def mobilityTest():
"A simple test of mobility"
print '* Simple mobility test'
net = Mininet(topo=LinearTopo(3), switch=MobilitySwitch)
print '* Starting network:'
net.start()
printConnections(net.switches)
print '* Testing network'
net.pingAll()
print '* Identifying switch interface for h1'
h1, old = net.get('h1', 's1')
for s in 2, 3, 1:
new = net['s%d' % s]
port = randint(10, 20)
print '* Moving', h1, 'from', old, 'to', new, 'port', port
hintf, sintf = moveHost(h1, old, new, newPort=port)
print '*', hintf, 'is now connected to', sintf
print '* Clearing out old flows'
for sw in net.switches:
sw.dpctl('del-flows')
print '* New network:'
printConnections(net.switches)
print '* Testing connectivity:'
net.pingAll()
old = new
net.stop()
def testRemoteNet( remote='ubuntu2' ):
"Test remote Node classes"
print '*** Remote Node Test'
net = Mininet( host=RemoteHost, switch=RemoteOVSSwitch,
link=RemoteLink )
c0 = net.addController( 'c0' )
# Make sure controller knows its non-loopback address
Intf( 'eth0', node=c0 ).updateIP()
print "*** Creating local h1"
h1 = net.addHost( 'h1' )
print "*** Creating remote h2"
h2 = net.addHost( 'h2', server=remote )
print "*** Creating local s1"
s1 = net.addSwitch( 's1' )
print "*** Creating remote s2"
s2 = net.addSwitch( 's2', server=remote )
print "*** Adding links"
net.addLink( h1, s1 )
net.addLink( s1, s2 )
net.addLink( h2, s2 )
net.start()
print 'Mininet is running on', quietRun( 'hostname' ).strip()
for node in c0, h1, h2, s1, s2:
print 'Node', node, 'is running on', node.cmd( 'hostname' ).strip()
net.pingAll()
CLI( net )
net.stop()
def intfOptions():
"run various traffic control commands on a single interface"
net = Mininet(autoStaticArp=True)
net.addController('c0')
h1 = net.addHost('h1')
h2 = net.addHost('h2')
s1 = net.addSwitch('s1')
link1 = net.addLink(h1, s1, cls=TCLink)
net.addLink(h2, s1)
net.start()
# flush out latency from reactive forwarding delay
net.pingAll()
info('\n*** Configuring one intf with bandwidth of 5 Mb\n')
link1.intf1.config(bw=5)
info('\n*** Running iperf to test\n')
net.iperf()
info('\n*** Configuring one intf with loss of 50%\n')
link1.intf1.config(loss=50)
info('\n')
net.iperf((h1, h2), l4Type='UDP')
info('\n*** Configuring one intf with delay of 15ms\n')
link1.intf1.config(delay='15ms')
info('\n*** Run a ping to confirm delay\n')
net.pingPairFull()
info('\n*** Done testing\n')
net.stop()
def testRemoteTopo():
"Test remote Node classes using Mininet()/Topo() API"
topo = LinearTopo( 2 )
net = Mininet( topo=topo, host=HostPlacer, switch=SwitchPlacer,
link=RemoteLink, controller=ClusterController )
net.start()
net.pingAll()
net.stop()
def testNsTunnels():
"Test tunnels between nodes in namespaces"
net = Mininet( host=RemoteHost, link=RemoteLink )
h1 = net.addHost( 'h1' )
h2 = net.addHost( 'h2', server='ubuntu2' )
net.addLink( h1, h2 )
net.start()
net.pingAll()
net.stop()
def testPortNumbering():
"""Test port numbering:
Create a network with 5 hosts (using Mininet's
mid-level API) and check that implicit and
explicit port numbering works as expected."""
net = Mininet(controller=Controller)
info('*** Adding controller\n')
net.addController('c0')
info('*** Adding hosts\n')
h1 = net.addHost('h1', ip='10.0.0.1')
h2 = net.addHost('h2', ip='10.0.0.2')
h3 = net.addHost('h3', ip='10.0.0.3')
h4 = net.addHost('h4', ip='10.0.0.4')
h5 = net.addHost('h5', ip='10.0.0.5')
info('*** Adding switch\n')
s1 = net.addSwitch('s1')
info('*** Creating links\n')
# host 1-4 connect to ports 1-4 on the switch
net.addLink(h1, s1)
net.addLink(h2, s1)
net.addLink(h3, s1)
net.addLink(h4, s1)
