Esempi in Python per getTextIfEmpty

Esempio n. 1

File: vectorwrite.py Progetto: CNCBASHER/skeinforge

def writeOutput( fileName, gcodeText = '' ):
	"Write scalable vector graphics for a skeinforge gcode file, if activate vectorwrite is selected."
	repository = settings.getReadRepository( VectorwriteRepository() )
	if not repository.activateVectorwrite.value:
		return
	gcodeText = gcodec.getTextIfEmpty( fileName, gcodeText )
	analyzeFileGivenText( fileName, gcodeText, repository )

Esempio n. 2

File: vectorwrite.py Progetto: TeamTeamUSA/ReplicatorG

def writeOutput( fileName, gcodeText = '' ):
	"Write scalable vector graphics for a skeinforge gcode file, if activate vectorwrite is selected."
	vectorwritePreferences = preferences.getReadRepository( VectorwritePreferences() )
	if not vectorwritePreferences.activateVectorwrite.value:
		return
	gcodeText = gcodec.getTextIfEmpty( fileName, gcodeText )
	writeGivenPreferences( fileName, gcodeText, vectorwritePreferences )

Esempio n. 3

def writeOutput(fileName, gcodeText=''):
    "Write scalable vector graphics for a skeinforge gcode file, if activate vectorwrite is selected."
    repository = settings.getReadRepository(VectorwriteRepository())
    if not repository.activateVectorwrite.value:
        return
    gcodeText = gcodec.getTextIfEmpty(fileName, gcodeText)
    analyzeFileGivenText(fileName, gcodeText, repository)

Esempio n. 4

File: skeinview.py Progetto: TeamTeamUSA/SkeinFox

def writeOutput( fileName, gcodeText = '' ):
	"Display a skeinviewed gcode file for a skeinforge gcode file, if 'Activate Skeinview' is selected."
	skeinviewPreferences = SkeinviewPreferences()
	preferences.getReadPreferences( skeinviewPreferences )
	if skeinviewPreferences.activateSkeinview.value:
		gcodeText = gcodec.getTextIfEmpty( fileName, gcodeText )
		displayFileGivenText( fileName, gcodeText, skeinviewPreferences )

Esempio n. 5

File: behold.py Progetto: TeamTeamUSA/SkeinFox

def writeOutput( fileName, gcodeText = '' ):
	"Write a beholded gcode file for a skeinforge gcode file, if 'Activate Behold' is selected."
	beholdPreferences = BeholdPreferences()
	preferences.getReadPreferences( beholdPreferences )
	if beholdPreferences.activateBehold.value:
		gcodeText = gcodec.getTextIfEmpty( fileName, gcodeText )
		displayBeholdFileGivenText( fileName, gcodeText, beholdPreferences )

Esempio n. 6

File: analyze.py Progetto: CNCBASHER/skeinforge

def writeOutput( fileName, gcodeText = '' ):
	"Analyze a gcode file."
	gcodeText = gcodec.getTextIfEmpty( fileName, gcodeText )
	pluginFileNames = getPluginFileNames()
	for pluginFileName in pluginFileNames:
		analyzePluginsDirectoryPath = getPluginsDirectoryPath()
		pluginModule = gcodec.getModuleWithDirectoryPath( analyzePluginsDirectoryPath, pluginFileName )
		if pluginModule != None:
			pluginModule.writeOutput( fileName, gcodeText )

Esempio n. 7

File: analyze.py Progetto: TeamTeamUSA/ReplicatorG

def writeOutput( fileName = '', gcodeText = '' ):
	"Analyze a gcode file.  If no fileName is specified, comment the first gcode file in this folder that is not modified."
	gcodeText = gcodec.getTextIfEmpty( fileName, gcodeText )
	pluginFilenames = getPluginFilenames()
	for pluginFilename in pluginFilenames:
		analyzePluginsDirectoryPath = getPluginsDirectoryPath()
		pluginModule = gcodec.getModuleWithDirectoryPath( analyzePluginsDirectoryPath, pluginFilename )
		if pluginModule != None:
			pluginModule.writeOutput( fileName, gcodeText )

Esempio n. 8

def writeOutput(fileName, gcodeText=''):
    "Analyze a gcode file."
    gcodeText = gcodec.getTextIfEmpty(fileName, gcodeText)
    pluginFileNames = getPluginFileNames()
    for pluginFileName in pluginFileNames:
        analyzePluginsDirectoryPath = getPluginsDirectoryPath()
        pluginModule = gcodec.getModuleWithDirectoryPath(
            analyzePluginsDirectoryPath, pluginFileName)
        if pluginModule != None:
            pluginModule.writeOutput(fileName, gcodeText)

Esempio n. 9

File: jitter.py Progetto: yazici/skeinforge

def getCraftedText( fileName, text, jitterRepository = None ):
	"Jitter a gcode linear move text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), jitterRepository )

