def __init__(self):
"Set the default preferences, execute title & preferences fileName."
#Set the default preferences.
self.archive = []
#Create the archive, title of the execute button, title of the dialog & preferences fileName.
self.extrusionPerimeterWidthOverThickness = preferences.FloatPreference(
).getFromValue('Extrusion Perimeter Width over Thickness (ratio):',
1.8)
self.archive.append(self.extrusionPerimeterWidthOverThickness)
self.fileNameInput = preferences.Filename().getFromFilename(
interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File to be Insetted', '')
self.archive.append(self.fileNameInput)
self.infillPerimeterOverlap = preferences.FloatPreference(
).getFromValue('Infill Perimeter Overlap (ratio):', 0.05)
self.archive.append(self.infillPerimeterOverlap)
self.infillPerimeterOverlapMethodOfCalculationLabel = preferences.LabelDisplay(
).getFromName('Infill Perimeter Overlap Method of Calculation: ')
self.archive.append(
self.infillPerimeterOverlapMethodOfCalculationLabel)
infillRadio = []
self.perimeterInfillPreference = preferences.Radio().getFromRadio(
'Calculate Overlap from Perimeter and Infill', infillRadio, True)
self.archive.append(self.perimeterInfillPreference)
self.perimeterPreference = preferences.Radio().getFromRadio(
'Calculate Overlap from Perimeter Only', infillRadio, False)
self.archive.append(self.perimeterPreference)
self.startAtHome = preferences.BooleanPreference().getFromValue(
'Start at Home', False)
self.archive.append(self.startAtHome)
#Create the archive, title of the execute button, title of the dialog & preferences fileName.
self.executeTitle = 'Inset'
self.saveTitle = 'Save Preferences'
preferences.setHelpPreferencesFileNameTitleWindowPosition(
self, 'skeinforge_tools.inset.html')
def __init__( self ): "Set the default preferences, execute title & preferences fileName." #Set the default preferences. self.archive = [] self.activateFillet = preferences.BooleanPreference().getFromValue( 'Activate Fillet', True ) self.archive.append( self.activateFillet ) self.filletProcedureChoiceLabel = preferences.LabelDisplay().getFromName( 'Fillet Procedure Choice: ' ) self.archive.append( self.filletProcedureChoiceLabel ) filletRadio = [] self.arcPoint = preferences.Radio().getFromRadio( 'Arc Point', filletRadio, False ) self.archive.append( self.arcPoint ) self.arcRadius = preferences.Radio().getFromRadio( 'Arc Radius', filletRadio, False ) self.archive.append( self.arcRadius ) self.arcSegment = preferences.Radio().getFromRadio( 'Arc Segment', filletRadio, False ) self.archive.append( self.arcSegment ) self.bevel = preferences.Radio().getFromRadio( 'Bevel', filletRadio, True ) self.archive.append( self.bevel ) self.cornerFeedrateOverOperatingFeedrate = preferences.FloatPreference().getFromValue( 'Corner Feedrate over Operating Feedrate (ratio):', 1.0 ) self.archive.append( self.cornerFeedrateOverOperatingFeedrate ) self.filletRadiusOverExtrusionWidth = preferences.FloatPreference().getFromValue( 'Fillet Radius over Extrusion Width (ratio):', 0.35 ) self.archive.append( self.filletRadiusOverExtrusionWidth ) self.fileNameInput = preferences.Filename().getFromFilename( interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File to be Filleted', '' ) self.archive.append( self.fileNameInput ) self.reversalSlowdownDistanceOverExtrusionWidth = preferences.FloatPreference().getFromValue( 'Reversal Slowdown Distance over Extrusion Width (ratio):', 0.5 ) self.archive.append( self.reversalSlowdownDistanceOverExtrusionWidth ) self.useIntermediateFeedrateInCorners = preferences.BooleanPreference().getFromValue( 'Use Intermediate Feedrate in Corners', True ) self.archive.append( self.useIntermediateFeedrateInCorners ) #Create the archive, title of the execute button, title of the dialog & preferences fileName. self.executeTitle = 'Fillet' self.saveTitle = 'Save Preferences' preferences.setHelpPreferencesFileNameTitleWindowPosition( self, 'skeinforge_tools.fillet.html' )
def __init__(self):
"Set the default preferences, execute title & preferences fileName."
