class FileSwitcher(QDialog):
"""A Sublime-like file switcher."""
sig_goto_file = Signal(int)
sig_close_file = Signal(int)
# Constants that define the mode in which the list widget is working
# FILE_MODE is for a list of files, SYMBOL_MODE if for a list of symbols
# in a given file when using the '@' symbol.
FILE_MODE, SYMBOL_MODE = [1, 2]
def __init__(self, parent, tabs, data):
QDialog.__init__(self, parent)
# Variables
self.tabs = tabs # Editor stack tabs
self.data = data # Editor data
self.mode = self.FILE_MODE # By default start in this mode
self.initial_cursors = None # {fullpath: QCursor}
self.initial_path = None # Fullpath of initial active editor
self.initial_editor = None # Initial active editor
self.line_number = None # Selected line number in filer
self.is_visible = False # Is the switcher visible?
help_text = _("Press <b>Enter</b> to switch files or <b>Esc</b> to "
"cancel.<br><br>Type to filter filenames.<br><br>"
"Use <b>:number</b> to go to a line, e.g. "
"<b><code>main:42</code></b><br>"
"Use <b>@symbol_text</b> to go to a symbol, e.g. "
"<b><code>@init</code></b>"
"<br><br> Press <b>Ctrl+W</b> to close current tab.<br>")
# Either allow searching for a line number or a symbol but not both
regex = QRegExp("([A-Za-z0-9_]{0,100}@[A-Za-z0-9_]{0,100})|" +
"([A-Za-z]{0,100}:{0,1}[0-9]{0,100})")
# Widgets
self.edit = QLineEdit(self)
self.help = HelperToolButton()
self.list = QListWidget(self)
self.filter = KeyPressFilter()
regex_validator = QRegExpValidator(regex, self.edit)
# Widgets setup
self.setWindowFlags(Qt.Popup | Qt.FramelessWindowHint)
self.setWindowOpacity(0.95)
self.edit.installEventFilter(self.filter)
self.edit.setValidator(regex_validator)
self.help.setToolTip(help_text)
self.list.setItemDelegate(HTMLDelegate(self))
# Layout
edit_layout = QHBoxLayout()
edit_layout.addWidget(self.edit)
edit_layout.addWidget(self.help)
layout = QVBoxLayout()
layout.addLayout(edit_layout)
layout.addWidget(self.list)
self.setLayout(layout)
# Signals
self.rejected.connect(self.restore_initial_state)
self.filter.sig_up_key_pressed.connect(self.previous_row)
self.filter.sig_down_key_pressed.connect(self.next_row)
self.edit.returnPressed.connect(self.accept)
self.edit.textChanged.connect(self.setup)
self.list.itemSelectionChanged.connect(self.item_selection_changed)
self.list.clicked.connect(self.edit.setFocus)
# Setup
self.save_initial_state()
self.set_dialog_position()
self.setup()
# --- Properties
@property
def editors(self):
return [self.tabs.widget(index) for index in range(self.tabs.count())]
@property
def line_count(self):
return [editor.get_line_count() for editor in self.editors]
@property
def save_status(self):
return [getattr(td, 'newly_created', False) for td in self.data]
@property
def paths(self):
return [getattr(td, 'filename', None) for td in self.data]
@property
def filenames(self):
return [self.tabs.tabText(index) for index in range(self.tabs.count())]
@property
def current_path(self):
return self.paths_by_editor[self.get_editor()]
@property
def paths_by_editor(self):
return dict(zip(self.editors, self.paths))
@property
def editors_by_path(self):
return dict(zip(self.paths, self.editors))
@property
def filter_text(self):
"""Get the normalized (lowecase) content of the filter text."""
return to_text_string(self.edit.text()).lower()
def save_initial_state(self):
"""Saves initial cursors and initial active editor."""
paths = self.paths
self.initial_editor = self.get_editor()
self.initial_cursors = {}
for i, editor in enumerate(self.editors):
if editor is self.initial_editor:
self.initial_path = paths[i]
self.initial_cursors[paths[i]] = editor.textCursor()
def accept(self):
self.is_visible = False
QDialog.accept(self)
self.list.clear()
def restore_initial_state(self):
"""Restores initial cursors and initial active editor."""
