def test_modify(self):
"Verifies internal hook modify function"
clk = Bus(1, 0)
rst = Bus(1, 0)
d_bus = Bus(8, 0)
q_bus = Bus(8, 0)
reg = Register(8, clk, rst, d_bus, q_bus, 1)
tm = None
rm = reg.modify(tm)
self.assertTrue('error' in rm)
tm = {}
rm = reg.modify(tm)
self.assertTrue('error' in rm)
tm = {'state': '0'}
rm = reg.modify(tm)
self.assertTrue('error' in rm)
tm = {'state': -1}
rm = reg.modify(tm)
self.assertTrue('error' in rm)
tm = {'state': 256}
rm = reg.modify(tm)
self.assertTrue('error' in rm)
tm = {'state': 128}
rm = reg.modify(tm)
self.assertTrue('success' in rm and rm['success'])
reg.run()
self.assertTrue(q_bus.read() == 128)
def test_inspect(self):
"Verifies hook inspect for valid return"
clk = Bus(1, 0)
rst = Bus(1, 0)
d_bus = Bus(8, 0)
q_bus = Bus(8, 0)
reg = Register(8, clk, rst, d_bus, q_bus, 1)
ins = reg.inspect()
self.assertTrue(ins['type'] == 'register')
self.assertTrue(ins['size'] == 8)
self.assertTrue(ins['state'] == 1)
def __init__(self, c_in, v_in, n_in, z_in, rst, clk, en, c_out, v_out, n_out,
z_out, default_state=DEFAULT_STATE, edge_type=DEFAULT_LATCH_TYPE,
reset_type=DEFAULT_RESET_TYPE, enable_type=DEFAULT_ENABLE_TYPE):
"""
Constructor will check for valid parameters, exception thrown on invalid
Parameters
c_in: 1-bit input of 'c'
v_in: 1-bit input of 'v'
n_in: 1-bit input of 'n'
z_in: 1-bit input of 'z'
rst: Register reset
clk: Register clock
en: Register write enable
c_out: 1-bit output of 'c'
v_out: 1-bit output of 'v'
n_out: 1-bit output of 'n'
z_out: 1-bit output of 'z'
default_state: Initial 4-bit state of ALU Flag
edge_type: Clock state change to store flags
reset_type: Asynchronous reset to default_state value
enable_type: State to allow write to register
"""
if not isinstance(c_in, iBusRead) or not c_in.size() == 1:
raise TypeError('c in must be a 1-bit readable bus')
if not isinstance(v_in, iBusRead) or not v_in.size() == 1:
raise TypeError('v in must be a 1-bit readable bus')
if not isinstance(n_in, iBusRead) or not n_in.size() == 1:
raise TypeError('n in must be a 1-bit readable bus')
if not isinstance(z_in, iBusRead) or not z_in.size() == 1:
raise TypeError('z in must be a 1-bit readable bus')
if not isinstance(c_out, iBusWrite) or not c_out.size() == 1:
raise TypeError('c out must be a 1-bit readable bus')
if not isinstance(v_out, iBusWrite) or not v_out.size() == 1:
raise TypeError('v out must be a 1-bit readable bus')
if not isinstance(n_out, iBusWrite) or not n_out.size() == 1:
raise TypeError('n out must be a 1-bit readable bus')
if not isinstance(z_out, iBusWrite) or not z_out.size() == 1:
raise TypeError('z out must be a 1-bit readable bus')
self._flag_in = Bus(4)
self._join = BusJoin([c_in, v_in, n_in, z_in], self._flag_in)
self._flag_out = Bus(4)
self._subset = BusSubset(self._flag_out, [c_out, v_out, n_out, z_out],
[(0, 1), (1, 2), (2, 3), (3, 4)])
Register.__init__(self, 4, clk, rst, self._flag_in, self._flag_out,
default_state, edge_type, reset_type, en, enable_type)
def _generate_architecture():
"Generates a valid simple architecture for test"
hooks = OrderedDict([('clk', Clock(1)), ('rst', Reset(0))])
hooks.update({'d_bus': Bus(8, 0)})
hooks.update({'q_bus': Bus(8, 0)})
hooks.update({'const_1': Constant(8, 1)})
entities = OrderedDict([('clk', hooks['clk'])])
entities.update({
'reg':
Register(8,
hooks['clk'],
hooks['rst'],
hooks['d_bus'],
hooks['q_bus'],
default_state=255)
})
hooks.update({'reg': entities['reg']})
entities.update({
'adder':
Adder(8, hooks['q_bus'], hooks['const_1'], hooks['d_bus'])
})
arch = Architecture(0.25, hooks['clk'], hooks['rst'], None, hooks,
entities)
return arch, hooks, entities
def test_reset(self):
