def test_cabinetise():
c = coordinates.Cartesian2D
s = coordinates.Cabinet
o0 = "o0"
o1 = "o1"
o2 = "o2"
o3 = "o3"
assert transforms.cabinetise([], num_cabinets=0,
frames_per_cabinet=0) == []
assert transforms.cabinetise(
[(o0, c(0,0)), (o1, c(1,0)), (o2, c(0,1)), (o3, c(1,1))],
num_cabinets=2, frames_per_cabinet=2, boards_per_frame=1) == \
[(o0, s(0,0,0)), (o1, s(1,0,0)), (o2, s(0,1,0)), (o3, s(1,1,0))]
def cabinetised_boards(cabinet): from spinner import transforms from spinner import utils # Generate folded system hex_boards, folded_boards = utils.folded_torus(10, 8, "shear", "rows", (2, 2)) # Divide into cabinets cabinetised_boards = transforms.cabinetise(folded_boards, cabinet.num_cabinets, cabinet.frames_per_cabinet, cabinet.boards_per_frame) cabinetised_boards = transforms.remove_gaps(cabinetised_boards) return cabinetised_boards
def cabinetised_boards(cabinet):
from spinner import transforms
from spinner import utils
# Generate folded system
hex_boards, folded_boards = utils.folded_torus(10, 8, "shear", "rows",
(2, 2))
# Divide into cabinets
cabinetised_boards = transforms.cabinetise(folded_boards,
cabinet.num_cabinets,
cabinet.frames_per_cabinet,
cabinet.boards_per_frame)
cabinetised_boards = transforms.remove_gaps(cabinetised_boards)
return cabinetised_boards
def test_assign_wires():
# Simply check the appropriateness of each point provided in an example system.
hex_boards, folded_boards = utils.folded_torus(4, 2, "shear", "rows",
(2, 2))
cabinetised_boards = transforms.cabinetise(folded_boards, 1, 1, 24)
wires = plan.enumerate_wires(cabinetised_boards)
# Map each board to a point along a line.
physical_boards = [(board, coordinates.Cartesian3D(float(b), 0.0, 0.0))
for board, (c, f, b) in cabinetised_boards]
b2c = dict(physical_boards)
# Given in no particular order
available_wire_lengths = [8.0, 3.0, 24.0]
board_wire_offset = {
Direction.north: coordinates.Cartesian3D(0.0, 0.0, 0.0),
Direction.south: coordinates.Cartesian3D(1.0, 0.0, 0.0),
Direction.east: coordinates.Cartesian3D(0.0, 1.0, 0.0),
Direction.west: coordinates.Cartesian3D(0.0, 0.0, 1.0),
Direction.north_east: coordinates.Cartesian3D(1.0, 1.0, 1.0),
Direction.south_west: coordinates.Cartesian3D(-1.0, -1.0, -1.0),
}
last_wire = None
last_arc_height = None
for src, dst, wire in plan.assign_wires(wires, physical_boards,
board_wire_offset,
available_wire_lengths, 0.0):
# Check the wire was chosen correctly
distance = ((b2c[src[0]] + board_wire_offset[src[1]]) -
(b2c[dst[0]] + board_wire_offset[dst[1]])).magnitude()
shortest_possible_wire, arc_height = metrics.physical_wire_length(
distance, available_wire_lengths, 0.0)
assert wire == shortest_possible_wire
# Make sure wires are given in ascending order of arc height unless the
# wire length changes
if last_wire == wire and last_arc_height is not None:
assert arc_height >= last_arc_height
last_arc_height = arc_height
last_wire = wire
def test_assign_wires():
# Simply check the appropriateness of each point provided in an example system.
hex_boards, folded_boards = utils.folded_torus(4, 2, "shear", "rows", (2,2))
cabinetised_boards = transforms.cabinetise(folded_boards, 1, 1, 24)
wires = plan.enumerate_wires(cabinetised_boards)
# Map each board to a point along a line.
physical_boards = [(board, coordinates.Cartesian3D(float(b), 0.0, 0.0))
for board, (c, f, b) in cabinetised_boards]
b2c = dict(physical_boards)
# Given in no particular order
available_wire_lengths = [8.0, 3.0, 24.0]
board_wire_offset = {
Direction.north: coordinates.Cartesian3D(0.0, 0.0, 0.0),
Direction.south: coordinates.Cartesian3D(1.0, 0.0, 0.0),
Direction.east: coordinates.Cartesian3D(0.0, 1.0, 0.0),
Direction.west: coordinates.Cartesian3D(0.0, 0.0, 1.0),
Direction.north_east: coordinates.Cartesian3D(1.0, 1.0, 1.0),
Direction.south_west: coordinates.Cartesian3D(-1.0, -1.0, -1.0),
}
last_wire = None
last_arc_height = None
for src, dst, wire in plan.assign_wires(wires, physical_boards,
board_wire_offset,
available_wire_lengths, 0.0):
# Check the wire was chosen correctly
distance = ((b2c[src[0]] + board_wire_offset[src[1]]) -
(b2c[dst[0]] + board_wire_offset[dst[1]])).magnitude()
shortest_possible_wire, arc_height = metrics.physical_wire_length(
distance, available_wire_lengths, 0.0)
assert wire == shortest_possible_wire
# Make sure wires are given in ascending order of arc height unless the
# wire length changes
if last_wire == wire and last_arc_height is not None:
assert arc_height >= last_arc_height
last_arc_height = arc_height
last_wire = wire
def main(args=None):
parser = argparse.ArgumentParser(
description="Generate visual maps from the SpiNNaker network topology to "
"board locations.")