#Set the default preferences.
self.archive = []
self.activateSpeed = preferences.BooleanPreference().getFromValue(
'Activate Speed:', True)
self.archive.append(self.activateSpeed)
self.bridgeFeedrateMultiplier = preferences.FloatPreference(
).getFromValue('Bridge Feedrate Multiplier (ratio):', 1.0)
self.archive.append(self.bridgeFeedrateMultiplier)
self.extrusionDiameterOverThickness = preferences.FloatPreference(
).getFromValue('Extrusion Diameter over Thickness (ratio):', 1.25)
self.archive.append(self.extrusionDiameterOverThickness)
self.feedratePerSecond = preferences.FloatPreference().getFromValue(
'Feedrate (mm/s):', 16.0)
self.archive.append(self.feedratePerSecond)
self.fileNameInput = preferences.Filename().getFromFilename(
interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File to be Speeded', '')
self.archive.append(self.fileNameInput)
flowrateRadio = []
self.flowrateChoiceLabel = preferences.LabelDisplay().getFromName(
'Flowrate Choice: ')
self.archive.append(self.flowrateChoiceLabel)
self.flowrateDoNotAddFlowratePreference = preferences.Radio(
).getFromRadio('Do Not Add Flowrate', flowrateRadio, False)
self.archive.append(self.flowrateDoNotAddFlowratePreference)
self.flowrateMetricPreference = preferences.Radio().getFromRadio(
'Metric', flowrateRadio, False)
self.archive.append(self.flowrateMetricPreference)
self.flowratePWMPreference = preferences.Radio().getFromRadio(
'PWM Setting', flowrateRadio, True)
self.archive.append(self.flowratePWMPreference)
self.flowratePWMSetting = preferences.FloatPreference().getFromValue(
'Flowrate PWM Setting (if PWM Setting is Chosen):', 210.0)
self.archive.append(self.flowratePWMSetting)
self.orbitalFeedrateOverOperatingFeedrate = preferences.FloatPreference(
).getFromValue('Orbital Feedrate over Operating Feedrate (ratio):',
0.5)
self.archive.append(self.orbitalFeedrateOverOperatingFeedrate)
self.perimeterFeedrateOverOperatingFeedrate = preferences.FloatPreference(
).getFromValue('Perimeter Feedrate over Operating Feedrate (ratio):',
1.0)
self.archive.append(self.perimeterFeedrateOverOperatingFeedrate)
self.perimeterFlowrateOverOperatingFlowrate = preferences.FloatPreference(
).getFromValue('Perimeter Flowrate over Operating Flowrate (ratio):',
1.0)
self.archive.append(self.perimeterFlowrateOverOperatingFlowrate)
self.supportFlowrateOverOperatingFlowrate = preferences.FloatPreference(
).getFromValue('Support Flowrate over Operating Flowrate (ratio):',
1.0)
self.archive.append(self.supportFlowrateOverOperatingFlowrate)
self.travelFeedratePerSecond = preferences.FloatPreference(
).getFromValue('Travel Feedrate (mm/s):', 30.0)
self.archive.append(self.travelFeedratePerSecond)
#Create the archive, title of the execute button, title of the dialog & preferences fileName.
self.executeTitle = 'Speed'
self.saveTitle = 'Save Preferences'
preferences.setHelpPreferencesFileNameTitleWindowPosition(
self, 'skeinforge_tools.speed.html')
def __init__(self):
"Set the default preferences, execute title & preferences fileName."
