def extract_bmp(self, numbmp, width, height):
if not self.bmp_dict.has_key(numbmp):
return
chunk = self.bmp_dict[numbmp]
palflag = ord(chunk.data[0x36])
[bmpsize] = struct.unpack('<L', chunk.data[42:46])
[bmpstart] = struct.unpack('<L', chunk.data[50:54])
numcol = (bmpstart - 82) / 3
if palflag == 5:
numcol = 256
bmpstart2 = numcol * 4 + 54
bmpstart2 = struct.pack('<L', bmpstart2)
if palflag == 3: #CMYK image
self.bmpbuf = chunk.data[bmpstart + 40:]
self.extracted_image = Image.fromstring('CMYK', (width, height),
self.bmpbuf, 'raw', 'CMYK',
0, -1)
elif palflag == 5: #Grayscale image
self.bmpbuf = chunk.data[bmpstart + 40:]
bytes = math.ceil(width / 2.0) * 2
self.extracted_image = Image.fromstring('L', (width, height),
self.bmpbuf, 'raw', 'L',
bytes, -1)
elif palflag == 6: #Mono image
bmpstart2 = numcol * 4 + 66
bmpstart2 = struct.pack('<L', bmpstart2)
self.bmpbuf = 'BM' + chunk.data[42:50] + bmpstart2[
0:4] + '\x28\x00\x00\x00'
self.bmpbuf += chunk.data[62:72] + chunk.data[74:78]
self.bmpbuf += '\x00\x00' + chunk.data[82:90] + '\x00\x00\x00\x00'
self.bmpbuf += '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
self.bmpbuf += chunk.data[bmpstart + 40:]
self.extracted_image = Image.open(StringIO.StringIO(self.bmpbuf))
self.extracted_image.load()
# elif palflag == 1: #RGB
# print 'width, height', (width, height)
# self.bmpbuf=chunk.data[bmpstart+40:]
# self.extracted_image = Image.fromstring('RGB', (width, height), self.bmpbuf, 'raw', 'BGR', 0, -1)
else:
self.bmpbuf = 'BM' + chunk.data[42:50] + bmpstart2[
0:4] + '\x28\x00\x00\x00'
self.bmpbuf += chunk.data[62:72] + chunk.data[74:78]
self.bmpbuf += '\x00\x00' + chunk.data[82:90] + '\x00\x00\x00\x00'
if numcol > 1:
self.bmpbuf = self.bmpbuf + '\x00\x01\x00\x00\x00\x00\x00\x00'
for i in range(numcol):
self.bmpbuf = self.bmpbuf + chunk.data[122 + i * 3:125 +
i * 3] + '\x00'
self.bmpbuf += chunk.data[bmpstart + 40:]
self.extracted_image = Image.open(StringIO.StringIO(self.bmpbuf))
self.extracted_image.load()
def extract_bmp(self, numbmp,width,height):
if not self.bmp_dict.has_key(numbmp):
return
chunk=self.bmp_dict[numbmp]
palflag = ord(chunk.data[0x36])
[bmpsize] = struct.unpack('<L',chunk.data[42:46])
[bmpstart] = struct.unpack('<L',chunk.data[50:54])
numcol = (bmpstart - 82)/3
if palflag == 5:
numcol = 256
bmpstart2 = numcol*4 + 54
bmpstart2 = struct.pack('<L',bmpstart2)
if palflag == 3:#CMYK image
self.bmpbuf=chunk.data[bmpstart+40:]
self.extracted_image = Image.fromstring('CMYK', (width, height), self.bmpbuf, 'raw', 'CMYK', 0, -1)
elif palflag == 5:#Grayscale image
self.bmpbuf=chunk.data[bmpstart+40:]
bytes=math.ceil(width/2.0)*2
self.extracted_image = Image.fromstring('L', (width, height), self.bmpbuf, 'raw', 'L', bytes, -1)
elif palflag == 6: #Mono image
bmpstart2 = numcol*4 + 66
bmpstart2 = struct.pack('<L',bmpstart2)
self.bmpbuf = 'BM'+chunk.data[42:50]+bmpstart2[0:4]+'\x28\x00\x00\x00'
self.bmpbuf += chunk.data[62:72]+chunk.data[74:78]
self.bmpbuf += '\x00\x00'+chunk.data[82:90]+'\x00\x00\x00\x00'
self.bmpbuf += '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
self.bmpbuf += chunk.data[bmpstart+40:]
self.extracted_image = Image.open(StringIO.StringIO(self.bmpbuf ))
self.extracted_image.load()
# elif palflag == 1: #RGB
# print 'width, height', (width, height)
# self.bmpbuf=chunk.data[bmpstart+40:]
# self.extracted_image = Image.fromstring('RGB', (width, height), self.bmpbuf, 'raw', 'BGR', 0, -1)
else:
self.bmpbuf = 'BM'+chunk.data[42:50]+bmpstart2[0:4]+'\x28\x00\x00\x00'
self.bmpbuf += chunk.data[62:72]+chunk.data[74:78]
self.bmpbuf += '\x00\x00'+chunk.data[82:90]+'\x00\x00\x00\x00'
if numcol > 1:
self.bmpbuf = self.bmpbuf+'\x00\x01\x00\x00\x00\x00\x00\x00'
for i in range (numcol):
self.bmpbuf = self.bmpbuf+chunk.data[122+i*3:125+i*3]+'\x00'
self.bmpbuf += chunk.data[bmpstart+40:]
self.extracted_image = Image.open(StringIO.StringIO(self.bmpbuf ))
self.extracted_image.load()
def raster_image(self, trafo, llx, lly, urx, ury, width, height, bits,
