType.SNorm:
eps_significand = 2.0
if tex.format.type == rd.ResourceFormatType.R4G4B4A4 or tex.format.type == rd.ResourceFormatType.R4G4:
eps = (eps_significand / 15.0)
elif rd.ResourceFormatType.BC1 <= tex.format.type <= rd.ResourceFormatType.BC3:
eps = (eps_significand / 15.0) # 4-bit precision in some channels
elif tex.format.type == rd.ResourceFormatType.R5G5B5A1 or tex.format.type == rd.ResourceFormatType.R5G6B5:
eps = (eps_significand / 31.0)
elif tex.format.type == rd.ResourceFormatType.R11G11B10:
eps = (eps_significand / 31.0) # 5-bit mantissa in blue
elif tex.format.type == rd.ResourceFormatType.R9G9B9E5:
eps = (
eps_significand / 63.0
) # we have 9 bits of data, but might lose 2-3 due to shared exponent
elif tex.format.type == rd.ResourceFormatType.BC6 and tex.format.compType == rd.CompType.SNorm:
eps = (eps_significand / 63.0
) # Lose a bit worth of precision for the signed version
elif rd.ResourceFormatType.BC4 <= tex.format.type <= rd.ResourceFormatType.BC7:
eps = (eps_significand / 127.0)
elif tex.format.compByteWidth == 1:
eps = (eps_significand / 255.0)
elif comp_type == rd.CompType.Depth and tex.format.compCount == 2:
eps = (eps_significand / 255.0) # stencil is only 8-bit
elif tex.format.type == rd.ResourceFormatType.A8:
eps = (eps_significand / 255.0)
elif tex.format.type == rd.ResourceFormatType.R10G10B10A2:
eps = (eps_significand / 1023.0)
else:
# half-floats have 11-bit mantissa. This epsilon is tight enough that we can be sure
# any remaining errors are implementation inaccuracy and not our bug
eps = (eps_significand / 2047.0)
for mp in range(tex.mips):
for sl in range(max(tex.arraysize, max(1, tex.depth >> mp))):
z = 0
if tex.depth > 1:
z = sl
for sm in range(tex.msSamp):
cur_sub = self.sub(mp, sl, sm)
tex_display = rd.TextureDisplay()
tex_display.resourceId = tex_id
tex_display.subresource = cur_sub
tex_display.flipY = self.opengl_mode
tex_display.typeCast = comp_type
tex_display.alpha = False
tex_display.scale = 1.0 / float(1 << mp)
tex_display.backgroundColor = rd.FloatVector(
0.0, 0.0, 0.0, 1.0)
if comp_type == rd.CompType.UInt:
tex_display.rangeMin = 0.0
tex_display.rangeMax = 255.0
elif comp_type == rd.CompType.SInt:
tex_display.rangeMin = -255.0
tex_display.rangeMax = 0.0
elif comp_type == rd.CompType.SNorm:
tex_display.rangeMin = -1.0
tex_display.rangeMax = 0.0
self.out.SetTextureDisplay(tex_display)
self.out.Display()
pixels: bytes = self.out.ReadbackOutputTexture()
dim = self.out.GetDimensions()
stencilpixels = None
# Grab stencil separately
if tex.format.type == rd.ResourceFormatType.D16S8 or tex.format.type == rd.ResourceFormatType.D24S8 or tex.format.type == rd.ResourceFormatType.D32S8:
tex_display.red = False
tex_display.green = True
tex_display.blue = False
tex_display.alpha = False
self.out.SetTextureDisplay(tex_display)
self.out.Display()
stencilpixels: bytes = self.out.ReadbackOutputTexture()
# Grab alpha if needed (since the readback output is RGB only)
if comp_count == 4 or tex.format.type == rd.ResourceFormatType.A8:
tex_display.red = False
tex_display.green = False
tex_display.blue = False
tex_display.alpha = True
self.out.SetTextureDisplay(tex_display)
self.out.Display()
alphapixels: bytes = self.out.ReadbackOutputTexture()
all_good = True
for x in range(max(1, tex.width >> mp)):
if not all_good:
break
for y in range(max(1, tex.height >> mp)):
expected = self.get_expected_value(
comp_count, comp_type, cur_sub, test_mode, tex,
x, y, z)
# for this test to work the expected values have to be within the range we selected for
# display above
for i in expected:
if i < tex_display.rangeMin or tex_display.rangeMax < i:
raise rdtest.TestFailureException(
"expected value {} is outside of texture display range! {} - {}"
.format(i, tex_display.rangeMin,
tex_display.rangeMax))
# convert the expected values to range-adapted values
for i in range(len(expected)):
expected[i] = (expected[i] -
tex_display.rangeMin) / (
tex_display.rangeMax -
tex_display.rangeMin)
# get the bytes from the displayed pixel
offs = y * dim[0] * 3 + x * 3
displayed = [
int(a) for a in pixels[offs:offs + comp_count]
]
if comp_count == 4:
del displayed[3]
displayed.append(int(alphapixels[offs]))
if stencilpixels is not None:
del displayed[1:]
displayed.append(int(stencilpixels[offs]))
if tex.format.type == rd.ResourceFormatType.A8:
displayed = [int(alphapixels[offs])]
# normalise the displayed values
for i in range(len(displayed)):
displayed[i] = float(displayed[i]) / 255.0
# For SRGB textures match linear picked values. We do this for alpha too since it's rendered
# via RGB
if comp_type == rd.CompType.UNormSRGB:
displayed[0:4] = [
srgb2linear(x) for x in displayed[0:4]
]
# alpha channel in 10:10:10:2 has extremely low precision, and the ULP requirements mean
# we basically can't trust anything between 0 and 1 on float formats. Just round in that
# case as it still lets us differentiate between alpha 0.0-0.5 and 0.5-1.0
if tex.format.type == rd.ResourceFormatType.R10G10B10A2 and comp_type != rd.CompType.UInt:
displayed[3] = round(displayed[3]) * 1.0
# Handle 1-bit alpha
if tex.format.type == rd.ResourceFormatType.R5G5B5A1:
displayed[
3] = 1.0 if displayed[3] >= 0.5 else 0.0
# Need an additional 1/255 epsilon to account for us going via a 8-bit backbuffer for display
if not rdtest.value_compare(
displayed, expected, 1.0 / 255.0 + eps):
#rdtest.log.print(
# "Quick-checking ({},{}) of slice {}, mip {}, sample {} of {} {} got {}. Expected {}.".format(
# x, y, sl, mp, sm, name, fmt_name, displayed, expected) +
# "Falling back to pixel picking tests.")
# Currently this seems to fail in some proxy scenarios with sRGB, but since it's not a
# real error we just silently swallow it
all_good = False
break
if all_good:
continue
for x in range(max(1, tex.width >> mp)):
for y in range(max(1, tex.height >> mp)):
expected = self.get_expected_value(
comp_count, comp_type, cur_sub, test_mode, tex,
x, y, z)
picked = self.get_picked_pixel_value(
comp_count, comp_type, cur_sub, tex, tex_id, x,
y)
if mp == 0 and sl == 0 and sm == 0 and x == 0 and y == 0:
value0 = picked
if not rdtest.value_compare(picked, expected, eps):
raise rdtest.TestFailureException(
"At ({},{}) of slice {}, mip {}, sample {} of {} {} got {}. Expected {}"
.format(x, y, sl, mp, sm, name, fmt_name,
picked, expected))
if not image_view:
output_tex = pipe.GetOutputTargets()[0].resourceId
# in the test captures pick the output texture, it should be identical to the
# (0,0) pixel in slice 0, mip 0, sample 0
view: rd.Viewport = pipe.GetViewport(0)
val: rd.PixelValue = self.pick(
pipe.GetOutputTargets()[0].resourceId,
int(view.x + view.width / 2), int(view.y + view.height / 2),
rd.Subresource(), rd.CompType.Typeless)
picked = list(val.floatValue)
# A8 picked values come out in alpha, but we want to compare against the single channel
if tex.format.type == rd.ResourceFormatType.A8:
picked[0] = picked[3]
# Clamp to number of components in the texture
picked = picked[0:comp_count]
# If we didn't get a value0 (because we did all texture render compares) then fetch it here
if len(value0) == 0:
value0 = self.get_picked_pixel_value(comp_count, comp_type,
rd.Subresource(), tex,
tex_id, 0, 0)
# Up-convert any non-float expected values to floats
value0 = [float(x) for x in value0]
# For depth/stencil images, one of either depth or stencil should match
if comp_type == rd.CompType.Depth and len(value0) == 2:
if picked[0] == 0.0:
value0[0] = 0.0
# normalise stencil value if it isn't already
if picked[1] > 1.0:
picked[1] /= 255.0
elif picked[0] > 1.0:
# un-normalised stencil being rendered in red, match against our stencil expectation
picked[0] /= 255.0
value0[0] = value0[1]
value0[1] = 0.0
else:
if picked[1] == 0.0:
value0[1] = 0.0
if picked[1] > 1.0:
picked[1] /= 255.0
if not rdtest.value_compare(picked, value0, eps):
raise rdtest.TestFailureException(
"In {} {} Top-left pixel as rendered is {}. Expected {}".
