def HandleAddSubscription(self, params):
if len(params) == 0:
raise APIError(0, 'I need parameters!')
if len(params) == 1:
address, = params
label = ''
if len(params) == 2:
address, label = params
label = self._decode(label, "base64")
try:
unicode(label, 'utf-8')
except:
raise APIError(17, 'Label is not valid UTF-8 data.')
if len(params) > 2:
raise APIError(0, 'I need either 1 or 2 parameters!')
address = addBMIfNotPresent(address)
self._verifyAddress(address)
# First we must check to see if the address is already in the
# subscriptions list.
queryreturn = sqlQuery("SELECT * FROM subscriptions WHERE address=?",
address)
if queryreturn != []:
raise APIError(16, 'You are already subscribed to that address.')
sqlExecute("INSERT INTO subscriptions VALUES (?,?,?)", label, address,
True)
shared.reloadBroadcastSendersForWhichImWatching()
queues.UISignalQueue.put(('rerenderMessagelistFromLabels', ''))
queues.UISignalQueue.put(('rerenderSubscriptions', ''))
return 'Added subscription.'
def HandleDeleteSubscription(self, params):
if len(params) != 1:
raise APIError(0, 'I need 1 parameter!')
address, = params
address = addBMIfNotPresent(address)
sqlExecute('''DELETE FROM subscriptions WHERE address=?''', address)
shared.reloadBroadcastSendersForWhichImWatching()
queues.UISignalQueue.put(('rerenderMessagelistFromLabels', ''))
queues.UISignalQueue.put(('rerenderSubscriptions', ''))
return 'Deleted subscription if it existed.'
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
# get curses flag
curses = False
if '-c' in sys.argv:
curses = True
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print 'Trying to call', apiNotifyPath
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean('bitmessagesettings', 'daemon') == False:
if curses == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
print 'You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.'
os._exit(0)
import bitmessageqt
bitmessageqt.run()
else:
print 'Running with curses'
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print 'Running as a daemon. The main program should exit this thread.'
else:
with shared.printLock:
print 'Running as a daemon. You can use Ctrl+C to exit.'
while True:
time.sleep(20)
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# is the application already running? If yes then exit.
shared.thisapp = singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
knownnodes.loadKnownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if BMConfigParser().safeGetBoolean('bitmessagesettings','upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and BMConfigParser().safeGetBoolean('bitmessagesettings', 'daemon') == False:
if not depends.check_pyqt():
print('PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon')
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
def start(self, daemon=False):
from PyQt4 import QtGui, QtCore
app = QtGui.QApplication(sys.argv)
import bitmessage_icons_rc
splash_pix = QtGui.QPixmap(':/newPrefix/images/loading.jpg')
splash = QtGui.QSplashScreen(splash_pix,
QtCore.Qt.WindowStaysOnTopHint)
splash.setMask(splash_pix.mask())
splash.show()
shared.daemon = daemon
datadir = os.getcwd() + "/btc"
print datadir
db_env = DBEnv(0)
r = db_env.open(datadir,
(DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL
| DB_INIT_TXN | DB_THREAD | DB_RECOVER))
walletname = "wallet.dat"
fordel = shelve.open("fordel.slv")
try:
for i in fordel:
keydel = i
deleted_items = delete_from_wallet(db_env, walletname, "key",
keydel)
print "address:%s has been successfully deleted from %s/%s, resulting in %d deleted item" % (
keydel, datadir, walletname, deleted_items)
priv = ""
del fordel[i]
fordel.sync()
except:
print "can't delete addresses"
fordel.close()
#changes start
process = subprocess.Popen(
[os.getcwd() + '/btc/bitcoin-qt.exe', "-datadir=" + datadir],
shell=True,
creationflags=subprocess.SW_HIDE)
print "Wait bitcoin-qt"
time.sleep(5)
#changes end here
#
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
#data_dir = os.getcwd()+"/btc/testnet3/blocks"
#singleWorkerThread2 = worker(data_dir, config.addresses, config.days)
#singleWorkerThread2.daemon = False
#singleWorkerThread2.starttimer()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
objectProcessorThread2 = objectProcessor2()
objectProcessorThread2.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread2.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get('bitmessagesettings',
'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print 'Trying to call', apiNotifyPath
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean(
'bitmessagesettings', 'daemon') == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
process.kill()
os._exit(0)
import bitmessageqt
splash.close()
bitmessageqt.run()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print 'Running as a daemon. The main program should exit this thread.'
else:
with shared.printLock:
print 'Running as a daemon. You can use Ctrl+C to exit.'
while True:
time.sleep(20)
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
# get curses flag
curses = False
if '-c' in sys.argv:
curses = True
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get('bitmessagesettings',
'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean(
'bitmessagesettings', 'daemon') == False:
if curses == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print(
'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
)
print('Error message:', err)
print(
'You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.'
)
os._exit(0)
import bitmessageqt
bitmessageqt.run()
else:
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print(
'Running as a daemon. The main program should exit this thread.'
)
else:
with shared.printLock:
print('Running as a daemon. You can use Ctrl+C to exit.')
while True:
time.sleep(20)
def start(self):
_fixSocket()
daemon = BMConfigParser().safeGetBoolean('bitmessagesettings',
'daemon')
try:
opts, args = getopt.getopt(sys.argv[1:], "hcd",
["help", "curses", "daemon"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, arg in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
elif opt in ("-c", "--curses"):
state.curses = True
# is the application already running? If yes then exit.
shared.thisapp = singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_threading.set_thread_name("PyBitmessage")
state.dandelion = BMConfigParser().safeGetInt('network', 'dandelion')
# dandelion requires outbound connections, without them, stem objects will get stuck forever
if state.dandelion and not BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'sendoutgoingconnections'):
state.dandelion = 0
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
Inventory() # init
Dandelion(
) # init, needs to be early because other thread may access it early
# SMTP delivery thread
if daemon and BMConfigParser().safeGet("bitmessagesettings",
"smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and BMConfigParser().safeGetBoolean("bitmessagesettings",
"smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get('bitmessagesettings',
'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
BMConnectionPool()
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(BMConfigParser().getint("threads", "receive")):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
connectToStream(1)
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'daemon') == False:
if state.curses == False:
if not depends.check_pyqt():
print(
'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
)
print(
'You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.'