#Set the default preferences.
self.archive = []
self.skeinforgeLabel = preferences.LabelDisplay().getFromName(
'Open Preferences: ')
self.archive.append(self.skeinforgeLabel)
skeinforgePluginFilenames = getSkeinforgeToolFilenames()
self.skeinforgeDisplayToolButtons = []
for skeinforgePluginFilename in skeinforgePluginFilenames:
skeinforgeDisplayToolButton = preferences.DisplayToolButton(
).getFromFolderName('skeinforge_tools', __file__,
skeinforgePluginFilename)
self.skeinforgeDisplayToolButtons.append(
skeinforgeDisplayToolButton)
self.archive += self.skeinforgeDisplayToolButtons
self.fileNameInput = preferences.Filename().getFromFilename(
interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File to be Skeinforged', '')
self.archive.append(self.fileNameInput)
#Create the archive, title of the execute button, title of the dialog & preferences fileName.
self.executeTitle = 'Skeinforge'
self.saveTitle = None
preferences.setHelpPreferencesFileNameTitleWindowPosition(
self, 'skeinforge.html')
def __init__(self):
"Set the default preferences, execute title & preferences fileName."
#Set the default preferences.
self.archive = []
self.activateExport = preferences.BooleanPreference().getFromValue(
'Activate Export', True)
self.archive.append(self.activateExport)
self.alsoSendOutputTo = preferences.StringPreference().getFromValue(
'Also Send Output To:', '')
self.archive.append(self.alsoSendOutputTo)
self.deleteComments = preferences.BooleanPreference().getFromValue(
'Delete Comments', True)
self.archive.append(self.deleteComments)
self.deleteM110GcodeLine = preferences.BooleanPreference(
).getFromValue('Delete M110 Gcode Line', True)
self.archive.append(self.deleteM110GcodeLine)
exportPluginFilenames = gcodec.getPluginFilenames(
'export_plugins', __file__)
self.exportLabel = preferences.LabelDisplay().getFromName(
'Export Operations: ')
self.archive.append(self.exportLabel)
self.exportOperations = []
self.exportPlugins = []
exportRadio = []
self.doNotChangeOutput = preferences.RadioCapitalized().getFromRadio(
'Do Not Change Output', exportRadio, True)
for exportPluginFilename in exportPluginFilenames:
exportPlugin = preferences.RadioCapitalized().getFromRadio(
exportPluginFilename, exportRadio, False)
self.exportPlugins.append(exportPlugin)
self.exportOperations = [self.doNotChangeOutput]
self.exportOperations += self.exportPlugins
self.exportOperations.sort(
key=preferences.RadioCapitalized.getLowerName)
self.exportOperationsButtons = []
for exportOperation in self.exportOperations:
self.exportOperationsButtons.append(exportOperation)
if exportOperation != self.doNotChangeOutput:
pluginModule = gcodec.getModule(exportOperation.name,
'export_plugins', __file__)
if pluginModule != None:
if pluginModule.isArchivable():
displayToolButtonBesidePrevious = preferences.DisplayToolButtonBesidePrevious(
).getFromFolderName('export_plugins', __file__,
exportOperation.name)
self.exportOperationsButtons.append(
displayToolButtonBesidePrevious)
self.archive += self.exportOperationsButtons
self.fileExtension = preferences.StringPreference().getFromValue(
'File Extension:', 'gcode')
self.archive.append(self.fileExtension)
self.fileNameInput = preferences.Filename().getFromFilename(
interpret.getGNUTranslatorGcodeFileTypeTuples(),
'Open File to be Exported', '')
self.archive.append(self.fileNameInput)
#Create the archive, title of the execute button, title of the dialog & preferences fileName.
self.executeTitle = 'Export'
self.saveTitle = 'Save Preferences'
preferences.setHelpPreferencesFileNameTitleWindowPosition(
self, 'skeinforge_tools.export.html')
def __init__(self):
"Set the default preferences, execute title & preferences fileName."
