def ext2int(ppc, val_or_field=None, ordering=None, dim=0):
"""Converts external to internal indexing.
This function has two forms, the old form that operates on
and returns individual matrices and the new form that operates
on and returns an entire PYPOWER case dict.
1. C{ppc = ext2int(ppc)}
If the input is a single PYPOWER case dict, then all isolated
buses, off-line generators and branches are removed along with any
generators, branches or areas connected to isolated buses. Then the
buses are renumbered consecutively, beginning at 0, and the
generators are sorted by increasing bus number. Any 'ext2int'
callback routines registered in the case are also invoked
automatically. All of the related
indexing information and the original data matrices are stored under
the 'order' key of the dict to be used by C{int2ext} to perform
the reverse conversions. If the case is already using internal
numbering it is returned unchanged.
Example::
ppc = ext2int(ppc)
@see: L{int2ext}, L{e2i_field}, L{e2i_data}
@author: Ray Zimmerman (PSERC Cornell)
@author: Richard Lincoln
"""
ppc = deepcopy(ppc)
if val_or_field is None: # nargin == 1
first = 'order' not in ppc
if first or ppc["order"]["state"] == 'e':
## initialize order
if first:
o = {
'ext': {
'bus': None,
'branch': None,
'gen': None
},
'bus': { 'e2i': None,
'i2e': None,
'status': {} },
'gen': { 'e2i': None,
'i2e': None,
'status': {} },
'branch': { 'status': {} }
}
else:
o = ppc["order"]
## sizes
nb = ppc["bus"].shape[0]
ng = ppc["gen"].shape[0]
ng0 = ng
if 'A' in ppc:
dc = True if ppc["A"].shape[1] < (2 * nb + 2 * ng) else False
elif 'N' in ppc:
dc = True if ppc["N"].shape[1] < (2 * nb + 2 * ng) else False
else:
dc = False
## save data matrices with external ordering
if 'ext' not in o: o['ext'] = {}
o["ext"]["bus"] = ppc["bus"].copy()
o["ext"]["branch"] = ppc["branch"].copy()
o["ext"]["gen"] = ppc["gen"].copy()
if 'areas' in ppc:
if len(ppc["areas"]) == 0: ## if areas field is empty
del ppc['areas'] ## delete it (so it's ignored)
else: ## otherwise
o["ext"]["areas"] = ppc["areas"].copy() ## save it
## check that all buses have a valid BUS_TYPE
bt = ppc["bus"][:, BUS_TYPE]
err = find(~((bt == PQ) | (bt == PV) | (bt == REF) | (bt == NONE)))
if len(err) > 0:
sys.stderr.write('ext2int: bus %d has an invalid BUS_TYPE\n' % err)
## determine which buses, branches, gens are connected and
## in-service
n2i = sparse((range(nb), (ppc["bus"][:, BUS_I], zeros(nb))),
shape=(max(ppc["bus"][:, BUS_I]) + 1, 1))
n2i = array( n2i.todense().flatten() )[0, :] # as 1D array
bs = (bt != NONE) ## bus status
o["bus"]["status"]["on"] = find( bs ) ## connected
o["bus"]["status"]["off"] = find( ~bs ) ## isolated
gs = ( (ppc["gen"][:, GEN_STATUS] > 0) & ## gen status
bs[ n2i[ppc["gen"][:, GEN_BUS].astype(int)] ] )
o["gen"]["status"]["on"] = find( gs ) ## on and connected
o["gen"]["status"]["off"] = find( ~gs ) ## off or isolated
brs = ( ppc["branch"][:, BR_STATUS].astype(int) & ## branch status
bs[n2i[ppc["branch"][:, F_BUS].astype(int)]] &
bs[n2i[ppc["branch"][:, T_BUS].astype(int)]] ).astype(bool)
o["branch"]["status"]["on"] = find( brs ) ## on and conn
o["branch"]["status"]["off"] = find( ~brs )
if 'areas' in ppc:
ar = bs[ n2i[ppc["areas"][:, PRICE_REF_BUS].astype(int)] ]
o["areas"] = {"status": {}}
o["areas"]["status"]["on"] = find( ar )
o["areas"]["status"]["off"] = find( ~ar )
## delete stuff that is "out"
if len(o["bus"]["status"]["off"]) > 0:
# ppc["bus"][o["bus"]["status"]["off"], :] = array([])
ppc["bus"] = ppc["bus"][o["bus"]["status"]["on"], :]
if len(o["branch"]["status"]["off"]) > 0:
# ppc["branch"][o["branch"]["status"]["off"], :] = array([])
ppc["branch"] = ppc["branch"][o["branch"]["status"]["on"], :]
if len(o["gen"]["status"]["off"]) > 0:
# ppc["gen"][o["gen"]["status"]["off"], :] = array([])
ppc["gen"] = ppc["gen"][o["gen"]["status"]["on"], :]
if 'areas' in ppc and (len(o["areas"]["status"]["off"]) > 0):
# ppc["areas"][o["areas"]["status"]["off"], :] = array([])
ppc["areas"] = ppc["areas"][o["areas"]["status"]["on"], :]
## update size
nb = ppc["bus"].shape[0]
## apply consecutive bus numbering
o["bus"]["i2e"] = ppc["bus"][:, BUS_I].copy()
o["bus"]["e2i"] = zeros(max(o["bus"]["i2e"]) + 1)
o["bus"]["e2i"][o["bus"]["i2e"].astype(int)] = arange(nb)
ppc["bus"][:, BUS_I] = \
o["bus"]["e2i"][ ppc["bus"][:, BUS_I].astype(int) ].copy()
ppc["gen"][:, GEN_BUS] = \
o["bus"]["e2i"][ ppc["gen"][:, GEN_BUS].astype(int) ].copy()
ppc["branch"][:, F_BUS] = \
o["bus"]["e2i"][ ppc["branch"][:, F_BUS].astype(int) ].copy()
ppc["branch"][:, T_BUS] = \
o["bus"]["e2i"][ ppc["branch"][:, T_BUS].astype(int) ].copy()
if 'areas' in ppc:
ppc["areas"][:, PRICE_REF_BUS] = \
o["bus"]["e2i"][ ppc["areas"][:,
PRICE_REF_BUS].astype(int) ].copy()
## reorder gens in order of increasing bus number
o["gen"]["e2i"] = argsort(ppc["gen"][:, GEN_BUS])
o["gen"]["i2e"] = argsort(o["gen"]["e2i"])
ppc["gen"] = ppc["gen"][o["gen"]["e2i"].astype(int), :]
if 'int' in o:
del o['int']
o["state"] = 'i'
ppc["order"] = o
## update gencost, A and N
if 'gencost' in ppc:
ordering = ['gen'] ## Pg cost only
if ppc["gencost"].shape[0] == (2 * ng0):
ordering.append('gen') ## include Qg cost
ppc = e2i_field(ppc, 'gencost', ordering)
if 'A' in ppc or 'N' in ppc:
if dc:
ordering = ['bus', 'gen']
else:
ordering = ['bus', 'bus', 'gen', 'gen']
if 'A' in ppc:
ppc = e2i_field(ppc, 'A', ordering, 1)
if 'N' in ppc:
ppc = e2i_field(ppc, 'N', ordering, 1)
## execute userfcn callbacks for 'ext2int' stage
if 'userfcn' in ppc:
ppc = run_userfcn(ppc['userfcn'], 'ext2int', ppc)
else: ## convert extra data
if isinstance(val_or_field, str) or isinstance(val_or_field, list):
## field
warn('Calls of the form ppc = ext2int(ppc, '
'\'field_name\', ...) have been deprecated. Please '
'replace ext2int with e2i_field.', DeprecationWarning)
gen, branch = val_or_field, ordering
ppc = e2i_field(ppc, gen, branch, dim)
else:
## value
warn('Calls of the form val = ext2int(ppc, val, ...) have been '
'deprecated. Please replace ext2int with e2i_data.',
DeprecationWarning)
gen, branch = val_or_field, ordering
ppc = e2i_data(ppc, gen, branch, dim)
return ppc
def savecase(fname, ppc, comment=None, version='2'):
"""Saves a PYPOWER case file, given a filename and the data.
Writes a PYPOWER case file, given a filename and data dict. The C{fname}
parameter is the name of the file to be created or overwritten. Returns
the filename, with extension added if necessary. The optional C{comment}
argument is either string (single line comment) or a list of strings which
are inserted as comments. When using a PYPOWER case dict, if the
optional C{version} argument is '1' it will modify the data matrices to
version 1 format before saving.
@author: Carlos E. Murillo-Sanchez (PSERC Cornell & Universidad
Autonoma de Manizales)
@author: Ray Zimmerman (PSERC Cornell)
@author: Richard Lincoln
"""
ppc_ver = ppc["version"] = version
baseMVA, bus, gen, branch = \
ppc["baseMVA"], ppc["bus"], ppc["gen"], ppc["branch"]
areas = ppc["areas"] if "areas" in ppc else None
gencost = ppc["gencost"] if "gencost" in ppc else None
## modifications for version 1 format
if ppc_ver == "1":
raise NotImplementedError
# ## remove extra columns of gen
# if gen.shape[1] >= MU_QMIN:
# gen = c_[gen[:, :PMIN], gen[:, MU_PMAX:MU_QMIN]]
# else:
# gen = gen[:, :PMIN]
# ## use the version 1 values for column names
# shift = MU_PMAX - PMIN - 1
# tmp = array([MU_PMAX, MU_PMIN, MU_QMAX, MU_QMIN]) - shift
# MU_PMAX, MU_PMIN, MU_QMAX, MU_QMIN = tmp
#
# ## remove extra columns of branch
# if branch.shape[1] >= MU_ST:
# branch = c_[branch[:, :BR_STATUS], branch[:, PF:MU_ST]]
# elif branch.shape[1] >= QT:
# branch = c_[branch[:, :BR_STATUS], branch[:, PF:QT]]
# else:
# branch = branch[:, :BR_STATUS]
# ## use the version 1 values for column names
# shift = PF - BR_STATUS - 1
# tmp = array([PF, QF, PT, QT, MU_SF, MU_ST]) - shift
# PF, QF, PT, QT, MU_SF, MU_ST = tmp
## verify valid filename
l = len(fname)
rootname = ""
if l > 2:
if fname[-3:] == ".py":
rootname = fname[:-3]
extension = ".py"
elif l > 4:
if fname[-4:] == ".mat":
rootname = fname[:-4]
extension = ".mat"
if not rootname:
rootname = fname
extension = ".py"
fname = rootname + extension
indent = ' ' # four spaces
indent2 = indent + indent
## open and write the file
if extension == ".mat": ## MAT-file
savemat(fname, ppc)
else: ## Python file
try:
fd = open(fname, "wb")
except Exception, detail:
stderr.write("savecase: %s.\n" % detail)