self.list.clear()
self.is_visible = False
editors = self.editors_by_path
for path in self.initial_cursors:
cursor = self.initial_cursors[path]
if path in editors:
self.set_editor_cursor(editors[path], cursor)
if self.initial_editor in self.paths_by_editor:
index = self.paths.index(self.initial_path)
self.sig_goto_file.emit(index)
def set_dialog_position(self):
"""Positions the file switcher dialog in the center of the editor."""
parent = self.parent()
geo = parent.geometry()
width = self.list.width() # This has been set in setup
left = parent.geometry().width()/2 - width/2
top = 0
while parent:
geo = parent.geometry()
top += geo.top()
left += geo.left()
parent = parent.parent()
# Note: the +1 pixel on the top makes it look better
self.move(left, top + self.tabs.tabBar().geometry().height() + 1)
def fix_size(self, content, extra=50):
"""Adjusts the width of the file switcher, based on the content."""
# Update size of dialog based on longest shortened path
strings = []
if content:
for rich_text in content:
label = QLabel(rich_text)
label.setTextFormat(Qt.PlainText)
strings.append(label.text())
fm = label.fontMetrics()
max_width = max([fm.width(s)*1.3 for s in strings])
self.list.setMinimumWidth(max_width + extra)
self.set_dialog_position()
# --- Helper methods: List widget
def count(self):
"""Gets the item count in the list widget."""
return self.list.count()
def current_row(self):
"""Returns the current selected row in the list widget."""
return self.list.currentRow()
def set_current_row(self, row):
"""Sets the current selected row in the list widget."""
return self.list.setCurrentRow(row)
def select_row(self, steps):
"""Select row in list widget based on a number of steps with direction.
Steps can be positive (next rows) or negative (previous rows).
"""
row = self.current_row() + steps
if 0 <= row < self.count():
self.set_current_row(row)
def previous_row(self):
"""Select previous row in list widget."""
self.select_row(-1)
def next_row(self):
"""Select next row in list widget."""
self.select_row(+1)
# --- Helper methods: Editor
def get_editor(self, index=None, path=None):
"""Get editor by index or path.
If no path or index specified the current active editor is returned
"""
if index:
return self.tabs.widget(index)
elif path:
return self.tabs.widget(index)
else:
return self.parent().get_current_editor()
def set_editor_cursor(self, editor, cursor):
"""Set the cursor of an editor."""
pos = cursor.position()
anchor = cursor.anchor()
new_cursor = QTextCursor()
if pos == anchor:
new_cursor.movePosition(pos)
else:
new_cursor.movePosition(anchor)
new_cursor.movePosition(pos, QTextCursor.KeepAnchor)
editor.setTextCursor(cursor)
def goto_line(self, line_number):
"""Go to specified line number in current active editor."""
if line_number:
line_number = int(line_number)
editor = self.get_editor()
editor.go_to_line(min(line_number, editor.get_line_count()))
# --- Helper methods: Outline explorer
def get_symbol_list(self):
"""Get the object explorer data."""
return self.get_editor().highlighter.get_outlineexplorer_data()
# --- Handlers
def item_selection_changed(self):
"""List widget item selection change handler."""
row = self.current_row()
if self.count() and row >= 0:
if self.mode == self.FILE_MODE:
try:
stack_index = self.paths.index(self.filtered_path[row])
self.sig_goto_file.emit(stack_index)
self.goto_line(self.line_number)
self.edit.setFocus()
except ValueError:
pass
else:
line_number = self.filtered_symbol_lines[row]
self.goto_line(line_number)
def setup_file_list(self, filter_text, current_path):
"""Setup list widget content for file list display."""