"Verifies reset behavior of component"
clk = Bus(1, 0)
rst = Bus(1, 0)
d_bus = Bus(8, 10)
q_bus = Bus(8, 0)
reg = Register(8, clk, rst, d_bus, q_bus, 0, Latch_Type.RISING_EDGE,
Logic_States.ACTIVE_HIGH)
clk.write(0)
reg.run()
self.assertTrue(q_bus.read() == 0)
clk.write(1)
reg.run()
self.assertTrue(q_bus.read() == 10)
reg.on_reset()
reg.run()
self.assertTrue(q_bus.read() == 0)
def test_clear(self):
"Tests memory's clear method"
clk = Bus(1, 0)
rst = Bus(1, 0)
d_bus = Bus(8, 0)
q_bus = Bus(8, 0)
reg = Register(8, clk, rst, d_bus, q_bus, 1)
#write data
reg.modify({'state': 0xFF})
msg = reg.inspect()
self.assertEqual(msg['state'], 0xFF)
#clear data
msg = reg.clear()
self.assertTrue('success' in msg)
#validate clear
msg = reg.inspect()
self.assertEqual(msg['state'], 1)
def __init__(self, num_reg, reg_size, clock, reset, write_addr, write_data,
read_addrs, read_datas, enable=None, default_state=DEFAULT_STATE,
edge_type=DEFAULT_LATCH_TYPE,
reset_type=DEFAULT_RESET_TYPE,
enable_type=DEFAULT_ENABLE_TYPE):
"""
Constructor will check for valid parameters, exception thrown on invalid
Parameters:
num_reg : number of registers in register file
reg_size : bit size of registers in register file
clock : clock bus of size 1 for register file
reset : reset bus of size 1 for register file
write_addr : write address of iBusRead size appropriate for num_reg
write_data : write address of iBusRead size appropriate for reg_size
read_addr : read address array of iBusRead with no more than num_reg
each bus must be of size appropriate for reg selection
read_data : read data array of iBusWrite with no more than num_reg
each bus must have size equal to reg_size
enable : bit enabling write behavior for specified registers
(Optional) if not specified then assumed active
default_state : initial and reset state that registers take on
edge_type : Latching type for registers (all must be same)
reset_type : logic state to cause reset event
enable_type : logic state to allow write behavior
"""
# configuration
if not isinstance(reg_size, int) or reg_size <= 0:
raise TypeError('Number of registers must be valid integer')
elif not isinstance(num_reg, int) or num_reg <= 0:
raise TypeError('Bit-width must be valid')
elif not Latch_Type.valid(edge_type):
raise ValueError('Invalid latch edge type')
elif not Logic_States.valid(reset_type):
raise ValueError('Invalid active reset type')
elif not Logic_States.valid(enable_type):
raise ValueError('Invalid active enable type')
self._reg_size = reg_size
self._num_reg = num_reg
self._edge_type = edge_type
self._reset_type = reset_type
self._enable_type = enable_type
self._default_state = default_state
# generate necessary parameters that buses must fit
if num_reg == 0:
self._necessary_length = 0
elif num_reg < 2:
self._necessary_length = 1
else: # len > 2
self._necessary_length = int(math.floor(math.log(num_reg - 1, 2) + 1))
self._necessary_size = self._reg_size
# external connections
if not isinstance(clock, iBusRead) or not clock.size() == 1:
raise TypeError('Clock bus must be valid')
elif not isinstance(reset, iBusRead) or not reset.size() == 1:
raise TypeError('Reset bus must be valid')
elif not isinstance(enable, iBusRead) or not enable.size() == 1:
raise TypeError('Write enable bus must be readable')
elif not isinstance(write_addr, iBusRead) or not write_addr.size() == self._necessary_length:
raise TypeError('Write address bus must be readable')
elif not isinstance(write_data, iBusRead) or not write_data.size() == self._necessary_size:
raise TypeError('Write data bus must be readable')
elif not isinstance(read_addrs, list) or not isinstance(read_datas, list):