format(name, fmt_name, picked, value0))
def check_capture(self):
id = self.get_last_draw().copyDestination
tex_details = self.get_texture(id)
self.controller.SetFrameEvent(self.get_last_draw().eventId, True)
data = self.controller.GetTextureData(id, rd.Subresource(0, 0, 0))
first_pixel = struct.unpack_from("BBBB", data, 0)
val = [255, 0, 255, 255]
if not rdtest.value_compare(first_pixel, val):
raise rdtest.TestFailureException(
"First pixel should be clear color {}, not {}".format(
val, first_pixel))
magic_pixel = struct.unpack_from("BBBB", data,
(50 * tex_details.width + 320) * 4)
# allow 127 or 128 for alpha
val = [0, 0, 255, magic_pixel[3]]
if not rdtest.value_compare(magic_pixel,
val) or magic_pixel[3] not in [127, 128]:
raise rdtest.TestFailureException(
"Pixel @ 320,50 should be blue: {}, not {}".format(
val, magic_pixel))
rdtest.log.success("Decoded pixels from texture data are correct")
img_path = rdtest.get_tmp_path('preserved_alpha.png')
self.controller.SetFrameEvent(self.get_last_draw().eventId, True)
save_data = rd.TextureSave()
save_data.resourceId = id
save_data.destType = rd.FileType.PNG
save_data.alpha = rd.AlphaMapping.Discard # this should not discard the alpha
self.controller.SaveTexture(save_data, img_path)
data = rdtest.png_load_data(img_path)
magic_pixel = struct.unpack_from("BBBB", data[-1 - 50], 320 * 4)
val = [0, 0, 255, magic_pixel[3]]
if not rdtest.value_compare(magic_pixel,
val) or magic_pixel[3] not in [127, 128]:
raise rdtest.TestFailureException(
"Pixel @ 320,50 should be blue: {}, not {}".format(
val, magic_pixel))
draw = self.find_draw("Draw")
self.controller.SetFrameEvent(draw.eventId, False)
postvs_data = self.get_postvs(rd.MeshDataStage.VSOut, 0,
draw.numIndices)
postvs_ref = {
0: {
'vtx': 0,
'idx': 0,
'gl_Position': [-0.5, -0.5, 0.0, 1.0],
'v2fcol': [1.0, 0.0, 0.0, 1.0],
},
1: {
'vtx': 1,
'idx': 1,
'gl_Position': [0.0, 0.5, 0.0, 1.0],
'v2fcol': [0.0, 1.0, 0.0, 1.0],
},
2: {
'vtx': 2,
'idx': 2,
'gl_Position': [0.5, -0.5, 0.0, 1.0],
'v2fcol': [0.0, 0.0, 1.0, 1.0],
},
}
self.check_mesh_data(postvs_ref, postvs_data)
results = self.controller.FetchCounters([
rd.GPUCounter.RasterizedPrimitives, rd.GPUCounter.VSInvocations,
rd.GPUCounter.FSInvocations
])
results = [r for r in results if r.eventId == draw.eventId]
if len(results) != 3:
raise rdtest.TestFailureException(
"Expected 3 results, got {} results".format(len(results)))
for r in results:
r: rd.CounterResult
val = r.value.u32
if r.counter == rd.GPUCounter.RasterizedPrimitives:
if not rdtest.value_compare(val, 1):
raise rdtest.TestFailureException(
"RasterizedPrimitives result {} is not as expected".
format(val))
else:
rdtest.log.success(
"RasterizedPrimitives result is as expected")
elif r.counter == rd.GPUCounter.VSInvocations:
if not rdtest.value_compare(val, 3):
raise rdtest.TestFailureException(
"VSInvocations result {} is not as expected".format(
val))
else:
rdtest.log.success("VSInvocations result is as expected")
elif r.counter == rd.GPUCounter.FSInvocations:
if val < int(0.1 * tex_details.width * tex_details.height):
raise rdtest.TestFailureException(
"FSInvocations result {} is not as expected".format(
val))
else:
rdtest.log.success("FSInvocations result is as expected")
else:
raise rdtest.TestFailureException(
"Unexpected counter result {}".format(r.counter))
rdtest.log.success("Counter data retrieved successfully")
def check_capture(self):
out: rd.ReplayOutput = self.controller.CreateOutput(
rd.CreateHeadlessWindowingData(100, 100),
rd.ReplayOutputType.Texture)
self.check(out is not None)
test_marker: rd.DrawcallDescription = self.find_draw("Test")
self.controller.SetFrameEvent(test_marker.next.eventId, True)
pipe: rd.PipeState = self.controller.GetPipelineState()
tex = rd.TextureDisplay()
tex.resourceId = pipe.GetOutputTargets()[0].resourceId
# Check the actual output is as expected first.
# Background around the outside
self.check_pixel_value(tex.resourceId, 0.1, 0.1, [0.2, 0.2, 0.2, 1.0])
self.check_pixel_value(tex.resourceId, 0.8, 0.1, [0.2, 0.2, 0.2, 1.0])
self.check_pixel_value(tex.resourceId, 0.5, 0.95, [0.2, 0.2, 0.2, 1.0])
# Large dark grey triangle
self.check_pixel_value(tex.resourceId, 0.5, 0.1, [0.1, 0.1, 0.1, 1.0])
self.check_pixel_value(tex.resourceId, 0.5, 0.9, [0.1, 0.1, 0.1, 1.0])
self.check_pixel_value(tex.resourceId, 0.2, 0.9, [0.1, 0.1, 0.1, 1.0])
self.check_pixel_value(tex.resourceId, 0.8, 0.9, [0.1, 0.1, 0.1, 1.0])
# Red upper half triangle
self.check_pixel_value(tex.resourceId, 0.3, 0.4, [1.0, 0.0, 0.0, 1.0])
# Blue lower half triangle
self.check_pixel_value(tex.resourceId, 0.3, 0.6, [0.0, 0.0, 1.0, 1.0])
# Floating clipped triangle
self.check_pixel_value(tex.resourceId, 335, 140, [0.0, 0.0, 0.0, 1.0])
self.check_pixel_value(tex.resourceId, 340, 140, [0.2, 0.2, 0.2, 1.0])
# Triangle size triangles
self.check_pixel_value(tex.resourceId, 200, 51, [1.0, 0.5, 1.0, 1.0])
self.check_pixel_value(tex.resourceId, 200, 65, [1.0, 1.0, 0.0, 1.0])
self.check_pixel_value(tex.resourceId, 200, 79, [0.0, 1.0, 1.0, 1.0])
self.check_pixel_value(tex.resourceId, 200, 93, [0.0, 1.0, 0.0, 1.0])
for overlay in rd.DebugOverlay:
if overlay == rd.DebugOverlay.NoOverlay:
continue
# These overlays are just displaymodes really, not actually separate overlays
if overlay == rd.DebugOverlay.NaN or overlay == rd.DebugOverlay.Clipping:
continue
# Unfortunately line-fill rendering seems to vary too much by IHV, so gives inconsistent results
if overlay == rd.DebugOverlay.Wireframe:
continue
tex.overlay = overlay
out.SetTextureDisplay(tex)
overlay_path = rdtest.get_tmp_path(str(overlay) + '.png')
ref_path = self.get_ref_path(str(overlay) + '.png')
save_data = rd.TextureSave()
save_data.resourceId = out.GetDebugOverlayTexID()
save_data.destType = rd.FileType.PNG
save_data.typeCast = rd.CompType.Typeless
save_data.comp.blackPoint = 0.0
save_data.comp.whitePoint = 1.0
tolerance = 2
# These overlays return grayscale above 1, so rescale to an expected range.
if (overlay == rd.DebugOverlay.QuadOverdrawDraw
or overlay == rd.DebugOverlay.QuadOverdrawPass
or overlay == rd.DebugOverlay.TriangleSizeDraw
or overlay == rd.DebugOverlay.TriangleSizePass):
save_data.comp.whitePoint = 10.0
# These overlays modify the underlying texture, so we need to save it out instead of the overlay
if overlay == rd.DebugOverlay.ClearBeforeDraw or overlay == rd.DebugOverlay.ClearBeforePass:
save_data.resourceId = tex.resourceId
save_data.typeCast = rd.CompType.UNormSRGB
self.controller.SaveTexture(save_data, overlay_path)
if not rdtest.png_compare(overlay_path, ref_path, tolerance):
raise rdtest.TestFailureException(
"Reference and output image differ for overlay {}".format(
str(overlay)), overlay_path, ref_path)
rdtest.log.success(
"Reference and output image are identical for {}".format(
str(overlay)))
save_data = rd.TextureSave()
save_data.resourceId = pipe.GetDepthTarget().resourceId
save_data.destType = rd.FileType.PNG
save_data.channelExtract = 0
tmp_path = rdtest.get_tmp_path('depth.png')
ref_path = self.get_ref_path('depth.png')
self.controller.SaveTexture(save_data, tmp_path)
if not rdtest.png_compare(tmp_path, ref_path):
raise rdtest.TestFailureException(
"Reference and output image differ for depth {}", tmp_path,
ref_path)
rdtest.log.success(
"Reference and output image are identical for depth")
save_data.channelExtract = 1
tmp_path = rdtest.get_tmp_path('stencil.png')
ref_path = self.get_ref_path('stencil.png')
self.controller.SaveTexture(save_data, tmp_path)
if not rdtest.png_compare(tmp_path, ref_path):
raise rdtest.TestFailureException(
"Reference and output image differ for stencil {}", tmp_path,
ref_path)
rdtest.log.success(
"Reference and output image are identical for stencil")
self.check_clearbeforedraw_depth(out, pipe.GetDepthTarget().resourceId)
out.Shutdown()
def check_capture(self):
# Make an output so we can pick pixels
out: rd.ReplayOutput = self.controller.CreateOutput(
rd.CreateHeadlessWindowingData(100, 100),
rd.ReplayOutputType.Texture)
self.check(out is not None)
tex = rd.TextureDisplay()
# At each draw, the centre pixel of the viewport should be green
draw = self.get_first_draw()
while draw is not None:
self.controller.SetFrameEvent(draw.eventId, False)
if draw.flags & rd.DrawFlags.Drawcall:
tex.resourceId = self.controller.GetPipelineState(
).GetOutputTargets()[0].resourceId
out.SetTextureDisplay(tex)
view: rd.Viewport = self.controller.GetPipelineState(
).GetViewport(0)
x, y = int(view.x + view.width / 2), int(view.y +
view.height / 2)
# convert to top-left co-ordinates for use with PickPixel
y = self.get_texture(tex.resourceId).height - y
picked: rd.PixelValue = out.PickPixel(tex.resourceId, False, x,
y, 0, 0, 0)
if not rdtest.value_compare(picked.floatValue,
[0.0, 1.0, 0.0, 1.0]):
raise rdtest.TestFailureException(
"Picked value {} at {} doesn't match expected green".