arguments.add_version_args(parser)
arguments.add_image_args(parser)
arguments.add_topology_args(parser)
arguments.add_cabinet_args(parser)
# Process command-line arguments
args = parser.parse_args(args)
(w, h), transformation, uncrinkle_direction, folds =\
arguments.get_topology_from_args(parser, args)
cabinet, num_frames = arguments.get_cabinets_from_args(parser, args)
aspect_ratio = get_machine_map_aspect_ratio(w, h)
output_filename, file_type, image_width, image_height =\
arguments.get_image_from_args(parser, args, aspect_ratio)
# Generate folded system
hex_boards, folded_boards = folded_torus(w, h,
transformation,
uncrinkle_direction,
folds)
# Divide into cabinets
cabinetised_boards = transforms.cabinetise(folded_boards,
cabinet.num_cabinets,
num_frames,
cabinet.boards_per_frame)
cabinetised_boards = transforms.remove_gaps(cabinetised_boards)
# Render the image
Context = {"png": PNGContextManager, "pdf": PDFContextManager}[file_type]
with Context(output_filename, image_width, image_height) as ctx:
draw_machine_map(ctx, image_width, image_height,
w, h, hex_boards, cabinetised_boards)
return 0
def main(args=None):
parser = argparse.ArgumentParser(
description="Produce CSV listings of Ethernet connected chip physical and "
"network positions.")
arguments.add_version_args(parser)
arguments.add_topology_args(parser)
arguments.add_cabinet_args(parser)
# Process command-line arguments
args = parser.parse_args(args)
(w, h), transformation, uncrinkle_direction, folds =\
arguments.get_topology_from_args(parser, args)
cabinet, num_frames = arguments.get_cabinets_from_args(parser, args)
# Generate folded system
hex_boards, folded_boards = folded_torus(w, h,
transformation,
uncrinkle_direction,
folds)
# Divide into cabinets
cabinetised_boards = transforms.cabinetise(folded_boards,
cabinet.num_cabinets,
num_frames,
cabinet.boards_per_frame)
cabinetised_boards = transforms.remove_gaps(cabinetised_boards)
# Generate the output
print("cabinet,frame,board,x,y")
b2c = dict(cabinetised_boards)
for board, hex_coord in sorted(hex_boards, key=(lambda v: topology.to_xy(v[1]))):
x, y = topology.to_xy(topology.board_to_chip(hex_coord))
c, f, b = b2c[board]
print(",".join(map(str, [c,f,b, x,y])))
return 0
def main(args=None):
parser = argparse.ArgumentParser(
description=
"Produce CSV listings of Ethernet connected chip physical and "
"network positions.")
arguments.add_version_args(parser)
arguments.add_topology_args(parser)
arguments.add_cabinet_args(parser)
# Process command-line arguments
args = parser.parse_args(args)
(w, h), transformation, uncrinkle_direction, folds =\
arguments.get_topology_from_args(parser, args)
cabinet, num_frames = arguments.get_cabinets_from_args(parser, args)
# Generate folded system
hex_boards, folded_boards = folded_torus(w, h, transformation,
uncrinkle_direction, folds)
# Divide into cabinets
cabinetised_boards = transforms.cabinetise(folded_boards,
cabinet.num_cabinets,
num_frames,
cabinet.boards_per_frame)
cabinetised_boards = transforms.remove_gaps(cabinetised_boards)
# Generate the output
print("cabinet,frame,board,x,y")
b2c = dict(cabinetised_boards)
for board, hex_coord in sorted(hex_boards,
key=(lambda v: topology.to_xy(v[1]))):
x, y = topology.to_xy(topology.board_to_chip(hex_coord))
c, f, b = b2c[board]
print(",".join(map(str, [c, f, b, x, y])))
return 0
def main(args=None):
parser = argparse.ArgumentParser(
description="Generate illustrations of SpiNNaker machine wiring.")
