def _dequeue():
global status_length
scrollphathd.clear()
logger.info("len(q) = {}".format(len(q)))
status = q.pop()
status_length = scrollphathd.write_string(status, x=18, y=0, font=font5x7smoothed, brightness=0.4) + 17
scrollphathd.show()
time.sleep(0.01)
"""
# Start a timer
threading.Timer(interval, autoscroll, [interval]).start()
# Show the buffer
scrollphathd.show()
# Scroll the buffer content
scrollphathd.scroll()
print("""
Scroll pHAT HD: Hello World
Scrolls "Hello World" across the screen
using the default 5x7 pixel large font.
Press Ctrl+C to exit!
""")
# Uncomment the below if your display is upside down
# (e.g. if you're using it in a Pimoroni Scroll Bot)
#scrollphathd.rotate(degrees=180)
# Write the "Hello World!" string in the buffer and
# set a more eye-friendly default brightness
scrollphathd.write_string(" Hello World!", brightness=0.5)
# Auto scroll using a thread
autoscroll()
GetResponse()
# Convert ticketids array to string and comma separate values
ticketids_string = str(ticketids).strip('[]')
# Convert numberoftickets int to string
numberoftickets_string = str(numberoftickets)
# Combine numberoftickets_string and ticketids_string plus text into output variable
output = ' Tickets: ' + numberoftickets_string + ' IDs: ' + ticketids_string
# Clear the pi output
scrollphathd.clear()
# Watch a queue - if its empty do nothing. If there more than one ticket, output to pi buffer
if numberoftickets > 0:
# Write output string to the pi buffer
scrollphathd.write_string(output, font=font3x5, y=1, brightness=0.5)
#if numberoftickets == 0:
# Saving this section for an action when there are zero ungrabbed crits
# Call the autoscroll function that will send the pi buffer to the led screen, but make sure it only runs once
while scroll_limit < 1:
autoscroll()
scroll_limit += 1
# Sleep for duration of poll_interval to rate limit api access
time.sleep(poll_interval)
def runClock():
while True:
sphd.clear()
# Grab the "seconds" component of the current time
# and convert it to a range from 0.0 to 1.0
float_sec = (time.time() % 60) / 59.0
# Multiply our range by 15 to spread the current
# number of seconds over 15 pixels.
#
# 60 is evenly divisible by 15, so that
# each fully lit pixel represents 4 seconds.
#
# For example this is 28 seconds:
# [x][x][x][x][x][x][x][ ][ ][ ][ ][ ][ ][ ][ ]
# ^ - 0 seconds 59 seconds - ^
seconds_progress = float_sec * 15
if DISPLAY_BAR:
# Step through 15 pixels to draw the seconds bar
for y in range(15):
# For each pixel, we figure out its brightness by
# seeing how much of "seconds_progress" is left to draw
# If it's greater than 1 (full brightness) then we just display 1.
current_pixel = min(seconds_progress, 1)
# Multiply the pixel brightness (0.0 to 1.0) by our global brightness value
sphd.set_pixel(y + 1, 6, current_pixel * BRIGHTNESS)
# Subtract 1 now we've drawn that pixel
seconds_progress -= 1
# If we reach or pass 0, there are no more pixels left to draw
if seconds_progress <= 0:
break
else:
# Just display a simple dot
sphd.set_pixel(int(seconds_progress), 6, BRIGHTNESS)
# Display the time (HH:MM) in a 5x5 pixel font
sphd.write_string(
time.strftime("%H:%M"),
x=0, # Align to the left of the buffer
y=0, # Align to the top of the buffer
font=font5x5, # Use the font5x5 font we imported above
brightness=BRIGHTNESS # Use our global brightness value
)
# int(time.time()) % 2 will tick between 0 and 1 every second.
# We can use this fact to clear the ":" and cause it to blink on/off
# every other second, like a digital clock.
# To do this we clear a rectangle 8 pixels along, 0 down,
# that's 1 pixel wide and 5 pixels tall.
if int(time.time()) % 2 == 0:
sphd.clear_rect(8, 0, 1, 5)
# Display our time and sleep a bit. Using 1 second in time.sleep
# is not recommended, since you might get quite far out of phase
# with the passing of real wall-time seconds and it'll look weird!
#
# 1/10th of a second is accurate enough for a simple clock though :D
sphd.show()
time.sleep(0.1)
import time
from netifaces import ifaddresses
from subprocess import check_output
ipaddr = ifaddresses('wlan0')[2][0]['addr']
scanoutput = check_output(["/sbin/iwlist", "wlan0", "scan"])
#lock onto the strongest source, it should be the power generator.
