def getNetworksAsJson(interfaceName, gpsData, huntChannelList=None):
# This is only used by the remote agent to get and return networks
if (huntChannelList is None) or (len(huntChannelList) == 0):
# This code handles the thought that "what if we query for networks and the interface
# reports busy (it does happen if we query too fast.)
retries = 0
retCode = WirelessNetwork.ERR_DEVICEBUSY
while (retCode == WirelessNetwork.ERR_DEVICEBUSY) and (retries < 3):
# Handle retries in case we get a busy response
retCode, errString, wirelessNetworks = WirelessEngine.scanForNetworks(interfaceName)
retries += 1
if retCode == WirelessNetwork.ERR_DEVICEBUSY:
sleep(0.4)
else:
wirelessNetworks = {}
for curFrequency in huntChannelList:
# Handle if the device reports busy with some retries
retries = 0
retCode = WirelessNetwork.ERR_DEVICEBUSY
while (retCode == WirelessNetwork.ERR_DEVICEBUSY) and (retries < 3):
# Handle retries in case we get a busy response
retCode, errString, tmpWirelessNetworks = WirelessEngine.scanForNetworks(interfaceName,curFrequency )
retries += 1
if retCode == WirelessNetwork.ERR_DEVICEBUSY:
sleep(0.2)
for curKey in tmpWirelessNetworks.keys():
curNet = tmpWirelessNetworks[curKey]
wirelessNetworks[curNet.getKey()] = tmpWirelessNetworks[curNet.getKey()]
retVal = {}
retVal['errCode'] = retCode
retVal['errString'] = errString
netList = []
for curKey in wirelessNetworks.keys():
curNet = wirelessNetworks[curKey]
if gpsData is not None:
curNet.gps.copy(gpsData)
netList.append(curNet.toJsondict())
gpsdict = {}
gpsloc = SparrowGPS()
if (gpsData is not None):
gpsloc.copy(gpsData)
gpsdict['latitude'] = gpsloc.latitude
gpsdict['longitude'] = gpsloc.longitude
gpsdict['altitude'] = gpsloc.altitude
gpsdict['speed'] = gpsloc.speed
retVal['gps'] = gpsdict
retVal['networks'] = netList
jsonstr = json.dumps(retVal)
return retCode, errString, jsonstr
def __init__(self):
self.macAddr = ""
self.ssid = ""
self.mode = "" # master, managed, monitor, etc.
self.security = "Open" # on or off
self.privacy = "None" # group cipher
self.cipher = "" # pairwise cipher
self.channel = 0 # Channel #
self.frequency = 0
self.signal = -1000 # dBm
self.stationcount = -1
self.utilization = -1.0
self.bandwidth = 20 # Default to 20. we'll bump it up as we see params. max BW in any protocol 20 or 40 or 80 or 160 MHz
self.secondaryChannel = 0 # used for 40+ MHz
self.thirdChannel = 0 # used for 80+ MHz channels
self.secondaryChannelLocation = '' # above/below
now=datetime.datetime.now()
self.firstSeen = now
self.lastSeen = now
self.gps = SparrowGPS()
self.strongestsignal = self.signal
self.strongestgps = SparrowGPS()
# Used for tracking in network table
self.foundInList = False
super().__init__()
def getNetworksAsJson(self, gpsData):
# This reads the scan file
airodumpcsvfile = '/dev/shm/falconairodump-01.csv'
retVal = {}
retVal['errCode'] = 0
retVal['errString'] = ''
if os.path.isfile(airodumpcsvfile):
networks, clients = FalconWirelessEngine.parseAiroDumpCSV(airodumpcsvfile)
errCode = 0
errmsg = ''
else:
errCode = 1
errmsg = 'Temp scan file not found. Scan may not be running.'