short_paths = shorten_paths(self.paths, self.save_status)
paths = self.paths
results = []
trying_for_line_number = ':' in filter_text
# Get optional line number
if trying_for_line_number:
filter_text, line_number = filter_text.split(':')
else:
line_number = None
# Get all available filenames and get the scores for "fuzzy" matching
scores = get_search_scores(filter_text, self.filenames,
template="<b>{0}</b>")
# Build the text that will appear on the list widget
for index, score in enumerate(scores):
text, rich_text, score_value = score
if score_value != -1:
text_item = '<big>' + rich_text + '</big>'
if trying_for_line_number:
text_item += " [{0:} {1:}]".format(self.line_count[index],
_("lines"))
text_item += "<br><i>{0:}</i>".format(
short_paths[index])
results.append((score_value, index, text_item))
# Sort the obtained scores and populate the list widget
self.filtered_path = []
for result in sorted(results):
index = result[1]
text = result[-1]
path = paths[index]
item = QListWidgetItem(self.tabs.tabIcon(index), text)
item.setToolTip(path)
item.setSizeHint(QSize(0, 25))
self.list.addItem(item)
self.filtered_path.append(path)
# Move selected item in list accordingly and update list size
if current_path in self.filtered_path:
self.set_current_row(self.filtered_path.index(current_path))
elif self.filtered_path:
self.set_current_row(0)
self.fix_size(short_paths)
# If a line number is searched look for it
self.line_number = line_number
self.goto_line(line_number)
def setup_symbol_list(self, filter_text, current_path):
"""Setup list widget content for symbol list display."""
# Get optional symbol name
filter_text, symbol_text = filter_text.split('@')
# Fetch the Outline explorer data, get the icons and values
oedata = self.get_symbol_list()
icons = get_python_symbol_icons(oedata)
symbol_list = process_python_symbol_data(oedata)
line_fold_token = [(item[0], item[2], item[3]) for item in symbol_list]
choices = [item[1] for item in symbol_list]
scores = get_search_scores(symbol_text, choices, template="<b>{0}</b>")
# Build the text that will appear on the list widget
results = []
lines = []
self.filtered_symbol_lines = []
for index, score in enumerate(scores):
text, rich_text, score_value = score
line, fold_level, token = line_fold_token[index]
lines.append(text)
if score_value != -1:
results.append((score_value, line, text, rich_text,
fold_level, icons[index], token))
template_1 = '<code>{0}<big>{1} {2}</big></code>'
template_2 = '<br><code>{0}</code><i>[Line {1}]</i>'
for (score, line, text, rich_text, fold_level, icon,
token) in sorted(results):
fold_space = ' '*(fold_level)
line_number = line + 1
self.filtered_symbol_lines.append(line_number)
textline = template_1.format(fold_space, token, rich_text)
textline += template_2.format(fold_space, line_number)
item = QListWidgetItem(icon, textline)
item.setSizeHint(QSize(0, 16))
self.list.addItem(item)
# Move selected item in list accordingly
# NOTE: Doing this is causing two problems:
# 1. It makes the cursor to auto-jump to the last selected
# symbol after opening or closing a different file
# 2. It moves the cursor to the first symbol by default,
# which is very distracting.
# That's why this line is commented!
# self.set_current_row(0)
# Update list size
self.fix_size(lines, extra=125)
def setup(self):
"""Setup list widget content."""
if not self.tabs.count():
self.close()
return
self.list.clear()
current_path = self.current_path
filter_text = self.filter_text
# Get optional line or symbol to define mode and method handler
trying_for_symbol = ('@' in self.filter_text)
if trying_for_symbol:
self.mode = self.SYMBOL_MODE
self.setup_symbol_list(filter_text, current_path)
else:
self.mode = self.FILE_MODE
self.setup_file_list(filter_text, current_path)
class NumpyArrayDialog(QDialog):
def __init__(self, parent=None, inline=True, offset=0, force_float=False):
QDialog.__init__(self, parent=parent)
self._parent = parent
self._text = None
self._valid = None
self._offset = offset
# TODO: add this as an option in the General Preferences?
self._force_float = force_float
self._help_inline = _("""
<b>Numpy Array/Matrix Helper</b><br>
Type an array in Matlab : <code>[1 2;3 4]</code><br>
or Spyder simplified syntax : <code>1 2;3 4</code>
<br><br>
Hit 'Enter' for array or 'Ctrl+Enter' for matrix.
