def getProgram_Title(scope={}):
print "Looking for title"
stbt.press("KEY_INFO")
stbt.wait_until(lambda: infobanner.Infobanner())
sleep(2)
current_selection_text = stbt.ocr(
region=stbt.Region(x=317, y=633, right=838, bottom=683),
mode=stbt.OcrMode.SINGLE_LINE,
lang='nld',
# tesseract_config={'load_system_dawg':False, 'load_freq_dawg':False},
)
return {"programTitle": current_selection_text}
def check_for_recording_icon(icon, scope={}, validate=True):
status = False
dismissPopupIfPresent()
coordinates = getCoordinatesOfIcon(icon)
image = coordinates['image']
x = coordinates['x']
y = coordinates['y']
right = coordinates['right']
bottom = coordinates['bottom']
imageRegion = stbt.Region(x, y, right, bottom)
try:
if (stbt.wait_for_match(image, region=stbt.Region(x, y, right,
bottom))):
print "Icon present on screen"
status = True
else:
print "Icon not present on screen"
status = False
except Exception, e:
print e
print "Exception thrown"
def test_match_all_with_an_image_that_matches_everywhere(match_method):
matches = sorted(m.region for m in stbt.match_all(
"repeating-pattern.png",
frame=stbt.load_image("repeating-pattern-full-frame.png"),
match_parameters=mp(match_method=match_method)))
expected_matches = sorted([
stbt.Region(x, y, width=16, height=16) for x in range(0, 320, 16)
for y in range(0, 240, 16)
])
print(matches)
assert matches == expected_matches
def test_transparent_reference_image_with_hard_edge():
# This is a regression test for a bug in the pyramid optimisation when
# the reference image has a very small number of pixels, or the only non-
# transparent pixels are near the edges of reference image:
# At the smaller pyramid levels, the pixels near the edge of the reference
# image won't match exactly because the corresponding pixels in the
# down-scaled frame have been blurred. We also blur the reference image
# before down-scaling, but since it doesn't know what's outside its edges,
# it won't have the blurring near the edge.
frame = stbt.load_image("images/regression/roku-tile-frame.png")
m = stbt.match("images/regression/roku-tile-selection.png", frame=frame)
assert m
assert stbt.Region(x=325, y=145, right=545, bottom=325).contains(m.region)
def test_that_results_dont_overlap(match_method):
# This is a regression test for a bug seen in an earlier implementation of
# `match_all`.
frame = stbt.load_image("action-panel.png")
all_matches = set()
for m in stbt.match_all("action-panel-template.png",
frame=frame,
match_parameters=mp(match_method=match_method)):
print(m)
assert m.region not in all_matches, "Match %s already seen:\n %s" % (
m, "\n ".join(str(x) for x in all_matches))
assert all(
stbt.Region.intersect(m.region, x) is None for x in all_matches)
all_matches.add(m.region)
assert all_matches == set([
stbt.Region(x=135, y=433, width=222, height=40),
stbt.Region(x=135, y=477, width=222, height=40),
stbt.Region(x=135, y=521, width=222, height=40),
stbt.Region(x=135, y=565, width=222, height=40),
stbt.Region(x=135, y=609, width=222, height=40)
])
def testTvNaziemnej(self):
self.testsResults["terrestrial_siganl_level"] = []
self.testsResults["terrestrial_siganl_quality"] = []
stbt.press("KEY_DOWN", Test.timeBeforePress)
stbt.press("KEY_DOWN", Test.timeBeforePress)
stbt.press("KEY_OK", Test.timeBeforePress)
stbt.press("KEY_RIGHT", Test.timeBeforePress)
channel_numbers = ["25", "55", "58"]
for number in channel_numbers:
Test.myPressUntilMatchText(
number, "KEY_DOWN", stbt.Region(624, 399, width=37, height=26),
30)
signalLevel = stbt.ocr(None,
stbt.Region(514, 434, width=56, height=30),
stbt.OcrMode.PAGE_SEGMENTATION_WITHOUT_OSD)
sl = signalLevel[:-1]
i = int(sl)
print("Odczytana sila sygnalu: ", i)
if i < self.minSignalLevel:
self.testsResults["terrestrial_siganl_level"][
channel_numbers.index(number)] = False
else:
self.testsResults["terrestrial_siganl_level"][
channel_numbers.index(number)] = True
signalQuality = stbt.ocr(
None, stbt.Region(514, 601, width=56, height=30),
stbt.OcrMode.PAGE_SEGMENTATION_WITHOUT_OSD)
sq = signalQuality[:-1]
j = int(sq)
print("Odczytana jakosc sygnalu: ", j)
if j < self.minSignalQuality:
self.testsResults["terrestrial_siganl_quality"][
channel_numbers.index(number)] = False
else:
self.testsResults["terrestrial_siganl_quality"][
channel_numbers.index(number)] = True
stbt.press("KEY_BACK", Test.timeBeforePress)
stbt.press("KEY_BACK", Test.timeBeforePress)
def analyse_colours_video(number=None):
"""RGB!"""