format(picked.floatValue, (x, y)))
draw = draw.next
rdtest.log.success("Draws are all green")
# Now save the backbuffer to disk
ref_path = rdtest.get_tmp_path('backbuffer.png')
save_data = rd.TextureSave()
save_data.resourceId = tex.resourceId
save_data.destType = rd.FileType.PNG
self.controller.SaveTexture(save_data, ref_path)
# Open the capture and grab the thumbnail, check that it is all green too (dirty way of verifying we didn't
# break in-app updates but somehow end up with the right data)
cap = rd.OpenCaptureFile()
# Open a particular file
status = cap.OpenFile(self.capture_filename, '', None)
# Make sure the file opened successfully
if status != rd.ReplayStatus.Succeeded:
cap.Shutdown()
raise rdtest.TestFailureException("Couldn't open '{}': {}".format(
self.capture_filename, str(status)))
thumb: rd.Thumbnail = cap.GetThumbnail(rd.FileType.PNG, 0)
tmp_path = rdtest.get_tmp_path('thumbnail.png')
with open(tmp_path, 'wb') as f:
f.write(thumb.data)
# The original thumbnail should also be identical, since we have the uncompressed extended thumbnail.
if not rdtest.png_compare(tmp_path, ref_path):
raise rdtest.TestFailureException(
"Reference backbuffer and thumbnail image differ", tmp_path,
ref_path)
rdtest.log.success("Thumbnail is identical to reference")
out.Shutdown()
def check_capture(self):
action: rd.ActionDescription = self.find_action('glDraw')
while action is not None:
self.controller.SetFrameEvent(action.eventId, True)
self.check_triangle(fore=[0.2, 0.75, 0.2, 1.0])
pipe = self.controller.GetPipelineState()
depth = pipe.GetDepthTarget()
vp = pipe.GetViewport(0)
id = pipe.GetOutputTargets()[0].resourceId
mn, mx = self.controller.GetMinMax(id, rd.Subresource(), rd.CompType.Typeless)
if not rdtest.value_compare(mn.floatValue, [0.2, 0.2, 0.2, 1.0], eps=1.0/255.0):
raise rdtest.TestFailureException(
"Minimum color values {} are not as expected".format(mn.floatValue))
if not rdtest.value_compare(mx.floatValue, [0.2, 0.75, 0.2, 1.0], eps=1.0/255.0):
raise rdtest.TestFailureException(
"Maximum color values {} are not as expected".format(mx.floatValue))
hist = self.controller.GetHistogram(id, rd.Subresource(), rd.CompType.Typeless, 0.199, 0.75,
(False, True, False, False))
if hist[0] == 0 or hist[-1] == 0 or any([x > 0 for x in hist[1:-1]]):
raise rdtest.TestFailureException(
"Green histogram didn't return expected values, values should have landed in first or last bucket")
rdtest.log.success('Color Renderbuffer at action {} is working as expected'.format(action.eventId))
if depth.resourceId != rd.ResourceId():
val = self.controller.PickPixel(depth.resourceId, int(0.5 * vp.width), int(0.5 * vp.height),
rd.Subresource(), rd.CompType.Typeless)
if not rdtest.value_compare(val.floatValue[0], 0.75):
raise rdtest.TestFailureException(
"Picked value {} in triangle for depth doesn't match expectation".format(val))
mn, mx = self.controller.GetMinMax(depth.resourceId, rd.Subresource(), rd.CompType.Typeless)
hist = self.controller.GetHistogram(depth.resourceId, rd.Subresource(),
rd.CompType.Typeless, 0.75, 0.9, (True, False, False, False))
if not rdtest.value_compare(mn.floatValue[0], 0.75):
raise rdtest.TestFailureException(
"Minimum depth values {} are not as expected".format(mn.floatValue))
if not rdtest.value_compare(mx.floatValue[0], 0.9):
raise rdtest.TestFailureException(
"Maximum depth values {} are not as expected".format(mx.floatValue))
if hist[0] == 0 or hist[-1] == 0 or any([x > 0 for x in hist[1:-1]]):
raise rdtest.TestFailureException(
"Depth histogram didn't return expected values, values should have landed in first or last bucket")
rdtest.log.success('Depth Renderbuffer at action {} is working as expected'.format(action.eventId))
tex_details = self.get_texture(id)
if tex_details.msSamp > 1:
samples = []
for i in range(tex_details.msSamp):
samples.append(self.controller.GetTextureData(id, rd.Subresource(0, 0, i)))
for i in range(tex_details.msSamp):
for j in range(tex_details.msSamp):
if i == j:
continue
if samples[i] == samples[j]:
save_data = rd.TextureSave()
save_data.resourceId = id
save_data.destType = rd.FileType.PNG
save_data.slice.sliceIndex = 0
save_data.mip = 0
img_path0 = rdtest.get_tmp_path('sample{}.png'.format(i))
img_path1 = rdtest.get_tmp_path('sample{}.png'.format(j))
save_data.sample.sampleIndex = i
self.controller.SaveTexture(save_data, img_path0)
save_data.sample.sampleIndex = j
self.controller.SaveTexture(save_data, img_path1)
raise rdtest.TestFailureException("Two MSAA samples returned the same data", img_path0, img_path1)
action: rd.ActionDescription = self.find_action('glDraw', action.eventId+1)
rdtest.log.success('All renderbuffers checked and rendered correctly')
def check_capture(self):
draw: rd.DrawcallDescription = self.find_draw("Degenerate")
self.controller.SetFrameEvent(draw.next.eventId, True)
pipe: rd.VKState = self.controller.GetVulkanPipelineState()
if pipe.multisample.rasterSamples != 4:
raise rdtest.TestFailureException(
"MSAA sample count is {}, not 1".format(
pipe.multisample.rasterSamples))
sampleLoc: rd.VKSampleLocations = pipe.multisample.sampleLocations
if sampleLoc.gridWidth != 1:
raise rdtest.TestFailureException(
"Sample locations grid width is {}, not 1".format(
sampleLoc.gridWidth))
if sampleLoc.gridHeight != 1:
raise rdtest.TestFailureException(
"Sample locations grid height is {}, not 1".format(
sampleLoc.gridHeight))
# [0] and [1] should be identical, as should [2] and [3], but they should be different from each other
if not sampleLoc.customLocations[0] == sampleLoc.customLocations[1]:
raise rdtest.TestFailureException(
"In degenerate case, sample locations [0] and [1] don't match: {} vs {}"
.format(sampleLoc.customLocations[0],
sampleLoc.customLocations[1]))
if not sampleLoc.customLocations[2] == sampleLoc.customLocations[3]:
raise rdtest.TestFailureException(
"In degenerate case, sample locations [2] and [3] don't match: {} vs {}"
.format(sampleLoc.customLocations[2],
sampleLoc.customLocations[3]))
if sampleLoc.customLocations[1] == sampleLoc.customLocations[2]:
raise rdtest.TestFailureException(
"In degenerate case, sample locations [1] and [2] DO match: {} vs {}"
.format(sampleLoc.customLocations[1],
sampleLoc.customLocations[2]))
draw: rd.DrawcallDescription = self.find_draw("Rotated")
self.controller.SetFrameEvent(draw.next.eventId, True)
pipe: rd.VKState = self.controller.GetVulkanPipelineState()
if pipe.multisample.rasterSamples != 4:
raise rdtest.TestFailureException(
"MSAA sample count is {}, not 1".format(
pipe.multisample.rasterSamples))
sampleLoc: rd.VKSampleLocations = pipe.multisample.sampleLocations
if sampleLoc.gridWidth != 1:
raise rdtest.TestFailureException(
"Sample locations grid width is {}, not 1".format(
sampleLoc.gridWidth))
if sampleLoc.gridHeight != 1:
raise rdtest.TestFailureException(
"Sample locations grid height is {}, not 1".format(
sampleLoc.gridHeight))
# All sample locations should be unique
if sampleLoc.customLocations[0] == sampleLoc.customLocations[1]:
raise rdtest.TestFailureException(
"In rotated case, sample locations [0] and [1] DO match: {} vs {}"
.format(sampleLoc.customLocations[0],
sampleLoc.customLocations[1]))
if sampleLoc.customLocations[1] == sampleLoc.customLocations[2]:
raise rdtest.TestFailureException(
"In rotated case, sample locations [1] and [2] DO match: {} vs {}"
.format(sampleLoc.customLocations[1],
sampleLoc.customLocations[2]))
if sampleLoc.customLocations[2] == sampleLoc.customLocations[3]:
raise rdtest.TestFailureException(
"In rotated case, sample locations [2] and [3] DO match: {} vs {}"
.format(sampleLoc.customLocations[2],
sampleLoc.customLocations[3]))
rdtest.log.success("Pipeline state is correct")
# Grab the multisampled image's ID here
save_data = rd.TextureSave()
curpass: rd.VKCurrentPass = pipe.currentPass
save_data.resourceId = curpass.framebuffer.attachments[
curpass.renderpass.colorAttachments[0]].imageResourceId
save_data.destType = rd.FileType.PNG
save_data.sample.mapToArray = False
dim = (0, 0)
texs = self.controller.GetTextures()
for tex in texs:
if tex.resourceId == save_data.resourceId:
dim = (tex.width, tex.height)
if dim == (0, 0):
raise rdtest.TestFailureException(
"Couldn't get dimensions of texture")
last_draw: rd.DrawcallDescription = self.get_last_draw()
self.controller.SetFrameEvent(last_draw.eventId, True)