<br><br>
<b>Hint:</b><br>
Use two spaces or two tabs to generate a ';'.
""")
self._help_table = _("""
<b>Numpy Array/Matrix Helper</b><br>
Enter an array in the table. <br>
Use Tab to move between cells.
<br><br>
Hit 'Enter' for array or 'Ctrl+Enter' for matrix.
<br><br>
<b>Hint:</b><br>
Use two tabs at the end of a row to move to the next row.
""")
# Widgets
self._button_warning = QToolButton()
self._button_help = HelperToolButton()
self._button_help.setIcon(ima.icon('MessageBoxInformation'))
style = """
QToolButton {
border: 1px solid grey;
padding:0px;
border-radius: 2px;
background-color: qlineargradient(x1: 0, y1: 0, x2: 0, y2: 1,
stop: 0 #f6f7fa, stop: 1 #dadbde);
}
"""
self._button_help.setStyleSheet(style)
if inline:
self._button_help.setToolTip(self._help_inline)
self._text = NumpyArrayInline(self)
self._widget = self._text
else:
self._button_help.setToolTip(self._help_table)
self._table = NumpyArrayTable(self)
self._widget = self._table
style = """
QDialog {
margin:0px;
border: 1px solid grey;
padding:0px;
border-radius: 2px;
}"""
self.setStyleSheet(style)
style = """
QToolButton {
margin:1px;
border: 0px solid grey;
padding:0px;
border-radius: 0px;
}"""
self._button_warning.setStyleSheet(style)
# widget setup
self.setWindowFlags(Qt.Window | Qt.Dialog | Qt.FramelessWindowHint)
self.setModal(True)
self.setWindowOpacity(0.90)
self._widget.setMinimumWidth(200)
# layout
self._layout = QHBoxLayout()
self._layout.addWidget(self._widget)
self._layout.addWidget(self._button_warning, 1, Qt.AlignTop)
self._layout.addWidget(self._button_help, 1, Qt.AlignTop)
self.setLayout(self._layout)
self._widget.setFocus()
def keyPressEvent(self, event):
"""
Qt override.
"""
QToolTip.hideText()
ctrl = event.modifiers() & Qt.ControlModifier
if event.key() in [Qt.Key_Enter, Qt.Key_Return]:
if ctrl:
self.process_text(array=False)
else:
self.process_text(array=True)
self.accept()
else:
QDialog.keyPressEvent(self, event)
def event(self, event):
"""
Qt Override.
Usefull when in line edit mode.
"""
if event.type() == QEvent.KeyPress and event.key() == Qt.Key_Tab:
return False
return QWidget.event(self, event)
def process_text(self, array=True):
"""
Construct the text based on the entered content in the widget.
"""
if array:
prefix = 'np.array([['
else:
prefix = 'np.matrix([['
suffix = ']])'
values = self._widget.text().strip()
if values != '':
# cleans repeated spaces
exp = r'(\s*)' + ROW_SEPARATOR + r'(\s*)'
values = re.sub(exp, ROW_SEPARATOR, values)
values = re.sub("\s+", " ", values)
values = re.sub("]$", "", values)
values = re.sub("^\[", "", values)
values = re.sub(ROW_SEPARATOR + r'*$', '', values)
# replaces spaces by commas
values = values.replace(' ', ELEMENT_SEPARATOR)
# iterate to find number of rows and columns
new_values = []
rows = values.split(ROW_SEPARATOR)
nrows = len(rows)
ncols = []
for row in rows:
new_row = []
elements = row.split(ELEMENT_SEPARATOR)
ncols.append(len(elements))
for e in elements:
num = e
# replaces not defined values
if num in NAN_VALUES:
num = 'np.nan'
# Convert numbers to floating point
if self._force_float:
try:
num = str(float(e))
except:
pass
new_row.append(num)
new_values.append(ELEMENT_SEPARATOR.join(new_row))
new_values = ROW_SEPARATOR.join(new_values)
values = new_values
# Check validity
if len(set(ncols)) == 1:
self._valid = True
else:
self._valid = False
# Single rows are parsed as 1D arrays/matrices
if nrows == 1:
prefix = prefix[:-1]
suffix = suffix.replace("]])", "])")
# Fix offset
offset = self._offset
braces = BRACES.replace(' ', '\n' + ' '*(offset + len(prefix) - 1))
values = values.replace(ROW_SEPARATOR, braces)
text = "{0}{1}{2}".format(prefix, values, suffix)
self._text = text
else:
self._text = ''
self.update_warning()
def update_warning(self):
"""
Updates the icon and tip based on the validity of the array content.