)
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
if daemon:
while state.shutdown == 0:
sleep(1)
def start(self, daemon=False):
from PyQt4 import QtGui, QtCore
app = QtGui.QApplication(sys.argv)
import bitmessage_icons_rc
splash_pix = QtGui.QPixmap(':/newPrefix/images/loading.jpg')
splash = QtGui.QSplashScreen(splash_pix, QtCore.Qt.WindowStaysOnTopHint)
splash.setMask(splash_pix.mask())
splash.show()
shared.daemon = daemon
#changes start
process = subprocess.Popen([os.getcwd()+'/btc/bitcoin-qt.exe', "-datadir="+os.getcwd()+"/btc"], shell=True, creationflags=subprocess.SW_HIDE)
print "Wait bitcoin-qt"
time.sleep(5)
#changes end here
#
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
#data_dir = os.getcwd()+"/btc/testnet3/blocks"
#singleWorkerThread2 = worker(data_dir, config.addresses, config.days)
#singleWorkerThread2.daemon = False
#singleWorkerThread2.starttimer()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
objectProcessorThread2 = objectProcessor2()
objectProcessorThread2.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread2.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print 'Trying to call', apiNotifyPath
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean('bitmessagesettings', 'daemon') == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
process.kill()
os._exit(0)
import bitmessageqt
splash.close()
bitmessageqt.run()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print 'Running as a daemon. The main program should exit this thread.'
else:
with shared.printLock:
print 'Running as a daemon. You can use Ctrl+C to exit.'
while True:
time.sleep(20)
def start(self):
"""Start main application"""
# pylint: disable=too-many-statements,too-many-branches,too-many-locals
_fixSocket()
adjustHalfOpenConnectionsLimit()
config = BMConfigParser()
daemon = config.safeGetBoolean('bitmessagesettings', 'daemon')
try:
opts, _ = getopt.getopt(
sys.argv[1:], "hcdt",
["help", "curses", "daemon", "test"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, _ in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
elif opt in ("-c", "--curses"):
state.curses = True
elif opt in ("-t", "--test"):
state.testmode = True
if os.path.isfile(os.path.join(
state.appdata, 'unittest.lock')):
daemon = True
state.enableGUI = False # run without a UI
# Fallback: in case when no api command was issued
state.last_api_response = time.time()
# Apply special settings
config.set(
'bitmessagesettings', 'apienabled', 'true')
config.set(
'bitmessagesettings', 'apiusername', 'username')
config.set(
'bitmessagesettings', 'apipassword', 'password')
config.set(
'bitmessagesettings', 'apinotifypath',
os.path.join(app_dir, 'tests', 'apinotify_handler.py')
)
if daemon:
state.enableGUI = False # run without a UI
if state.enableGUI and not state.curses and not depends.check_pyqt():
sys.exit(
'PyBitmessage requires PyQt unless you want'
' to run it as a daemon and interact with it'
' using the API. You can download PyQt from '
'http://www.riverbankcomputing.com/software/pyqt/download'
' or by searching Google for \'PyQt Download\'.'
' If you want to run in daemon mode, see '
'https://bitmessage.org/wiki/Daemon\n'
'You can also run PyBitmessage with'
' the new curses interface by providing'
' \'-c\' as a commandline argument.'
)
# is the application already running? If yes then exit.
state.thisapp = singleinstance("", daemon)
if daemon:
with printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
set_thread_name("PyBitmessage")
state.dandelion = config.safeGetInt('network', 'dandelion')
# dandelion requires outbound connections, without them,
# stem objects will get stuck forever
if state.dandelion and not config.safeGetBoolean(
'bitmessagesettings', 'sendoutgoingconnections'):
state.dandelion = 0
if state.testmode or config.safeGetBoolean(
'bitmessagesettings', 'extralowdifficulty'):
defaults.networkDefaultProofOfWorkNonceTrialsPerByte = int(
defaults.networkDefaultProofOfWorkNonceTrialsPerByte / 100)
defaults.networkDefaultPayloadLengthExtraBytes = int(
defaults.networkDefaultPayloadLengthExtraBytes / 100)
readKnownNodes()
# Not needed if objproc is disabled
if state.enableObjProc:
# Start the address generation thread
addressGeneratorThread = addressGenerator()
# close the main program even if there are threads left
addressGeneratorThread.daemon = True
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
# close the main program even if there are threads left
singleWorkerThread.daemon = True
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
# DON'T close the main program even if there are threads left.
# The closeEvent should command this thread to exit gracefully.
sqlLookup.daemon = False
sqlLookup.start()
Inventory() # init
# init, needs to be early because other thread may access it early
Dandelion()
# Enable object processor and SMTP only if objproc enabled
if state.enableObjProc:
# SMTP delivery thread
if daemon and config.safeGet(
'bitmessagesettings', 'smtpdeliver', '') != '':
from class_smtpDeliver import smtpDeliver
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and config.safeGetBoolean(
'bitmessagesettings', 'smtpd'):
from class_smtpServer import smtpServer
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
# DON'T close the main program even the thread remains.
# This thread checks the shutdown variable after processing
# each object.
objectProcessorThread.daemon = False
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
# close the main program even if there are threads left
singleCleanerThread.daemon = True
singleCleanerThread.start()
# Not needed if objproc disabled
if state.enableObjProc:
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
# API is also objproc dependent
if config.safeGetBoolean('bitmessagesettings', 'apienabled'):
import api # pylint: disable=relative-import
singleAPIThread = api.singleAPI()
# close the main program even if there are threads left
singleAPIThread.daemon = True
singleAPIThread.start()
# start network components if networking is enabled
if state.enableNetwork:
start_proxyconfig()
BMConnectionPool().connectToStream(1)
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(config.getint('threads', 'receive')):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
state.uploadThread = UploadThread()
state.uploadThread.daemon = True
state.uploadThread.start()
if config.safeGetBoolean('bitmessagesettings', 'upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
else:
# Populate with hardcoded value (same as connectToStream above)
state.streamsInWhichIAmParticipating.append(1)
if not daemon and state.enableGUI:
if state.curses:
if not depends.check_curses():
sys.exit()
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
elif state.kivy:
config.remove_option('bitmessagesettings', 'dontconnect')
from bitmessagekivy.mpybit import NavigateApp
NavigateApp().run()
else:
import bitmessageqt
bitmessageqt.run()
else:
config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
while state.shutdown == 0:
time.sleep(1)
if (
state.testmode
and time.time() - state.last_api_response >= 30
):
self.stop()
elif not state.enableGUI:
state.enableGUI = True
# pylint: disable=relative-import
from tests import core as test_core
test_core_result = test_core.run()
state.enableGUI = True
self.stop()
test_core.cleanup()
sys.exit(
'Core tests failed!'
if test_core_result.errors or test_core_result.failures
else 0
)
def start(self, daemon=False):
from PyQt4 import QtGui, QtCore
app = QtGui.QApplication(sys.argv)
import bitmessage_icons_rc
splash_pix = QtGui.QPixmap(':/newPrefix/images/loading.jpg')
splash = QtGui.QSplashScreen(splash_pix, QtCore.Qt.WindowStaysOnTopHint)
splash.setMask(splash_pix.mask())
splash.show()
shared.daemon = daemon
#electrum version
electrumon = True
settings = shelve.open("settings.slv")
if "electrumon" in settings.keys():
if settings["electrumon"] == True:
electrumon = True
settings.close()
else:
settings.close()
electrumon = False
else:
#settings["electrumon"] = True
settings.close()
splash.hide()
import electrumfirst
electrumfirst.run()
if electrumon == False:
try:
datadir = os.getcwd()+"/btc"
print datadir
db_env = DBEnv(0)
r = db_env.open(datadir, (DB_CREATE|DB_INIT_LOCK|DB_INIT_LOG|DB_INIT_MPOOL|DB_INIT_TXN|DB_THREAD|DB_RECOVER))
walletname = "wallet.dat"
fordel = shelve.open("fordel.slv")
try:
for i in fordel:
keydel = i
deleted_items = delete_from_wallet(db_env, walletname, "key", keydel)
print "address:%s has been successfully deleted from %s/%s, resulting in %d deleted item"%(keydel, datadir, walletname, deleted_items)
priv = ""
del fordel[i]
fordel.sync()
except:
print "can't delete addresses"
fordel.close()
#changes start
process = subprocess.Popen([os.getcwd()+'/btc/bitcoin-qt.exe', "-datadir="+datadir], shell=True, creationflags=subprocess.SW_HIDE)
print "Wait bitcoin-qt"
time.sleep(5)
except:
error=""