errors_in_a_row = 0
n = 0
for frame, _ in stbt.frames():
if number is not None and n >= number:
return
colour_hex = ''
n = n + 1
def read_hex(region, frame_=frame):
return stbt.ocr(
frame_, region, stbt.OcrMode.SINGLE_LINE, tesseract_config={
'tessedit_char_whitelist': '#0123456789abcdef'},
tesseract_user_patterns=['#\n\n\n\n\n\n']).replace(' ', '')
# The colour is written above and below the rectangle because we want
# to be sure that the top of the colour box is from the same frame as
# the bottom.
colour_hex = read_hex(stbt.Region(490, 100, 300, 70))
colour_hex_bottom = read_hex(stbt.Region(490, 550, 300, 70))
if (len(colour_hex) >= 7 and colour_hex[0] == '#' and
all(c in string.hexdigits for c in colour_hex[1:7]) and
colour_hex == colour_hex_bottom):
desired = numpy.array((
int(colour_hex[1:3], 16),
int(colour_hex[3:5], 16),
int(colour_hex[5:7], 16)))
colour = cv2.mean(frame[240:480, 520:760])
colour = (colour[2], colour[1], colour[0])
yield (n, desired, colour)
errors_in_a_row = 0
else:
errors_in_a_row += 1
if errors_in_a_row > 50:
raise RuntimeError(
"Failed to find hexidecimal colour description")
def selection(self):
settings_options = self.settings_options
current_selection_text = stbt.ocr(
frame=self._frame,
region=stbt.Region(x=360, y=383, right=885, bottom=420),
mode=stbt.OcrMode.SINGLE_LINE,
lang='nld',
# tesseract_config={'load_system_dawg':False, 'load_freq_dawg':False},
tesseract_user_words=settings_options)
for item in settings_options:
print "settings option read as '%s'" % current_selection_text
if ocr_utils.fuzzy_match(current_selection_text, item, 0.78):
return item
def sprawdzSileIJakosSygnalu(self):
signalLevel = stbt.ocr(None, stbt.Region(1119,
436,
width=53,
height=36),
stbt.OcrMode.PAGE_SEGMENTATION_WITHOUT_OSD)
sl = signalLevel[:-1]
i = int(sl)
print("Odczytana sila sygnalu: ", i)
if i < self.minSignalLevel:
self.testsResults["siganl_level"] = False
return
signalQuality = stbt.ocr(None,
stbt.Region(1116, 488, width=54, height=28),
stbt.OcrMode.PAGE_SEGMENTATION_WITHOUT_OSD)
sq = signalQuality[:-1]
j = int(sq)
print("Odczytana jakosc sygnalu: ", j)
if j < self.minSignalQuality:
self.testsResults["signal_quality"] = False
return
self.testsResults["signal_level"] = True
self.testsResults["singal_quality"] = True
def message(self):
"""
This property demonstrates an advantage of Frame Objects over
stand-alone helper functions. We are using the position of the "info"
icon to find this message. Because the private ``_info`` property is
shared between this property and ``is_visible`` we don't need to
compute it twice -- the ``FrameObject`` base class will remember the
value from the first time it was computed.