for line in scanoutput.split():
if line.startswith("ESSID"):
ssid = line.split('"')[1]
break
#string the Wifi SSID name to the wlan's IPAddress
msg = ' ' + ssid + ':' + ipaddr
print msg
#Output that at 1/5th brightness.
sphd.write_string(msg, brightness=0.2)
#scroll this message a couple of times and then stop.
cnt = 0
while cnt < (len(msg) * 10):
sphd.show()
sphd.scroll(1)
time.sleep(0.1)
cnt = cnt + 1
sphd.clear()
# source https://learn.pimoroni.com/tutorial/tanya/santabot-xmas-timer
import datetime
import time
import signal
import scrollphathd
from scrollphathd.fonts import font5x7
# as upside down in scrollbot
scrollphathd.rotate(180)
str_len = 0
scroll_x = 0
while True:
xmas = datetime.datetime(2018, 12, 25) - datetime.datetime.now()
daysleft = xmas.days
hoursleft = xmas.seconds/3600
scrollphathd.set_brightness(0.5)
scrollphathd.clear()
str_len = scrollphathd.write_string("Ho ho ho! It's %i days and %i hours until xmas!" %(daysleft, hoursleft), x=0, y=0, font=font5x7)
scrollphathd.scroll_to(scroll_x, 0)
scrollphathd.show()
time.sleep(0.05)
scroll_x += 1
if scroll_x >= str_len:
scroll_x = 0
def run():
# create a database connection
database = "clockBase.db"
conn = create_connection(database)
cur = conn.cursor()
sql = 'SELECT messageNo, text FROM messages WHERE displayedP = 0;'
showit = True
scrollphathd.clear()
scrollphathd.show()
counter = 1
weatherD = msWeather.combinedReport()
brightNow = brightness(weatherD['sunrise_time'], weatherD['sunset_time'])
while True:
# check db
cur.execute(
"SELECT messageNo,text FROM messages WHERE displayedP = 0;")
rows = cur.fetchall()
# pick a message
if counter < 3:
text = msClock.paddedTime()
counter = counter + 1
showIt = True
# counter = 7 # for debugging
elif counter == 3:
try:
holderD = msWeather.combinedReport()
except:
print('no response from weather server. re-using data.')
holderD = weatherD
weatherD = holderD
text = weatherD['status']
brightNow = brightness(weatherD['sunrise_time'],
weatherD['sunset_time'])
counter = counter + 1
elif 3 < counter <= 5:
text = msClock.paddedTime()
counter = counter + 1
elif counter == 6:
text = 'forecast: ' + weatherD['detailed_status']
counter = counter + 1
elif counter == 7:
cur.execute(sql)
rows = cur.fetchall()
if len(rows) > 0:
text = rows[0][1]
cur.execute(
'''UPDATE messages SET displayTime = ?, displayedP = 1 WHERE messageNo = ?''',
(time.time(), rows[0][0]))
conn.commit()
showIt = True
else:
text = ''
showIt = False
counter = 1
if (showIt):
text = " " + text
if int(args.db) == 1:
debugText = text.encode('ascii', 'ignore').decode('ascii')
print(text)
with open("./debug.txt", "a") as debugFile:
debugFile.write(debugText + '\n')
if (showIt):
textWidth = scrollphathd.write_string(text,
x=0,
y=0,
font=font5x7,
brightness=brightNow)
scrollphathd.show()
for deltaX in range(textWidth):
scrollphathd.scroll(x=1)
scrollphathd.show()
time.sleep(float(args.dt))
scrollphathd.clear()
scrollphathd.show()
time.sleep(float(args.dm))
#Original code by alexellis, updated to run on scroll-phat-hd by alexmburns.