raise TypeError('Read buses lists must be list')
elif not (len(read_addrs) == len(read_datas)) or len(read_addrs) <= 0 or len(read_datas) <= 0:
raise TypeError('Read buses must having matching size greater than zero')
elif not all((isinstance(x, iBusRead) and x.size() == self._necessary_length) for x in read_addrs):
raise TypeError('Read address buses must be have correct size')
elif not all((isinstance(x, iBusWrite) and x.size() == self._necessary_size) for x in read_datas):
raise TypeError('Read data buses must be have correct size')
self._clock = clock
self._reset = reset
self._enable = enable
self._waddr = write_addr
self._wdata = write_data
self._raddrs = read_addrs
self._rdatas = read_datas
# internal structure
self._regs = []
self._ens = []
self._datas = []
for i in range(num_reg):
en = Bus(1, 0)
da = Bus(reg_size, 0)
self._ens.append(en)
self._datas.append(da)
self._regs.append(Register(reg_size, clock, reset, write_data, da,
default_state, edge_type, reset_type, en,
Logic_States.ACTIVE_HIGH))
def generate_single_cycle_architecture():
"Illustrates the necessary process to construct an architecture"
# define system resources
clk = Clock(10, 0)
rst = Reset(0)
hooks = OrderedDict([('clk', clk), ('rst', rst)])
# define input hooks and constants
hooks.update({'const8': Constant(32, 8)})
hooks.update({'const4': Constant(32, 4)})
hooks.update({'const14': Constant(4, 14)})
# define buses
hooks.update({'pc': Bus(32, 0)})
hooks.update({'pc8': Bus(32, 0)})
hooks.update({'pc4': Bus(32, 0)})
hooks.update({'instr': Bus(32, 0)})
hooks.update({'instr_23_0': Bus(24, 0)})
hooks.update({'instr_19_16': Bus(4, 0)})
hooks.update({'instr_3_0': Bus(4, 0)})
hooks.update({'instr_15_12': Bus(4, 0)})
hooks.update({'instr_11_8': Bus(4, 0)})
hooks.update({'instr_31_28': Bus(4, 0)})
hooks.update({'instr_27_26': Bus(2, 0)})
hooks.update({'instr_25_20': Bus(6, 0)})
hooks.update({'instr_4_4': Bus(1, 0)})
hooks.update({'imm32': Bus(32, 0)})
hooks.update({'ra1': Bus(4, 0)})
hooks.update({'ra2': Bus(4, 0)})
hooks.update({'ra3': Bus(4, 0)})
hooks.update({'rwd': Bus(32, 0)})
hooks.update({'rd1': Bus(32, 0)})
hooks.update({'rd2': Bus(32, 0)})
hooks.update({'alub': Bus(32, 0)})
hooks.update({'branch': Bus(32, 0)})
hooks.update({'aluf': Bus(32, 0)})
hooks.update({'aluc': Bus(1, 0)})
hooks.update({'aluv': Bus(1, 0)})
hooks.update({'alun': Bus(1, 0)})
hooks.update({'aluz': Bus(1, 0)})
hooks.update({'aluflag': Bus(4, 0)})
hooks.update({'flag': Bus(4, 0)})
hooks.update({'c': Bus(1, 0)})
hooks.update({'v': Bus(1, 0)})
hooks.update({'n': Bus(1, 0)})
hooks.update({'z': Bus(1, 0)})
hooks.update({'memrd': Bus(32, 0)})
hooks.update({'wdb': Bus(32, 0)})
hooks.update({'pcwb': Bus(32, 0)})
# control signals
hooks.update({'pcwr': Bus(1, 0)})
hooks.update({'regsa': Bus(1, 0)})
hooks.update({'regdst': Bus(2, 0)})
hooks.update({'regwrs': Bus(2, 0)})
hooks.update({'wdbs': Bus(1, 0)})
hooks.update({'regwr': Bus(1, 0)})
hooks.update({'exts': Bus(2, 0)})
hooks.update({'alu8rcb': Bus(1, 0)})
hooks.update({'alus': Bus(4, 0)})
hooks.update({'aluflagwr': Bus(1, 0)})
hooks.update({'memwr': Bus(1, 0)})
hooks.update({'regsrc': Bus(1, 0)})
hooks.update({'pcsrc': Bus(2, 0)})
# generate components
# FETCH
entities = OrderedDict([('clk', clk)])
entities.update({'pc_reg': Register(32, hooks['clk'], hooks['rst'],
hooks['pcwb'], hooks['pc'], 0, enable=hooks['pcwr'],
edge_type=Latch_Type.FALLING_EDGE)})
entities.update({'add8': Adder(32, hooks['pc'], hooks['const8'], hooks['pc8'])})
entities.update({'add4': Adder(32, hooks['pc'], hooks['const4'], hooks['pc4'])})
entities.update({'progmem': ProgramMemory(hooks['pc'], hooks['rst'], hooks['instr'])})