mode, alpha, reserved, encoding, mask):
if bits != 8 or mode not in (1, 3):
self.add_message(
_("Only images with 1 or 3 components "
"and 8 bits/component supported"))
self.skip_to_dsc("AI5_EndRaster")
return
decode = streamfilter.SubFileDecode(self.tokenizer.source,
'%AI5_EndRaster')
if encoding == 0:
decode = streamfilter.HexDecode(decode)
data_length = mode * width * height
data = decode.read(data_length)
#f = open("/tmp/dump.ppm", "w")
#if mode == 1:
# f.write("P5\n%d %d\n255\n" % (width, height))
#else:
# f.write("P6\n%d %d\n255\n" % (width, height))
#f.write(data)
#f.close()
if mode == 1:
mode = 'L'
elif mode == 3:
mode = 'RGB'
elif mode == 4:
mode == 'CMYK'
image = Image.fromstring(mode, (width, height), data, 'raw', mode)
self.image(image, apply(Trafo, tuple(trafo)))
def raster_image(self, trafo, llx, lly, urx, ury, width, height,
bits, mode, alpha, reserved, encoding, mask):
if bits != 8 or mode not in (1, 3):
self.add_message(_("Only images with 1 or 3 components "
"and 8 bits/component supported"))
self.skip_to_dsc("AI5_EndRaster")
return
decode = streamfilter.SubFileDecode(self.tokenizer.source,
'%AI5_EndRaster')
if encoding == 0:
decode = streamfilter.HexDecode(decode)
data_length = mode * width * height
data = decode.read(data_length)
#f = open("/tmp/dump.ppm", "w")
#if mode == 1:
# f.write("P5\n%d %d\n255\n" % (width, height))
#else:
# f.write("P6\n%d %d\n255\n" % (width, height))
#f.write(data)
#f.close()
if mode == 1:
mode = 'L'
elif mode == 3:
mode = 'RGB'
elif mode == 4:
mode == 'CMYK'
image = Image.fromstring(mode, (width, height), data, 'raw', mode)
self.image(image, apply(Trafo, tuple(trafo)))
def read_objects(self, objects):
n_objects = 0
# Traverse the list of drawfile object
for object in objects:
if isinstance(object, drawfile.group):
# Start a group object in the document
self.begin_group()
# Descend into the group
n_objects_lower = self.read_objects(object.objects)
# If the group was empty then don't try to end it
if n_objects_lower == 0:
# self.__pop()
(self.composite_class, self.composite_args,
self.composite_items,
self.composite_stack) = self.composite_stack
else:
# End group object
self.end_group()
n_objects = n_objects + 1
elif isinstance(object, drawfile.tagged):
# Tagged object
n_objects_lower = self.read_objects([object.object])
if n_objects_lower != 0:
n_objects = n_objects + 1
elif isinstance(object, drawfile.path):
# Path object
n_objects = n_objects + 1
# Set the path style
self.style.line_width = object.width / scale
if object.style['join'] == 'mitred':
self.style.line_join = const.JoinMiter
if object.style['start cap'] == 'butt':
self.style.line_cap = const.CapButt
elif object.style['start cap'] == 'round':
if object.width > 0:
width = 0.5
length = 0.5
else:
width = 0.0
length = 0.0
# Draw arrow
path = [(0.0, width),
(0.5 * length, width, length, 0.5 * width, length,
0.0),
(length, -0.5 * width, 0.5 * length, -width, 0.0,
-width), (0.0, width)]
self.style.line_arrow1 = Arrow(path, 1)
elif object.style['start cap'] == 'square':
if object.width > 0:
width = 0.5
length = 0.5
else:
width = 0.0
length = 0.0
# Draw arrow
path = [(0.0, width), (length, width), (length, -width),
(0.0, -width), (0.0, width)]
self.style.line_arrow1 = Arrow(path, 1)
elif object.style['start cap'] == 'triangular':
if object.width > 0:
width = object.style['triangle cap width'] / 16.0
length = object.style['triangle cap length'] / 16.0
else:
width = 0.0
length = 0.0
# Draw arrow
path = [(0.0, width), (length, 0.0), (0.0, -width),
(0.0, width)]
self.style.line_arrow1 = Arrow(path, 1)
if (object.width / scale) < 1.0:
self.style.line_arrow1.path.Transform(
Scale(object.width / scale, object.width / scale))
if object.style['end cap'] == 'butt':
self.style.line_cap = const.CapButt
elif object.style['end cap'] == 'round':
if object.width > 0:
width = 0.5
length = 0.5
else:
width = 0.0
length = 0.0
# Draw arrow
path = [(0.0, width),
(0.5 * length, width, length, 0.5 * width, length,
0.0),
(length, -0.5 * width, 0.5 * length, -width, 0.0,