import math
import sys
import time
import scrollphathd
i = 0
buf = [0] * 17
scrollphathd.set_brightness(0.5)
while True:
try:
for x in range(0, 17):
y = (math.sin((i + (x * 10)) / 10.0) + 1) # Produces range from 0 to 2
y *= 2.5 # Scale to 0 to 5
buf[x] = 1 << int(y)
scrollphathd.write_string(buf)
scrollphathd.show()
scrollphathd.scroll()
scrollphathd.clear()
time.sleep(0.005)
i += 1
except KeyboardInterrupt:
scrollphathd.clear()
sys.exit(-1)
def do_test(text):
for bright in [0.1, 0.25, 0.4, 0.55, 0.7]:
scrollphathd.clear()
scrollphathd.write_string(text, font=font5x7, brightness=bright)
scrollphathd.show()
time.sleep(0.75)
#!/usr/bin/env python
import time
import signal
import sys
import scrollphathd
from scrollphathd.fonts import font5x7
for line in sys.stdin:
scrollphathd.clear()
scrollphathd.write_string(line.rstrip(),
x=17,
y=0,
font=font5x7,
brightness=0.3)
buffer_length = scrollphathd.get_buffer_shape()[0]
for i in range(buffer_length + 1):
scrollphathd.show()
scrollphathd.scroll()
time.sleep(0.05)
time.sleep(0.5)
from six import unichr
print("""
Scroll pHAT HD: Hello utf-8
Scrolls the 256 characters Scroll pHAT supports across the screen.
Note: many otherwise useless control characters have been
replaced with symbols you might find useful!
Press Ctrl+C to exit!
""")
# Uncomment to rotate the text
# scrollphathd.rotate(180)
# Set a more eye-friendly default brightness
scrollphathd.set_brightness(0.5)
text = [unichr(x) for x in range(256)]
text = u"{} ".format(u"".join(text))
scrollphathd.write_string(text, x=0, y=0, font=font5x7, brightness=0.5)
while True:
scrollphathd.show()
scrollphathd.scroll()
time.sleep(0.05)
scrollphathd.clear()
if last == 0:
# show startup logo
scrollphathd.clear()
scrollphathd.fill(0, 0, 0, IMAGE_WIDTH, IMAGE_HEIGHT + 14)
image_path = os.path.join(os.path.dirname(__file__), IMAGE_FILE)
image = Image.open(image_path)
pixels = image.load()
for x in range(IMAGE_WIDTH):
for y in range(IMAGE_HEIGHT):
r, g, b = pixels[x, y]
scrollphathd.pixel(x, y + 7, (r / 255) * BRIGHTNESS)
scrollphathd.write_string('%s ' % int(latest), 1, IMAGE_HEIGHT + 8,
font5x5, 1, BRIGHTNESS)
scrollphathd.scroll_to(0, 0)
for i in range(IMAGE_HEIGHT + 8):
scrollphathd.show()
scrollphathd.scroll(0, 1)
time.sleep(0.05)
else:
scrollphathd.fill(0, 0, 0, 50, 14) # a nice big canvas to work with
if latest > last:
scrollphathd.scroll_to(0, 0)
scrollphathd.write_string('%s ' % int(last), 1, 1, font5x5, 1,
BRIGHTNESS)
scrollphathd.write_string('%s ' % int(latest), 1, 8, font5x5, 1,
# Auto scroll using a while + time mechanism (no thread)
eyes = [r, r]
show_eyes()
n = threading.Thread(target=show_eyes_worker)
n.start()
reset = True
val = 0
diff = 10
while True:
global pressed, reset
try:
if reset:
sphd.clear()
sphd.write_string(" I'm Batman! Happy Birthday Alex ",
brightness=0.5)
reset = False
while pressed == False:
# Show the buffer
sphd.show()
# Scroll the buffer content
sphd.scroll()
val += diff
if val > 127:
diff = diff * -1
if val < 0:
val = 0
diff = diff * -1
eyes = [Color(val, val, val), Color(val, val, val)]
def set_test_text():
sphd.rotate(180)
sphd.clear()
sphd.write_string("Test", brightness=0.1)
sphd.show()
time.sleep(1)
import scrollphathd
from scrollphathd.fonts import font3x5, font5x5, font5x7, font5x7smoothed
#possible font3x5, font5x5, font5x7 (default), font5x7smoothed, font5x7unicode
FONT = font5x7
Y_PADDING = 0
if FONT.__name__ == "scrollphathd.fonts.font3x5" or FONT.__name__ == "scrollphathd.fonts.font5x5":
Y_PADDING = 1
if FONT.__name__ == "scrollphathd.fonts.font5x7smoothed":
BRIGHTNESS += 0.2
# Comment the below if your display is upside down
# (e.g. if you're NOT using it in a Pimoroni Scroll Bot)
scrollphathd.rotate(degrees=180)
# Auto scroll using a thread
scrollphathd.write_string(getCryptocurrencies(bases),
y=Y_PADDING,
font=FONT,
brightness=BRIGHTNESS)
event = threading.Event()
autoscroll(event, bases, SCROLL_SPEED)
def signal_term_handler(signal, frame):
print('got SIGTERM')
scrollphathd.clear()
scrollphathd.show()
print("Exiting autoscroll....")
