def make_model(draw=True):
dict_data = get_data()
y = dict_data['y_param']
sparse_matrix, i = [], 1
for name, value in dict_data.iteritems():
if name != 'y_param':
print 'x{} = {}'.format(i, name)
sparse_matrix.append(value)
i += 1
ones = np.ones(len(sparse_matrix[0]))
X = sm.add_constant(np.column_stack((sparse_matrix[0], ones)))
for ele in sparse_matrix[1:]:
X = sm.add_constant(np.column_stack((ele, X)))
glm_binom = sm.GLM(y, X)
res = glm_binom.fit()
# general info about Gaussian Model (Exp model)
print res.summary()
# This is a general specification test,
# for additional non-linear effects in a model.
# If the p-value of the f-test is below a threshold, e.g. 0.1, then this
# indicates that there might be additional non-linear effects in the model
# and that the linear model is mis-specified.
print reset_ramsey(res, len(sparse_matrix))
check_sum_params(res.params)
if draw:
y_sum = sum(y)
y = [float(item) / y_sum for item in y]
yhat = res.mu
make_observed_values(yhat, y)
make_residual_dependence(yhat, res.resid_pearson)
make_normalised_distribution(res.resid_deviance.copy())
def test_reset_stata():
data = statecrime.load_pandas().data
mod = OLS(data.violent, add_constant(data[["murder", "hs_grad"]]))
res = mod.fit()
stat = reset_ramsey(res, degree=4)
assert_almost_equal(stat.fvalue, 1.52, decimal=2)
assert_almost_equal(stat.pvalue, 0.2221, decimal=4)
exog_idx = list(data.columns).index("urban")
data_arr = np.asarray(data)
vif = variance_inflation_factor(data_arr, exog_idx)
assert_almost_equal(vif, 16.4394, decimal=4)
exog_idx = list(data.columns).index("urban")
vif_df = variance_inflation_factor(data, exog_idx)
assert_almost_equal(vif_df, 16.4394, decimal=4)
def test_all(self):
d = macrodata.load().data
#import datasetswsm.greene as g
#d = g.load('5-1')
#growth rates
gs_l_realinv = 400 * np.diff(np.log(d['realinv']))
gs_l_realgdp = 400 * np.diff(np.log(d['realgdp']))
#simple diff, not growthrate, I want heteroscedasticity later for testing
endogd = np.diff(d['realinv'])
exogd = add_constant(np.c_[np.diff(d['realgdp']), d['realint'][:-1]])
endogg = gs_l_realinv
exogg = add_constant(np.c_[gs_l_realgdp, d['realint'][:-1]])
res_ols = OLS(endogg, exogg).fit()
#print res_ols.params
mod_g1 = GLSAR(endogg, exogg, rho=-0.108136)
res_g1 = mod_g1.fit()
#print res_g1.params
mod_g2 = GLSAR(endogg, exogg, rho=-0.108136) #-0.1335859) from R
res_g2 = mod_g2.iterative_fit(maxiter=5)
#print res_g2.params
rho = -0.108136
# coefficient std. error t-ratio p-value 95% CONFIDENCE INTERVAL
partable = np.array([
[-9.50990, 0.990456, -9.602, 3.65e-018, -11.4631, -7.55670], # ***
[ 4.37040, 0.208146, 21.00, 2.93e-052, 3.95993, 4.78086], # ***
[-0.579253, 0.268009, -2.161, 0.0319, -1.10777, -0.0507346]]) # **
#Statistics based on the rho-differenced data:
result_gretl_g1 = dict(
endog_mean = ("Mean dependent var", 3.113973),
endog_std = ("S.D. dependent var", 18.67447),
ssr = ("Sum squared resid", 22530.90),
mse_resid_sqrt = ("S.E. of regression", 10.66735),
rsquared = ("R-squared", 0.676973),
rsquared_adj = ("Adjusted R-squared", 0.673710),
fvalue = ("F(2, 198)", 221.0475),
f_pvalue = ("P-value(F)", 3.56e-51),
resid_acf1 = ("rho", -0.003481),
dw = ("Durbin-Watson", 1.993858))
#fstatistic, p-value, df1, df2
reset_2_3 = [5.219019, 0.00619, 2, 197, "f"]
reset_2 = [7.268492, 0.00762, 1, 198, "f"]
reset_3 = [5.248951, 0.023, 1, 198, "f"]
#LM-statistic, p-value, df
arch_4 = [7.30776, 0.120491, 4, "chi2"]
#multicollinearity
vif = [1.002, 1.002]
cond_1norm = 6862.0664
determinant = 1.0296049e+009
reciprocal_condition_number = 0.013819244
#Chi-square(2): test-statistic, pvalue, df
normality = [20.2792, 3.94837e-005, 2]
#tests
res = res_g1 #with rho from Gretl
#basic
assert_almost_equal(res.params, partable[:,0], 4)
assert_almost_equal(res.bse, partable[:,1], 6)
assert_almost_equal(res.tvalues, partable[:,2], 2)
assert_almost_equal(res.ssr, result_gretl_g1['ssr'][1], decimal=2)
#assert_almost_equal(res.llf, result_gretl_g1['llf'][1], decimal=7) #not in gretl
#assert_almost_equal(res.rsquared, result_gretl_g1['rsquared'][1], decimal=7) #FAIL
#assert_almost_equal(res.rsquared_adj, result_gretl_g1['rsquared_adj'][1], decimal=7) #FAIL
assert_almost_equal(np.sqrt(res.mse_resid), result_gretl_g1['mse_resid_sqrt'][1], decimal=5)
assert_almost_equal(res.fvalue, result_gretl_g1['fvalue'][1], decimal=4)
