def testState():
s1 = FluidState('ParaHydrogen')
s1.update('P', 700e5, 'T', 288)
print("p={0}".format(s1.p()))
print("T={0}".format(s1.T()))
print("rho={0}".format(s1.rho()))
print("h={0}".format(s1.h()))
print("s={0}".format(s1.s()))
print("cp={0}".format(s1.cp()))
print("cv={0}".format(s1.cv()))
print("gamma={0}".format(s1.gamma()))
print("dpdt_v={0}".format(s1.dpdt_v()))
print("dpdv_t={0}".format(s1.dpdv_t()))
print("beta={0}".format(s1.beta()))
print("mu={0}".format(s1.mu()))
print("lambfa={0}".format(s1.cond()))
print("Pr={0}".format(s1.Pr()))
s2 = FluidState('ParaHydrogen')
s2.update_Tp(s1.T(), s1.p())
print("update_Tp rho={0}".format(s2.rho()))
s3 = FluidState('ParaHydrogen')
s3.update_Trho(s1.T(), s1.rho())
print("update_Trho p={0}".format(s3.p()))
s4 = FluidState('ParaHydrogen')
s4.update_prho(s1.p(), s1.rho())
print("update_prho T={0}".format(s4.T()))
s5 = FluidState('ParaHydrogen')
s5.update_ph(s1.p(), s1.h())
print("update_ph ={0}".format(s5.T()))
s6 = FluidState('ParaHydrogen')
s6.update_ps(s1.p(), s1.s())
print("update_ps T={0}".format(s6.T()))
s7 = FluidState('ParaHydrogen')
s7.update_pq(1e5, 0)
print("update_pq T={0}".format(s7.T()))
s8 = FluidState('ParaHydrogen')
s8.update_Tq(25, 0)
print("update_Tq p={0}".format(s8.p()))
print('--------------------')
print('Initialize state from fluid')
h2 = Fluid('ParaHydrogen')
s9 = FluidState(h2)
s9.update_Tp(s1.T(), s1.p())
print("rho={0}".format(s9.rho()))
import numpy as np
from smo.media.CoolProp.CoolProp import FluidState, Fluid
fluid = Fluid('Water')
dT = 1e-4
dq = 1e-3
f1 = FluidState(fluid)
f2 = FluidState(fluid)
f1.update_Tq(273.15 + 150, 0.5)
# dqdT_v
f2.update_Trho(f1.T + dT, f1.rho)
dqdT_v = (f2.q - f1.q) / (f2.T - f1.T)
print ("dqdT_v() numerical: {:e}, analytical: {:e}".format(dqdT_v, f1.dqdT_v))
# dvdT_q
f2.update_Tq(f1.T + dT, f1.q)
dvdT_q = (f2.v - f1.v) / (f2.T - f1.T)
dvdT_q_1 = f1.q * f1.SatV.dvdT + (1 - f1.q) * f1.SatL.dvdT
print ("dvdT_q() numerical: {:e}, analytical: {:e}, analytical2: {:e}".format(dvdT_q, f1.dvdT_q, dvdT_q_1))
# dvdq_T
f2.update_Tq(f1.T, f1.q + dq)
dvdq_T = (f2.v - f1.v) / (f2.q - f1.q)
print ("dvdq_T() numerical: {:e}, analytical: {:e}".format(dvdq_T, f1.dvdq_T))
# dsdT_q
def plotIsotherms(self):
fState = FluidState(self.fluid)
TArr = np.logspace(np.log10(self.TMin), np.log10(self.TMax), num=20)
TOrders = np.floor(np.log10(TArr))
TArr = np.ceil(TArr / 10**(TOrders - 2)) * 10**(TOrders - 2)
fSatL = FluidState(self.fluidName)
fSatV = FluidState(self.fluidName)
f1 = FluidState(self.fluidName)
for T in TArr:
if self.temperatureUnit == 'degC':
T_label = T - 273.15
else:
T_label = T
try:
f1.update_Tp(T, self.pMax)
if (T > self.critical.T):
rhoArr1 = np.logspace(np.log10(self.rhoMin),
np.log10(self.critical.rho),
num=100)
rhoArr2 = np.logspace(np.log10(self.critical.rho),
np.log10(f1.rho),
num=100)
else:
fSatL.update_Tq(T, 0)
fSatV.update_Tq(T, 1)
rhoArr1 = np.logspace(np.log10(self.rhoMin),
np.log10(fSatV.rho),
num=100)
rhoArr2 = np.logspace(np.log10(fSatL.rho),
np.log10(f1.rho),
num=100)
rhoArr = np.hstack((rhoArr1, rhoArr2))
hArr = np.zeros(len(rhoArr))