return fname
## function header, etc.
if ppc_ver == "1":
raise NotImplementedError
# if (areas != None) and (gencost != None) and (len(gencost) > 0):
# fd.write('function [baseMVA, bus, gen, branch, areas, gencost] = %s\n' % rootname)
# else:
# fd.write('function [baseMVA, bus, gen, branch] = %s\n' % rootname)
# prefix = ''
else:
fd.write('def %s():\n' % basename(rootname))
prefix = 'ppc'
if comment:
if isinstance(comment, basestring):
fd.write('#%s\n' % comment)
elif isinstance(comment, list):
for c in comment:
fd.write('#%s\n' % c)
fd.write('\n%s## PYPOWER Case Format : Version %s\n' % (indent, ppc_ver))
if ppc_ver != "1":
fd.write("%sppc = {'version': '%s'}\n" % (indent, ppc_ver))
fd.write('\n%s##----- Power Flow Data -----##\n' % indent)
fd.write('%s## system MVA base\n' % indent)
fd.write("%s%s['baseMVA'] = %.9g\n" % (indent, prefix, baseMVA))
## bus data
ncols = bus.shape[1]
fd.write('\n%s## bus data\n' % indent)
fd.write('%s# bus_i type Pd Qd Gs Bs area Vm Va baseKV zone Vmax Vmin' % indent)
if ncols >= MU_VMIN + 1: ## opf SOLVED, save with lambda's & mu's
fd.write('lam_P lam_Q mu_Vmax mu_Vmin')
fd.write("\n%s%s['bus'] = array([\n" % (indent, prefix))
if ncols < MU_VMIN + 1: ## opf NOT SOLVED, save without lambda's & mu's
for i in range(bus.shape[0]):
fd.write('%s[%d, %d, %.9g, %.9g, %.9g, %.9g, %d, %.9g, %.9g, %.9g, %d, %.9g, %.9g],\n' % ((indent2,) + tuple(bus[i, :VMIN + 1])))
else: ## opf SOLVED, save with lambda's & mu's
for i in range(bus.shape[0]):
fd.write('%s[%d, %d, %.9g, %.9g, %.9g, %.9g, %d, %.9g, %.9g, %.9g, %d, %.9g, %.9g, %.4f, %.4f, %.4f, %.4f],\n' % ((indent2,) + tuple(bus[:, :MU_VMIN + 1])))
fd.write('%s])\n' % indent)
## generator data
ncols = gen.shape[1]
fd.write('\n%s## generator data\n' % indent)
fd.write('%s# bus Pg Qg Qmax Qmin Vg mBase status Pmax Pmin' % indent)
if ppc_ver != "1":
fd.write(' Pc1 Pc2 Qc1min Qc1max Qc2min Qc2max ramp_agc ramp_10 ramp_30 ramp_q apf')
if ncols >= MU_QMIN + 1: # opf SOLVED, save with mu's
fd.write(' mu_Pmax mu_Pmin mu_Qmax mu_Qmin')
fd.write("\n%s%s['gen'] = array([\n" % (indent, prefix))
if ncols < MU_QMIN + 1: ## opf NOT SOLVED, save without mu's
if ppc_ver == "1":
for i in range(gen.shape[0]):
fd.write('%s[%d, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %d, %.9g, %.9g],\n' % ((indent2,) + tuple(gen[i, :PMIN + 1])))
else:
for i in range(gen.shape[0]):
fd.write('%s[%d, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %d, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g],\n' % ((indent2,) + tuple(gen[i, :APF + 1])))
else:
if ppc_ver == "1":
for i in range(gen.shape[0]):
fd.write('%s[%d, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %d, %.9g, %.9g, %.4f, %.4f, %.4f, %.4f],\n' % ((indent2,) + tuple(gen[i, :MU_QMIN + 1])))
else:
for i in range(gen.shape[0]):
fd.write('%s[%d, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %d, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.4f, %.4f, %.4f, %.4f],\n' % ((indent2,) + tuple(gen[i, :MU_QMIN + 1])))
fd.write('%s])\n' % indent)
## branch data
ncols = branch.shape[1]
fd.write('\n%s## branch data\n' % indent)
fd.write('%s# fbus tbus r x b rateA rateB rateC ratio angle status' % indent)
if ppc_ver != "1":
fd.write(' angmin angmax')
if ncols >= QT + 1: ## power flow SOLVED, save with line flows
fd.write(' Pf Qf Pt Qt')
if ncols >= MU_ST + 1: ## opf SOLVED, save with mu's
fd.write(' mu_Sf mu_St')
if ppc_ver != "1":
fd.write(' mu_angmin mu_angmax')
fd.write('\n%s%s[\'branch\'] = array([\n' % (indent, prefix))
if ncols < QT + 1: ## power flow NOT SOLVED, save without line flows or mu's
if ppc_ver == "1":
for i in range(branch.shape[0]):
fd.write('%s[%d, %d, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %d],\n' % ((indent2,) + tuple(branch[i, :BR_STATUS + 1])))
else:
for i in range(branch.shape[0]):
fd.write('%s[%d, %d, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %d, %.9g, %.9g],\n' % ((indent2,) + tuple(branch[i, :ANGMAX + 1])))
elif ncols < MU_ST + 1: ## power flow SOLVED, save with line flows but without mu's
if ppc_ver == "1":
for i in range(branch.shape[0]):
fd.write('%s[%d, %d, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %d, %.4f, %.4f, %.4f, %.4f],\n' % ((indent2,) + tuple(branch[i, :QT + 1])))
else:
for i in range(branch.shape[0]):
fd.write('%s[%d, %d, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %d, %.9g, %.9g, %.4f, %.4f, %.4f, %.4f],\n' % ((indent2,) + tuple(branch[i, :QT + 1])))
else: ## opf SOLVED, save with lineflows & mu's
if ppc_ver == "1":
for i in range(branch.shape[0]):
fd.write('%s[%d, %d, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %d, %.4f, %.4f, %.4f, %.4f, %.4f, %.4f],\n' % ((indent2,) + tuple(branch[i, :MU_ST + 1])))
else:
for i in range(branch.shape[0]):
fd.write('%s[%d, %d, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %.9g, %d, %.9g, %.9g, %.4f, %.4f, %.4f, %.4f, %.4f, %.4f, %.4f, %.4f],\n' % ((indent2,) + tuple(branch[i, :MU_ANGMAX + 1])))
fd.write('%s])\n' % indent)
## OPF data
if (areas != None) and (len(areas) > 0) or (gencost != None) and (len(gencost) > 0):
fd.write('\n%s##----- OPF Data -----##' % indent)
if (areas != None) and (len(areas) > 0):
## area data
fd.write('\n%s## area data\n' % indent)
fd.write('%s# area refbus\n' % indent)
fd.write("%s%s['areas'] = array([\n" % (indent, prefix))
if len(areas) > 0:
for i in range(areas.shape[0]):
fd.write('%s[%d, %d],\n' % ((indent2,) + tuple(areas[i, :PRICE_REF_BUS + 1])))
fd.write('%s])\n' % indent)
if gencost != None and len(gencost) > 0:
## generator cost data
fd.write('\n%s## generator cost data\n' % indent)
fd.write('%s# 1 startup shutdown n x1 y1 ... xn yn\n' % indent)
fd.write('%s# 2 startup shutdown n c(n-1) ... c0\n' % indent)
fd.write('%s%s[\'gencost\'] = array([\n' % (indent, prefix))
if len(gencost > 0):
if any(gencost[:, MODEL] == PW_LINEAR):
n1 = 2 * max(gencost[gencost[:, MODEL] == PW_LINEAR, NCOST])
else:
n1 = 0
if any(gencost[:, MODEL] == POLYNOMIAL):
n2 = max(gencost[gencost[:, MODEL] == POLYNOMIAL, NCOST])
else:
n2 = 0
n = int( max([n1, n2]) )
if gencost.shape[1] < n + 4:
stderr.write('savecase: gencost data claims it has more columns than it does\n')
template = '%s[%d, %.9g, %.9g, %d'
for i in range(n):
template = template + ', %.9g'
template = template + '],\n'
for i in range(gencost.shape[0]):
fd.write(template % ((indent2,) + tuple(gencost[i])))
fd.write('%s])\n' % indent)
## generalized OPF user data
if ("A" in ppc) and (len(ppc["A"]) > 0) or ("N" in ppc) and (len(ppc["N"]) > 0):
fd.write('\n%s##----- Generalized OPF User Data -----##' % indent)
## user constraints
if ("A" in ppc) and (len(ppc["A"]) > 0):
## A
fd.write('\n%s## user constraints\n' % indent)
print_sparse(fd, prefix + "['A']", ppc["A"])
if ("l" in ppc) and (len(ppc["l"]) > 0) and ("u" in ppc) and (len(ppc["u"]) > 0):
fd.write('%slu = array([\n' % indent)
for i in range(len(l)):
fd.write('%s[%.9g, %.9g],\n' % (indent2, ppc["l"][i], ppc["u"][i]))
fd.write('%s])\n' % indent)
fd.write("%s%s['l'] = lu[:, 0]\n" % (indent, prefix))
fd.write("%s%s['u'] = lu[:, 1]\n\n" % (indent, prefix))
elif ("l" in ppc) and (len(ppc["l"]) > 0):
fd.write("%s%s['l'] = array([\n" % (indent, prefix))
for i in range(len(l)):
fd.write('%s[%.9g],\n' % (indent2, ppc["l"][i]))
fd.write('%s])\n\n' % indent)
elif ("u" in ppc) and (len(ppc["u"]) > 0):
fd.write("%s%s['u'] = array([\n" % (indent, prefix))
for i in range(len(l)):
fd.write('%s[%.9g],\n' % (indent2, ppc["u"][i]))
fd.write('%s])\n\n' % indent)
## user costs
if ("N" in ppc) and (len(ppc["N"]) > 0):
fd.write('\n%s## user costs\n' % indent)
print_sparse(fd, prefix + "['N']", ppc["N"])
if ("H" in ppc) and (len(ppc["H"]) > 0):
print_sparse(fd, prefix + "['H']", ppc["H"])
if ("fparm" in ppc) and (len(ppc["fparm"]) > 0):
fd.write("%sCw_fparm = array([\n" % indent)
for i in range(ppc["Cw"]):
fd.write('%s[%.9g, %d, %.9g, %.9g, %.9g],\n' % ((indent2,) + tuple(ppc["Cw"][i]) + tuple(ppc["fparm"][i, :])))
fd.write('%s])\n' % indent)
fd.write('%s%s[\'Cw\'] = Cw_fparm[:, 0]\n' % (indent, prefix))
fd.write("%s%s['fparm'] = Cw_fparm[:, 1:5]\n" % (indent, prefix))
else:
fd.write("%s%s['Cw'] = array([\n" % (indent, prefix))
for i in range(len(ppc["Cw"])):
fd.write('%s[%.9g],\n' % (indent2, ppc["Cw"][i]))
fd.write('%s])\n' % indent)
## user vars
if ('z0' in ppc) or ('zl' in ppc) or ('zu' in ppc):
fd.write('\n%s## user vars\n' % indent)
if ('z0' in ppc) and (len(ppc['z0']) > 0):
fd.write('%s%s["z0"] = array([\n' % (indent, prefix))
for i in range(len(ppc['z0'])):
fd.write('%s[%.9g],\n' % (indent2, ppc["z0"]))
fd.write('%s])\n' % indent)
if ('zl' in ppc) and (len(ppc['zl']) > 0):
fd.write('%s%s["zl"] = array([\n' % (indent2, prefix))
for i in range(len(ppc['zl'])):
fd.write('%s[%.9g],\n' % (indent2, ppc["zl"]))
fd.write('%s])\n' % indent)
if ('zu' in ppc) and (len(ppc['zu']) > 0):
fd.write('%s%s["zu"] = array([\n' % (indent, prefix))
for i in range(len(ppc['zu'])):
fd.write('%s[%.9g],\n' % (indent2, ppc["zu"]))
fd.write('%s])\n' % indent)
## execute userfcn callbacks for 'savecase' stage
if 'userfcn' in ppc:
run_userfcn(ppc["userfcn"], 'savecase', ppc, fd, prefix)
fd.write('\n%sreturn ppc\n' % indent)
## close file
fd.close()
def printpf(baseMVA, bus=None, gen=None, branch=None, f=None, success=None,
et=None, fd=None, ppopt=None):
"""Prints power flow results.
Prints power flow and optimal power flow results to C{fd} (a file
descriptor which defaults to C{stdout}), with the details of what
gets printed controlled by the optional C{ppopt} argument, which is a
PYPOWER options vector (see L{ppoption} for details).
The data can either be supplied in a single C{results} dict, or
in the individual arguments: C{baseMVA}, C{bus}, C{gen}, C{branch}, C{f},
C{success} and C{et}, where C{f} is the OPF objective function value,
C{success} is C{True} if the solution converged and C{False} otherwise,
and C{et} is the elapsed time for the computation in seconds. If C{f} is
given, it is assumed that the output is from an OPF run, otherwise it is
assumed to be a simple power flow run.
Examples::
ppopt = ppoptions(OUT_GEN=1, OUT_BUS=0, OUT_BRANCH=0)
fd = open(fname, 'w+b')
results = runopf(ppc)
printpf(results)
printpf(results, fd)
printpf(results, fd, ppopt)
printpf(baseMVA, bus, gen, branch, f, success, et)
printpf(baseMVA, bus, gen, branch, f, success, et, fd)
printpf(baseMVA, bus, gen, branch, f, success, et, fd, ppopt)
fd.close()
@author: Ray Zimmerman (PSERC Cornell)
@author: Richard Lincoln
"""
##----- initialization -----
## default arguments
if isinstance(baseMVA, dict):
have_results_struct = 1
results = baseMVA
if gen is None:
ppopt = ppoption() ## use default options
else:
ppopt = gen
if (ppopt['OUT_ALL'] == 0):
return ## nothin' to see here, bail out now
if bus is None:
fd = stdout ## print to stdout by default
else:
fd = bus
baseMVA, bus, gen, branch, success, et = \
results["baseMVA"], results["bus"], results["gen"], \
results["branch"], results["success"], results["et"]
if 'f' in results:
f = results["f"]
else:
f = None
else:
have_results_struct = 0
if ppopt is None:
ppopt = ppoption() ## use default options
if fd is None:
fd = stdout ## print to stdout by default
if ppopt['OUT_ALL'] == 0:
return ## nothin' to see here, bail out now
isOPF = f is not None ## FALSE -> only simple PF data, TRUE -> OPF data
## options
isDC = ppopt['PF_DC'] ## use DC formulation?