assert_approx_equal(res.f_pvalue, result_gretl_g1['f_pvalue'][1], significant=2)
#assert_almost_equal(res.durbin_watson, result_gretl_g1['dw'][1], decimal=7) #TODO
#arch
#sm_arch = smsdia.acorr_lm(res.wresid**2, maxlag=4, autolag=None)
sm_arch = smsdia.het_arch(res.wresid, maxlag=4)
assert_almost_equal(sm_arch[0], arch_4[0], decimal=4)
assert_almost_equal(sm_arch[1], arch_4[1], decimal=6)
#tests
res = res_g2 #with estimated rho
#estimated lag coefficient
assert_almost_equal(res.model.rho, rho, decimal=3)
#basic
assert_almost_equal(res.params, partable[:,0], 4)
assert_almost_equal(res.bse, partable[:,1], 3)
assert_almost_equal(res.tvalues, partable[:,2], 2)
assert_almost_equal(res.ssr, result_gretl_g1['ssr'][1], decimal=2)
#assert_almost_equal(res.llf, result_gretl_g1['llf'][1], decimal=7) #not in gretl
#assert_almost_equal(res.rsquared, result_gretl_g1['rsquared'][1], decimal=7) #FAIL
#assert_almost_equal(res.rsquared_adj, result_gretl_g1['rsquared_adj'][1], decimal=7) #FAIL
assert_almost_equal(np.sqrt(res.mse_resid), result_gretl_g1['mse_resid_sqrt'][1], decimal=5)
assert_almost_equal(res.fvalue, result_gretl_g1['fvalue'][1], decimal=0)
assert_almost_equal(res.f_pvalue, result_gretl_g1['f_pvalue'][1], decimal=6)
#assert_almost_equal(res.durbin_watson, result_gretl_g1['dw'][1], decimal=7) #TODO
c = oi.reset_ramsey(res, degree=2)
compare_ftest(c, reset_2, decimal=(2,4))
c = oi.reset_ramsey(res, degree=3)
compare_ftest(c, reset_2_3, decimal=(2,4))
#arch
#sm_arch = smsdia.acorr_lm(res.wresid**2, maxlag=4, autolag=None)
sm_arch = smsdia.het_arch(res.wresid, maxlag=4)
assert_almost_equal(sm_arch[0], arch_4[0], decimal=1)
assert_almost_equal(sm_arch[1], arch_4[1], decimal=2)
'''
Performing iterative calculation of rho...
ITER RHO ESS
1 -0.10734 22530.9
2 -0.10814 22530.9
Model 4: Cochrane-Orcutt, using observations 1959:3-2009:3 (T = 201)
Dependent variable: ds_l_realinv
rho = -0.108136
coefficient std. error t-ratio p-value
-------------------------------------------------------------
const -9.50990 0.990456 -9.602 3.65e-018 ***
ds_l_realgdp 4.37040 0.208146 21.00 2.93e-052 ***
realint_1 -0.579253 0.268009 -2.161 0.0319 **
Statistics based on the rho-differenced data:
Mean dependent var 3.113973 S.D. dependent var 18.67447
Sum squared resid 22530.90 S.E. of regression 10.66735
R-squared 0.676973 Adjusted R-squared 0.673710
F(2, 198) 221.0475 P-value(F) 3.56e-51
rho -0.003481 Durbin-Watson 1.993858
'''
'''
RESET test for specification (squares and cubes)
Test statistic: F = 5.219019,
with p-value = P(F(2,197) > 5.21902) = 0.00619
RESET test for specification (squares only)
Test statistic: F = 7.268492,
with p-value = P(F(1,198) > 7.26849) = 0.00762
RESET test for specification (cubes only)
Test statistic: F = 5.248951,
with p-value = P(F(1,198) > 5.24895) = 0.023:
'''
'''
Test for ARCH of order 4
coefficient std. error t-ratio p-value
--------------------------------------------------------
alpha(0) 97.0386 20.3234 4.775 3.56e-06 ***
alpha(1) 0.176114 0.0714698 2.464 0.0146 **
alpha(2) -0.0488339 0.0724981 -0.6736 0.5014
alpha(3) -0.0705413 0.0737058 -0.9571 0.3397
alpha(4) 0.0384531 0.0725763 0.5298 0.5968
Null hypothesis: no ARCH effect is present
Test statistic: LM = 7.30776
with p-value = P(Chi-square(4) > 7.30776) = 0.120491:
'''
'''
Variance Inflation Factors
Minimum possible value = 1.0
Values > 10.0 may indicate a collinearity problem
ds_l_realgdp 1.002
realint_1 1.002
VIF(j) = 1/(1 - R(j)^2), where R(j) is the multiple correlation coefficient
between variable j and the other independent variables
Properties of matrix X'X:
1-norm = 6862.0664
Determinant = 1.0296049e+009
Reciprocal condition number = 0.013819244
'''
'''
Test for ARCH of order 4 -
Null hypothesis: no ARCH effect is present
Test statistic: LM = 7.30776
with p-value = P(Chi-square(4) > 7.30776) = 0.120491
Test of common factor restriction -
Null hypothesis: restriction is acceptable
Test statistic: F(2, 195) = 0.426391
with p-value = P(F(2, 195) > 0.426391) = 0.653468
Test for normality of residual -
Null hypothesis: error is normally distributed
Test statistic: Chi-square(2) = 20.2792
with p-value = 3.94837e-005:
'''
#no idea what this is
'''
Augmented regression for common factor test
OLS, using observations 1959:3-2009:3 (T = 201)
Dependent variable: ds_l_realinv