arguments.add_version_args(parser)
arguments.add_image_args(parser)
add_diagram_arguments(parser)
arguments.add_topology_args(parser)
arguments.add_cabinet_args(parser)
arguments.add_subset_args(parser)
# Process command-line arguments
args = parser.parse_args(args)
(w, h), transformation, uncrinkle_direction, folds =\
arguments.get_topology_from_args(parser, args)
cabinet, num_frames =\
arguments.get_cabinets_from_args(parser, args)
aspect_ratio, focus, wire_thickness, highlights, hide_labels =\
get_diagram_arguments(parser, args, w, h, cabinet, num_frames)
output_filename, file_type, image_width, image_height =\
arguments.get_image_from_args(parser, args, aspect_ratio)
wire_filter = arguments.get_subset_from_args(parser, args)
# Generate folded system
hex_boards, folded_boards = folded_torus(w, h,
transformation,
uncrinkle_direction,
folds)
# Divide into cabinets
cabinetised_boards = transforms.cabinetise(folded_boards,
cabinet.num_cabinets,
num_frames,
cabinet.boards_per_frame)
cabinetised_boards = transforms.remove_gaps(cabinetised_boards)
# Set up diagram
md = MachineDiagram(cabinet)
# Create lookup from cabinet coord to chip x/y to enable labelling of boards
b2cab = dict(cabinetised_boards)
b2chip = dict((b, topology.to_xy(topology.board_to_chip(c)))
for b, c in hex_boards)
cab2chip = dict((b2cab[b], b2chip[b]) for b, c in cabinetised_boards)
# Add labels
if not hide_labels:
for cabinet_num in range(cabinet.num_cabinets):
md.add_label(cabinet_num, cabinet_num)
for frame_num in range(cabinet.frames_per_cabinet):
md.add_label(frame_num, cabinet_num, frame_num)
for board_num in range(cabinet.boards_per_frame):
# Only label boards which are actually part of the system
xy = cab2chip.get((cabinet_num, frame_num, board_num), None)
if xy is not None:
md.add_label("{} ({},{})".format(board_num, xy.x, xy.y),
cabinet_num, frame_num, board_num)
for socket in Direction:
name = "".join(w[0] for w in socket.name.split("_")).upper()
md.add_label(name, cabinet_num, frame_num, board_num, socket,
rgba=(1.0, 1.0, 1.0, 0.7))
# Add highlights
for highlight in highlights:
md.add_highlight(*highlight, width=cabinet.board_dimensions.x/3.0)
# Add wires
wire_thickness_m = {
"thick" : cabinet.board_dimensions.x / 5.0,
"normal" : cabinet.board_dimensions.x / 10.0,
"thin" : cabinet.board_dimensions.x / 20.0,
}[wire_thickness]
b2c = dict(cabinetised_boards)
for direction in [Direction.north, Direction.west, Direction.north_east]:
for b, c in cabinetised_boards:
ob = b.follow_wire(direction)
oc = b2c[ob]
src = (c.cabinet, c.frame, c.board, direction)
dst = (oc.cabinet, oc.frame, oc.board, direction.opposite)
if wire_filter((src, dst)):
md.add_wire(src, dst, width=wire_thickness_m)
# Render the image
Context = {"png": PNGContextManager,
"pdf": PDFContextManager}[file_type]
with Context(output_filename, image_width, image_height) as ctx:
md.draw(ctx, image_width, image_height, *(((list(focus) + [None]*3)[:3])*2))
return 0
def main(args=None):
parser = argparse.ArgumentParser(
description="Print basic wiring statistics for a specified "
" configuration of boards.")
arguments.add_version_args(parser)
arguments.add_topology_args(parser)
arguments.add_histogram_args(parser)
arguments.add_wire_length_args(parser)
arguments.add_cabinet_args(parser)
# Process and display command-line arguments
args = parser.parse_args(args)
(w, h), transformation, uncrinkle_direction, folds =\
arguments.get_topology_from_args(parser, args)
histogram_bins = arguments.get_histogram_from_args(parser, args)
wire_lengths, min_slack =\
arguments.get_wire_lengths_from_args(parser, args)
cabinet, num_frames = arguments.get_cabinets_from_args(parser, args)
print(heading("Wiring Statistics", 1))
print(heading("Folding Parameters", 2))
print(table([["Parameter", "Value", "Unit"],
["Number of boards", 3 * w * h, ""],
["System dimensions", "{}x{}".format(w, h), "triads"],
["Transformation", transformation, ""],
["Uncrinkle Direction", uncrinkle_direction, ""],
["Folds", "{}x{}".format(*folds), "pieces"],
["Number of cabinets", cabinet.num_cabinets, ""],
["Number of frames-per-cabinet", num_frames, ""],
["Number of boards-per-frame", cabinet.boards_per_frame, ""],
]))
# Generate folded system and report wire-lengths after folding
hex_boards, folded_boards = folded_torus(w, h,
transformation,
uncrinkle_direction,
folds)
print(heading("Non-cabinetised measurements", 2))
print(avg_wire_length_table(folded_boards, "boards"))
# Divide into cabinets and report crossings
cabinetised_boards = transforms.cabinetise(folded_boards,
cabinet.num_cabinets,
num_frames,
cabinet.boards_per_frame)
cabinetised_boards = transforms.remove_gaps(cabinetised_boards)
print(heading("Inter-cabinet/Inter-frame wiring", 2))
print(wire_counts_table(cabinetised_boards))
# Map to real, physical cabinets and measure wire lengths
physical_boards = transforms.cabinet_to_physical(cabinetised_boards, cabinet)
print(heading("Cabinetised measurements", 2))
print("All wire lengths described in this section do not include any slack.\n")
print(avg_wire_length_table(physical_boards, "meters",
cabinet.board_wire_offset))
# Generate a histogram of wire lengths
print(heading("Wire length histogram", 2))
print("Wire lengths are selected which include at least {} meters "
"of slack.\n".format(min_slack))
print(wire_length_table(physical_boards,
wire_lengths if wire_lengths else histogram_bins,
min_slack,
cabinet.board_wire_offset))
return 0
def main(args=None):
parser = argparse.ArgumentParser(
description=
"Textually enumerate every connection required in a machine.")
parser.add_argument("--sort-by",
"-s",
choices=["installation-order", "board", "wire-length"],
default="board",
help="Specifies the order the connections should be "
"listed in the file: installation-order sorts in "
"the most sensible order for installation, "
"board lists wires on a board-by-board basis, "
"wire-length lists in order of wire length.")