"""
widget = self._button_warning
if not self.is_valid():
tip = _('Array dimensions not valid')
widget.setIcon(ima.icon('MessageBoxWarning'))
widget.setToolTip(tip)
QToolTip.showText(self._widget.mapToGlobal(QPoint(0, 5)), tip)
else:
self._button_warning.setToolTip('')
def is_valid(self):
"""
Return if the current array state is valid.
"""
return self._valid
def text(self):
"""
Return the parsed array/matrix text.
"""
return self._text
@property
def array_widget(self):
"""
Return the array builder widget.
"""
return self._widget
class ShortcutEditor(QDialog):
"""A dialog for entering key sequences."""
def __init__(self, parent, context, name, sequence, shortcuts):
super(ShortcutEditor, self).__init__(parent)
self._parent = parent
self.context = context
self.npressed = 0
self.keys = set()
self.key_modifiers = set()
self.key_non_modifiers = list()
self.key_text = list()
self.sequence = sequence
self.new_sequence = None
self.edit_state = True
self.shortcuts = shortcuts
# Widgets
self.label_info = QLabel()
self.label_info.setText(_("Press the new shortcut and select 'Ok': \n"
"(Press 'Tab' once to switch focus between the shortcut entry \n"
"and the buttons below it)"))
self.label_current_sequence = QLabel(_("Current shortcut:"))
self.text_current_sequence = QLabel(sequence)
self.label_new_sequence = QLabel(_("New shortcut:"))
self.text_new_sequence = CustomLineEdit(self)
self.text_new_sequence.setPlaceholderText(sequence)
self.helper_button = HelperToolButton()
self.helper_button.hide()
self.label_warning = QLabel()
self.label_warning.hide()
bbox = QDialogButtonBox(QDialogButtonBox.Ok | QDialogButtonBox.Cancel)
self.button_ok = bbox.button(QDialogButtonBox.Ok)
self.button_cancel = bbox.button(QDialogButtonBox.Cancel)
# Setup widgets
self.setWindowTitle(_('Shortcut: {0}').format(name))
self.button_ok.setFocusPolicy(Qt.NoFocus)
self.button_ok.setEnabled(False)
self.button_cancel.setFocusPolicy(Qt.NoFocus)
self.helper_button.setToolTip('')
self.helper_button.setFocusPolicy(Qt.NoFocus)
style = """
QToolButton {
margin:1px;
border: 0px solid grey;
padding:0px;
border-radius: 0px;
}"""
self.helper_button.setStyleSheet(style)
self.text_new_sequence.setFocusPolicy(Qt.NoFocus)
self.label_warning.setFocusPolicy(Qt.NoFocus)
# Layout
spacing = 5
layout_sequence = QGridLayout()
layout_sequence.addWidget(self.label_info, 0, 0, 1, 3)
layout_sequence.addItem(QSpacerItem(spacing, spacing), 1, 0, 1, 2)
layout_sequence.addWidget(self.label_current_sequence, 2, 0)
layout_sequence.addWidget(self.text_current_sequence, 2, 2)
layout_sequence.addWidget(self.label_new_sequence, 3, 0)
layout_sequence.addWidget(self.helper_button, 3, 1)
layout_sequence.addWidget(self.text_new_sequence, 3, 2)
layout_sequence.addWidget(self.label_warning, 4, 2, 1, 2)
layout = QVBoxLayout()
layout.addLayout(layout_sequence)
layout.addSpacing(spacing)
layout.addWidget(bbox)
self.setLayout(layout)
# Signals
bbox.accepted.connect(self.accept)
bbox.rejected.connect(self.reject)
def keyPressEvent(self, e):
"""Qt override."""
