Esempio n. 1
0
def _clipRasterLayer(theLayer,
                     theExtent,
                     theCellSize=None,
                     theExtraKeywords=None):
    """Clip a Hazard or Exposure raster layer to the extents provided. The
    layer must be a raster layer or an exception will be thrown.

    .. note:: The extent *must* be in EPSG:4326.

    The output layer will always be in WGS84/Geographic.

    Args:

        * theLayer - a valid QGIS raster layer in EPSG:4326
        * theExtent either: an array representing the exposure layer
           extents in the form [xmin, ymin, xmax, ymax]. It is assumed
           that the coordinates are in EPSG:4326 although currently
           no checks are made to enforce this.
                    or: A QgsGeometry of type polygon. **Polygon clipping is
           currently only supported for vector datasets.**
        * theCellSize - cell size (in GeoCRS) which the layer should
            be resampled to. If not provided for a raster layer (i.e.
            theCellSize=None), the native raster cell size will be used.

    Returns:
        Path to the output clipped layer (placed in the
        system temp dir).

    Raises:
       Exception if input layer is a density layer in projected coordinates -
       see issue #123

    """
    if not theLayer or not theExtent:
        myMessage = tr('Layer or Extent passed to clip is None.')
        raise InvalidParameterError(myMessage)

    if theLayer.type() != QgsMapLayer.RasterLayer:
        myMessage = tr('Expected a raster layer but received a %s.' %
                       str(theLayer.type()))
        raise InvalidParameterError(myMessage)

    myWorkingLayer = str(theLayer.source())

    # Check for existence of keywords file
    myKeywordsPath = myWorkingLayer[:-4] + '.keywords'
    myMessage = tr('Input file to be clipped "%s" does not have the '
                   'expected keywords file %s' %
                   (myWorkingLayer, myKeywordsPath))
    verify(os.path.isfile(myKeywordsPath), myMessage)

    # Raise exception if layer is projected and refers to density (issue #123)
    # FIXME (Ole): Need to deal with it - e.g. by automatically reprojecting
    # the layer at this point and setting the native resolution accordingly
    # in its keywords.
    myKeywords = readKeywordsFromFile(myKeywordsPath)
    if 'datatype' in myKeywords and myKeywords['datatype'] == 'density':
        if str(theLayer.crs().authid()) != 'EPSG:4326':

            # This layer is not WGS84 geographic
            myMessage = ('Layer %s represents density but has spatial '
                         'reference "%s". Density layers must be given in '
                         'WGS84 geographic coordinates, so please reproject '
                         'and try again. For more information, see issue '
                         'https://github.com/AIFDR/inasafe/issues/123' %
                         (myWorkingLayer, theLayer.crs().toProj4()))
            raise InvalidProjectionError(myMessage)

    # We need to provide gdalwarp with a dataset for the clip
    # because unline gdal_translate, it does not take projwin.
    myClipKml = extentToKml(theExtent)

    # Create a filename for the clipped, resampled and reprojected layer
    myHandle, myFilename = tempfile.mkstemp('.tif', 'clip_', temp_dir())
    os.close(myHandle)
    os.remove(myFilename)

    # If no cell size is specified, we need to run gdalwarp without
    # specifying the output pixel size to ensure the raster dims
    # remain consistent.
    myBinaryList = which('gdalwarp')
    LOGGER.debug('Path for gdalwarp: %s' % myBinaryList)
    if len(myBinaryList) < 1:
        raise CallGDALError(tr('gdalwarp could not be found on your computer'))
    # Use the first matching gdalwarp found
    myBinary = myBinaryList[0]
    if theCellSize is None:
        myCommand = ('%s -q -t_srs EPSG:4326 -r near '
                     '-cutline %s -crop_to_cutline -of GTiff '
                     '"%s" "%s"' %
                     (myBinary, myClipKml, myWorkingLayer, myFilename))
    else:
        myCommand = ('%s -q -t_srs EPSG:4326 -r near -tr %f %f '
                     '-cutline %s -crop_to_cutline -of GTiff '
                     '"%s" "%s"' % (myBinary, theCellSize, theCellSize,
                                    myClipKml, myWorkingLayer, myFilename))

    LOGGER.debug(myCommand)
    myResult = QProcess().execute(myCommand)

    # For QProcess exit codes see
    # http://qt-project.org/doc/qt-4.8/qprocess.html#execute
    if myResult == -2:  # cannot be started
        myMessageDetail = tr('Process could not be started.')
        myMessage = tr('<p>Error while executing the following shell command:'
                       '</p><pre>%s</pre><p>Error message: %s' %
                       (myCommand, myMessageDetail))
        raise CallGDALError(myMessage)
    elif myResult == -1:  # process crashed
        myMessageDetail = tr('Process could not be started.')
        myMessage = tr('<p>Error while executing the following shell command:'
                       '</p><pre>%s</pre><p>Error message: %s' %
                       (myCommand, myMessageDetail))
        raise CallGDALError(myMessage)

    # .. todo:: Check the result of the shell call is ok
    myKeywordIO = KeywordIO()
    myKeywordIO.copyKeywords(theLayer,
                             myFilename,
                             theExtraKeywords=theExtraKeywords)
    return myFilename  # Filename of created file
 def testWhich(self):
     """Test that the which command works as expected."""
     myBinary = 'gdalwarp'
     myPath = which(myBinary)
     # Check we found at least one match
     assert len(myPath) > 0
Esempio n. 3
0
def _clipRasterLayer(theLayer, theExtent, theCellSize=None,
                     theExtraKeywords=None):
    """Clip a Hazard or Exposure raster layer to the extents provided. The
    layer must be a raster layer or an exception will be thrown.