pArr = np.zeros(len(rhoArr))
for i in range(len(rhoArr)):
fState.update_Trho(T, rhoArr[i])
hArr[i] = fState.h
pArr[i] = fState.p
# Determining label location
if (T < self.critical.T):
if (i == len(rhoArr1)):
self.ax.annotate(formatNumber(T_label, sig=3),
xy=((fSatL.h + fSatV.h) / 2. /
1e3, pArr[i] / 1e5),
xytext=(0, 3),
textcoords='offset points',
color='r',
size="small")
else:
if (i > 0):
b = np.log10(
self.pMin /
1e5) - self.minDiagonalSlope * self.hMin / 1e3
if (np.log10(pArr[i-1] / 1e5) - self.minDiagonalSlope * hArr[i-1] / 1e3 - b) * \
(np.log10(pArr[i] / 1e5) - self.minDiagonalSlope * hArr[i] / 1e3 - b) <= 0:
# Getting label rotation angle
angle, offset_x, offset_y = self.getLabelPlacement(
x1=hArr[i - 1],
x2=hArr[i],
y1=pArr[i - 1],
y2=pArr[i])
self.ax.annotate(formatNumber(T_label, sig=3),
xy=(hArr[i] / 1e3,
pArr[i] / 1e5),
xytext=(offset_x, offset_y),
textcoords='offset points',
color='r',
size="small",
rotation=angle)
if (T == TArr[0]):
if self.temperatureUnit == 'degC':
label = "temperature [C]"
else:
label = "temperature [K]"
self.ax.semilogy(hArr / 1e3, pArr / 1e5, 'r', label=label)
else:
self.ax.semilogy(hArr / 1e3, pArr / 1e5, 'r')
except RuntimeError, e:
print '------------------'
print 'Runtime Warning for T=%e' % T
print(e)
def plotIsentrops(self):
fState = FluidState(self.fluid)
sArr = np.linspace(self.sMin, self.sMax, num=20)
for s in sArr:
try:
hArr = []
pArr = []
fState.update_ps(self.pMax, s)
if (fState.T > self.TMax):
fState.update_Ts(self.TMax, s)
T = fState.T
hArr.append(fState.h)
pArr.append(fState.p)
# Calculated v
v_res = fState.v
while (T > self.TMin):
_dvdT_s = -fState.dsdT_v / fState.dpdT_v
if math.isnan(_dvdT_s):
break
TStep = -(self.critical.T / 200.) / (np.abs(_dvdT_s) + 1)
T = T + TStep
if T < self.TMin:
break
v_res += _dvdT_s * TStep
fState.update_Trho(T, 1. / v_res)
p = fState.p
# If it goes out of the screen through the bottom
if (p < self.pMin):
break
# Calculated s
s_res = fState.s
# Correcting v
ds = s - s_res
sigma = ds * fState.dvds_T
v = v_res + sigma
fState.update_Trho(T, 1. / v)
hArr.append(fState.h)
pArr.append(fState.p)
##################
# Putting labels
i = len(hArr) - 1
b = np.log10(self.pMax /
1e5) - self.majDiagonalSlope * self.hMin / 1e3
if (np.log10(pArr[i-1] / 1e5) - self.majDiagonalSlope * hArr[i-1] / 1e3 - b) * \
(np.log10(pArr[i] / 1e5) - self.majDiagonalSlope * hArr[i] / 1e3 - b) <= 0:
angle, offset_x, offset_y = self.getLabelPlacement(
x1=hArr[i - 1],
x2=hArr[i],
y1=pArr[i - 1],
y2=pArr[i])
self.ax.annotate(formatNumber(s / 1e3, sig=3),
xy=(hArr[i - 1] / 1e3,
pArr[i - 1] / 1e5),
xytext=(-offset_x, -offset_y),
textcoords='offset points',
color='m',
size="small",
rotation=angle)
#######################
hArr = np.array(hArr)
pArr = np.array(pArr)
if (s == sArr[0]):
self.ax.semilogy(hArr / 1e3,
pArr / 1e5,
'm',
label="entropy [kJ/kg-K]")
else:
self.ax.semilogy(hArr / 1e3, pArr / 1e5, 'm')
except RuntimeError, e:
print '------------------'
print 'Runtime Warning for s=%e' % s
print e
class PHDiagram(StateDiagram):
def __init__(self, fluidName, temperatureUnit='K'):
super(PHDiagram, self).__init__(fluidName)