# DECODE
entities.update({'instr_subset': BusSubset(hooks['instr'],
[hooks['instr_23_0'], hooks['instr_19_16'],
hooks['instr_3_0'], hooks['instr_15_12'],
hooks['instr_11_8'], hooks['instr_31_28'],
hooks['instr_27_26'], hooks['instr_25_20'],
hooks['instr_4_4']],
[(0, 24), (16, 20), (0, 4), (12, 16), (8, 12), (28, 32), (26, 28), (20, 26), (4, 5)])})
entities.update({'controller': ControllerSingleCycle(hooks['instr_31_28'],
hooks['instr_27_26'], hooks['instr_25_20'],
hooks['instr_15_12'], hooks['instr_4_4'],
hooks['c'], hooks['v'], hooks['n'], hooks['z'],
hooks['pcsrc'], hooks['pcwr'], hooks['regsa'],
hooks['regdst'], hooks['regwrs'], hooks['regwr'],
hooks['exts'], hooks['alu8rcb'], hooks['alus'],
hooks['aluflagwr'], hooks['memwr'], hooks['regsrc'],
hooks['wdbs'])})
entities.update({'ra1_mux': Mux(4, [hooks['instr_3_0'], hooks['instr_19_16']],
hooks['regsa'], hooks['ra1'])})
entities.update({'ra2_mux': Mux(4, [hooks['instr_11_8'], hooks['instr_3_0'],
hooks['instr_15_12']], hooks['regdst'], hooks['ra2'])})
entities.update({'ra3_mux': Mux(4, [hooks['instr_19_16'], hooks['instr_15_12'],
hooks['const14']], hooks['regwrs'], hooks['ra3'])})
entities.update({'rwd_mux': Mux(32, [hooks['wdb'], hooks['pc4']], hooks['wdbs'],
hooks['rwd'])})
entities.update({'extimm': Extender(hooks['instr_23_0'], hooks['exts'],
hooks['imm32'])})
entities.update({'regfile': RegisterFile(hooks['clk'], hooks['rst'],
hooks['regwr'], hooks['rwd'], hooks['ra1'], hooks['ra2'],
hooks['ra3'], hooks['rd1'], hooks['rd2'])})
# EXECUTE
entities.update({'alu_mux': Mux(32, [hooks['imm32'], hooks['rd2']],
hooks['alu8rcb'], hooks['alub'])})
entities.update({'add_br': Adder(32, hooks['pc8'], hooks['imm32'], hooks['branch'])})
entities.update({'alu': Alu(hooks['rd1'], hooks['alub'], hooks['alus'],
hooks['aluf'], hooks['aluc'], hooks['aluv'], hooks['alun'],
hooks['aluz'])})
entities.update({'aluflag_reg': ALUFlagRegister(hooks['aluc'], hooks['aluv'], hooks['alun'],
hooks['aluz'], hooks['rst'], hooks['clk'],
hooks['aluflagwr'], hooks['c'], hooks['v'],
hooks['n'], hooks['z'])})
# MEMORY & WRITE-BACK
entities.update({'datamem': DataMemory(hooks['aluf'], hooks['rd2'], hooks['memwr'],
hooks['rst'], hooks['clk'], hooks['memrd'])})
entities.update({'wdb_mux': Mux(32, [hooks['memrd'], hooks['aluf']],
hooks['regsrc'], hooks['wdb'])})
entities.update({'pcwb_mux': Mux(32, [hooks['branch'], hooks['pc4'], hooks['wdb']],
hooks['pcsrc'], hooks['pcwb'])})
# place memory (Internal) hooks into hook list
hooks.update({'pc_reg': entities['pc_reg']})
hooks.update({'progmem': entities['progmem']})
hooks.update({'regfile': entities['regfile']})
hooks.update({'aluflag_reg': entities['aluflag_reg']})
hooks.update({'datamem': entities['datamem']})
hooks.update({'controller': entities['controller']})
# generate simulatable architecture
arch = Architecture(0.0001, clk, rst, None, hooks, entities)
return arch, hooks
def test_rising_edge(self):
"Verifies rising edge capture behavior"
clk = Bus(1, 0)
rst = Bus(1, 0)
d_bus = Bus(8, 10)
q_bus = Bus(8, 0)
reg = Register(8, clk, rst, d_bus, q_bus, 0, Latch_Type.RISING_EDGE,
Logic_States.ACTIVE_HIGH)
reg.run()
self.assertTrue(q_bus.read() == 0)
d_bus.write(15)
reg.on_rising_edge()
reg.run()
self.assertTrue(q_bus.read() == 15)
d_bus.write(25)
reg.on_falling_edge()
reg.run()
self.assertTrue(q_bus.read() == 15)
def test_run(self):
"Verifies correct time based simulation"
clk = Bus(1, 0)
rst = Bus(1, 0)
d_bus = Bus(8, 10)
q_bus = Bus(8, 0)
en = Bus(1, 0)
reg = Register(8, clk, rst, d_bus, q_bus, 0, Latch_Type.RISING_EDGE,
Logic_States.ACTIVE_HIGH, en, Logic_States.ACTIVE_HIGH)
en.write(0)
clk.write(0)
reg.run()
self.assertTrue(q_bus.read() == 0)