arguments.add_version_args(parser)
arguments.add_topology_args(parser)
arguments.add_cabinet_args(parser)
arguments.add_wire_length_args(parser)
# Process command-line arguments
args = parser.parse_args(args)
(w, h), transformation, uncrinkle_direction, folds =\
arguments.get_topology_from_args(parser, args)
cabinet, num_frames = arguments.get_cabinets_from_args(parser, args)
wire_lengths, min_slack = arguments.get_wire_lengths_from_args(
parser, args, mandatory=True)
# Generate folded system
hex_boards, folded_boards = folded_torus(w, h, transformation,
uncrinkle_direction, folds)
# Divide into cabinets
cabinetised_boards = transforms.cabinetise(folded_boards,
cabinet.num_cabinets,
num_frames,
cabinet.boards_per_frame)
cabinetised_boards = transforms.remove_gaps(cabinetised_boards)
physical_boards = transforms.cabinet_to_physical(cabinetised_boards,
cabinet)
# Generate wiring plan
wires_between_boards, wires_between_frames, wires_between_cabinets =\
generate_wiring_plan(cabinetised_boards, physical_boards,
cabinet.board_wire_offset, wire_lengths, min_slack)
flat_wiring_plan = flatten_wiring_plan(wires_between_boards,
wires_between_frames,
wires_between_cabinets,
cabinet.board_wire_offset)
# Convert wiring plan into cabinet coordinates
b2c = dict(cabinetised_boards)
wires = []
for ((src_board, src_direction), (dst_board, dst_direction), wire_length) \
in flat_wiring_plan:
sc, sf, sb = b2c[src_board]
dc, df, db = b2c[dst_board]
wires.append(((sc, sf, sb, src_direction), (dc, df, db, dst_direction),
wire_length, src_board, dst_board))
b2p = dict(physical_boards)
# Order as requested on the command-line
if args.sort_by == "board":
wires = sorted(wires)
elif args.sort_by == "wire-length":
wires = sorted(wires, key=(lambda w: (w[2], w[:2])))
elif args.sort_by == "installation-order": # pragma: no branch
pass # List is initially in assembly order
print("C F B Socket C F B Socket Length")
print("-- -- -- ---------- -- -- -- ---------- ------")
for ((sc, sf, sb, src_direction), (dc, df, db, dst_direction), wire_length,
src_board, dst_board) in wires:
print("{:2d} {:2d} {:2d} {:10s} {:2d} {:2d} {:2d} {:10s} {:0.2f}".
format(sc, sf, sb, src_direction.name.replace("_", " "), dc, df,
db, dst_direction.name.replace("_", " "), wire_length))
return 0
def main(args=None):
parser = argparse.ArgumentParser(
description=
"Interactively guide the user through the process of wiring up a "
"SpiNNaker machine.")
arguments.add_version_args(parser)
parser.add_argument("--no-tts",
action="store_true",
default=False,
help="disable text-to-speech announcements of wiring "
"steps")
parser.add_argument("--no-auto-advance",
action="store_true",
default=False,
help="disable auto-advancing through wiring steps")
parser.add_argument("--fix",
action="store_true",
default=False,
help="detect errors in existing wiring and just show "
"corrective steps")
parser.add_argument(
"--log",
type=str,
metavar="LOGFILE",
help="record the times at which each cable is installed")
arguments.add_topology_args(parser)
arguments.add_cabinet_args(parser)
arguments.add_wire_length_args(parser)
arguments.add_bmp_args(parser)
arguments.add_proxy_args(parser)
arguments.add_subset_args(parser)
# Process command-line arguments
args = parser.parse_args(args)
(w, h), transformation, uncrinkle_direction, folds =\
arguments.get_topology_from_args(parser, args)
cabinet, num_frames = arguments.get_cabinets_from_args(parser, args)
wire_lengths, min_slack = arguments.get_wire_lengths_from_args(
parser, args, mandatory=True)
bmp_ips = arguments.get_bmps_from_args(parser, args, cabinet.num_cabinets,
num_frames)
proxy_host_port = arguments.get_proxy_from_args(parser, args)
wire_filter = arguments.get_subset_from_args(parser, args)
if cabinet.num_cabinets == num_frames == 1:
num_boards = 3 * w * h
else:
num_boards = cabinet.boards_per_frame
# Generate folded system
hex_boards, folded_boards = folded_torus(w, h, transformation,
uncrinkle_direction, folds)
# Divide into cabinets
cabinetised_boards = transforms.cabinetise(folded_boards,
cabinet.num_cabinets,
num_frames,
cabinet.boards_per_frame)
cabinetised_boards = transforms.remove_gaps(cabinetised_boards)
physical_boards = transforms.cabinet_to_physical(cabinetised_boards,
cabinet)
# Focus on only the boards which are part of the system
if cabinet.num_cabinets > 1:
focus = [slice(0, cabinet.num_cabinets)]
elif num_frames > 1:
focus = [0, slice(0, num_frames)]
else:
focus = [0, 0, slice(0, w * h * 3)]
# Generate wiring plan
wires_between_boards, wires_between_frames, wires_between_cabinets =\
generate_wiring_plan(cabinetised_boards, physical_boards,
cabinet.board_wire_offset, wire_lengths, min_slack)
flat_wiring_plan = flatten_wiring_plan(wires_between_boards,
wires_between_frames,
wires_between_cabinets,
cabinet.board_wire_offset)
# Create a BMP connection/wiring probe or connect to a proxy
if proxy_host_port is None:
if len(bmp_ips) == 0:
if args.fix:
parser.error(
"--fix requires that all BMPs be listed with --bmp")
bmp_controller = None
wiring_probe = None
else:
bmp_controller = BMPController(bmp_ips)
# Create a wiring probe
if bmp_controller is not None and (not args.no_auto_advance
or args.fix):
wiring_probe = WiringProbe(bmp_controller, cabinet.num_cabinets,
num_frames, num_boards)
else:
# Fix is not supported since the proxy client does not recreate the
# discover_wires method of WiringProbe.
if args.fix:
parser.error("--fix cannot be used with --proxy")
# The proxy object provides a get_link_target and set_led method compatible
# with those provided by bmp_controller and wiring_probe. Since these are
# the only methods used, we use the proxy client object in place of
# bmp_controller and wiring_probe.
bmp_controller = wiring_probe = ProxyClient(*proxy_host_port)
# Create a TimingLogger if required
if args.log:
if os.path.isfile(args.log):
logfile = open(args.log, "a")
add_header = False
else:
logfile = open(args.log, "w")
add_header = True
timing_logger = TimingLogger(logfile, add_header)
else:
logfile = None
timing_logger = None
# Convert wiring plan into cabinet coordinates
b2c = dict(cabinetised_boards)
wires = []
for ((src_board, src_direction), (dst_board, dst_direction), wire_length) \
in flat_wiring_plan:
sc, sf, sb = b2c[src_board]
dc, df, db = b2c[dst_board]
wires.append(((sc, sf, sb, src_direction), (dc, df, db, dst_direction),
wire_length))
# Filter wires according to user-specified rules
wires = list(filter(wire_filter, wires))
if len(wires) == 0:
parser.error("--subset selects no wires")
if not args.fix:
# If running normally, just run through the full set of wires
wiring_plan = wires
else:
# If running in fix mode, generate a list of fixes to make
correct_wires = set((src, dst) for src, dst, length in wires)
actual_wires = set(wiring_probe.discover_wires())
to_remove = actual_wires - correct_wires
to_add = correct_wires - actual_wires
# Remove all bad wires first, then re-add good ones (note ordering now is
# just reset to cabinets right-to-left, frames top-to-bottom and boards
# left-to-right).
wiring_plan = [(src, dst, None) for src, dst in sorted(to_remove)]
for src, dst, length in wires:
if (src, dst) in to_add:
wiring_plan.append((src, dst, length))
if len(wiring_plan) == 0:
print("No corrections required.")
return 0
# Intialise the GUI and launch the mainloop
ui = InteractiveWiringGuide(cabinet=cabinet,
wire_lengths=wire_lengths,
wires=wiring_plan,
bmp_controller=bmp_controller,
use_tts=not args.no_tts,
focus=focus,
wiring_probe=wiring_probe,
auto_advance=not args.no_auto_advance,
timing_logger=timing_logger)
ui.mainloop()
if logfile is not None:
logfile.close()
return 0
def test_generate_wiring_plan():
# Since generate_wiring_plan is largely a wrapper around the functions tested
# above, this simply tests that the output is not insane...
hex_boards, folded_boards = utils.folded_torus(10, 8, "shear", "rows",
(2, 2))
cabinetised_boards = transforms.cabinetise(folded_boards, 2, 5, 24)
cab = cabinet.Cabinet(**real)
physical_boards = transforms.cabinet_to_physical(cabinetised_boards, cab)
all_wires = plan.enumerate_wires(cabinetised_boards)
available_wire_lengths = [0.3, 0.5, 1.0]
b2c = dict(cabinetised_boards)
between_boards, between_frames, between_cabinets =\
plan.generate_wiring_plan(cabinetised_boards, physical_boards,
cab.board_wire_offset,
available_wire_lengths,
0.0)
seen_wires = set()
assert set(between_boards) == set(
(c, f, d) for c in range(cab.num_cabinets)
for f in range(cab.frames_per_cabinet)
for d in [Direction.north, Direction.south_west, Direction.east])
for (cabinet_num, frame_num,
direction), wires in iteritems(between_boards):
for ((src_board, src_direction), (dst_board, dst_direction),
wire_length) in wires:
# The board does stay in the frame_num and goes in the specified direction
c, f, b = b2c[src_board]
assert c == cabinet_num
assert f == frame_num
assert src_direction == direction
c, f, b = b2c[dst_board]
assert c == cabinet_num
assert f == frame_num
assert dst_direction == direction.opposite
# The wire length chosen should exist
assert wire_length in available_wire_lengths
# Check we've not seen it before
wire = ((src_board, src_direction), (dst_board, dst_direction))
assert wire not in seen_wires
seen_wires.add(wire)
assert set(between_frames) == set(
(c, d) for c in range(cab.num_cabinets)
for d in [Direction.north, Direction.south_west, Direction.east])
for (cabinet_num, direction), wires in iteritems(between_frames):
for ((src_board, src_direction), (dst_board, dst_direction),
wire_length) in wires:
# The board does stay in the cabinet and goes in the specified direction
c, f, b = b2c[src_board]
assert c == cabinet_num
assert src_direction == direction
c, f, b = b2c[dst_board]
assert c == cabinet_num
assert dst_direction == direction.opposite
assert wire_length in available_wire_lengths
# Check we've not seen it before
wire = ((src_board, src_direction), (dst_board, dst_direction))
assert wire not in seen_wires
seen_wires.add(wire)
assert set(between_cabinets) == set(
[Direction.north, Direction.south_west, Direction.east])
for direction, wires in iteritems(between_cabinets):
for ((src_board, src_direction), (dst_board, dst_direction),
wire_length) in wires:
# The board does stay in the cabinet and goes in the specified direction
assert src_direction == direction
assert dst_direction == direction.opposite
assert wire_length in available_wire_lengths
# Check we've not seen it before
wire = ((src_board, src_direction), (dst_board, dst_direction))
assert wire not in seen_wires
seen_wires.add(wire)
# All wires should have been seen
assert seen_wires == set(all_wires)
def main(args=None):
parser = argparse.ArgumentParser(
description="Interactively guide the user through the process of wiring up a "
"SpiNNaker machine.")