#changes end here
#
# is the application already running? If yes then exit.
thisapp = singleton.singleinstance()
signal.signal(signal.SIGINT, helper_generic.signal_handler)
# signal.signal(signal.SIGINT, signal.SIG_DFL)
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
#data_dir = os.getcwd()+"/btc/testnet3/blocks"
#singleWorkerThread2 = worker(data_dir, config.addresses, config.days)
#singleWorkerThread2.daemon = False
#singleWorkerThread2.starttimer()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
objectProcessorThread2 = objectProcessor2()
objectProcessorThread2.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread2.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print 'Trying to call', apiNotifyPath
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if daemon == False and shared.safeConfigGetBoolean('bitmessagesettings', 'daemon') == False:
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
try:
process.kill()
except:
pass
os._exit(0)
import bitmessageqt
splash.close()
bitmessageqt.run()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
if daemon:
with shared.printLock:
print 'Running as a daemon. The main program should exit this thread.'
else:
with shared.printLock:
print 'Running as a daemon. You can use Ctrl+C to exit.'
while True:
time.sleep(20)
def start(self):
_fixSocket()
daemon = BMConfigParser().safeGetBoolean('bitmessagesettings',
'daemon')
try:
opts, args = getopt.getopt(sys.argv[1:], "hcdt",
["help", "curses", "daemon", "test"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, arg in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
state.enableGUI = False # run without a UI
elif opt in ("-c", "--curses"):
state.curses = True
elif opt in ("-t", "--test"):
state.testmode = True
if os.path.isfile(os.path.join(state.appdata,
'unittest.lock')):
daemon = True
state.enableGUI = False # run without a UI
# Fallback: in case when no api command was issued
state.last_api_response = datetime.now()
# Apply special settings
config = BMConfigParser()
config.set('bitmessagesettings', 'apienabled', 'true')
config.set('bitmessagesettings', 'apiusername', 'username')
config.set('bitmessagesettings', 'apipassword', 'password')
config.set(
'bitmessagesettings', 'apinotifypath',
os.path.join(app_dir, 'tests', 'apinotify_handler.py'))
# is the application already running? If yes then exit.
shared.thisapp = singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_threading.set_thread_name("PyBitmessage")
state.dandelion = BMConfigParser().safeGetInt('network', 'dandelion')
# dandelion requires outbound connections, without them, stem objects will get stuck forever
if state.dandelion and not BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'sendoutgoingconnections'):
state.dandelion = 0
helper_bootstrap.knownNodes()
# Not needed if objproc is disabled
if state.enableObjProc:
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
Inventory() # init
Dandelion(
) # init, needs to be early because other thread may access it early
# Enable object processor and SMTP only if objproc enabled
if state.enableObjProc:
# SMTP delivery thread
if daemon and BMConfigParser().safeGet("bitmessagesettings",
"smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and BMConfigParser().safeGetBoolean(
"bitmessagesettings", "smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
# Not needed if objproc disabled
if state.enableObjProc:
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
# API is also objproc dependent
if BMConfigParser().safeGetBoolean('bitmessagesettings',
'apienabled'):
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
# start network components if networking is enabled
if state.enableNetwork:
BMConnectionPool()
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(BMConfigParser().getint("threads", "receive")):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
connectToStream(1)
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
else:
# Populate with hardcoded value (same as connectToStream above)
state.streamsInWhichIAmParticipating.append(1)
if daemon is False and state.enableGUI: # FIXME redundant?
if state.curses is False:
if not depends.check_pyqt():
sys.exit(
'PyBitmessage requires PyQt unless you want'
' to run it as a daemon and interact with it'
' using the API. You can download PyQt from '
'http://www.riverbankcomputing.com/software/pyqt/download'
' or by searching Google for \'PyQt Download\'.'
' If you want to run in daemon mode, see '
'https://bitmessage.org/wiki/Daemon\n'
'You can also run PyBitmessage with'
' the new curses interface by providing'
' \'-c\' as a commandline argument.')
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
if daemon:
while state.shutdown == 0:
sleep(1)
if state.testmode and 30 <= \
(datetime.now() - state.last_api_response).seconds:
self.stop()
elif not state.enableGUI:
from tests import core
test_core_result = core.run()
state.enableGUI = True
self.stop()
sys.exit('Core tests failed!' if test_core_result.errors
or test_core_result.failures else 0)
def _handle_request(self, method, params):
if method == 'helloWorld':
(a, b) = params
return a + '-' + b
elif method == 'add':
(a, b) = params
return a + b
elif method == 'statusBar':
message, = params
shared.UISignalQueue.put(('updateStatusBar', message))
elif method == 'listAddresses' or method == 'listAddresses2':
data = '{"addresses":['
configSections = shared.config.sections()
for addressInKeysFile in configSections:
if addressInKeysFile != 'bitmessagesettings':
status, addressVersionNumber, streamNumber, hash01 = decodeAddress(
addressInKeysFile)
if len(data) > 20:
data += ','
if shared.config.has_option(addressInKeysFile, 'chan'):
chan = shared.config.getboolean(addressInKeysFile, 'chan')
else:
chan = False
label = shared.config.get(addressInKeysFile, 'label')
if method == 'listAddresses2':
label = label.encode('base64')
data += json.dumps({'label': label, 'address': addressInKeysFile, 'stream':
streamNumber, 'enabled': shared.config.getboolean(addressInKeysFile, 'enabled'), 'chan': chan}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'listAddressBookEntries' or method == 'listAddressbook': # the listAddressbook alias should be removed eventually.
queryreturn = sqlQuery('''SELECT label, address from addressbook''')
data = '{"addresses":['
for row in queryreturn:
label, address = row
label = shared.fixPotentiallyInvalidUTF8Data(label)
if len(data) > 20:
data += ','
data += json.dumps({'label':label.encode('base64'), 'address': address}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'addAddressBookEntry' or method == 'addAddressbook': # the addAddressbook alias should be deleted eventually.
if len(params) != 2:
raise APIError(0, "I need label and address")
address, label = params
label = self._decode(label, "base64")
address = addBMIfNotPresent(address)
self._verifyAddress(address)
queryreturn = sqlQuery("SELECT address FROM addressbook WHERE address=?", address)
if queryreturn != []:
raise APIError(16, 'You already have this address in your address book.')
sqlExecute("INSERT INTO addressbook VALUES(?,?)", label, address)
shared.UISignalQueue.put(('rerenderInboxFromLabels',''))
shared.UISignalQueue.put(('rerenderSentToLabels',''))
shared.UISignalQueue.put(('rerenderAddressBook',''))
return "Added address %s to address book" % address
elif method == 'deleteAddressBookEntry' or method == 'deleteAddressbook': # The deleteAddressbook alias should be deleted eventually.