# Due to the variability of rasterization between implementations or even drivers,
# we don't want to check against a 'known good'.
# So instead we verify that at the first degenerate draw each pair of two sample's images are identical and that
# in the rotated grid case each sample's image is distinct.
# In future we could also check that the degenerate case 'stretches' the triangle up, as with the way the
# geometry is defined the second sample image should be a superset (i.e. strictly more samples covered).
rotated_paths = []
degenerate_paths = []
for sample in range(0, 4):
tmp_path = rdtest.get_tmp_path('sample{}.png'.format(sample))
degenerate_path = rdtest.get_tmp_path(
'degenerate{}.png'.format(sample))
rotated_path = rdtest.get_tmp_path('rotated{}.png'.format(sample))
rotated_paths.append(rotated_path)
degenerate_paths.append(degenerate_path)
save_data.sample.sampleIndex = sample
self.controller.SaveTexture(save_data, tmp_path)
try:
img = Image.open(tmp_path)
except Exception as ex:
raise FileNotFoundError("Can't open {}".format(
rdtest.sanitise_filename(tmp_path)))
img.crop((0, 0, dim[0] / 2, dim[1])).save(degenerate_path)
img.crop((dim[0] / 2, 0, dim[0], dim[1])).save(rotated_path)
# first two degenerate images should be identical, as should the last two, and they should be different.
if not rdtest.image_compare(degenerate_paths[0], degenerate_paths[1],
0):
raise rdtest.TestFailureException(
"Degenerate grid sample 0 and 1 are different",
degenerate_paths[0], degenerate_paths[1])
if not rdtest.image_compare(degenerate_paths[2], degenerate_paths[3],
0):
raise rdtest.TestFailureException(
"Degenerate grid sample 2 and 3 are different",
degenerate_paths[2], degenerate_paths[3])
if rdtest.image_compare(degenerate_paths[1], degenerate_paths[2], 0):
raise rdtest.TestFailureException(
"Degenerate grid sample 1 and 2 are identical",
degenerate_paths[1], degenerate_paths[2])
rdtest.log.success("Degenerate grid sample images are as expected")
# all rotated images should be different
for A in range(0, 4):
for B in range(A + 1, 4):
if rdtest.image_compare(rotated_paths[A], rotated_paths[B], 0):
raise rdtest.TestFailureException(
"Rotated grid sample {} and {} are identical".format(
A, B), rotated_paths[A], rotated_paths[B])
rdtest.log.success("Rotated grid sample images are as expected")
def check_capture(self):
self.check_final_backbuffer()
out: rd.ReplayOutput = self.controller.CreateOutput(rd.CreateHeadlessWindowingData(), rd.ReplayOutputType.Texture)
self.check(out is not None)
out.SetDimensions(100, 100)
test_marker: rd.DrawcallDescription = self.find_draw("Test")
self.controller.SetFrameEvent(test_marker.next.eventId, True)
pipe: rd.PipeState = self.controller.GetPipelineState()
tex = rd.TextureDisplay()
tex.resourceId = pipe.GetOutputTargets()[0].resourceId
for overlay in rd.DebugOverlay:
if overlay == rd.DebugOverlay.NoOverlay:
continue
# These overlays are just displaymodes really, not actually separate overlays
if overlay == rd.DebugOverlay.NaN or overlay == rd.DebugOverlay.Clipping:
continue
# Unfortunately line-fill rendering seems to vary too much by IHV, so gives inconsistent results
if overlay == rd.DebugOverlay.Wireframe:
continue
tex.overlay = overlay
out.SetTextureDisplay(tex)
overlay_path = rdtest.get_tmp_path(str(overlay) + '.png')
ref_path = self.get_ref_path(str(overlay) + '.png')
save_data = rd.TextureSave()
save_data.resourceId = out.GetDebugOverlayTexID()
save_data.destType = rd.FileType.PNG
save_data.comp.blackPoint = 0.0
save_data.comp.whitePoint = 1.0
tolerance = 2
# These overlays return grayscale above 1, so rescale to an expected range.
if (overlay == rd.DebugOverlay.QuadOverdrawDraw or overlay == rd.DebugOverlay.QuadOverdrawPass or
overlay == rd.DebugOverlay.TriangleSizeDraw or overlay == rd.DebugOverlay.TriangleSizePass):
save_data.comp.whitePoint = 10.0
# These overlays modify the underlying texture, so we need to save it out instead of the overlay
if overlay == rd.DebugOverlay.ClearBeforeDraw or overlay == rd.DebugOverlay.ClearBeforePass:
save_data.resourceId = tex.resourceId
self.controller.SaveTexture(save_data, overlay_path)
if not rdtest.image_compare(overlay_path, ref_path, tolerance):
raise rdtest.TestFailureException("Reference and output image differ for overlay {}".format(str(overlay)), overlay_path, ref_path)
rdtest.log.success("Reference and output image are identical for {}".format(str(overlay)))
save_data = rd.TextureSave()
save_data.resourceId = pipe.GetDepthTarget().resourceId
save_data.destType = rd.FileType.PNG
save_data.channelExtract = 0
tmp_path = rdtest.get_tmp_path('depth.png')
ref_path = self.get_ref_path('depth.png')
self.controller.SaveTexture(save_data, tmp_path)
if not rdtest.image_compare(tmp_path, ref_path):
raise rdtest.TestFailureException("Reference and output image differ for depth {}", tmp_path, ref_path)
rdtest.log.success("Reference and output image are identical for depth")
save_data.channelExtract = 1
tmp_path = rdtest.get_tmp_path('stencil.png')
ref_path = self.get_ref_path('stencil.png')
self.controller.SaveTexture(save_data, tmp_path)
if not rdtest.image_compare(tmp_path, ref_path):
raise rdtest.TestFailureException("Reference and output image differ for stencil {}", tmp_path, ref_path)
rdtest.log.success("Reference and output image are identical for stencil")
out.Shutdown()
def check_capture(self):
action: rd.ActionDescription = self.find_action("Degenerate")
self.controller.SetFrameEvent(action.next.eventId, True)
pipe: rd.VKState = self.controller.GetVulkanPipelineState()
if pipe.multisample.rasterSamples != 4:
raise rdtest.TestFailureException("MSAA sample count is {}, not 1".format(pipe.multisample.rasterSamples))
sampleLoc: rd.VKSampleLocations = pipe.multisample.sampleLocations
if sampleLoc.gridWidth != 1:
raise rdtest.TestFailureException("Sample locations grid width is {}, not 1".format(sampleLoc.gridWidth))
if sampleLoc.gridHeight != 1:
raise rdtest.TestFailureException("Sample locations grid height is {}, not 1".format(sampleLoc.gridHeight))
# [0] and [1] should be identical, as should [2] and [3], but they should be different from each other
if not sampleLoc.customLocations[0] == sampleLoc.customLocations[1]:
raise rdtest.TestFailureException("In degenerate case, sample locations [0] and [1] don't match: {} vs {}"
.format(sampleLoc.customLocations[0], sampleLoc.customLocations[1]))
if not sampleLoc.customLocations[2] == sampleLoc.customLocations[3]:
raise rdtest.TestFailureException("In degenerate case, sample locations [2] and [3] don't match: {} vs {}"
.format(sampleLoc.customLocations[2], sampleLoc.customLocations[3]))
if sampleLoc.customLocations[1] == sampleLoc.customLocations[2]:
raise rdtest.TestFailureException("In degenerate case, sample locations [1] and [2] DO match: {} vs {}"
.format(sampleLoc.customLocations[1], sampleLoc.customLocations[2]))
action: rd.ActionDescription = self.find_action("Rotated")
self.controller.SetFrameEvent(action.next.eventId, True)
pipe: rd.VKState = self.controller.GetVulkanPipelineState()
if pipe.multisample.rasterSamples != 4:
raise rdtest.TestFailureException("MSAA sample count is {}, not 1".format(pipe.multisample.rasterSamples))
sampleLoc: rd.VKSampleLocations = pipe.multisample.sampleLocations
if sampleLoc.gridWidth != 1:
raise rdtest.TestFailureException("Sample locations grid width is {}, not 1".format(sampleLoc.gridWidth))
if sampleLoc.gridHeight != 1:
raise rdtest.TestFailureException("Sample locations grid height is {}, not 1".format(sampleLoc.gridHeight))
# All sample locations should be unique
if sampleLoc.customLocations[0] == sampleLoc.customLocations[1]:
raise rdtest.TestFailureException("In rotated case, sample locations [0] and [1] DO match: {} vs {}"
.format(sampleLoc.customLocations[0], sampleLoc.customLocations[1]))
if sampleLoc.customLocations[1] == sampleLoc.customLocations[2]:
raise rdtest.TestFailureException("In rotated case, sample locations [1] and [2] DO match: {} vs {}"
.format(sampleLoc.customLocations[1], sampleLoc.customLocations[2]))
if sampleLoc.customLocations[2] == sampleLoc.customLocations[3]:
raise rdtest.TestFailureException("In rotated case, sample locations [2] and [3] DO match: {} vs {}"
.format(sampleLoc.customLocations[2], sampleLoc.customLocations[3]))
rdtest.log.success("Pipeline state is correct")
# Grab the multisampled image's ID here
save_data = rd.TextureSave()
curpass: rd.VKCurrentPass = pipe.currentPass
save_data.resourceId = curpass.framebuffer.attachments[curpass.renderpass.colorAttachments[0]].imageResourceId
save_data.destType = rd.FileType.PNG
save_data.sample.mapToArray = False
dim = (0, 0)
fmt: rd.ResourceFormat = None
texs = self.controller.GetTextures()
for tex in texs:
tex: rd.TextureDescription
if tex.resourceId == save_data.resourceId:
dim = (tex.width, tex.height)
fmt = tex.format
if dim == (0,0):
raise rdtest.TestFailureException("Couldn't get dimensions of texture")
halfdim = (dim[0] >> 1, dim[1])
if (fmt.type != rd.ResourceFormatType.Regular or fmt.compByteWidth != 1 or fmt.compCount != 4):
raise rdtest.TestFailureException("Texture is not RGBA8 as expected: {}".format(fmt.Name()))
stride = fmt.compByteWidth * fmt.compCount * dim[0]
last_action: rd.ActionDescription = self.get_last_action()
self.controller.SetFrameEvent(last_action.eventId, True)