"""
right_of_info = stbt.Region(
x=self._info.region.right, y=self._info.region.y,
width=390, height=self._info.region.height)
return stbt.ocr(region=right_of_info, frame=self._frame) \
.replace('\n', ' ')
def test_match_error_message_for_too_small_frame_and_region():
stbt.match("videotestsrc-redblue.png", frame=black(width=92, height=160))
stbt.match("videotestsrc-redblue.png",
frame=black(),
region=stbt.Region(x=1188, y=560, width=92, height=160))
with pytest.raises(ValueError) as excinfo:
stbt.match("videotestsrc-redblue.png",
frame=black(width=91, height=160))
assert (
"Frame (160, 91, 3) must be larger than reference image (160, 92, 3)"
in str(excinfo.value))
with pytest.raises(ValueError) as excinfo:
stbt.match("videotestsrc-redblue.png",
frame=black(width=92, height=159))
assert (
"Frame (159, 92, 3) must be larger than reference image (160, 92, 3)"
in str(excinfo.value))
with pytest.raises(ValueError) as excinfo:
# Region seems large enough but actually it extends beyond the frame
stbt.match("videotestsrc-redblue.png",
frame=black(),
region=stbt.Region(x=1189, y=560, width=92, height=160))
assert (
"Region(x=1189, y=560, right=1280, bottom=720) must be larger than "
"reference image (160, 92, 3)" in str(excinfo.value))
with pytest.raises(ValueError) as excinfo:
# Region seems large enough but actually it extends beyond the frame
stbt.match("videotestsrc-redblue.png",
frame=black(),
region=stbt.Region(x=1188, y=561, width=92, height=160))
assert (
"Region(x=1188, y=561, right=1280, bottom=720) must be larger than "
"reference image (160, 92, 3)" in str(excinfo.value))
def ustawieniaFabryczne():
wejdzWUstawienia()
myPressUntilMatchText(
"FABRYCZNE", "KEY_DOWN", stbt.Region(507, 339, width=182, height=36),
maxPressesInDiagnosticsMenu
) # sztuczka polegajaca na tym, ze slowo "FABRYCZNE" zmienia swoja pozcje na ekranie gdy opcja "USTAWIENIA FABRYCZNE" jest zaznaczona
stbt.press("KEY_OK", timeBeforePress)
stbt.press("KEY_OK", timeBeforePress)
stbt.press("KEY_1", timeBeforePress)
stbt.press("KEY_2", timeBeforePress)
stbt.press("KEY_5", timeBeforePress)
stbt.press("KEY_7", timeBeforePress)
stbt.press("KEY_INFO", timeBeforePress)
stbt.press("KEY_OK", timeBeforePress)
stbt.press("KEY_OK", timeBeforePress)
def channelSwitchDetection(channelToCompare, maxAttempts=10):
result = [0, 0]
stbt.wait_for_match(
"images/t1/up_arrow_image.png") # oczekiwanie na wcisnienie przycisku
channelNumber = stbt.ocr(None, stbt.Region(90, 592, width=45, height=41),
stbt.OcrMode.PAGE_SEGMENTATION_WITHOUT_OSD)
cn = int(channelNumber)
result[1] = cn
if cn < channelToCompare:
result[0] = 1
elif cn > channelToCompare:
result[0] = 2
else:
result[0] = -1
return result
def selection(self):
hub_items = self.hub_items
current_selection_text = stbt.ocr(
frame=self._frame,
region=stbt.Region(x=360, y=520, right=640, bottom=570),
mode=stbt.OcrMode.SINGLE_LINE,
lang='nld',
# tesseract_config={'load_system_dawg':False, 'load_freq_dawg':False},
tesseract_user_words=hub_items)
for item in hub_items:
print "Main hub item read as '%s'" % current_selection_text
if tests.steps.ocr_utils.fuzzy_match(current_selection_text, item,
0.78):
return item
def program_title(self):
"""Gets the program title property"""
text = stbt.ocr(
frame=self._frame,
region=stbt.Region(x=120, y=540, right=880, bottom=590),
text_color=(255, 255, 255))
# OCR is a little unreliable at reading " S01 E23" at the end of a
# title. It sometimes mistakes an "S" for a "5" and vice-versa. We
# fix this up here:
def fix_series_episode(m):
s, e = m.groups()
return " S%s E%s" % (s.replace("S", "5"), e.replace("S", "5"))
return re.sub(r"\s[S5]([0-9S]+)\sE([0-9S]+)$", fix_series_episode, text)