-width), (0.0, width)]
self.style.line_arrow2 = Arrow(path, 1)
elif object.style['end cap'] == 'square':
if object.width > 0:
width = 0.5
length = 0.5
else:
width = 0.0
length = 0.0
# Draw arrow
path = [(0.0, width), (length, width), (length, -width),
(0.0, -width), (0.0, width)]
self.style.line_arrow2 = Arrow(path, 1)
elif object.style['end cap'] == 'triangular':
if object.width > 0:
width = object.style['triangle cap width'] / 16.0
length = object.style['triangle cap length'] / 16.0
else:
width = 0.0
length = 0.0
# Draw arrow
path = [(0.0, width), (length, 0.0), (0.0, -width),
(0.0, width)]
self.style.line_arrow2 = Arrow(path, 1)
if (object.width / scale) < 1.0:
self.style.line_arrow2.path.Transform(
Scale(object.width / scale, object.width / scale))
# Outline colour
if object.outline == [255, 255, 255, 255]:
self.style.line_pattern = EmptyPattern
else:
self.style.line_pattern = SolidPattern(
CreateRGBColor(
float(object.outline[1]) / 255.0,
float(object.outline[2]) / 255.0,
float(object.outline[3]) / 255.0))
# Fill colour
if object.fill == [255, 255, 255, 255]:
self.style.fill_pattern = EmptyPattern
else:
self.style.fill_pattern = SolidPattern(
CreateRGBColor(
float(object.fill[1]) / 255.0,
float(object.fill[2]) / 255.0,
float(object.fill[3]) / 255.0))
# Dash pattern
if object.style['dash pattern'] == 'present':
line_dashes = []
for n in object.pattern:
line_dashes.append(int(n / scale))
self.style.line_dashes = tuple(line_dashes)
# Create a list of path objects in the document
paths = []
path = None
# Examine the path elements
for element in object.path:
if element[0] == 'move':
x, y = self.relative(element[1][0], element[1][1])
# Add any previous path to the list
if path != None:
# path.load_close()
paths.append(path)
path = CreatePath()
path.AppendLine(x, y)
elif element[0] == 'draw':
x, y = self.relative(element[1][0], element[1][1])
path.AppendLine(x, y)
elif element[0] == 'bezier':
x1, y1 = self.relative(element[1][0], element[1][1])
x2, y2 = self.relative(element[2][0], element[2][1])
x, y = self.relative(element[3][0], element[3][1])
path.AppendBezier(x1, y1, x2, y2, x, y)
elif element[0] == 'close':
path.ClosePath()
elif element[0] == 'end':
# Should be the last object in the path
# path.load_close()
paths.append(path)
break
# Create a bezier object
if paths != []:
self.bezier(tuple(paths))
elif isinstance(object, drawfile.font_table):
# Font table
n_objects = n_objects + 1
# Set object level instance
self.font_table = object.font_table
elif isinstance(object, drawfile.text):
# Text object
n_objects = n_objects + 1
# Determine the font
if self.font_table.has_key(object.style):
self.style.font = RISCOSFont(self.font_table[object.style])
else:
self.style.font = GetFont('Times Roman')
# The size
self.style.font_size = object.size[0] / scale
# Outline colour
if object.background == [255, 255, 255, 255]:
self.style.line_pattern = EmptyPattern
else:
self.style.line_pattern = SolidPattern(
CreateRGBColor(
float(object.background[1]) / 255.0,
float(object.background[2]) / 255.0,
float(object.background[3]) / 255.0))
# Fill colour
if object.foreground == [255, 255, 255, 255]:
self.style.fill_pattern = EmptyPattern
else:
self.style.fill_pattern = SolidPattern(
CreateRGBColor(
float(object.foreground[1]) / 255.0,
float(object.foreground[2]) / 255.0,
float(object.foreground[3]) / 255.0))
# Transformation
if hasattr(object, 'transform'):
x, y = object.transform[4] / scale, object.transform[
5] / scale
ox, oy = self.relative(object.baseline[0],
object.baseline[1])
transform = Trafo(object.transform[0] / 65536.0,
object.transform[1] / 65536.0,
object.transform[2] / 65536.0,
object.transform[3] / 65536.0, ox + x,
oy + y)
else:
transform = Translation(
self.relative(object.baseline[0], object.baseline[1]))
# Write the text
self.simple_text(object.text, transform)
elif isinstance(object, drawfile.jpeg):
# JPEG object
n_objects = n_objects + 1
# Transformation matrix
x, y = self.relative(object.transform[4], object.transform[5])