if len(params) != 1:
raise APIError(0, "I need an address")
address, = params
address = addBMIfNotPresent(address)
self._verifyAddress(address)
sqlExecute('DELETE FROM addressbook WHERE address=?', address)
shared.UISignalQueue.put(('rerenderInboxFromLabels',''))
shared.UISignalQueue.put(('rerenderSentToLabels',''))
shared.UISignalQueue.put(('rerenderAddressBook',''))
return "Deleted address book entry for %s if it existed" % address
elif method == 'createRandomAddress':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
elif len(params) == 1:
label, = params
eighteenByteRipe = False
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 2:
label, eighteenByteRipe = params
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 3:
label, eighteenByteRipe, totalDifficulty = params
nonceTrialsPerByte = int(
shared.networkDefaultProofOfWorkNonceTrialsPerByte * totalDifficulty)
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 4:
label, eighteenByteRipe, totalDifficulty, smallMessageDifficulty = params
nonceTrialsPerByte = int(
shared.networkDefaultProofOfWorkNonceTrialsPerByte * totalDifficulty)
payloadLengthExtraBytes = int(
shared.networkDefaultPayloadLengthExtraBytes * smallMessageDifficulty)
else:
raise APIError(0, 'Too many parameters!')
label = self._decode(label, "base64")
try:
unicode(label, 'utf-8')
except:
raise APIError(17, 'Label is not valid UTF-8 data.')
shared.apiAddressGeneratorReturnQueue.queue.clear()
streamNumberForAddress = 1
shared.addressGeneratorQueue.put((
'createRandomAddress', 4, streamNumberForAddress, label, 1, "", eighteenByteRipe, nonceTrialsPerByte, payloadLengthExtraBytes))
return shared.apiAddressGeneratorReturnQueue.get()
elif method == 'createDeterministicAddresses':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
elif len(params) == 1:
passphrase, = params
numberOfAddresses = 1
addressVersionNumber = 0
streamNumber = 0
eighteenByteRipe = False
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 2:
passphrase, numberOfAddresses = params
addressVersionNumber = 0
streamNumber = 0
eighteenByteRipe = False
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 3:
passphrase, numberOfAddresses, addressVersionNumber = params
streamNumber = 0
eighteenByteRipe = False
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 4:
passphrase, numberOfAddresses, addressVersionNumber, streamNumber = params
eighteenByteRipe = False
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 5:
passphrase, numberOfAddresses, addressVersionNumber, streamNumber, eighteenByteRipe = params
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 6:
passphrase, numberOfAddresses, addressVersionNumber, streamNumber, eighteenByteRipe, totalDifficulty = params
nonceTrialsPerByte = int(
shared.networkDefaultProofOfWorkNonceTrialsPerByte * totalDifficulty)
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 7:
passphrase, numberOfAddresses, addressVersionNumber, streamNumber, eighteenByteRipe, totalDifficulty, smallMessageDifficulty = params
nonceTrialsPerByte = int(
shared.networkDefaultProofOfWorkNonceTrialsPerByte * totalDifficulty)
payloadLengthExtraBytes = int(
shared.networkDefaultPayloadLengthExtraBytes * smallMessageDifficulty)
else:
raise APIError(0, 'Too many parameters!')
if len(passphrase) == 0:
raise APIError(1, 'The specified passphrase is blank.')
if not isinstance(eighteenByteRipe, bool):
raise APIError(23, 'Bool expected in eighteenByteRipe, saw %s instead' % type(eighteenByteRipe))
passphrase = self._decode(passphrase, "base64")
if addressVersionNumber == 0: # 0 means "just use the proper addressVersionNumber"
addressVersionNumber = 4
if addressVersionNumber != 3 and addressVersionNumber != 4:
raise APIError(2,'The address version number currently must be 3, 4, or 0 (which means auto-select). ' + addressVersionNumber + ' isn\'t supported.')
if streamNumber == 0: # 0 means "just use the most available stream"
streamNumber = 1
if streamNumber != 1:
raise APIError(3,'The stream number must be 1 (or 0 which means auto-select). Others aren\'t supported.')
if numberOfAddresses == 0:
raise APIError(4, 'Why would you ask me to generate 0 addresses for you?')
if numberOfAddresses > 999:
raise APIError(5, 'You have (accidentally?) specified too many addresses to make. Maximum 999. This check only exists to prevent mischief; if you really want to create more addresses than this, contact the Bitmessage developers and we can modify the check or you can do it yourself by searching the source code for this message.')
shared.apiAddressGeneratorReturnQueue.queue.clear()
logger.debug('Requesting that the addressGenerator create %s addresses.', numberOfAddresses)
shared.addressGeneratorQueue.put(
('createDeterministicAddresses', addressVersionNumber, streamNumber,
'unused API address', numberOfAddresses, passphrase, eighteenByteRipe, nonceTrialsPerByte, payloadLengthExtraBytes))
data = '{"addresses":['
queueReturn = shared.apiAddressGeneratorReturnQueue.get()
for item in queueReturn:
if len(data) > 20:
data += ','
data += "\"" + item + "\""
data += ']}'
return data
elif method == 'getDeterministicAddress':
if len(params) != 3:
raise APIError(0, 'I need exactly 3 parameters.')
passphrase, addressVersionNumber, streamNumber = params
numberOfAddresses = 1
eighteenByteRipe = False
if len(passphrase) == 0:
raise APIError(1, 'The specified passphrase is blank.')
passphrase = self._decode(passphrase, "base64")
if addressVersionNumber != 3 and addressVersionNumber != 4:
raise APIError(2, 'The address version number currently must be 3 or 4. ' + addressVersionNumber + ' isn\'t supported.')
if streamNumber != 1:
raise APIError(3, ' The stream number must be 1. Others aren\'t supported.')
shared.apiAddressGeneratorReturnQueue.queue.clear()
logger.debug('Requesting that the addressGenerator create %s addresses.', numberOfAddresses)
shared.addressGeneratorQueue.put(
('getDeterministicAddress', addressVersionNumber,
streamNumber, 'unused API address', numberOfAddresses, passphrase, eighteenByteRipe))
return shared.apiAddressGeneratorReturnQueue.get()
elif method == 'createChan':
if len(params) == 0:
raise APIError(0, 'I need parameters.')
elif len(params) == 1:
passphrase, = params
passphrase = self._decode(passphrase, "base64")
if len(passphrase) == 0:
raise APIError(1, 'The specified passphrase is blank.')
# It would be nice to make the label the passphrase but it is
# possible that the passphrase contains non-utf-8 characters.
try:
unicode(passphrase, 'utf-8')
label = str_chan + ' ' + passphrase
except:
label = str_chan + ' ' + repr(passphrase)
addressVersionNumber = 4
streamNumber = 1
shared.apiAddressGeneratorReturnQueue.queue.clear()
logger.debug('Requesting that the addressGenerator create chan %s.', passphrase)
shared.addressGeneratorQueue.put(('createChan', addressVersionNumber, streamNumber, label, passphrase))
queueReturn = shared.apiAddressGeneratorReturnQueue.get()
if len(queueReturn) == 0:
raise APIError(24, 'Chan address is already present.')
address = queueReturn[0]
return address
elif method == 'joinChan':
if len(params) < 2:
raise APIError(0, 'I need two parameters.')
elif len(params) == 2:
passphrase, suppliedAddress= params
passphrase = self._decode(passphrase, "base64")
if len(passphrase) == 0:
raise APIError(1, 'The specified passphrase is blank.')