key = e.key()
# Check if valid keys
if key not in VALID_KEYS:
self.invalid_key_flag = True
return
self.npressed += 1
self.key_non_modifiers.append(key)
self.key_modifiers.add(key)
self.key_text.append(e.text())
self.invalid_key_flag = False
debug_print('key {0}, npressed: {1}'.format(key, self.npressed))
if key == Qt.Key_unknown:
return
# The user clicked just and only the special keys
# Ctrl, Shift, Alt, Meta.
if (key == Qt.Key_Control or
key == Qt.Key_Shift or
key == Qt.Key_Alt or
key == Qt.Key_Meta):
return
modifiers = e.modifiers()
if modifiers & Qt.ShiftModifier:
key += Qt.SHIFT
if modifiers & Qt.ControlModifier:
key += Qt.CTRL
if sys.platform == 'darwin':
self.npressed -= 1
debug_print('decrementing')
if modifiers & Qt.AltModifier:
key += Qt.ALT
if modifiers & Qt.MetaModifier:
key += Qt.META
self.keys.add(key)
def toggle_state(self):
"""Switch between shortcut entry and Accept/Cancel shortcut mode."""
self.edit_state = not self.edit_state
if not self.edit_state:
self.text_new_sequence.setEnabled(False)
if self.button_ok.isEnabled():
self.button_ok.setFocus()
else:
self.button_cancel.setFocus()
else:
self.text_new_sequence.setEnabled(True)
self.text_new_sequence.setFocus()
def nonedit_keyrelease(self, e):
"""Key release event for non-edit state."""
key = e.key()
if key in [Qt.Key_Escape]:
self.close()
return
if key in [Qt.Key_Left, Qt.Key_Right, Qt.Key_Up,
Qt.Key_Down]:
if self.button_ok.hasFocus():
self.button_cancel.setFocus()
else:
self.button_ok.setFocus()
def keyReleaseEvent(self, e):
"""Qt override."""
self.npressed -= 1
if self.npressed <= 0:
key = e.key()
if len(self.keys) == 1 and key == Qt.Key_Tab:
self.toggle_state()
return
if len(self.keys) == 1 and key == Qt.Key_Escape:
self.set_sequence('')
self.label_warning.setText(_("Please introduce a different "
"shortcut"))
if len(self.keys) == 1 and key in [Qt.Key_Return, Qt.Key_Enter]:
self.toggle_state()
return
if not self.edit_state:
self.nonedit_keyrelease(e)
else:
debug_print('keys: {}'.format(self.keys))
if self.keys and key != Qt.Key_Escape:
self.validate_sequence()
self.keys = set()
self.key_modifiers = set()
self.key_non_modifiers = list()
self.key_text = list()
self.npressed = 0
def check_conflicts(self):
"""Check shortcuts for conflicts."""
conflicts = []
for index, shortcut in enumerate(self.shortcuts):
sequence = str(shortcut.key)
if sequence == self.new_sequence and \
(shortcut.context == self.context or shortcut.context == '_' or
self.context == '_'):
conflicts.append(shortcut)
return conflicts
def update_warning(self, warning_type=NO_WARNING, conflicts=[]):
"""Update warning label to reflect conflict status of new shortcut"""
if warning_type == NO_WARNING:
warn = False
tip = 'This shortcut is correct!'