sys.exit(0)
signal.signal(signal.SIGTERM, signal_term_handler)
elif '5x7' in font:
if 'smoothed' in font:
scrollphathd.set_font( font5x7smoothed )
font_width = font5x7smoothed.width
else:
scrollphathd.set_font( font5x7 )
font_width = font5x7.width
if '<text>' in msg:
string = msg[ msg.find('>')+1 : ]
width = len(string) * font_width
scrollphathd.clear()
x = (17/2) - (width/2)
if x < 0:
x = 0
scrollphathd.write_string( string, x=x, y=2, brightness=1.0 )
timeout = time.time() + 1.0
if '<ball>' in msg:
string = msg[ msg.find('>')+1 : ]
scrollphathd.clear()
show_ball = True
scrollphathd.set_font( fontd3 )
scrollphathd.write_string( string, x=10, y=1, brightness=1.0 )
timeout = time.time() + 1.0
perc = (timeout - time.time()) / 1.0
if perc > 0:
if show_ball:
ball_i = int(14.0*(1.0-perc)) % 7
scrollphathd.set_font( fontball )
def wakeUpAlarm(theThing, msg, alarmLink, receiver_email):
print("waking up for:", os.getpid())
##code to start wake up light
GPIO.setmode(GPIO.BCM) #it is the same as pHAT
#vars for button length
deltaTime = 0
startTime = 0
endTime = 0
sleepTime = 0.1
#pin being used
buttonPin = 17 #using gpio pin 17 - physically pin 11
#GPIO code from https://www.youtube.com/watch?v=LEi_dT9KDJI done by BurgZerg Arcade
GPIO.setup(
buttonPin, GPIO.IN,
pull_up_down=GPIO.PUD_UP) #setup pint to check for button push
#wake up light loop
#exit this loop once wake up time is finished or when button is pushed
wakingUp = True
timeCount = 0
levelCount = 1
levelTime = 6 #level time of 6 seconds () makes wake up time 1 minute instead of 30 minutes
while wakingUp:
try:
#increase brightness if the time between levels has passed
if timeCount >= levelTime:
levelCount += 1
timeCount = 0
if levelCount == 11:
wakingUp = False
else:
#set all pixels to current brighness
for r in range(0, 7):
for c in range(0, 17):
sphd.set_pixel(c, r, levelCount * 0.1)
sphd.show()
#increase time spent for this loop
timeCount += 0.1
#button code
if not GPIO.input(
buttonPin
): #the circuit closes so button is being pushed
if startTime == 0: #The button is not already being pressed
startTime = time.time()
else:
if (not startTime == 0
): #Button has been pressed and is now released
endTime = time.time()
deltaTime = endTime - startTime #Time passed during button press
startTime = 0
#check length of button push
if deltaTime < .15: #less than 1 second is accidental push
#do nothing
print("Accidental push")
else:
raise KeyboardInterrupt
time.sleep(sleepTime)
#check if the button has been pushed to skip the rest of wakeup
except KeyboardInterrupt: #if the button has been pressed skip to message
wakingUp = False
##end of wake up light code
sphd.clear()
sphd.show()
#start music and show message
#music
url = alarmLink
video = pafy.new(url)
best = video.getbest()
playurl = best.url
media = vlc.MediaPlayer(playurl)
media.play()