arguments.add_version_args(parser)
parser.add_argument("--no-tts", action="store_true", default=False,
help="disable text-to-speech announcements of wiring "
"steps")
parser.add_argument("--no-auto-advance", action="store_true", default=False,
help="disable auto-advancing through wiring steps")
parser.add_argument("--fix", action="store_true", default=False,
help="detect errors in existing wiring and just show "
"corrective steps")
parser.add_argument("--log", type=str, metavar="LOGFILE",
help="record the times at which each cable is installed")
arguments.add_topology_args(parser)
arguments.add_cabinet_args(parser)
arguments.add_wire_length_args(parser)
arguments.add_bmp_args(parser)
arguments.add_proxy_args(parser)
arguments.add_subset_args(parser)
# Process command-line arguments
args = parser.parse_args(args)
(w, h), transformation, uncrinkle_direction, folds =\
arguments.get_topology_from_args(parser, args)
cabinet, num_frames = arguments.get_cabinets_from_args(parser, args)
wire_lengths, min_slack = arguments.get_wire_lengths_from_args(
parser, args, mandatory=True)
bmp_ips = arguments.get_bmps_from_args(parser, args,
cabinet.num_cabinets,
num_frames)
proxy_host_port = arguments.get_proxy_from_args(parser, args)
wire_filter = arguments.get_subset_from_args(parser, args)
if cabinet.num_cabinets == num_frames == 1:
num_boards = 3 * w * h
else:
num_boards = cabinet.boards_per_frame
# Generate folded system
hex_boards, folded_boards = folded_torus(w, h,
transformation,
uncrinkle_direction,
folds)
# Divide into cabinets
cabinetised_boards = transforms.cabinetise(folded_boards,
cabinet.num_cabinets,
num_frames,
cabinet.boards_per_frame)
cabinetised_boards = transforms.remove_gaps(cabinetised_boards)
physical_boards = transforms.cabinet_to_physical(cabinetised_boards, cabinet)
# Focus on only the boards which are part of the system
if cabinet.num_cabinets > 1:
focus = [slice(0, cabinet.num_cabinets)]
elif num_frames > 1:
focus = [0, slice(0, num_frames)]
else:
focus = [0, 0, slice(0, w*h*3)]
# Generate wiring plan
wires_between_boards, wires_between_frames, wires_between_cabinets =\
generate_wiring_plan(cabinetised_boards, physical_boards,
cabinet.board_wire_offset, wire_lengths, min_slack)
flat_wiring_plan = flatten_wiring_plan(wires_between_boards,
wires_between_frames,
wires_between_cabinets,
cabinet.board_wire_offset)
# Create a BMP connection/wiring probe or connect to a proxy
if proxy_host_port is None:
if len(bmp_ips) == 0:
if args.fix:
parser.error("--fix requires that all BMPs be listed with --bmp")
bmp_controller = None
wiring_probe = None
else:
bmp_controller = BMPController(bmp_ips)
# Create a wiring probe
if bmp_controller is not None and (not args.no_auto_advance or args.fix):
wiring_probe = WiringProbe(bmp_controller,
cabinet.num_cabinets,
num_frames,
num_boards)
else:
# Fix is not supported since the proxy client does not recreate the
# discover_wires method of WiringProbe.
if args.fix:
parser.error("--fix cannot be used with --proxy")
# The proxy object provides a get_link_target and set_led method compatible
# with those provided by bmp_controller and wiring_probe. Since these are
# the only methods used, we use the proxy client object in place of
# bmp_controller and wiring_probe.
bmp_controller = wiring_probe = ProxyClient(*proxy_host_port)
# Create a TimingLogger if required
if args.log:
if os.path.isfile(args.log):
logfile = open(args.log, "a")
add_header = False
else:
logfile = open(args.log, "w")
add_header = True
timing_logger = TimingLogger(logfile, add_header)
else:
logfile = None
timing_logger = None
# Convert wiring plan into cabinet coordinates
b2c = dict(cabinetised_boards)
wires = []
for ((src_board, src_direction), (dst_board, dst_direction), wire_length) \
in flat_wiring_plan:
sc, sf, sb = b2c[src_board]
dc, df, db = b2c[dst_board]
wires.append(((sc, sf, sb, src_direction),
(dc, df, db, dst_direction),
wire_length))
# Filter wires according to user-specified rules
wires = list(filter(wire_filter, wires))
if len(wires) == 0:
parser.error("--subset selects no wires")
if not args.fix:
# If running normally, just run through the full set of wires
wiring_plan = wires
else:
# If running in fix mode, generate a list of fixes to make
correct_wires = set((src, dst) for src, dst, length in wires)
actual_wires = set(wiring_probe.discover_wires())
to_remove = actual_wires - correct_wires
to_add = correct_wires - actual_wires
# Remove all bad wires first, then re-add good ones (note ordering now is
# just reset to cabinets right-to-left, frames top-to-bottom and boards
# left-to-right).
wiring_plan = [(src, dst, None) for src, dst in sorted(to_remove)]
for src, dst, length in wires:
if (src, dst) in to_add:
wiring_plan.append((src, dst, length))
if len(wiring_plan) == 0:
print("No corrections required.")