coefficient std. error t-ratio p-value
---------------------------------------------------------------
const -10.9481 1.35807 -8.062 7.44e-014 ***
ds_l_realgdp 4.28893 0.229459 18.69 2.40e-045 ***
realint_1 -0.662644 0.334872 -1.979 0.0492 **
ds_l_realinv_1 -0.108892 0.0715042 -1.523 0.1294
ds_l_realgdp_1 0.660443 0.390372 1.692 0.0923 *
realint_2 0.0769695 0.341527 0.2254 0.8219
Sum of squared residuals = 22432.8
Test of common factor restriction
Test statistic: F(2, 195) = 0.426391, with p-value = 0.653468
'''
################ with OLS, HAC errors
#Model 5: OLS, using observations 1959:2-2009:3 (T = 202)
#Dependent variable: ds_l_realinv
#HAC standard errors, bandwidth 4 (Bartlett kernel)
#coefficient std. error t-ratio p-value 95% CONFIDENCE INTERVAL
#for confidence interval t(199, 0.025) = 1.972
partable = np.array([
[-9.48167, 1.17709, -8.055, 7.17e-014, -11.8029, -7.16049], # ***
[4.37422, 0.328787, 13.30, 2.62e-029, 3.72587, 5.02258], #***
[-0.613997, 0.293619, -2.091, 0.0378, -1.19300, -0.0349939]]) # **
result_gretl_g1 = dict(
endog_mean = ("Mean dependent var", 3.257395),
endog_std = ("S.D. dependent var", 18.73915),
ssr = ("Sum squared resid", 22799.68),
mse_resid_sqrt = ("S.E. of regression", 10.70380),
rsquared = ("R-squared", 0.676978),
rsquared_adj = ("Adjusted R-squared", 0.673731),
fvalue = ("F(2, 199)", 90.79971),
f_pvalue = ("P-value(F)", 9.53e-29),
llf = ("Log-likelihood", -763.9752),
aic = ("Akaike criterion", 1533.950),
bic = ("Schwarz criterion", 1543.875),
hqic = ("Hannan-Quinn", 1537.966),
resid_acf1 = ("rho", -0.107341),
dw = ("Durbin-Watson", 2.213805))
linear_logs = [1.68351, 0.430953, 2, "chi2"]
#for logs: dropping 70 nan or incomplete observations, T=133
#(res_ols.model.exog <=0).any(1).sum() = 69 ?not 70
linear_squares = [7.52477, 0.0232283, 2, "chi2"]
#Autocorrelation, Breusch-Godfrey test for autocorrelation up to order 4
lm_acorr4 = [1.17928, 0.321197, 4, 195, "F"]
lm2_acorr4 = [4.771043, 0.312, 4, "chi2"]
acorr_ljungbox4 = [5.23587, 0.264, 4, "chi2"]
#break
cusum_Harvey_Collier = [0.494432, 0.621549, 198, "t"] #stats.t.sf(0.494432, 198)*2
#see cusum results in files
break_qlr = [3.01985, 0.1, 3, 196, "maxF"] #TODO check this, max at 2001:4
break_chow = [13.1897, 0.00424384, 3, "chi2"] # break at 1984:1
arch_4 = [3.43473, 0.487871, 4, "chi2"]
normality = [23.962, 0.00001, 2, "chi2"]
het_white = [33.503723, 0.000003, 5, "chi2"]
het_breusch_pagan = [1.302014, 0.521520, 2, "chi2"] #TODO: not available
het_breusch_pagan_konker = [0.709924, 0.701200, 2, "chi2"]
reset_2_3 = [5.219019, 0.00619, 2, 197, "f"]
reset_2 = [7.268492, 0.00762, 1, 198, "f"]
reset_3 = [5.248951, 0.023, 1, 198, "f"] #not available
cond_1norm = 5984.0525
determinant = 7.1087467e+008
reciprocal_condition_number = 0.013826504
vif = [1.001, 1.001]
names = 'date residual leverage influence DFFITS'.split()
cur_dir = os.path.abspath(os.path.dirname(__file__))
fpath = os.path.join(cur_dir, 'results/leverage_influence_ols_nostars.txt')
lev = np.genfromtxt(fpath, skip_header=3, skip_footer=1,
converters={0:lambda s: s})
#either numpy 1.6 or python 3.2 changed behavior
if np.isnan(lev[-1]['f1']):
lev = np.genfromtxt(fpath, skip_header=3, skip_footer=2,
converters={0:lambda s: s})
lev.dtype.names = names
res = res_ols #for easier copying
cov_hac = sw.cov_hac_simple(res, nlags=4, use_correction=False)
bse_hac = sw.se_cov(cov_hac)
assert_almost_equal(res.params, partable[:,0], 5)
assert_almost_equal(bse_hac, partable[:,1], 5)
#TODO
assert_almost_equal(res.ssr, result_gretl_g1['ssr'][1], decimal=2)
assert_almost_equal(res.llf, result_gretl_g1['llf'][1], decimal=4) #not in gretl
assert_almost_equal(res.rsquared, result_gretl_g1['rsquared'][1], decimal=6) #FAIL
assert_almost_equal(res.rsquared_adj, result_gretl_g1['rsquared_adj'][1], decimal=6) #FAIL
assert_almost_equal(np.sqrt(res.mse_resid), result_gretl_g1['mse_resid_sqrt'][1], decimal=5)
#f-value is based on cov_hac I guess
#res2 = res.get_robustcov_results(cov_type='HC1')
# TODO: fvalue differs from Gretl, trying any of the HCx
#assert_almost_equal(res2.fvalue, result_gretl_g1['fvalue'][1], decimal=0) #FAIL
#assert_approx_equal(res.f_pvalue, result_gretl_g1['f_pvalue'][1], significant=1) #FAIL
#assert_almost_equal(res.durbin_watson, result_gretl_g1['dw'][1], decimal=7) #TODO
c = oi.reset_ramsey(res, degree=2)