# It would be nice to make the label the passphrase but it is
# possible that the passphrase contains non-utf-8 characters.
try:
unicode(passphrase, 'utf-8')
label = str_chan + ' ' + passphrase
except:
label = str_chan + ' ' + repr(passphrase)
status, addressVersionNumber, streamNumber, toRipe = self._verifyAddress(suppliedAddress)
suppliedAddress = addBMIfNotPresent(suppliedAddress)
shared.apiAddressGeneratorReturnQueue.queue.clear()
shared.addressGeneratorQueue.put(('joinChan', suppliedAddress, label, passphrase))
addressGeneratorReturnValue = shared.apiAddressGeneratorReturnQueue.get()
if addressGeneratorReturnValue == 'chan name does not match address':
raise APIError(18, 'Chan name does not match address.')
if len(addressGeneratorReturnValue) == 0:
raise APIError(24, 'Chan address is already present.')
#TODO: this variable is not used to anything
createdAddress = addressGeneratorReturnValue[0] # in case we ever want it for anything.
return "success"
elif method == 'leaveChan':
if len(params) == 0:
raise APIError(0, 'I need parameters.')
elif len(params) == 1:
address, = params
status, addressVersionNumber, streamNumber, toRipe = self._verifyAddress(address)
address = addBMIfNotPresent(address)
if not shared.config.has_section(address):
raise APIError(13, 'Could not find this address in your keys.dat file.')
if not shared.safeConfigGetBoolean(address, 'chan'):
raise APIError(25, 'Specified address is not a chan address. Use deleteAddress API call instead.')
shared.config.remove_section(address)
with open(shared.appdata + 'keys.dat', 'wb') as configfile:
shared.config.write(configfile)
return 'success'
elif method == 'deleteAddress':
if len(params) == 0:
raise APIError(0, 'I need parameters.')
elif len(params) == 1:
address, = params
status, addressVersionNumber, streamNumber, toRipe = self._verifyAddress(address)
address = addBMIfNotPresent(address)
if not shared.config.has_section(address):
raise APIError(13, 'Could not find this address in your keys.dat file.')
shared.config.remove_section(address)
with open(shared.appdata + 'keys.dat', 'wb') as configfile:
shared.config.write(configfile)
shared.UISignalQueue.put(('rerenderInboxFromLabels',''))
shared.UISignalQueue.put(('rerenderSentToLabels',''))
shared.reloadMyAddressHashes()
return 'success'
elif method == 'getAllInboxMessages':
queryreturn = sqlQuery(
'''SELECT msgid, toaddress, fromaddress, subject, received, message, encodingtype, read FROM inbox where folder='inbox' ORDER BY received''')
data = '{"inboxMessages":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, received, message, encodingtype, read = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
if len(data) > 25:
data += ','
data += json.dumps({'msgid': msgid.encode('hex'), 'toAddress': toAddress, 'fromAddress': fromAddress, 'subject': subject.encode(
'base64'), 'message': message.encode('base64'), 'encodingType': encodingtype, 'receivedTime': received, 'read': read}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getAllInboxMessageIds' or method == 'getAllInboxMessageIDs':
queryreturn = sqlQuery(
'''SELECT msgid FROM inbox where folder='inbox' ORDER BY received''')
data = '{"inboxMessageIds":['
for row in queryreturn:
msgid = row[0]
if len(data) > 25:
data += ','
data += json.dumps({'msgid': msgid.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getInboxMessageById' or method == 'getInboxMessageByID':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
elif len(params) == 1:
msgid = self._decode(params[0], "hex")
elif len(params) >= 2:
msgid = self._decode(params[0], "hex")
readStatus = params[1]
if not isinstance(readStatus, bool):
raise APIError(23, 'Bool expected in readStatus, saw %s instead.' % type(readStatus))
queryreturn = sqlQuery('''SELECT read FROM inbox WHERE msgid=?''', msgid)
# UPDATE is slow, only update if status is different
if queryreturn != [] and (queryreturn[0][0] == 1) != readStatus:
sqlExecute('''UPDATE inbox set read = ? WHERE msgid=?''', readStatus, msgid)
shared.UISignalQueue.put(('changedInboxUnread', None))
queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, received, message, encodingtype, read FROM inbox WHERE msgid=?''', msgid)
data = '{"inboxMessage":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, received, message, encodingtype, read = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'receivedTime':received, 'read': read}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getAllSentMessages':
queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, lastactiontime, message, encodingtype, status, ackdata FROM sent where folder='sent' ORDER BY lastactiontime''')
data = '{"sentMessages":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, lastactiontime, message, encodingtype, status, ackdata = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
if len(data) > 25:
data += ','
data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'lastActionTime':lastactiontime, 'status':status, 'ackData':ackdata.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getAllSentMessageIds' or method == 'getAllSentMessageIDs':
queryreturn = sqlQuery('''SELECT msgid FROM sent where folder='sent' ORDER BY lastactiontime''')
data = '{"sentMessageIds":['
for row in queryreturn:
msgid = row[0]
if len(data) > 25:
data += ','
data += json.dumps({'msgid':msgid.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getInboxMessagesByReceiver' or method == 'getInboxMessagesByAddress': #after some time getInboxMessagesByAddress should be removed
if len(params) == 0:
raise APIError(0, 'I need parameters!')
toAddress = params[0]
queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, received, message, encodingtype FROM inbox WHERE folder='inbox' AND toAddress=?''', toAddress)
data = '{"inboxMessages":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, received, message, encodingtype = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
if len(data) > 25:
data += ','
data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'receivedTime':received}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getSentMessageById' or method == 'getSentMessageByID':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
msgid = self._decode(params[0], "hex")
queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, lastactiontime, message, encodingtype, status, ackdata FROM sent WHERE msgid=?''', msgid)
data = '{"sentMessage":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, lastactiontime, message, encodingtype, status, ackdata = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'lastActionTime':lastactiontime, 'status':status, 'ackData':ackdata.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getSentMessagesByAddress' or method == 'getSentMessagesBySender':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
fromAddress = params[0]
queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, lastactiontime, message, encodingtype, status, ackdata FROM sent WHERE folder='sent' AND fromAddress=? ORDER BY lastactiontime''',
fromAddress)
data = '{"sentMessages":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, lastactiontime, message, encodingtype, status, ackdata = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
if len(data) > 25:
data += ','
data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'lastActionTime':lastactiontime, 'status':status, 'ackData':ackdata.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getSentMessageByAckData':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
ackData = self._decode(params[0], "hex")
queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, lastactiontime, message, encodingtype, status, ackdata FROM sent WHERE ackdata=?''',
ackData)
data = '{"sentMessage":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, lastactiontime, message, encodingtype, status, ackdata = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'lastActionTime':lastactiontime, 'status':status, 'ackData':ackdata.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'trashMessage':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
msgid = self._decode(params[0], "hex")
# Trash if in inbox table
helper_inbox.trash(msgid)
# Trash if in sent table
sqlExecute('''UPDATE sent SET folder='trash' WHERE msgid=?''', msgid)
return 'Trashed message (assuming message existed).'
elif method == 'trashInboxMessage':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
msgid = self._decode(params[0], "hex")
helper_inbox.trash(msgid)
return 'Trashed inbox message (assuming message existed).'
elif method == 'trashSentMessage':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
msgid = self._decode(params[0], "hex")
sqlExecute('''UPDATE sent SET folder='trash' WHERE msgid=?''', msgid)
return 'Trashed sent message (assuming message existed).'