# Scale the object using the dpi information available, noting
# that unlike Draw which uses 90 dpi, Sketch uses 72 dpi.
# (I assume this since 90 dpi Drawfile JPEG objects appear 1.25
# times larger in Sketch if no scaling is performed here.)
scale_x = (object.transform[0] / 65536.0) * (72.0 /
object.dpi_x)
scale_y = (object.transform[3] / 65536.0) * (72.0 /
object.dpi_y)
transform = Trafo(scale_x, object.transform[1] / 65536.0,
object.transform[2] / 65536.0, scale_y, x, y)
# Decode the JPEG image
image = Image.open(StringIO.StringIO(object.image))
# # Read dimensions of images in pixels
# width, height = image.size
#
# # Divide these by the dpi values to obtain the size of the
# # image in inches
# width, height = width/float(object.dpi_x), \
# height/float(object.dpi_y)
# image.load()
self.image(image, transform)
elif isinstance(object, drawfile.sprite):
# Sprite object
n_objects = n_objects + 1
# Transformation matrix
if hasattr(object, 'transform'):
x, y = self.relative(object.transform[4],
object.transform[5])
# Multiply the scale factor by that in the transformation matrix
scale_x = (object.transform[0] /
65536.0) * (72.0 / object.sprite['dpi x'])
scale_y = (object.transform[3] /
65536.0) * (72.0 / object.sprite['dpi y'])
transform = Trafo( scale_x,
(object.transform[1]/65536.0) * \
(72.0 / object.sprite['dpi y']),
(object.transform[2]/65536.0) * \
(72.0 / object.sprite['dpi x']),
scale_y,
x, y )
else:
x, y = self.relative(object.x1, object.y1)
# Draw scales the Sprite to fit in the object's
# bounding box. To do the same, we need to know the
# actual size of the Sprite
# In points:
# size_x = 72.0 * float(object.sprite['width']) / \
# object.sprite['dpi x']
# size_y = 72.0 * float(object.sprite['height']) / \
# object.sprite['dpi y']
#
# # Bounding box dimensions in points:
# bbox_width = (object.x2 - object.x1)/scale
# bbox_height = (object.y2 - object.y1)/scale
#
# # Scale factors
# scale_x = (bbox_width / size_x) * \
# (72.0 / object.sprite['dpi x'])
# scale_y = (bbox_height / size_y) * \
# (72.0 / object.sprite['dpi y'])
scale_x = (object.x2 -
object.x1) / (scale * object.sprite['width'])
scale_y = (object.y2 -
object.y1) / (scale * object.sprite['height'])
transform = Trafo(scale_x, 0.0, 0.0, scale_y, x, y)
# Create an Image object
image = Image.fromstring(
object.sprite['mode'],
(object.sprite['width'], object.sprite['height']),
object.sprite['image'])
self.image(image, transform)
elif isinstance(object, drawfile.options):
# Options object
n_objects = n_objects + 1
# Read page size
paper_size = object.options['paper size']
orientation = object.options['paper limits']
if paper_size in papersizes:
if orientation == 'landscape':
self.page_layout = pagelayout.PageLayout(
object.options['paper size'],
orientation=pagelayout.Landscape)
else:
self.page_layout = pagelayout.PageLayout(
object.options['paper size'],
orientation=pagelayout.Portrait)
if object.options['grid locking'] == 'on':
spacing = object.options['grid spacing']
if object.options['grid units'] == 'in':
spacing = spacing * 72.0
else:
spacing = spacing * 72.0 / 2.54
if object.options['grid shown'] == 'on':
visible = 1
else:
visible = 0
# self.begin_layer_class( GridLayer,
# (
# (0, 0, int(spacing), int(spacing)),
# visible,
# CreateRGBColor(0.0, 0.0, 0.0),
# _("Grid")
# ) )
# self.end_composite()
elif isinstance(object, drawfile.text_area):
# Text area
n_objects = n_objects + 1
# The text area object contains a number of columns.
self.columns = len(object.columns)
# Start in the first column and move to subsequent
# columns as required, unless the number is overidden
# by details in the text area.
self.column = 0
# The cursor position is initially undefined.
cursor = [None, None]
# The column margins
self.margin_offsets = [1.0, 1.0]
self.margins = [ (object.columns[self.column].x1 / scale) + \
self.margin_offsets[0],
(object.columns[self.column].x2 / scale) - \
self.margin_offsets[1] ]
# The column base
self.column_base = object.columns[self.column].y1 / scale
# Line and paragraph spacing
self.linespacing = 0.0
paragraph = 10.0
# Current font name and dimensions
font_name = ''
font_size = 0.0
font_width = 0.0
# Text colours
background = (255, 255, 255)
foreground = (0, 0, 0)
# Build lines (lists of words) until the column width
# is reached then write the line to the page.
line = []
width = 0.0
# Current text alignment
align = 'L'
# Last command to be executed
last_command = ''
# Execute the commands in the text area:
for command, args in object.commands:
if command == '!':
# Version number
# print 'Version number', args
pass
elif command == 'A':
# print 'Align:', args
# Write current line
self.ta_write_line(align, cursor, line, 0)
# Empty the line list
line = []
# Set the line width
width = 0.0
# Align text
align = args
# Start new line
cursor = self.ta_new_line(cursor, object,
self.linespacing)
elif command == 'B':
# print 'Background:', args
# Background colour
background = args
elif command == 'C':
# print 'Foreground:', args
# Foreground colour
foreground = args
elif command == 'D':
# print 'Columns:', args
# Number of columns
if self.column == 0 and cursor == [None, None]:
# Nothing rendered yet, so change number of columns
self.columns = args
elif command == 'F':
# print 'Define font:', args
# Define font (already defined in object.font_table)
pass
elif command == 'L':
# print 'Line spacing:', args
# Set line spacing
self.linespacing = args
elif command == 'M':
# print 'Margins:', args
# Change margins
self.margin_offsets = [args[0], args[1]]
self.margins = [
(object.columns[self.column].x1 / scale) + args[0],
(object.columns[self.column].x2 / scale) - args[1]
]
elif command == 'P':
# print 'Paragraph spacing:', args
# Change paragraph spacing
paragraph = args
elif command == 'U':
# print 'Underlining'
# Underlining
pass
elif command == 'V':
# print 'Vertical displacement'
# Vertical displacement
pass
elif command == '-':
# print 'Hyphen'
# Hyphen
pass
elif command == 'newl':
# print 'New line'
# New line
# Write current line
self.ta_write_line(align, cursor, line, 0)
# Start new line
cursor = self.ta_new_line(cursor, object,
self.linespacing)