self.temperatureUnit = temperatureUnit
def setLimits(self, pMin=None, pMax=None, hMin=None, hMax=None, TMax=None):
# Reference points
self.minLiquid = FluidState(self.fluid)
self.minVapor = FluidState(self.fluid)
self.critical = FluidState(self.fluid)
self.critical.update_Trho(self.fluid.critical['T'],
self.fluid.critical['rho'])
# For general use
fState = FluidState(self.fluid)
# Pressure range
if (pMin is None):
pMin = self.fluid.tripple['p'] * 1.05
if (pMin < 1e3):
pMin = 1e3
self.pMin = pMin
self.minLiquid.update_pq(self.pMin, 0)
self.minVapor.update_pq(self.pMin, 1)
if (pMax is None):
pMax = 3 * self.critical.p
self.pMax = pMax
# Enthalpy range
domeWidth = self.minVapor.h - self.minLiquid.h
if (hMin is None):
hMin = self.minLiquid.h
self.hMin = hMin
# Determining max enthalpy
if (TMax is None):
if (hMax is None):
# default max enthalpy
if (self.critical.h > self.minVapor.h):
hMax = self.critical.h + domeWidth
else:
hMax = self.minVapor.h + domeWidth
else:
fState.update_Tp(TMax, self.pMin)
hMax = fState.h
self.hMax = hMax
# Axes ranges
self.xMin = self.hMin
self.xMax = self.hMax
self.yMin = self.pMin
self.yMax = self.pMax
# Density range
fState.update_ph(self.pMin, self.hMax)
self.rhoMin = fState.rho
self.rhoMax = self.minLiquid.rho
# Temperature range
self.TMin = self.fluid.saturation_p(self.pMin)["TsatL"]
if (TMax is None):
fState.update_ph(self.pMin, self.hMax)
TMax = fState.T
self.TMax = TMax
# Entropy range
self.sMin = 1.01 * self.minLiquid.s
fState.update_ph(self.pMin, self.hMax)
self.sMax = fState.s
# Minor diagonal coeff
self.minDiagonalSlope = np.log10(
self.pMax / self.pMin) / (self.hMax - self.hMin) * 1e3
# Major diagonal coeff
self.majDiagonalSlope = -self.minDiagonalSlope
def plotDome(self):
fState = FluidState(self.fluid)
p = np.logspace(np.log10(self.pMin),
np.log10(self.critical.p),
num=200)
qLabels = ['0.2', '0.4', '0.6', '0.8']
for q in np.arange(0, 1.1, 0.1):
try:
h = np.zeros(len(p))
for i in range(len(p) - 1):
fState.update_pq(p[i], q)
h[i] = fState.h
# Putting labels
if '{:1.1f}'.format(q) in qLabels:
angle, offset_x, offset_y = self.getLabelPlacement(
x1=h[9], x2=h[10], y1=p[9], y2=p[10])
self.ax.annotate("{:1.1f}".format(q),
xy=(h[10] / 1e3, p[10] / 1e5),
xytext=(-offset_x, -offset_y),
textcoords='offset points',
color='b',
size="small",
rotation=angle)
h[-1] = self.critical.h
if (q == 0):
self.ax.semilogy(h / 1e3,
p / 1e5,
'b',
label='vapor quality')
else:
self.ax.semilogy(h / 1e3, p / 1e5, 'b')
except RuntimeError, e:
print '------------------'
print 'Runtime Warning for q=%e' % q
print(e)
def plotIsochores(self):
fState = FluidState(self.fluid)
rhoArr1 = np.logspace(np.log10(self.rhoMin),
np.log10(self.critical.rho),
num=20,
endpoint=False)
rhoArr2 = np.logspace(np.log10(self.critical.rho),
np.log10(self.rhoMax),
num=5)
rhoArr = np.zeros(len(rhoArr1) + len(rhoArr2))
rhoArr[:len(rhoArr1)] = rhoArr1[:]
rhoArr[len(rhoArr1):] = rhoArr2[:]
TArr = np.logspace(np.log10(self.TMin), np.log10(self.TMax), num=100)
# For label location purposes
h_level_low = self.hMin + (self.critical.h - self.hMin) * 3 / 4.