compare_ftest(c, reset_2, decimal=(6,5))
c = oi.reset_ramsey(res, degree=3)
compare_ftest(c, reset_2_3, decimal=(6,5))
linear_sq = smsdia.linear_lm(res.resid, res.model.exog)
assert_almost_equal(linear_sq[0], linear_squares[0], decimal=6)
assert_almost_equal(linear_sq[1], linear_squares[1], decimal=7)
hbpk = smsdia.het_breuschpagan(res.resid, res.model.exog)
assert_almost_equal(hbpk[0], het_breusch_pagan_konker[0], decimal=6)
assert_almost_equal(hbpk[1], het_breusch_pagan_konker[1], decimal=6)
hw = smsdia.het_white(res.resid, res.model.exog)
assert_almost_equal(hw[:2], het_white[:2], 6)
#arch
#sm_arch = smsdia.acorr_lm(res.resid**2, maxlag=4, autolag=None)
sm_arch = smsdia.het_arch(res.resid, maxlag=4)
assert_almost_equal(sm_arch[0], arch_4[0], decimal=5)
assert_almost_equal(sm_arch[1], arch_4[1], decimal=6)
vif2 = [oi.variance_inflation_factor(res.model.exog, k) for k in [1,2]]
infl = oi.OLSInfluence(res_ols)
#print np.max(np.abs(lev['DFFITS'] - infl.dffits[0]))
#print np.max(np.abs(lev['leverage'] - infl.hat_matrix_diag))
#print np.max(np.abs(lev['influence'] - infl.influence)) #just added this based on Gretl
#just rough test, low decimal in Gretl output,
assert_almost_equal(lev['residual'], res.resid, decimal=3)
assert_almost_equal(lev['DFFITS'], infl.dffits[0], decimal=3)
assert_almost_equal(lev['leverage'], infl.hat_matrix_diag, decimal=3)
assert_almost_equal(lev['influence'], infl.influence, decimal=4)
def test_all(self):
d = macrodata.load().data
#import datasetswsm.greene as g
#d = g.load('5-1')
#growth rates
gs_l_realinv = 400 * np.diff(np.log(d['realinv']))
gs_l_realgdp = 400 * np.diff(np.log(d['realgdp']))
#simple diff, not growthrate, I want heteroscedasticity later for testing
endogd = np.diff(d['realinv'])
exogd = add_constant(np.c_[np.diff(d['realgdp']), d['realint'][:-1]],
prepend=True)
endogg = gs_l_realinv
exogg = add_constant(np.c_[gs_l_realgdp, d['realint'][:-1]],prepend=True)
res_ols = OLS(endogg, exogg).fit()
#print res_ols.params
mod_g1 = GLSAR(endogg, exogg, rho=-0.108136)
res_g1 = mod_g1.fit()
#print res_g1.params
mod_g2 = GLSAR(endogg, exogg, rho=-0.108136) #-0.1335859) from R
res_g2 = mod_g2.iterative_fit(maxiter=5)
#print res_g2.params
rho = -0.108136
# coefficient std. error t-ratio p-value 95% CONFIDENCE INTERVAL
partable = np.array([
[-9.50990, 0.990456, -9.602, 3.65e-018, -11.4631, -7.55670], # ***
[ 4.37040, 0.208146, 21.00, 2.93e-052, 3.95993, 4.78086], # ***
[-0.579253, 0.268009, -2.161, 0.0319, -1.10777, -0.0507346]]) # **
#Statistics based on the rho-differenced data:
result_gretl_g1 = dict(
endog_mean = ("Mean dependent var", 3.113973),
endog_std = ("S.D. dependent var", 18.67447),
ssr = ("Sum squared resid", 22530.90),
mse_resid_sqrt = ("S.E. of regression", 10.66735),
rsquared = ("R-squared", 0.676973),
rsquared_adj = ("Adjusted R-squared", 0.673710),
fvalue = ("F(2, 198)", 221.0475),
f_pvalue = ("P-value(F)", 3.56e-51),
resid_acf1 = ("rho", -0.003481),
dw = ("Durbin-Watson", 1.993858))
#fstatistic, p-value, df1, df2
reset_2_3 = [5.219019, 0.00619, 2, 197, "f"]
reset_2 = [7.268492, 0.00762, 1, 198, "f"]
reset_3 = [5.248951, 0.023, 1, 198, "f"]
#LM-statistic, p-value, df
arch_4 = [7.30776, 0.120491, 4, "chi2"]
#multicollinearity
vif = [1.002, 1.002]
cond_1norm = 6862.0664
determinant = 1.0296049e+009
reciprocal_condition_number = 0.013819244
#Chi-square(2): test-statistic, pvalue, df
normality = [20.2792, 3.94837e-005, 2]
#tests
res = res_g1 #with rho from Gretl
#basic
assert_almost_equal(res.params, partable[:,0], 4)
assert_almost_equal(res.bse, partable[:,1], 6)
assert_almost_equal(res.tvalues, partable[:,2], 2)
assert_almost_equal(res.ssr, result_gretl_g1['ssr'][1], decimal=2)
#assert_almost_equal(res.llf, result_gretl_g1['llf'][1], decimal=7) #not in gretl
#assert_almost_equal(res.rsquared, result_gretl_g1['rsquared'][1], decimal=7) #FAIL
#assert_almost_equal(res.rsquared_adj, result_gretl_g1['rsquared_adj'][1], decimal=7) #FAIL
assert_almost_equal(np.sqrt(res.mse_resid), result_gretl_g1['mse_resid_sqrt'][1], decimal=5)
assert_almost_equal(res.fvalue, result_gretl_g1['fvalue'][1], decimal=4)
assert_approx_equal(res.f_pvalue, result_gretl_g1['f_pvalue'][1], significant=2)
#assert_almost_equal(res.durbin_watson, result_gretl_g1['dw'][1], decimal=7) #TODO
#arch
#sm_arch = smsdia.acorr_lm(res.wresid**2, maxlag=4, autolag=None)