# Can't position cursor?
if cursor == [None, None]:
break
# Empty the line list
line = []
# Set the line width
width = 0.0
elif command == 'para':
# print 'New paragraph'
# New paragraph
# Write current line
self.ta_write_line(align, cursor, line, 0)
# Start new line
if last_command != 'newl':
cursor = self.ta_new_line(
cursor, object, paragraph + self.linespacing)
else:
cursor = self.ta_new_line(cursor, object,
paragraph)
# Can't position cursor?
if cursor == [None, None]:
break
# Empty the line list
line = []
# Set the line width
width = 0.0
elif command == ';':
# print 'Comment:', args
# Comment
pass
elif command == 'font':
# print 'Use font:', args
# Font change
font_name, font_size, font_width = object.font_table[
args]
# Select font
use_font = RISCOSFont(font_name)
# Move cursor to start of a line if the cursor is
# undefined
if cursor == [None, None]:
cursor[0] = self.margins[0]
cursor[1] = (object.columns[self.column].y2 /
scale) - font_size
# Set line spacing
self.linespacing = font_size
elif command == 'text':
# print args
# Text. Add it to the line, checking that the line
# remains within the margins.
text, space = self.make_safe(args[0]), args[1]
# Add the width of the text to the current total width
textobj = SimpleText()
width = width + use_font.TextCoordBox(
text, font_size, textobj.properties)[2]
# print width, margins[1] - margins[0]
# Compare current total width with column width
while width > (self.margins[1] - self.margins[0]):
# First write any text on this line
if line != []:
# Width will exceed column width
# print 'Width will exceed column width'
# Write current line
self.ta_write_line(align, cursor, line, 1)
# Start new line
cursor = self.ta_new_line(
cursor, object, self.linespacing)
# Can't position cursor?
if cursor == [None, None]:
break
# Clear the list
line = []
# Reset the width
width = 0.0
# Now attempt to fit this word on the next line
width = use_font.TextCoordBox(
text, font_size, textobj.properties)[2]
br = len(text)
# Continue to try until the word fits, or none of it fits
while width > (self.margins[1] -
self.margins[0]) and br > 0:
# Keep checking the size of the word
width = use_font.TextCoordBox(
text[:br], font_size,
textobj.properties)[2]
br = br - 1
if br == 0:
# Word couldn't fit in the column at all, so
# break out of this loop
break
elif br < len(text):
# Write the subword to the line
self.ta_write_line(
align, cursor,
[(text[:br], font_name,
font_size, font_width,
self.ta_set_colour(foreground),
self.ta_set_colour(background))], 0)
# Start new line
cursor = self.ta_new_line(
cursor, object, self.linespacing)
# Can't position cursor?
if cursor == [None, None]:
break
# keep the remaining text
text = text[br:]
# The width is just the width of this text
width = use_font.TextCoordBox(
text, font_size, textobj.properties)[2]
# If the whole string fit onto the line then
# control will flow to the else clause which will
# append the text to the line list for next time.
else:
# The text fits within the margins so add the text
# to the line
line.append(
(text, font_name, font_size, font_width,
self.ta_set_colour(foreground),
self.ta_set_colour(background)))
# Also append any trailing space
if space != '':
line.append(
(space, font_name, font_size, font_width,
self.ta_set_colour(foreground),
self.ta_set_colour(background)))
width = width + use_font.TextCoordBox(
space, font_size, textobj.properties)[2]
# Can't position cursor?
if cursor == [None, None]:
break
# Remember this command
last_command = command
# Render any remaining text
if line != [] and cursor != [None, None]:
# Write current line
self.ta_write_line(align, cursor, line, 0)
else:
pass
# Return the number of recognised objects
return n_objects
def read_objects(self, objects):
n_objects = 0
# Traverse the list of drawfile object
for object in objects:
if isinstance(object, drawfile.group):
# Start a group object in the document
self.begin_group()
# Descend into the group
n_objects_lower = self.read_objects(object.objects)
# If the group was empty then don't try to end it
if n_objects_lower == 0:
# self.__pop()
(self.composite_class,
self.composite_args,
self.composite_items,
self.composite_stack) = self.composite_stack
else:
# End group object
self.end_group()
n_objects = n_objects + 1
elif isinstance(object, drawfile.tagged):
# Tagged object
n_objects_lower = self.read_objects([object.object])
if n_objects_lower != 0:
n_objects = n_objects + 1
elif isinstance(object, drawfile.path):
# Path object
n_objects = n_objects + 1
# Set the path style
self.style.line_width = object.width / scale
if object.style['join'] == 'mitred':
self.style.line_join = const.JoinMiter
if object.style['start cap'] == 'butt':
self.style.line_cap = const.CapButt
elif object.style['start cap'] == 'round':
if object.width > 0:
width = 0.5
length = 0.5
else:
width = 0.0
length = 0.0
# Draw arrow
path = [(0.0, width),
(0.5*length, width, length, 0.5*width, length, 0.0),
(length, -0.5*width,
0.5*length, -width,
0.0, -width), (0.0, width)]
self.style.line_arrow1 = Arrow(path, 1)