OUT_ALL = ppopt['OUT_ALL']
OUT_ANY = OUT_ALL == 1 ## set to true if any pretty output is to be generated
OUT_SYS_SUM = (OUT_ALL == 1) or ((OUT_ALL == -1) and ppopt['OUT_SYS_SUM'])
OUT_AREA_SUM = (OUT_ALL == 1) or ((OUT_ALL == -1) and ppopt['OUT_AREA_SUM'])
OUT_BUS = (OUT_ALL == 1) or ((OUT_ALL == -1) and ppopt['OUT_BUS'])
OUT_BRANCH = (OUT_ALL == 1) or ((OUT_ALL == -1) and ppopt['OUT_BRANCH'])
OUT_GEN = (OUT_ALL == 1) or ((OUT_ALL == -1) and ppopt['OUT_GEN'])
OUT_ANY = OUT_ANY | ((OUT_ALL == -1) and
(OUT_SYS_SUM or OUT_AREA_SUM or OUT_BUS or
OUT_BRANCH or OUT_GEN))
if OUT_ALL == -1:
OUT_ALL_LIM = ppopt['OUT_ALL_LIM']
elif OUT_ALL == 1:
OUT_ALL_LIM = 2
else:
OUT_ALL_LIM = 0
OUT_ANY = OUT_ANY or (OUT_ALL_LIM >= 1)
if OUT_ALL_LIM == -1:
OUT_V_LIM = ppopt['OUT_V_LIM']
OUT_LINE_LIM = ppopt['OUT_LINE_LIM']
OUT_PG_LIM = ppopt['OUT_PG_LIM']
OUT_QG_LIM = ppopt['OUT_QG_LIM']
else:
OUT_V_LIM = OUT_ALL_LIM
OUT_LINE_LIM = OUT_ALL_LIM
OUT_PG_LIM = OUT_ALL_LIM
OUT_QG_LIM = OUT_ALL_LIM
OUT_ANY = OUT_ANY or ((OUT_ALL_LIM == -1) and (OUT_V_LIM or OUT_LINE_LIM or OUT_PG_LIM or OUT_QG_LIM))
ptol = 1e-4 ## tolerance for displaying shadow prices
## create map of external bus numbers to bus indices
i2e = bus[:, BUS_I].astype(int)
e2i = zeros(max(i2e) + 1, int)
e2i[i2e] = arange(bus.shape[0])
## sizes of things
nb = bus.shape[0] ## number of buses
nl = branch.shape[0] ## number of branches
ng = gen.shape[0] ## number of generators
## zero out some data to make printout consistent for DC case
if isDC:
bus[:, r_[QD, BS]] = zeros((nb, 2))
gen[:, r_[QG, QMAX, QMIN]] = zeros((ng, 3))
branch[:, r_[BR_R, BR_B]] = zeros((nl, 2))
## parameters
ties = find(bus[e2i[branch[:, F_BUS].astype(int)], BUS_AREA] !=
bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA])
## area inter-ties
tap = ones(nl) ## default tap ratio = 1 for lines
xfmr = find(branch[:, TAP]) ## indices of transformers
tap[xfmr] = branch[xfmr, TAP] ## include transformer tap ratios
tap = tap * exp(1j * pi / 180 * branch[:, SHIFT]) ## add phase shifters
nzld = find((bus[:, PD] != 0.0) | (bus[:, QD] != 0.0))
sorted_areas = sort(bus[:, BUS_AREA])
## area numbers
s_areas = sorted_areas[r_[1, find(diff(sorted_areas)) + 1]]
nzsh = find((bus[:, GS] != 0.0) | (bus[:, BS] != 0.0))
allg = find( ~isload(gen) )
ong = find( (gen[:, GEN_STATUS] > 0) & ~isload(gen) )
onld = find( (gen[:, GEN_STATUS] > 0) & isload(gen) )
V = bus[:, VM] * exp(-1j * pi / 180 * bus[:, VA])
out = find(branch[:, BR_STATUS] == 0) ## out-of-service branches
nout = len(out)
if isDC:
loss = zeros(nl)
else:
loss = baseMVA * abs(V[e2i[ branch[:, F_BUS].astype(int) ]] / tap -
V[e2i[ branch[:, T_BUS].astype(int) ]])**2 / \
(branch[:, BR_R] - 1j * branch[:, BR_X])
fchg = abs(V[e2i[ branch[:, F_BUS].astype(int) ]] / tap)**2 * branch[:, BR_B] * baseMVA / 2
tchg = abs(V[e2i[ branch[:, T_BUS].astype(int) ]] )**2 * branch[:, BR_B] * baseMVA / 2
loss[out] = zeros(nout)
fchg[out] = zeros(nout)
tchg[out] = zeros(nout)
##----- print the stuff -----
if OUT_ANY:
## convergence & elapsed time
if success:
fd.write('\nConverged in %.2f seconds' % et)
else:
fd.write('\nDid not converge (%.2f seconds)\n' % et)
## objective function value
if isOPF:
fd.write('\nObjective Function Value = %.2f $/hr' % f)
if OUT_SYS_SUM:
fd.write('\n================================================================================')
fd.write('\n| System Summary |')
fd.write('\n================================================================================')
fd.write('\n\nHow many? How much? P (MW) Q (MVAr)')
fd.write('\n--------------------- ------------------- ------------- -----------------')
fd.write('\nBuses %6d Total Gen Capacity %7.1f %7.1f to %.1f' % (nb, sum(gen[allg, PMAX]), sum(gen[allg, QMIN]), sum(gen[allg, QMAX])))
fd.write('\nGenerators %5d On-line Capacity %7.1f %7.1f to %.1f' % (len(allg), sum(gen[ong, PMAX]), sum(gen[ong, QMIN]), sum(gen[ong, QMAX])))
fd.write('\nCommitted Gens %5d Generation (actual) %7.1f %7.1f' % (len(ong), sum(gen[ong, PG]), sum(gen[ong, QG])))
fd.write('\nLoads %5d Load %7.1f %7.1f' % (len(nzld)+len(onld), sum(bus[nzld, PD])-sum(gen[onld, PG]), sum(bus[nzld, QD])-sum(gen[onld, QG])))
fd.write('\n Fixed %5d Fixed %7.1f %7.1f' % (len(nzld), sum(bus[nzld, PD]), sum(bus[nzld, QD])))
fd.write('\n Dispatchable %5d Dispatchable %7.1f of %-7.1f%7.1f' % (len(onld), -sum(gen[onld, PG]), -sum(gen[onld, PMIN]), -sum(gen[onld, QG])))
fd.write('\nShunts %5d Shunt (inj) %7.1f %7.1f' % (len(nzsh),
-sum(bus[nzsh, VM]**2 * bus[nzsh, GS]), sum(bus[nzsh, VM]**2 * bus[nzsh, BS]) ))
fd.write('\nBranches %5d Losses (I^2 * Z) %8.2f %8.2f' % (nl, sum(loss.real), sum(loss.imag) ))
fd.write('\nTransformers %5d Branch Charging (inj) - %7.1f' % (len(xfmr), sum(fchg) + sum(tchg) ))
fd.write('\nInter-ties %5d Total Inter-tie Flow %7.1f %7.1f' % (len(ties), sum(abs(branch[ties, PF]-branch[ties, PT])) / 2, sum(abs(branch[ties, QF]-branch[ties, QT])) / 2))
fd.write('\nAreas %5d' % len(s_areas))
fd.write('\n')
fd.write('\n Minimum Maximum')
fd.write('\n ------------------------- --------------------------------')
minv = min(bus[:, VM])
mini = argmin(bus[:, VM])
maxv = max(bus[:, VM])
maxi = argmax(bus[:, VM])
fd.write('\nVoltage Magnitude %7.3f p.u. @ bus %-4d %7.3f p.u. @ bus %-4d' % (minv, bus[mini, BUS_I], maxv, bus[maxi, BUS_I]))
minv = min(bus[:, VA])
mini = argmin(bus[:, VA])
maxv = max(bus[:, VA])
maxi = argmax(bus[:, VA])
fd.write('\nVoltage Angle %8.2f deg @ bus %-4d %8.2f deg @ bus %-4d' % (minv, bus[mini, BUS_I], maxv, bus[maxi, BUS_I]))
if not isDC:
maxv = max(loss.real)
maxi = argmax(loss.real)
fd.write('\nP Losses (I^2*R) - %8.2f MW @ line %d-%d' % (maxv, branch[maxi, F_BUS], branch[maxi, T_BUS]))
maxv = max(loss.imag)
maxi = argmax(loss.imag)
fd.write('\nQ Losses (I^2*X) - %8.2f MVAr @ line %d-%d' % (maxv, branch[maxi, F_BUS], branch[maxi, T_BUS]))
if isOPF:
minv = min(bus[:, LAM_P])
mini = argmin(bus[:, LAM_P])
maxv = max(bus[:, LAM_P])
maxi = argmax(bus[:, LAM_P])
fd.write('\nLambda P %8.2f $/MWh @ bus %-4d %8.2f $/MWh @ bus %-4d' % (minv, bus[mini, BUS_I], maxv, bus[maxi, BUS_I]))
minv = min(bus[:, LAM_Q])
mini = argmin(bus[:, LAM_Q])
maxv = max(bus[:, LAM_Q])
maxi = argmax(bus[:, LAM_Q])
fd.write('\nLambda Q %8.2f $/MWh @ bus %-4d %8.2f $/MWh @ bus %-4d' % (minv, bus[mini, BUS_I], maxv, bus[maxi, BUS_I]))
fd.write('\n')
if OUT_AREA_SUM:
fd.write('\n================================================================================')
fd.write('\n| Area Summary |')
fd.write('\n================================================================================')
fd.write('\nArea # of # of Gens # of Loads # of # of # of # of')
fd.write('\n Num Buses Total Online Total Fixed Disp Shunt Brchs Xfmrs Ties')
fd.write('\n---- ----- ----- ------ ----- ----- ----- ----- ----- ----- -----')
for i in range(len(s_areas)):
a = s_areas[i]
ib = find(bus[:, BUS_AREA] == a)
ig = find((bus[e2i[gen[:, GEN_BUS].astype(int)], BUS_AREA] == a) & ~isload(gen))
igon = find((bus[e2i[gen[:, GEN_BUS].astype(int)], BUS_AREA] == a) & (gen[:, GEN_STATUS] > 0) & ~isload(gen))
ildon = find((bus[e2i[gen[:, GEN_BUS].astype(int)], BUS_AREA] == a) & (gen[:, GEN_STATUS] > 0) & isload(gen))
inzld = find((bus[:, BUS_AREA] == a) & logical_or(bus[:, PD], bus[:, QD]))
inzsh = find((bus[:, BUS_AREA] == a) & logical_or(bus[:, GS], bus[:, BS]))
ibrch = find((bus[e2i[branch[:, F_BUS].astype(int)], BUS_AREA] == a) & (bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA] == a))
in_tie = find((bus[e2i[branch[:, F_BUS].astype(int)], BUS_AREA] == a) & (bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA] != a))
out_tie = find((bus[e2i[branch[:, F_BUS].astype(int)], BUS_AREA] != a) & (bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA] == a))
if not any(xfmr + 1):
nxfmr = 0
else:
nxfmr = len(find((bus[e2i[branch[xfmr, F_BUS].astype(int)], BUS_AREA] == a) & (bus[e2i[branch[xfmr, T_BUS].astype(int)], BUS_AREA] == a)))
fd.write('\n%3d %6d %5d %5d %5d %5d %5d %5d %5d %5d %5d' %
(a, len(ib), len(ig), len(igon), \
len(inzld)+len(ildon), len(inzld), len(ildon), \
len(inzsh), len(ibrch), nxfmr, len(in_tie)+len(out_tie)))
fd.write('\n---- ----- ----- ------ ----- ----- ----- ----- ----- ----- -----')
fd.write('\nTot: %6d %5d %5d %5d %5d %5d %5d %5d %5d %5d' %
(nb, len(allg), len(ong), len(nzld)+len(onld),
len(nzld), len(onld), len(nzsh), nl, len(xfmr), len(ties)))
fd.write('\n')
fd.write('\nArea Total Gen Capacity On-line Gen Capacity Generation')
fd.write('\n Num MW MVAr MW MVAr MW MVAr')
fd.write('\n---- ------ ------------------ ------ ------------------ ------ ------')
for i in range(len(s_areas)):
a = s_areas[i]
ig = find((bus[e2i[gen[:, GEN_BUS].astype(int)], BUS_AREA] == a) & ~isload(gen))
igon = find((bus[e2i[gen[:, GEN_BUS].astype(int)], BUS_AREA] == a) & (gen[:, GEN_STATUS] > 0) & ~isload(gen))
fd.write('\n%3d %7.1f %7.1f to %-7.1f %7.1f %7.1f to %-7.1f %7.1f %7.1f' %
(a, sum(gen[ig, PMAX]), sum(gen[ig, QMIN]), sum(gen[ig, QMAX]),
sum(gen[igon, PMAX]), sum(gen[igon, QMIN]), sum(gen[igon, QMAX]),
sum(gen[igon, PG]), sum(gen[igon, QG]) ))
fd.write('\n---- ------ ------------------ ------ ------------------ ------ ------')
fd.write('\nTot: %7.1f %7.1f to %-7.1f %7.1f %7.1f to %-7.1f %7.1f %7.1f' %