sphd.write_string(msg + " ")
print(msg)
#continously show message
sphd.set_brightness(0.2)
cont = True
while cont:
try:
sphd.show()
sphd.scroll(1)
#button code
if not GPIO.input(
buttonPin
): #the circuit closes so button is being pushed
if startTime == 0: #The button is not already being pressed
startTime = time.time()
else:
if (not startTime == 0
): #Button has been pressed and is now released
endTime = time.time()
deltaTime = endTime - startTime #Time passed during button press
startTime = 0
#check length of button push
if deltaTime < .15: #less than 1 second is accidental push
#do nothing
print("Accidental push")
else:
raise KeyboardInterrupt
time.sleep(sleepTime)
except KeyboardInterrupt:
cont = False
#stop music
media.stop()
#clear led board
sphd.clear()
sphd.show()
GPIO.cleanup()
#send email to user if one was given
if receiver_email != 'none':
smtp_server = "smtp.gmail.com"
port = 587 # For starttls
sender_email = "*****@*****.**"
password = "******"
# Create a secure SSL context
context = ssl.create_default_context()
# Try to log in to server and send email
try:
server = smtplib.SMTP(smtp_server, port)
server.ehlo() # Can be omitted
server.starttls(context=context) # Secure the connection
server.ehlo() # Can be omitted
server.login(sender_email, password)
#message that tells user the person woke up
message = MIMEMultipart("alternative")
message["Subject"] = "The Pi woke them up at " + str(
datetime.datetime.now().time())
message["From"] = sender_email
message["To"] = receiver_email
msgText = """\
They should feel well rested now thanks to the song and time you chose"""
messageBody = MIMEText(msgText, "plain")
message.attach(messageBody)
server.sendmail(sender_email, receiver_email,
message.as_string())
except Exception as e:
# Print any error messages to stdout
print(e)
finally:
server.quit()
# check it works - light every pixel
for x in range(17):
for y in range(7):
sphd.set_pixel(x, y, 0.25)
sphd.show()
time.sleep(0.5)
sphd.clear()
sphd.show()
# read string from website
link = "https://raw.githubusercontent.com/iain-t-bennett/scrollbot/master/example3.msg"
f = requests.get(link)
msg = f.text
# add blank space so no immediate repeat
msg = msg + ' '
sphd.write_string(msg)
sphd.set_brightness(0.25)
# assume 4 pixels per char then add 17 for width of display
while True:
# assume 4 pixels per char then add 17 for width of display
for x in range(len(msg) * 4 + 17):
sphd.show()
sphd.scroll(1)
time.sleep(0.05)
# end of script
def clock():
scrollphathd.clear()
scrollphathd.write_string(time.strftime("%H:%M"), x=0, y=1, font=font3x5, letter_spacing=1, brightness=BRIGHTNESS)
scrollphathd.show()
import scrollphathd
from scrollphathd.fonts import font5x7
print("""
Scroll pHAT HD: Hello World
Scrolls "Hello World" across the screen
in a 5x7 pixel large font.
Press Ctrl+C to exit!