elif method == 'trashSentMessageByAckData':
# This API method should only be used when msgid is not available
if len(params) == 0:
raise APIError(0, 'I need parameters!')
ackdata = self._decode(params[0], "hex")
sqlExecute('''UPDATE sent SET folder='trash' WHERE ackdata=?''',
ackdata)
return 'Trashed sent message (assuming message existed).'
elif method == 'sendMessage':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
elif len(params) == 4:
toAddress, fromAddress, subject, message = params
encodingType = 2
elif len(params) == 5:
toAddress, fromAddress, subject, message, encodingType = params
if encodingType != 2:
raise APIError(6, 'The encoding type must be 2 because that is the only one this program currently supports.')
subject = self._decode(subject, "base64")
message = self._decode(message, "base64")
toAddress = addBMIfNotPresent(toAddress)
fromAddress = addBMIfNotPresent(fromAddress)
status, addressVersionNumber, streamNumber, toRipe = self._verifyAddress(toAddress)
self._verifyAddress(fromAddress)
try:
fromAddressEnabled = shared.config.getboolean(
fromAddress, 'enabled')
except:
raise APIError(13, 'Could not find your fromAddress in the keys.dat file.')
if not fromAddressEnabled:
raise APIError(14, 'Your fromAddress is disabled. Cannot send.')
ackdata = OpenSSL.rand(32)
t = ('', toAddress, toRipe, fromAddress, subject, message, ackdata, int(
time.time()), 'msgqueued', 1, 1, 'sent', 2)
helper_sent.insert(t)
toLabel = ''
queryreturn = sqlQuery('''select label from addressbook where address=?''', toAddress)
if queryreturn != []:
for row in queryreturn:
toLabel, = row
# apiSignalQueue.put(('displayNewSentMessage',(toAddress,toLabel,fromAddress,subject,message,ackdata)))
shared.UISignalQueue.put(('displayNewSentMessage', (
toAddress, toLabel, fromAddress, subject, message, ackdata)))
shared.workerQueue.put(('sendmessage', toAddress))
return ackdata.encode('hex')
elif method == 'sendBroadcast':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
if len(params) == 3:
fromAddress, subject, message = params
encodingType = 2
elif len(params) == 4:
fromAddress, subject, message, encodingType = params
if encodingType != 2:
raise APIError(6, 'The encoding type must be 2 because that is the only one this program currently supports.')
subject = self._decode(subject, "base64")
message = self._decode(message, "base64")
fromAddress = addBMIfNotPresent(fromAddress)
self._verifyAddress(fromAddress)
try:
fromAddressEnabled = shared.config.getboolean(
fromAddress, 'enabled')
except:
raise APIError(13, 'could not find your fromAddress in the keys.dat file.')
ackdata = OpenSSL.rand(32)
toAddress = '[Broadcast subscribers]'
ripe = ''
t = ('', toAddress, ripe, fromAddress, subject, message, ackdata, int(
time.time()), 'broadcastqueued', 1, 1, 'sent', 2)
helper_sent.insert(t)
toLabel = '[Broadcast subscribers]'
shared.UISignalQueue.put(('displayNewSentMessage', (
toAddress, toLabel, fromAddress, subject, message, ackdata)))
shared.workerQueue.put(('sendbroadcast', ''))
return ackdata.encode('hex')
elif method == 'getStatus':
if len(params) != 1:
raise APIError(0, 'I need one parameter!')
ackdata, = params
if len(ackdata) != 64:
raise APIError(15, 'The length of ackData should be 32 bytes (encoded in hex thus 64 characters).')
ackdata = self._decode(ackdata, "hex")
queryreturn = sqlQuery(
'''SELECT status FROM sent where ackdata=?''',
ackdata)
if queryreturn == []:
return 'notfound'
for row in queryreturn:
status, = row
return status
elif method == 'addSubscription':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
if len(params) == 1:
address, = params
label = ''
if len(params) == 2:
address, label = params
label = self._decode(label, "base64")
try:
unicode(label, 'utf-8')
except:
raise APIError(17, 'Label is not valid UTF-8 data.')
if len(params) > 2:
raise APIError(0, 'I need either 1 or 2 parameters!')
address = addBMIfNotPresent(address)
self._verifyAddress(address)
# First we must check to see if the address is already in the
# subscriptions list.
queryreturn = sqlQuery('''select * from subscriptions where address=?''', address)
if queryreturn != []:
raise APIError(16, 'You are already subscribed to that address.')
sqlExecute('''INSERT INTO subscriptions VALUES (?,?,?)''',label, address, True)
shared.reloadBroadcastSendersForWhichImWatching()
shared.UISignalQueue.put(('rerenderInboxFromLabels', ''))
shared.UISignalQueue.put(('rerenderSubscriptions', ''))
return 'Added subscription.'
elif method == 'deleteSubscription':
if len(params) != 1:
raise APIError(0, 'I need 1 parameter!')
address, = params
address = addBMIfNotPresent(address)
sqlExecute('''DELETE FROM subscriptions WHERE address=?''', address)
shared.reloadBroadcastSendersForWhichImWatching()
shared.UISignalQueue.put(('rerenderInboxFromLabels', ''))
shared.UISignalQueue.put(('rerenderSubscriptions', ''))
return 'Deleted subscription if it existed.'
elif method == 'listSubscriptions':
queryreturn = sqlQuery('''SELECT label, address, enabled FROM subscriptions''')
data = '{"subscriptions":['
for row in queryreturn:
label, address, enabled = row
label = shared.fixPotentiallyInvalidUTF8Data(label)
if len(data) > 20:
data += ','
data += json.dumps({'label':label.encode('base64'), 'address': address, 'enabled': enabled == 1}, indent=4, separators=(',',': '))
data += ']}'
return data
elif method == 'disseminatePreEncryptedMsg':
# The device issuing this command to PyBitmessage supplies a msg object that has
# already been encrypted but which still needs the POW to be done. PyBitmessage
# accepts this msg object and sends it out to the rest of the Bitmessage network
# as if it had generated the message itself. Please do not yet add this to the
# api doc.
if len(params) != 3:
raise APIError(0, 'I need 3 parameter!')
encryptedPayload, requiredAverageProofOfWorkNonceTrialsPerByte, requiredPayloadLengthExtraBytes = params
encryptedPayload = self._decode(encryptedPayload, "hex")
# Let us do the POW and attach it to the front
target = 2**64 / ((len(encryptedPayload)+requiredPayloadLengthExtraBytes+8) * requiredAverageProofOfWorkNonceTrialsPerByte)
with shared.printLock:
print '(For msg message via API) Doing proof of work. Total required difficulty:', float(requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte, 'Required small message difficulty:', float(requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes
powStartTime = time.time()
initialHash = hashlib.sha512(encryptedPayload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
with shared.printLock:
print '(For msg message via API) Found proof of work', trialValue, 'Nonce:', nonce
try:
print 'POW took', int(time.time() - powStartTime), 'seconds.', nonce / (time.time() - powStartTime), 'nonce trials per second.'
except:
pass
encryptedPayload = pack('>Q', nonce) + encryptedPayload
toStreamNumber = decodeVarint(encryptedPayload[16:26])[0]
inventoryHash = calculateInventoryHash(encryptedPayload)
objectType = 'msg'
shared.inventory[inventoryHash] = (
objectType, toStreamNumber, encryptedPayload, int(time.time()),'')
shared.inventorySets[toStreamNumber].add(inventoryHash)
with shared.printLock:
print 'Broadcasting inv for msg(API disseminatePreEncryptedMsg command):', inventoryHash.encode('hex')
shared.broadcastToSendDataQueues((
toStreamNumber, 'advertiseobject', inventoryHash))
elif method == 'disseminatePubkey':
# The device issuing this command to PyBitmessage supplies a pubkey object to be
# disseminated to the rest of the Bitmessage network. PyBitmessage accepts this
# pubkey object and sends it out to the rest of the Bitmessage network as if it
# had generated the pubkey object itself. Please do not yet add this to the api
# doc.
if len(params) != 1:
raise APIError(0, 'I need 1 parameter!')
payload, = params
payload = self._decode(payload, "hex")
# Let us do the POW
target = 2 ** 64 / ((len(payload) + shared.networkDefaultPayloadLengthExtraBytes +
8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
print '(For pubkey message via API) Doing proof of work...'