retVal['errCode'] = errCode
retVal['errString'] = errmsg
networks = {}
clients = {}
netList = []
if networks:
for curKey in networks.keys():
curNet = networks[curKey]
if gpsData is not None:
curNet.gps.copy(gpsData)
netList.append(curNet.toJsondict())
clientList = []
if clients:
for curKey in clients.keys():
curClient = clients[curKey]
if gpsData is not None:
curClient.gps.copy(gpsData)
clientList.append(curClient.toJsondict())
gpsdict = {}
gpsloc = SparrowGPS()
if (gpsData is not None):
gpsloc.copy(gpsData)
gpsdict['latitude'] = gpsloc.latitude
gpsdict['longitude'] = gpsloc.longitude
gpsdict['altitude'] = gpsloc.altitude
gpsdict['speed'] = gpsloc.speed
retVal['gps'] = gpsdict
retVal['networks'] = netList
retVal['clients'] = clientList
jsonstr = json.dumps(retVal)
return errCode, errmsg, jsonstr
def __init__(self):
self.macAddr = ""
self.apMacAddr = ""
self.ssid = ""
self.channel = 0
self.signal = -1000 # dBm
now=datetime.datetime.now()
self.firstSeen = now
self.lastSeen = now
self.gps = SparrowGPS()
self.strongestsignal = self.signal
self.strongestgps = SparrowGPS()
self.probedSSIDs = []
# Used for tracking in network table
self.foundInList = False
def __init__(self):
self.uuid=""
self.macAddress = ""
self.name=""
self.company=""
self.manufacturer=""
self.bluetoothDescription = ""
self.btType = BluetoothDevice.BT_LE # Classic or low energy
self.rssi=-100
self.txPower = -60
self.txPowerValid = False
self.iBeaconRange = -1.0
self.firstSeen = datetime.datetime.now()
self.lastSeen = datetime.datetime.now()
self.gps = SparrowGPS()
self.strongestRssi = self.rssi
self.strongestgps = SparrowGPS()
self.foundInList = False
class BluetoothDevice(object):
BT_CLASSIC = 1
BT_LE = 2
def __init__(self):
self.uuid=""
self.macAddress = ""
self.name=""
self.company=""
self.manufacturer=""
self.bluetoothDescription = ""
self.btType = BluetoothDevice.BT_LE # Classic or low energy
self.rssi=-100
self.txPower = -60
self.txPowerValid = False
self.iBeaconRange = -1.0
self.firstSeen = datetime.datetime.now()
self.lastSeen = datetime.datetime.now()
self.gps = SparrowGPS()
self.strongestRssi = self.rssi
self.strongestgps = SparrowGPS()
self.foundInList = False
def __str__(self):
retVal = ""
retVal += "UUID: " + self.uuid + '\n'
retVal += "Address: " + self.macAddress + '\n'
retVal += "Company: " + self.company + '\n'
retVal += "Manufacturer: " + self.manufacturer + '\n'
if self.btType == BluetoothDevice.BT_CLASSIC:
retVal += 'btType: Bluetooth Classic\n'
else:
retVal += 'btType: Bluetooth Low Energy (BTLE)\n'
retVal += "Bluetooth Description: " + self.bluetoothDescription + '\n'
retVal += "RSSI: " + str(self.rssi) + '\n'
retVal += "TX Power: " + str(self.txPower) + '\n'
retVal += "TX Power Valid: " + str(self.txPowerValid) + '\n'
retVal += "Estimated Range (m): " + str(self.iBeaconRange) + '\n'
retVal += "Strongest RSSI: " + str(self.strongestRssi) + '\n'
retVal += "Last GPS:\n"
retVal += str(self.gps)
retVal += "Strongest GPS:\n"
retVal += str(self.strongestgps)
return retVal
def __eq__(self, obj):
# This is equivance.... ==
if not isinstance(obj, BluetoothDevice):
return False
if self.uuid != obj.uuid:
return False
if self.macAddress != obj.macAddress:
return False
if self.btType != obj.btType:
return False
return True
def __ne__(self, other):
return not self.__eq__(other)
def copy(self, other):
self.uuid=other.uuid
self.macAddress = other.macAddress
self.name=other.name
self.company=other.company
self.manufacturer=other.manufacturer
self.bluetoothDescription = other.bluetoothDescription
self.btType = other.btType
self.rssi=other.rssi
self.txPower = other.txPower
self.txPowerValid = other.txPowerValid
self.iBeaconRange = other.iBeaconRange
self.firstSeen = other.firstSeen
self.lastSeen = other.lastSeen
self.gps.copy(other.gps)
self.strongestRssi = other.strongestRssi
self.strongestgps.copy(other.strongestgps)
self.foundInList = False
def getKey(self):
key = self.macAddress # + "_" + str(self.btType)
return key
def calcRange(self):
if not self.txPowerValid or self.txPower == 0:
self.iBeaconRange = -1
return
# This is what iOS does:
# https://stackoverflow.com/questions/20416218/understanding-ibeacon-distancing
# Also note: "accuracy" is iOS's terminology for distance
#ratio = self.rssi / self.txPower
#if ratio < 1.0:
# self.iBeaconRange = ratio ** 10
#else:
# self.iBeaconRange = 0.89976* (ratio ** 7.7095) + 0.111
#self.iBeaconRange = round(self.iBeaconRange, 2)
try:
ratio_db = float(self.txPower - self.rssi)