""")
#Uncomment to rotate the text
#scrollphathd.rotate(180)
#Set a more eye-friendly default brightness
scrollphathd.set_brightness(0.1)
scrollphathd.write_string("Hello World! ",
x=0,
y=0,
font=font5x7,
brightness=0.5)
while True:
scrollphathd.show()
scrollphathd.scroll()
time.sleep(0.05)
def date():
scrollphathd.clear()
scrollphathd.write_string(time.strftime("%d"), x=0, y=1, font=font3x5, letter_spacing=1, brightness=BRIGHTNESS)
scrollphathd.fill(BRIGHTNESS, x=8, y=0, width=1, height=7)
scrollphathd.write_string(time.strftime("%m"), x=10, y=1, font=font3x5, letter_spacing=1, brightness=BRIGHTNESS)
scrollphathd.show()
# Subtract 1 now we've drawn that pixel
seconds_progress -= 1
# If we reach or pass 0, there are no more pixels left to draw
if seconds_progress <= 0:
break
else:
# Just display a simple dot
scrollphathd.set_pixel(int(seconds_progress), 6, BRIGHTNESS)
# Display the time (HH:MM) in a 5x5 pixel font
scrollphathd.write_string(
time.strftime("%H:%M"),
x=0, # Align to the left of the buffer
y=0, # Align to the top of the buffer
font=font5x5, # Use the font5x5 font we imported above
brightness=BRIGHTNESS # Use our global brightness value
)
# int(time.time()) % 2 will tick between 0 and 1 every second.
# We can use this fact to clear the ":" and cause it to blink on/off
# every other second, like a digital clock.
# To do this we clear a rectangle 8 pixels along, 0 down,
# that's 1 pixel wide and 5 pixels tall.
if int(time.time()) % 2 == 0:
scrollphathd.clear_rect(8, 0, 1, 5)
# Display our time and sleep a bit. Using 1 second in time.sleep
# is not recommended, since you might get quite far out of phase
# with the passing of real wall-time seconds and it'll look weird!
#prints the contents of test.txt into Scroll pHat HD, remember to change directory to be valid.
import signal
import time
import scrollphathd
print("""
This should be reading your .txt file
Press Ctrl+C to exit!
""")
# Uncomment the below if your display is upside down
#scrollphathd.rotate(degrees=180)
scrollphathd.write_string(' ' + ''.join(file('/home/pi/test.txt')),
brightness=0.5)
# Auto scroll using a while + time mechanism (no thread)
while True:
# Show the buffer
scrollphathd.show()
# Scroll the buffer content
scrollphathd.scroll()
# Wait for 0.1s
time.sleep(0.1)
lines = [
"In the old #BILGETANK we'll keep you in the know",
"In the old #BILGETANK we'll fix your techie woes",
"And we'll make things", "And we'll break things",
"'til we're altogether aching",
"Then we'll grab a cup of grog down in the old #BILGETANK"
]
lengths = [0] * len(lines)
offset_left = 0
for line, text in enumerate(lines):
lengths[line] = scrollphathd.write_string(text,
x=offset_left,
y=line_height * line)
offset_left += lengths[line]
scrollphathd.set_pixel(0, (len(lines) * line_height) - 1, 0)
current_line = 0
scrollphathd.show()
while True:
pos_x = 0
pos_y = 0
for current_line in range(len(lines)):
time.sleep(delay * 10)
for y in range(lengths[current_line]):
def show_string(self, this_program, text):
scrollphathd.write_string(text, brightness=BRIGHTNESS)
while self.program == this_program and not self._got_stop_event():
scrollphathd.show()
scrollphathd.scroll()
time.sleep(SCROLL_TEXT_RATE_MS / 1000)
Press Ctrl+C to exit!
""")
# Uncomment the below if your display is upside down
# (e.g. if you're using it in a Pimoroni Scroll Bot)
scrollphathd.rotate(degrees=180)
# Set a more eye-friendly default brightness
scrollphathd.set_brightness(0.5)
# Write the string to scroll
scrollphathd.write_string(" Hello World! ",
x=0,
y=1,
font=font3x5,
brightness=1.0)
def draw_static_elements(buf):