def get_text(self, region):
try:
txt_region = stbt.Region(region["x"],
region["y"],
width=region["width"],
height=region["height"])
ocr_txt = stbt.ocr(region=txt_region)
ocr_txt = ocr_txt.strip()
self.LogResults.info("Captured Text : {}".format(
ocr_txt.encode("utf-8")))
except:
self.LogResults.error("Text {} - Found".format(
traceback.format_exc()))
ocr_txt = None
return ocr_txt.encode("utf-8")
def test_merge_regions_performance(n):
random.seed(1)
regions = []
for _ in range(n):
x = random.randint(0, 1280)
y = random.randint(0, 720)
right = random.randint(0, 1280)
bottom = random.randint(0, 720)
x, w = min(x, right), max(x, right) - min(x, right) + 1
y, h = min(y, bottom), max(y, bottom) - min(y, bottom) + 1
regions.append(stbt.Region(x, y, w, h))
times = timeit.repeat(lambda: _merge_regions(regions[:]),
number=1, repeat=10)
print(times)
print(min(times))
assert min(times) < (0.001 * n / 20)
def pierwszaInstalacja(self):
try:
stbt.wait_for_match("sciezka do obrazka lista kanalow", 60)
except stbt.MatchTimeout:
self.testsResults["power"] = False
return
self.testsResults["power"] = True
try:
stbt.wait_for_match(
"sciezka do obrazka aktualizacja oprogramowania", 60)
except stbt.MatchTimeout:
self.testsResults["signal_level_1"] = False
self.testsResults["signal_quality_1"] = False
return
try:
stbt.wait_for_match(
"sciezka do obrazka przycisku aktualizacja oprogramowania", 30,
stbt.Region(260, 200, width=690, height=340))
except stbt.MatchTimeout:
try:
stbt.wait_for_match(
"obrazek ptaszek(zaznaczenie - ethernet)", 20,
stbt.Region(260, 200, width=690, height=340))
except:
stbt.press("KEY_UP", Test.timeBeforePress)
stbt.press("KEY_OK", Test.timeBeforePress)
stbt.press("KEY_OK", Test.timeBeforePress)
try:
stbt.wait_for_match("sciezka do obrazka odbierasz(aktywacja)",
30,
stbt.Region(905, 450, width=35, height=30))
except MatchTimeout:
self.sprawdzSileIJakosSygnalu(
1, stbt.Region(730, 365, width=65, height=25),
stbt.Region(730, 405, width=65, height=25))
if self.model == "3740SX":
self.sprawdzSileIJakosSygnalu(
2, stbt.Region(730, 495, width=65, height=25),
stbt.Region(730, 535, width=65, height=25))
return
try:
stbt.wait_for_motion(30)
except MotionTimeout:
self.activationCode()
else:
stbt.press("KEY_OK", Test.timeBeforePress)
self.uruchomienieDekodera()
def check_icon_on_screen(icon, scope={}, validate=True):
coordinates = getCoordinatesOfIcon(icon)
status = False
try:
if (stbt.wait_for_match(coordinates['image'],
region=stbt.Region(
x=coordinates['x'],
y=coordinates['y'],
right=coordinates['right'],
bottom=coordinates['bottom']))):
print "Icon present on screen"
status = True
else:
print "Icon not present on screen"
status = False
except Exception, e:
print e
print "Exception thrown"
def remote_control_press_until_image_match(self,
key,
image_to_find,
region=None,
maximum_key_press=5):
if region is not None:
img_region = stbt.Region(region["x"],
region["y"],
width=region["width"],
height=region["height"])
return stbt.press_until_match(key,
image_to_find,
max_presses=maximum_key_press,
region=img_region)
else:
return stbt.press_until_match(key,
image_to_find,
max_presses=maximum_key_press)
def sprawdzTimeshifting(self):
stbt.press("KEY_PAUSE", Test.timeBeforePress)
try:
stbt.wait_for_motion(timeout_sec=3,
region=stbt.Region(10,
100,
width=1200,
height=400))
except MotionTimeout:
stbt.press("KEY_PLAY", Test.timeBeforePress)
try:
stbt.wait_for_motion()
except MotionTimeout:
self.testsResults["timeshifting"] = False
else:
self.testsResults["timeshifting"] = True
else:
self.testsResults["timeshifting"] = False
stbt.press("KEY_STOP", Test.timeBeforePress)
def test_is_screen_black_debug():