    .. note:: The extent *must* be in EPSG:4326.

    The output layer will always be in WGS84/Geographic.

    Args:

        * theLayer - a valid QGIS raster layer in EPSG:4326
        * theExtent either: an array representing the exposure layer
           extents in the form [xmin, ymin, xmax, ymax]. It is assumed
           that the coordinates are in EPSG:4326 although currently
           no checks are made to enforce this.
                    or: A QgsGeometry of type polygon. **Polygon clipping is
           currently only supported for vector datasets.**
        * theCellSize - cell size (in GeoCRS) which the layer should
            be resampled to. If not provided for a raster layer (i.e.
            theCellSize=None), the native raster cell size will be used.

    Returns:
        Path to the output clipped layer (placed in the
        system temp dir).

    Raises:
       Exception if input layer is a density layer in projected coordinates -
       see issue #123

    """
    if not theLayer or not theExtent:
        myMessage = tr('Layer or Extent passed to clip is None.')
        raise InvalidParameterError(myMessage)

    if theLayer.type() != QgsMapLayer.RasterLayer:
        myMessage = tr(
            'Expected a raster layer but received a %s.' %
            str(theLayer.type()))
        raise InvalidParameterError(myMessage)

    myWorkingLayer = str(theLayer.source())

    # Check for existence of keywords file
    myKeywordsPath = myWorkingLayer[:-4] + '.keywords'
    myMessage = tr(
        'Input file to be clipped "%s" does not have the '
        'expected keywords file %s' % (
            myWorkingLayer, myKeywordsPath))
    verify(os.path.isfile(myKeywordsPath), myMessage)

    # Raise exception if layer is projected and refers to density (issue #123)
    # FIXME (Ole): Need to deal with it - e.g. by automatically reprojecting
    # the layer at this point and setting the native resolution accordingly
    # in its keywords.
    myKeywords = readKeywordsFromFile(myKeywordsPath)
    if 'datatype' in myKeywords and myKeywords['datatype'] == 'density':
        if str(theLayer.crs().authid()) != 'EPSG:4326':

            # This layer is not WGS84 geographic
            myMessage = ('Layer %s represents density but has spatial '
                         'reference "%s". Density layers must be given in '
                         'WGS84 geographic coordinates, so please reproject '
                         'and try again. For more information, see issue '
                         'https://github.com/AIFDR/inasafe/issues/123'
                         % (myWorkingLayer, theLayer.crs().toProj4()))
            raise InvalidProjectionError(myMessage)

    # We need to provide gdalwarp with a dataset for the clip
    # because unline gdal_translate, it does not take projwin.
    myClipKml = extentToKml(theExtent)

    # Create a filename for the clipped, resampled and reprojected layer
    myHandle, myFilename = tempfile.mkstemp('.tif', 'clip_',
                                            temp_dir())
    os.close(myHandle)
    os.remove(myFilename)

    # If no cell size is specified, we need to run gdalwarp without
    # specifying the output pixel size to ensure the raster dims
    # remain consistent.
    myBinaryList = which('gdalwarp')
    LOGGER.debug('Path for gdalwarp: %s' % myBinaryList)
    if len(myBinaryList) < 1:
        raise CallGDALError(
            tr('gdalwarp could not be found on your computer'))
    # Use the first matching gdalwarp found
    myBinary = myBinaryList[0]
    if theCellSize is None:
        myCommand = ('%s -q -t_srs EPSG:4326 -r near '
                     '-cutline %s -crop_to_cutline -of GTiff '
                     '"%s" "%s"' % (myBinary,
                                    myClipKml,
                                    myWorkingLayer,
                                    myFilename))
    else:
        myCommand = ('%s -q -t_srs EPSG:4326 -r near -tr %f %f '
                     '-cutline %s -crop_to_cutline -of GTiff '
                     '"%s" "%s"' % (myBinary,
                                    theCellSize,
                                    theCellSize,
                                    myClipKml,
                                    myWorkingLayer,
                                    myFilename))

    LOGGER.debug(myCommand)
    myResult = QProcess().execute(myCommand)

    # For QProcess exit codes see
    # http://qt-project.org/doc/qt-4.8/qprocess.html#execute
    if myResult == -2:  # cannot be started
        myMessageDetail = tr('Process could not be started.')
        myMessage = tr(
            '<p>Error while executing the following shell command:'
            '</p><pre>%s</pre><p>Error message: %s'
            % (myCommand, myMessageDetail))
        raise CallGDALError(myMessage)
    elif myResult == -1:  # process crashed
        myMessageDetail = tr('Process could not be started.')
        myMessage = tr('<p>Error while executing the following shell command:'
                       '</p><pre>%s</pre><p>Error message: %s'
                       % (myCommand, myMessageDetail))
        raise CallGDALError(myMessage)

    # .. todo:: Check the result of the shell call is ok
    myKeywordIO = KeywordIO()
    myKeywordIO.copyKeywords(theLayer, myFilename,
                             theExtraKeywords=theExtraKeywords)
    return myFilename  # Filename of created file
Esempio n. 4
0
 def testWhich(self):
     """Test that the which command works as expected."""
     myBinary = 'gdalwarp'
     myPath = which(myBinary)
     # Check we found at least one match
     assert len(myPath) > 0