def main():
"""main part"""
if this_PI not in PIs:
Log("wrong host!")
shutdown_application()
udp = UDP_Sender()
htu21df = HTU21DF()
tempds = DS1820(AddressesDS1820[this_PI])
tempcpu = CPU()
if this_PI == pik_i:
bmp180 = BMP180()
pressure = 1013.25 # in case of no BMP180 available
while True:
temp_ds = tempds.read_temperature()
temp_cpu = tempcpu.read_temperature()
temp_htu = htu21df.read_temperature()
humi_htu = htu21df.read_humidity()
if this_PI == pik_i:
pressure = bmp180.read_pressure() / 100.0
rrd_data = "N:{:.2f}".format(temp_ds) + \
":{:.2f}".format(temp_htu) + \
":{:.2f}".format(temp_cpu) + \
":{:.2f}".format(humi_htu) + \
":{:.2f}".format(pressure)
udp.send("{},{}".format(this_PI, rrd_data))
time.sleep(45)
def main():
cpu = CPU()
htu21df = HTU21DF(qvalue_temp=qv_temp_wardrobe,
qvalue_humi=qv_humi_wardrobe)
udp = UDP_Sender()
lightness.start()
forecast.start()
for c in controls.values():
c.start()
while True:
with central_i2c_lock:
htu21df_temperature = htu21df.read_temperature()
htu21df_humidity = htu21df.read_humidity()
rrd_data = "N:{:.2f}".format(htu21df_temperature) + \
":{:.2f}".format(cpu.read_temperature()) + \
":{:.2f}".format(99.99) + \
":{:.2f}".format(htu21df_humidity) + \
":{:.2f}".format(lightness.value) + \
":{}".format(controls['doors'].switchvalue_stretched()) + \
":{}".format(0) + \
":{}".format(controls['drawer'].switchvalue_stretched()) + \
":{}".format(0)
udp.send(rrd_data)
sleep(50)
def __init__(self):
threading.Thread.__init__(self)
self.values = {
'temp': "n/a",
'tempcpu': "n/a",
'humi': "n/a",
'airpressure': "n/a",
'lightness': "n/a",
'airquality': "n/a"
}
self.qv_temp = SensorValue("ID_40", "TempKueche",
SensorValue_Data.Types.Temp, "°C")
self.qv_humi = SensorValue("ID_41", "HumiKueche",
SensorValue_Data.Types.Humi, "% rF")
self.qv_pressure = SensorValue("ID_42", "PressureKueche",
SensorValue_Data.Types.Pressure, "hPa")
self.qv_light = SensorValue("ID_43", "LightKueche",
SensorValue_Data.Types.Light, "lux")
self.qv_airquality = SensorValue("ID_44", "AirQualityKueche",
SensorValue_Data.Types.AirQuality,
"%")
self.sq = SensorQueueClient_write("../../../configs/weatherqueue.ini")
self.sq.register(self.qv_temp)
self.sq.register(self.qv_humi)
self.sq.register(self.qv_pressure)
self.sq.register(self.qv_light)
self.sq.register(self.qv_airquality)
self.cpu = CPU()
self.bme680 = BME680(i2c_addr=BME_680_BASEADDR, \
qv_temp=self.qv_temp, qv_humi=self.qv_humi, \
qv_pressure=self.qv_pressure, qv_airquality=self.qv_airquality)
self.tsl2561 = TSL2561(qvalue=self.qv_light)
self.rrd_template = DS_TEMP + ":" + \
DS_TEMPCPU + ":" + \
DS_HUMI + ":" + \
DS_AIRPRESSURE + ":" + \
DS_LIGHTNESS + ":" + \
DS_AIRQUALITY + ":" + \
DS_OPEN1 + ":" + \
DS_OPEN2 + ":" + \
DS_OPEN3 + ":" + \
DS_OPEN4
self._running = True
class Statistics(threading.Thread):
cpu = CPU()
def __init__(self):
threading.Thread.__init__(self)
self.udp = Sender()
def run(self):
self._running = True
while self._running:
rrd_data = "N:{}".format(relais.status_stretchon().value) + \
":{:.2f}".format(self.cpu.read_temperature()) + \
":{}".format(0.0) + \
":{}".format(0.0) + \
":{}".format(0.0) + \
":{}".format(0.0) + \
":{}".format(0.0)
Log(rrd_data, True)
self.udp.send(rrd_data)
for _ in range(500): # interruptible sleep
if self._running:
sleep(0.1)
else:
break
def stop(self):
self._running = False
def Sensor ():
"""reads data from sensor"""
htu21df = HTU21DF()
cpu = CPU()
udp = UDP.Sender(CREDENTIALS)
while True:
temperature = htu21df.read_temperature()
humidity = htu21df.read_humidity()
cpu_temp = cpu.read_temperature()
rrd_data = "N:" + \
":".join(f"{d:.2f}" for d in [temperature, \
humidity, \
cpu_temp])
udp.send(rrd_data)
time.sleep(50)
def Sensor ():
"""reads data from sensor"""
if this_PI not in PIs:
Log("wrong host!")
