def plates(machine):
#
# Make the target directory
#
target_dir = machine + "/stls/printed"
if os.path.isdir(target_dir):
shutil.rmtree(target_dir)
os.makedirs(target_dir)
#
# Make the stls in the list
#
if machine == "dibond":
plate_list.remove("cable_clips.stl")
used = stls(machine, plate_list)
#
# Move them to the plates directory
#
for file in plate_list:
shutil.move(machine + "/stls/" + file, target_dir + "/" + file)
#
# Copy all the stls that are not in the plates to the plates directory
#
for file in bom_to_stls(machine):
path = machine + "/stls/" + file
if not file in used:
if os.path.isfile(path):
shutil.copy(path, target_dir + "/" + file)
else:
print "can't find %s to copy" % path
def plates(machine):
#
# Make the target directory
#
target_dir = machine + "/stls/printed"
if os.path.isdir(target_dir):
shutil.rmtree(target_dir)
os.makedirs(target_dir)
#
# Make the stls in the list
#
if machine == "dibond" or machine == "huxley":
plate_list.remove("cable_clips.stl");
used = stls(machine, plate_list)
#
# Move them to the plates directory
#
for file in plate_list:
shutil.move(machine + "/stls/"+ file, target_dir + "/" + file)
#
# Copy all the stls that are not in the plates to the plates directory
#
for file in bom_to_stls(machine):
path = machine + "/stls/"+ file
if not file in used:
if os.path.isfile(path):
shutil.copy(path, target_dir + "/" + file)
else:
print("can't find %s to copy" % path)
def accessories(machine, assembly=None):
assemblies = [
"raspberry_pi_assembly", "raspberry_pi_camera_assembly",
"light_strip_assembly", "z_limit_switch_assembly"
]
#
# Make the target directory
#
target_dir = machine + "/stls/accessories"
if os.path.isdir(target_dir):
if not assembly:
shutil.rmtree(
target_dir) #if making all of them clear the directory first
os.makedirs(target_dir)
else:
os.makedirs(target_dir)
if assembly:
assemblies = [assembly]
for assembly in assemblies:
print(assembly)
bom.boms(machine, assembly)
stl_list = stls.bom_to_stls(machine, assembly)
stls.stls(machine, stl_list)
#
# Move all the stls that are not in the plates to the plates directory
#
for file in stl_list:
src = machine + "/stls/" + file
if os.path.isfile(src):
shutil.move(src, target_dir + "/" + file)
else:
print("can't find %s to move" % src)
def plates(machine):
#
# Make the target directory
#
target_dir = machine + "/stls/printed"
if os.path.isdir(target_dir):
shutil.rmtree(target_dir)
os.makedirs(target_dir)
#
# Make the stls in the list
#
if not machine in ["sturdy", "mendel"]:
plate_list.remove("cable_clips.stl")
if machine == "huxley":
plate_list.remove("atx_brackets.stl")
plate_list.remove("wades_extruder.stl")
plate_list.append("direct_extruder.stl")
used = stls(machine, plate_list)
#
# Move them to the plates directory
#
for file in plate_list:
shutil.move(machine + "/stls/"+ file, target_dir + "/" + file)
#
# Copy all the stls that are not in the plates to the plates directory
#
for file in bom_to_stls(machine):
path = machine + "/stls/"+ file
if not file in used:
if os.path.isfile(path):
shutil.copy(path, target_dir + "/" + file)
else:
print("can't find %s to copy" % path)
def accessories(machine, assembly = None):
assemblies = ["raspberry_pi_assembly", "raspberry_pi_camera_assembly", "light_strip_assembly" ]
#
# Make the target directory
#
target_dir = machine + "/stls/accessories"
if os.path.isdir(target_dir):
if not assembly:
shutil.rmtree(target_dir) #if making all of them clear the directory first
os.makedirs(target_dir)
else:
os.makedirs(target_dir)
if assembly:
assemblies = [ assembly ]
for assembly in assemblies:
print(assembly)
bom.boms(machine, assembly)
stl_list = stls.bom_to_stls(machine, assembly)
stls.stls(machine, stl_list)
#
# Move all the stls that are not in the plates to the plates directory
#
for file in stl_list:
src = machine + "/stls/"+ file
if os.path.isfile(src):
shutil.move(src, target_dir + "/" + file)
else:
print("can't find %s to move" % src)
def plates(machine):
plate_list = [
"cal.stl",
"atx_brackets.stl",
"bar_clamps.stl",
"cable_clips.stl",
"d_motor_brackets.stl",
"fixing_blocks.stl",
"ribbon_clamps.stl",
"small_bits.stl",
"spool_holder_brackets.stl",
"wades_extruder.stl",
"x_carriage_parts.stl",
"y_bearing_mounts.stl",
"y_belt_anchors.stl",
"z_motor_brackets.stl"
]
#
# Make the target directory
#
target_dir = machine + "/stls/printed"
if os.path.isdir(target_dir):
shutil.rmtree(target_dir)
sleep(0.1)
os.makedirs(target_dir)
#
# Make the stls in the list
#
if not machine in ["sturdy", "sturdy_E3D", "mendel"]:
plate_list.remove("cable_clips.stl")
if machine == "huxley":
plate_list.remove("atx_brackets.stl")
plate_list.remove("wades_extruder.stl")
plate_list.append("direct_extruder.stl")
used = stls(machine, plate_list)