h_level_high = self.critical.h + (self.hMax - self.critical.h) * 1 / 2.
for rho in rhoArr:
try:
hArr = np.zeros(len(TArr))
pArr = np.zeros(len(TArr))
for i in range(len(TArr)):
fState.update_Trho(TArr[i], rho)
hArr[i] = fState.h
pArr[i] = fState.p
# Putting labels
# Determining annotated point and label text offest
if (pArr[i - 1] < self.pMax and pArr[i] > self.pMax):
if (hArr[i] < h_level_low):
angle, offset_x, offset_y = self.getLabelPlacement(
x1=hArr[i - 1],
x2=hArr[i],
y1=pArr[i - 1],
y2=pArr[i])
self.ax.annotate(formatNumber(rho, sig=2),
xy=(hArr[i - 1] / 1e3,
pArr[i - 1] / 1e5),
xytext=(0, -10),
textcoords='offset points',
color='g',
size="small",
rotation=angle)
elif (hArr[i] > h_level_low
and hArr[i] < h_level_high):
angle, offset_x, offset_y = self.getLabelPlacement(
x1=hArr[i - 2],
x2=hArr[i - 1],
y1=pArr[i - 2],
y2=pArr[i - 1])
self.ax.annotate(formatNumber(rho, sig=2),
xy=(hArr[i - 2] / 1e3,
pArr[i - 2] / 1e5),
xytext=(5, -5),
textcoords='offset points',
color='g',
size="small",
rotation=angle)
elif (hArr[i] > h_level_high):
angle, offset_x, offset_y = self.getLabelPlacement(
x1=hArr[i - 10],
x2=hArr[i - 9],
y1=pArr[i - 10],
y2=pArr[i - 9])
self.ax.annotate(formatNumber(rho, sig=2),
xy=(hArr[i - 10] / 1e3,
pArr[i - 10] / 1e5),
xytext=(0, -5),
textcoords='offset points',
color='g',
size="small",
rotation=angle)
elif (i == len(TArr) - 1 and pArr[i] < self.pMax
and pArr[i - 1] > self.pMin):
angle, offset_x, offset_y = self.getLabelPlacement(
x1=hArr[i - 1],
x2=hArr[i],
y1=pArr[i - 1],
y2=pArr[i])
self.ax.annotate(formatNumber(rho, sig=2),
xy=(hArr[i] / 1e3, pArr[i] / 1e5),
xytext=(-30, -12),
textcoords='offset points',
color='g',
size="small",
rotation=angle)
if (rho == rhoArr[0]):
self.ax.semilogy(hArr / 1e3,
pArr / 1e5,
'g',
label='density [kg/m3]')
else:
self.ax.semilogy(hArr / 1e3, pArr / 1e5, 'g')
except RuntimeError, e:
print '------------------'
print 'Runtime Warning for rho=%e' % rho
print(e)
def plotIsentrops(self): fState = FluidState(self.fluid) sArr = np.linspace(self.sMin, self.sMax, num = 20) for s in sArr: try: hArr = [] pArr = [] fState.update_ps(self.pMax, s) if (fState.T > self.TMax): fState.update_Ts(self.TMax, s) T = fState.T hArr.append(fState.h) pArr.append(fState.p) # Calculated v v_res = fState.v while (T > self.TMin): _dvdT_s = - fState.dsdT_v / fState.dpdT_v if math.isnan(_dvdT_s ): break TStep = - (self.critical.T / 200.) / (np.abs(_dvdT_s) + 1) T = T + TStep if T < self.TMin: break v_res += _dvdT_s * TStep fState.update_Trho(T, 1. / v_res) p = fState.p # If it goes out of the screen through the bottom if (p < self.pMin): break # Calculated s s_res = fState.s # Correcting v ds = s - s_res sigma = ds * fState.dvds_T v = v_res + sigma fState.update_Trho(T, 1. / v) hArr.append(fState.h) pArr.append(fState.p) ################## # Putting labels i = len(hArr) - 1 b = np.log10(self.pMax / 1e5) - self.majDiagonalSlope * self.hMin / 1e3 if (np.log10(pArr[i-1] / 