def ioCurve():
slab.message(1, "Input between DAC1+ADC1 and GND")
slab.message(1, "Output between ADC2 and GND")
# Perform a DC sweep
x, y1, y2, y3, y4 = slab.dcSweep(1, 0.0, 3.0, 0.1)
# Plot result
slab.message(1, "Drawing curve")
slab.plot11(y1, y2, "V(V) Plot", "Input (V)", "Output(V)")
def distortion(v1, v2, freq, show=True):
points = int(slab.maxSFfresponse / freq)
if points > 100:
points = 100
if points < 50:
raise slab.SlabEx("Frequency too high")
cycles = 10
slab.waveCosine(v1, v2, points)
slab.setWaveFrequency(freq)
slab.tranStore(cycles * points)
t, s = slab.singleWaveResponse()
if show:
slab.plot11(t, s, "Time plot", "time(s)", "ADC1(V)")
c, f = ftransform(s, t)
if show:
ac.plotFreq(f, c)
# THD
base = np.abs(c[cycles])
tot = 0
for i in range(2, 7):
tot = tot + np.abs(c[i * cycles]) * np.abs(c[i * cycles])
tot = np.sqrt(tot)
print("tot: " + str(tot))
thd = 100.0 * tot / base
# THD+N
rms_total = std(s)
rms_signal = base / np.sqrt(2.0)
rms_no_signal = np.sqrt(rms_total * rms_total - rms_signal * rms_signal)
thdn = 100.0 * rms_no_signal / rms_signal
# Harmonic Distortion 2nd
h2 = dB(np.abs(c[2 * cycles]) / base)
# Harmonic Distortion 3rd
h3 = dB(np.abs(c[3 * cycles]) / base)
if show:
print()
print("THD : " + str(thd) + " %")
print("THD+N : " + str(thdn) + " %")
print("Harmonic distortion 2nd : " + str(h2) + " dBc")
print("Harmonic distortion 3rd : " + str(h3) + " dBc")
print()
return thd, thdn, h2, h3
def curveVI(v1,v2,vi=0.1,r=1.0,wt=0.1,returnData=False):
# Check if SciPy is loaded
slab.checkSciPy()
# Perform a DC sweep
x,y1,y2,y3,y4 = slab.dcSweep(1,v1,v2,vi,wt)
# Set DAC 1 to zero
slab.writeChannel(1,0.0)
# Plot result
slab.message(1,"Drawing curve")
vd = y2
id = (y1 - y2) / r
slab.plot11(vd,id,"V-I plot","Voltage (V)","Current (mA)")
if slab.plotReturnData or returnData:
return vd,id
def curveVV(v1,v2,vi=0.1,wt=0.1,adc2=False,returnData=False):
# Check if SciPy is loaded
slab.checkSciPy()
# Perform a DC sweep
x,y1,y2,y3,y4 = slab.dcSweep(1,v1,v2,vi,wt)
# Check ADC2 option
if adc2:
x = y2
# Plot result
slab.message(1,"Drawing curve")
slab.plot11(x,y1,"V(V) Plot","Input (V)","Output(V)")
if slab.plotReturnData or returnData:
return x,y1
def curveVVbridge(vp,vn,vi=0.1,vmin=0.0,wt=0.1,returnData=False):
# Check if SciPy is loaded
slab.checkSciPy()
# Perform the positive DC sweep
slab.message(1,"Positive curve")
slab.setVoltage(2,vmin)
xp,y1p,y2p,y3p,y4p = slab.dcSweep(1,vmin,vp,vi,wt)
# Perform the negative DC sweep
slab.message(1,"Negative curve")
slab.setVoltage(1,vmin)
xn,y1n,y2n,y3n,y4n = slab.dcSweep(2,vmin,vn,vi,wt)
# Join all measurements
x=[]
y=[]
ln = len(xn)
for i in range(0,ln):
pos = ln-i-1
xvalue = y1n[pos]-y2n[pos]
yvalue = y3n[pos]-y4n[pos]
x.append(xvalue)
y.append(yvalue)
lp = len(xp)
for i in range(0,lp):
xvalue = y1p[i]-y2p[i]
yvalue = y3p[i]-y4p[i]