return 0
# Intialise the GUI and launch the mainloop
ui = InteractiveWiringGuide(cabinet=cabinet,
wire_lengths=wire_lengths,
wires=wiring_plan,
bmp_controller=bmp_controller,
use_tts=not args.no_tts,
focus=focus,
wiring_probe=wiring_probe,
auto_advance=not args.no_auto_advance,
timing_logger=timing_logger)
ui.mainloop()
if logfile is not None:
logfile.close()
return 0
def test_partition_wires(): # Verify the correctness with a two-cabinet system. hex_boards, folded_boards = utils.folded_torus(10, 8, "shear", "rows", (2,2)) cabinetised_boards = transforms.cabinetise(folded_boards, 2, 5, 24) all_wires = plan.enumerate_wires(cabinetised_boards) between_boards, between_frames, between_cabinets =\ plan.partition_wires(all_wires, cabinetised_boards) # Should have the correct set of categories assert len(between_boards) == 5 * 2 assert len(between_frames) == 2 seen_wires = set() b2c = dict(cabinetised_boards) for (cabinet, frame), wires in iteritems(between_boards): assert 0 <= cabinet < 2 assert 0 <= frame < 5 for ((src_board, src_direction), (dst_board, dst_direction)) in wires: # Check it really does stay in the same frame sc, sf, sb = b2c[src_board] dc, df, db = b2c[dst_board] assert sc == cabinet assert dc == cabinet assert sf == frame assert df == frame assert (sc, sf) == (dc, df) assert src_direction.opposite == dst_direction # Check we've not seen it before wire = ((src_board, src_direction), (dst_board, dst_direction)) assert wire not in seen_wires seen_wires.add(wire) for cabinet, wires in iteritems(between_frames): assert 0 <= cabinet < 2 for ((src_board, src_direction), (dst_board, dst_direction)) in wires: # Check it really does stay in the same cabinet sc, sf, sb = b2c[src_board] dc, df, db = b2c[dst_board] assert sc == cabinet assert dc == cabinet assert sc == dc assert sf != df assert src_direction.opposite == dst_direction # Check we've not seen it before wire = ((src_board, src_direction), (dst_board, dst_direction)) assert wire not in seen_wires seen_wires.add(wire) from pprint import pprint for ((src_board, src_direction), (dst_board, dst_direction)) in between_cabinets: # Check it really doesn't stay within a cabinet sc, sf, sb = b2c[src_board] dc, df, db = b2c[dst_board] assert sc != dc assert src_direction.opposite == dst_direction # Check we've not seen it before wire = ((src_board, src_direction), (dst_board, dst_direction)) assert wire not in seen_wires seen_wires.add(wire) # Should have seen all wires too! assert seen_wires == set(all_wires)
def test_generate_wiring_plan(): # Since generate_wiring_plan is largely a wrapper around the functions tested # above, this simply tests that the output is not insane... hex_boards, folded_boards = utils.folded_torus(10, 8, "shear", "rows", (2,2)) cabinetised_boards = transforms.cabinetise(folded_boards, 2, 5, 24) cab = cabinet.Cabinet(**real) physical_boards = transforms.cabinet_to_physical(cabinetised_boards, cab) all_wires = plan.enumerate_wires(cabinetised_boards) available_wire_lengths = [0.3, 0.5, 1.0] b2c = dict(cabinetised_boards) between_boards, between_frames, between_cabinets =\ plan.generate_wiring_plan(cabinetised_boards, physical_boards, cab.board_wire_offset, available_wire_lengths, 0.0) seen_wires = set() assert set(between_boards) == set((c, f, d) for c in range(cab.num_cabinets) for f in range(cab.frames_per_cabinet) for d in [Direction.north, Direction.south_west, Direction.east]) for (cabinet_num, frame_num, direction), wires in iteritems(between_boards): for ((src_board, src_direction), (dst_board, dst_direction), wire_length) in wires: # The board does stay in the frame_num and goes in the specified direction c, f, b = b2c[src_board] assert c == cabinet_num assert f == frame_num assert src_direction == direction c, f, b = b2c[dst_board] assert c == cabinet_num assert f == frame_num assert dst_direction == direction.opposite # The wire length chosen should exist assert wire_length in available_wire_lengths # Check we've not seen it before wire = ((src_board, src_direction), (dst_board, dst_direction)) assert wire not in seen_wires seen_wires.add(wire) assert set(between_frames) == set((c, d) for c in range(cab.num_cabinets) for d in [Direction.north, Direction.south_west, Direction.east]) for (cabinet_num, direction), wires in iteritems(between_frames): for ((src_board, src_direction), (dst_board, dst_direction), wire_length) in wires: # The board does stay in the cabinet and goes in the specified direction c, f, b = b2c[src_board] assert c == cabinet_num assert src_direction == direction c, f, b = b2c[dst_board] assert c == cabinet_num assert dst_direction == direction.opposite assert wire_length in available_wire_lengths # Check we've not seen it before wire = ((src_board, src_direction), (dst_board, dst_direction)) assert wire not in seen_wires seen_wires.add(wire) assert set(between_cabinets) == set([Direction.north, Direction.south_west, Direction.east]) for direction, wires in iteritems(between_cabinets): for ((src_board, src_direction), (dst_board, dst_direction), wire_length) in wires: # The board does stay in the cabinet and goes in the specified direction assert src_direction == direction assert dst_direction == direction.opposite assert wire_length in available_wire_lengths # Check we've not seen it before wire = ((src_board, src_direction), (dst_board, dst_direction)) assert wire not in seen_wires seen_wires.add(wire) # All wires should have been seen assert seen_wires == set(all_wires)
def main(args=None):
parser = argparse.ArgumentParser(
description="Validate the wiring of a SpiNNaker system.")
