import steeldesign as sd
import matplotlib.pyplot as plt
Long = [
300, 500, 700, 1000, 1200, 1500, 1800, 2000, 2200, 2500, 2800, 3000, 3500,
5000
]
# creo un perfil con refuerzo de labios
p1 = sd.c_w_lps_profile(H=100, B=50, D=12, t=1.5, r_out=3.75)
# creo un acero
s = sd.steel(FY=337,
E0=180510.0,
nu=0.3,
n=13.5,
offset=0.002,
name='SA304_1_4Hard')
FTB = []
FBx = []
FBy = []
TB = []
for L in Long:
# defino parametros de diseño
dp = sd.designParameters(Kx=0.5, Ky=0.5, Kz=0.5)
# creo un miembro
m = sd.member(L=L, profile=p1, steel=s, designParameters=dp)
# creo el analisis
analysis = sd.ASCE_8_02(m)
# calculo admisibles
'''Example 17.1 I-Section (LRFD).
Lin, Shin-Hua; Yu, Wei-wen; and Galambos, Theodore V., "Illustrative examples based on the ASCE
standard specifcation for the design of cold-formed stainless steel structural members" (1991). Center
for Cold-Formed Steel Structures Library. p221
'''
import steeldesign as sd
# creo un perfil c on refuerz ode labios
p1 = sd.I_builtup_c_profile(H= 6, B= 1.5, t= 0.135, r_out= (0.135+3/16) )
p2 = sd.c_profile(H= 6, B= 1.5, t= 0.135, r_out= (0.135+3/16) )
p2.calculate(loadProfileFromDB=True)
# creo un acero
s = sd.steel(FY= 30, E0= 27000, nu= 0.3, n= 9.7, offset= 0.002, name= 'SA409_long')
# defino parametros de diseño
dp = sd.designParameters(Lx= 14*12, Ly= 7*12, Lz= 7*12)
# creo un miembro
m = sd.member(L= 14*12, profile= p1, steel= s, designParameters= dp)
p1.J = 2*p2.J
# creo el analisis
analysis = sd.ASCE_8_02(m)
# calculo admisibles #
fiPn, midC = analysis.s3_4()
print('fiPn =', round(fiPn,2),'| Pn =', round(midC['Fn_FBy']*midC['Ae'],2))
print('Esbeltez de', m.profile.elements[1]['name'],'=', round(m.profile.elements[1]['sec 3.4-fiPn']['esbeltez'],2))
print('Esbeltez de', m.profile.elements[2]['name'],'=', round(m.profile.elements[2]['sec 3.4-fiPn']['esbeltez'],2))
'''Example 3.1 c-Section wlps (LRFD).
Lin, Shin-Hua; Yu, Wei-wen; and Galambos, Theodore V., "Illustrative examples based on the ASCE
standard specifcation for the design of cold-formed stainless steel structural members" (1991). Center
for Cold-Formed Steel Structures Library. p44
'''
import steeldesign as sd
# creo perfil
p1 = sd.c_w_lps_profile(H=6.0, B=1.625, D=0.60, t=0.06, r_out=(0.06 + 3 / 32))
# creo material
s = sd.steel(FY=50,
E0=27000,
nu=0.3,
n=4.58,
offset=0.002,
name='SA301_1_4Hard')
# parametros de diseño
dp = sd.designParameters()
# creo un miembro
m = sd.member(L=100, profile=p1, steel=s, designParameters=dp)
# creo el analisis
analysis = sd.ASCE_8_02(m)
fiMn, midC = analysis.s3_3_1()
print('Mn_no =', round(midC['Mn_no'], 2), '| fiMn_no =',
round(midC['fiMn_no'], 2))
# Valores de referencia: Mn_no = 51.45 | fiMn_no = 46.31
# Valores de steeldesign: Mn_no = 51.38 | fiMn_no = 46.24
'''
Revised ASCE specification for the design of cold-formed stainless steel
Shin-Hua Lina, Wei-Wen Yu
Engineering Structures 2005
doi:10.1016/j.engstruct.2005.03.007
'''
import steeldesign as sd
# creo un perfil c on refuerz ode labios
p1 = sd.c_w_lps_profile(H=88.9, B=50.8, D=22.86, t=2.67, r_out=(4.76 + 2.67))
# creo un acero
s = sd.steel(FY=344.8,
E0=186200,
nu=0.3,
n=4.58,
offset=0.002,
name='SA304_1_4_hard')
# defino parametros de diseño
dp = sd.designParameters()
# creo un miembro
m = sd.member(L=1828.8, profile=p1, steel=s, designParameters=dp)
# creo el analisis
analysis = sd.ASCE_8_02(m)
# calculo admisibles #
fiPn, midC = analysis.s3_4()
print('fiPn =', round(fiPn, 2), '| Fn_FBy =', round(midC['Fn_FBy'], 2),
'| Fn_FTB =', round(midC['Fn_FTB'], 2), '| Ae', round(midC['Ae'], 2))
# Valores de referencia: fiPn = 68500.00 | Fn_FBy = 159.4 | Fn_FTB = 128.8 | Ae 573.5