elif object.style['start cap'] == 'square':
if object.width > 0:
width = 0.5
length = 0.5
else:
width = 0.0
length = 0.0
# Draw arrow
path = [(0.0, width), (length, width),
(length, -width), (0.0, -width),
(0.0, width)]
self.style.line_arrow1 = Arrow(path, 1)
elif object.style['start cap'] == 'triangular':
if object.width > 0:
width = object.style['triangle cap width'] / 16.0
length = object.style['triangle cap length'] / 16.0
else:
width = 0.0
length = 0.0
# Draw arrow
path = [(0.0, width), (length, 0.0),
(0.0, -width), (0.0, width)]
self.style.line_arrow1 = Arrow(path, 1)
if (object.width / scale) < 1.0:
self.style.line_arrow1.path.Transform(Scale(object.width / scale, object.width / scale) )
if object.style['end cap'] == 'butt':
self.style.line_cap = const.CapButt
elif object.style['end cap'] == 'round':
if object.width > 0:
width = 0.5
length = 0.5
else:
width = 0.0
length = 0.0
# Draw arrow
path = [(0.0, width),
(0.5*length, width, length, 0.5*width, length, 0.0),
(length, -0.5*width,
0.5*length, -width,
0.0, -width), (0.0, width)]
self.style.line_arrow2 = Arrow(path, 1)
elif object.style['end cap'] == 'square':
if object.width > 0:
width = 0.5
length = 0.5
else:
width = 0.0
length = 0.0
# Draw arrow
path = [(0.0, width), (length, width),
(length, -width), (0.0, -width),
(0.0, width)]
self.style.line_arrow2 = Arrow(path, 1)
elif object.style['end cap'] == 'triangular':
if object.width > 0:
width = object.style['triangle cap width'] / 16.0
length = object.style['triangle cap length'] / 16.0
else:
width = 0.0
length = 0.0
# Draw arrow
path = [(0.0, width),
(length, 0.0),
(0.0, -width),
(0.0, width)]
self.style.line_arrow2 = Arrow(path, 1)
if (object.width / scale) < 1.0:
self.style.line_arrow2.path.Transform(Scale(object.width / scale, object.width / scale) )
# Outline colour
if object.outline == [255, 255, 255, 255]:
self.style.line_pattern = EmptyPattern
else:
self.style.line_pattern = SolidPattern(
CreateRGBColor( float(object.outline[1]) / 255.0,
float(object.outline[2]) / 255.0,
float(object.outline[3]) / 255.0 ) )
# Fill colour
if object.fill == [255, 255, 255, 255]:
self.style.fill_pattern = EmptyPattern
else:
self.style.fill_pattern = SolidPattern(
CreateRGBColor( float(object.fill[1]) / 255.0,
float(object.fill[2]) / 255.0,
float(object.fill[3]) / 255.0 )
)
# Dash pattern
if object.style['dash pattern'] == 'present':
line_dashes = []
for n in object.pattern:
line_dashes.append(int(n/scale))
self.style.line_dashes = tuple(line_dashes)
# Create a list of path objects in the document
paths = []
path = None
# Examine the path elements
for element in object.path:
if element[0] == 'move':
x, y = self.relative(element[1][0], element[1][1])
# Add any previous path to the list
if path != None:
# path.load_close()
paths.append(path)
path = CreatePath()
path.AppendLine(x, y)
elif element[0] == 'draw':
x, y = self.relative(element[1][0], element[1][1])
path.AppendLine(x, y)
elif element[0] == 'bezier':
x1, y1 = self.relative(element[1][0], element[1][1])
x2, y2 = self.relative(element[2][0], element[2][1])
x, y = self.relative(element[3][0], element[3][1])
path.AppendBezier(x1, y1, x2, y2, x, y)
elif element[0] == 'close':
path.ClosePath()
elif element[0] == 'end':
# Should be the last object in the path
# path.load_close()
paths.append(path)
break
# Create a bezier object
if paths != []:
self.bezier(tuple(paths))
elif isinstance(object, drawfile.font_table):
# Font table
n_objects = n_objects + 1
# Set object level instance
self.font_table = object.font_table
elif isinstance(object, drawfile.text):
# Text object
n_objects = n_objects + 1
# Determine the font
if self.font_table.has_key(object.style):
self.style.font = RISCOSFont(self.font_table[object.style])
else:
self.style.font = GetFont('Times Roman')
# The size
self.style.font_size = object.size[0]/scale
# Outline colour
if object.background == [255, 255, 255, 255]:
self.style.line_pattern = EmptyPattern
else:
self.style.line_pattern = SolidPattern(
CreateRGBColor( float(object.background[1]) / 255.0,
float(object.background[2]) / 255.0,
float(object.background[3]) / 255.0 )
)
# Fill colour
if object.foreground == [255, 255, 255, 255]:
self.style.fill_pattern = EmptyPattern
else:
self.style.fill_pattern = SolidPattern(
CreateRGBColor( float(object.foreground[1]) / 255.0,
float(object.foreground[2]) / 255.0,
float(object.foreground[3]) / 255.0 )
)
# Transformation
if hasattr(object, 'transform'):
x, y = object.transform[4]/scale, object.transform[5]/scale
ox, oy = self.relative(object.baseline[0],
object.baseline[1])
transform = Trafo(object.transform[0]/65536.0,
object.transform[1]/65536.0,
object.transform[2]/65536.0,
object.transform[3]/65536.0,
ox + x, oy + y )
else:
transform = Translation(self.relative(object.baseline[0], object.baseline[1]) )
# Write the text
self.simple_text(object.text, transform)
elif isinstance(object, drawfile.jpeg):
# JPEG object
n_objects = n_objects + 1
# Transformation matrix
x, y = self.relative(object.transform[4], object.transform[5])