elif warning_type == SEQUENCE_CONFLICT:
template = '<i>{0}<b>{1}</b></i>'
tip_title = _('The new shorcut conflicts with:') + '<br>'
tip_body = ''
for s in conflicts:
tip_body += ' - {0}: {1}<br>'.format(s.context, s.name)
tip_body = tip_body[:-4] # Removing last <br>
tip = template.format(tip_title, tip_body)
warn = True
elif warning_type == SEQUENCE_LENGTH:
# Sequences with 5 keysequences (i.e. Ctrl+1, Ctrl+2, Ctrl+3,
# Ctrl+4, Ctrl+5) are invalid
template = '<i>{0}</i>'
tip = _('A compound sequence can have {break} a maximum of '
'4 subsequences.{break}').format(**{'break': '<br>'})
warn = True
elif warning_type == INVALID_KEY:
template = '<i>{0}</i>'
tip = _('Invalid key entered') + '<br>'
warn = True
self.helper_button.show()
if warn:
self.label_warning.show()
self.helper_button.setIcon(get_std_icon('MessageBoxWarning'))
self.button_ok.setEnabled(False)
else:
self.helper_button.setIcon(get_std_icon('DialogApplyButton'))
self.label_warning.setText(tip)
def set_sequence(self, sequence):
"""Set the new shortcut and update buttons."""
if not sequence or self.sequence == sequence:
self.button_ok.setEnabled(False)
different_sequence = False
else:
self.button_ok.setEnabled(True)
different_sequence = True
self.text_new_sequence.setText(sequence)
self.new_sequence = sequence
conflicts = self.check_conflicts()
if conflicts and different_sequence:
warning_type = SEQUENCE_CONFLICT
else:
warning_type = NO_WARNING
self.update_warning(warning_type=warning_type, conflicts=conflicts)
def validate_sequence(self):
"""Provide additional checks for accepting or rejecting shortcuts."""
if self.invalid_key_flag:
self.update_warning(warning_type=INVALID_KEY)
return
for mod in MODIFIERS:
non_mod = set(self.key_non_modifiers)
non_mod.discard(mod)
if mod in self.key_non_modifiers:
self.key_non_modifiers.remove(mod)
self.key_modifiers = self.key_modifiers - non_mod
while u'' in self.key_text:
self.key_text.remove(u'')
self.key_text = [k.upper() for k in self.key_text]
# Fix Backtab, Tab issue
if os.name == 'nt':
if Qt.Key_Backtab in self.key_non_modifiers:
idx = self.key_non_modifiers.index(Qt.Key_Backtab)
self.key_non_modifiers[idx] = Qt.Key_Tab
if len(self.key_modifiers) == 0:
# Filter single key allowed
if self.key_non_modifiers[0] not in VALID_SINGLE_KEYS:
return
# Filter
elif len(self.key_non_modifiers) > 1:
return
# QKeySequence accepts a maximum of 4 different sequences
if len(self.keys) > 4:
# Update warning
self.update_warning(warning_type=SEQUENCE_LENGTH)
return
keys = []
for i in range(len(self.keys)):
key_seq = 0
for m in self.key_modifiers:
key_seq += MODIFIERS[m]
key_seq += self.key_non_modifiers[i]
keys.append(key_seq)
sequence = QKeySequence(*keys)
self.set_sequence(sequence.toString())
class NumpyArrayDialog(QDialog):
""" """
def __init__(self, parent, inline=True, offset=0):
QDialog.__init__(self, parent)
self._parent = parent
self._text = None
self._valid = None
self._offset = offset
# TODO: add this as an option in the General Preferences?
self._force_float = False
self._help_inline = _("""
<b>Numpy Array/Matrix Helper</b><br>
Type an array in Matlab : <code>[1 2;3 4]</code><br>
or Spyder simplified syntax : <code>1 2;3 4</code>
<br><br>
Hit 'Enter' for array or 'Ctrl+Enter' for matrix.
<br><br>
<b>Hint:</b><br>
Use two spaces or two tabs to generate a ';'.
""")
self._help_table = _("""
<b>Numpy Array/Matrix Helper</b><br>
Enter an array in the table. <br>
Use Tab to move between cells.
<br><br>
Hit 'Enter' for array or 'Ctrl+Enter' for matrix.
<br><br>
<b>Hint:</b><br>
Use two tabs at the end of a row to move to the next row.
