def processAlgorithm(self, progress):
#TODO:check correct num of bands
input = self.getParameterValue(SplitRGBBands.INPUT)
temp = SextanteUtils.getTempFilename(None).replace('.','');
basename = os.path.basename(temp)
validChars = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789"
safeBasename = ''.join(c for c in basename if c in validChars)
temp = os.path.join(os.path.dirname(temp), safeBasename)
r = self.getOutputValue(SplitRGBBands.R)
g = self.getOutputValue(SplitRGBBands.G)
b = self.getOutputValue(SplitRGBBands.B)
commands = []
if SextanteUtils.isWindows():
commands.append("io_gdal 0 -GRIDS \"" + temp + "\" -FILES \"" + input+"\"")
commands.append("io_gdal 1 -GRIDS \"" + temp + "_0001.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + r + "\"");
commands.append("io_gdal 1 -GRIDS \"" + temp + "_0002.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + g + "\"");
commands.append("io_gdal 1 -GRIDS \"" + temp + "_0003.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + b + "\"");
else:
commands.append("libio_gdal 0 -GRIDS \"" + temp + "\" -FILES \"" + input + "\"")
commands.append("libio_gdal 1 -GRIDS \"" + temp + "_0001.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + r + "\"");
commands.append("libio_gdal 1 -GRIDS \"" + temp + "_0002.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + g + "\"");
commands.append("libio_gdal 1 -GRIDS \"" + temp + "_0003.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + b + "\"");
SagaUtils.createSagaBatchJobFileFromSagaCommands(commands)
SagaUtils.executeSaga(progress);
def processAlgorithm(self, progress):
#TODO:check correct num of bands
input = self.getParameterValue(SplitRGBBands.INPUT)
temp = SextanteUtils.getTempFilename()
r = self.getOutputValue(SplitRGBBands.R)
g = self.getOutputValue(SplitRGBBands.G)
b = self.getOutputValue(SplitRGBBands.B)
commands = []
if SextanteUtils.isWindows():
commands.append("io_gdal 0 -GRIDS \"" + temp + "\" -FILES \"" +
input + "\"")
commands.append("io_gdal 1 -GRIDS \"" + temp +
"_0001.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + r +
"\"")
commands.append("io_gdal 1 -GRIDS \"" + temp +
"_0002.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + g +
"\"")
commands.append("io_gdal 1 -GRIDS \"" + temp +
"_0003.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + b +
"\"")
else:
commands.append("libio_gdal 0 -GRIDS \"" + temp + "\" -FILES \"" +
input + "\"")
commands.append("libio_gdal 1 -GRIDS \"" + temp +
"_0001.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + r +
"\"")
commands.append("libio_gdal 1 -GRIDS \"" + temp +
"_0002.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + g +
"\"")
commands.append("libio_gdal 1 -GRIDS \"" + temp +
"_0003.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + b +
"\"")
SagaUtils.createSagaBatchJobFileFromSagaCommands(commands)
SagaUtils.executeSaga(progress)
def processAlgorithm(self, progress):
#TODO:check correct num of bands
input = self.getParameterValue(SplitRGBBands.INPUT)
temp = SextanteUtils.getTempFilename();
r = self.getOutputValue(SplitRGBBands.R)
g = self.getOutputValue(SplitRGBBands.G)
b = self.getOutputValue(SplitRGBBands.B)
commands = []
if SextanteUtils.isWindows():
commands.append("io_gdal 0 -GRIDS \"" + temp + "\" -FILES \"" + input+"\"")
commands.append("io_gdal 1 -GRIDS \"" + temp + "_0001.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + r + "\"");
commands.append("io_gdal 1 -GRIDS \"" + temp + "_0002.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + g + "\"");
commands.append("io_gdal 1 -GRIDS \"" + temp + "_0003.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + b + "\"");
else:
commands.append("libio_gdal 0 -GRIDS \"" + temp + "\" -FILES \"" + input + "\"")