arguments.add_version_args(parser)
parser.add_argument("--verbose", "-v", action="store_true", default=False,
help="list all incorrect and missing wires")
arguments.add_topology_args(parser)
arguments.add_cabinet_args(parser)
arguments.add_bmp_args(parser)
# Process command-line arguments
args = parser.parse_args(args)
(w, h), transformation, uncrinkle_direction, folds =\
arguments.get_topology_from_args(parser, args)
cabinet, num_frames = arguments.get_cabinets_from_args(parser, args)
bmp_ips = arguments.get_bmps_from_args(parser, args,
cabinet.num_cabinets,
num_frames)
if len(bmp_ips) == 0:
parser.error("BMP host names must be provided for every frame.")
# Generate folded system
hex_boards, folded_boards = folded_torus(w, h,
transformation,
uncrinkle_direction,
folds)
# Divide into cabinets
cabinetised_boards = transforms.cabinetise(folded_boards,
cabinet.num_cabinets,
num_frames,
cabinet.boards_per_frame)
cabinetised_boards = transforms.remove_gaps(cabinetised_boards)
# Generate list of wires
wires = plan.enumerate_wires(cabinetised_boards)
# Set up the wiring probe
bmp_controller = BMPController(bmp_ips)
if cabinet.num_cabinets == 1 and num_frames == 1:
num_boards = 3 * w * h
else:
num_boards = cabinet.boards_per_frame
wiring_probe = probe.WiringProbe(bmp_controller,
cabinet.num_cabinets,
num_frames,
num_boards)
# Check for the presence of every wire
missing = []
b2c = dict(cabinetised_boards)
for ((src_board, src_direction), (dst_board, dst_direction)) in wires:
src = tuple(list(b2c[src_board]) + [src_direction])
dst = tuple(list(b2c[dst_board]) + [dst_direction])
actual_dst = wiring_probe.get_link_target(*src)
actual_src = wiring_probe.get_link_target(*dst)
if actual_dst != dst or actual_src != src:
missing.append((src, dst))
if missing:
sys.stderr.write("{} wires missing or erroneously connected.\n".format(
len(missing), len(wires)))
if args.verbose:
for src, dst in missing:
print("C:{} F:{} B:{} {} <--> C:{} F:{} B:{} {}".format(
src[0], src[1], src[2], src[3].name.replace("_", " "),
dst[0], dst[1], dst[2], dst[3].name.replace("_", " ")))
else:
print("Add --verbose for a complete list.")
return -1
else:
sys.stderr.write("All {} wires correctly connected.\n".format(len(wires)))
return 0
def test_partition_wires():
# Verify the correctness with a two-cabinet system.
hex_boards, folded_boards = utils.folded_torus(10, 8, "shear", "rows",
(2, 2))
cabinetised_boards = transforms.cabinetise(folded_boards, 2, 5, 24)
all_wires = plan.enumerate_wires(cabinetised_boards)
between_boards, between_frames, between_cabinets =\
plan.partition_wires(all_wires, cabinetised_boards)
# Should have the correct set of categories
assert len(between_boards) == 5 * 2
assert len(between_frames) == 2
seen_wires = set()
b2c = dict(cabinetised_boards)
for (cabinet, frame), wires in iteritems(between_boards):
assert 0 <= cabinet < 2
assert 0 <= frame < 5
for ((src_board, src_direction), (dst_board, dst_direction)) in wires:
# Check it really does stay in the same frame
sc, sf, sb = b2c[src_board]
dc, df, db = b2c[dst_board]
assert sc == cabinet
assert dc == cabinet
assert sf == frame
assert df == frame
assert (sc, sf) == (dc, df)
assert src_direction.opposite == dst_direction
# Check we've not seen it before
wire = ((src_board, src_direction), (dst_board, dst_direction))
assert wire not in seen_wires
seen_wires.add(wire)
for cabinet, wires in iteritems(between_frames):
assert 0 <= cabinet < 2
for ((src_board, src_direction), (dst_board, dst_direction)) in wires:
# Check it really does stay in the same cabinet
sc, sf, sb = b2c[src_board]
dc, df, db = b2c[dst_board]
assert sc == cabinet
assert dc == cabinet
assert sc == dc
assert sf != df
assert src_direction.opposite == dst_direction
# Check we've not seen it before
wire = ((src_board, src_direction), (dst_board, dst_direction))
assert wire not in seen_wires
seen_wires.add(wire)
from pprint import pprint
for ((src_board, src_direction), (dst_board,
dst_direction)) in between_cabinets:
# Check it really doesn't stay within a cabinet
sc, sf, sb = b2c[src_board]
dc, df, db = b2c[dst_board]
assert sc != dc
assert src_direction.opposite == dst_direction
# Check we've not seen it before
wire = ((src_board, src_direction), (dst_board, dst_direction))
assert wire not in seen_wires
seen_wires.add(wire)
# Should have seen all wires too!
assert seen_wires == set(all_wires)