# Due to the variability of rasterization between implementations or even drivers,
# we don't want to check against a 'known good'.
# So instead we verify that at the first degenerate action each pair of two sample's images are identical and that
# in the rotated grid case each sample's image is distinct.
# In future we could also check that the degenerate case 'stretches' the triangle up, as with the way the
# geometry is defined the second sample image should be a superset (i.e. strictly more samples covered).
rotated_paths = []
degenerate_paths = []
for sample in range(0, 4):
tmp_path = rdtest.get_tmp_path('sample{}.png'.format(sample))
degenerate_path = rdtest.get_tmp_path('degenerate{}.png'.format(sample))
rotated_path = rdtest.get_tmp_path('rotated{}.png'.format(sample))
rotated_paths.append(rotated_path)
degenerate_paths.append(degenerate_path)
save_data.sample.sampleIndex = sample
self.controller.SaveTexture(save_data, tmp_path)
combined_data = rdtest.png_load_data(tmp_path)
# crop left for degenerate, and crop right for rotated
degenerate = []
rotated = []
for row in range(0, dim[1]):
srcstart = row * stride
len = halfdim[0] * fmt.compCount
degenerate.append(combined_data[row][0:len])
rotated.append(combined_data[row][len:])
rdtest.png_save(degenerate_path, degenerate, halfdim, True)
rdtest.png_save(rotated_path, rotated, halfdim, True)
# first two degenerate images should be identical, as should the last two, and they should be different.
if not rdtest.png_compare(degenerate_paths[0], degenerate_paths[1], 0):
raise rdtest.TestFailureException("Degenerate grid sample 0 and 1 are different",
degenerate_paths[0], degenerate_paths[1])
if not rdtest.png_compare(degenerate_paths[2], degenerate_paths[3], 0):
raise rdtest.TestFailureException("Degenerate grid sample 2 and 3 are different",
degenerate_paths[2], degenerate_paths[3])
if rdtest.png_compare(degenerate_paths[1], degenerate_paths[2], 0):
raise rdtest.TestFailureException("Degenerate grid sample 1 and 2 are identical",
degenerate_paths[1], degenerate_paths[2])
rdtest.log.success("Degenerate grid sample images are as expected")
# all rotated images should be different
for A in range(0, 4):
for B in range(A+1, 4):
if rdtest.png_compare(rotated_paths[A], rotated_paths[B], 0):
raise rdtest.TestFailureException("Rotated grid sample {} and {} are identical".format(A, B),
rotated_paths[A], rotated_paths[B])
rdtest.log.success("Rotated grid sample images are as expected")
def check_capture(self):
id = self.get_last_draw().copyDestination
tex_details = self.get_texture(id)
self.controller.SetFrameEvent(self.get_last_draw().eventId, True)
data = self.controller.GetTextureData(id, rd.Subresource(0, 0, 0))
first_pixel = struct.unpack_from("BBBB", data, 0)
val = [255, 0, 255, 255]
if not rdtest.value_compare(first_pixel, val):
raise rdtest.TestFailureException(
"First pixel should be clear color {}, not {}".format(
val, first_pixel))
magic_pixel = struct.unpack_from("BBBB", data,
(50 * tex_details.width + 320) * 4)
# allow 127 or 128 for alpha
val = [0, 0, 255, magic_pixel[3]]
if not rdtest.value_compare(magic_pixel,
val) or magic_pixel[3] not in [127, 128]:
raise rdtest.TestFailureException(
"Pixel @ 320,50 should be blue: {}, not {}".format(
val, magic_pixel))
rdtest.log.success("Decoded pixels from texture data are correct")
img_path = rdtest.get_tmp_path('preserved_alpha.png')
self.controller.SetFrameEvent(self.get_last_draw().eventId, True)
save_data = rd.TextureSave()
save_data.resourceId = id
save_data.destType = rd.FileType.PNG
save_data.alpha = rd.AlphaMapping.Discard # this should not discard the alpha
self.controller.SaveTexture(save_data, img_path)
data = rdtest.png_load_data(img_path)
magic_pixel = struct.unpack_from("BBBB", data[-1 - 50], 320 * 4)
val = [0, 0, 255, magic_pixel[3]]
if not rdtest.value_compare(magic_pixel,
val) or magic_pixel[3] not in [127, 128]:
raise rdtest.TestFailureException(
"Pixel @ 320,50 should be blue: {}, not {}".format(
val, magic_pixel))
draw = self.find_draw("Draw")
self.controller.SetFrameEvent(draw.eventId, False)
postvs_data = self.get_postvs(draw, rd.MeshDataStage.VSOut, 0,
draw.numIndices)
postvs_ref = {
0: {
'vtx': 0,
'idx': 0,
'gl_Position': [-0.5, -0.5, 0.0, 1.0],
'v2fcol': [0.0, 1.0, 0.0, 1.0],
},
1: {
'vtx': 1,
'idx': 1,
'gl_Position': [0.0, 0.5, 0.0, 1.0],
'v2fcol': [0.0, 1.0, 0.0, 1.0],
},
2: {
'vtx': 2,
'idx': 2,
'gl_Position': [0.5, -0.5, 0.0, 1.0],
'v2fcol': [0.0, 1.0, 0.0, 1.0],
},
}
self.check_mesh_data(postvs_ref, postvs_data)
results = self.controller.FetchCounters([
rd.GPUCounter.RasterizedPrimitives, rd.GPUCounter.VSInvocations,
rd.GPUCounter.FSInvocations
])
results = [r for r in results if r.eventId == draw.eventId]
if len(results) != 3:
raise rdtest.TestFailureException(
"Expected 3 results, got {} results".format(len(results)))
for r in results:
r: rd.CounterResult
val = r.value.u32
if r.counter == rd.GPUCounter.RasterizedPrimitives:
if not rdtest.value_compare(val, 1):
raise rdtest.TestFailureException(
"RasterizedPrimitives result {} is not as expected".
format(val))
else:
rdtest.log.success(
"RasterizedPrimitives result is as expected")
elif r.counter == rd.GPUCounter.VSInvocations:
if not rdtest.value_compare(val, 3):
raise rdtest.TestFailureException(
"VSInvocations result {} is not as expected".format(
val))
else:
rdtest.log.success("VSInvocations result is as expected")
elif r.counter == rd.GPUCounter.FSInvocations:
if val < int(0.1 * tex_details.width * tex_details.height):
raise rdtest.TestFailureException(
"FSInvocations result {} is not as expected".format(
val))
else:
rdtest.log.success("FSInvocations result is as expected")
else:
raise rdtest.TestFailureException(
"Unexpected counter result {}".format(r.counter))
rdtest.log.success("Counter data retrieved successfully")
draw = self.find_draw("NoScissor")
self.check(draw is not None)
draw = draw.next
pipe: rd.PipeState = self.controller.GetPipelineState()
tex = rd.TextureDisplay()
tex.overlay = rd.DebugOverlay.Drawcall
tex.resourceId = pipe.GetOutputTargets()[0].resourceId
out: rd.ReplayOutput = self.controller.CreateOutput(
rd.CreateHeadlessWindowingData(100, 100),
rd.ReplayOutputType.Texture)
out.SetTextureDisplay(tex)
out.Display()
overlay_id = out.GetDebugOverlayTexID()
v = pipe.GetViewport(0)
self.check_pixel_value(overlay_id,
int(0.5 * v.width),
int(0.5 * v.height), [0.8, 0.1, 0.8, 1.0],
eps=1.0 / 256.0)
out.Shutdown()
rdtest.log.success("Overlay color is as expected")
def check_capture(self):
out: rd.ReplayOutput = self.controller.CreateOutput(rd.CreateHeadlessWindowingData(100, 100), rd.ReplayOutputType.Texture)
self.check(out is not None)
api: rd.GraphicsAPI = self.controller.GetAPIProperties().pipelineType
# Check the actual output is as expected first.
for is_msaa in [False, True]:
if is_msaa:
test_marker: rd.DrawcallDescription = self.find_draw("MSAA Test")
else:
test_marker: rd.DrawcallDescription = self.find_draw("Normal Test")
self.controller.SetFrameEvent(test_marker.next.eventId, True)
pipe: rd.PipeState = self.controller.GetPipelineState()
col_tex: rd.ResourceId = pipe.GetOutputTargets()[0].resourceId
tex = rd.TextureDisplay()
tex.resourceId = col_tex
tex.subresource.sample = 0
# Background around the outside
self.check_pixel_value(col_tex, 0.1, 0.1, [0.2, 0.2, 0.2, 1.0])
self.check_pixel_value(col_tex, 0.8, 0.1, [0.2, 0.2, 0.2, 1.0])
self.check_pixel_value(col_tex, 0.5, 0.95, [0.2, 0.2, 0.2, 1.0])
# Large dark grey triangle
self.check_pixel_value(col_tex, 0.5, 0.1, [0.1, 0.1, 0.1, 1.0])
self.check_pixel_value(col_tex, 0.5, 0.9, [0.1, 0.1, 0.1, 1.0])
self.check_pixel_value(col_tex, 0.2, 0.9, [0.1, 0.1, 0.1, 1.0])
self.check_pixel_value(col_tex, 0.8, 0.9, [0.1, 0.1, 0.1, 1.0])
# Red upper half triangle
self.check_pixel_value(col_tex, 0.3, 0.4, [1.0, 0.0, 0.0, 1.0])
# Blue lower half triangle
self.check_pixel_value(col_tex, 0.3, 0.6, [0.0, 0.0, 1.0, 1.0])
# Floating clipped triangle
self.check_pixel_value(col_tex, 335, 140, [0.0, 0.0, 0.0, 1.0])
self.check_pixel_value(col_tex, 340, 140, [0.2, 0.2, 0.2, 1.0])
# Triangle size triangles
self.check_pixel_value(col_tex, 200, 51, [1.0, 0.5, 1.0, 1.0])
self.check_pixel_value(col_tex, 200, 65, [1.0, 1.0, 0.0, 1.0])
self.check_pixel_value(col_tex, 200, 79, [0.0, 1.0, 1.0, 1.0])
self.check_pixel_value(col_tex, 200, 93, [0.0, 1.0, 0.0, 1.0])
for overlay in rd.DebugOverlay:
if overlay == rd.DebugOverlay.NoOverlay:
continue
# These overlays are just displaymodes really, not actually separate overlays
if overlay == rd.DebugOverlay.NaN or overlay == rd.DebugOverlay.Clipping:
continue
# We'll test the clear-before-X overlays seperately, for both colour and depth
if overlay == rd.DebugOverlay.ClearBeforeDraw or overlay == rd.DebugOverlay.ClearBeforePass:
continue
rdtest.log.print("Checking overlay {} in {} main draw".format("MSAA" if is_msaa else "normal", str(overlay)))
tex.overlay = overlay
out.SetTextureDisplay(tex)
out.Display()
eps = 1.0 / 256.0
overlay_id: rd.ResourceId = out.GetDebugOverlayTexID()
# We test a few key spots:
# 4 points along the left side of the big triangle, above/in/below its intersection with the tri behind
# 4 points outside all triangles
# The overlap between the big tri and the bottom tri, and between it and the right backface culled tri
# The bottom tri's part that sticks out
# The two parts of the backface culled tri that stick out
# The depth clipped tri, in and out of clipping
# The 4 triangle size test triangles
if overlay == rd.DebugOverlay.Drawcall:
self.check_pixel_value(overlay_id, 150, 90, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 130, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 160, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 200, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 60, [0.0, 0.0, 0.0, 0.5], eps=eps)