en.write(1)
clk.write(0)
reg.run()
self.assertTrue(q_bus.read() == 0)
en.write(0)
clk.write(1)
reg.run()
self.assertTrue(q_bus.read() == 0)
en.write(1)
clk.write(1)
reg.run()
self.assertTrue(q_bus.read() == 0)
clk.write(0)
reg.run()
self.assertTrue(q_bus.read() == 0)
clk.write(1)
reg.run()
self.assertTrue(q_bus.read() == 10)
d_bus.write(15)
clk.write(0)
reg.run()
self.assertTrue(q_bus.read() == 10)
rst.write(1)
clk.write(1)
reg.run()
self.assertTrue(q_bus.read() == 0)
def test_constructor(self):
"Constructor with valid and invalid configuration"
clk = Bus(1, 0)
rst = Bus(1, 0)
d_bus = Bus(2, 1)
q_bus = Bus(2, 0)
en = Bus(1, 0)
with self.assertRaises(TypeError):
r = Register('0', clk, rst, d_bus)
with self.assertRaises(TypeError):
r = Register(0, clk, rst, d_bus)
with self.assertRaises(TypeError):
r = Register(2, clk, rst, d_bus, q_bus, '0')
with self.assertRaises(TypeError):
r = Register(2, clk, rst, d_bus, q_bus, -1)
with self.assertRaises(TypeError):
r = Register(2, clk, rst, d_bus, q_bus, 4)
with self.assertRaises(TypeError):
r = Register(2, 'clk', rst, d_bus, q_bus)
with self.assertRaises(ValueError):
c = Bus(2)
r = Register(2, c, rst, d_bus, q_bus)
with self.assertRaises(TypeError):
r = Register(2, clk, 'rst', d_bus, q_bus)
with self.assertRaises(ValueError):
rs = Bus(2)
r = Register(2, clk, rs, d_bus, q_bus)
with self.assertRaises(TypeError):
r = Register(2, clk, rst, 'd_bus', q_bus)
with self.assertRaises(ValueError):
d = Bus(3)
r = Register(2, clk, rst, d, q_bus)
with self.assertRaises(TypeError):
r = Register(2, clk, rst, d_bus, q_bus, enable='0')
with self.assertRaises(ValueError):
e = Bus(3)
r = Register(2, clk, rst, d, q_bus, enable=e)
with self.assertRaises(TypeError):
r = Register(2, clk, rst, d_bus, 'q_bus')
with self.assertRaises(ValueError):
q = Bus(3)
r = Register(2, clk, rst, d_bus, q)
with self.assertRaises(ValueError):
r = Register(2, clk, rst, d_bus, q_bus, edge_type=5)
with self.assertRaises(ValueError):
r = Register(2, clk, rst, d_bus, q_bus, reset_type=5)
with self.assertRaises(ValueError):
r = Register(2, clk, rst, d_bus, q_bus, enable_type=5)
reg = Register(2, clk, rst, d_bus, q_bus, 0, Latch_Type.BOTH_EDGE,
Logic_States.ACTIVE_LOW, en, Logic_States.ACTIVE_LOW)
def test_constructor(self):
"""
Test constructor with a simple architecture along with invalid cases.
"""
hooks = OrderedDict([('clk', Clock(1)), ('rst', Reset(0))])
hooks.update({'d_bus': Bus(8, 0)})
hooks.update({'q_bus': Bus(8, 0)})
hooks.update({'const_1': Constant(8, 1)})
entities = OrderedDict([('clk', hooks['clk'])])
entities.update({
'reg':
Register(8,
hooks['clk'],
hooks['rst'],
hooks['d_bus'],
hooks['q_bus'],
default_state=255)
})
hooks.update({'reg': entities['reg']})
entities.update({
'adder':
Adder(8, hooks['q_bus'], hooks['const_1'], hooks['d_bus'])
})
# time step must be positive
with self.assertRaises(ValueError):
arch = Architecture(0, hooks['clk'], hooks['rst'], None, hooks,
entities)
# time step must not be greater than logic step
with self.assertRaises(ValueError):
arch = Architecture(0.6, hooks['clk'], hooks['rst'], None, hooks,
entities)
# provide a not Clock type clock
with self.assertRaises(TypeError):
arch = Architecture(0.25, Bus(1), hooks['rst'], None, hooks,
entities)
# provide a not Reset type reset
with self.assertRaises(TypeError):
arch = Architecture(0.25, hooks['clk'], Bus(1), None, hooks,
entities)
# provide wrong data structure for hooks
with self.assertRaises(TypeError):
arch = Architecture(0.25, Clock(1), Reset(), None, [],
OrderedDict())
# provide wrong data structure for entities
with self.assertRaises(TypeError):
arch = Architecture(0.25, Clock(1), Reset(), None, OrderedDict(),