# specify a different port to connect host 5 to on the switch.
net.addLink(h5, s1, port1=1, port2=9)
info('*** Starting network\n')
net.start()
# print the interfaces and their port numbers
info('\n*** printing and validating the ports '
'running on each interface\n')
for intfs in s1.intfList():
if not intfs.name == "lo":
info(intfs, ': ', s1.ports[intfs], '\n')
info('Validating that', intfs, 'is actually on port',
s1.ports[intfs], '... ')
if validatePort(s1, intfs):
info('Validated.\n')
print '\n'
# test the network with pingall
net.pingAll()
print '\n'
info('*** Stopping network')
net.stop()
def verySimpleLimit(bw=150):
"Absurdly simple limiting test"
intf = custom(TCIntf, bw=bw)
net = Mininet(intf=intf)
h1, h2 = net.addHost('h1'), net.addHost('h2')
net.addLink(h1, h2)
net.start()
net.pingAll()
net.iperf()
h1.cmdPrint('tc -s qdisc ls dev', h1.defaultIntf())
h2.cmdPrint('tc -d class show dev', h2.defaultIntf())
h1.cmdPrint('tc -s qdisc ls dev', h1.defaultIntf())
h2.cmdPrint('tc -d class show dev', h2.defaultIntf())
net.stop()
def multiControllerNet():
"Create a network from semi-scratch with multiple controllers."
net = Mininet(controller=Controller, switch=OVSSwitch)
print "*** Creating (reference) controllers"
c1 = net.addController('c1', port=6633)
c2 = net.addController('c2', port=6634)
print "*** Creating switches"
s1 = net.addSwitch('s1')
s2 = net.addSwitch('s2')
print "*** Creating hosts"
hosts1 = [net.addHost('h%d' % n) for n in 3, 4]
hosts2 = [net.addHost('h%d' % n) for n in 5, 6]
print "*** Creating links"
for h in hosts1:
net.addLink(s1, h)
for h in hosts2:
net.addLink(s2, h)
net.addLink(s1, s2)
print "*** Starting network"
net.build()
c1.start()
c2.start()
s1.start([c1])
s2.start([c2])
print "*** Testing network"
net.pingAll()
print "*** Running CLI"
CLI(net)
print "*** Stopping network"
net.stop()
def bwtest(cpuLimits, period_us=100000, seconds=5):
"""Example/test of link and CPU bandwidth limits
cpu: cpu limit as fraction of overall CPU time"""
topo = TreeTopo(depth=1, fanout=2)
results = {}
for sched in 'rt', 'cfs':
print '*** Testing with', sched, 'bandwidth limiting'
for cpu in cpuLimits:
host = custom(CPULimitedHost,
sched=sched,
period_us=period_us,
cpu=cpu)
try:
net = Mininet(topo=topo, host=host)
# pylint: disable=bare-except
except:
info('*** Skipping host %s\n' % sched)
break
net.start()
net.pingAll()
hosts = [net.getNodeByName(h) for h in topo.hosts()]
client, server = hosts[0], hosts[-1]
server.cmd('iperf -s -p 5001 &')
waitListening(client, server, 5001)
result = client.cmd('iperf -yc -t %s -c %s' %
(seconds, server.IP())).split(',')
bps = float(result[-1])
server.cmdPrint('kill %iperf')
net.stop()
updated = results.get(sched, [])
updated += [(cpu, bps)]
results[sched] = updated
return results
from src.mininet.cli import CLI
from src.mininet.log import lg, info
from src.mininet.net import Mininet
from src.mininet.node import OVSKernelSwitch
from src.mininet.topolib import TreeTopo
def ifconfigTest(net):
"Run ifconfig on all hosts in net."
hosts = net.hosts
for host in hosts:
info(host.cmd('ifconfig'))
if __name__ == '__main__':
lg.setLogLevel('info')
info("*** Initializing Mininet and kernel modules\n")
OVSKernelSwitch.setup()
info("*** Creating network\n")
network = Mininet(TreeTopo(depth=2, fanout=2), switch=OVSKernelSwitch)
info("*** Starting network\n")
network.start()
info("*** Running ping test\n")
network.pingAll()
info("*** Running ifconfig test\n")
ifconfigTest(network)
info("*** Starting CLI (type 'exit' to exit)\n")
CLI(network)
info("*** Stopping network\n")
network.stop()