(sum(gen[allg, PMAX]), sum(gen[allg, QMIN]), sum(gen[allg, QMAX]),
sum(gen[ong, PMAX]), sum(gen[ong, QMIN]), sum(gen[ong, QMAX]),
sum(gen[ong, PG]), sum(gen[ong, QG]) ))
fd.write('\n')
fd.write('\nArea Disp Load Cap Disp Load Fixed Load Total Load')
fd.write('\n Num MW MVAr MW MVAr MW MVAr MW MVAr')
fd.write('\n---- ------ ------ ------ ------ ------ ------ ------ ------')
Qlim = (gen[:, QMIN] == 0) * gen[:, QMAX] + (gen[:, QMAX] == 0) * gen[:, QMIN]
for i in range(len(s_areas)):
a = s_areas[i]
ildon = find((bus[e2i[gen[:, GEN_BUS].astype(int)], BUS_AREA] == a) & (gen[:, GEN_STATUS] > 0) & isload(gen))
inzld = find((bus[:, BUS_AREA] == a) & logical_or(bus[:, PD], bus[:, QD]))
fd.write('\n%3d %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f' %
(a, -sum(gen[ildon, PMIN]),
-sum(Qlim[ildon]),
-sum(gen[ildon, PG]), -sum(gen[ildon, QG]),
sum(bus[inzld, PD]), sum(bus[inzld, QD]),
-sum(gen[ildon, PG]) + sum(bus[inzld, PD]),
-sum(gen[ildon, QG]) + sum(bus[inzld, QD]) ))
fd.write('\n---- ------ ------ ------ ------ ------ ------ ------ ------')
fd.write('\nTot: %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f' %
(-sum(gen[onld, PMIN]),
-sum(Qlim[onld]),
-sum(gen[onld, PG]), -sum(gen[onld, QG]),
sum(bus[nzld, PD]), sum(bus[nzld, QD]),
-sum(gen[onld, PG]) + sum(bus[nzld, PD]),
-sum(gen[onld, QG]) + sum(bus[nzld, QD])) )
fd.write('\n')
fd.write('\nArea Shunt Inj Branch Series Losses Net Export')
fd.write('\n Num MW MVAr Charging MW MVAr MW MVAr')
fd.write('\n---- ------ ------ -------- ------ ------ ------ ------')
for i in range(len(s_areas)):
a = s_areas[i]
inzsh = find((bus[:, BUS_AREA] == a) & logical_or(bus[:, GS], bus[:, BS]))
ibrch = find((bus[e2i[branch[:, F_BUS].astype(int)], BUS_AREA] == a) & (bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA] == a) & branch[:, BR_STATUS].astype(bool))
in_tie = find((bus[e2i[branch[:, F_BUS].astype(int)], BUS_AREA] != a) & (bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA] == a) & branch[:, BR_STATUS].astype(bool))
out_tie = find((bus[e2i[branch[:, F_BUS].astype(int)], BUS_AREA] == a) & (bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA] != a) & branch[:, BR_STATUS].astype(bool))
fd.write('\n%3d %7.1f %7.1f %7.1f %7.2f %7.2f %7.1f %7.1f' %
(a, -sum(bus[inzsh, VM]**2 * bus[inzsh, GS]),
sum(bus[inzsh, VM]**2 * bus[inzsh, BS]),
sum(fchg[ibrch]) + sum(tchg[ibrch]) + sum(fchg[out_tie]) + sum(tchg[in_tie]),
sum(real(loss[ibrch])) + sum(real(loss[r_[in_tie, out_tie]])) / 2,
sum(imag(loss[ibrch])) + sum(imag(loss[r_[in_tie, out_tie]])) / 2,
sum(branch[in_tie, PT])+sum(branch[out_tie, PF]) - sum(real(loss[r_[in_tie, out_tie]])) / 2,
sum(branch[in_tie, QT])+sum(branch[out_tie, QF]) - sum(imag(loss[r_[in_tie, out_tie]])) / 2 ))
fd.write('\n---- ------ ------ -------- ------ ------ ------ ------')
fd.write('\nTot: %7.1f %7.1f %7.1f %7.2f %7.2f - -' %
(-sum(bus[nzsh, VM]**2 * bus[nzsh, GS]),
sum(bus[nzsh, VM]**2 * bus[nzsh, BS]),
sum(fchg) + sum(tchg), sum(real(loss)), sum(imag(loss)) ))
fd.write('\n')
## generator data
if OUT_GEN:
if isOPF:
genlamP = bus[e2i[gen[:, GEN_BUS].astype(int)], LAM_P]
genlamQ = bus[e2i[gen[:, GEN_BUS].astype(int)], LAM_Q]
fd.write('\n================================================================================')
fd.write('\n| Generator Data |')
fd.write('\n================================================================================')
fd.write('\n Gen Bus Status Pg Qg ')
if isOPF: fd.write(' Lambda ($/MVA-hr)')
fd.write('\n # # (MW) (MVAr) ')
if isOPF: fd.write(' P Q ')
fd.write('\n---- ----- ------ -------- --------')
if isOPF: fd.write(' -------- --------')
for k in range(len(ong)):
i = ong[k]
fd.write('\n%3d %6d %2d ' % (i, gen[i, GEN_BUS], gen[i, GEN_STATUS]))
if (gen[i, GEN_STATUS] > 0) & logical_or(gen[i, PG], gen[i, QG]):
fd.write('%10.2f%10.2f' % (gen[i, PG], gen[i, QG]))
else:
fd.write(' - - ')
if isOPF: fd.write('%10.2f%10.2f' % (genlamP[i], genlamQ[i]))
fd.write('\n -------- --------')
fd.write('\n Total: %9.2f%10.2f' % (sum(gen[ong, PG]), sum(gen[ong, QG])))
fd.write('\n')
if any(onld + 1):
fd.write('\n================================================================================')
fd.write('\n| Dispatchable Load Data |')
fd.write('\n================================================================================')
fd.write('\n Gen Bus Status Pd Qd ')
if isOPF: fd.write(' Lambda ($/MVA-hr)')
fd.write('\n # # (MW) (MVAr) ')
if isOPF: fd.write(' P Q ')
fd.write('\n---- ----- ------ -------- --------')
if isOPF: fd.write(' -------- --------')
for k in range(len(onld)):
i = onld[k]
fd.write('\n%3d %6d %2d ' % (i, gen[i, GEN_BUS], gen[i, GEN_STATUS]))
if (gen[i, GEN_STATUS] > 0) & logical_or(gen[i, PG], gen[i, QG]):
fd.write('%10.2f%10.2f' % (-gen[i, PG], -gen[i, QG]))
else:
fd.write(' - - ')
if isOPF: fd.write('%10.2f%10.2f' % (genlamP[i], genlamQ[i]))
fd.write('\n -------- --------')
fd.write('\n Total: %9.2f%10.2f' % (-sum(gen[onld, PG]), -sum(gen[onld, QG])))
fd.write('\n')
## bus data
if OUT_BUS:
fd.write('\n================================================================================')
fd.write('\n| Bus Data |')
fd.write('\n================================================================================')
fd.write('\n Bus Voltage Generation Load ')
if isOPF: fd.write(' Lambda($/MVA-hr)')
fd.write('\n # Mag(pu) Ang(deg) P (MW) Q (MVAr) P (MW) Q (MVAr)')
if isOPF: fd.write(' P Q ')
fd.write('\n----- ------- -------- -------- -------- -------- --------')
if isOPF: fd.write(' ------- -------')
for i in range(nb):
fd.write('\n%5d%7.3f%9.3f' % tuple(bus[i, [BUS_I, VM, VA]]))
if bus[i, BUS_TYPE] == REF:
fd.write('*')
else:
fd.write(' ')
g = find((gen[:, GEN_STATUS] > 0) & (gen[:, GEN_BUS] == bus[i, BUS_I]) &
~isload(gen))
ld = find((gen[:, GEN_STATUS] > 0) & (gen[:, GEN_BUS] == bus[i, BUS_I]) &
isload(gen))
if any(g + 1):
fd.write('%9.2f%10.2f' % (sum(gen[g, PG]), sum(gen[g, QG])))
else:
fd.write(' - - ')
if logical_or(bus[i, PD], bus[i, QD]) | any(ld + 1):
if any(ld + 1):
fd.write('%10.2f*%9.2f*' % (bus[i, PD] - sum(gen[ld, PG]),
bus[i, QD] - sum(gen[ld, QG])))
else:
fd.write('%10.2f%10.2f ' % tuple(bus[i, [PD, QD]]))
else:
fd.write(' - - ')
if isOPF:
fd.write('%9.3f' % bus[i, LAM_P])
if abs(bus[i, LAM_Q]) > ptol:
fd.write('%8.3f' % bus[i, LAM_Q])
else:
fd.write(' -')
fd.write('\n -------- -------- -------- --------')
fd.write('\n Total: %9.2f %9.2f %9.2f %9.2f' %
(sum(gen[ong, PG]), sum(gen[ong, QG]),
sum(bus[nzld, PD]) - sum(gen[onld, PG]),
sum(bus[nzld, QD]) - sum(gen[onld, QG])))
fd.write('\n')
## branch data
if OUT_BRANCH:
fd.write('\n================================================================================')
fd.write('\n| Branch Data |')
fd.write('\n================================================================================')
fd.write('\nBrnch From To From Bus Injection To Bus Injection Loss (I^2 * Z) ')
fd.write('\n # Bus Bus P (MW) Q (MVAr) P (MW) Q (MVAr) P (MW) Q (MVAr)')
fd.write('\n----- ----- ----- -------- -------- -------- -------- -------- --------')
for i in range(nl):
fd.write('\n%4d%7d%7d%10.2f%10.2f%10.2f%10.2f%10.3f%10.2f' %
(i, branch[i, F_BUS], branch[i, T_BUS],
branch[i, PF], branch[i, QF], branch[i, PT], branch[i, QT],
loss[i].real, loss[i].imag))
fd.write('\n -------- --------')
fd.write('\n Total:%10.3f%10.2f' %
(sum(real(loss)), sum(imag(loss))))
fd.write('\n')
##----- constraint data -----
if isOPF:
ctol = ppopt['OPF_VIOLATION'] ## constraint violation tolerance
## voltage constraints
if (not isDC) & (OUT_V_LIM == 2 | (OUT_V_LIM == 1 &
(any(bus[:, VM] < bus[:, VMIN] + ctol) |
any(bus[:, VM] > bus[:, VMAX] - ctol) |
any(bus[:, MU_VMIN] > ptol) |
any(bus[:, MU_VMAX] > ptol)))):
fd.write('\n================================================================================')
fd.write('\n| Voltage Constraints |')
fd.write('\n================================================================================')
fd.write('\nBus # Vmin mu Vmin |V| Vmax Vmax mu')
fd.write('\n----- -------- ----- ----- ----- --------')
for i in range(nb):
if (OUT_V_LIM == 2) | (OUT_V_LIM == 1 &
((bus[i, VM] < bus[i, VMIN] + ctol) |
(bus[i, VM] > bus[i, VMAX] - ctol) |
(bus[i, MU_VMIN] > ptol) |
(bus[i, MU_VMAX] > ptol))):
fd.write('\n%5d' % bus[i, BUS_I])
if ((bus[i, VM] < bus[i, VMIN] + ctol) |
(bus[i, MU_VMIN] > ptol)):
fd.write('%10.3f' % bus[i, MU_VMIN])
else:
fd.write(' - ')
fd.write('%8.3f%7.3f%7.3f' % tuple(bus[i, [VMIN, VM, VMAX]]))
if (bus[i, VM] > bus[i, VMAX] - ctol) | (bus[i, MU_VMAX] > ptol):
fd.write('%10.3f' % bus[i, MU_VMAX])
else:
fd.write(' - ')
fd.write('\n')
## generator P constraints
if (OUT_PG_LIM == 2) | \
((OUT_PG_LIM == 1) & (any(gen[ong, PG] < gen[ong, PMIN] + ctol) |
any(gen[ong, PG] > gen[ong, PMAX] - ctol) |
any(gen[ong, MU_PMIN] > ptol) |
any(gen[ong, MU_PMAX] > ptol))) | \
((not isDC) & ((OUT_QG_LIM == 2) |
((OUT_QG_LIM == 1) & (any(gen[ong, QG] < gen[ong, QMIN] + ctol) |
any(gen[ong, QG] > gen[ong, QMAX] - ctol) |
any(gen[ong, MU_QMIN] > ptol) |
any(gen[ong, MU_QMAX] > ptol))))):
fd.write('\n================================================================================')
fd.write('\n| Generation Constraints |')
fd.write('\n================================================================================')