# So that the output directory name doesn't depend on how many tests
# were run before this one.
ImageLogger._frame_number = itertools.count(1) # pylint:disable=protected-access
f = stbt.load_image("videotestsrc-full-frame.png")
with scoped_curdir(), scoped_debug_level(2):
stbt.is_screen_black(f)
stbt.is_screen_black(f, mask="videotestsrc-mask-non-black.png")
stbt.is_screen_black(f, mask="videotestsrc-mask-no-video.png")
stbt.is_screen_black(f, region=stbt.Region(0, 0, 160, 120))
files = subprocess.check_output("find stbt-debug | sort", shell=True) \
.decode("utf-8")
assert files == dedent("""\
stbt-debug
stbt-debug/00001
stbt-debug/00001/grey.png
stbt-debug/00001/index.html
stbt-debug/00001/non_black.png
stbt-debug/00001/source.png
stbt-debug/00002
stbt-debug/00002/grey.png
stbt-debug/00002/index.html
stbt-debug/00002/mask.png
stbt-debug/00002/non_black.png
stbt-debug/00002/source.png
stbt-debug/00003
stbt-debug/00003/grey.png
stbt-debug/00003/index.html
stbt-debug/00003/mask.png
stbt-debug/00003/non_black.png
stbt-debug/00003/source.png
stbt-debug/00004
stbt-debug/00004/grey.png
stbt-debug/00004/index.html
stbt-debug/00004/non_black.png
stbt-debug/00004/source.png
""")
assert_expected("stbt-debug-expected-output/is_screen_black")
def navigate_to_stoprecordingconfirmationoption(optionName):
optionName = _(optionName)
print "Looking for stop recording confirmation option '%s'" % optionName
for _ in range(2):
current_selection_text = stbt.ocr(
region=stbt.Region(x=392, y=550, right=610, bottom=595),
mode=stbt.OcrMode.SINGLE_LINE,
lang='nld',
# tesseract_config={'load_system_dawg':False, 'load_freq_dawg':False},
)
print "stop recording confirmation option read as '%s'" % current_selection_text
if ocr_utils.fuzzy_match(current_selection_text, optionName, 0.78):
sleep(2)
return {"status": True}
stbt.press("KEY_DOWN")
sleep(4)
else:
assert False, "Failed to find '%s' after pressing DOWN 2 times" % optionName
def check_motion(self):
"""
Detects if there is any motion in full screen
Asserts if blackscreen is still seen after <timeout>
:return:
"""
# import tests.core.bitmap
# for motionresult in stbt.detect_motion(timeout_secs=float(profile['MOTION_IMAGE_TIMEOUT']),
# mask=tests.core.bitmap.get_bitmap(self, "VideoMovementMaskCropped.png"),
# region=stbt.Region(x=127, y=71, width=1024, height=576)):
# if motionresult.motion:
# stbt.draw_text('Action : Fullscreen TV motion detected')
# break
# assert False, stbt.draw_text('Action : Motion TIMEOUT reached, %s seconds',
# timeout=profile["MOTION_IMAGE_TIMEOUT"])
return bool(stbt.detect_motion(timeout_secs=float(profile['MOTION_IMAGE_TIMEOUT']),
mask=tests.core.bitmap.get_bitmap(self, "VideoMovementMaskCropped.png"),
region=stbt.Region(x=127, y=71, width=1024, height=576)))
def test_region_replace():
from nose.tools import raises
r = stbt.Region(x=10, y=20, width=20, height=30)