1e5) - self.majDiagonalSlope * hArr[i-1] / 1e3 - b) * \ (np.log10(pArr[i] / 1e5) - self.majDiagonalSlope * hArr[i] / 1e3 - b) <= 0: angle, offset_x, offset_y = self.getLabelPlacement(x1 = hArr[i-1], x2 = hArr[i], y1 = pArr[i-1], y2 = pArr[i]) self.ax.annotate(formatNumber(s/1e3, sig = 3), xy = (hArr[i-1]/1e3, pArr[i-1]/1e5), xytext=(-offset_x, -offset_y), textcoords='offset points', color='m', size="small", rotation = angle) ####################### hArr = np.array(hArr) pArr = np.array(pArr) if (s == sArr[0]): self.ax.semilogy(hArr/1e3, pArr/1e5, 'm', label = "entropy [kJ/kg-K]") else: self.ax.semilogy(hArr/1e3, pArr/1e5, 'm') except RuntimeError, e: print '------------------' print 'Runtime Warning for s=%e'%s print e
def plotIsotherms(self): fState = FluidState(self.fluid) TArr = np.logspace(np.log10(self.TMin), np.log10(self.TMax), num = 20) TOrders = np.floor(np.log10(TArr)) TArr = np.ceil(TArr / 10**(TOrders - 2)) * 10**(TOrders - 2) fSatL = FluidState(self.fluidName) fSatV = FluidState(self.fluidName) f1 = FluidState(self.fluidName) for T in TArr: if self.temperatureUnit == 'degC': T_label = T - 273.15 else: T_label = T try: f1.update_Tp(T, self.pMax) if (T > self.critical.T): rhoArr1 = np.logspace(np.log10(self.rhoMin), np.log10(self.critical.rho), num = 100) rhoArr2 = np.logspace(np.log10(self.critical.rho), np.log10(f1.rho), num = 100) else: fSatL.update_Tq(T, 0) fSatV.update_Tq(T, 1) rhoArr1 = np.logspace(np.log10(self.rhoMin), np.log10(fSatV.rho), num = 100) rhoArr2 = np.logspace(np.log10(fSatL.rho), np.log10(f1.rho), num = 100) rhoArr = np.hstack((rhoArr1, rhoArr2)) hArr = np.zeros(len(rhoArr)) pArr = np.zeros(len(rhoArr)) for i in range(len(rhoArr)): fState.update_Trho(T, rhoArr[i]) hArr[i] = fState.h pArr[i] = fState.p # Determining label location if (T < self.critical.T): if (i == len(rhoArr1)): self.ax.annotate(formatNumber(T_label, sig = 3), xy = ((fSatL.h + fSatV.h) / 2. / 1e3, pArr[i] / 1e5), xytext=(0, 3), textcoords='offset points', color='r', size="small") else: if (i>0): b = np.log10(self.pMin / 1e5) - self.minDiagonalSlope * self.hMin / 1e3 if (np.log10(pArr[i-1] / 1e5) - self.minDiagonalSlope * hArr[i-1] / 1e3 - b) * \ (np.log10(pArr[i] / 1e5) - self.minDiagonalSlope * hArr[i] / 1e3 - b) <= 0: # Getting label rotation angle angle, offset_x, offset_y = self.getLabelPlacement(x1 = hArr[i-1], x2 = hArr[i], y1 = pArr[i-1], y2 = pArr[i]) self.ax.annotate(formatNumber(T_label, sig = 3), xy = (hArr[i]/1e3, pArr[i]/1e5), xytext=(offset_x, offset_y), textcoords='offset points', color='r', size="small", rotation = angle) if (T == TArr[0]): if self.temperatureUnit == 'degC': label = "temperature [C]" else: label = "temperature [K]" self.ax.semilogy(hArr/1e3, pArr/1e5, 'r', label = label) else: self.ax.semilogy(hArr/1e3, pArr/1e5, 'r') except RuntimeError, e: print '------------------' print 'Runtime Warning for T=%e'%T print(e)