{})
# provide wrong data structure for entities
with self.assertRaises(TypeError):
arch = Architecture(0.25, Clock(1), Reset(), None, OrderedDict(),
[])
# construct valid empty architecture
arch = Architecture(0.25, Clock(1), Reset(), None, OrderedDict(),
OrderedDict())
# construct valid architecture with contents
arch = Architecture(0.25, hooks['clk'], hooks['rst'], None, hooks,
entities)
def generate_pipeline_architecture():
"Illustrates the necessary process to construct an architecture"
########## define system resources ##########
clk = Clock(10, 0)
rst = Reset(0)
hooks = OrderedDict([('clk', clk), ('rst', rst)])
########## define input hooks and constants ##########
hooks.update({'const4': Constant(32, 4)})
hooks.update({'const8': Constant(32, 8)})
hooks.update({'const14': Constant(4, 14)})
########## define buses ##########
hooks.update({'pc': Bus(32, 0)})
hooks.update({'pc4f': Bus(32, 0)})
hooks.update({'pc4d': Bus(32, 0)})
hooks.update({'pc4e': Bus(32, 0)})
hooks.update({'pc4m': Bus(32, 0)})
hooks.update({'pc4w': Bus(32, 0)})
hooks.update({'pc8f': Bus(32, 0)})
hooks.update({'pc8d': Bus(32, 0)})
hooks.update({'braddr': Bus(32, 0)})
hooks.update({'nextaddr': Bus(32, 0)})
hooks.update({'instrf': Bus(32, 0)})
hooks.update({'instrd': Bus(32, 0)})
hooks.update({'instrd_31_28': Bus(4, 0)})
hooks.update({'instrd_27_26': Bus(2, 0)})
hooks.update({'instrd_25_20': Bus(6, 0)})
hooks.update({'instrd_19_16': Bus(4, 0)})
hooks.update({'instrd_15_12': Bus(4, 0)})
hooks.update({'instrd_11_8': Bus(4, 0)})
hooks.update({'instrd_4': Bus(1, 0)})
hooks.update({'instrd_3_0': Bus(4, 0)})
hooks.update({'instrd_23_0': Bus(24, 0)})
hooks.update({'imm32d': Bus(32, 0)})
hooks.update({'imm32e': Bus(32, 0)})
hooks.update({'rdm': Bus(32, 0)})
hooks.update({'rdw': Bus(32, 0)})
hooks.update({'rd1': Bus(32, 0)})
hooks.update({'rd2': Bus(32, 0)})
hooks.update({'rd1d': Bus(32, 0)})
hooks.update({'rd2d': Bus(32, 0)})
hooks.update({'rd1e': Bus(32, 0)})
hooks.update({'rd2e': Bus(32, 0)})
hooks.update({'rd2m': Bus(32, 0)})
hooks.update({'ra1d': Bus(4, 0)})
hooks.update({'ra2d': Bus(4, 0)})
hooks.update({'ra3d': Bus(4, 0)})
hooks.update({'ra1e': Bus(4, 0)})
hooks.update({'ra2e': Bus(4, 0)})
hooks.update({'ra3e': Bus(4, 0)})
hooks.update({'ra3m': Bus(4, 0)})
hooks.update({'ra3w': Bus(4, 0)})
hooks.update({'fe': Bus(32, 0)})
hooks.update({'fm': Bus(32, 0)})
hooks.update({'fw': Bus(32, 0)})
hooks.update({'alub': Bus(32, 0)})
hooks.update({'aluc': Bus(1, 0)})
hooks.update({'aluv': Bus(1, 0)})
hooks.update({'alun': Bus(1, 0)})
hooks.update({'aluz': Bus(1, 0)})
hooks.update({'c': Bus(1, 0)})
hooks.update({'v': Bus(1, 0)})
hooks.update({'n': Bus(1, 0)})
hooks.update({'z': Bus(1, 0)})
hooks.update({'aluflag': Bus(4, 0)})
hooks.update({'flag': Bus(4, 0)})
hooks.update({'data': Bus(32, 0)})
hooks.update({'wd': Bus(32, 0)})
hooks.update({'wd3': Bus(32, 0)})
########## control signals ##########
# decode stage
hooks.update({'pcsrcd': Bus(2, 0)})
hooks.update({'pcwrd': Bus(1, 0)})
hooks.update({'regsad': Bus(1, 0)})
hooks.update({'regdstd': Bus(2, 0)})
hooks.update({'regwrsd': Bus(2, 0)})
hooks.update({'regwrd': Bus(1, 0)})
hooks.update({'extsd': Bus(2, 0)})
hooks.update({'alusrcbd': Bus(1, 0)})
hooks.update({'alusd': Bus(4, 0)})
hooks.update({'aluflagwrd': Bus(1, 0)})
hooks.update({'memwrd': Bus(1, 0)})
hooks.update({'regsrcd': Bus(1, 0)})
hooks.update({'wd3sd': Bus(1, 0)})
# execute stage
hooks.update({'regwre': Bus(1, 0)})
hooks.update({'alusrcbe': Bus(1, 0)})
hooks.update({'aluse': Bus(4, 0)})
hooks.update({'aluflagwre': Bus(1, 0)})
hooks.update({'memwre': Bus(1, 0)})
hooks.update({'regsrce': Bus(1, 0)})