sm_arch = smsdia.het_arch(res.wresid, maxlag=4)
assert_almost_equal(sm_arch[0], arch_4[0], decimal=4)
assert_almost_equal(sm_arch[1], arch_4[1], decimal=6)
#tests
res = res_g2 #with estimated rho
#estimated lag coefficient
assert_almost_equal(res.model.rho, rho, decimal=3)
#basic
assert_almost_equal(res.params, partable[:,0], 4)
assert_almost_equal(res.bse, partable[:,1], 3)
assert_almost_equal(res.tvalues, partable[:,2], 2)
assert_almost_equal(res.ssr, result_gretl_g1['ssr'][1], decimal=2)
#assert_almost_equal(res.llf, result_gretl_g1['llf'][1], decimal=7) #not in gretl
#assert_almost_equal(res.rsquared, result_gretl_g1['rsquared'][1], decimal=7) #FAIL
#assert_almost_equal(res.rsquared_adj, result_gretl_g1['rsquared_adj'][1], decimal=7) #FAIL
assert_almost_equal(np.sqrt(res.mse_resid), result_gretl_g1['mse_resid_sqrt'][1], decimal=5)
assert_almost_equal(res.fvalue, result_gretl_g1['fvalue'][1], decimal=0)
assert_almost_equal(res.f_pvalue, result_gretl_g1['f_pvalue'][1], decimal=6)
#assert_almost_equal(res.durbin_watson, result_gretl_g1['dw'][1], decimal=7) #TODO
c = oi.reset_ramsey(res, degree=2)
compare_ftest(c, reset_2, decimal=(2,4))
c = oi.reset_ramsey(res, degree=3)
compare_ftest(c, reset_2_3, decimal=(2,4))
#arch
#sm_arch = smsdia.acorr_lm(res.wresid**2, maxlag=4, autolag=None)
sm_arch = smsdia.het_arch(res.wresid, maxlag=4)
assert_almost_equal(sm_arch[0], arch_4[0], decimal=1)
assert_almost_equal(sm_arch[1], arch_4[1], decimal=2)
'''
Performing iterative calculation of rho...
ITER RHO ESS
1 -0.10734 22530.9
2 -0.10814 22530.9
Model 4: Cochrane-Orcutt, using observations 1959:3-2009:3 (T = 201)
Dependent variable: ds_l_realinv
rho = -0.108136
coefficient std. error t-ratio p-value
-------------------------------------------------------------
const -9.50990 0.990456 -9.602 3.65e-018 ***
ds_l_realgdp 4.37040 0.208146 21.00 2.93e-052 ***
realint_1 -0.579253 0.268009 -2.161 0.0319 **
Statistics based on the rho-differenced data:
Mean dependent var 3.113973 S.D. dependent var 18.67447
Sum squared resid 22530.90 S.E. of regression 10.66735
R-squared 0.676973 Adjusted R-squared 0.673710
F(2, 198) 221.0475 P-value(F) 3.56e-51
rho -0.003481 Durbin-Watson 1.993858
'''
'''
RESET test for specification (squares and cubes)
Test statistic: F = 5.219019,
with p-value = P(F(2,197) > 5.21902) = 0.00619
RESET test for specification (squares only)
Test statistic: F = 7.268492,
with p-value = P(F(1,198) > 7.26849) = 0.00762
RESET test for specification (cubes only)
Test statistic: F = 5.248951,
with p-value = P(F(1,198) > 5.24895) = 0.023:
'''
'''
Test for ARCH of order 4
coefficient std. error t-ratio p-value
--------------------------------------------------------
alpha(0) 97.0386 20.3234 4.775 3.56e-06 ***
alpha(1) 0.176114 0.0714698 2.464 0.0146 **
alpha(2) -0.0488339 0.0724981 -0.6736 0.5014
alpha(3) -0.0705413 0.0737058 -0.9571 0.3397
alpha(4) 0.0384531 0.0725763 0.5298 0.5968
Null hypothesis: no ARCH effect is present
Test statistic: LM = 7.30776
with p-value = P(Chi-square(4) > 7.30776) = 0.120491:
'''
'''
Variance Inflation Factors
Minimum possible value = 1.0
Values > 10.0 may indicate a collinearity problem
ds_l_realgdp 1.002
realint_1 1.002
VIF(j) = 1/(1 - R(j)^2), where R(j) is the multiple correlation coefficient
between variable j and the other independent variables
Properties of matrix X'X:
1-norm = 6862.0664
Determinant = 1.0296049e+009
Reciprocal condition number = 0.013819244
'''
'''
Test for ARCH of order 4 -
Null hypothesis: no ARCH effect is present
Test statistic: LM = 7.30776
with p-value = P(Chi-square(4) > 7.30776) = 0.120491
Test of common factor restriction -
Null hypothesis: restriction is acceptable
Test statistic: F(2, 195) = 0.426391
with p-value = P(F(2, 195) > 0.426391) = 0.653468
Test for normality of residual -
Null hypothesis: error is normally distributed
Test statistic: Chi-square(2) = 20.2792
with p-value = 3.94837e-005:
'''
#no idea what this is
'''
Augmented regression for common factor test
OLS, using observations 1959:3-2009:3 (T = 201)
Dependent variable: ds_l_realinv
coefficient std. error t-ratio p-value
---------------------------------------------------------------
const -10.9481 1.35807 -8.062 7.44e-014 ***
ds_l_realgdp 4.28893 0.229459 18.69 2.40e-045 ***
realint_1 -0.662644 0.334872 -1.979 0.0492 **