self.check_pixel_value(overlay_id, 125, 250, [0.0, 0.0, 0.0, 0.5], eps=eps)
self.check_pixel_value(overlay_id, 250, 60, [0.0, 0.0, 0.0, 0.5], eps=eps)
self.check_pixel_value(overlay_id, 250, 250, [0.0, 0.0, 0.0, 0.5], eps=eps)
self.check_pixel_value(overlay_id, 220, 175, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 150, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 190, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 285, 135, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 285, 165, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 330, 145, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 340, 145, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 51, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 65, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 79, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 93, [0.8, 0.1, 0.8, 1.0], eps=eps)
elif overlay == rd.DebugOverlay.Wireframe:
# Wireframe we only test a limited set to avoid hitting implementation variations of line raster
# We also have to fudge a little because the lines might land on adjacent pixels
# Also to be safe we don't run this test on MSAA
if not is_msaa:
x = 142
picked: rd.PixelValue = self.controller.PickPixel(overlay_id, x, 150, rd.Subresource(), rd.CompType.Typeless)
if picked.floatValue[3] == 0.0:
x = 141
picked: rd.PixelValue = self.controller.PickPixel(overlay_id, x, 150, rd.Subresource(), rd.CompType.Typeless)
self.check_pixel_value(overlay_id, x, 90, [200.0/255.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, x, 130, [200.0/255.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, x, 160, [200.0/255.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, x, 200, [200.0/255.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 60, [200.0/255.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 250, [200.0/255.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 60, [200.0/255.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 250, [200.0/255.0, 1.0, 0.0, 0.0], eps=eps)
y = 149
picked: rd.PixelValue = self.controller.PickPixel(overlay_id, 325, y, rd.Subresource(), rd.CompType.Typeless)
if picked.floatValue[3] == 0.0:
y = 150
self.check_pixel_value(overlay_id, 325, y, [200.0/255.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 340, y, [200.0/255.0, 1.0, 0.0, 1.0], eps=eps)
elif overlay == rd.DebugOverlay.Depth:
self.check_pixel_value(overlay_id, 150, 90, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 130, [0.0, 1.0, 0.0, 1.0], eps=eps)
# Intersection with lesser depth - depth fail
self.check_pixel_value(overlay_id, 150, 160, [1.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 200, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 60, [0.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 250, [0.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 60, [0.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 250, [0.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 175, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 150, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 190, [0.0, 1.0, 0.0, 1.0], eps=eps)
# Backface culled triangle
self.check_pixel_value(overlay_id, 285, 135, [1.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 285, 165, [1.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 330, 145, [0.0, 1.0, 0.0, 1.0], eps=eps)
# Depth clipped part of tri
self.check_pixel_value(overlay_id, 340, 145, [1.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 51, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 65, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 79, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 93, [0.0, 1.0, 0.0, 1.0], eps=eps)
elif overlay == rd.DebugOverlay.Stencil:
self.check_pixel_value(overlay_id, 150, 90, [0.0, 1.0, 0.0, 1.0], eps=eps)
# Intersection with different stencil - stencil fail
self.check_pixel_value(overlay_id, 150, 130, [1.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 160, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 200, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 60, [0.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 250, [0.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 60, [0.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 250, [0.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 175, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 150, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 190, [0.0, 1.0, 0.0, 1.0], eps=eps)
# Backface culled triangle
self.check_pixel_value(overlay_id, 285, 135, [1.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 285, 165, [1.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 330, 145, [0.0, 1.0, 0.0, 1.0], eps=eps)
# Depth clipped part of tri
self.check_pixel_value(overlay_id, 340, 145, [1.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 51, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 65, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 79, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 93, [0.0, 1.0, 0.0, 1.0], eps=eps)
elif overlay == rd.DebugOverlay.BackfaceCull:
self.check_pixel_value(overlay_id, 150, 90, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 130, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 160, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 200, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 60, [0.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 250, [0.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 60, [0.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 250, [0.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 175, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 150, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 190, [0.0, 1.0, 0.0, 1.0], eps=eps)
# Backface culled triangle
self.check_pixel_value(overlay_id, 285, 135, [1.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 285, 165, [1.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 330, 145, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 340, 145, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 51, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 65, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 79, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 93, [0.0, 1.0, 0.0, 1.0], eps=eps)
elif overlay == rd.DebugOverlay.ViewportScissor:
# Inside viewport
self.check_pixel_value(overlay_id, 50, 50, [0.2 * 0.4, 0.2 * 0.4, 0.9 * 0.4, 0.4 * 0.4], eps=eps)
self.check_pixel_value(overlay_id, 350, 50, [0.2 * 0.4, 0.2 * 0.4, 0.9 * 0.4, 0.4 * 0.4], eps=eps)
self.check_pixel_value(overlay_id, 50, 250, [0.2 * 0.4, 0.2 * 0.4, 0.9 * 0.4, 0.4 * 0.4], eps=eps)
self.check_pixel_value(overlay_id, 350, 250, [0.2 * 0.4, 0.2 * 0.4, 0.9 * 0.4, 0.4 * 0.4], eps=eps)
# Passing triangle inside the viewport
self.check_pixel_value(overlay_id, 200, 150,
[0.2 * 0.4, 1.0 * 0.6 + 0.2 * 0.4, 0.9 * 0.4, 1.0 * 0.6 + 0.4 * 0.4], eps=eps)
# Viewport border
self.check_pixel_value(overlay_id, 12, 12, [0.1, 0.1, 0.1, 1.0], eps=eps)
# Outside viewport (not on scissor border)
self.check_pixel_value(overlay_id, 6, 6, [0.0, 0.0, 0.0, 0.0], eps=eps)
# Scissor border
self.check_pixel_value(overlay_id, 0, 0, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 20, 0, [0.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 40, 0, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 60, 0, [0.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 60, 0, [0.0, 0.0, 0.0, 1.0], eps=eps)
elif overlay == rd.DebugOverlay.QuadOverdrawDraw:
# This would require extreme command buffer patching to de-MSAA the framebuffer and renderpass
if api == rd.GraphicsAPI.Vulkan and is_msaa:
rdtest.log.print("Quad overdraw not currently supported on MSAA on Vulkan")
continue
self.check_pixel_value(overlay_id, 150, 90, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 130, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 160, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 200, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 60, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 250, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 60, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 250, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 175, [2.0, 2.0, 2.0, 2.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 150, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 190, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 285, 135, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 285, 165, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 330, 145, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 340, 145, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 51, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 65, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 79, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 93, [1.0, 1.0, 1.0, 1.0], eps=eps)
elif overlay == rd.DebugOverlay.QuadOverdrawPass:
# This would require extreme command buffer patching to de-MSAA the framebuffer and renderpass
if api == rd.GraphicsAPI.Vulkan and is_msaa:
rdtest.log.print("Quad overdraw not currently supported on MSAA on Vulkan")
continue
self.check_pixel_value(overlay_id, 150, 90, [1.0, 1.0, 1.0, 1.0], eps=eps)
# Do an extra tap here where we overlap with the extreme-background largest triangle, to show that
# overdraw
self.check_pixel_value(overlay_id, 150, 100, [2.0, 2.0, 2.0, 2.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 130, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 160, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 200, [2.0, 2.0, 2.0, 2.0], eps=eps)