#
# Move them to the plates directory
#
for file in plate_list:
shutil.move(machine + "/stls/"+ file, target_dir + "/" + file)
#
# Copy all the stls that are not in the plates to the plates directory
#
for file in bom_to_stls(machine):
path = machine + "/stls/"+ file
if not file in used:
if os.path.isfile(path):
shutil.copy(path, target_dir + "/" + file)
else:
print("can't find %s to copy" % path)
def plates(machine):
plate_list = [
"cal.stl", "atx_brackets.stl", "bar_clamps.stl", "cable_clips.stl",
"d_motor_brackets.stl", "fixing_blocks.stl", "ribbon_clamps.stl",
"small_bits.stl", "spool_holder_brackets.stl", "wades_extruder.stl",
"x_carriage_parts.stl", "y_bearing_mounts.stl", "y_belt_anchors.stl",
"z_motor_brackets.stl"
]
#
# Make the target directory
#
target_dir = machine + "/stls/printed"
if os.path.isdir(target_dir):
shutil.rmtree(target_dir)
sleep(0.1)
os.makedirs(target_dir)
#
# Make the stls in the list
#
if not machine in ["sturdy", "sturdy_E3D", "mendel"]:
plate_list.remove("cable_clips.stl")
if machine == "huxley":
plate_list.remove("atx_brackets.stl")
plate_list.remove("wades_extruder.stl")
plate_list.append("direct_extruder.stl")
used = stls(machine, plate_list)
#
# Move them to the plates directory
#
for file in plate_list:
shutil.move(machine + "/stls/" + file, target_dir + "/" + file)
#
# Copy all the stls that are not in the plates to the plates directory
#
for file in bom_to_stls(machine):
path = machine + "/stls/" + file
if not file in used:
if os.path.isfile(path):
shutil.copy(path, target_dir + "/" + file)
else:
print("can't find %s to copy" % path)
def stls(machine, parts=None):
#
# Make the target directory
#
target_dir = machine + "/stls"
if os.path.isdir(target_dir):
if not parts:
shutil.rmtree(
target_dir) #if making the BOM clear the directory first
os.makedirs(target_dir)
else:
os.makedirs(target_dir)
#
# Set the target machine
#
f = open("scad/conf/machine.scad", "wt")
f.write("include <%s_config.scad>\n" % machine)
f.close()
#
# Decide which files to make
#
if parts:
targets = list(
parts) #copy the list so we dont modify the list passed in
else:
targets = bom_to_stls(machine)
#
# Find all the scad files
#
used = []
for filename in os.listdir(source_dir):
if filename[-5:] == ".scad":
#
# find any modules ending in _stl
#
for line in open(source_dir + "/" + filename, "r").readlines():
words = line.split()
if (len(words) and words[0] == "module"):
module = words[1].split('(')[0]
stl = module.replace("_stl", ".stl")
if stl in targets:
#
# make a file to use the module
#
stl_maker_name = source_dir + "/stl.scad"
f = open(stl_maker_name, "w")
f.write("use <%s>\n" % filename)
f.write("%s();\n" % module)
f.close()
#
# Run openscad on the created file
#
stl_name = target_dir + "/" + module[:-4] + ".stl"
openscad.run("-D$bom=1", "-o", stl_name,
stl_maker_name)
c14n_stl.canonicalise(stl_name)
targets.remove(stl)
#
# Add the files on the BOM to the used list for plates.py
#
for line in open("openscad.log"):
if line[:7] == 'ECHO: "' and line[-6:] == '.stl"\n':
used.append(line[7:-2])
#
# List the ones we didn't find
#
for module in targets:
print "Could not find", module
return used
def stls(machine, parts = None):
#
# Make the target directory
#
target_dir = machine + "/stls"
if os.path.isdir(target_dir):
if not parts:
shutil.rmtree(target_dir) #if making the BOM clear the directory first
os.makedirs(target_dir)
else:
os.makedirs(target_dir)
#
# Set the target machine
#
f = open("scad/conf/machine.scad","wt")
f. write("include <%s_config.scad>\n" % machine);
f.close()
#
# Decide which files to make
#
if parts:
targets = list(parts) #copy the list so we dont modify the list passed in
else:
targets = bom_to_stls(machine)
#
# Find all the scad files
#
used = []
for filename in os.listdir(source_dir):
if filename[-5:] == ".scad":
#
# find any modules ending in _stl
#
for line in open(source_dir + "/" + filename, "r").readlines():
words = line.split()
if(len(words) and words[0] == "module"):
module = words[1].split('(')[0]
stl = module.replace("_stl", ".stl")
if stl in targets:
#
# make a file to use the module
#
stl_maker_name = source_dir + "/stl.scad"
f = open(stl_maker_name, "w")
f.write("use <%s>\n" % filename)
f.write("%s();\n" % module);
f.close()
#
# Run openscad on the created file
#
stl_name = target_dir + "/" + module[:-4] + ".stl"
openscad.run("-D$bom=1","-o", stl_name, stl_maker_name)
c14n_stl.canonicalise(stl_name)
targets.remove(stl)
#
# Add the files on the BOM to the used list for plates.py
#
for line in open("openscad.log"):
if line[:7] == 'ECHO: "' and line[-6:] == '.stl"\n':
used.append(line[7:-2])
#
# List the ones we didn't find
#
for module in targets:
print "Could not find", module
return used