commands.append("libio_gdal 1 -GRIDS \"" + temp + "_0001.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + r + "\"");
commands.append("libio_gdal 1 -GRIDS \"" + temp + "_0002.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + g + "\"");
commands.append("libio_gdal 1 -GRIDS \"" + temp + "_0003.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + b + "\"");
SagaUtils.createSagaBatchJobFileFromSagaCommands(commands)
SagaUtils.executeSaga(progress);
def processAlgorithm(self, progress):
#TODO:check correct num of bands
input = self.getParameterValue(SplitRGBBands.INPUT)
temp = SextanteUtils.getTempFilename(None).replace('.', '')
basename = os.path.basename(temp)
validChars = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789"
safeBasename = ''.join(c for c in basename if c in validChars)
temp = os.path.join(os.path.dirname(temp), safeBasename)
r = self.getOutputValue(SplitRGBBands.R)
g = self.getOutputValue(SplitRGBBands.G)
b = self.getOutputValue(SplitRGBBands.B)
commands = []
if SextanteUtils.isWindows():
commands.append("io_gdal 0 -GRIDS \"" + temp + "\" -FILES \"" +
input + "\"")
commands.append("io_gdal 1 -GRIDS \"" + temp +
"_0001.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + r +
"\"")
commands.append("io_gdal 1 -GRIDS \"" + temp +
"_0002.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + g +
"\"")
commands.append("io_gdal 1 -GRIDS \"" + temp +
"_0003.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + b +
"\"")
else:
commands.append("libio_gdal 0 -GRIDS \"" + temp + "\" -FILES \"" +
input + "\"")
commands.append("libio_gdal 1 -GRIDS \"" + temp +
"_0001.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + r +
"\"")
commands.append("libio_gdal 1 -GRIDS \"" + temp +
"_0002.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + g +
"\"")
commands.append("libio_gdal 1 -GRIDS \"" + temp +
"_0003.sgrd\" -FORMAT 1 -TYPE 0 -FILE \"" + b +
"\"")
SagaUtils.createSagaBatchJobFileFromSagaCommands(commands)
SagaUtils.executeSaga(progress)
def processAlgorithm(self, progress):
if SextanteUtils.isWindows():
path = SagaUtils.sagaPath()
if path == "":
raise GeoAlgorithmExecutionException(
"SAGA folder is not configured.\nPlease configure it before running SAGA algorithms."
)
commands = list()
self.exportedLayers = {}
#1: Export rasters to sgrd and vectors to shp
# Tables must be in dbf format. We check that.
if self.resample:
self.calculateResamplingExtent()
for param in self.parameters:
if isinstance(param, ParameterRaster):
if param.value == None:
continue
value = param.value
if not value.endswith("sgrd"):
commands.append(self.exportRasterLayer(value))
if self.resample:
commands.append(self.resampleRasterLayer(value))
if isinstance(param, ParameterVector):
if param.value == None:
continue
layer = QGisLayers.getObjectFromUri(param.value, False)
if layer:
filename = LayerExporter.exportVectorLayer(layer)
self.exportedLayers[param.value] = filename
elif not param.value.endswith("shp"):
raise GeoAlgorithmExecutionException(
"Unsupported file format")
if isinstance(param, ParameterTable):
if param.value == None:
continue
table = QGisLayers.getObjectFromUri(param.value, False)
if table:
filename = LayerExporter.exportTable(table)
self.exportedLayers[param.value] = filename
elif not param.value.endswith("shp"):
raise GeoAlgorithmExecutionException(
"Unsupported file format")
if isinstance(param, ParameterMultipleInput):
if param.value == None:
continue
layers = param.value.split(";")
if layers == None or len(layers) == 0:
continue
if param.datatype == ParameterMultipleInput.TYPE_RASTER:
for layerfile in layers:
if not layerfile.endswith("sgrd"):
commands.append(self.exportRasterLayer(layerfile))
if self.resample:
commands.append(
self.resampleRasterLayer(layerfile))
elif param.datatype == ParameterMultipleInput.TYPE_VECTOR_ANY:
for layerfile in layers:
layer = QGisLayers.getObjectFromUri(layerfile, False)
if layer:
filename = LayerExporter.exportVectorLayer(layer)
self.exportedLayers[layerfile] = filename
elif (not layerfile.endswith("shp")):
raise GeoAlgorithmExecutionException(
"Unsupported file format")
#2: set parameters and outputs
if SextanteUtils.isWindows() or SextanteUtils.isMac():
command = self.undecoratedGroup + " \"" + self.cmdname + "\""
else:
command = "lib" + self.undecoratedGroup + " \"" + self.cmdname + "\""
if self.hardcodedStrings:
for s in self.hardcodedStrings:
command += " " + s
for param in self.parameters:
if param.value is None:
continue
if isinstance(param,
(ParameterRaster, ParameterVector, ParameterTable)):
value = param.value
if value in self.exportedLayers.keys():
command += (" -" + param.name + " \"" +
self.exportedLayers[value] + "\"")
else:
command += (" -" + param.name + " \"" + value + "\"")
elif isinstance(param, ParameterMultipleInput):
s = param.value
for layer in self.exportedLayers.keys():
s = s.replace(layer, self.exportedLayers[layer])
command += (" -" + param.name + " \"" + s + "\"")
elif isinstance(param, ParameterBoolean):
if param.value:
command += (" -" + param.name)
elif isinstance(param, ParameterFixedTable):
tempTableFile = SextanteUtils.getTempFilename("txt")
f = open(tempTableFile, "w")
f.write('\t'.join([col for col in param.cols]) + "\n")
values = param.value.split(",")
for i in range(0, len(values), 3):
s = values[i] + "\t" + values[i +
1] + "\t" + values[i +
2] + "\n"
f.write(s)
f.close()
command += (" -" + param.name + " \"" + tempTableFile + "\"")
elif isinstance(param, ParameterExtent):
#'we have to substract/add half cell size, since saga is center based, not corner based
halfcell = self.getOutputCellsize() / 2
offset = [halfcell, -halfcell, halfcell, -halfcell]
values = param.value.split(",")
for i in range(4):
command += (" -" + self.extentParamNames[i] + " " +
str(float(values[i]) + offset[i]))
elif isinstance(param, (ParameterNumber, ParameterSelection)):
command += (" -" + param.name + " " + str(param.value))
else:
command += (" -" + param.name + " \"" + str(param.value) +
"\"")
for out in self.outputs:
if isinstance(out, OutputRaster):
filename = out.getCompatibleFileName(self)
filename = SextanteUtils.tempFolder(
) + os.sep + os.path.basename(filename) + ".sgrd"
command += (" -" + out.name + " \"" + filename + "\"")
if isinstance(out, OutputVector):
filename = out.getCompatibleFileName(self)
command += (" -" + out.name + " \"" + filename + "\"")
if isinstance(out, OutputTable):
filename = out.getCompatibleFileName(self)
command += (" -" + out.name + " \"" + filename + "\"")
commands.append(command)
#3:Export resulting raster layers
for out in self.outputs:
if isinstance(out, OutputRaster):
filename = out.getCompatibleFileName(self)
filename2 = SextanteUtils.tempFolder(
) + os.sep + os.path.basename(filename) + ".sgrd"
if SextanteUtils.isWindows() or SextanteUtils.isMac():
commands.append("io_gdal 1 -GRIDS \"" + filename2 +
"\" -FORMAT 1 -TYPE 0 -FILE \"" +
filename + "\"")
else:
commands.append("libio_gdal 1 -GRIDS \"" + filename2 +
"\" -FORMAT 1 -TYPE 0 -FILE \"" +
filename + "\"")
#4 Run SAGA
SagaUtils.createSagaBatchJobFileFromSagaCommands(commands)
loglines = []
loglines.append("SAGA execution commands")
for line in commands:
progress.setCommand(line)
loglines.append(line)
if SextanteConfig.getSetting(SagaUtils.SAGA_LOG_COMMANDS):
SextanteLog.addToLog(SextanteLog.LOG_INFO, loglines)
SagaUtils.executeSaga(progress)
def processAlgorithm(self, progress):
if SextanteUtils.isWindows():
path = SagaUtils.sagaPath()
if path == "":
raise GeoAlgorithmExecutionException("SAGA folder is not configured.\nPlease configure it before running SAGA algorithms.")
commands = list()