#Set the default preferences.
self.archive = []
self.extrusionWidthOverThickness = preferences.FloatPreference(
).getFromValue('Extrusion Width over Thickness (ratio):', 1.5)
self.archive.append(self.extrusionWidthOverThickness)
self.fileNameInput = preferences.Filename().getFromFilename(
interpret.getTranslatorFileTypeTuples(), 'Open File to be Carved',
'')
self.archive.append(self.fileNameInput)
self.importCoarseness = preferences.FloatPreference().getFromValue(
'Import Coarseness (ratio):', 1.0)
self.archive.append(self.importCoarseness)
self.meshTypeLabel = preferences.LabelDisplay().getFromName(
'Mesh Type: ')
self.archive.append(self.meshTypeLabel)
importRadio = []
self.correctMesh = preferences.Radio().getFromRadio(
'Correct Mesh', importRadio, True)
self.archive.append(self.correctMesh)
self.unprovenMesh = preferences.Radio().getFromRadio(
'Unproven Mesh', importRadio, False)
self.archive.append(self.unprovenMesh)
self.infillBridgeThicknessOverLayerThickness = preferences.FloatPreference(
).getFromValue('Infill Bridge Thickness over Layer Thickness (ratio):',
1.0)
self.archive.append(self.infillBridgeThicknessOverLayerThickness)
self.infillBridgeWidthOverExtrusionWidth = preferences.FloatPreference(
).getFromValue('Infill Bridge Width over Extrusion Width (ratio):',
1.0)
self.archive.append(self.infillBridgeWidthOverExtrusionWidth)
self.infillDirectionBridge = preferences.BooleanPreference(
).getFromValue('Infill in Direction of Bridges', True)
self.archive.append(self.infillDirectionBridge)
self.layerThickness = preferences.FloatPreference().getFromValue(
'Layer Thickness (mm):', 0.4)
self.archive.append(self.layerThickness)
self.layerThicknessOverPrecision = preferences.FloatPreference(
).getFromValue('Layer Thickness over Precision (ratio):', 10.0)
self.archive.append(self.layerThicknessOverPrecision)
#Create the archive, title of the execute button, title of the dialog & preferences fileName.
self.executeTitle = 'Carve'
self.saveTitle = 'Save Preferences'
preferences.setHelpPreferencesFileNameTitleWindowPosition(
self, 'skeinforge_tools.carve.html')
def __init__( self ): "Set the default preferences, execute title & preferences fileName." #Set the default preferences. self.archive = [] self.analyzeLabel = preferences.LabelDisplay().getFromName( 'Open Preferences: ' ) self.archive.append( self.analyzeLabel ) analyzePluginFilenames = getAnalyzePluginFilenames() self.analyzePlugins = [] for analyzePluginFilename in analyzePluginFilenames: analyzePlugin = preferences.DisplayToolButton().getFromFolderName( 'analyze_plugins', __file__, analyzePluginFilename ) self.analyzePlugins.append( analyzePlugin ) # self.analyzePlugins.sort( key = preferences.RadioCapitalized.getLowerName ) self.archive += self.analyzePlugins self.fileNameInput = preferences.Filename().getFromFilename( [ ( 'Gcode text files', '*.gcode' ) ], 'Open File to be Analyzed', '' ) self.archive.append( self.fileNameInput ) #Create the archive, title of the execute button, title of the dialog & preferences fileName. self.executeTitle = 'Analyze' self.saveTitle = None preferences.setHelpPreferencesFileNameTitleWindowPosition( self, 'skeinforge_tools.analyze.html' )
def __init__(self):
"Set the default preferences, execute title & preferences fileName."
#Set the default preferences.
self.archive = []
self.directoryOrFileChoiceLabel = preferences.LabelDisplay(
).getFromName('Directory or File Choice: ')
self.archive.append(self.directoryOrFileChoiceLabel)
directoryRadio = []
self.directoryPreference = preferences.Radio().getFromRadio(
'Execute All Unmodified Files in a Directory', directoryRadio,
False)
self.archive.append(self.directoryPreference)
self.filePreference = preferences.Radio().getFromRadio(
'Execute File', directoryRadio, True)
self.archive.append(self.filePreference)
#Create the archive, title of the dialog & preferences fileName.