def t(kwargs, expected):
assert r.replace(**kwargs) == expected
@raises(ValueError)
def e(kwargs):
r.replace(**kwargs)
# No change
yield t, dict(x=10), r
yield t, dict(x=10, width=20), r
yield t, dict(x=10, right=30), r
# Not allowed
yield e, dict(x=1, width=2, right=3)
yield e, dict(y=1, height=2, bottom=3)
# Allowed # pylint:disable=line-too-long
yield t, dict(x=11), stbt.Region(x=11, y=r.y, width=19, height=r.height)
yield t, dict(width=19), stbt.Region(x=10,
y=r.y,
width=19,
height=r.height)
yield t, dict(right=29), stbt.Region(x=10,
y=r.y,
width=19,
height=r.height)
yield t, dict(x=11, width=20), stbt.Region(x=11,
y=r.y,
width=20,
height=r.height)
yield t, dict(x=11, right=21), stbt.Region(x=11,
y=r.y,
width=10,
height=r.height)
yield t, dict(x=11, right=21, y=0, height=5), stbt.Region(x=11,
y=0,
width=10,
height=5)
def verify_recording_present(scope={}, validate=True):
status = False
programTitle = scope['programTitle']
recording_program_title = stbt.ocr(
region=stbt.Region(x=595, y=277, right=938, bottom=312),
mode=stbt.OcrMode.SINGLE_LINE,
lang='nld',
# tesseract_config={'load_system_dawg':False, 'load_freq_dawg':False},
)
print("rec title" + str(recording_program_title))
if ocr_utils.fuzzy_match(recording_program_title, programTitle, 0.78):
print "Recording Present"
status = True
else:
print "Recording is not available"
status = False
if validate:
if status == False:
assert "Icon not present on screen"
else:
return {"recordingfound": status}
def progress_bar_progress(self):
"""A percentage (a float between 0.0 and 1.0) of the progress bar
position.
"""
r = stbt.Region(x=120, y=615, right=1160, bottom=640)
m = stbt.match(tests.core.bitmap.get_bitmap(self, "ProgressBarRed.png"), frame=self._frame, region=r)
if m:
x = m.region.right
else:
# If the program has just started, it won't have matched
# "progress-bar-red.png". Let's try a reference image with the
# circle (the position indicator) at the left edge:
m = stbt.match(tests.core.bitmap.get_bitmap(self, "ProgressBarWhite.png"), frame=self._frame, region=r)
# m = stbt.match("ProgressBarWhite.png", frame=self._frame,
# region=r)
if m:
x = m.region.x
else:
# Progress bar not visible
return None
return (x - r.x) / r.width
def testFunkcjonalny(self):
self.testCzytnikaKarty()
self.sprawdzUSB()
if testsResults["usb"]:
stbt.press("KEY_BACK", self.timeBeforePress)
time.sleep(self.sleepTimeAfterUSBCheck)
wejdzWUstawienia()
stbt.press("KEY_DOWN", self.timeBeforePress)
stbt.press("KEY_OK", self.timeBeforePress)
time.sleep(self.sleepTimeBeforeOCR)
self.sprawdzSN(input("Podaj SN dekodera: "))
self.sprawdzWersjeOprogramowania()
self.sprawdzSileIJakosSygnalu()
stbt.press("KEY_BACK", self.timeBeforePress)
stbt.press("KEY_DOWN", self.timeBeforePress)
stbt.press("KEY_DOWN", self.timeBeforePress)
stbt.press("KEY_OK", self.timeBeforePress)