# txPower is supposed to be the RSSI measured at 1m.
# In reality that's not quite what I've observed.
# txPower may be a default/guess so watch the math.
# Generally rssi < txPower making ratio_db >= 0
if ratio_db < 0.0:
self.iBeaconRange = 0.0
return
elif ratio_db <= 1.5:
self.iBeaconRange = 0.5
return
elif ratio_db <= 3.0:
self.iBeaconRange = 1.0
return
#n = 3 # free space n = 2, real-world range is 2.7 - 4.3
# If we don't have an rssi, this could calc wrong
#dist = 10 ** (ratio_db / (10*n))
dist = 10.0 ** (ratio_db / 10.0)
# Safety check on sqrt
if dist < 0.0:
dist = 0.0
dist = math.sqrt(dist)
self.iBeaconRange = round(dist, 2)
except:
self.iBeaconRange = -1
# Old:
#try:
# txPower = int(strTxPower)
# ratio_db = float(txPower - rssi)
# If we don't have an rssi, this could calc wrong
# ratio_linear = 10.0 ** ( ratio_db / 10.0 )
# if ratio_linear >= 0.0:
# dist = round(math.sqrt(ratio_linear), 2)
# else:
# dist = -1.0
#except:
# dist = -1.0
#try:
# txPower = int(strTxPower)
# gain = 5 # FSPL unknown gain factor
# path_loss = math.fabs(float(txPower - rssi)) + gain
# If we don't have an rssi, this could calc wrong
# Calc is based on free space path loss at 2.4ish MHz (freq matters)
# http://www.electronicdesign.com/communications/understanding-wireless-range-calculations
# dist = 10.0 ** ( (path_loss - 32.44 - 67.78) / 20.0 ) * 1000.0
# dist = round(dist, 2)
#except:
# dist = -1
def fromJson(self, jsonstr):
dictjson = json.loads(jsonstr)
self.fromJsondict(dictjson)
def toJson(self):
dictjson = self.toJsondict()
return json.dumps(dictjson)
def fromJsondict(self, dictjson):
# Note: if the json dictionary isn't correct, this will naturally throw an exception that may
# need to be caught for error detection
self.uuid = dictjson['uuid']
self.macAddress = dictjson['macAddr']
self.name = dictjson['name']
self.company = dictjson['company']
self.manufacturer = dictjson['manufacturer']
self.bluetoothDescription = dictjson['bluetoothdescription']
self.btType = int(dictjson['bttype'])
self.rssi = int(dictjson['rssi'])
self.txPower = int(dictjson['txpower'])
self.txPowerValid = stringtobool(dictjson['txpowervalid'])
self.strongestRssi = int(dictjson['strongestrssi'])
self.iBeaconRange = float(dictjson['ibeaconrange'])
self.firstSeen = parser.parse(dictjson['firstseen'])
self.lastSeen = parser.parse(dictjson['lastseen'])
self.gps.latitude = float(dictjson['lat'])
self.gps.longitude = float(dictjson['lon'])
self.gps.altitude = float(dictjson['alt'])
self.gps.speed = float(dictjson['speed'])
self.gps.isValid = stringtobool(dictjson['gpsvalid'])
self.strongestgps.latitude = float(dictjson['strongestlat'])
self.strongestgps.longitude = float(dictjson['strongestlon'])
self.strongestgps.altitude = float(dictjson['strongestalt'])
self.strongestgps.speed = float(dictjson['strongestspeed'])
self.strongestgps.isValid = stringtobool(dictjson['strongestgpsvalid'])
def toJsondict(self):
dictjson = {}
dictjson['type'] = 'bluetooth'
dictjson['uuid'] = self.uuid
dictjson['macAddr'] = self.macAddress
dictjson['name'] = self.name
dictjson['company'] = self.company
dictjson['manufacturer'] = self.manufacturer
dictjson['bluetoothdescription'] = self.bluetoothDescription
dictjson['bttype'] = self.btType
dictjson['rssi'] = self.rssi
dictjson['txpower'] = self.txPower
dictjson['txpowervalid'] = str(self.txPowerValid)
dictjson['strongestrssi'] = self.strongestRssi
dictjson['ibeaconrange'] = self.iBeaconRange
dictjson['firstseen'] = str(self.firstSeen)
dictjson['lastseen'] = str(self.lastSeen)
dictjson['lat'] = str(self.gps.latitude)
dictjson['lon'] = str(self.gps.longitude)
dictjson['alt'] = str(self.gps.altitude)
dictjson['speed'] = str(self.gps.speed)
dictjson['gpsvalid'] = str(self.gps.isValid)
dictjson['strongestlat'] = str(self.strongestgps.latitude)
dictjson['strongestlon'] = str(self.strongestgps.longitude)
dictjson['strongestalt'] = str(self.strongestgps.altitude)
dictjson['strongestspeed'] = str(self.strongestgps.speed)
dictjson['strongestgpsvalid'] = str(self.strongestgps.isValid)
return dictjson