# Scale the object using the dpi information available, noting
# that unlike Draw which uses 90 dpi, Sketch uses 72 dpi.
# (I assume this since 90 dpi Drawfile JPEG objects appear 1.25
# times larger in Sketch if no scaling is performed here.)
scale_x = (object.transform[0]/65536.0) * (72.0 / object.dpi_x)
scale_y = (object.transform[3]/65536.0) * (72.0 / object.dpi_y)
transform = Trafo( scale_x, object.transform[1]/65536.0,
object.transform[2]/65536.0, scale_y,
x, y )
# Decode the JPEG image
image = Image.open(StringIO.StringIO(object.image))
# # Read dimensions of images in pixels
# width, height = image.size
#
# # Divide these by the dpi values to obtain the size of the
# # image in inches
# width, height = width/float(object.dpi_x), \
# height/float(object.dpi_y)
# image.load()
self.image(image, transform)
elif isinstance(object, drawfile.sprite):
# Sprite object
n_objects = n_objects + 1
# Transformation matrix
if hasattr(object, 'transform'):
x, y = self.relative(object.transform[4],
object.transform[5])
# Multiply the scale factor by that in the transformation matrix
scale_x = (object.transform[0]/65536.0) * (72.0 / object.sprite['dpi x'])
scale_y = (object.transform[3]/65536.0) * (72.0 / object.sprite['dpi y'])
transform = Trafo( scale_x,
(object.transform[1]/65536.0) * \
(72.0 / object.sprite['dpi y']),
(object.transform[2]/65536.0) * \
(72.0 / object.sprite['dpi x']),
scale_y,
x, y )
else:
x, y = self.relative(object.x1, object.y1)
# Draw scales the Sprite to fit in the object's
# bounding box. To do the same, we need to know the
# actual size of the Sprite
# In points:
# size_x = 72.0 * float(object.sprite['width']) / \
# object.sprite['dpi x']
# size_y = 72.0 * float(object.sprite['height']) / \
# object.sprite['dpi y']
#
# # Bounding box dimensions in points:
# bbox_width = (object.x2 - object.x1)/scale
# bbox_height = (object.y2 - object.y1)/scale
#
# # Scale factors
# scale_x = (bbox_width / size_x) * \
# (72.0 / object.sprite['dpi x'])
# scale_y = (bbox_height / size_y) * \
# (72.0 / object.sprite['dpi y'])
scale_x = (object.x2 - object.x1) / (scale * object.sprite['width'])
scale_y = (object.y2 - object.y1) / (scale * object.sprite['height'])
transform = Trafo( scale_x, 0.0, 0.0, scale_y, x, y )
# Create an Image object
image = Image.fromstring(object.sprite['mode'],
(object.sprite['width'],
object.sprite['height']),
object.sprite['image'])
self.image(image, transform)
elif isinstance(object, drawfile.options):
# Options object
n_objects = n_objects + 1
# Read page size
paper_size = object.options['paper size']
orientation = object.options['paper limits']
if paper_size in papersizes:
if orientation == 'landscape':
self.page_layout = pagelayout.PageLayout(
object.options['paper size'],
orientation = pagelayout.Landscape)
else:
self.page_layout = pagelayout.PageLayout(
object.options['paper size'],
orientation = pagelayout.Portrait)
if object.options['grid locking'] == 'on':
spacing = object.options['grid spacing']
if object.options['grid units'] == 'in':
spacing = spacing * 72.0
else:
spacing = spacing * 72.0 / 2.54
if object.options['grid shown'] == 'on':
visible = 1
else:
visible = 0
# self.begin_layer_class( GridLayer,
# (
# (0, 0, int(spacing), int(spacing)),
# visible,
# CreateRGBColor(0.0, 0.0, 0.0),
# _("Grid")
# ) )
# self.end_composite()
elif isinstance(object, drawfile.text_area):
# Text area
n_objects = n_objects + 1
# The text area object contains a number of columns.
self.columns = len(object.columns)
# Start in the first column and move to subsequent
# columns as required, unless the number is overidden
# by details in the text area.
self.column = 0
# The cursor position is initially undefined.
cursor = [None, None]
# The column margins
self.margin_offsets = [1.0, 1.0]
self.margins = [ (object.columns[self.column].x1 / scale) + \
self.margin_offsets[0],
(object.columns[self.column].x2 / scale) - \
self.margin_offsets[1] ]
# The column base
self.column_base = object.columns[self.column].y1 / scale
# Line and paragraph spacing
self.linespacing = 0.0
paragraph = 10.0
# Current font name and dimensions
font_name = ''
font_size = 0.0
font_width = 0.0
# Text colours
background = (255, 255, 255)
foreground = ( 0, 0, 0)