time.sleep(self.sleepTimeBeforeOCR)
self.sprawdzSiec()
if testsResults["ethernet"]:
stbt.press("KEY_BACK", self.timeBeforePress)
stbt.press("KEY_BACK", self.timeBeforePress)
stbt.press("KEY_BACK", self.timeBeforePress)
stbt.press("KEY_BACK", self.timeBeforePress)
stbt.press("KEY_LEFT", self.timeBeforePress)
stbt.press("KEY_OK", self.timeBeforePress)
sprawdzWiadomosci()
stbt.press("KEY_BACK", self.timeBeforePress)
myPressUntilMatchText("TV RACHUNEK", "KEY_RIGHT",
stbt.Region(515, 599, width=242, height=54))
stbt.press("KEY_OK", self.timeBeforePress)
self.sprawdzRachunki()
stbt.press("KEY_BACK", self.timeBeforePress)
stbt.press("KEY_BACK", self.timeBeforePress)
self.testWyswietlacza()
time.sleep(sleepTimeAfterDisplayCheck)
self.testKanalow()
self.testKlawiszy()
def testWygrzewanie(self):
self.uruchomienieDekodera()
#stbt.wait_for_match("obrazek po przejsciu aktywacji")
self.ustawieniaFabryczne()
stbt.mach_text("ANTENA TELEWIZJI NAZIEMNEJ", None,
stbt.Region(410, 162, width=460, height=30))
stbt.press("KEY_RIGHT", Test.timeBeforePress)
stbt.press("KEY_OK", Test.timeBeforePress)
stbt.press("KEY_SETUP", Test.timeBeforePress)
stbt.press("KEY_RIGHT", Test.timeBeforePress)
self.TestADB.sprawdzRachunki()
stbt.press("KEY_BACK", Test.timeBeforePress)
stbt.press("KEY_LEFT", Test.timeBeforePress)
stbt.press("KEY_LEFT", Test.timeBeforePress)
self.TestADB.sprawdzWiadomosci()
stbt.press("KEY_BACK", Test.timeBeforePress)
stbt.press("KEY_LEFT", Test.timeBeforePress)
stbt.press("KEY_LEFT", Test.timeBeforePress)
stbt.press("KEY_DOWN", Test.timeBeforePress)
stbt.press("KEY_OK", Test.timeBeforePress)
self.TestADB.testParowaniaKarty()
stbt.press("KEY_BACK", Test.timeBeforePress)
stbt.press("KEY_BACK", Test.timeBeforePress)
def test_that_match_converts_greyscale_reference_image(filename):
stbt.match(filename, frame=black()) # Doesn't raise
stbt.match(stbt.load_image(filename), frame=black())
@pytest.mark.parametrize("match_method", [
stbt.MatchMethod.SQDIFF,
stbt.MatchMethod.SQDIFF_NORMED,
])
def test_that_if_image_doesnt_match_match_all_returns_empty_array(match_method):
assert [] == list(stbt.match_all(
'button.png', frame=stbt.load_image('black-full-frame.png'),
match_parameters=mp(match_method=match_method)))
plain_buttons = [stbt.Region(_x, _y, width=135, height=44) for _x, _y in [
(28, 1), (163, 1), (177, 75), (177, 119), (177, 163), (298, 1)]]
labelled_buttons = [stbt.Region(_x, _y, width=135, height=44) for _x, _y in [
(1, 65), (6, 137)]]
overlapping_button = stbt.Region(123, 223, width=135, height=44)
overlapped_button = stbt.Region(3, 223, width=135, height=44)
@pytest.mark.parametrize("match_method", [
stbt.MatchMethod.SQDIFF,
stbt.MatchMethod.SQDIFF_NORMED,
stbt.MatchMethod.CCORR_NORMED,
stbt.MatchMethod.CCOEFF_NORMED,
])
def test_that_match_all_finds_all_matches(match_method):
matches = list(m.region for m in stbt.match_all(