x.append(xvalue)
y.append(yvalue)
x = np.array(x)
y = np.array(y)
# Plot result
slab.message(1,"Drawing curve")
slab.plot11(x,y,"V(V) Bridge Plot","Input (V)","Output (V)")
if slab.plotReturnData or returnData:
return x,y
def curveVVref(v1,v2,vi=0.1,wt=0.1,adc3=False,returnData=False):
# Check if SciPy is loaded
slab.checkSciPy()
# Perform a DC sweep
x,y1,y2,y3,y4 = slab.dcSweep(1,v1,v2,vi,wt)
# Check ADC3 option
if adc3:
x = y3
# Plot result
slab.message(1,"Drawing curve")
vi = x - y2
vo = y1 - y2
slab.plot11(vi,vo,"V(V) Plot with reference","Input (V)","Output(V)")
if slab.plotReturnData or returnData:
return vi,vo
def curveVIref(v1,v2,vi=0.1,r=1.0,vr=-1,wt=0.1,returnData=False):
# Check if SciPy is loaded
slab.checkSciPy()
# Perform a DC sweep
x,y1,y2,y3,y4 = slab.dcSweep(1,v1,v2,vi,wt)
# Set DAC 1 to Vdd/2
slab.setVoltage(1,slab.vdd/2)
# Plot result
req = r / 2
if vr < 0:
vr = slab.vdd / 2
vd = y1 - y2
id = (y2 - vr)/req
slab.message(1,"Drawing curve")
slab.plot11(vd,id,"V-I plot with reference","Voltage (V)","Current (mA)")
if slab.plotReturnData or returnData:
return vd,id
import slab_meas as meas
slab.setWaveFrequency(100)
slab.tranStore(500,1)
v = slab.waveResponse()
p = meas.period(v[1],v[0])
if not compare(p,0.01):
raise slab.SlabEx("period measurement fails")
print(' period measurement pass')
# FFT module test
print('FFT module test')
import slab_fft as fft
slab.tranStore(5000,1)
v = slab.waveResponse()
g,f=fft.ftransform(v[1],v[0])
slab.plot11(f,ac.dB(np.absolute(g)),"Frequency plot for 100 Hz tone","Frequency (Hz)","dB")
print()
print('All tests passed')
print()
# Set prefix to locate calibrations
slab.setFilePrefix("../")
# Open serial communication
slab.connect()
# Increase accuracy
slab.setDCreadings(50)
# V Device curve
print "Performing measurements..."
#x,y1,y2,y3,y4 = slab.dcSweep(1,0.6,1.6,0.05)
x, y1, y2, y3, y4 = slab.dcSweep(1, 1.0, 3.0, 0.1)
# Set DACs to zero
slab.zero()
# Post processing low current
#Ib = (x - y1)/100.0 # In mA
#Ic = (3.3 - y2)/1.0 # In mA
Ib = (x - y1) / 6.8 # In mA
Ic = (3.3 - y2) / 0.047 # In mA
beta = Ic / Ib
# Plot
print "Plotting"
slab.plot11(Ic, beta, "Beta vs Ic", "Ic (mA)", "Beta")
# Close serial communication
slab.disconnect()
# Locate slab in the parent folder
import sys
sys.path.append('..')
sys.path.append('.')
import slab
# Set prefix to locate calibrations
slab.setFilePrefix("../")
# (A) Sin plot
x = np.arange(0, 361, 1)
y = np.sin(np.pi * x / 180)
slab.plot11(x, y, "Sin plot", "Angle (deg)", "Sin(Angle)")
# (B) Sin,Cos plot
x = np.arange(0, 361, 1)
y1 = np.sin(np.pi * x / 180)
y2 = np.cos(np.pi * x / 180)
slab.plot1n(x, [y1, y2], "Sin and Cos plot", "Angle (deg)", "Sin,Cos(Angle)",
["Sin", "Cos"])
# (C) Sin,Cos plot
# Different ranges and resolutions
x1 = np.arange(0, 721, 1)
y1 = np.sin(np.pi * x1 / 180)