# Build lines (lists of words) until the column width
# is reached then write the line to the page.
line = []
width = 0.0
# Current text alignment
align = 'L'
# Last command to be executed
last_command = ''
# Execute the commands in the text area:
for command, args in object.commands:
if command == '!':
# Version number
# print 'Version number', args
pass
elif command == 'A':
# print 'Align:', args
# Write current line
self.ta_write_line(align, cursor, line, 0)
# Empty the line list
line = []
# Set the line width
width = 0.0
# Align text
align = args
# Start new line
cursor = self.ta_new_line(cursor, object, self.linespacing )
elif command == 'B':
# print 'Background:', args
# Background colour
background = args
elif command == 'C':
# print 'Foreground:', args
# Foreground colour
foreground = args
elif command == 'D':
# print 'Columns:', args
# Number of columns
if self.column == 0 and cursor == [None, None]:
# Nothing rendered yet, so change number of columns
self.columns = args
elif command == 'F':
# print 'Define font:', args
# Define font (already defined in object.font_table)
pass
elif command == 'L':
# print 'Line spacing:', args
# Set line spacing
self.linespacing = args
elif command == 'M':
# print 'Margins:', args
# Change margins
self.margin_offsets = [args[0], args[1]]
self.margins = [
(object.columns[self.column].x1 / scale) + args[0],
(object.columns[self.column].x2 / scale) - args[1] ]
elif command == 'P':
# print 'Paragraph spacing:', args
# Change paragraph spacing
paragraph = args
elif command == 'U':
# print 'Underlining'
# Underlining
pass
elif command == 'V':
# print 'Vertical displacement'
# Vertical displacement
pass
elif command == '-':
# print 'Hyphen'
# Hyphen
pass
elif command == 'newl':
# print 'New line'
# New line
# Write current line
self.ta_write_line(align, cursor, line, 0)
# Start new line
cursor = self.ta_new_line(cursor, object, self.linespacing)
# Can't position cursor?
if cursor == [None, None]:
break
# Empty the line list
line = []
# Set the line width
width = 0.0
elif command == 'para':
# print 'New paragraph'
# New paragraph
# Write current line
self.ta_write_line(align, cursor, line, 0)
# Start new line
if last_command != 'newl':
cursor = self.ta_new_line(cursor, object, paragraph + self.linespacing)
else:
cursor = self.ta_new_line(cursor, object, paragraph)
# Can't position cursor?
if cursor == [None, None]:
break
# Empty the line list
line = []
# Set the line width
width = 0.0
elif command == ';':
# print 'Comment:', args
# Comment
pass
elif command == 'font':
# print 'Use font:', args
# Font change
font_name, font_size, font_width = object.font_table[args]
# Select font
use_font = RISCOSFont(font_name)
# Move cursor to start of a line if the cursor is
# undefined
if cursor == [None, None]:
cursor[0] = self.margins[0]
cursor[1] = (
object.columns[self.column].y2 / scale
) - font_size
# Set line spacing
self.linespacing = font_size
elif command == 'text':
# print args
# Text. Add it to the line, checking that the line
# remains within the margins.
text, space = self.make_safe(args[0]), args[1]
# Add the width of the text to the current total width
textobj=SimpleText()
width = width + use_font.TextCoordBox(text, font_size, textobj.properties)[2]
# print width, margins[1] - margins[0]
# Compare current total width with column width
while width > (self.margins[1] - self.margins[0]):
# First write any text on this line
if line != []:
# Width will exceed column width
# print 'Width will exceed column width'
# Write current line
self.ta_write_line(align, cursor, line, 1)
# Start new line
cursor = self.ta_new_line(cursor, object,
self.linespacing)
# Can't position cursor?
if cursor == [None, None]:
break
# Clear the list
line = []
# Reset the width
width = 0.0
# Now attempt to fit this word on the next line
width = use_font.TextCoordBox(text, font_size, textobj.properties)[2]
br = len(text)
# Continue to try until the word fits, or none of it fits
while width > (self.margins[1] - self.margins[0]) and br > 0:
# Keep checking the size of the word
width = use_font.TextCoordBox(text[:br], font_size, textobj.properties)[2]
br = br - 1
if br == 0:
# Word couldn't fit in the column at all, so
# break out of this loop
break
elif br < len(text):
# Write the subword to the line
self.ta_write_line( align, cursor,
[ ( text[:br], font_name,
font_size, font_width,
self.ta_set_colour(foreground),
self.ta_set_colour(background) )
], 0 )
# Start new line
cursor = self.ta_new_line(cursor, object,
self.linespacing)
# Can't position cursor?
if cursor == [None, None]:
break
# keep the remaining text
text = text[br:]
# The width is just the width of this text
width = use_font.TextCoordBox(text, font_size, textobj.properties)[2]
# If the whole string fit onto the line then
# control will flow to the else clause which will
# append the text to the line list for next time.
else:
# The text fits within the margins so add the text
# to the line
line.append( (text, font_name, font_size,
font_width,
self.ta_set_colour(
foreground),
self.ta_set_colour(background) ) )
# Also append any trailing space
if space != '':
line.append( (space, font_name, font_size,
font_width,
self.ta_set_colour(foreground),
self.ta_set_colour(background) ) )
width = width + use_font.TextCoordBox(space, font_size, textobj.properties)[2]
# Can't position cursor?
if cursor == [None, None]:
break
# Remember this command
last_command = command
# Render any remaining text
if line != [] and cursor != [None, None]:
# Write current line
self.ta_write_line(align, cursor, line, 0)
else:
pass
# Return the number of recognised objects
return n_objects