Esempio n. 10

File: preface.py Progetto: TeamTeamUSA/SkeinFox

def getCraftedText( fileName, text = '', prefacePreferences = None ):
	"Preface and convert an svg file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), prefacePreferences )

Esempio n. 11

def getCraftedText( fileName, gcodeText = '', repository = None ):
	"Dimension a gcode file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, gcodeText ), repository )

Esempio n. 12

File: clip.py Progetto: TeamTeamUSA/ReplicatorG

def getCraftedText( fileName, text, clipRepository = None ):
	"Clip a gcode linear move file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), clipRepository )

Esempio n. 13

def writeOutput(fileName, gcodeText=''):
    "Display a skeinviewed gcode file for a skeinforge gcode file, if 'Activate Skeinview' is selected."
    repository = settings.getReadRepository(SkeinviewRepository())
    if repository.activateSkeinview.value:
        gcodeText = gcodec.getTextIfEmpty(fileName, gcodeText)
        analyzeFileGivenText(fileName, gcodeText, repository)

Esempio n. 14

File: cool.py Progetto: yazici/skeinforge

def getCraftedText( fileName, text, coolRepository = None ):
	"Cool a gcode linear move text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), coolRepository )

Esempio n. 15

File: outset.py Progetto: CNCBASHER/skeinforge

def getCraftedText( fileName, text = '', repository = None ):
	"Outset the preface file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), repository )

Esempio n. 16

File: comb.py Progetto: CNCBASHER/skeinforge

def getCraftedText( fileName, text, combRepository = None ):
	"Comb a gcode linear move text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), combRepository )

Esempio n. 17

def getCraftedText(fileName, text='', feedRepository=None):
    "Feed the file or text."
    return getCraftedTextFromText(gcodec.getTextIfEmpty(fileName, text),
                                  feedRepository)

Esempio n. 18

def getCraftedText(fileName, text='', prefaceRepository=None):
    "Preface and convert an svg file or text."
    return getCraftedTextFromText(gcodec.getTextIfEmpty(fileName, text),
                                  prefaceRepository)

Esempio n. 19

def getCraftedText(fileName, text='', multiplyRepository=None):
    "Multiply the fill file or text."
    return getCraftedTextFromText(gcodec.getTextIfEmpty(fileName, text),
                                  multiplyRepository)

Esempio n. 20

File: coil.py Progetto: CNCBASHER/skeinforge

def getCraftedText( fileName, gcodeText = '', repository = None ):
	"Coil the file or gcodeText."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, gcodeText ), repository )

Esempio n. 21

File: speed.py Progetto: TeamTeamUSA/ReplicatorG

def getCraftedText( fileName, text = '', speedRepository = None ):
	"Speed the file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), speedRepository )

Esempio n. 22

def getCraftedText(fileName, gcodeText='', repository=None):
    "Coil the file or gcodeText."
    return getCraftedTextFromText(gcodec.getTextIfEmpty(fileName, gcodeText),
                                  repository)

Esempio n. 23

File: flow.py Progetto: TeamTeamUSA/ReplicatorG

def getCraftedText( fileName, text = '', flowRepository = None ):
	"Flow the file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), flowRepository )

Esempio n. 24

File: lash.py Progetto: TeamTeamUSA/SkeinFox

def getCraftedText( fileName, text, lashPreferences = None ):
	"Get a lashed gcode linear move text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), lashPreferences )

Esempio n. 25

def getCraftedText( fileName, text, splodgeRepository = None ):
	"Splodge a gcode linear move file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), splodgeRepository )

Esempio n. 26

File: carve.py Progetto: yazici/skeinforge

def getCraftedText(fileName, text='', repository=None):
    "Get carved text."
    if gcodec.getHasSuffix(fileName, '.svg'):
        text = gcodec.getTextIfEmpty(fileName, text)
        return text
    return getCraftedTextFromFileName(fileName, repository=None)

Esempio n. 27

def getCraftedText( fileName, text, oozebaneRepository = None ):
	"Oozebane a gcode linear move file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), oozebaneRepository )

Esempio n. 28

File: unpause.py Progetto: TeamTeamUSA/ReplicatorG

def getCraftedText( fileName, text, unpauseRepository = None ):
	"Unpause a gcode linear move file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), unpauseRepository )

Esempio n. 29

def getCraftedText(fileName, text='', chamberRepository=None):
    "Chamber the file or text."
    return getCraftedTextFromText(gcodec.getTextIfEmpty(fileName, text),
                                  chamberRepository)

Esempio n. 30

File: stretch.py Progetto: TeamTeamUSA/SkeinFox

def getCraftedText( fileName, text, stretchPreferences = None ):
	"Stretch a gcode linear move text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), stretchPreferences )

Esempio n. 31

File: lift.py Progetto: TeamTeamUSA/SkeinFox

def getCraftedText( fileName, text = '', liftPreferences = None ):
	"Lift the preface file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), liftPreferences )