# Buf is given as a two dimensional array of elements buf[x][y]
# This method will blink a frame of alternating lights around
# our scrolling text twice a second.
if int(time.time() * 2) % 2 == 0:
for x in range(scrollphathd.DISPLAY_WIDTH):
if x % 2 == 0:
buf[x][0] = 1.0
buf[x][scrollphathd.DISPLAY_HEIGHT - 1] = 1.0
#scrollphathd.rotate(180)
while True:
string = ''
pos = 0
for currency in currencies:
url = 'https://www.bitstamp.net/api/v2/ticker/%s/' % currency
#print(url)
data = json.load(urllib.urlopen(url))
print(data)
string += '%s ' % symbol[pos]
string += u'$%s' % data['last'] + ' '
pos += 1
for i in range(3):
scrollphathd.clear()
#print(string)
buffer = scrollphathd.write_string(string,
x=17,
y=0,
font=font5x5,
brightness=0.2)
for c in range(buffer):
scrollphathd.show()
scrollphathd.scroll(1)
time.sleep(0.05)
sleep(20)
def run():
start = 0
end = 0
countdown_running = False
finish_countdown = False
while True:
# Check if there's any HTTP actions
if (api_queue.qsize() > 0):
action = api_queue.get(block=True)
print(action.action_type)
if action.action_type == "start":
cleanup()
# Uncomment the below if your display is upside down
# (e.g. if you're using it in a Pimoroni Scroll Bot)
scrollphathd.rotate(degrees=180)
start = time.time()
end = start + 1 + 10 #25 * 60
countdown_running = True
finish_countdown = False
if action.action_type == "clear":
cleanup()
countdown_running = False
finish_countdown = False
if action.action_type == "stop":
countdown_running = False
finish_countdown = False
if countdown_running:
if end > time.time():
now = time.time()
delta_t = end - now
secs = int(delta_t)
text = datetime.fromtimestamp(delta_t).strftime("%M:%S")
scrollphathd.clear()
# Display the time (HH:MM) in a 5x5 pixel font
scrollphathd.write_string(
text,
x=0, # Align to the left of the buffer
y=0, # Align to the top of the buffer
font=font5x5, # Use the font5x5 font we imported above
brightness=BRIGHTNESS # Use our global brightness value
)
# int(time.time()) % 2 will tick between 0 and 1 every second.
# We can use this fact to clear the ":" and cause it to blink on/off
# every other second, like a digital clock.
# To do this we clear a rectangle 8 pixels along, 0 down,
# that's 1 pixel wide and 5 pixels tall.
if int(time.time()) % 2 == 0:
scrollphathd.clear_rect(8, 0, 1, 5)
else:
print("Finished countdown")
countdown_running = False
finish_countdown = True
scrollphathd.clear()
scrollphathd.write_string(
"Time's up! ",
x=0, # Align to the left of the buffer
y=0, # Align to the top of the buffer
font=font5x7, # Use the font5x5 font we imported above
brightness=BRIGHTNESS # Use our global brightness value
)
if finish_countdown:
scrollphathd.scroll()
# Display our time and sleep a bit. Using 1 second in time.sleep
# is not recommended, since you might get quite far out of phase
# with the passing of real wall-time seconds and it'll look weird!
#
# 1/10th of a second is accurate enough for a simple clock though :D
scrollphathd.show()
time.sleep(0.1)
# this response also contains rich geo-location data
ip = json_data['ip']
return ip
def get_ip(mode):
return get_public_ip() if mode == "public" else get_internal_ip()
# return mode == "public" ? get_public_ip() : get_internal_ip()
address_mode = "public"
if(len(sys.argv) == 2):
address_mode = sys.argv[1]
ip = get_ip(address_mode)
print(address_mode + " IP Address: " +str(ip))
scrollphathd.set_brightness(0.5)
scrollphathd.write_string(" IP: " + str(ip) + " ")
while True:
try:
scrollphathd.show()
scrollphathd.scroll()
time.sleep(0.05)
except KeyboardInterrupt:
scrollphathd.clear()
sys.exit(-1)
import scrollphathd as sphd
import time
import requests
sphd.rotate(180)
while True:
try:
resp = requests.post('http://localhost:3000/minutes')
minutes = resp.content.decode('utf-8') + 'm'
except:
minutes = 'Nanm'
print(minutes)
sphd.clear()
sphd.write_string(minutes, brightness=0.8)
sphd.show()
time.sleep(5)
import scrollphathd as sphd
from scrollphathd.fonts import font5x7
import time
sphd.set_brightness(0.5)
sphd.rotate(degrees=180)
sphd.write_string('Shiver me timbers!', font=font5x7)
while True:
sphd.show()
sphd.scroll(1)
time.sleep(0.1)