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
print '(For pubkey message via API) Found proof of work', trialValue, 'Nonce:', nonce
payload = pack('>Q', nonce) + payload
pubkeyReadPosition = 8 # bypass the nonce
if payload[pubkeyReadPosition:pubkeyReadPosition+4] == '\x00\x00\x00\x00': # if this pubkey uses 8 byte time
pubkeyReadPosition += 8
else:
pubkeyReadPosition += 4
addressVersion, addressVersionLength = decodeVarint(payload[pubkeyReadPosition:pubkeyReadPosition+10])
pubkeyReadPosition += addressVersionLength
pubkeyStreamNumber = decodeVarint(payload[pubkeyReadPosition:pubkeyReadPosition+10])[0]
inventoryHash = calculateInventoryHash(payload)
objectType = 'pubkey'
#todo: support v4 pubkeys
shared.inventory[inventoryHash] = (
objectType, pubkeyStreamNumber, payload, int(time.time()),'')
shared.inventorySets[pubkeyStreamNumber].add(inventoryHash)
with shared.printLock:
print 'broadcasting inv within API command disseminatePubkey with hash:', inventoryHash.encode('hex')
shared.broadcastToSendDataQueues((
streamNumber, 'advertiseobject', inventoryHash))
elif method == 'getMessageDataByDestinationHash' or method == 'getMessageDataByDestinationTag':
# Method will eventually be used by a particular Android app to
# select relevant messages. Do not yet add this to the api
# doc.
if len(params) != 1:
raise APIError(0, 'I need 1 parameter!')
requestedHash, = params
if len(requestedHash) != 32:
raise APIError(19, 'The length of hash should be 32 bytes (encoded in hex thus 64 characters).')
requestedHash = self._decode(requestedHash, "hex")
# This is not a particularly commonly used API function. Before we
# use it we'll need to fill out a field in our inventory database
# which is blank by default (first20bytesofencryptedmessage).
queryreturn = sqlQuery(
'''SELECT hash, payload FROM inventory WHERE tag = '' and objecttype = 'msg' ; ''')
with SqlBulkExecute() as sql:
for row in queryreturn:
hash01, payload = row
readPosition = 16 # Nonce length + time length
readPosition += decodeVarint(payload[readPosition:readPosition+10])[1] # Stream Number length
t = (payload[readPosition:readPosition+32],hash01)
sql.execute('''UPDATE inventory SET tag=? WHERE hash=?; ''', *t)
queryreturn = sqlQuery('''SELECT payload FROM inventory WHERE tag = ?''',
requestedHash)
data = '{"receivedMessageDatas":['
for row in queryreturn:
payload, = row
if len(data) > 25:
data += ','
data += json.dumps({'data':payload.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getPubkeyByHash':
# Method will eventually be used by a particular Android app to
# retrieve pubkeys. Please do not yet add this to the api docs.
if len(params) != 1:
raise APIError(0, 'I need 1 parameter!')
requestedHash, = params
if len(requestedHash) != 40:
raise APIError(19, 'The length of hash should be 20 bytes (encoded in hex thus 40 characters).')
requestedHash = self._decode(requestedHash, "hex")
queryreturn = sqlQuery('''SELECT transmitdata FROM pubkeys WHERE hash = ? ; ''', requestedHash)
data = '{"pubkey":['
for row in queryreturn:
transmitdata, = row
data += json.dumps({'data':transmitdata.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'clientStatus':
if len(shared.connectedHostsList) == 0:
networkStatus = 'notConnected'
elif len(shared.connectedHostsList) > 0 and not shared.clientHasReceivedIncomingConnections:
networkStatus = 'connectedButHaveNotReceivedIncomingConnections'
else:
networkStatus = 'connectedAndReceivingIncomingConnections'
return json.dumps({'networkConnections':len(shared.connectedHostsList),'numberOfMessagesProcessed':shared.numberOfMessagesProcessed, 'numberOfBroadcastsProcessed':shared.numberOfBroadcastsProcessed, 'numberOfPubkeysProcessed':shared.numberOfPubkeysProcessed, 'networkStatus':networkStatus, 'softwareName':'PyBitmessage','softwareVersion':shared.softwareVersion}, indent=4, separators=(',', ': '))
elif method == 'decodeAddress':
# Return a meaningful decoding of an address.
if len(params) != 1:
raise APIError(0, 'I need 1 parameter!')
address, = params
status, addressVersion, streamNumber, ripe = decodeAddress(address)
return json.dumps({'status':status, 'addressVersion':addressVersion,
'streamNumber':streamNumber, 'ripe':ripe.encode('base64')}, indent=4,
separators=(',', ': '))
else:
raise APIError(20, 'Invalid method: %s' % method)
def start(self):
_fixSocket()
daemon = BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'daemon')
try:
opts, args = getopt.getopt(
sys.argv[1:], "hcdtsa",
["help", "curses", "daemon", "test", "apitest"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, arg in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
state.enableGUI = False # run without a UI
elif opt in ("-c", "--curses"):
state.curses = True
elif opt in ("-t", "--test"):
state.testmode = daemon = True
state.enableGUI = False # run without a UI
elif opt in ("-a", "--apitest"):
from bmsxmlrpc.server import TestAPIThread
server = TestAPIThread()
server.start()
# is the application already running? If yes then exit.
if state.enableGUI and not state.curses and not depends.check_pyqt():
sys.exit(
'PyBitmessage requires PyQt unless you want'
' to run it as a daemon and interact with it'
' using the API. You can download PyQt from '
'http://www.riverbankcomputing.com/software/pyqt/download'
' or by searching Google for \'PyQt Download\'.'
' If you want to run in daemon mode, see '
'https://bitmessage.org/wiki/Daemon\n'
'You can also run PyBitmessage with'
' the new curses interface by providing'
' \'-c\' as a commandline argument.'