self.exportedLayers = {}
#1: Export rasters to sgrd and vectors to shp
# Tables must be in dbf format. We check that.
if self.resample:
self.calculateResamplingExtent()
for param in self.parameters:
if isinstance(param, ParameterRaster):
if param.value == None:
continue
value = param.value
if not value.endswith("sgrd"):
commands.append(self.exportRasterLayer(value))
if self.resample:
commands.append(self.resampleRasterLayer(value));
if isinstance(param, ParameterVector):
if param.value == None:
continue
layer = QGisLayers.getObjectFromUri(param.value, False)
if layer:
filename = LayerExporter.exportVectorLayer(layer)
self.exportedLayers[param.value]=filename
elif not param.value.endswith("shp"):
raise GeoAlgorithmExecutionException("Unsupported file format")
if isinstance(param, ParameterTable):
if param.value == None:
continue
table = QGisLayers.getObjectFromUri(param.value, False)
if table:
filename = LayerExporter.exportTable(table)
self.exportedLayers[param.value]=filename
elif not param.value.endswith("shp"):
raise GeoAlgorithmExecutionException("Unsupported file format")
if isinstance(param, ParameterMultipleInput):
if param.value == None:
continue
layers = param.value.split(";")
if layers == None or len(layers) == 0:
continue
if param.datatype == ParameterMultipleInput.TYPE_RASTER:
for layerfile in layers:
if not layerfile.endswith("sgrd"):
commands.append(self.exportRasterLayer(layerfile))
if self.resample:
commands.append(self.resampleRasterLayer(layerfile));
elif param.datatype == ParameterMultipleInput.TYPE_VECTOR_ANY:
for layerfile in layers:
layer = QGisLayers.getObjectFromUri(layerfile, False)
if layer:
filename = LayerExporter.exportVectorLayer(layer)
self.exportedLayers[layerfile]=filename
elif (not layerfile.endswith("shp")):
raise GeoAlgorithmExecutionException("Unsupported file format")
#2: set parameters and outputs
if SextanteUtils.isWindows():
command = self.undecoratedGroup + " \"" + self.cmdname + "\""
else:
command = "lib" + self.undecoratedGroup + " \"" + self.cmdname + "\""
for param in self.parameters:
if param.value is None:
continue
if isinstance(param, (ParameterRaster, ParameterVector, ParameterTable)):
value = param.value
if value in self.exportedLayers.keys():
command+=(" -" + param.name + " \"" + self.exportedLayers[value] + "\"")
else:
command+=(" -" + param.name + " \"" + value + "\"")
elif isinstance(param, ParameterMultipleInput):
s = param.value
for layer in self.exportedLayers.keys():
s = s.replace(layer, self.exportedLayers[layer])
command+=(" -" + param.name + " \"" + s + "\"");
elif isinstance(param, ParameterBoolean):
if param.value:
command+=(" -" + param.name);
elif isinstance(param, ParameterFixedTable):
tempTableFile = SextanteUtils.getTempFilename("txt")
f = open(tempTableFile, "w")
f.write('\t'.join([col for col in param.cols]) + "\n")
values = param.value.split(",")
for i in range(0, len(values), 3):
s = values[i] + "\t" + values[i+1] + "\t" + values[i+2] + "\n"
f.write(s)
f.close()
command+=( " -" + param.name + " \"" + tempTableFile + "\"")
elif isinstance(param, ParameterExtent):
#'we have to substract/add half cell size, since saga is center based, not corner based
halfcell = self.getOutputCellsize() / 2
offset = [halfcell, -halfcell, halfcell, -halfcell]
values = param.value.split(",")
for i in range(4):
command+=(" -" + self.extentParamNames[i] + " " + str(float(values[i]) + offset[i]));
elif isinstance(param, (ParameterNumber, ParameterSelection)):
command+=(" -" + param.name + " " + str(param.value));
else:
command+=(" -" + param.name + " \"" + str(param.value) + "\"");
for out in self.outputs:
if isinstance(out, OutputRaster):
filename = out.getCompatibleFileName(self)#filename = out.value
#===============================================================
# if not filename.endswith(".tif"):
# filename += ".tif"
# out.value = filename
#===============================================================
filename = SextanteUtils.tempFolder() + os.sep + os.path.basename(filename) + ".sgrd"
command+=(" -" + out.name + " \"" + filename + "\"");
if isinstance(out, OutputVector):
filename = out.getCompatibleFileName(self)#out.value
#===============================================================
# if not filename.endswith(".shp"):
# filename += ".shp"
# out.value = filename
#===============================================================
command+=(" -" + out.name + " \"" + filename + "\"");
if isinstance(out, OutputTable):
filename = out.getCompatibleFileName(self)#out.value
#===============================================================
# if not filename.endswith(".dbf"):
# filename += ".dbf"
# out.value = filename
#===============================================================
command+=(" -" + out.name + " \"" + filename + "\"");
commands.append(command)
#3:Export resulting raster layers
for out in self.outputs:
if isinstance(out, OutputRaster):
filename = out.getCompatibleFileName(self)
filename2 = SextanteUtils.tempFolder() + os.sep + os.path.basename(filename) + ".sgrd"
if SextanteUtils.isWindows():
commands.append("io_gdal 1 -GRIDS \"" + filename2 + "\" -FORMAT 1 -TYPE 0 -FILE \"" + filename + "\"");
else:
commands.append("libio_gdal 1 -GRIDS \"" + filename2 + "\" -FORMAT 1 -TYPE 0 -FILE \"" + filename + "\"");
#4 Run SAGA
SagaUtils.createSagaBatchJobFileFromSagaCommands(commands)
loglines = []
loglines.append("SAGA execution commands")
for line in commands:
progress.setCommand(line)
loglines.append(line)
if SextanteConfig.getSetting(SagaUtils.SAGA_LOG_COMMANDS):
SextanteLog.addToLog(SextanteLog.LOG_INFO, loglines)
SagaUtils.executeSaga(progress);