# Two of these have overdraw from the pass due to the large background triangle
self.check_pixel_value(overlay_id, 125, 60, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 250, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 60, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 250, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 175, [3.0, 3.0, 3.0, 3.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 150, [2.0, 2.0, 2.0, 2.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 190, [2.0, 2.0, 2.0, 2.0], eps=eps)
self.check_pixel_value(overlay_id, 285, 135, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 285, 165, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 330, 145, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 340, 145, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 51, [2.0, 2.0, 2.0, 2.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 65, [2.0, 2.0, 2.0, 2.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 79, [2.0, 2.0, 2.0, 2.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 93, [2.0, 2.0, 2.0, 2.0], eps=eps)
elif overlay == rd.DebugOverlay.TriangleSizeDraw:
eps = 1.0
self.check_pixel_value(overlay_id, 150, 90, [10632.0, 10632.0, 10632.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 130, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 160, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 200, [10632.0, 10632.0, 10632.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 60, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 250, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 60, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 250, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 175, [2128.0, 2128.0, 2128.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 150, [10632.0, 10632.0, 10632.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 190, [2128.0, 2128.0, 2128.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 285, 135, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 285, 165, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 330, 145, [531.0, 531.0, 531.0, 531.0], eps=eps)
self.check_pixel_value(overlay_id, 340, 145, [0.0, 0.0, 0.0, 0.0], eps=eps)
eps = 0.01
self.check_pixel_value(overlay_id, 200, 51, [8.305, 8.305, 8.305, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 65, [5.316, 5.316, 5.316, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 79, [3.0, 3.0, 3.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 93, [1.33, 1.33, 1.33, 1.0], eps=eps)
elif overlay == rd.DebugOverlay.TriangleSizePass:
eps = 1.0
self.check_pixel_value(overlay_id, 150, 90, [10632.0, 10632.0, 10632.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 130, [3324.0, 3324.0, 3324.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 160, [3324.0, 3324.0, 3324.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 150, 200, [10632.0, 10632.0, 10632.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 60, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 125, 250, [43072.0, 43072.0, 43072.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 60, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 250, [43072.0, 43072.0, 43072.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 175, [2128.0, 2128.0, 2128.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 250, 150, [10632.0, 10632.0, 10632.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 220, 190, [2128.0, 2128.0, 2128.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 285, 135, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 285, 165, [43072.0, 43072.0, 43072.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 330, 145, [531.0, 531.0, 531.0, 531.0], eps=eps)
self.check_pixel_value(overlay_id, 340, 145, [0.0, 0.0, 0.0, 0.0], eps=eps)
eps = 0.01
self.check_pixel_value(overlay_id, 200, 51, [8.305, 8.305, 8.305, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 65, [5.316, 5.316, 5.316, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 79, [3.0, 3.0, 3.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 93, [1.33, 1.33, 1.33, 1.0], eps=eps)
rdtest.log.success("Picked pixels are as expected for {}".format(str(overlay)))
if is_msaa:
rdtest.log.success("All MSAA overlays are as expected")
else:
rdtest.log.success("All normal overlays are as expected")
# Check the viewport overlay especially
view_marker: rd.DrawcallDescription = self.find_draw("Viewport Test")
self.controller.SetFrameEvent(view_marker.next.eventId, True)
pipe: rd.PipeState = self.controller.GetPipelineState()
col_tex: rd.ResourceId = pipe.GetOutputTargets()[0].resourceId
for overlay in rd.DebugOverlay:
if overlay == rd.DebugOverlay.NoOverlay:
continue
# These overlays are just displaymodes really, not actually separate overlays
if overlay == rd.DebugOverlay.NaN or overlay == rd.DebugOverlay.Clipping:
continue
# We'll test the clear-before-X overlays seperately, for both colour and depth
if overlay == rd.DebugOverlay.ClearBeforeDraw or overlay == rd.DebugOverlay.ClearBeforePass:
continue
rdtest.log.print("Checking overlay {} in viewport draw".format(str(overlay)))
tex.resourceId = col_tex
tex.overlay = overlay
out.SetTextureDisplay(tex)
out.Display()
eps = 1.0 / 256.0
overlay_id: rd.ResourceId = out.GetDebugOverlayTexID()
save_data = rd.TextureSave()
save_data.resourceId = overlay_id
save_data.destType = rd.FileType.PNG
self.controller.SaveTexture(save_data, rdtest.get_tmp_path('overlay.png'))
if overlay == rd.DebugOverlay.Drawcall:
# The drawcall overlay will show up outside the scissor region
self.check_pixel_value(overlay_id, 50, 85, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 50, 50, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 50, 10, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 85, 85, [0.8, 0.1, 0.8, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 50, 5, [0.0, 0.0, 0.0, 0.5], eps=eps)
self.check_pixel_value(overlay_id, 95, 85, [0.0, 0.0, 0.0, 0.5], eps=eps)
self.check_pixel_value(overlay_id, 80, 30, [0.0, 0.0, 0.0, 0.5], eps=eps)
elif overlay == rd.DebugOverlay.Wireframe:
# Wireframe we only test a limited set to avoid hitting implementation variations of line raster
# We also have to fudge a little because the lines might land on adjacent pixels
found = False
for delta in range(0, 5):
try:
self.check_pixel_value(overlay_id, 30 + delta, 32, [200.0 / 255.0, 1.0, 0.0, 1.0], eps=eps)
found = True
break
except rdtest.TestFailureException:
pass
if not found:
raise rdtest.TestFailureException("Couldn't find wireframe within scissor")
found = False
for delta in range(0, 5):
try:
self.check_pixel_value(overlay_id, 34 + delta, 22, [200.0 / 255.0, 1.0, 0.0, 1.0], eps=eps)
found = True
break
except rdtest.TestFailureException:
pass
if found:
raise rdtest.TestFailureException("Found wireframe outside of scissor")
elif overlay == rd.DebugOverlay.Depth or overlay == rd.DebugOverlay.Stencil or overlay == rd.DebugOverlay.BackfaceCull:
self.check_pixel_value(overlay_id, 50, 25, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 50, 75, [0.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 50, 20, [0.0, 1.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 50, 80, [0.0, 1.0, 0.0, 0.0], eps=eps)
elif overlay == rd.DebugOverlay.ViewportScissor:
# Inside viewport and scissor, passing triangle
self.check_pixel_value(overlay_id, 50, 50,
[0.2 * 0.4, 1.0 * 0.6 + 0.2 * 0.4, 0.9 * 0.4, 1.0 * 0.6 + 0.4 * 0.4], eps=eps)
# Inside viewport and outside scissor
self.check_pixel_value(overlay_id, 50, 80,
[1.0 * 0.6 + 0.2 * 0.4, 0.2 * 0.4, 0.9 * 0.4, 1.0 * 0.6 + 0.4 * 0.4], eps=eps)
elif overlay == rd.DebugOverlay.QuadOverdrawDraw:
self.check_pixel_value(overlay_id, 50, 50, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 50, 15, [0.0, 0.0, 0.0, 0.0], eps=eps)
elif overlay == rd.DebugOverlay.QuadOverdrawPass:
self.check_pixel_value(overlay_id, 50, 50, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 50, 15, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 270, [1.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 280, [0.0, 0.0, 0.0, 0.0], eps=eps)
elif overlay == rd.DebugOverlay.TriangleSizeDraw:
eps = 1.0
self.check_pixel_value(overlay_id, 50, 50, [5408.0, 5408.0, 5408.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 50, 15, [0.0, 0.0, 0.0, 0.0], eps=eps)
elif overlay == rd.DebugOverlay.TriangleSizePass:
eps = 1.0
self.check_pixel_value(overlay_id, 50, 50, [5408.0, 5408.0, 5408.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 50, 15, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 270, [43072.0, 43072.0, 43072.0, 1.0], eps=eps)
self.check_pixel_value(overlay_id, 200, 280, [0.0, 0.0, 0.0, 0.0], eps=eps)
rdtest.log.success("Picked pixels are as expected for {}".format(str(overlay)))
rdtest.log.success("Overlays are as expected around viewport/scissor behaviour")
test_marker: rd.DrawcallDescription = self.find_draw("Normal Test")
# Now check clear-before-X by hand, for colour and for depth
self.controller.SetFrameEvent(test_marker.next.eventId, True)
depth_tex: rd.ResourceId = pipe.GetDepthTarget().resourceId
eps = 1.0/256.0
# Check colour and depth before-hand
self.check_pixel_value(col_tex, 250, 250, [0.1, 0.1, 0.1, 1.0], eps=eps)
self.check_pixel_value(col_tex, 125, 125, [1.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(col_tex, 125, 175, [0.0, 0.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(col_tex, 50, 50, [0.2, 0.2, 0.2, 1.0], eps=eps)
self.check_pixel_value(col_tex, 291, 150, [0.977, 0.977, 0.977, 1.0], eps=0.075)
self.check_pixel_value(col_tex, 200, 51, [1.0, 0.5, 1.0, 1.0], eps=eps)
self.check_pixel_value(col_tex, 200, 65, [1.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(col_tex, 200, 79, [0.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(col_tex, 200, 93, [0.0, 1.0, 0.0, 1.0], eps=eps)
eps = 0.001
self.check_pixel_value(depth_tex, 160, 135, [0.9, 85.0/255.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(depth_tex, 160, 165, [0.0, 0.0/255.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(depth_tex, 250, 150, [0.5, 85.0/255.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(depth_tex, 250, 250, [0.95, 0.0/255.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(depth_tex, 50, 50, [1.0, 0.0/255.0, 0.0, 1.0], eps=eps)