if (OUT_PG_LIM == 2) | ((OUT_PG_LIM == 1) &
(any(gen[ong, PG] < gen[ong, PMIN] + ctol) |
any(gen[ong, PG] > gen[ong, PMAX] - ctol) |
any(gen[ong, MU_PMIN] > ptol) |
any(gen[ong, MU_PMAX] > ptol))):
fd.write('\n Gen Bus Active Power Limits')
fd.write('\n # # Pmin mu Pmin Pg Pmax Pmax mu')
fd.write('\n---- ----- ------- -------- -------- -------- -------')
for k in range(len(ong)):
i = ong[k]
if (OUT_PG_LIM == 2) | ((OUT_PG_LIM == 1) &
((gen[i, PG] < gen[i, PMIN] + ctol) |
(gen[i, PG] > gen[i, PMAX] - ctol) |
(gen[i, MU_PMIN] > ptol) | (gen[i, MU_PMAX] > ptol))):
fd.write('\n%4d%6d ' % (i, gen[i, GEN_BUS]))
if (gen[i, PG] < gen[i, PMIN] + ctol) | (gen[i, MU_PMIN] > ptol):
fd.write('%8.3f' % gen[i, MU_PMIN])
else:
fd.write(' - ')
if gen[i, PG]:
fd.write('%10.2f%10.2f%10.2f' % tuple(gen[i, [PMIN, PG, PMAX]]))
else:
fd.write('%10.2f - %10.2f' % tuple(gen[i, [PMIN, PMAX]]))
if (gen[i, PG] > gen[i, PMAX] - ctol) | (gen[i, MU_PMAX] > ptol):
fd.write('%9.3f' % gen[i, MU_PMAX])
else:
fd.write(' - ')
fd.write('\n')
## generator Q constraints
if (not isDC) & ((OUT_QG_LIM == 2) | ((OUT_QG_LIM == 1) &
(any(gen[ong, QG] < gen[ong, QMIN] + ctol) |
any(gen[ong, QG] > gen[ong, QMAX] - ctol) |
any(gen[ong, MU_QMIN] > ptol) |
any(gen[ong, MU_QMAX] > ptol)))):
fd.write('\nGen Bus Reactive Power Limits')
fd.write('\n # # Qmin mu Qmin Qg Qmax Qmax mu')
fd.write('\n--- --- ------- -------- -------- -------- -------')
for k in range(len(ong)):
i = ong[k]
if (OUT_QG_LIM == 2) | ((OUT_QG_LIM == 1) &
((gen[i, QG] < gen[i, QMIN] + ctol) |
(gen[i, QG] > gen[i, QMAX] - ctol) |
(gen[i, MU_QMIN] > ptol) |
(gen[i, MU_QMAX] > ptol))):
fd.write('\n%3d%5d' % (i, gen[i, GEN_BUS]))
if (gen[i, QG] < gen[i, QMIN] + ctol) | (gen[i, MU_QMIN] > ptol):
fd.write('%8.3f' % gen[i, MU_QMIN])
else:
fd.write(' - ')
if gen[i, QG]:
fd.write('%10.2f%10.2f%10.2f' % tuple(gen[i, [QMIN, QG, QMAX]]))
else:
fd.write('%10.2f - %10.2f' % tuple(gen[i, [QMIN, QMAX]]))
if (gen[i, QG] > gen[i, QMAX] - ctol) | (gen[i, MU_QMAX] > ptol):
fd.write('%9.3f' % gen[i, MU_QMAX])
else:
fd.write(' - ')
fd.write('\n')
## dispatchable load P constraints
if (OUT_PG_LIM == 2) | (OUT_QG_LIM == 2) | \
((OUT_PG_LIM == 1) & (any(gen[onld, PG] < gen[onld, PMIN] + ctol) |
any(gen[onld, PG] > gen[onld, PMAX] - ctol) |
any(gen[onld, MU_PMIN] > ptol) |
any(gen[onld, MU_PMAX] > ptol))) | \
((OUT_QG_LIM == 1) & (any(gen[onld, QG] < gen[onld, QMIN] + ctol) |
any(gen[onld, QG] > gen[onld, QMAX] - ctol) |
any(gen[onld, MU_QMIN] > ptol) |
any(gen[onld, MU_QMAX] > ptol))):
fd.write('\n================================================================================')
fd.write('\n| Dispatchable Load Constraints |')
fd.write('\n================================================================================')
if (OUT_PG_LIM == 2) | ((OUT_PG_LIM == 1) &
(any(gen[onld, PG] < gen[onld, PMIN] + ctol) |
any(gen[onld, PG] > gen[onld, PMAX] - ctol) |
any(gen[onld, MU_PMIN] > ptol) |
any(gen[onld, MU_PMAX] > ptol))):
fd.write('\nGen Bus Active Power Limits')
fd.write('\n # # Pmin mu Pmin Pg Pmax Pmax mu')
fd.write('\n--- --- ------- -------- -------- -------- -------')
for k in range(len(onld)):
i = onld[k]
if (OUT_PG_LIM == 2) | ((OUT_PG_LIM == 1) &
((gen[i, PG] < gen[i, PMIN] + ctol) |
(gen[i, PG] > gen[i, PMAX] - ctol) |
(gen[i, MU_PMIN] > ptol) |
(gen[i, MU_PMAX] > ptol))):
fd.write('\n%3d%5d' % (i, gen[i, GEN_BUS]))
if (gen[i, PG] < gen[i, PMIN] + ctol) | (gen[i, MU_PMIN] > ptol):
fd.write('%8.3f' % gen[i, MU_PMIN])
else:
fd.write(' - ')
if gen[i, PG]:
fd.write('%10.2f%10.2f%10.2f' % gen[i, [PMIN, PG, PMAX]])
else:
fd.write('%10.2f - %10.2f' % gen[i, [PMIN, PMAX]])
if (gen[i, PG] > gen[i, PMAX] - ctol) | (gen[i, MU_PMAX] > ptol):
fd.write('%9.3f' % gen[i, MU_PMAX])
else:
fd.write(' - ')
fd.write('\n')
## dispatchable load Q constraints
if (not isDC) & ((OUT_QG_LIM == 2) | ((OUT_QG_LIM == 1) &
(any(gen[onld, QG] < gen[onld, QMIN] + ctol) |
any(gen[onld, QG] > gen[onld, QMAX] - ctol) |
any(gen[onld, MU_QMIN] > ptol) |
any(gen[onld, MU_QMAX] > ptol)))):
fd.write('\nGen Bus Reactive Power Limits')
fd.write('\n # # Qmin mu Qmin Qg Qmax Qmax mu')
fd.write('\n--- --- ------- -------- -------- -------- -------')
for k in range(len(onld)):
i = onld[k]
if (OUT_QG_LIM == 2) | ((OUT_QG_LIM == 1) &
((gen[i, QG] < gen[i, QMIN] + ctol) |
(gen[i, QG] > gen[i, QMAX] - ctol) |
(gen[i, MU_QMIN] > ptol) |
(gen[i, MU_QMAX] > ptol))):
fd.write('\n%3d%5d' % (i, gen(i, GEN_BUS)))
if (gen[i, QG] < gen[i, QMIN] + ctol) | (gen[i, MU_QMIN] > ptol):
fd.write('%8.3f' % gen[i, MU_QMIN])
else:
fd.write(' - ')
if gen[i, QG]:
fd.write('%10.2f%10.2f%10.2f' % gen[i, [QMIN, QG, QMAX]])
else:
fd.write('%10.2f - %10.2f' % gen[i, [QMIN, QMAX]])
if (gen[i, QG] > gen[i, QMAX] - ctol) | (gen[i, MU_QMAX] > ptol):
fd.write('%9.3f' % gen[i, MU_QMAX])
else:
fd.write(' - ')
fd.write('\n')
## line flow constraints
if (ppopt['OPF_FLOW_LIM'] == 1) | isDC: ## P limit
Ff = branch[:, PF]
Ft = branch[:, PT]
strg = '\n # Bus Pf mu Pf |Pmax| Pt Pt mu Bus'
elif ppopt['OPF_FLOW_LIM'] == 2: ## |I| limit
Ff = abs( (branch[:, PF] + 1j * branch[:, QF]) / V[e2i[branch[:, F_BUS].astype(int)]] )
Ft = abs( (branch[:, PT] + 1j * branch[:, QT]) / V[e2i[branch[:, T_BUS].astype(int)]] )
strg = '\n # Bus |If| mu |If| |Imax| |It| |It| mu Bus'
else: ## |S| limit
Ff = abs(branch[:, PF] + 1j * branch[:, QF])
Ft = abs(branch[:, PT] + 1j * branch[:, QT])
strg = '\n # Bus |Sf| mu |Sf| |Smax| |St| |St| mu Bus'
if (OUT_LINE_LIM == 2) | ((OUT_LINE_LIM == 1) &
(any((branch[:, RATE_A] != 0) & (abs(Ff) > branch[:, RATE_A] - ctol)) |
any((branch[:, RATE_A] != 0) & (abs(Ft) > branch[:, RATE_A] - ctol)) |
any(branch[:, MU_SF] > ptol) |
any(branch[:, MU_ST] > ptol))):
fd.write('\n================================================================================')
fd.write('\n| Branch Flow Constraints |')
fd.write('\n================================================================================')
fd.write('\nBrnch From "From" End Limit "To" End To')
fd.write(strg)
fd.write('\n----- ----- ------- -------- -------- -------- ------- -----')
for i in range(nl):
if (OUT_LINE_LIM == 2) | ((OUT_LINE_LIM == 1) &
(((branch[i, RATE_A] != 0) & (abs(Ff[i]) > branch[i, RATE_A] - ctol)) |
((branch[i, RATE_A] != 0) & (abs(Ft[i]) > branch[i, RATE_A] - ctol)) |
(branch[i, MU_SF] > ptol) | (branch[i, MU_ST] > ptol))):
fd.write('\n%4d%7d' % (i, branch[i, F_BUS]))
if (Ff[i] > branch[i, RATE_A] - ctol) | (branch[i, MU_SF] > ptol):
fd.write('%10.3f' % branch[i, MU_SF])
else:
fd.write(' - ')
fd.write('%9.2f%10.2f%10.2f' %
(Ff[i], branch[i, RATE_A], Ft[i]))
if (Ft[i] > branch[i, RATE_A] - ctol) | (branch[i, MU_ST] > ptol):
fd.write('%10.3f' % branch[i, MU_ST])
else:
fd.write(' - ')
fd.write('%6d' % branch[i, T_BUS])
fd.write('\n')
## execute userfcn callbacks for 'printpf' stage
if have_results_struct & results.has_key('userfcn'):
if not isOPF: ## turn off option for all constraints if it isn't an OPF
ppopt = ppoption(ppopt, 'OUT_ALL_LIM', 0)
run_userfcn(results["userfcn"], 'printpf', results, fd, ppopt)
def printpf(baseMVA,
bus=None,
gen=None,
branch=None,
f=None,
success=None,
et=None,
fd=None,
ppopt=None):
"""Prints power flow results.
Prints power flow and optimal power flow results to C{fd} (a file
descriptor which defaults to C{stdout}), with the details of what
gets printed controlled by the optional C{ppopt} argument, which is a
PYPOWER options vector (see L{ppoption} for details).
The data can either be supplied in a single C{results} dict, or
in the individual arguments: C{baseMVA}, C{bus}, C{gen}, C{branch}, C{f},
C{success} and C{et}, where C{f} is the OPF objective function value,
C{success} is C{True} if the solution converged and C{False} otherwise,
and C{et} is the elapsed time for the computation in seconds. If C{f} is
given, it is assumed that the output is from an OPF run, otherwise it is
assumed to be a simple power flow run.
Examples::
ppopt = ppoptions(OUT_GEN=1, OUT_BUS=0, OUT_BRANCH=0)
fd = open(fname, 'w+b')
results = runopf(ppc)
printpf(results)
printpf(results, fd)
printpf(results, fd, ppopt)
printpf(baseMVA, bus, gen, branch, f, success, et)
printpf(baseMVA, bus, gen, branch, f, success, et, fd)
printpf(baseMVA, bus, gen, branch, f, success, et, fd, ppopt)
fd.close()
@author: Ray Zimmerman (PSERC Cornell)
"""
##----- initialization -----
## default arguments
if isinstance(baseMVA, dict):
have_results_struct = 1
results = baseMVA
if gen is None:
ppopt = ppoption() ## use default options
else:
ppopt = gen
if (ppopt['OUT_ALL'] == 0):
return ## nothin' to see here, bail out now
if bus is None:
fd = stdout ## print to stdout by default
else:
fd = bus
baseMVA, bus, gen, branch, success, et = \
results["baseMVA"], results["bus"], results["gen"], \
results["branch"], results["success"], results["et"]
if 'f' in results:
f = results["f"]
else:
f = None
else:
have_results_struct = 0
if ppopt is None:
ppopt = ppoption() ## use default options
if fd is None:
fd = stdout ## print to stdout by default
if ppopt['OUT_ALL'] == 0:
return ## nothin' to see here, bail out now
isOPF = f is not None ## FALSE -> only simple PF data, TRUE -> OPF data
## options
isDC = ppopt['PF_DC'] ## use DC formulation?