def plotIsochores(self): fState = FluidState(self.fluid) rhoArr1 = np.logspace(np.log10(self.rhoMin), np.log10(self.critical.rho), num = 20, endpoint = False) rhoArr2 = np.logspace(np.log10(self.critical.rho), np.log10(self.rhoMax), num = 5) rhoArr = np.zeros(len(rhoArr1) + len(rhoArr2)) rhoArr[:len(rhoArr1)] = rhoArr1[:] rhoArr[len(rhoArr1):] = rhoArr2[:] TArr = np.logspace(np.log10(self.TMin), np.log10(self.TMax), num = 100) # For label location purposes h_level_low = self.hMin + (self.critical.h - self.hMin) * 3 / 4. h_level_high = self.critical.h + (self.hMax - self.critical.h) * 1 / 2. for rho in rhoArr: try: hArr = np.zeros(len(TArr)) pArr = np.zeros(len(TArr)) for i in range(len(TArr)): fState.update_Trho(TArr[i], rho) hArr[i] = fState.h pArr[i] = fState.p # Putting labels # Determining annotated point and label text offest if (pArr[i-1] < self.pMax and pArr[i] > self.pMax): if (hArr[i] < h_level_low): angle, offset_x, offset_y = self.getLabelPlacement(x1 = hArr[i-1], x2 = hArr[i], y1 = pArr[i-1], y2 = pArr[i]) self.ax.annotate(formatNumber(rho, sig = 2), xy = (hArr[i-1] / 1e3, pArr[i-1] / 1e5), xytext=(0, -10), textcoords='offset points', color='g', size="small", rotation = angle) elif (hArr[i] > h_level_low and hArr[i] < h_level_high): angle, offset_x, offset_y = self.getLabelPlacement(x1 = hArr[i-2], x2 = hArr[i-1], y1 = pArr[i-2], y2 = pArr[i-1]) self.ax.annotate(formatNumber(rho, sig = 2), xy = (hArr[i-2] / 1e3, pArr[i-2] / 1e5), xytext=(5, -5), textcoords='offset points', color='g', size="small", rotation = angle) elif (hArr[i] > h_level_high): angle, offset_x, offset_y = self.getLabelPlacement(x1 = hArr[i-10], x2 = hArr[i-9], y1 = pArr[i-10], y2 = pArr[i-9]) self.ax.annotate(formatNumber(rho, sig = 2), xy = (hArr[i-10] / 1e3, pArr[i-10] / 1e5), xytext=(0, -5), textcoords='offset points', color='g', size="small", rotation = angle) elif (i == len(TArr) - 1 and pArr[i] < self.pMax and pArr[i-1] > self.pMin): angle, offset_x, offset_y = self.getLabelPlacement(x1 = hArr[i-1], x2 = hArr[i], y1 = pArr[i-1], y2 = pArr[i]) self.ax.annotate(formatNumber(rho, sig = 2), xy = (hArr[i] / 1e3, pArr[i] / 1e5), xytext=(-30, -12), textcoords='offset points', color='g', size="small", rotation = angle) if (rho == rhoArr[0]): self.ax.semilogy(hArr/1e3, pArr/1e5, 'g', label = 'density [kg/m3]') else: self.ax.semilogy(hArr/1e3, pArr/1e5, 'g') except RuntimeError, e: print '------------------' print 'Runtime Warning for rho=%e'%rho print(e)
class PHDiagram(StateDiagram):
def __init__(self, fluidName, temperatureUnit = 'K'):
super(PHDiagram, self).__init__(fluidName)
self.temperatureUnit = temperatureUnit
def setLimits(self, pMin = None, pMax = None, hMin = None, hMax = None, TMax = None):
# Reference points
self.minLiquid = FluidState(self.fluid)
self.minVapor = FluidState(self.fluid)
self.critical = FluidState(self.fluid)
self.critical.update_Trho(self.fluid.critical['T'], self.fluid.critical['rho'])
# For general use
fState = FluidState(self.fluid)