)
shared.thisapp = singleinstance("", daemon)
if daemon and not state.testmode:
with shared.printLock:
logger.warn('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_threading.set_thread_name("PyBitmessage")
state.dandelion = BMConfigParser().safeGetInt('network', 'dandelion')
# dandelion requires outbound connections, without them,
# stem objects will get stuck forever
if state.dandelion and not BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'sendoutgoingconnections'):
state.dandelion = 0
knownnodes.readKnownNodes()
# Not needed if objproc is disabled
if state.enableObjProc:
# Start the address generation thread
addressGeneratorThread = addressGenerator()
# close the main program even if there are threads left
addressGeneratorThread.daemon = True
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
# close the main program even if there are threads left
singleWorkerThread.daemon = True
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
# DON'T close the main program even if there are threads left.
# The closeEvent should command this thread to exit gracefully.
sqlLookup.daemon = False
sqlLookup.start()
Inventory() # init
# init, needs to be early because other thread may access it early
Dandelion()
# Enable object processor and SMTP only if objproc enabled
if state.enableObjProc:
# SMTP delivery thread
if daemon and BMConfigParser().safeGet(
"bitmessagesettings", "smtpdeliver", '') != '':
from class_smtpDeliver import smtpDeliver
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and BMConfigParser().safeGetBoolean(
"bitmessagesettings", "smtpd"):
from class_smtpServer import smtpServer
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
# DON'T close the main program even the thread remains.
# This thread checks the shutdown variable after processing
# each object.
objectProcessorThread.daemon = False
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
# close the main program even if there are threads left
singleCleanerThread.daemon = True
singleCleanerThread.start()
# Not needed if objproc disabled
if state.enableObjProc:
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
# API is also objproc dependent
if BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
from bmsxmlrpc.server import singleAPI
singleAPIThread = singleAPI()
# close the main program even if there are threads left
singleAPIThread.daemon = True
singleAPIThread.start()
# start network components if networking is enabled
if state.enableNetwork:
BMConnectionPool()
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(BMConfigParser().getint("threads", "receive")):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
connectToStream(1)
if BMConfigParser().safeGetBoolean(
'bitmessagesettings', 'upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
else:
# Populate with hardcoded value (same as connectToStream above)
state.streamsInWhichIAmParticipating.append(1)
if not daemon and state.enableGUI:
if state.curses:
if not depends.check_curses():
sys.exit()
logger.info('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
elif state.kivy:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
from bitmessagekivy.mpybit import NavigateApp
NavigateApp().run()
else:
import bitmessageqt
bitmessageqt.run()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
if daemon:
if state.testmode:
sleep(30)
# make testing
self.stop()
while state.shutdown == 0:
sleep(1)
def start(self):
_fixSocket()
daemon = BMConfigParser().safeGetBoolean('bitmessagesettings', 'daemon')
try:
opts, args = getopt.getopt(sys.argv[1:], "hcd",
["help", "curses", "daemon"])
except getopt.GetoptError:
self.usage()
sys.exit(2)
for opt, arg in opts:
if opt in ("-h", "--help"):
self.usage()
sys.exit()
elif opt in ("-d", "--daemon"):
daemon = True
elif opt in ("-c", "--curses"):
state.curses = True
shared.daemon = daemon
# is the application already running? If yes then exit.
shared.thisapp = singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_threading.set_thread_name("PyBitmessage")
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
Inventory() # init
Dandelion() # init, needs to be early because other thread may access it early
# SMTP delivery thread
if daemon and BMConfigParser().safeGet("bitmessagesettings", "smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and BMConfigParser().safeGetBoolean("bitmessagesettings", "smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if BMConfigParser().safeGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = BMConfigParser().get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
BMConnectionPool()
asyncoreThread = BMNetworkThread()
asyncoreThread.daemon = True
asyncoreThread.start()
for i in range(BMConfigParser().getint("threads", "receive")):
receiveQueueThread = ReceiveQueueThread(i)
receiveQueueThread.daemon = True
receiveQueueThread.start()
announceThread = AnnounceThread()
announceThread.daemon = True
announceThread.start()
state.invThread = InvThread()
state.invThread.daemon = True
state.invThread.start()
state.addrThread = AddrThread()
state.addrThread.daemon = True
state.addrThread.start()
state.downloadThread = DownloadThread()
state.downloadThread.daemon = True
state.downloadThread.start()
connectToStream(1)
if BMConfigParser().safeGetBoolean('bitmessagesettings','upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and BMConfigParser().safeGetBoolean('bitmessagesettings', 'daemon') == False:
if state.curses == False:
if not depends.check_pyqt():
print('PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon')
print('You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.')
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
BMConfigParser().remove_option('bitmessagesettings', 'dontconnect')
if daemon:
while state.shutdown == 0:
sleep(1)
def start(self, daemon=False):
_fixWinsock()
shared.daemon = daemon
# get curses flag
shared.curses = False
if '-c' in sys.argv:
shared.curses = True
# is the application already running? If yes then exit.
shared.thisapp = singleton.singleinstance("", daemon)
if daemon:
with shared.printLock:
print('Running as a daemon. Send TERM signal to end.')
self.daemonize()
self.setSignalHandler()
helper_bootstrap.knownNodes()
# Start the address generation thread
addressGeneratorThread = addressGenerator()
addressGeneratorThread.daemon = True # close the main program even if there are threads left
addressGeneratorThread.start()
# Start the thread that calculates POWs
singleWorkerThread = singleWorker()
singleWorkerThread.daemon = True # close the main program even if there are threads left
singleWorkerThread.start()
# Start the SQL thread
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
# SMTP delivery thread
if daemon and shared.safeConfigGet("bitmessagesettings", "smtpdeliver", '') != '':
smtpDeliveryThread = smtpDeliver()
smtpDeliveryThread.start()
# SMTP daemon thread
if daemon and shared.safeConfigGetBoolean("bitmessagesettings", "smtpd"):
smtpServerThread = smtpServer()
smtpServerThread.start()
# Start the thread that calculates POWs
objectProcessorThread = objectProcessor()
objectProcessorThread.daemon = False # DON'T close the main program even the thread remains. This thread checks the shutdown variable after processing each object.
objectProcessorThread.start()
# Start the cleanerThread
singleCleanerThread = singleCleaner()
singleCleanerThread.daemon = True # close the main program even if there are threads left
singleCleanerThread.start()
shared.reloadMyAddressHashes()
shared.reloadBroadcastSendersForWhichImWatching()
if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
try:
apiNotifyPath = shared.config.get(
'bitmessagesettings', 'apinotifypath')
except:
apiNotifyPath = ''
if apiNotifyPath != '':
with shared.printLock:
print('Trying to call', apiNotifyPath)
call([apiNotifyPath, "startingUp"])
singleAPIThread = singleAPI()
singleAPIThread.daemon = True # close the main program even if there are threads left
singleAPIThread.start()
connectToStream(1)
singleListenerThread = singleListener()
singleListenerThread.setup(selfInitiatedConnections)
singleListenerThread.daemon = True # close the main program even if there are threads left
singleListenerThread.start()
if shared.safeConfigGetBoolean('bitmessagesettings','upnp'):
import upnp
upnpThread = upnp.uPnPThread()
upnpThread.start()
if daemon == False and shared.safeConfigGetBoolean('bitmessagesettings', 'daemon') == False:
if shared.curses == False:
if not depends.check_pyqt():
print('PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon')
print('You can also run PyBitmessage with the new curses interface by providing \'-c\' as a commandline argument.')
sys.exit()
import bitmessageqt
bitmessageqt.run()
else:
if True:
# if depends.check_curses():
print('Running with curses')
import bitmessagecurses
bitmessagecurses.runwrapper()
else:
shared.config.remove_option('bitmessagesettings', 'dontconnect')
while True:
time.sleep(20)