OUT_ALL = ppopt['OUT_ALL']
OUT_ANY = OUT_ALL == 1 ## set to true if any pretty output is to be generated
OUT_SYS_SUM = (OUT_ALL == 1) or ((OUT_ALL == -1) and ppopt['OUT_SYS_SUM'])
OUT_AREA_SUM = (OUT_ALL == 1) or ((OUT_ALL == -1)
and ppopt['OUT_AREA_SUM'])
OUT_BUS = (OUT_ALL == 1) or ((OUT_ALL == -1) and ppopt['OUT_BUS'])
OUT_BRANCH = (OUT_ALL == 1) or ((OUT_ALL == -1) and ppopt['OUT_BRANCH'])
OUT_GEN = (OUT_ALL == 1) or ((OUT_ALL == -1) and ppopt['OUT_GEN'])
OUT_ANY = OUT_ANY | (
(OUT_ALL == -1) and
(OUT_SYS_SUM or OUT_AREA_SUM or OUT_BUS or OUT_BRANCH or OUT_GEN))
if OUT_ALL == -1:
OUT_ALL_LIM = ppopt['OUT_ALL_LIM']
elif OUT_ALL == 1:
OUT_ALL_LIM = 2
else:
OUT_ALL_LIM = 0
OUT_ANY = OUT_ANY or (OUT_ALL_LIM >= 1)
if OUT_ALL_LIM == -1:
OUT_V_LIM = ppopt['OUT_V_LIM']
OUT_LINE_LIM = ppopt['OUT_LINE_LIM']
OUT_PG_LIM = ppopt['OUT_PG_LIM']
OUT_QG_LIM = ppopt['OUT_QG_LIM']
else:
OUT_V_LIM = OUT_ALL_LIM
OUT_LINE_LIM = OUT_ALL_LIM
OUT_PG_LIM = OUT_ALL_LIM
OUT_QG_LIM = OUT_ALL_LIM
OUT_ANY = OUT_ANY or (
(OUT_ALL_LIM == -1) and
(OUT_V_LIM or OUT_LINE_LIM or OUT_PG_LIM or OUT_QG_LIM))
ptol = 1e-4 ## tolerance for displaying shadow prices
## create map of external bus numbers to bus indices
i2e = bus[:, BUS_I].astype(int)
e2i = zeros(max(i2e) + 1, int)
e2i[i2e] = arange(bus.shape[0])
## sizes of things
nb = bus.shape[0] ## number of buses
nl = branch.shape[0] ## number of branches
ng = gen.shape[0] ## number of generators
## zero out some data to make printout consistent for DC case
if isDC:
bus[:, r_[QD, BS]] = zeros((nb, 2))
gen[:, r_[QG, QMAX, QMIN]] = zeros((ng, 3))
branch[:, r_[BR_R, BR_B]] = zeros((nl, 2))
## parameters
ties = find(
bus[e2i[branch[:, F_BUS].astype(int)],
BUS_AREA] != bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA])
## area inter-ties
tap = ones(nl) ## default tap ratio = 1 for lines
xfmr = find(branch[:, TAP]) ## indices of transformers
tap[xfmr] = branch[xfmr, TAP] ## include transformer tap ratios
tap = tap * exp(1j * pi / 180 * branch[:, SHIFT]) ## add phase shifters
nzld = find((bus[:, PD] != 0.0) | (bus[:, QD] != 0.0))
sorted_areas = sort(bus[:, BUS_AREA])
## area numbers
s_areas = sorted_areas[r_[1, find(diff(sorted_areas)) + 1]]
nzsh = find((bus[:, GS] != 0.0) | (bus[:, BS] != 0.0))
allg = find(~isload(gen))
ong = find((gen[:, GEN_STATUS] > 0) & ~isload(gen))
onld = find((gen[:, GEN_STATUS] > 0) & isload(gen))
V = bus[:, VM] * exp(-1j * pi / 180 * bus[:, VA])
out = find(branch[:, BR_STATUS] == 0) ## out-of-service branches
nout = len(out)
if isDC:
loss = zeros(nl)
else:
loss = baseMVA * abs(V[e2i[ branch[:, F_BUS].astype(int) ]] / tap -
V[e2i[ branch[:, T_BUS].astype(int) ]])**2 / \
(branch[:, BR_R] - 1j * branch[:, BR_X])
fchg = abs(V[e2i[branch[:, F_BUS].astype(int)]] /
tap)**2 * branch[:, BR_B] * baseMVA / 2
tchg = abs(
V[e2i[branch[:, T_BUS].astype(int)]])**2 * branch[:,
BR_B] * baseMVA / 2
loss[out] = zeros(nout)
fchg[out] = zeros(nout)
tchg[out] = zeros(nout)
##----- print the stuff -----
if OUT_ANY:
## convergence & elapsed time
if success:
fd.write('\nConverged in %.2f seconds' % et)
else:
fd.write('\nDid not converge (%.2f seconds)\n' % et)
## objective function value
if isOPF:
fd.write('\nObjective Function Value = %.2f $/hr' % f)
if OUT_SYS_SUM:
fd.write(
'\n================================================================================'
)
fd.write(
'\n| System Summary |'
)
fd.write(
'\n================================================================================'
)
fd.write(
'\n\nHow many? How much? P (MW) Q (MVAr)'
)
fd.write(
'\n--------------------- ------------------- ------------- -----------------'
)
fd.write(
'\nBuses %6d Total Gen Capacity %7.1f %7.1f to %.1f'
% (nb, sum(gen[allg, PMAX]), sum(gen[allg,
QMIN]), sum(gen[allg, QMAX])))
fd.write(
'\nGenerators %5d On-line Capacity %7.1f %7.1f to %.1f'
% (len(allg), sum(gen[ong, PMAX]), sum(
gen[ong, QMIN]), sum(gen[ong, QMAX])))
fd.write(
'\nCommitted Gens %5d Generation (actual) %7.1f %7.1f'
% (len(ong), sum(gen[ong, PG]), sum(gen[ong, QG])))
fd.write(
'\nLoads %5d Load %7.1f %7.1f'
% (len(nzld) + len(onld), sum(bus[nzld, PD]) - sum(gen[onld, PG]),
sum(bus[nzld, QD]) - sum(gen[onld, QG])))
fd.write(
'\n Fixed %5d Fixed %7.1f %7.1f'
% (len(nzld), sum(bus[nzld, PD]), sum(bus[nzld, QD])))
fd.write(
'\n Dispatchable %5d Dispatchable %7.1f of %-7.1f%7.1f'
% (len(onld), -sum(gen[onld, PG]), -sum(gen[onld, PMIN]),
-sum(gen[onld, QG])))
fd.write(
'\nShunts %5d Shunt (inj) %7.1f %7.1f'
% (len(nzsh), -sum(bus[nzsh, VM]**2 * bus[nzsh, GS]),
sum(bus[nzsh, VM]**2 * bus[nzsh, BS])))
fd.write(
'\nBranches %5d Losses (I^2 * Z) %8.2f %8.2f'
% (nl, sum(loss.real), sum(loss.imag)))
fd.write(
'\nTransformers %5d Branch Charging (inj) - %7.1f'
% (len(xfmr), sum(fchg) + sum(tchg)))
fd.write(
'\nInter-ties %5d Total Inter-tie Flow %7.1f %7.1f'
% (len(ties), sum(abs(branch[ties, PF] - branch[ties, PT])) / 2,
sum(abs(branch[ties, QF] - branch[ties, QT])) / 2))
fd.write('\nAreas %5d' % len(s_areas))
fd.write('\n')
fd.write(
'\n Minimum Maximum')
fd.write(
'\n ------------------------- --------------------------------'
)
minv = min(bus[:, VM])
mini = argmin(bus[:, VM])
maxv = max(bus[:, VM])
maxi = argmax(bus[:, VM])
fd.write(
'\nVoltage Magnitude %7.3f p.u. @ bus %-4d %7.3f p.u. @ bus %-4d'
% (minv, bus[mini, BUS_I], maxv, bus[maxi, BUS_I]))
minv = min(bus[:, VA])
mini = argmin(bus[:, VA])
maxv = max(bus[:, VA])
maxi = argmax(bus[:, VA])
fd.write(
'\nVoltage Angle %8.2f deg @ bus %-4d %8.2f deg @ bus %-4d'
% (minv, bus[mini, BUS_I], maxv, bus[maxi, BUS_I]))
if not isDC:
maxv = max(loss.real)
maxi = argmax(loss.real)
fd.write(
'\nP Losses (I^2*R) - %8.2f MW @ line %d-%d'
% (maxv, branch[maxi, F_BUS], branch[maxi, T_BUS]))
maxv = max(loss.imag)
maxi = argmax(loss.imag)
fd.write(
'\nQ Losses (I^2*X) - %8.2f MVAr @ line %d-%d'
% (maxv, branch[maxi, F_BUS], branch[maxi, T_BUS]))
if isOPF:
minv = min(bus[:, LAM_P])
mini = argmin(bus[:, LAM_P])
maxv = max(bus[:, LAM_P])
maxi = argmax(bus[:, LAM_P])
fd.write(
'\nLambda P %8.2f $/MWh @ bus %-4d %8.2f $/MWh @ bus %-4d'
% (minv, bus[mini, BUS_I], maxv, bus[maxi, BUS_I]))
minv = min(bus[:, LAM_Q])
mini = argmin(bus[:, LAM_Q])
maxv = max(bus[:, LAM_Q])
maxi = argmax(bus[:, LAM_Q])
fd.write(
'\nLambda Q %8.2f $/MWh @ bus %-4d %8.2f $/MWh @ bus %-4d'
% (minv, bus[mini, BUS_I], maxv, bus[maxi, BUS_I]))
fd.write('\n')
if OUT_AREA_SUM:
fd.write(
'\n================================================================================'
)
fd.write(
'\n| Area Summary |'
)
fd.write(
'\n================================================================================'
)
fd.write(
'\nArea # of # of Gens # of Loads # of # of # of # of'
)
fd.write(
'\n Num Buses Total Online Total Fixed Disp Shunt Brchs Xfmrs Ties'
)
fd.write(
'\n---- ----- ----- ------ ----- ----- ----- ----- ----- ----- -----'
)
for i in range(len(s_areas)):
a = s_areas[i]
ib = find(bus[:, BUS_AREA] == a)
ig = find((bus[e2i[gen[:, GEN_BUS].astype(int)], BUS_AREA] == a)
& ~isload(gen))
igon = find((bus[e2i[gen[:, GEN_BUS].astype(int)], BUS_AREA] == a)
& (gen[:, GEN_STATUS] > 0) & ~isload(gen))
ildon = find((bus[e2i[gen[:, GEN_BUS].astype(int)], BUS_AREA] == a)
& (gen[:, GEN_STATUS] > 0) & isload(gen))
inzld = find((bus[:, BUS_AREA] == a)
& logical_or(bus[:, PD], bus[:, QD]))
inzsh = find((bus[:, BUS_AREA] == a)
& logical_or(bus[:, GS], bus[:, BS]))
ibrch = find(
(bus[e2i[branch[:, F_BUS].astype(int)], BUS_AREA] == a)
& (bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA] == a))
in_tie = find(
(bus[e2i[branch[:, F_BUS].astype(int)], BUS_AREA] == a)
& (bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA] != a))
out_tie = find(
(bus[e2i[branch[:, F_BUS].astype(int)], BUS_AREA] != a)
& (bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA] == a))
if not any(xfmr + 1):
nxfmr = 0
else:
nxfmr = len(
find((bus[e2i[branch[xfmr, F_BUS].astype(int)],
BUS_AREA] == a)
& (bus[e2i[branch[xfmr, T_BUS].astype(int)],
BUS_AREA] == a)))
fd.write('\n%3d %6d %5d %5d %5d %5d %5d %5d %5d %5d %5d' %
(a, len(ib), len(ig), len(igon), \
len(inzld)+len(ildon), len(inzld), len(ildon), \
len(inzsh), len(ibrch), nxfmr, len(in_tie)+len(out_tie)))
fd.write(
'\n---- ----- ----- ------ ----- ----- ----- ----- ----- ----- -----'
)
fd.write(
'\nTot: %6d %5d %5d %5d %5d %5d %5d %5d %5d %5d' %
(nb, len(allg), len(ong), len(nzld) + len(onld), len(nzld),
len(onld), len(nzsh), nl, len(xfmr), len(ties)))
fd.write('\n')
fd.write(
'\nArea Total Gen Capacity On-line Gen Capacity Generation'
)
fd.write(
'\n Num MW MVAr MW MVAr MW MVAr'
)
fd.write(