global shutdown_application
shutdown_application()
tempds = DS1820(AddressesDS1820[this_PI])
tempcpu = CPU()
if this_PI == pik_i:
bme680 = BME680(i2c_addr=BME_680_SECONDARYADDR)
else:
htu21df = HTU21DF()
udp_rrd = UDP.Sender(CREDENTIALS_RRD) # Server for all rrd stuff
udp_ha = UDP.Sender(CREDENTIALS_HA) # Display at home ("Homeautomation")
pressure = 1013.25 # in case of no BME680 available
airquality = 0
while True:
temp_ds = tempds.read_temperature()
temp_cpu = tempcpu.read_temperature()
if this_PI == pik_i:
bme680.get_sensor_data()
temp = bme680.data.temperature
humi = bme680.data.humidity
pressure = bme680.data.pressure
airquality = bme680.data.air_quality_score \
if bme680.data.air_quality_score != None else 0
else:
temp = htu21df.read_temperature()
humi = htu21df.read_humidity()
rrd_data = "N:{:.2f}".format(temp_ds) + \
":{:.2f}".format(temp) + \
":{:.2f}".format(temp_cpu) + \
":{:.2f}".format(humi) + \
":{:.2f}".format(pressure) + \
":{:.2f}".format(airquality)
udp_rrd.send(f"{this_PI},{rrd_data}")
udp_ha.send(f"{this_PI},{rrd_data}")
time.sleep(45)
def __init__(self, data, update_display):
threading.Thread.__init__(self)
self.cpu = CPU()
self.ds1820_outdoor = DS1820(
"/sys/bus/w1/devices/28-0000085607ec/w1_slave")
self.ds1820_room = DS1820(
"/sys/bus/w1/devices/28-000008561957/w1_slave")
self.ds1820_water = DS1820(
"/sys/bus/w1/devices/28-030c979462a8/w1_slave")
self.bme280_box = BME280()
self.sht31_airin = SHT31(addr=SHT31_BASEADDR)
self.sht31_airout = SHT31(addr=SHT31_SECONDARYADDR)
self.pcf8591 = PCF8591()
self.__data = data
self.update_display = update_display
self._running = True
def Sensor():
""" reads data from sensor(s). """
qv_temp = SensorValue("ID_03", "TempOutdoor", SensorValue_Data.Types.Temp,
"°C")
qv_temp_garden = SensorValue("ID_12", "TempOutdoorGarden",
SensorValue_Data.Types.Temp, "°C")
qv_humi = SensorValue("ID_04", "HumiOutdoor", SensorValue_Data.Types.Humi,
"% rF")
qv_lightness = SensorValue("ID_15", "LightnessOutdoor",
SensorValue_Data.Types.Light, "lux")
sq.register(qv_temp)
sq.register(qv_temp_garden)
sq.register(qv_humi)
sq.register(qv_lightness)
bme280 = BME280(qvalue_pressure=None, \
qvalue_temp=qv_temp, \
qvalue_humi=qv_humi)
ds1820 = DS1820("/sys/bus/w1/devices/28-000006d62eb1/w1_slave",
qv_temp_garden)
tsl2561 = TSL2561(qvalue=qv_lightness)
cpu = CPU()
udp = UDP.Sender(CREDENTIALS)
while True:
temp = bme280.read_temperature()
temp_garden = ds1820.read_temperature()
humi = bme280.read_humidity()
pressure = bme280.read_pressure() / 100.0
lightness = tsl2561.lux()
cpu_temp = cpu.read_temperature()
rrd_data = "N:" + \
":".join(f"{d:.2f}" for d in [temp, \
temp_garden, \
humi, \
pressure, \
lightness, \
cpu_temp])
udp.send(rrd_data)
time.sleep(50)
def Sensor():
"""reads data from sensor"""
qv_temp = SensorValue("ID_01", "TempWohnzimmerIndoor",
SensorValue_Data.Types.Temp, "°C")
qv_humi = SensorValue("ID_02", "HumiWohnzimmerIndoor",
SensorValue_Data.Types.Humi, "% rF")
qv_pressure = SensorValue("ID_05", "Luftdruck",
SensorValue_Data.Types.Pressure, "hPa")
qv_airquality = SensorValue("ID_14", "AirQualityWohnzimmer",
SensorValue_Data.Types.AirQuality, "%")
sq.register(qv_temp)