Esempio n. 32

File: behold.py Progetto: aliensr85/skeinforge

def writeOutput(fileName, gcodeText=''):
    "Write a beholded gcode file for a skeinforge gcode file, if 'Activate Behold' is selected."
    repository = settings.getReadRepository(BeholdRepository())
    if repository.activateBehold.value:
        gcodeText = gcodec.getTextIfEmpty(fileName, gcodeText)
        analyzeFileGivenText(fileName, gcodeText, repository)

Esempio n. 33

File: dimension.py Progetto: CNCBASHER/skeinforge

def getCraftedText( fileName, gcodeText = '', repository = None ):
	"Dimension a gcode file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, gcodeText ), repository )

Esempio n. 34

File: skeinview.py Progetto: CNCBASHER/skeinforge

def writeOutput( fileName, gcodeText = '' ):
	"Display a skeinviewed gcode file for a skeinforge gcode file, if 'Activate Skeinview' is selected."
	repository = settings.getReadRepository( SkeinviewRepository() )
	if repository.activateSkeinview.value:
		gcodeText = gcodec.getTextIfEmpty( fileName, gcodeText )
		analyzeFileGivenText( fileName, gcodeText, repository )

Esempio n. 35

File: carve.py Progetto: TeamTeamUSA/SkeinFox

def getCraftedText(fileName, text="", carvePreferences=None):
    "Get carved text."
    if gcodec.getHasSuffix(fileName, ".svg"):
        text = gcodec.getTextIfEmpty(fileName, text)
        return text
    return getCraftedTextFromFileName(fileName, carvePreferences=None)

Esempio n. 36

File: stretch.py Progetto: yazici/skeinforge

def getCraftedText(fileName, text, stretchRepository=None):
    "Stretch a gcode linear move text."
    return getCraftedTextFromText(gcodec.getTextIfEmpty(fileName, text),
                                  stretchRepository)

Esempio n. 37

File: home.py Progetto: TeamTeamUSA/SkeinFox

def getCraftedText( fileName, text, homePreferences = None ):
	"Home a gcode linear move file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), homePreferences )

Esempio n. 38

File: cool.py Progetto: TeamTeamUSA/SkeinFox

def getCraftedText( fileName, text, coolPreferences = None ):
	"Cool a gcode linear move text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), coolPreferences )

Esempio n. 39

File: jitter.py Progetto: TeamTeamUSA/ReplicatorG

def getCraftedText( fileName, text, jitterRepository = None ):
	"Jitter a gcode linear move text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), jitterRepository )

Esempio n. 40

File: tower.py Progetto: yazici/skeinforge

def getCraftedText(fileName, text, towerRepository=None):
    "Tower a gcode linear move file or text."
    return getCraftedTextFromText(gcodec.getTextIfEmpty(fileName, text),
                                  towerRepository)

Esempio n. 41

def getCraftedText(fileName, text='', repository=None):
    "Widen the preface file or text."
    return getCraftedTextFromText(gcodec.getTextIfEmpty(fileName, text),
                                  repository)

Esempio n. 42

File: chamber.py Progetto: TeamTeamUSA/ReplicatorG

def getCraftedText( fileName, text = '', chamberRepository = None ):
	"Chamber the file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), chamberRepository )

Esempio n. 43

File: lash.py Progetto: yazici/skeinforge

def getCraftedText( fileName, text, lashRepository = None ):
	"Get a lashed gcode linear move text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), lashRepository )

Esempio n. 44

def getCraftedText( fileName, text = '', repository = None ):
	"Temperature the file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), repository )

Esempio n. 45

File: fillet.py Progetto: yazici/skeinforge

def getCraftedText(fileName, text, filletRepository=None):
    "Fillet a gcode linear move file or text."
    return getCraftedTextFromText(gcodec.getTextIfEmpty(fileName, text),
                                  filletRepository)

Esempio n. 46

File: jitter.py Progetto: TeamTeamUSA/SkeinFox

def getCraftedText( fileName, text, jitterPreferences = None ):
	"Jitter a gcode linear move text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), jitterPreferences )

Esempio n. 47

File: stretch.py Progetto: FarMcKon/skeinforge

def getCraftedText( fileName, text, stretchRepository = None ):
	"Stretch a gcode linear move text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), stretchRepository )

Esempio n. 48

File: flow.py Progetto: TeamTeamUSA/SkeinFox

def getCraftedText( fileName, text = '', flowPreferences = None ):
	"Flow the file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), flowPreferences )

Esempio n. 49

def getCraftedText( fileName, text = '', repository = None ):
	"Raftless the file or text."
	return getCraftedTextFromText( gcodec.getTextIfEmpty( fileName, text ), repository )

Esempio n. 50

File: unpause.py Progetto: yazici/skeinforge

def getCraftedText(fileName, text, repository=None):
    "Unpause a gcode linear move file or text."
    return getCraftedTextFromText(gcodec.getTextIfEmpty(fileName, text),
                                  repository)