hooks.update({'wd3se': Bus(1, 0)})
# memory stage
hooks.update({'regwrm': Bus(1, 0)})
hooks.update({'memwrm': Bus(1, 0)})
hooks.update({'regsrcm': Bus(1, 0)})
hooks.update({'wd3sm': Bus(1, 0)})
# write back stage
hooks.update({'regwrw': Bus(1, 0)})
hooks.update({'regsrcw': Bus(1, 0)})
hooks.update({'wd3sw': Bus(1, 0)})
########## hazard control signals ##########
hooks.update({'fwda': Bus(3, 0)})
hooks.update({'fwdb': Bus(3, 0)})
hooks.update({'fwds': Bus(1, 0)})
hooks.update({'stallf': Bus(1, 0)})
hooks.update({'flushf': Bus(1, 0)})
hooks.update({'flushd': Bus(1, 0)})
########## generate components ##########
entities = OrderedDict([('clk', clk)])
# memwb
entities.update({
'memwb':
Memwb(hooks['pc4m'], hooks['regwrm'], hooks['regsrcm'], hooks['wd3sm'],
hooks['fm'], hooks['rdm'], hooks['ra3m'], hooks['clk'],
hooks['pc4w'], hooks['regwrw'], hooks['regsrcw'], hooks['wd3sw'],
hooks['fw'], hooks['rdw'], hooks['ra3w'])
})
# exmem
entities.update({
'exmem':
Exmem(hooks['pc4e'], hooks['regwre'], hooks['memwre'],
hooks['regsrce'], hooks['wd3se'], hooks['rd2'], hooks['fe'],
hooks['ra3e'], hooks['clk'], hooks['pc4m'], hooks['regwrm'],
hooks['memwrm'], hooks['regsrcm'], hooks['wd3sm'], hooks['fm'],
hooks['rd2m'], hooks['ra3m'])
})
# idex
entities.update({
'idex':
Idex(hooks['pc4d'], hooks['regwrd'], hooks['alusrcbd'], hooks['alusd'],
hooks['aluflagwrd'], hooks['memwrd'], hooks['regsrcd'],
hooks['wd3sd'], hooks['rd1d'], hooks['rd2d'], hooks['imm32d'],
hooks['ra1d'], hooks['ra2d'], hooks['ra3d'], hooks['flushd'],
hooks['clk'], hooks['pc4e'], hooks['regwre'], hooks['alusrcbe'],
hooks['aluse'], hooks['aluflagwre'], hooks['memwre'],
hooks['regsrce'], hooks['wd3se'], hooks['rd1e'], hooks['rd2e'],
hooks['imm32e'], hooks['ra1e'], hooks['ra2e'], hooks['ra3e'])
})
# ifid
entities.update({
'ifid':
Ifid(hooks['pc4f'], hooks['pc8f'], hooks['instrf'], hooks['stallf'],
hooks['flushf'], hooks['clk'], hooks['pc4d'], hooks['pc8d'],
hooks['instrd'])
})
# fetch
entities.update({
'addr_mux':
Mux(32, [hooks['braddr'], hooks['pc4d'], hooks['fe']], hooks['pcsrcd'],
hooks['nextaddr'])
})
entities.update({
'pc_reg':
Register(32,
hooks['clk'],
hooks['rst'],
hooks['nextaddr'],
hooks['pc'],
0,
enable=hooks['pcwrd'])
})
entities.update(
{'add8': Adder(32, hooks['pc'], hooks['const8'], hooks['pc8f'])})
entities.update(
{'add4': Adder(32, hooks['pc'], hooks['const4'], hooks['pc4f'])})
entities.update(
{'progmem': ProgramMemory(hooks['pc'], hooks['rst'], hooks['instrf'])})
# decode
entities.update({
'instr_subset':
BusSubset(hooks['instrd'], [
hooks['instrd_23_0'], hooks['instrd_31_28'], hooks['instrd_27_26'],
hooks['instrd_25_20'], hooks['instrd_19_16'],
hooks['instrd_15_12'], hooks['instrd_11_8'], hooks['instrd_4'],
hooks['instrd_3_0']
], [(0, 24), (28, 32), (26, 28), (20, 26), (16, 20), (12, 16), (8, 12),
(4, 5), (0, 4)])
})
entities.update({
'controller':
ControllerPipeline(hooks['instrd_31_28'], hooks['instrd_27_26'],
hooks['instrd_25_20'], hooks['instrd_15_12'],
hooks['instrd_4'], hooks['c'], hooks['v'],
hooks['n'], hooks['z'], hooks['stallf'],
hooks['pcsrcd'], hooks['pcwrd'], hooks['regsad'],
hooks['regdstd'], hooks['regwrsd'], hooks['regwrd'],
hooks['extsd'], hooks['alusrcbd'], hooks['alusd'],
hooks['aluflagwrd'], hooks['memwrd'],
hooks['regsrcd'], hooks['wd3sd'])
})
entities.update({
'ra1_mux':
Mux(4, [hooks['instrd_3_0'], hooks['instrd_19_16']], hooks['regsad'],
hooks['ra1d'])
})
entities.update({
'ra2_mux':
Mux(4,
[hooks['instrd_11_8'], hooks['instrd_3_0'], hooks['instrd_15_12']],
hooks['regdstd'], hooks['ra2d'])
})
entities.update({
'ra3_mux':
Mux(4,
[hooks['instrd_19_16'], hooks['instrd_15_12'], hooks['const14']],