rdtest.log.success("Colour and depth at end are correct")
# Check clear before pass
tex.resourceId = col_tex
tex.overlay = rd.DebugOverlay.ClearBeforePass
out.SetTextureDisplay(tex)
out.Display()
eps = 1.0/256.0
self.check_pixel_value(col_tex, 250, 250, [0.1, 0.1, 0.1, 1.0], eps=eps)
self.check_pixel_value(col_tex, 125, 125, [1.0, 0.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(col_tex, 125, 175, [0.0, 0.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(col_tex, 50, 50, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(col_tex, 291, 150, [0.977, 0.977, 0.977, 1.0], eps=0.075)
self.check_pixel_value(col_tex, 200, 51, [1.0, 0.5, 1.0, 1.0], eps=eps)
self.check_pixel_value(col_tex, 200, 65, [1.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(col_tex, 200, 79, [0.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(col_tex, 200, 93, [0.0, 1.0, 0.0, 1.0], eps=eps)
tex.resourceId = depth_tex
tex.overlay = rd.DebugOverlay.ClearBeforePass
out.SetTextureDisplay(tex)
out.Display()
eps = 0.001
self.check_pixel_value(depth_tex, 160, 135, [0.9, 85.0/255.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(depth_tex, 160, 165, [0.0, 0.0/255.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(depth_tex, 250, 150, [0.5, 85.0/255.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(depth_tex, 250, 250, [0.95, 0.0/255.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(depth_tex, 50, 50, [1.0, 0.0/255.0, 0.0, 1.0], eps=eps)
rdtest.log.success("Clear before pass colour and depth values as expected")
# Check clear before draw
tex.resourceId = col_tex
tex.overlay = rd.DebugOverlay.ClearBeforeDraw
out.SetTextureDisplay(tex)
out.Display()
eps = 1.0/256.0
# These are all pass triangles, should be cleared
self.check_pixel_value(col_tex, 250, 250, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(col_tex, 125, 125, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(col_tex, 125, 175, [0.0, 0.0, 0.0, 0.0], eps=eps)
self.check_pixel_value(col_tex, 50, 50, [0.0, 0.0, 0.0, 0.0], eps=eps)
# These should be identical
self.check_pixel_value(col_tex, 291, 150, [0.977, 0.977, 0.977, 1.0], eps=0.075)
self.check_pixel_value(col_tex, 200, 51, [1.0, 0.5, 1.0, 1.0], eps=eps)
self.check_pixel_value(col_tex, 200, 65, [1.0, 1.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(col_tex, 200, 79, [0.0, 1.0, 1.0, 1.0], eps=eps)
self.check_pixel_value(col_tex, 200, 93, [0.0, 1.0, 0.0, 1.0], eps=eps)
tex.resourceId = depth_tex
tex.overlay = rd.DebugOverlay.ClearBeforeDraw
out.SetTextureDisplay(tex)
out.Display()
eps = 0.001
# Without the pass, depth/stencil results are different
self.check_pixel_value(depth_tex, 160, 135, [0.5, 85.0/255.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(depth_tex, 160, 165, [0.5, 85.0/255.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(depth_tex, 250, 150, [0.5, 85.0/255.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(depth_tex, 250, 250, [1.0, 0.0/255.0, 0.0, 1.0], eps=eps)
self.check_pixel_value(depth_tex, 50, 50, [1.0, 0.0/255.0, 0.0, 1.0], eps=eps)
rdtest.log.success("Clear before draw colour and depth values as expected")
rdtest.log.success("All overlays as expected for main draw")
# Now test overlays on a render-to-slice/mip case
for mip in [2, 3]:
sub_marker: rd.DrawcallDescription = self.find_draw("Subresources mip {}".format(mip))
self.controller.SetFrameEvent(sub_marker.next.eventId, True)
pipe: rd.PipeState = self.controller.GetPipelineState()
col_tex = pipe.GetOutputTargets()[0].resourceId
sub = rd.Subresource(pipe.GetOutputTargets()[0].firstMip, pipe.GetOutputTargets()[0].firstSlice, 0)
for overlay in rd.DebugOverlay:
if overlay == rd.DebugOverlay.NoOverlay:
continue
# These overlays are just displaymodes really, not actually separate overlays
if overlay == rd.DebugOverlay.NaN or overlay == rd.DebugOverlay.Clipping:
continue
if overlay == rd.DebugOverlay.ClearBeforeDraw or overlay == rd.DebugOverlay.ClearBeforePass:
continue
rdtest.log.print("Checking overlay {} with mip/slice rendering".format(str(overlay)))
tex.resourceId = col_tex
tex.overlay = overlay
tex.subresource = sub
out.SetTextureDisplay(tex)
out.Display()
overlay_id: rd.ResourceId = out.GetDebugOverlayTexID()
shift = 0
if mip == 3:
shift = 1
# All values in mip 0 should be 0 for all overlays
self.check_pixel_value(overlay_id, 200 >> shift, 150 >> shift, [0.0, 0.0, 0.0, 0.0], sub=rd.Subresource(0, 0, 0))
self.check_pixel_value(overlay_id, 197 >> shift, 147 >> shift, [0.0, 0.0, 0.0, 0.0], sub=rd.Subresource(0, 0, 0))
self.check_pixel_value(overlay_id, 203 >> shift, 153 >> shift, [0.0, 0.0, 0.0, 0.0], sub=rd.Subresource(0, 0, 0))
# Also for array slice 0 on this mip
self.check_pixel_value(overlay_id, 200 >> shift, 150 >> shift, [0.0, 0.0, 0.0, 0.0], sub=rd.Subresource(mip, 0, 0))
self.check_pixel_value(overlay_id, 197 >> shift, 147 >> shift, [0.0, 0.0, 0.0, 0.0], sub=rd.Subresource(mip, 0, 0))
self.check_pixel_value(overlay_id, 203 >> shift, 153 >> shift, [0.0, 0.0, 0.0, 0.0], sub=rd.Subresource(mip, 0, 0))
rdtest.log.success("Other mips are empty as expected for overlay {}".format(str(overlay)))
if overlay == rd.DebugOverlay.Drawcall:
self.check_pixel_value(overlay_id, 50 >> shift, 36 >> shift, [0.8, 0.1, 0.8, 1.0], sub=sub, eps=eps)
self.check_pixel_value(overlay_id, 30 >> shift, 36 >> shift, [0.0, 0.0, 0.0, 0.5], sub=sub, eps=eps)
self.check_pixel_value(overlay_id, 70 >> shift, 34 >> shift, [0.8, 0.1, 0.8, 1.0], sub=sub, eps=eps)
self.check_pixel_value(overlay_id, 70 >> shift, 20 >> shift, [0.0, 0.0, 0.0, 0.5], sub=sub, eps=eps)
elif overlay == rd.DebugOverlay.Wireframe:
self.check_pixel_value(overlay_id, 36 >> shift, 36 >> shift, [200.0 / 255.0, 1.0, 0.0, 1.0],
sub=sub, eps=eps)
self.check_pixel_value(overlay_id, 36 >> shift, 50 >> shift, [200.0 / 255.0, 1.0, 0.0, 1.0],
sub=sub, eps=eps)
self.check_pixel_value(overlay_id, 50 >> shift, 36 >> shift, [200.0 / 255.0, 1.0, 0.0, 0.0],
sub=sub, eps=eps)
elif overlay == rd.DebugOverlay.Depth or overlay == rd.DebugOverlay.Stencil:
self.check_pixel_value(overlay_id, 50 >> shift, 36 >> shift, [0.0, 1.0, 0.0, 1.0], sub=sub)
self.check_pixel_value(overlay_id, 30 >> shift, 36 >> shift, [0.0, 1.0, 0.0, 0.0], sub=sub)
self.check_pixel_value(overlay_id, 70 >> shift, 34 >> shift, [1.0, 0.0, 0.0, 1.0], sub=sub)
self.check_pixel_value(overlay_id, 70 >> shift, 20 >> shift, [0.0, 1.0, 0.0, 0.0], sub=sub)
elif overlay == rd.DebugOverlay.BackfaceCull:
self.check_pixel_value(overlay_id, 50 >> shift, 36 >> shift, [0.0, 1.0, 0.0, 1.0], sub=sub)
self.check_pixel_value(overlay_id, 30 >> shift, 36 >> shift, [0.0, 1.0, 0.0, 0.0], sub=sub)
self.check_pixel_value(overlay_id, 70 >> shift, 34 >> shift, [1.0, 0.0, 0.0, 1.0], sub=sub)
self.check_pixel_value(overlay_id, 70 >> shift, 20 >> shift, [0.0, 1.0, 0.0, 0.0], sub=sub)
elif overlay == rd.DebugOverlay.ViewportScissor:
self.check_pixel_value(overlay_id, 20 >> shift, 15 >> shift,
[0.2 * 0.4, 0.2 * 0.4, 0.9 * 0.4, 0.4 * 0.4], sub=sub, eps=eps)
self.check_pixel_value(overlay_id, 80 >> shift, 15 >> shift,
[0.2 * 0.4, 0.2 * 0.4, 0.9 * 0.4, 0.4 * 0.4], sub=sub, eps=eps)
self.check_pixel_value(overlay_id, 20 >> shift, 60 >> shift,
[0.2 * 0.4, 0.2 * 0.4, 0.9 * 0.4, 0.4 * 0.4], sub=sub, eps=eps)
self.check_pixel_value(overlay_id, 80 >> shift, 60 >> shift,
[0.2 * 0.4, 0.2 * 0.4, 0.9 * 0.4, 0.4 * 0.4], sub=sub, eps=eps)
self.check_pixel_value(overlay_id, 50 >> shift, 36 >> shift,
[0.2 * 0.4, 1.0 * 0.6 + 0.2 * 0.4, 0.9 * 0.4, 1.0 * 0.6 + 0.4 * 0.4],
sub=sub, eps=eps)
if mip == 2:
self.check_pixel_value(overlay_id, 6, 6, [0.1, 0.1, 0.1, 1.0], sub=sub, eps=eps)
self.check_pixel_value(overlay_id, 4, 4, [0.0, 0.0, 0.0, 0.0], sub=sub)
self.check_pixel_value(overlay_id, 0, 0, [1.0, 1.0, 1.0, 1.0], sub=sub)
self.check_pixel_value(overlay_id, 20, 0, [0.0, 0.0, 0.0, 1.0], sub=sub)
self.check_pixel_value(overlay_id, 40, 0, [1.0, 1.0, 1.0, 1.0], sub=sub)
self.check_pixel_value(overlay_id, 60, 0, [0.0, 0.0, 0.0, 1.0], sub=sub)
else:
self.check_pixel_value(overlay_id, 4, 4, [0.1, 0.1, 0.1, 1.0], sub=sub, eps=eps)
self.check_pixel_value(overlay_id, 0, 0, [1.0, 1.0, 1.0, 1.0], sub=sub)
self.check_pixel_value(overlay_id, 20, 0, [0.0, 0.0, 0.0, 1.0], sub=sub)
self.check_pixel_value(overlay_id, 40, 0, [1.0, 1.0, 1.0, 1.0], sub=sub)
elif overlay == rd.DebugOverlay.QuadOverdrawDraw or overlay == rd.DebugOverlay.QuadOverdrawPass:
self.check_pixel_value(overlay_id, 50 >> shift, 36 >> shift, [1.0, 1.0, 1.0, 1.0], sub=sub)
self.check_pixel_value(overlay_id, 30 >> shift, 36 >> shift, [0.0, 0.0, 0.0, 0.0], sub=sub)
self.check_pixel_value(overlay_id, 70 >> shift, 20 >> shift, [0.0, 0.0, 0.0, 0.0], sub=sub)
self.check_pixel_value(overlay_id, 50 >> shift, 45 >> shift, [2.0, 2.0, 2.0, 2.0], sub=sub)
elif overlay == rd.DebugOverlay.TriangleSizeDraw or overlay == rd.DebugOverlay.TriangleSizePass:
if mip == 2:
self.check_pixel_value(overlay_id, 50 >> shift, 36 >> shift, [585.0, 585.0, 585.0, 1.0], sub=sub)
else:
self.check_pixel_value(overlay_id, 50 >> shift, 36 >> shift, [151.75, 151.75, 151.75, 1.0], sub=sub)
self.check_pixel_value(overlay_id, 30 >> shift, 36 >> shift, [0.0, 0.0, 0.0, 0.0], sub=sub)
self.check_pixel_value(overlay_id, 70 >> shift, 34 >> shift, [0.0, 0.0, 0.0, 0.0], sub=sub)
self.check_pixel_value(overlay_id, 70 >> shift, 20 >> shift, [0.0, 0.0, 0.0, 0.0], sub=sub)
if mip == 2:
self.check_pixel_value(overlay_id, 50 >> shift, 45 >> shift, [117.0, 117.0, 117.0, 1.0], sub=sub)
else:
self.check_pixel_value(overlay_id, 50 >> shift, 45 >> shift, [30.359375, 30.359375, 30.359375, 1.0], sub=sub)
rdtest.log.success("Picked values are correct for mip {} overlay {}".format(sub.mip, str(overlay)))
out.Shutdown()