self.executeTitle = None
self.saveTitle = 'Save Preferences'
preferences.setHelpPreferencesFileNameTitleWindowPosition(
self, 'skeinforge_tools.polyfile.html')
def __init__( self ): "Set the default preferences, execute title & preferences fileName." materialName = material.getSelectedMaterial() #Set the default preferences. self.archive = [] self.activateRaft = preferences.BooleanPreference().getFromValue( 'Activate Raft:', True ) self.archive.append( self.activateRaft ) self.addRaftElevateNozzleOrbitSetAltitude = preferences.BooleanPreference().getFromValue( 'Add Raft, Elevate Nozzle, Orbit and Set Altitude:', True ) self.archive.append( self.addRaftElevateNozzleOrbitSetAltitude ) self.baseInfillDensity = preferences.FloatPreference().getFromValue( 'Base Infill Density (ratio):', 0.5 ) self.archive.append( self.baseInfillDensity ) self.baseLayerThicknessOverLayerThickness = preferences.FloatPreference().getFromValue( 'Base Layer Thickness over Layer Thickness:', 2.0 ) self.archive.append( self.baseLayerThicknessOverLayerThickness ) self.baseLayers = preferences.IntPreference().getFromValue( 'Base Layers (integer):', 1 ) self.archive.append( self.baseLayers ) self.baseNozzleLiftOverHalfBaseLayerThickness = preferences.FloatPreference().getFromValue( 'Base Nozzle Lift over Half Base Layer Thickness (ratio):', 0.75 ) self.archive.append( self.baseNozzleLiftOverHalfBaseLayerThickness ) self.bottomAltitude = preferences.FloatPreference().getFromValue( 'Bottom Altitude:', 0.0 ) self.archive.append( self.bottomAltitude ) self.fileNameInput = preferences.Filename().getFromFilename( interpret.getGNUTranslatorGcodeFileTypeTuples(), 'Open File to be Rafted', '' ) self.archive.append( self.fileNameInput ) self.infillOverhang = preferences.FloatPreference().getFromValue( 'Infill Overhang (ratio):', 0.1 ) self.archive.append( self.infillOverhang ) self.interfaceInfillDensity = preferences.FloatPreference().getFromValue( 'Interface Infill Density (ratio):', 0.5 ) self.archive.append( self.interfaceInfillDensity ) self.interfaceLayerThicknessOverLayerThickness = preferences.FloatPreference().getFromValue( 'Interface Layer Thickness over Layer Thickness:', 1.0 ) self.archive.append( self.interfaceLayerThicknessOverLayerThickness ) self.interfaceLayers = preferences.IntPreference().getFromValue( 'Interface Layers (integer):', 2 ) self.archive.append( self.interfaceLayers ) self.interfaceNozzleLiftOverHalfInterfaceLayerThickness = preferences.FloatPreference().getFromValue( 'Interface Nozzle Lift over Half Interface Layer Thickness (ratio):', 1.0 ) self.archive.append( self.interfaceNozzleLiftOverHalfInterfaceLayerThickness ) self.material = preferences.LabelDisplay().getFromName( 'Material: ' + materialName ) self.archive.append( self.material ) self.operatingNozzleLiftOverHalfLayerThickness = preferences.FloatPreference().getFromValue( 'Operating Nozzle Lift over Half Layer Thickness (ratio):', 1.0 ) self.archive.append( self.operatingNozzleLiftOverHalfLayerThickness ) self.raftOutsetRadiusOverExtrusionWidth = preferences.FloatPreference().getFromValue( 'Raft Outset Radius over Extrusion Width (ratio):', 15.0 ) self.archive.append( self.raftOutsetRadiusOverExtrusionWidth ) self.supportInsetOverPerimeterExtrusionWidth = preferences.FloatPreference().getFromValue( 'Support Inset over Perimeter Extrusion Width (ratio):', 0.0 ) self.archive.append( self.supportInsetOverPerimeterExtrusionWidth ) supportRadio = [] self.supportChoiceLabel = preferences.LabelDisplay().getFromName( 'Support Material Choice: ' ) self.archive.append( self.supportChoiceLabel ) self.supportChoiceNoSupportMaterial = preferences.Radio().getFromRadio( 'No Support Material', supportRadio, True ) self.archive.append( self.supportChoiceNoSupportMaterial ) self.supportChoiceSupportMateriaEverywhere = preferences.Radio().getFromRadio( 'Support Material Everywhere', supportRadio, False ) self.archive.append( self.supportChoiceSupportMateriaEverywhere ) self.supportChoiceSupportMaterialOnExteriorOnly = preferences.Radio().getFromRadio( 'Support Material on Exterior Only', supportRadio, False ) self.archive.append( self.supportChoiceSupportMaterialOnExteriorOnly ) self.supportMinimumAngle = preferences.FloatPreference().getFromValue( 'Support Minimum Angle (degrees):', 60.0 ) self.archive.append( self.supportMinimumAngle ) self.temperatureChangeBeforeTimeRaft = preferences.FloatPreference().getFromValue( 'Temperature Change Time Before Raft (seconds):', 120.0 ) self.archive.append( self.temperatureChangeBeforeTimeRaft ) self.temperatureChangeTimeBeforeFirstLayerOutline = preferences.FloatPreference().getFromValue( 'Temperature Change Time Before First Layer Outline (seconds):', 120.0 ) self.archive.append( self.temperatureChangeTimeBeforeFirstLayerOutline ) self.temperatureChangeTimeBeforeNextThreads = preferences.FloatPreference().getFromValue( 'Temperature Change Time Before Next Threads (seconds):', 120.0 ) self.archive.append( self.temperatureChangeTimeBeforeNextThreads ) self.temperatureChangeTimeBeforeSupportLayers = preferences.FloatPreference().getFromValue( 'Temperature Change Time Before Support Layers (seconds):', 120.0 ) self.archive.append( self.temperatureChangeTimeBeforeSupportLayers ) self.temperatureChangeTimeBeforeSupportedLayers = preferences.FloatPreference().getFromValue( 'Temperature Change Time Before Supported Layers (seconds):', 120.0 ) self.archive.append( self.temperatureChangeTimeBeforeSupportedLayers ) self.temperatureRaft = preferences.FloatPreference().getFromValue( 'Temperature of Raft (Celcius):', 200.0 ) self.archive.append( self.temperatureRaft ) self.temperatureShapeFirstLayerOutline = preferences.FloatPreference().getFromValue( 'Temperature of Shape First Layer Outline (Celcius):', 220.0 ) self.archive.append( self.temperatureShapeFirstLayerOutline ) self.temperatureShapeFirstLayerWithin = preferences.FloatPreference().getFromValue( 'Temperature of Shape First Layer Within (Celcius):', 195.0 ) self.archive.append( self.temperatureShapeFirstLayerWithin ) self.temperatureShapeNextLayers = preferences.FloatPreference().getFromValue( 'Temperature of Shape Next Layers (Celcius):', 230.0 ) self.archive.append( self.temperatureShapeNextLayers ) self.temperatureShapeSupportLayers = preferences.FloatPreference().getFromValue( 'Temperature of Support Layers (Celcius):', 200.0 ) self.archive.append( self.temperatureShapeSupportLayers ) self.temperatureShapeSupportedLayers = preferences.FloatPreference().getFromValue( 'Temperature of Supported Layers (Celcius):', 230.0 ) self.archive.append( self.temperatureShapeSupportedLayers ) self.windowPositionRaftPreferences = preferences.WindowPosition().getFromValue( 'windowPositionRaft Preferences', '0+0' ) self.archive.append( self.windowPositionRaftPreferences ) #Create the archive, title of the execute button, title of the dialog & preferences fileName. self.executeTitle = 'Raft' self.fileNamePreferences = preferences.getPreferencesFilePath( 'raft_' + materialName + '.csv' ) self.fileNameHelp = 'skeinforge_tools.raft.html' self.saveTitle = 'Save Preferences' self.title = 'Raft Preferences'