hooks['regwrsd'], hooks['ra3d'])
})
entities.update({
'extimm':
Extender(hooks['instrd_23_0'], hooks['extsd'], hooks['imm32d'])
})
entities.update({
'add_branch':
Adder(32, hooks['pc8d'], hooks['imm32d'], hooks['braddr'])
})
entities.update({
'regfile':
RegisterFile(hooks['clk'],
hooks['rst'],
hooks['regwrw'],
hooks['wd'],
hooks['ra1d'],
hooks['ra2d'],
hooks['ra3w'],
hooks['rd1d'],
hooks['rd2d'],
edge_type=Latch_Type.FALLING_EDGE)
})
# execute
entities.update({
'hazard_controller':
HazardController(hooks['ra1e'], hooks['ra2e'], hooks['ra3e'],
hooks['ra3m'], hooks['ra3w'], hooks['regwrm'],
hooks['regwrw'], hooks['regsrcm'], hooks['regsrcw'],
hooks['memwrm'], hooks['pcsrcd'], hooks['fwda'],
hooks['fwdb'], hooks['fwds'], hooks['stallf'],
hooks['flushf'], hooks['flushd'])
})
entities.update({
'fwda_mux':
Mux(32, [
hooks['rd1e'], hooks['fw'], hooks['fm'], hooks['rdm'], hooks['rdw']
], hooks['fwda'], hooks['rd1'])
})
entities.update({
'fwdb_mux':
Mux(32, [
hooks['rd2e'], hooks['fw'], hooks['fm'], hooks['rdm'], hooks['rdw']
], hooks['fwdb'], hooks['rd2'])
})
entities.update({
'alu_mux':
Mux(32, [hooks['imm32e'], hooks['rd2']], hooks['alusrcbe'],
hooks['alub'])
})
entities.update({
'alu':
Alu(hooks['rd1'], hooks['alub'], hooks['aluse'], hooks['fe'],
hooks['aluc'], hooks['aluv'], hooks['alun'], hooks['aluz'])
})
entities.update({
'aluflag_join':
BusJoin([hooks['aluc'], hooks['aluv'], hooks['alun'], hooks['aluz']],
hooks['aluflag'])
})
entities.update({
'aluflag_reg':
Register(4,
hooks['clk'],
hooks['rst'],
hooks['aluflag'],
hooks['flag'],
enable=hooks['aluflagwre'])
})
entities.update({
'flag_subset':
BusSubset(hooks['flag'],
[hooks['c'], hooks['v'], hooks['n'], hooks['z']], [(0, 1),
(1, 2),
(2, 3),
(3, 4)])
})
# writeback
entities.update({
'wd3_mux':
Mux(32, [hooks['rdw'], hooks['fw']], hooks['regsrcw'], hooks['wd3'])
})
entities.update({
'rwd_mux':
Mux(32, [hooks['wd3'], hooks['pc4w']], hooks['wd3sw'], hooks['wd'])
})
# memory
entities.update({
'fwds_mux':
Mux(32, [hooks['rd2m'], hooks['wd3']], hooks['fwds'], hooks['data'])
})
entities.update({
'datamem':
DataMemory(hooks['fm'], hooks['data'], hooks['memwrm'], hooks['rst'],
hooks['clk'], hooks['rdm'])
})
# place memory (Internal) hooks into hook list
hooks.update({'pc_reg': entities['pc_reg']})
hooks.update({'progmem': entities['progmem']})
hooks.update({'regfile': entities['regfile']})
hooks.update({'aluflag_reg': entities['aluflag_reg']})
hooks.update({'datamem': entities['datamem']})
hooks.update({'controller': entities['controller']})
#hooks.update({'hazard_controller': entities['hazard_controller']})
hooks.update({'ifid': entities['ifid']})
hooks.update({'idex': entities['idex']})
hooks.update({'exmem': entities['exmem']})
hooks.update({'memwb': entities['memwb']})
# generate simulatable architecture
arch = Architecture(0.0001, clk, rst, None, hooks, entities)
return arch, hooks
#tf.write(']}')
#tf.close()
quit()
# websocket prototype
clk = Clock(10, 0)
rst = Reset(1)
b0 = Bus(8, 0)
b1 = Bus(8, 0)
c1 = Constant(8, 1)
reg = Register(8, clk, rst, b0, b1)
add = Adder(8, c1, b1, b0)
hooks = OrderedDict([('clk', clk), ('rst', rst), ('b0', b0), ('b1', b1),
('c1', c1)])
entities = OrderedDict([('clk', clk), ('add', add), ('reg', reg)])
arch = Architecture(0.0001, clk, rst, hooks, entities)
msg_inspect = {'inspect': ['clk', 'rst', 'b0', 'b1', 'c1']}
async def interface_to_frontend(websocket, path):
async for message in websocket:
msg = json.loads(message)
retMsg = {}
def run(self, time=None):
"Timestep handler function clocks data into register and asserts output"
self._join.run(time)
Register.run(self, time)
self._subset.run(time)