sq.register(qv_humi)
sq.register(qv_pressure)
sq.register(qv_airquality)
bme680 = BME680(i2c_addr=BME_680_BASEADDR, \
qv_temp=qv_temp, qv_humi=qv_humi, \
qv_pressure=qv_pressure, qv_airquality=qv_airquality)
cpu = CPU()
udp = UDP.Sender(CREDENTIALS)
while True:
bme680.get_sensor_data()
temp = bme680.data.temperature
humi = bme680.data.humidity
pressure = bme680.data.pressure
airquality = bme680.data.air_quality_score \
if bme680.data.air_quality_score != None else 0
cpu_temp = cpu.read_temperature()
rrd_data = "N:" + \
":".join(f"{d:.2f}" for d in [temp, \
humi, \
pressure, \
airquality, \
cpu_temp])
udp.send(rrd_data)
time.sleep(50)
class Sensors(threading.Thread):
def __init__(self, data, update_display):
threading.Thread.__init__(self)
self.cpu = CPU()
self.ds1820_outdoor = DS1820(
"/sys/bus/w1/devices/28-0000085607ec/w1_slave")
self.ds1820_room = DS1820(
"/sys/bus/w1/devices/28-000008561957/w1_slave")
self.ds1820_water = DS1820(
"/sys/bus/w1/devices/28-030c979462a8/w1_slave")
self.bme280_box = BME280()
self.sht31_airin = SHT31(addr=SHT31_BASEADDR)
self.sht31_airout = SHT31(addr=SHT31_SECONDARYADDR)
self.pcf8591 = PCF8591()
self.__data = data
self.update_display = update_display
self._running = True
def run(self):
while self._running:
self.__data.cpu = self.cpu.read_temperature()
self.__data.box_temp = self.bme280_box.read_temperature()
self.__data.box_humidity = self.bme280_box.read_humidity()
self.__data.airin_temp = self.sht31_airin.read_temperature()
self.__data.airin_humidity = self.sht31_airin.read_humidity()
self.__data.airout_temp = self.sht31_airout.read_temperature()
self.__data.airout_humidity = self.sht31_airout.read_humidity()
self.__data.engine_circulation = self.pcf8591.read(channel=0)
self.__data.engine_countercurrent = self.pcf8591.read(channel=1)
self.__data.outdoor_temp = self.ds1820_outdoor.read_temperature()
self.__data.room_temp = self.ds1820_room.read_temperature()
self.__data.water_temp = self.ds1820_water.read_temperature()
self.__data.box_abs_humidity = abs_humidity(
self.__data.box_humidity, self.__data.box_temp)
self.__data.airin_abs_humidity = abs_humidity(
self.__data.airin_humidity, self.__data.airin_temp)
self.__data.airout_abs_humidity = abs_humidity(
self.__data.airout_humidity, self.__data.airout_temp)
self.__data.valid = True
# Log("\n{}".format(self.__data))
self.update_display()
for _ in range(600): # interruptible sleep
if not self._running:
break
time.sleep(0.1)
def stop(self):
self._running = False
def __init__(self):
threading.Thread.__init__(self)
self.values = {
'temp': "n/a",
'tempcpu': "n/a",
'humi': "n/a",
'airpressure': "n/a",
'lightness': "n/a",
'airquality': "n/a"
}
self.qv_temp = SensorValue("ID_40", "TempKueche",
SensorValue_Data.Types.Temp, "°C")
self.qv_humi = SensorValue("ID_41", "HumiKueche",
SensorValue_Data.Types.Humi, "% rF")
self.qv_pressure = SensorValue("ID_42", "PressureKueche",
SensorValue_Data.Types.Pressure, "hPa")
self.qv_light = SensorValue("ID_43", "LightKueche",
SensorValue_Data.Types.Light, "lux")
self.qv_airquality = SensorValue("ID_44", "AirQualityKueche",
SensorValue_Data.Types.AirQuality,
"%")
self.sq = SensorQueueClient_write("../../../configs/weatherqueue.ini")