'\n---- ------ ------------------ ------ ------------------ ------ ------'
)
for i in range(len(s_areas)):
a = s_areas[i]
ig = find((bus[e2i[gen[:, GEN_BUS].astype(int)], BUS_AREA] == a)
& ~isload(gen))
igon = find((bus[e2i[gen[:, GEN_BUS].astype(int)], BUS_AREA] == a)
& (gen[:, GEN_STATUS] > 0) & ~isload(gen))
fd.write(
'\n%3d %7.1f %7.1f to %-7.1f %7.1f %7.1f to %-7.1f %7.1f %7.1f'
%
(a, sum(gen[ig, PMAX]), sum(gen[ig, QMIN]), sum(
gen[ig, QMAX]), sum(gen[igon, PMAX]), sum(gen[igon, QMIN]),
sum(gen[igon, QMAX]), sum(gen[igon, PG]), sum(gen[igon, QG])))
fd.write(
'\n---- ------ ------------------ ------ ------------------ ------ ------'
)
fd.write(
'\nTot: %7.1f %7.1f to %-7.1f %7.1f %7.1f to %-7.1f %7.1f %7.1f'
% (sum(gen[allg, PMAX]), sum(gen[allg, QMIN]), sum(
gen[allg, QMAX]), sum(gen[ong, PMAX]), sum(gen[ong, QMIN]),
sum(gen[ong, QMAX]), sum(gen[ong, PG]), sum(gen[ong, QG])))
fd.write('\n')
fd.write(
'\nArea Disp Load Cap Disp Load Fixed Load Total Load'
)
fd.write(
'\n Num MW MVAr MW MVAr MW MVAr MW MVAr'
)
fd.write(
'\n---- ------ ------ ------ ------ ------ ------ ------ ------'
)
Qlim = (gen[:, QMIN] == 0) * gen[:, QMAX] + (gen[:, QMAX]
== 0) * gen[:, QMIN]
for i in range(len(s_areas)):
a = s_areas[i]
ildon = find((bus[e2i[gen[:, GEN_BUS].astype(int)], BUS_AREA] == a)
& (gen[:, GEN_STATUS] > 0) & isload(gen))
inzld = find((bus[:, BUS_AREA] == a)
& logical_or(bus[:, PD], bus[:, QD]))
fd.write(
'\n%3d %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f'
% (a, -sum(gen[ildon, PMIN]), -sum(Qlim[ildon]),
-sum(gen[ildon, PG]), -sum(gen[ildon, QG]),
sum(bus[inzld, PD]), sum(bus[inzld, QD]),
-sum(gen[ildon, PG]) + sum(bus[inzld, PD]),
-sum(gen[ildon, QG]) + sum(bus[inzld, QD])))
fd.write(
'\n---- ------ ------ ------ ------ ------ ------ ------ ------'
)
fd.write(
'\nTot: %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f %7.1f' %
(-sum(gen[onld, PMIN]), -sum(Qlim[onld]), -sum(gen[onld, PG]),
-sum(gen[onld, QG]), sum(bus[nzld, PD]), sum(
bus[nzld, QD]), -sum(gen[onld, PG]) + sum(bus[nzld, PD]),
-sum(gen[onld, QG]) + sum(bus[nzld, QD])))
fd.write('\n')
fd.write(
'\nArea Shunt Inj Branch Series Losses Net Export'
)
fd.write(
'\n Num MW MVAr Charging MW MVAr MW MVAr'
)
fd.write(
'\n---- ------ ------ -------- ------ ------ ------ ------'
)
for i in range(len(s_areas)):
a = s_areas[i]
inzsh = find((bus[:, BUS_AREA] == a)
& logical_or(bus[:, GS], bus[:, BS]))
ibrch = find(
(bus[e2i[branch[:, F_BUS].astype(int)], BUS_AREA] == a)
& (bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA] == a)
& branch[:, BR_STATUS].astype(bool))
in_tie = find(
(bus[e2i[branch[:, F_BUS].astype(int)], BUS_AREA] != a)
& (bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA] == a)
& branch[:, BR_STATUS].astype(bool))
out_tie = find(
(bus[e2i[branch[:, F_BUS].astype(int)], BUS_AREA] == a)
& (bus[e2i[branch[:, T_BUS].astype(int)], BUS_AREA] != a)
& branch[:, BR_STATUS].astype(bool))
fd.write(
'\n%3d %7.1f %7.1f %7.1f %7.2f %7.2f %7.1f %7.1f' %
(a, -sum(bus[inzsh, VM]**2 * bus[inzsh, GS]),
sum(bus[inzsh, VM]**2 * bus[inzsh, BS]), sum(fchg[ibrch]) +
sum(tchg[ibrch]) + sum(fchg[out_tie]) + sum(tchg[in_tie]),
sum(real(loss[ibrch])) +
sum(real(loss[r_[in_tie, out_tie]])) / 2,
sum(imag(loss[ibrch])) +
sum(imag(loss[r_[in_tie, out_tie]])) / 2,
sum(branch[in_tie, PT]) + sum(branch[out_tie, PF]) -
sum(real(loss[r_[in_tie, out_tie]])) / 2,
sum(branch[in_tie, QT]) + sum(branch[out_tie, QF]) -
sum(imag(loss[r_[in_tie, out_tie]])) / 2))
fd.write(
'\n---- ------ ------ -------- ------ ------ ------ ------'
)
fd.write(
'\nTot: %7.1f %7.1f %7.1f %7.2f %7.2f - -' %
(-sum(bus[nzsh, VM]**2 * bus[nzsh, GS]),
sum(bus[nzsh, VM]**2 * bus[nzsh, BS]), sum(fchg) + sum(tchg),
sum(real(loss)), sum(imag(loss))))
fd.write('\n')
## generator data
if OUT_GEN:
if isOPF:
genlamP = bus[e2i[gen[:, GEN_BUS].astype(int)], LAM_P]
genlamQ = bus[e2i[gen[:, GEN_BUS].astype(int)], LAM_Q]
fd.write(
'\n================================================================================'
)
fd.write(
'\n| Generator Data |'
)
fd.write(
'\n================================================================================'
)
fd.write('\n Gen Bus Status Pg Qg ')
if isOPF: fd.write(' Lambda ($/MVA-hr)')
fd.write('\n # # (MW) (MVAr) ')
if isOPF: fd.write(' P Q ')
fd.write('\n---- ----- ------ -------- --------')
if isOPF: fd.write(' -------- --------')
for k in range(len(ong)):
i = ong[k]
fd.write('\n%3d %6d %2d ' %
(i, gen[i, GEN_BUS], gen[i, GEN_STATUS]))
if (gen[i, GEN_STATUS] > 0) & logical_or(gen[i, PG], gen[i, QG]):
fd.write('%10.2f%10.2f' % (gen[i, PG], gen[i, QG]))
else:
fd.write(' - - ')
if isOPF: fd.write('%10.2f%10.2f' % (genlamP[i], genlamQ[i]))
fd.write('\n -------- --------')
fd.write('\n Total: %9.2f%10.2f' %
(sum(gen[ong, PG]), sum(gen[ong, QG])))
fd.write('\n')
if any(onld + 1):
fd.write(
'\n================================================================================'
)
fd.write(
'\n| Dispatchable Load Data |'
)
fd.write(
'\n================================================================================'
)
fd.write('\n Gen Bus Status Pd Qd ')
if isOPF: fd.write(' Lambda ($/MVA-hr)')
fd.write('\n # # (MW) (MVAr) ')
if isOPF: fd.write(' P Q ')
fd.write('\n---- ----- ------ -------- --------')
if isOPF: fd.write(' -------- --------')
for k in range(len(onld)):
i = onld[k]
fd.write('\n%3d %6d %2d ' %
(i, gen[i, GEN_BUS], gen[i, GEN_STATUS]))
if (gen[i, GEN_STATUS] > 0) & logical_or(
gen[i, PG], gen[i, QG]):
fd.write('%10.2f%10.2f' % (-gen[i, PG], -gen[i, QG]))
else:
fd.write(' - - ')
if isOPF: fd.write('%10.2f%10.2f' % (genlamP[i], genlamQ[i]))
fd.write('\n -------- --------')
fd.write('\n Total: %9.2f%10.2f' %
(-sum(gen[onld, PG]), -sum(gen[onld, QG])))
fd.write('\n')
## bus data
if OUT_BUS:
fd.write(
'\n================================================================================'
)
fd.write(
'\n| Bus Data |'
)
fd.write(
'\n================================================================================'
)
fd.write(
'\n Bus Voltage Generation Load ')
if isOPF: fd.write(' Lambda($/MVA-hr)')
fd.write(
'\n # Mag(pu) Ang(deg) P (MW) Q (MVAr) P (MW) Q (MVAr)')
if isOPF: fd.write(' P Q ')
fd.write(
'\n----- ------- -------- -------- -------- -------- --------')
if isOPF: fd.write(' ------- -------')
for i in range(nb):
fd.write('\n%5d%7.3f%9.3f' % tuple(bus[i, [BUS_I, VM, VA]]))
if bus[i, BUS_TYPE] == REF:
fd.write('*')
else:
fd.write(' ')
g = find((gen[:, GEN_STATUS] > 0)
& (gen[:, GEN_BUS] == bus[i, BUS_I]) & ~isload(gen))
ld = find((gen[:, GEN_STATUS] > 0)
& (gen[:, GEN_BUS] == bus[i, BUS_I]) & isload(gen))
if any(g + 1):
fd.write('%9.2f%10.2f' % (sum(gen[g, PG]), sum(gen[g, QG])))
else:
fd.write(' - - ')
if logical_or(bus[i, PD], bus[i, QD]) | any(ld + 1):
if any(ld + 1):
fd.write('%10.2f*%9.2f*' % (bus[i, PD] - sum(gen[ld, PG]),
bus[i, QD] - sum(gen[ld, QG])))
else:
fd.write('%10.2f%10.2f ' % tuple(bus[i, [PD, QD]]))
else:
fd.write(' - - ')
if isOPF:
fd.write('%9.3f' % bus[i, LAM_P])
if abs(bus[i, LAM_Q]) > ptol:
fd.write('%8.3f' % bus[i, LAM_Q])
else:
fd.write(' -')
fd.write(
'\n -------- -------- -------- --------')
fd.write('\n Total: %9.2f %9.2f %9.2f %9.2f' %
(sum(gen[ong, PG]), sum(gen[ong, QG]), sum(bus[nzld, PD]) -
sum(gen[onld, PG]), sum(bus[nzld, QD]) - sum(gen[onld, QG])))
fd.write('\n')
## branch data
if OUT_BRANCH:
fd.write(
'\n================================================================================'
)
fd.write(
'\n| Branch Data |'
)
fd.write(
'\n================================================================================'
)
fd.write(
'\nBrnch From To From Bus Injection To Bus Injection Loss (I^2 * Z) '
)
fd.write(
'\n # Bus Bus P (MW) Q (MVAr) P (MW) Q (MVAr) P (MW) Q (MVAr)'
)
fd.write(
'\n----- ----- ----- -------- -------- -------- -------- -------- --------'
)
for i in range(nl):
fd.write('\n%4d%7d%7d%10.2f%10.2f%10.2f%10.2f%10.3f%10.2f' %
(i, branch[i, F_BUS], branch[i, T_BUS], branch[i, PF],
branch[i, QF], branch[i, PT], branch[i, QT],
loss[i].real, loss[i].imag))
fd.write(
'\n -------- --------'
)
fd.write(
'\n Total:%10.3f%10.2f'
% (sum(real(loss)), sum(imag(loss))))
fd.write('\n')
##----- constraint data -----
if isOPF:
ctol = ppopt['OPF_VIOLATION'] ## constraint violation tolerance
## voltage constraints
if (not isDC) & (
OUT_V_LIM == 2 |
(OUT_V_LIM == 1 &
(any(bus[:, VM] < bus[:, VMIN] + ctol)
| any(bus[:, VM] > bus[:, VMAX] - ctol)
| any(bus[:, MU_VMIN] > ptol) | any(bus[:, MU_VMAX] > ptol)))):
fd.write(
'\n================================================================================'