""")
# widgets
self._button_warning = QToolButton()
self._button_help = HelperToolButton()
self._button_help.setIcon(ima.icon('MessageBoxInformation'))
style = """
QToolButton {
border: 1px solid grey;
padding:0px;
border-radius: 2px;
background-color: qlineargradient(x1: 0, y1: 0, x2: 0, y2: 1,
stop: 0 #f6f7fa, stop: 1 #dadbde);
}
"""
self._button_help.setStyleSheet(style)
if inline:
self._button_help.setToolTip(self._help_inline)
self._text = NumpyArrayInline(self)
self._widget = self._text
else:
self._button_help.setToolTip(self._help_table)
self._table = NumpyArrayTable(self)
self._widget = self._table
style = """
QDialog {
margin:0px;
border: 1px solid grey;
padding:0px;
border-radius: 2px;
}"""
self.setStyleSheet(style)
style = """
QToolButton {
margin:1px;
border: 0px solid grey;
padding:0px;
border-radius: 0px;
}"""
self._button_warning.setStyleSheet(style)
# widget setup
self.setWindowFlags(Qt.Window | Qt.Dialog | Qt.FramelessWindowHint)
self.setModal(True)
self.setWindowOpacity(0.90)
self._widget.setMinimumWidth(200)
# layout
self._layout = QHBoxLayout()
self._layout.addWidget(self._widget)
self._layout.addWidget(self._button_warning, 1, Qt.AlignTop)
self._layout.addWidget(self._button_help, 1, Qt.AlignTop)
self.setLayout(self._layout)
self._widget.setFocus()
def keyPressEvent(self, event):
"""Override Qt method"""
QToolTip.hideText()
ctrl = event.modifiers() & Qt.ControlModifier
if event.key() in [Qt.Key_Enter, Qt.Key_Return]:
if ctrl:
self.process_text(array=False)
else:
self.process_text(array=True)
self.accept()
else:
QDialog.keyPressEvent(self, event)
def event(self, event):
if event.type() == QEvent.KeyPress and event.key() == Qt.Key_Tab:
return False
return QWidget.event(self, event)
def process_text(self, array=True):
""" """
if array:
prefix = 'np.array([['
else:
prefix = 'np.matrix([['
suffix = ']])'
values = self._widget.text().strip()
if values != '':
# cleans repeated spaces
exp = r'(\s*)' + ROW_SEPARATOR + r'(\s*)'
values = re.sub(exp, ROW_SEPARATOR, values)
values = re.sub("\s+", " ", values)
values = re.sub("]$", "", values)
values = re.sub("^\[", "", values)
values = re.sub(ROW_SEPARATOR + r'*$', '', values)
# replaces spaces by commas
values = values.replace(' ', ELEMENT_SEPARATOR)
# iterate to find number of rows and columns
new_values = []
rows = values.split(ROW_SEPARATOR)
nrows = len(rows)
ncols = []
for row in rows:
new_row = []
elements = row.split(ELEMENT_SEPARATOR)
ncols.append(len(elements))
for e in elements:
num = e
# replaces not defined values
if num in NAN_VALUES:
num = 'np.nan'
# Convert numbers to floating point
if self._force_float:
try:
num = str(float(e))
except:
pass
new_row.append(num)
new_values.append(ELEMENT_SEPARATOR.join(new_row))
new_values = ROW_SEPARATOR.join(new_values)
values = new_values
# Check validity
if len(set(ncols)) == 1:
self._valid = True
else:
self._valid = False
# Single rows are parsed as 1D arrays/matrices
if nrows == 1:
prefix = prefix[:-1]
suffix = suffix.replace("]])", "])")
# Fix offset
offset = self._offset
braces = BRACES.replace(' ',
'\n' + ' ' * (offset + len(prefix) - 1))
values = values.replace(ROW_SEPARATOR, braces)
text = "{0}{1}{2}".format(prefix, values, suffix)
self._text = text
else:
self._text = ''
self.update_warning()
def update_warning(self):
""" """
widget = self._button_warning
if not self.is_valid():
tip = _('Array dimensions not valid')
widget.setIcon(ima.icon('MessageBoxWarning'))
widget.setToolTip(tip)
QToolTip.showText(self._widget.mapToGlobal(QPoint(0, 5)), tip)
else:
self._button_warning.setToolTip('')
def is_valid(self):
""" """
return self._valid
def text(self):
""" """
return self._text
def mousePressEvent(self, event):
""" """
pass