self.sq.register(self.qv_temp)
self.sq.register(self.qv_humi)
self.sq.register(self.qv_pressure)
self.sq.register(self.qv_light)
self.sq.register(self.qv_airquality)
self.cpu = CPU()
self.bme680 = BME680(i2c_addr=BME_680_BASEADDR, \
qv_temp=self.qv_temp, qv_humi=self.qv_humi, \
qv_pressure=self.qv_pressure, qv_airquality=self.qv_airquality)
self.tsl2561 = TSL2561(qvalue=self.qv_light)
self.udp = UDP.Sender(CREDENTIALS)
def main ():
cpu = CPU()
htu21df = HTU21DF(qvalue_temp=qv_temp_wardrobe, qvalue_humi=qv_humi_wardrobe)
lightness.start()
forecast.start()
for c in controls.values():
c.start()
rrd_template = DS_TEMP1 + ":" + \
DS_TEMPCPU + ":" + \
DS_TEMP2 + ":" + \
DS_HUMI + ":" + \
DS_LIGHTNESS + ":" + \
DS_OPEN1 + ":" + \
DS_OPEN2 + ":" + \
DS_OPEN3 + ":" + \
DS_OPEN4
while True:
with central_i2c_lock:
htu21df_temperature = htu21df.read_temperature()
htu21df_humidity = htu21df.read_humidity()
rrd_data = "N:{:.2f}".format(htu21df_temperature) + \
":{:.2f}".format(cpu.read_temperature()) + \
":{:.2f}".format(99.99) + \
":{:.2f}".format(htu21df_humidity) + \
":{:.2f}".format(lightness.value) + \
":{}".format(controls['doors'].switchvalue_stretched()) + \
":{}".format(0) + \
":{}".format(controls['drawer'].switchvalue_stretched()) + \
":{}".format(0)
Log(rrd_data)
rrdtool.update(RRDFILE, "--template", rrd_template, rrd_data)
sleep(50)
class Sensors(object):
v_ref = 8.77
def __init__(self):
self.cpu = CPU()
self.bmp180 = BMP180() # air pressure, temperature
self.ds1820 = DS1820("/sys/bus/w1/devices/28-00000855fdfe/w1_slave")
self.pcf8591 = PCF8591() # ADC for measurement of supply voltage
def read(self):
timestamp = time.time()
return {
V_TemperatureBox: self.bmp180.read_temperature(),
V_TemperatureOutside: self.ds1820.read_temperature(),
V_Pressure: self.bmp180.read_pressure(),
V_Voltage: self.pcf8591.read(channel=0) / 255.0 * self.v_ref,
V_TemperatureCPU: self.cpu.read_temperature(),
V_Timestamp: timestamp,
V_Time: time.strftime("%X", time.localtime(timestamp))
}
class Statistics(threading.Thread):
rrd_template = DS_SWITCH + ":" + \
DS_TEMPCPU + ":" + \
DS_TEMP + ":" + \
DS_HUMI + ":" + \
DS_RES1 + ":" + \
DS_RES2 + ":" + \
DS_RES3
cpu = CPU()
def __init__(self):
threading.Thread.__init__(self)
self._running = True
def run(self):
while self._running:
rrd_data = "N:{}".format(relais.status_stretchon().value) + \
":{:.2f}".format(self.cpu.read_temperature()) + \
":{}".format(0.0) + \
":{}".format(0.0) + \
":{}".format(0.0) + \
":{}".format(0.0) + \
":{}".format(0.0)
Log(rrd_data, True)
try:
rrdtool.update(RRDFILE, "--template", self.rrd_template,
rrd_data)
except rrdtool.OperationalError:
Log("Cannot write to rrd: {0[0]} {0[1]}".format(
sys.exc_info()))
for _ in range(500): # interruptible sleep
if self._running:
sleep(0.1)
else:
break
def stop(self):
self._running = False
###############################################################################
## Shutdown stuff #############################################################
def shutdown_application():
"""cleanup stuff"""
Log("Stopping application")
Log("Application stopped")
sys.exit(0)
###############################################################################