ds_l_realinv_1 -0.108892 0.0715042 -1.523 0.1294
ds_l_realgdp_1 0.660443 0.390372 1.692 0.0923 *
realint_2 0.0769695 0.341527 0.2254 0.8219
Sum of squared residuals = 22432.8
Test of common factor restriction
Test statistic: F(2, 195) = 0.426391, with p-value = 0.653468
'''
################ with OLS, HAC errors
#Model 5: OLS, using observations 1959:2-2009:3 (T = 202)
#Dependent variable: ds_l_realinv
#HAC standard errors, bandwidth 4 (Bartlett kernel)
#coefficient std. error t-ratio p-value 95% CONFIDENCE INTERVAL
#for confidence interval t(199, 0.025) = 1.972
partable = np.array([
[-9.48167, 1.17709, -8.055, 7.17e-014, -11.8029, -7.16049], # ***
[4.37422, 0.328787, 13.30, 2.62e-029, 3.72587, 5.02258], #***
[-0.613997, 0.293619, -2.091, 0.0378, -1.19300, -0.0349939]]) # **
result_gretl_g1 = dict(
endog_mean = ("Mean dependent var", 3.257395),
endog_std = ("S.D. dependent var", 18.73915),
ssr = ("Sum squared resid", 22799.68),
mse_resid_sqrt = ("S.E. of regression", 10.70380),
rsquared = ("R-squared", 0.676978),
rsquared_adj = ("Adjusted R-squared", 0.673731),
fvalue = ("F(2, 199)", 90.79971),
f_pvalue = ("P-value(F)", 9.53e-29),
llf = ("Log-likelihood", -763.9752),
aic = ("Akaike criterion", 1533.950),
bic = ("Schwarz criterion", 1543.875),
hqic = ("Hannan-Quinn", 1537.966),
resid_acf1 = ("rho", -0.107341),
dw = ("Durbin-Watson", 2.213805))
linear_logs = [1.68351, 0.430953, 2, "chi2"]
#for logs: dropping 70 nan or incomplete observations, T=133
#(res_ols.model.exog <=0).any(1).sum() = 69 ?not 70
linear_squares = [7.52477, 0.0232283, 2, "chi2"]
#Autocorrelation, Breusch-Godfrey test for autocorrelation up to order 4
lm_acorr4 = [1.17928, 0.321197, 4, 195, "F"]
lm2_acorr4 = [4.771043, 0.312, 4, "chi2"]
acorr_ljungbox4 = [5.23587, 0.264, 4, "chi2"]
#break
cusum_Harvey_Collier = [0.494432, 0.621549, 198, "t"] #stats.t.sf(0.494432, 198)*2
#see cusum results in files
break_qlr = [3.01985, 0.1, 3, 196, "maxF"] #TODO check this, max at 2001:4
break_chow = [13.1897, 0.00424384, 3, "chi2"] # break at 1984:1
arch_4 = [3.43473, 0.487871, 4, "chi2"]
normality = [23.962, 0.00001, 2, "chi2"]
het_white = [33.503723, 0.000003, 5, "chi2"]
het_breush_pagan = [1.302014, 0.521520, 2, "chi2"] #TODO: not available
het_breush_pagan_konker = [0.709924, 0.701200, 2, "chi2"]
reset_2_3 = [5.219019, 0.00619, 2, 197, "f"]
reset_2 = [7.268492, 0.00762, 1, 198, "f"]
reset_3 = [5.248951, 0.023, 1, 198, "f"] #not available
cond_1norm = 5984.0525
determinant = 7.1087467e+008
reciprocal_condition_number = 0.013826504
vif = [1.001, 1.001]
names = 'date residual leverage influence DFFITS'.split()
cur_dir = os.path.abspath(os.path.dirname(__file__))
fpath = os.path.join(cur_dir, 'results/leverage_influence_ols_nostars.txt')
lev = np.genfromtxt(fpath, skip_header=3, skip_footer=1,
converters={0:lambda s: s})
#either numpy 1.6 or python 3.2 changed behavior
if np.isnan(lev[-1]['f1']):
lev = np.genfromtxt(fpath, skip_header=3, skip_footer=2,
converters={0:lambda s: s})
lev.dtype.names = names
res = res_ols #for easier copying
cov_hac = sw.cov_hac_simple(res, nlags=4, use_correction=False)
bse_hac = sw.se_cov(cov_hac)
assert_almost_equal(res.params, partable[:,0], 5)
assert_almost_equal(bse_hac, partable[:,1], 5)
#TODO
assert_almost_equal(res.ssr, result_gretl_g1['ssr'][1], decimal=2)
#assert_almost_equal(res.llf, result_gretl_g1['llf'][1], decimal=7) #not in gretl
assert_almost_equal(res.rsquared, result_gretl_g1['rsquared'][1], decimal=6) #FAIL
assert_almost_equal(res.rsquared_adj, result_gretl_g1['rsquared_adj'][1], decimal=6) #FAIL
assert_almost_equal(np.sqrt(res.mse_resid), result_gretl_g1['mse_resid_sqrt'][1], decimal=5)
#f-value is based on cov_hac I guess
#assert_almost_equal(res.fvalue, result_gretl_g1['fvalue'][1], decimal=0) #FAIL
#assert_approx_equal(res.f_pvalue, result_gretl_g1['f_pvalue'][1], significant=1) #FAIL
#assert_almost_equal(res.durbin_watson, result_gretl_g1['dw'][1], decimal=7) #TODO
c = oi.reset_ramsey(res, degree=2)
compare_ftest(c, reset_2, decimal=(6,5))
c = oi.reset_ramsey(res, degree=3)
compare_ftest(c, reset_2_3, decimal=(6,5))
linear_sq = smsdia.linear_lm(res.resid, res.model.exog)
assert_almost_equal(linear_sq[0], linear_squares[0], decimal=6)
assert_almost_equal(linear_sq[1], linear_squares[1], decimal=7)
hbpk = smsdia.het_breushpagan(res.resid, res.model.exog)