# Pressure range
if (pMin is None):
pMin = self.fluid.tripple['p'] * 1.05
if (pMin < 1e3):
pMin = 1e3
self.pMin = pMin
self.minLiquid.update_pq(self.pMin, 0)
self.minVapor.update_pq(self.pMin, 1)
if (pMax is None):
pMax = 3 * self.critical.p
self.pMax = pMax
# Enthalpy range
domeWidth = self.minVapor.h - self.minLiquid.h
if (hMin is None):
hMin = self.minLiquid.h
self.hMin = hMin
# Determining max enthalpy
if (TMax is None):
if (hMax is None):
# default max enthalpy
if (self.critical.h > self.minVapor.h):
hMax = self.critical.h + domeWidth
else:
hMax = self.minVapor.h + domeWidth
else:
fState.update_Tp(TMax, self.pMin)
hMax = fState.h
self.hMax = hMax
# Axes ranges
self.xMin = self.hMin
self.xMax = self.hMax
self.yMin = self.pMin
self.yMax = self.pMax
# Density range
fState.update_ph(self.pMin, self.hMax)
self.rhoMin = fState.rho
self.rhoMax = self.minLiquid.rho
# Temperature range
self.TMin = self.fluid.saturation_p(self.pMin)["TsatL"]
if (TMax is None):
fState.update_ph(self.pMin, self.hMax)
TMax = fState.T
self.TMax = TMax
# Entropy range
self.sMin = 1.01 * self.minLiquid.s
fState.update_ph(self.pMin, self.hMax)
self.sMax = fState.s
# Minor diagonal coeff
self.minDiagonalSlope = np.log10(self.pMax/self.pMin) / (self.hMax - self.hMin) * 1e3
# Major diagonal coeff
self.majDiagonalSlope = - self.minDiagonalSlope
def plotDome(self):
fState = FluidState(self.fluid)
p = np.logspace(np.log10(self.pMin), np.log10(self.critical.p), num = 200)
qLabels = ['0.2', '0.4', '0.6', '0.8']
for q in np.arange(0, 1.1, 0.1):
try:
h = np.zeros(len(p))
for i in range(len(p) - 1):
fState.update_pq(p[i], q)
h[i] = fState.h
# Putting labels
if '{:1.1f}'.format(q) in qLabels:
angle, offset_x, offset_y = self.getLabelPlacement(x1 = h[9], x2 = h[10],
y1 = p[9], y2 = p[10])
self.ax.annotate("{:1.1f}".format(q),
xy = (h[10]/ 1e3, p[10] / 1e5),
xytext=(-offset_x, -offset_y),
textcoords='offset points',
color='b', size="small", rotation = angle)
h[-1] = self.critical.h
if (q == 0):
self.ax.semilogy(h/1e3, p/1e5, 'b', label = 'vapor quality')
else:
self.ax.semilogy(h/1e3, p/1e5, 'b')
except RuntimeError, e:
print '------------------'
print 'Runtime Warning for q=%e'%q
print(e)
import numpy as np
from smo.media.CoolProp.CoolProp import FluidState, Fluid
fluid = Fluid('Water')
dT = 1e-4
dq = 1e-3
f1 = FluidState(fluid)
f2 = FluidState(fluid)
f1.update_Tq(273.15 + 150, 0.5)
# dqdT_v
f2.update_Trho(f1.T + dT, f1.rho)
dqdT_v = (f2.q - f1.q) / (f2.T - f1.T)
print("dqdT_v() numerical: {:e}, analytical: {:e}".format(dqdT_v, f1.dqdT_v))
# dvdT_q
f2.update_Tq(f1.T + dT, f1.q)
dvdT_q = (f2.v - f1.v) / (f2.T - f1.T)
dvdT_q_1 = f1.q * f1.SatV.dvdT + (1 - f1.q) * f1.SatL.dvdT
print("dvdT_q() numerical: {:e}, analytical: {:e}, analytical2: {:e}".format(
dvdT_q, f1.dvdT_q, dvdT_q_1))
# dvdq_T
f2.update_Tq(f1.T, f1.q + dq)
dvdq_T = (f2.v - f1.v) / (f2.q - f1.q)
print("dvdq_T() numerical: {:e}, analytical: {:e}".format(dvdq_T, f1.dvdq_T))