## main #######################################################################
if __name__ == "__main__":
shutdown_application = Shutdown(shutdown_func=shutdown_application)
cpu = CPU()
udp = UDP_Sender()
if this_PI == seti_01:
ds_room = DS1820(DS1820_Room)
ds_airflow = DS1820(DS1820_Airflow)
htu = HTU21DF()
display = Display()
temp_room = -99.99 # in case no DS1820 available
temp_airflow = -99.99
humidity = -99.99 # in case no HTU21DF available
while True:
cpu_usage = psutil.cpu_percent(percpu=True)
def __init__(self):
self.cpu = CPU()
self.bmp180 = BMP180() # air pressure, temperature
self.ds1820 = DS1820("/sys/bus/w1/devices/28-00000855fdfe/w1_slave")
self.pcf8591 = PCF8591() # ADC for measurement of supply voltage
#!/usr/bin/python3
# -*- coding: utf-8 -*-
import sys
sys.path.append('../libs')
from sensors.CPU import CPU
cpu = CPU()
print(cpu.read_temperature())
### eof ###
class Sensors(threading.Thread, metaclass=Singleton):
def __init__(self):
threading.Thread.__init__(self)
self.values = {
'temp': "n/a",
'tempcpu': "n/a",
'humi': "n/a",
'airpressure': "n/a",
'lightness': "n/a",
'airquality': "n/a"
}
self.qv_temp = SensorValue("ID_40", "TempKueche",
SensorValue_Data.Types.Temp, "°C")
self.qv_humi = SensorValue("ID_41", "HumiKueche",
SensorValue_Data.Types.Humi, "% rF")
self.qv_pressure = SensorValue("ID_42", "PressureKueche",
SensorValue_Data.Types.Pressure, "hPa")
self.qv_light = SensorValue("ID_43", "LightKueche",
SensorValue_Data.Types.Light, "lux")
self.qv_airquality = SensorValue("ID_44", "AirQualityKueche",
SensorValue_Data.Types.AirQuality,
"%")
self.sq = SensorQueueClient_write("../../../configs/weatherqueue.ini")
self.sq.register(self.qv_temp)
self.sq.register(self.qv_humi)
self.sq.register(self.qv_pressure)
self.sq.register(self.qv_light)
self.sq.register(self.qv_airquality)
self.cpu = CPU()
self.bme680 = BME680(i2c_addr=BME_680_BASEADDR, \
qv_temp=self.qv_temp, qv_humi=self.qv_humi, \
qv_pressure=self.qv_pressure, qv_airquality=self.qv_airquality)
self.tsl2561 = TSL2561(qvalue=self.qv_light)
self.udp = UDP.Sender(CREDENTIALS)
def run(self):
self._running = True
while self._running:
self.bme680.get_sensor_data()
self.values['temp'] = self.bme680.data.temperature
self.values['tempcpu'] = self.cpu.read_temperature()
self.values['humi'] = self.bme680.data.humidity
self.values['airpressure'] = self.bme680.data.pressure
self.values['lightness'] = self.tsl2561.lux()
self.values['airquality'] = self.bme680.data.air_quality_score \
if self.bme680.data.air_quality_score != None else 0
rrd_data = "N:{:.2f}".format(self.values['temp']) + \
":{:.2f}".format(self.values['tempcpu']) + \
":{:.2f}".format(self.values['humi']) + \
":{:.2f}".format(self.values['airpressure']) + \
":{:.2f}".format(self.values['lightness']) + \
":{:.2f}".format(self.values['airquality']) + \
":{}".format(0) + \
":{}".format(0) + \
":{}".format(0) + \
":{}".format(0)
self.udp.send(rrd_data)
for _ in range(50): # interruptible sleep
if self._running:
time.sleep(1)
# brightness control needs higher frequency
self.values['lightness'] = self.tsl2561.lux()
else:
break
def stop(self):
self._running = False