assert_almost_equal(hbpk[0], het_breush_pagan_konker[0], decimal=6)
assert_almost_equal(hbpk[1], het_breush_pagan_konker[1], decimal=6)
hw = smsdia.het_white(res.resid, res.model.exog)
assert_almost_equal(hw[:2], het_white[:2], 6)
#arch
#sm_arch = smsdia.acorr_lm(res.resid**2, maxlag=4, autolag=None)
sm_arch = smsdia.het_arch(res.resid, maxlag=4)
assert_almost_equal(sm_arch[0], arch_4[0], decimal=5)
assert_almost_equal(sm_arch[1], arch_4[1], decimal=6)
vif2 = [oi.variance_inflation_factor(res.model.exog, k) for k in [1,2]]
infl = oi.OLSInfluence(res_ols)
#print np.max(np.abs(lev['DFFITS'] - infl.dffits[0]))
#print np.max(np.abs(lev['leverage'] - infl.hat_matrix_diag))
#print np.max(np.abs(lev['influence'] - infl.influence)) #just added this based on Gretl
#just rough test, low decimal in Gretl output,
assert_almost_equal(lev['residual'], res.resid, decimal=3)
assert_almost_equal(lev['DFFITS'], infl.dffits[0], decimal=3)
assert_almost_equal(lev['leverage'], infl.hat_matrix_diag, decimal=3)
assert_almost_equal(lev['influence'], infl.influence, decimal=4)
fig = plt.figure()
# ax = fig.add_subplot(3,1,1)
# plt.plot(andrew_results.weights, 'o', label='rlm weights')
# plt.legend(loc='lower left')
ax = fig.add_subplot(3, 1, 2)
plt.plot(cooks_d, 'o', label="Cook's distance")
plt.legend(loc='upper left')
ax2 = fig.add_subplot(3, 1, 3)
plt.plot(resid_studentized, 'o', label='studentized_resid')
plt.plot(dffits, 'o', label='DFFITS')
leg = plt.legend(loc='lower left', fancybox=True)
leg.get_frame().set_alpha(0.5) #, fontsize='small')
ltext = leg.get_texts() # all the text.Text instance in the legend
plt.setp(ltext, fontsize='small') # the legend text fontsize
print(oi.reset_ramsey(res, degree=3))
#note, constant in last column
for i in range(1):
print(oi.variance_inflation_factor(res.model.exog, i))
infl = oi.OLSInfluence(res_ols)
print(infl.resid_studentized_external)
print(infl.resid_studentized_internal)
print(infl.summary_table())
print(oi.summary_table(res, alpha=0.05)[0])
'''
>>> res.resid
array([ 4.28571429, 4. , 0.57142857, -3.64285714,
-4.71428571, 1.92857143, 10. , -6.35714286,
-11. , -1.42857143, 1.71428571, 4.64285714])
fig = plt.figure()
# ax = fig.add_subplot(3,1,1)
# plt.plot(andrew_results.weights, 'o', label='rlm weights')
# plt.legend(loc='lower left')
ax = fig.add_subplot(3, 1, 2)
plt.plot(cooks_d, 'o', label="Cook's distance")
plt.legend(loc='upper left')
ax2 = fig.add_subplot(3, 1, 3)
plt.plot(resid_studentized, 'o', label='studentized_resid')
plt.plot(dffits, 'o', label='DFFITS')
leg = plt.legend(loc='lower left', fancybox=True)
leg.get_frame().set_alpha(0.5) #, fontsize='small')
ltext = leg.get_texts() # all the text.Text instance in the legend
plt.setp(ltext, fontsize='small') # the legend text fontsize
print oi.reset_ramsey(res, degree=3)
#note, constant in last column
for i in range(1):
print oi.variance_inflation_factor(res.model.exog, i)
infl = oi.OLSInfluence(res_ols)
print infl.resid_studentized_external
print infl.resid_studentized_internal
print infl.summary_table()
print oi.summary_table(res, alpha=0.05)[0]
'''
>>> res.resid
array([ 4.28571429, 4. , 0.57142857, -3.64285714,
-4.71428571, 1.92857143, 10. , -6.35714286,
-11. , -1.42857143, 1.71428571, 4.64285714])
# ax = fig.add_subplot(3,1,1)
# plt.plot(andrew_results.weights, 'o', label='rlm weights')
# plt.legend(loc='lower left')
ax = fig.add_subplot(3,1,2)
plt.plot(cooks_d, 'o', label="Cook's distance")
plt.legend(loc='upper left')
ax2 = fig.add_subplot(3,1,3)
plt.plot(resid_studentized, 'o', label='studentized_resid')
plt.plot(dffits, 'o', label='DFFITS')
leg = plt.legend(loc='lower left', fancybox=True)
leg.get_frame().set_alpha(0.5) #, fontsize='small')
ltext = leg.get_texts() # all the text.Text instance in the legend
plt.setp(ltext, fontsize='small') # the legend text fontsize
print oi.reset_ramsey(res, degree=3)
#note, constant in last column
for i in range(1):
print oi.variance_inflation_factor(res.model.exog, i)
infl = oi.OLSInfluence(res_ols)
print infl.resid_studentized_external
print infl.resid_studentized_internal
print infl.summary_table()
print oi.summary_table(res, alpha=0.05)[0]
'''
>>> res.resid
array([ 4.28571429, 4. , 0.57142857, -3.64285714,
-4.71428571, 1.92857143, 10. , -6.35714286,
fig = plt.figure()