)
fd.write(
'\n| Voltage Constraints |'
)
fd.write(
'\n================================================================================'
)
fd.write('\nBus # Vmin mu Vmin |V| Vmax Vmax mu')
fd.write('\n----- -------- ----- ----- ----- --------')
for i in range(nb):
if (OUT_V_LIM == 2) | (OUT_V_LIM == 1 &
((bus[i, VM] < bus[i, VMIN] + ctol) |
(bus[i, VM] > bus[i, VMAX] - ctol) |
(bus[i, MU_VMIN] > ptol) |
(bus[i, MU_VMAX] > ptol))):
fd.write('\n%5d' % bus[i, BUS_I])
if ((bus[i, VM] < bus[i, VMIN] + ctol) |
(bus[i, MU_VMIN] > ptol)):
fd.write('%10.3f' % bus[i, MU_VMIN])
else:
fd.write(' - ')
fd.write('%8.3f%7.3f%7.3f' %
tuple(bus[i, [VMIN, VM, VMAX]]))
if (bus[i, VM] > bus[i, VMAX] - ctol) | (bus[i, MU_VMAX] >
ptol):
fd.write('%10.3f' % bus[i, MU_VMAX])
else:
fd.write(' - ')
fd.write('\n')
## generator P constraints
if (OUT_PG_LIM == 2) | \
((OUT_PG_LIM == 1) & (any(gen[ong, PG] < gen[ong, PMIN] + ctol) |
any(gen[ong, PG] > gen[ong, PMAX] - ctol) |
any(gen[ong, MU_PMIN] > ptol) |
any(gen[ong, MU_PMAX] > ptol))) | \
((not isDC) & ((OUT_QG_LIM == 2) |
((OUT_QG_LIM == 1) & (any(gen[ong, QG] < gen[ong, QMIN] + ctol) |
any(gen[ong, QG] > gen[ong, QMAX] - ctol) |
any(gen[ong, MU_QMIN] > ptol) |
any(gen[ong, MU_QMAX] > ptol))))):
fd.write(
'\n================================================================================'
)
fd.write(
'\n| Generation Constraints |'
)
fd.write(
'\n================================================================================'
)
if (OUT_PG_LIM == 2) | (
(OUT_PG_LIM == 1) &
(any(gen[ong, PG] < gen[ong, PMIN] + ctol)
| any(gen[ong, PG] > gen[ong, PMAX] - ctol)
| any(gen[ong, MU_PMIN] > ptol) | any(gen[ong, MU_PMAX] > ptol))):
fd.write('\n Gen Bus Active Power Limits')
fd.write(
'\n # # Pmin mu Pmin Pg Pmax Pmax mu'
)
fd.write(
'\n---- ----- ------- -------- -------- -------- -------'
)
for k in range(len(ong)):
i = ong[k]
if (OUT_PG_LIM == 2) | ((OUT_PG_LIM == 1) &
((gen[i, PG] < gen[i, PMIN] + ctol) |
(gen[i, PG] > gen[i, PMAX] - ctol) |
(gen[i, MU_PMIN] > ptol) |
(gen[i, MU_PMAX] > ptol))):
fd.write('\n%4d%6d ' % (i, gen[i, GEN_BUS]))
if (gen[i, PG] < gen[i, PMIN] + ctol) | (gen[i, MU_PMIN] >
ptol):
fd.write('%8.3f' % gen[i, MU_PMIN])
else:
fd.write(' - ')
if gen[i, PG]:
fd.write('%10.2f%10.2f%10.2f' %
tuple(gen[i, [PMIN, PG, PMAX]]))
else:
fd.write('%10.2f - %10.2f' %
tuple(gen[i, [PMIN, PMAX]]))
if (gen[i, PG] > gen[i, PMAX] - ctol) | (gen[i, MU_PMAX] >
ptol):
fd.write('%9.3f' % gen[i, MU_PMAX])
else:
fd.write(' - ')
fd.write('\n')
## generator Q constraints
if (not isDC) & ((OUT_QG_LIM == 2) | (
(OUT_QG_LIM == 1) &
(any(gen[ong, QG] < gen[ong, QMIN] + ctol)
| any(gen[ong, QG] > gen[ong, QMAX] - ctol) |
any(gen[ong, MU_QMIN] > ptol) | any(gen[ong, MU_QMAX] > ptol)))):
fd.write('\nGen Bus Reactive Power Limits')
fd.write(
'\n # # Qmin mu Qmin Qg Qmax Qmax mu')
fd.write(
'\n--- --- ------- -------- -------- -------- -------')
for k in range(len(ong)):
i = ong[k]
if (OUT_QG_LIM == 2) | ((OUT_QG_LIM == 1) &
((gen[i, QG] < gen[i, QMIN] + ctol) |
(gen[i, QG] > gen[i, QMAX] - ctol) |
(gen[i, MU_QMIN] > ptol) |
(gen[i, MU_QMAX] > ptol))):
fd.write('\n%3d%5d' % (i, gen[i, GEN_BUS]))
if (gen[i, QG] < gen[i, QMIN] + ctol) | (gen[i, MU_QMIN] >
ptol):
fd.write('%8.3f' % gen[i, MU_QMIN])
else:
fd.write(' - ')
if gen[i, QG]:
fd.write('%10.2f%10.2f%10.2f' %
tuple(gen[i, [QMIN, QG, QMAX]]))
else:
fd.write('%10.2f - %10.2f' %
tuple(gen[i, [QMIN, QMAX]]))
if (gen[i, QG] > gen[i, QMAX] - ctol) | (gen[i, MU_QMAX] >
ptol):
fd.write('%9.3f' % gen[i, MU_QMAX])
else:
fd.write(' - ')
fd.write('\n')
## dispatchable load P constraints
if (OUT_PG_LIM == 2) | (OUT_QG_LIM == 2) | \
((OUT_PG_LIM == 1) & (any(gen[onld, PG] < gen[onld, PMIN] + ctol) |
any(gen[onld, PG] > gen[onld, PMAX] - ctol) |
any(gen[onld, MU_PMIN] > ptol) |
any(gen[onld, MU_PMAX] > ptol))) | \
((OUT_QG_LIM == 1) & (any(gen[onld, QG] < gen[onld, QMIN] + ctol) |
any(gen[onld, QG] > gen[onld, QMAX] - ctol) |
any(gen[onld, MU_QMIN] > ptol) |
any(gen[onld, MU_QMAX] > ptol))):
fd.write(
'\n================================================================================'
)
fd.write(
'\n| Dispatchable Load Constraints |'
)
fd.write(
'\n================================================================================'
)
if (OUT_PG_LIM == 2) | (
(OUT_PG_LIM == 1) &
(any(gen[onld, PG] < gen[onld, PMIN] + ctol)
| any(gen[onld, PG] > gen[onld, PMAX] - ctol) |
any(gen[onld, MU_PMIN] > ptol) | any(gen[onld, MU_PMAX] > ptol))):
fd.write('\nGen Bus Active Power Limits')
fd.write(
'\n # # Pmin mu Pmin Pg Pmax Pmax mu')
fd.write(
'\n--- --- ------- -------- -------- -------- -------')
for k in range(len(onld)):
i = onld[k]
if (OUT_PG_LIM == 2) | ((OUT_PG_LIM == 1) &
((gen[i, PG] < gen[i, PMIN] + ctol) |
(gen[i, PG] > gen[i, PMAX] - ctol) |
(gen[i, MU_PMIN] > ptol) |
(gen[i, MU_PMAX] > ptol))):
fd.write('\n%3d%5d' % (i, gen[i, GEN_BUS]))
if (gen[i, PG] < gen[i, PMIN] + ctol) | (gen[i, MU_PMIN] >
ptol):
fd.write('%8.3f' % gen[i, MU_PMIN])
else:
fd.write(' - ')
if gen[i, PG]:
fd.write('%10.2f%10.2f%10.2f' %
gen[i, [PMIN, PG, PMAX]])
else:
fd.write('%10.2f - %10.2f' %
gen[i, [PMIN, PMAX]])
if (gen[i, PG] > gen[i, PMAX] - ctol) | (gen[i, MU_PMAX] >
ptol):
fd.write('%9.3f' % gen[i, MU_PMAX])
else:
fd.write(' - ')
fd.write('\n')
## dispatchable load Q constraints
if (not isDC) & ((OUT_QG_LIM == 2) |
((OUT_QG_LIM == 1) &
(any(gen[onld, QG] < gen[onld, QMIN] + ctol)
| any(gen[onld, QG] > gen[onld, QMAX] - ctol)
| any(gen[onld, MU_QMIN] > ptol)
| any(gen[onld, MU_QMAX] > ptol)))):
fd.write('\nGen Bus Reactive Power Limits')
fd.write(
'\n # # Qmin mu Qmin Qg Qmax Qmax mu')
fd.write(
'\n--- --- ------- -------- -------- -------- -------')
for k in range(len(onld)):
i = onld[k]
if (OUT_QG_LIM == 2) | ((OUT_QG_LIM == 1) &
((gen[i, QG] < gen[i, QMIN] + ctol) |
(gen[i, QG] > gen[i, QMAX] - ctol) |
(gen[i, MU_QMIN] > ptol) |
(gen[i, MU_QMAX] > ptol))):
fd.write('\n%3d%5d' % (i, gen(i, GEN_BUS)))
if (gen[i, QG] < gen[i, QMIN] + ctol) | (gen[i, MU_QMIN] >
ptol):
fd.write('%8.3f' % gen[i, MU_QMIN])
else:
fd.write(' - ')
if gen[i, QG]:
fd.write('%10.2f%10.2f%10.2f' %
gen[i, [QMIN, QG, QMAX]])
else:
fd.write('%10.2f - %10.2f' %
gen[i, [QMIN, QMAX]])
if (gen[i, QG] > gen[i, QMAX] - ctol) | (gen[i, MU_QMAX] >
ptol):
fd.write('%9.3f' % gen[i, MU_QMAX])
else:
fd.write(' - ')
fd.write('\n')
## line flow constraints
if (ppopt['OPF_FLOW_LIM'] == 1) | isDC: ## P limit
Ff = branch[:, PF]
Ft = branch[:, PT]
strg = '\n # Bus Pf mu Pf |Pmax| Pt Pt mu Bus'
elif ppopt['OPF_FLOW_LIM'] == 2: ## |I| limit
Ff = abs((branch[:, PF] + 1j * branch[:, QF]) /
V[e2i[branch[:, F_BUS].astype(int)]])
Ft = abs((branch[:, PT] + 1j * branch[:, QT]) /
V[e2i[branch[:, T_BUS].astype(int)]])
strg = '\n # Bus |If| mu |If| |Imax| |It| |It| mu Bus'
else: ## |S| limit
Ff = abs(branch[:, PF] + 1j * branch[:, QF])
Ft = abs(branch[:, PT] + 1j * branch[:, QT])
strg = '\n # Bus |Sf| mu |Sf| |Smax| |St| |St| mu Bus'
if (OUT_LINE_LIM == 2) | (
(OUT_LINE_LIM == 1) &
(any((branch[:, RATE_A] != 0) &
(abs(Ff) > branch[:, RATE_A] - ctol)) | any(
(branch[:, RATE_A] != 0) &
(abs(Ft) > branch[:, RATE_A] - ctol))
| any(branch[:, MU_SF] > ptol) | any(branch[:, MU_ST] > ptol))):
fd.write(
'\n================================================================================'
)
fd.write(
'\n| Branch Flow Constraints |'
)
fd.write(
'\n================================================================================'
)
fd.write(
'\nBrnch From "From" End Limit "To" End To'
)
fd.write(strg)
fd.write(
'\n----- ----- ------- -------- -------- -------- ------- -----'
)
for i in range(nl):
if (OUT_LINE_LIM == 2) | ((OUT_LINE_LIM == 1) & (
((branch[i, RATE_A] != 0) &
(abs(Ff[i]) > branch[i, RATE_A] - ctol)) |
((branch[i, RATE_A] != 0) &
(abs(Ft[i]) > branch[i, RATE_A] - ctol)) |
(branch[i, MU_SF] > ptol) | (branch[i, MU_ST] > ptol))):
fd.write('\n%4d%7d' % (i, branch[i, F_BUS]))
if (Ff[i] > branch[i, RATE_A] - ctol) | (branch[i, MU_SF] >
ptol):
fd.write('%10.3f' % branch[i, MU_SF])
else:
fd.write(' - ')
fd.write('%9.2f%10.2f%10.2f' %
(Ff[i], branch[i, RATE_A], Ft[i]))
if (Ft[i] > branch[i, RATE_A] - ctol) | (branch[i, MU_ST] >
ptol):
fd.write('%10.3f' % branch[i, MU_ST])
else:
fd.write(' - ')
fd.write('%6d' % branch[i, T_BUS])
fd.write('\n')
## execute userfcn callbacks for 'printpf' stage
if have_results_struct and 'userfcn' in results:
if not isOPF: ## turn off option for all constraints if it isn't an OPF
ppopt = ppoption(ppopt, 'OUT_ALL_LIM', 0)
run_userfcn(results["userfcn"], 'printpf', results, fd, ppopt)