# ax = fig.add_subplot(3,1,1)
# plt.plot(andrew_results.weights, 'o', label='rlm weights')
# plt.legend(loc='lower left')
ax = fig.add_subplot(3, 1, 2)
plt.plot(cooks_d, "o", label="Cook's distance")
plt.legend(loc="upper left")
ax2 = fig.add_subplot(3, 1, 3)
plt.plot(resid_studentized, "o", label="studentized_resid")
plt.plot(dffits, "o", label="DFFITS")
leg = plt.legend(loc="lower left", fancybox=True)
leg.get_frame().set_alpha(0.5) # , fontsize='small')
ltext = leg.get_texts() # all the text.Text instance in the legend
plt.setp(ltext, fontsize="small") # the legend text fontsize
print(oi.reset_ramsey(res, degree=3))
# note, constant in last column
for i in range(1):
print(oi.variance_inflation_factor(res.model.exog, i))
infl = oi.OLSInfluence(res_ols)
print(infl.resid_studentized_external)
print(infl.resid_studentized_internal)
print(infl.summary_table())
print(oi.summary_table(res, alpha=0.05)[0])
"""
>>> res.resid
array([ 4.28571429, 4. , 0.57142857, -3.64285714,
-4.71428571, 1.92857143, 10. , -6.35714286,
def test_reset_stata():
mod = OLS(data.violent, add_constant(data[['murder', 'hs_grad']]))
res = mod.fit()
stat = reset_ramsey(res, degree=4)
assert_almost_equal(stat.fvalue[0, 0], 1.52, decimal=2)
assert_almost_equal(stat.pvalue, 0.2221, decimal=4)
def ramsey_RESET_test(data, target, features, degree, plot_on=False):
'''
Perform a ramsey RESET test using statsmodels.stats.outliers_influence
Parameters:
data - pandas dataframe
target - target variable name
features - features to test
plot - flag to plot or not
Returns
oi.reset_ramsey(ols_model) result, which is a statsmodels.stats.contrast.ContrastResults
Code ref: http://nullege.com/codes/show/src%40s%40t%40statsmodels-HEAD%40statsmodels%40examples%40ex_outliers_influence.py/95/statsmodels.stats.outliers_influence.reset_ramsey/python
Other refs:
https://github.com/statsmodels/statsmodels/blob/master/statsmodels/stats/outliers_influence.py
https://programtalk.com/python-examples/statsmodels.stats.outliers_influence.reset_ramsey/
'''
endog = data[target]
exog = sm.add_constant(data[features])
res_ols = sm.OLS(endog, exog).fit()
hh = (res_ols.model.exog * res_ols.model.pinv_wexog.T).sum(1)
x = res_ols.model.exog
hh_check = np.diag(
np.dot(x, np.dot(res_ols.model.normalized_cov_params, x.T)))
assert_almost_equal(hh, hh_check, decimal=13)
res = res_ols # alias
# http://en.wikipedia.org/wiki/PRESS_statistic
# predicted residuals, leave one out predicted residuals
resid_press = res.resid / (1 - hh)
ess_press = np.dot(resid_press, resid_press)
sigma2_est = np.sqrt(
res.mse_resid) # can be replace by different estimators of sigma
sigma_est = np.sqrt(sigma2_est)
resid_studentized = res.resid / sigma_est / np.sqrt(1 - hh)
# http://en.wikipedia.org/wiki/DFFITS:
dffits = resid_studentized * np.sqrt(hh / (1 - hh))
nobs, k_vars = res.model.exog.shape
# Belsley, Kuh and Welsch (1980) suggest a threshold for abs(DFFITS)
dffits_threshold = 2 * np.sqrt(k_vars / nobs)
res_ols.df_modelwc = res_ols.df_model + 1
n_params = res.model.exog.shape[1]
# http://en.wikipedia.org/wiki/Cook%27s_distance
cooks_d = res.resid**2 / sigma2_est / res_ols.df_modelwc * hh / (1 - hh)**2
# or
# Eubank p.93, 94
cooks_d2 = resid_studentized**2 / res_ols.df_modelwc * hh / (1 - hh)
# threshold if normal, also Wikipedia
alpha = 0.1
# df looks wrong
# print('scipy inverse survival function 1-alpha:', stats.f.isf(1-alpha, n_params, res.df_resid))
# print('scipy survival function cooks_d', stats.f.sf(cooks_d, n_params, res.df_resid))
#
# print('Cooks Distance:')
# print(cooks_d)
# print(cooks_d2)
if plot_on:
import matplotlib.pyplot as plt
fig = plt.figure(figsize=(15, 15))
ax = fig.add_subplot(3, 1, 2)
plt.plot(cooks_d, 'o', label="Cook's distance")
plt.legend(loc='upper left')
ax2 = fig.add_subplot(3, 1, 3)
plt.plot(resid_studentized, 'o', label='studentized_resid')
plt.plot(dffits, 'o', label='DFFITS')
leg = plt.legend(loc='lower left', fancybox=True)
leg.get_frame().set_alpha(0.5) # , fontsize='small')
ltext = leg.get_texts() # all the text.Text instance in the legend
plt.setp(ltext, fontsize='small') # the legend text fontsize
rr_res = oi.reset_ramsey(res, degree=degree)
# print('oi.reset_ramsey:', rr_res)
# infl = oi.OLSInfluence(res_ols)
# print(infl.resid_studentized_external)
# print(infl.resid_studentized_internal)
# print(infl.summary_table())
# print(oi.summary_table(res, alpha=0.05)[0])
return rr_res